RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>0002-6210-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-6210-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-6210-01) </PackageDescription>
    <NDC11Code>00002-6210-11</NDC11Code>
    <ProductNDC>0002-6210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0268-6210-06</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (0268-6210-06) </PackageDescription>
    <NDC11Code>00268-6210-06</NDC11Code>
    <ProductNDC>0268-6210</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Rye Grain</ProprietaryName>
    <NonProprietaryName>Secale Cereale</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS</RouteName>
    <StartMarketingDate>19980223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103753</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>RYE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Grain Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These products are for diagnostic use only. Diagnostic allergenic extracts are indicated for use in skin testing to establish the clinical relevance of specific allergens to which the patient has been exposed. By measuring skin test response, the physician may assess the degree of sensitivity that patients have to the allergens. For extracts standardized in AU and BAU, see individual directions for use. Allergenic extracts for diagnostic use only of coffee, mosquito, cottonseed, and flaxseed have not been shown by adequate data to be safe and effective for therapeutic use.</IndicationAndUsage>
    <Description>Sterile diagnostic extracts are supplied in either phenol-saline diluent for Intradermal Testing or in diluent containing glycerin 50% (v/v) for Percutaneous Testing and phenol 0.4% (preservative). Inactive ingredients may include: sodium chloride for isotonicity, glycerin, and sodium bicarbonate as a buffer. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and after final packaging, they are tested for sterility and safety. Molds are individwually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds (fungi) are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Foods, miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline or glycerin, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
  </NDC>
  <NDC>
    <NDCCode>0268-6210-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL (0268-6210-10) </PackageDescription>
    <NDC11Code>00268-6210-10</NDC11Code>
    <ProductNDC>0268-6210</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Rye Grain</ProprietaryName>
    <NonProprietaryName>Secale Cereale</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS</RouteName>
    <StartMarketingDate>19980223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103753</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>RYE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Grain Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These products are for diagnostic use only. Diagnostic allergenic extracts are indicated for use in skin testing to establish the clinical relevance of specific allergens to which the patient has been exposed. By measuring skin test response, the physician may assess the degree of sensitivity that patients have to the allergens. For extracts standardized in AU and BAU, see individual directions for use. Allergenic extracts for diagnostic use only of coffee, mosquito, cottonseed, and flaxseed have not been shown by adequate data to be safe and effective for therapeutic use.</IndicationAndUsage>
    <Description>Sterile diagnostic extracts are supplied in either phenol-saline diluent for Intradermal Testing or in diluent containing glycerin 50% (v/v) for Percutaneous Testing and phenol 0.4% (preservative). Inactive ingredients may include: sodium chloride for isotonicity, glycerin, and sodium bicarbonate as a buffer. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and after final packaging, they are tested for sterility and safety. Molds are individwually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds (fungi) are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Foods, miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline or glycerin, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-6210-0</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (50090-6210-0) </PackageDescription>
    <NDC11Code>50090-6210-00</NDC11Code>
    <ProductNDC>50090-6210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130419</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203145</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>160; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure &lt;140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure &lt;90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure &lt;130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure &lt;80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of &lt; 140 mmHg (systolic) and 60% likelihood of achieving &lt; 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
    <Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is:. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-1436-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-1436-11)  / 1 mL in 1 SYRINGE (0002-1436-01) </PackageDescription>
    <NDC11Code>00002-1436-11</NDC11Code>
    <ProductNDC>0002-1436</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Emgality</ProprietaryName>
