{
"NDC": [
{
"NDCCode": "0049-0530-22",
"PackageDescription": "1 VIAL in 1 CARTON (0049-0530-22) / 1 POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "00049-0530-22",
"ProductNDC": "0049-0530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pfizerpen",
"NonProprietaryName": "Penicillin G Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060657",
"LabelerName": "Roerig",
"SubstanceName": "PENICILLIN G POTASSIUM",
"StrengthNumber": "20000000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100601",
"SamplePackage": "N",
"IndicationAndUsage": "Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5."
},
{
"NDCCode": "0049-0530-28",
"PackageDescription": "1 VIAL in 1 CARTON (0049-0530-28) / 1 POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "00049-0530-28",
"ProductNDC": "0049-0530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pfizerpen",
"NonProprietaryName": "Penicillin G Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060657",
"LabelerName": "Roerig",
"SubstanceName": "PENICILLIN G POTASSIUM",
"StrengthNumber": "20000000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100601",
"SamplePackage": "N",
"IndicationAndUsage": "Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5."
},
{
"NDCCode": "0049-0530-44",
"PackageDescription": "1 POWDER, FOR SOLUTION in 1 VIAL (0049-0530-44)",
"NDC11Code": "00049-0530-44",
"ProductNDC": "0049-0530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pfizerpen",
"NonProprietaryName": "Penicillin G Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060657",
"LabelerName": "Roerig",
"SubstanceName": "PENICILLIN G POTASSIUM",
"StrengthNumber": "20000000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0049-0520-22",
"PackageDescription": "10 VIAL in 1 CARTON (0049-0520-22) / 1 POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "00049-0520-22",
"ProductNDC": "0049-0520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pfizerpen",
"NonProprietaryName": "Penicillin G Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAPLEURAL; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060657",
"LabelerName": "Roerig",
"SubstanceName": "PENICILLIN G POTASSIUM",
"StrengthNumber": "5000000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100601",
"SamplePackage": "N",
"IndicationAndUsage": "Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5."
},
{
"NDCCode": "37000-049-22",
"PackageDescription": "1 TUBE in 1 CARTON (37000-049-22) / 62 g in 1 TUBE",
"NDC11Code": "37000-0049-22",
"ProductNDC": "37000-049",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kids Crest Cavity Protection",
"ProprietaryNameSuffix": "Sparkle Fun",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "PASTE, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20020905",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M021",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190107",
"SamplePackage": "N",
"IndicationAndUsage": "helps protect against cavities."
},
{
"NDCCode": "58933-049-22",
"PackageDescription": "1 TUBE in 1 CARTON (58933-049-22) / 62 g in 1 TUBE",
"NDC11Code": "58933-0049-22",
"ProductNDC": "58933-049",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kids Crest Cavity Protection",
"ProprietaryNameSuffix": "Sparkle Fun",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "PASTE, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20020905",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M021",
"LabelerName": "Procter & Gamble Manufactura, S. de R.L. de C.V.",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "helps protect against cavities."
},
{
"NDCCode": "0310-0530-10",
"PackageDescription": "12500 TABLET, EXTENDED RELEASE in 1 BAG (0310-0530-10) ",
"NDC11Code": "00310-0530-10",
"ProductNDC": "0310-0530",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Quetiapine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"StartMarketingDate": "20220422",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2025-12-23",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "22-APR-22"
},
{
"NDCCode": "43742-0530-1",
"PackageDescription": "960 mL in 1 BOTTLE (43742-0530-1) ",
"NDC11Code": "43742-0530-01",
"ProductNDC": "43742-0530",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Toxoplasma Gondii",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20141110",
"EndMarketingDate": "20240914",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Deseret Biologicals, Inc",
"SubstanceName": "TOXOPLASMA GONDII",
"StrengthNumber": "90",
"StrengthUnit": "[hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "22-NOV-16",
"EndMarketingDatePackage": "14-SEP-24"
},
{
"NDCCode": "44114-530-80",
"PackageDescription": "80 g in 1 TUBE (44114-530-80) ",
"NDC11Code": "44114-0530-80",
"ProductNDC": "44114-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Laspa Mineral Sunscreen",
"NonProprietaryName": "Spf 30 Moisturizing Mineral Sunscreen",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20211129",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Vegewax Candleworx Ltd",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "20",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2021-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20211129",
"SamplePackage": "N"
},
{
"NDCCode": "63190-0530-3",
"PackageDescription": "30 kg in 1 DRUM (63190-0530-3) ",
"NDC11Code": "63190-0530-03",
"ProductNDC": "63190-0530",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dalfampridine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100122",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Industriale Chimica s.r.l.",
"SubstanceName": "DALFAMPRIDINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2022-11-29",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "22-JAN-10"
},
{
"NDCCode": "63190-0530-5",
"PackageDescription": "1 kg in 1 DRUM (63190-0530-5) ",
"NDC11Code": "63190-0530-05",