    <NonProprietaryName>Galcanezumab-gnlm</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20180927</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761063</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>GALCANEZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EMGALITY® is a calcitonin-gene related peptide antagonist indicated in adults for the: : 1 preventive treatment of migraine. (1.1) , 2 treatment of episodic cluster headache. (1.2) .</IndicationAndUsage>
    <Description>Galcanezumab-gnlm is a humanized IgG4 monoclonal antibody specific for calcitonin-gene related peptide (CGRP) ligand. Galcanezumab-gnlm is produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. Galcanezumab-gnlm is composed of two identical immunoglobulin kappa light chains and two identical immunoglobulin gamma heavy chains and has an overall molecular weight of approximately 147 kDa. EMGALITY (galcanezumab-gnlm) injection is a sterile, preservative-free, clear to opalescent and colorless to slightly yellow to slightly brown solution, for subcutaneous use. EMGALITY is supplied in a 1 mL single-dose prefilled pen to deliver 120 mg of galcanezumab-gnlm or a 1 mL single-dose prefilled syringe to deliver 100 mg or 120 mg of galcanezumab-gnlm. Each mL of solution contains 100 mg or 120 mg of galcanezumab-gnlm; L-histidine (0.5 mg); L-histidine hydrochloride monohydrate (1.5 mg); Polysorbate 80 (0.5 mg); Sodium Chloride (8.8 mg); Water for Injection, USP. The pH range is 5.3 - 6.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-1442-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-1442-11)  / 2 mL in 1 SYRINGE (0002-1442-01) </PackageDescription>
    <NDC11Code>00002-1442-11</NDC11Code>
    <ProductNDC>0002-1442</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Omvoh</ProprietaryName>
    <NonProprietaryName>Mirikizumab-mrkz</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20251023</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761279</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>MIRIKIZUMAB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>OMVOH is indicated for the treatment of: : 1 moderately to severely active ulcerative colitis in adults. , 2 moderately to severely active Crohn's disease in adults. .</IndicationAndUsage>
    <Description>Mirikizumab-mrkz is a humanized immunoglobulin G4 (IgG4) variant monoclonal antibody that is directed against the p19 subunit of IL-23 and does not bind IL-12. Mirikizumab-mrkz is produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology and it is composed of two identical light chain polypeptides and two identical heavy chain polypeptides with an overall molecular weight of approximately 147 kDa.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-1445-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-1445-11)  / 1 mL in 1 SYRINGE (0002-1445-01) </PackageDescription>
    <NDC11Code>00002-1445-11</NDC11Code>
    <ProductNDC>0002-1445</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Taltz</ProprietaryName>
    <NonProprietaryName>Ixekizumab</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20160322</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125521</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>IXEKIZUMAB</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-17A Antagonist [EPC], Interleukin-17A Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160322</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TALTZ® is a humanized interleukin-17A antagonist indicated for the treatment of: : 1 patients aged 6 years or older with moderate-to-severe plaque psoriasis who are candidates for systemic therapy or phototherapy. (1.1) , 2 adults with active psoriatic arthritis. (1.2) , 3 adults with active ankylosing spondylitis. (1.3) , 4 adults with active non-radiographic axial spondyloarthritis with objective signs of inflammation. (1.4) .</IndicationAndUsage>
    <Description>Ixekizumab is a humanized immunoglobulin G subclass 4 (IgG4) monoclonal antibody (mAb) with neutralizing activity against IL-17A. Ixekizumab is produced by recombinant DNA technology in a recombinant mammalian cell line and purified using standard technology for bioprocessing. Ixekizumab is comprised of two identical light chain polypeptides of 219 amino acids each and two identical heavy chain polypeptides of 445 amino acids each and has a molecular weight of 146,158 Daltons for the protein backbone of the molecule. TALTZ injection is a sterile, preservative free, clear and colorless to slightly yellow solution, for subcutaneous use available as 80 mg of ixekizumab in a 1 mL single-dose prefilled autoinjector or a single-dose prefilled syringe, 40 mg of ixekizumab in a 0.5 mL single-dose prefilled syringe, or 20 mg of ixekizumab in a 0.25 mL single-dose prefilled syringe. The prefilled autoinjector and prefilled syringe each contain a 1 mL glass syringe with a fixed 27 gauge ½ inch needle. The TALTZ 80 mg prefilled autoinjector and prefilled syringe are manufactured to deliver 80 mg of ixekizumab. The TALTZ 40 mg prefilled syringe is manufactured to deliver 40 mg of ixekizumab. The TALTZ 20 mg prefilled syringe is manufactured to deliver 20 mg of ixekizumab. Each TALTZ 80 mg/mL single-dose autoinjector or TALTZ 80 mg/mL single-dose prefilled syringe is composed of ixekizumab (80 mg); Polysorbate 80, USP (0.3 mg); Sucrose, USP (80 mg); and Water for Injection, USP. Sodium Hydroxide, USP-NF, may have been added to adjust pH. The TALTZ solution has a pH of 5.2 –  6.2. Each TALTZ 40 mg/0.5 mL single-dose prefilled syringe is composed of ixekizumab (40 mg); Polysorbate 80, USP (0.15 mg); Sucrose, USP (40 mg); and Water for Injection, USP. Sodium Hydroxide, USP-NF, may have been added to adjust pH. The TALTZ solution has a pH of 5.2 –  6.2. Each TALTZ 20 mg/0.25 mL single-dose prefilled syringe is composed of ixekizumab (20 mg); Polysorbate 80, USP (0.08 mg); Sucrose, USP (20 mg); and Water for Injection, USP. Sodium Hydroxide, USP-NF, may have been added to adjust pH. The TALTZ solution has a pH of 5.2 –  6.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-2377-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-2377-11)  / 1 mL in 1 SYRINGE (0002-2377-01) </PackageDescription>
    <NDC11Code>00002-2377-11</NDC11Code>
    <ProductNDC>0002-2377</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Emgality</ProprietaryName>
    <NonProprietaryName>Galcanezumab-gnlm</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20180927</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761063</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>GALCANEZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EMGALITY® is a calcitonin-gene related peptide antagonist indicated in adults for the: : 1 preventive treatment of migraine. (1.1) , 2 treatment of episodic cluster headache. (1.2) .</IndicationAndUsage>
    <Description>Galcanezumab-gnlm is a humanized IgG4 monoclonal antibody specific for calcitonin-gene related peptide (CGRP) ligand. Galcanezumab-gnlm is produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. Galcanezumab-gnlm is composed of two identical immunoglobulin kappa light chains and two identical immunoglobulin gamma heavy chains and has an overall molecular weight of approximately 147 kDa. EMGALITY (galcanezumab-gnlm) injection is a sterile, preservative-free, clear to opalescent and colorless to slightly yellow to slightly brown solution, for subcutaneous use. EMGALITY is supplied in a 1 mL single-dose prefilled pen to deliver 120 mg of galcanezumab-gnlm or a 1 mL single-dose prefilled syringe to deliver 100 mg or 120 mg of galcanezumab-gnlm. Each mL of solution contains 100 mg or 120 mg of galcanezumab-gnlm; L-histidine (0.5 mg); L-histidine hydrochloride monohydrate (1.5 mg); Polysorbate 80 (0.5 mg); Sodium Chloride (8.8 mg); Water for Injection, USP. The pH range is 5.3 - 6.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3116-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3116-11)  / 2 mL in 1 SYRINGE (0002-3116-01) </PackageDescription>
    <NDC11Code>00002-3116-11</NDC11Code>
    <ProductNDC>0002-3116</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Omvoh</ProprietaryName>
    <NonProprietaryName>Mirikizumab-mrkz</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20251023</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761279</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>MIRIKIZUMAB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>OMVOH is indicated for the treatment of: : 1 moderately to severely active ulcerative colitis in adults. , 2 moderately to severely active Crohn's disease in adults. .</IndicationAndUsage>
    <Description>Mirikizumab-mrkz is a humanized immunoglobulin G4 (IgG4) variant monoclonal antibody that is directed against the p19 subunit of IL-23 and does not bind IL-12. Mirikizumab-mrkz is produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology and it is composed of two identical light chain polypeptides and two identical heavy chain polypeptides with an overall molecular weight of approximately 147 kDa.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3411-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3411-11)  / 2.4 mL in 1 SYRINGE (0002-3411-01) </PackageDescription>
    <NDC11Code>00002-3411-11</NDC11Code>
    <ProductNDC>0002-3411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3422-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3422-11)  / 2.4 mL in 1 SYRINGE (0002-3422-01) </PackageDescription>
    <NDC11Code>00002-3422-11</NDC11Code>
    <ProductNDC>0002-3422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>20.8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3433-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3433-11)  / 2.4 mL in 1 SYRINGE (0002-3433-01) </PackageDescription>
    <NDC11Code>00002-3433-11</NDC11Code>
    <ProductNDC>0002-3433</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>16.7</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3444-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3444-11)  / 2.4 mL in 1 SYRINGE (0002-3444-01) </PackageDescription>
    <NDC11Code>00002-3444-11</NDC11Code>
    <ProductNDC>0002-3444</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3455-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3455-11)  / 2.4 mL in 1 SYRINGE (0002-3455-01) </PackageDescription>
    <NDC11Code>00002-3455-11</NDC11Code>
    <ProductNDC>0002-3455</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>8.33</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3466-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3466-11)  / 2.4 mL in 1 SYRINGE (0002-3466-01) </PackageDescription>
    <NDC11Code>00002-3466-11</NDC11Code>
    <ProductNDC>0002-3466</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>4.17</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3511-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3511-11)  / 2.4 mL in 1 SYRINGE (0002-3511-01) </PackageDescription>
    <NDC11Code>00002-3511-11</NDC11Code>