"ProductNDC": "63190-0530",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dalfampridine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100122",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Industriale Chimica s.r.l.",
"SubstanceName": "DALFAMPRIDINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2022-11-29",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "22-JAN-10"
},
{
"NDCCode": "64406-530-01",
"PackageDescription": "1 kg in 1 BOTTLE (64406-530-01) ",
"NDC11Code": "64406-0530-01",
"ProductNDC": "64406-530",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Efanesoctocog Alfa",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20230222",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Biogen Inc.",
"SubstanceName": "EFANESOCTOCOG ALFA",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-05-09",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "22-FEB-23"
},
{
"NDCCode": "71205-530-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (71205-530-30) ",
"NDC11Code": "71205-0530-30",
"ProductNDC": "71205-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078420",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "71205-530-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (71205-530-60) ",
"NDC11Code": "71205-0530-60",
"ProductNDC": "71205-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078420",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "71205-530-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-530-90) ",
"NDC11Code": "71205-0530-90",
"ProductNDC": "71205-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078420",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "0049-0013-83",
"PackageDescription": "10 VIAL in 1 CARTON (0049-0013-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0013-81) ",
"NDC11Code": "00049-0013-83",
"ProductNDC": "0049-0013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Unasyn",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19911122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050608",
"LabelerName": "Roerig",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19911122",
"SamplePackage": "N",
"IndicationAndUsage": "UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0049-0014-83",
"PackageDescription": "10 VIAL in 1 CARTON (0049-0014-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0014-81) ",
"NDC11Code": "00049-0014-83",
"ProductNDC": "0049-0014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Unasyn",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19911122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050608",
"LabelerName": "Roerig",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19911122",
"SamplePackage": "N",
"IndicationAndUsage": "UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0049-0024-28",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (0049-0024-28) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "00049-0024-28",
"ProductNDC": "0049-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Unasyn",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19911122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050608",
"LabelerName": "Roerig",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "100; 50",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19911122",
"SamplePackage": "N",
"IndicationAndUsage": "UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. UNASYN pharmacy bulk package is a vial containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of UNASYN for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DIRECTIONS FOR USE–Directions for Proper Use of Pharmacy Bulk Package section). Each 15 g vial contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.627 g ampicillin sodium and 5.470 g sulbactam sodium). Each 1.5 g of UNASYN contains approximately 115 mg of sodium."
},
{
"NDCCode": "0049-0050-01",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0049-0050-01) / 60 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00049-0050-01",
"ProductNDC": "0049-0050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "ORAL",
"StartMarketingDate": "20170106",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020990",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170106",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "0049-0174-02",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-02) ",
"NDC11Code": "00049-0174-02",
"ProductNDC": "0049-0174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucotrol",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130509",
"EndMarketingDate": "20270731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020329",
"LabelerName": "Roerig",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130509",
"EndMarketingDatePackage": "20270731",
"SamplePackage": "N",
"IndicationAndUsage": "GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823)."
},
{
"NDCCode": "0049-0174-03",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-03) ",
"NDC11Code": "00049-0174-03",
"ProductNDC": "0049-0174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucotrol",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130509",
"EndMarketingDate": "20270731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020329",
"LabelerName": "Roerig",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130509",
"EndMarketingDatePackage": "20270731",
"SamplePackage": "N",
"IndicationAndUsage": "GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823)."
},
{
"NDCCode": "0049-0178-08",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0178-08) ",
"NDC11Code": "00049-0178-08",
"ProductNDC": "0049-0178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucotrol",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130509",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020329",
"LabelerName": "Roerig",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130509",
"SamplePackage": "N",
"IndicationAndUsage": "GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823)."