    <ProductNDC>0002-3511</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3522-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3522-11)  / 2.4 mL in 1 SYRINGE (0002-3522-01) </PackageDescription>
    <NDC11Code>00002-3522-11</NDC11Code>
    <ProductNDC>0002-3522</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>20.8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3533-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3533-11)  / 2.4 mL in 1 SYRINGE (0002-3533-01) </PackageDescription>
    <NDC11Code>00002-3533-11</NDC11Code>
    <ProductNDC>0002-3533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>16.7</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3544-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3544-11)  / 2.4 mL in 1 SYRINGE (0002-3544-01) </PackageDescription>
    <NDC11Code>00002-3544-11</NDC11Code>
    <ProductNDC>0002-3544</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3555-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3555-11)  / 2.4 mL in 1 SYRINGE (0002-3555-01) </PackageDescription>
    <NDC11Code>00002-3555-11</NDC11Code>
    <ProductNDC>0002-3555</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>8.33</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-3566-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-3566-11)  / 2.4 mL in 1 SYRINGE (0002-3566-01) </PackageDescription>
    <NDC11Code>00002-3566-11</NDC11Code>
    <ProductNDC>0002-3566</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260120</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>4.17</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4052-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4052-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4052-01) </PackageDescription>
    <NDC11Code>00002-4052-11</NDC11Code>
    <ProductNDC>0002-4052</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>4.17</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4103-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4103-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4103-01) </PackageDescription>
    <NDC11Code>00002-4103-11</NDC11Code>
    <ProductNDC>0002-4103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>8.33</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4210-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4210-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4210-01) </PackageDescription>
    <NDC11Code>00002-4210-11</NDC11Code>
    <ProductNDC>0002-4210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4304-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4304-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4304-01) </PackageDescription>
    <NDC11Code>00002-4304-11</NDC11Code>
    <ProductNDC>0002-4304</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>16.7</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4523-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4523-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4523-01) </PackageDescription>
    <NDC11Code>00002-4523-11</NDC11Code>
    <ProductNDC>0002-4523</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>20.8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-4612-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-4612-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-4612-01) </PackageDescription>
    <NDC11Code>00002-4612-11</NDC11Code>
    <ProductNDC>0002-4612</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mounjaro</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215866</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
    <Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-5137-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-5137-11)  / 3 mL in 1 SYRINGE (0002-5137-01) </PackageDescription>
    <NDC11Code>00002-5137-11</NDC11Code>
    <ProductNDC>0002-5137</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onswik</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Insulin Efsitora Alfa-gobe</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260923</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761408</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>INSULIN EFSITORA ALFA</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-5240-11</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (0002-5240-11)  / 3 mL in 1 SYRINGE (0002-5240-01) </PackageDescription>
    <NDC11Code>00002-5240-11</NDC11Code>
    <ProductNDC>0002-5240</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onswik</ProprietaryName>
    <ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
    <NonProprietaryName>Insulin Efsitora Alfa-gobe</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260923</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761408</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>INSULIN EFSITORA ALFA</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-6052-11</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-6052-11)  / 2.4 mL in 1 VIAL, MULTI-DOSE (0002-6052-01) </PackageDescription>
    <NDC11Code>00002-6052-11</NDC11Code>
    <ProductNDC>0002-6052</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zepbound</ProprietaryName>
    <NonProprietaryName>Tirzepatide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217806</ApplicationNumber>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>TIRZEPATIDE</SubstanceName>
    <StrengthNumber>4.17</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
    <Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
  </NDC>
</NDCList>