},
{
"NDCCode": "0049-2242-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0049-2242-01) / 30 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00049-2242-01",
"ProductNDC": "0049-2242",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eraxis",
"NonProprietaryName": "Anidulafungin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021632",
"LabelerName": "Roerig",
"SubstanceName": "ANIDULAFUNGIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-02-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240220",
"SamplePackage": "N",
"IndicationAndUsage": "ERAXIS is an echinocandin antifungal indicated for the treatment of the following infections: : 1 Candidemia and other forms of Candida infections (intra-abdominal abscess and peritonitis) in adults and pediatric patients (1 month of age and older) (1.1), 2 Esophageal candidiasis in adults (1.2).",
"Description": "ERAXIS for Injection is a sterile, lyophilized product for intravenous (IV) infusion that contains anidulafungin. ERAXIS (anidulafungin) is a semi-synthetic lipopeptide synthesized from a fermentation product of Aspergillus nidulans. Anidulafungin is an echinocandin, a class of antifungal drugs that inhibits the synthesis of 1,3-β-D-glucan, an essential component of fungal cell walls. ERAXIS (anidulafungin) is 1-[(4R,5R)-4,5-dihydroxy-N2-[[4\"-(pentyloxy)[1,1':4',1\"-terphenyl]-4-yl]carbonyl]-L-ornithine]echinocandin B. Anidulafungin is a white to off-white powder that is practically insoluble in water and slightly soluble in ethanol. In addition to the active ingredient, anidulafungin, ERAXIS for Injection contains the following inactive ingredients. 100 mg/vial – fructose (100 mg), mannitol (500 mg), polysorbate 80 (250 mg), tartaric acid (11.2 mg), and sodium hydroxide and/or hydrochloric acid for pH adjustment. The empirical formula of anidulafungin is C58H73N7O17 and the formula weight is 1140.3. The structural formula is. Prior to administration, ERAXIS for Injection requires reconstitution with sterile Water for Injection and subsequent dilution with either 5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP (normal saline)."
},
{
"NDCCode": "0049-4900-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0049-4900-30) ",
"NDC11Code": "00049-4900-30",
"ProductNDC": "0049-4900",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920211",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019839",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920211",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "0049-4900-41",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0049-4900-41) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00049-4900-41",
"ProductNDC": "0049-4900",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920211",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019839",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920211",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "0049-4910-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0049-4910-30) ",
"NDC11Code": "00049-4910-30",
"ProductNDC": "0049-4910",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920211",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019839",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920211",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "0049-4910-41",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0049-4910-41) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00049-4910-41",
"ProductNDC": "0049-4910",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920211",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019839",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920211",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "0049-4960-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0049-4960-30) ",
"NDC11Code": "00049-4960-30",
"ProductNDC": "0049-4960",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zoloft",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920211",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019839",
"LabelerName": "ROERIG",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920211",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber."
},
{
"NDCCode": "35356-049-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (35356-049-30)",
"NDC11Code": "35356-0049-30",
"ProductNDC": "35356-049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Kadian",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20111221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020616",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-12-22"
},
{
"NDCCode": "35356-049-60",
"PackageDescription": "60 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (35356-049-60)",
"NDC11Code": "35356-0049-60",
"ProductNDC": "35356-049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Kadian",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20111221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020616",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-12-22"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0049-0530-22</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0049-0530-22) / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>00049-0530-22</NDC11Code>
<ProductNDC>0049-0530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pfizerpen</ProprietaryName>
<NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060657</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
<StrengthNumber>20000000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
</NDC>
<NDC>
<NDCCode>0049-0530-28</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0049-0530-28) / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>00049-0530-28</NDC11Code>
<ProductNDC>0049-0530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pfizerpen</ProprietaryName>
<NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060657</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
<StrengthNumber>20000000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
</NDC>
<NDC>
<NDCCode>0049-0530-44</NDCCode>
<PackageDescription>1 POWDER, FOR SOLUTION in 1 VIAL (0049-0530-44)</PackageDescription>
<NDC11Code>00049-0530-44</NDC11Code>
<ProductNDC>0049-0530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pfizerpen</ProprietaryName>
<NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060657</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
<StrengthNumber>20000000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0049-0520-22</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0049-0520-22) / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>00049-0520-22</NDC11Code>
<ProductNDC>0049-0520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pfizerpen</ProprietaryName>
<NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060657</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
<StrengthNumber>5000000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
</NDC>
<NDC>
<NDCCode>37000-049-22</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (37000-049-22) / 62 g in 1 TUBE</PackageDescription>
<NDC11Code>37000-0049-22</NDC11Code>
<ProductNDC>37000-049</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kids Crest Cavity Protection</ProprietaryName>
<ProprietaryNameSuffix>Sparkle Fun</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>PASTE, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20020905</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M021</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps protect against cavities.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58933-049-22</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (58933-049-22) / 62 g in 1 TUBE</PackageDescription>
<NDC11Code>58933-0049-22</NDC11Code>
<ProductNDC>58933-049</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kids Crest Cavity Protection</ProprietaryName>
<ProprietaryNameSuffix>Sparkle Fun</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>PASTE, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20020905</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M021</ApplicationNumber>
<LabelerName>Procter & Gamble Manufactura, S. de R.L. de C.V.</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps protect against cavities.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0310-0530-10</NDCCode>
<PackageDescription>12500 TABLET, EXTENDED RELEASE in 1 BAG (0310-0530-10) </PackageDescription>
<NDC11Code>00310-0530-10</NDC11Code>
<ProductNDC>0310-0530</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Quetiapine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<StartMarketingDate>20220422</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-23</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-APR-22</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>43742-0530-1</NDCCode>
<PackageDescription>960 mL in 1 BOTTLE (43742-0530-1) </PackageDescription>
<NDC11Code>43742-0530-01</NDC11Code>
<ProductNDC>43742-0530</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Toxoplasma Gondii</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20141110</StartMarketingDate>
<EndMarketingDate>20240914</EndMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc</LabelerName>
<SubstanceName>TOXOPLASMA GONDII</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>22-NOV-16</StartMarketingDatePackage>
<EndMarketingDatePackage>14-SEP-24</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>44114-530-80</NDCCode>
<PackageDescription>80 g in 1 TUBE (44114-530-80) </PackageDescription>
<NDC11Code>44114-0530-80</NDC11Code>
<ProductNDC>44114-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Laspa Mineral Sunscreen</ProprietaryName>
<NonProprietaryName>Spf 30 Moisturizing Mineral Sunscreen</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20211129</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Vegewax Candleworx Ltd</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63190-0530-3</NDCCode>
<PackageDescription>30 kg in 1 DRUM (63190-0530-3) </PackageDescription>
<NDC11Code>63190-0530-03</NDC11Code>
<ProductNDC>63190-0530</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dalfampridine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100122</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Industriale Chimica s.r.l.</LabelerName>
<SubstanceName>DALFAMPRIDINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2022-11-29</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-JAN-10</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63190-0530-5</NDCCode>
<PackageDescription>1 kg in 1 DRUM (63190-0530-5) </PackageDescription>
<NDC11Code>63190-0530-05</NDC11Code>
<ProductNDC>63190-0530</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dalfampridine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100122</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Industriale Chimica s.r.l.</LabelerName>
<SubstanceName>DALFAMPRIDINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2022-11-29</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-JAN-10</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>64406-530-01</NDCCode>
<PackageDescription>1 kg in 1 BOTTLE (64406-530-01) </PackageDescription>
<NDC11Code>64406-0530-01</NDC11Code>
<ProductNDC>64406-530</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Efanesoctocog Alfa</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20230222</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Biogen Inc.</LabelerName>
<SubstanceName>EFANESOCTOCOG ALFA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-05-09</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-FEB-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71205-530-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71205-530-30) </PackageDescription>
<NDC11Code>71205-0530-30</NDC11Code>
<ProductNDC>71205-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078420</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71205-530-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71205-530-60) </PackageDescription>
<NDC11Code>71205-0530-60</NDC11Code>
<ProductNDC>71205-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078420</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71205-530-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-530-90) </PackageDescription>
<NDC11Code>71205-0530-90</NDC11Code>
<ProductNDC>71205-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078420</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0049-0013-83</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0049-0013-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0013-81) </PackageDescription>
<NDC11Code>00049-0013-83</NDC11Code>
<ProductNDC>0049-0013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Unasyn</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19911122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050608</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19911122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0049-0014-83</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0049-0014-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0014-81) </PackageDescription>
<NDC11Code>00049-0014-83</NDC11Code>
<ProductNDC>0049-0014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Unasyn</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19911122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050608</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19911122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0049-0024-28</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (0049-0024-28) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>00049-0024-28</NDC11Code>
<ProductNDC>0049-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Unasyn</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19911122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050608</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19911122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. UNASYN pharmacy bulk package is a vial containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of UNASYN for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DIRECTIONS FOR USE–Directions for Proper Use of Pharmacy Bulk Package section). Each 15 g vial contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.627 g ampicillin sodium and 5.470 g sulbactam sodium). Each 1.5 g of UNASYN contains approximately 115 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0049-0050-01</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0049-0050-01) / 60 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00049-0050-01</NDC11Code>
<ProductNDC>0049-0050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170106</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020990</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170106</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>0049-0174-02</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-02) </PackageDescription>
<NDC11Code>00049-0174-02</NDC11Code>
<ProductNDC>0049-0174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucotrol</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130509</StartMarketingDate>
<EndMarketingDate>20270731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020329</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130509</StartMarketingDatePackage>
<EndMarketingDatePackage>20270731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823).</Description>
</NDC>
<NDC>
<NDCCode>0049-0174-03</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-03) </PackageDescription>
<NDC11Code>00049-0174-03</NDC11Code>
<ProductNDC>0049-0174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucotrol</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130509</StartMarketingDate>
<EndMarketingDate>20270731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020329</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130509</StartMarketingDatePackage>
<EndMarketingDatePackage>20270731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823).</Description>
</NDC>
<NDC>
<NDCCode>0049-0178-08</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0178-08) </PackageDescription>
<NDC11Code>00049-0178-08</NDC11Code>
<ProductNDC>0049-0178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucotrol</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130509</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020329</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823).</Description>
</NDC>
<NDC>
<NDCCode>0049-2242-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0049-2242-01) / 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00049-2242-01</NDC11Code>
<ProductNDC>0049-2242</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eraxis</ProprietaryName>
<NonProprietaryName>Anidulafungin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021632</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>ANIDULAFUNGIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ERAXIS is an echinocandin antifungal indicated for the treatment of the following infections: : 1 Candidemia and other forms of Candida infections (intra-abdominal abscess and peritonitis) in adults and pediatric patients (1 month of age and older) (1.1), 2 Esophageal candidiasis in adults (1.2).</IndicationAndUsage>
<Description>ERAXIS for Injection is a sterile, lyophilized product for intravenous (IV) infusion that contains anidulafungin. ERAXIS (anidulafungin) is a semi-synthetic lipopeptide synthesized from a fermentation product of Aspergillus nidulans. Anidulafungin is an echinocandin, a class of antifungal drugs that inhibits the synthesis of 1,3-β-D-glucan, an essential component of fungal cell walls. ERAXIS (anidulafungin) is 1-[(4R,5R)-4,5-dihydroxy-N2-[[4"-(pentyloxy)[1,1':4',1"-terphenyl]-4-yl]carbonyl]-L-ornithine]echinocandin B. Anidulafungin is a white to off-white powder that is practically insoluble in water and slightly soluble in ethanol. In addition to the active ingredient, anidulafungin, ERAXIS for Injection contains the following inactive ingredients. 100 mg/vial – fructose (100 mg), mannitol (500 mg), polysorbate 80 (250 mg), tartaric acid (11.2 mg), and sodium hydroxide and/or hydrochloric acid for pH adjustment. The empirical formula of anidulafungin is C58H73N7O17 and the formula weight is 1140.3. The structural formula is. Prior to administration, ERAXIS for Injection requires reconstitution with sterile Water for Injection and subsequent dilution with either 5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP (normal saline).</Description>
</NDC>
<NDC>
<NDCCode>0049-4900-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0049-4900-30) </PackageDescription>
<NDC11Code>00049-4900-30</NDC11Code>
<ProductNDC>0049-4900</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920211</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019839</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920211</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>0049-4900-41</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0049-4900-41) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00049-4900-41</NDC11Code>
<ProductNDC>0049-4900</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920211</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019839</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920211</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>0049-4910-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0049-4910-30) </PackageDescription>
<NDC11Code>00049-4910-30</NDC11Code>
<ProductNDC>0049-4910</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920211</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019839</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920211</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>0049-4910-41</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0049-4910-41) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00049-4910-41</NDC11Code>
<ProductNDC>0049-4910</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920211</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019839</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920211</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>0049-4960-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0049-4960-30) </PackageDescription>
<NDC11Code>00049-4960-30</NDC11Code>
<ProductNDC>0049-4960</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zoloft</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920211</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019839</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920211</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLOFT is indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>ZOLOFT contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S‑cis)‑4‑(3,4‑dichlorophenyl)‑1,2,3,4‑tetrahydro-N‑methyl‑1‑naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. ZOLOFT tablets for oral administration contain 28.0 mg, 56.0 mg and 111.9 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Red #40 aluminum lake (in 25 mg tablet), FD & C Blue #2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, synthetic yellow iron oxide (in 100 mg tablet), and titanium dioxide. ZOLOFT oral solution is available in a multidose 60 mL bottle. Each mL of solution contains 22.4 mg sertraline hydrochloride equivalent to 20 mg of sertraline. The solution contains the following inactive ingredients: glycerin, alcohol (12%), menthol, butylated hydroxytoluene (BHT). The oral solution must be diluted prior to administration [See Dosage and Administration (2.7)]. The dispenser contains dry natural rubber.</Description>
</NDC>
<NDC>
<NDCCode>35356-049-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (35356-049-30)</PackageDescription>
<NDC11Code>35356-0049-30</NDC11Code>
<ProductNDC>35356-049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Kadian</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020616</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>35356-049-60</NDCCode>
<PackageDescription>60 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (35356-049-60)</PackageDescription>
<NDC11Code>35356-0049-60</NDC11Code>
<ProductNDC>35356-049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Kadian</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020616</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-22</LastUpdate>
</NDC>
</NDCList>