{
"NDC": [
{
"NDCCode": "0054-0264-24",
"PackageDescription": "10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER",
"NDC11Code": "00054-0264-24",
"ProductNDC": "0054-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0054-0264-25",
"PackageDescription": "100 TABLET in 1 BOTTLE (0054-0264-25) ",
"NDC11Code": "00054-0264-25",
"ProductNDC": "0054-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0054-0235-24",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0054-0235-24) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-0235-24",
"ProductNDC": "0054-0235",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022207",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080317",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Tablets are indicated for the management of: 1 adult and pediatric patients weighing at least 50 kg and above with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 adults with chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. .",
"Description": "Morphine Sulfate Tablets are an opioid agonist, available for oral administration: : 1 15 mg tablet: Each tablet contains 15 mg of morphine sulfate, USP (equivalent to 11.25 mg morphine)., 2 30 mg tablet: Each tablet contains 30 mg of morphine sulfate, USP (equivalent to 22.5 mg morphine)."
},
{
"NDCCode": "0054-0236-24",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0054-0236-24) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-0236-24",
"ProductNDC": "0054-0236",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022207",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080317",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Tablets are indicated for the management of: 1 adult and pediatric patients weighing at least 50 kg and above with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 adults with chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. .",
"Description": "Morphine Sulfate Tablets are an opioid agonist, available for oral administration: : 1 15 mg tablet: Each tablet contains 15 mg of morphine sulfate, USP (equivalent to 11.25 mg morphine)., 2 30 mg tablet: Each tablet contains 30 mg of morphine sulfate, USP (equivalent to 22.5 mg morphine)."
},
{
"NDCCode": "0054-0243-24",
"PackageDescription": "10 BLISTER PACK in 1 BOX (0054-0243-24) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-0243-24",
"ProductNDC": "0054-0243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Codeine Sulfate",
"NonProprietaryName": "Codeine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090716",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CODEINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090716",
"SamplePackage": "N",
"IndicationAndUsage": "Codeine Sulfate Tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Codeine Sulfate Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. .",
"Description": "Codeine Sulfate Tablets, USP contain codeine, an opioid agonist, available for oral administration containing either 15 mg, 30 mg, or 60 mg of codeine sulfate, USP. The chemical name is morphinan-6-ol,7,8-didehydro-4,5-epoxy-3-methoxy-17-methyl-(5α,6α)-, sulfate (2:1) (salt), trihydrate. Its molecular formula is (C18H21NO3)2 H2SO4 3H2O and its molecular weight is 750.85 g/mol. Its structure is as follows. Codeine sulfate trihydrate is a fine, white, crystalline powder which is soluble in water and insoluble in chloroform and ether. The inactive ingredients in Codeine Sulfate Tablets, USP include: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid."
},
{
"NDCCode": "0054-0244-24",
"PackageDescription": "10 BLISTER PACK in 1 BOX (0054-0244-24) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-0244-24",
"ProductNDC": "0054-0244",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Codeine Sulfate",
"NonProprietaryName": "Codeine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090716",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CODEINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090716",
"SamplePackage": "N",
"IndicationAndUsage": "Codeine Sulfate Tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Codeine Sulfate Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. .",
"Description": "Codeine Sulfate Tablets, USP contain codeine, an opioid agonist, available for oral administration containing either 15 mg, 30 mg, or 60 mg of codeine sulfate, USP. The chemical name is morphinan-6-ol,7,8-didehydro-4,5-epoxy-3-methoxy-17-methyl-(5α,6α)-, sulfate (2:1) (salt), trihydrate. Its molecular formula is (C18H21NO3)2 H2SO4 3H2O and its molecular weight is 750.85 g/mol. Its structure is as follows. Codeine sulfate trihydrate is a fine, white, crystalline powder which is soluble in water and insoluble in chloroform and ether. The inactive ingredients in Codeine Sulfate Tablets, USP include: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid."
},
{
"NDCCode": "0054-0551-24",
"PackageDescription": "4 BLISTER PACK in 1 BOX (0054-0551-24) > 25 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-0551-24",
"ProductNDC": "0054-0551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19910201",
"EndMarketingDate": "20210228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087003",
"LabelerName": "West-Ward Pharmaceuticals Corp.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2021-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19910201",
"EndMarketingDatePackage": "20210228",
"SamplePackage": "N"
},
{
"NDCCode": "0054-4497-10",
"PackageDescription": "24 TABLET in 1 BOTTLE (0054-4497-10) ",
"NDC11Code": "00054-4497-10",
"ProductNDC": "0054-4497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin Calcium",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072734",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Folate Analog [EPC], Folic Acid [CS]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930322",
"SamplePackage": "N",
"IndicationAndUsage": "Leucovorin is a folate analog indicated: 1 To reduce the toxicity of:, 2 oMethotrexate in adult patients with impaired methotrexate elimination, and, 3 oFolic acid antagonists or dihydrofolate reductase (DHFR) inhibitors following an overdose in adult patients. (1.1) , 4 For the treatment of cerebral folate transport deficiency in adult and pediatric patients who have a confirmed variant in the folate receptor 1 gene (FOLR1-CFTD). (1.2), 5 Limitations of Use, 6 Leucovorin is not recommended for use in patients with a deficiency of methenyltetrahydrofolate synthetase (MTHFS) because MTHFS is a primary enzyme in the metabolism of leucovorin to 5-methenyltetrahydrofolate. (1.2).",
"Description": "Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W. 511.51. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg, 10 mg, 15 mg or 25 mg leucovorin tablets are either equivalent to 5.4 mg, 10.8 mg, 16.21 mg or 27.01 mg of anhydrous leucovorin calcium, USP, respectively. In addition, each tablet contains the following inactive ingredients colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 (15 mg and 25 mg), magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch."
},
{
"NDCCode": "0054-4498-10",
"PackageDescription": "24 TABLET in 1 BOTTLE (0054-4498-10) ",
"NDC11Code": "00054-4498-10",
"ProductNDC": "0054-4498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin Calcium",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072735",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Folate Analog [EPC], Folic Acid [CS]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930322",
"SamplePackage": "N",
"IndicationAndUsage": "Leucovorin is a folate analog indicated: 1 To reduce the toxicity of:, 2 oMethotrexate in adult patients with impaired methotrexate elimination, and, 3 oFolic acid antagonists or dihydrofolate reductase (DHFR) inhibitors following an overdose in adult patients. (1.1) , 4 For the treatment of cerebral folate transport deficiency in adult and pediatric patients who have a confirmed variant in the folate receptor 1 gene (FOLR1-CFTD). (1.2), 5 Limitations of Use, 6 Leucovorin is not recommended for use in patients with a deficiency of methenyltetrahydrofolate synthetase (MTHFS) because MTHFS is a primary enzyme in the metabolism of leucovorin to 5-methenyltetrahydrofolate. (1.2).",
"Description": "Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W. 511.51. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg, 10 mg, 15 mg or 25 mg leucovorin tablets are either equivalent to 5.4 mg, 10.8 mg, 16.21 mg or 27.01 mg of anhydrous leucovorin calcium, USP, respectively. In addition, each tablet contains the following inactive ingredients colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 (15 mg and 25 mg), magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch."
},
{
"NDCCode": "0054-8553-24",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0054-8553-24) > 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-8553-24",
"ProductNDC": "0054-8553",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20011011",
"EndMarketingDate": "20230831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006134",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2023-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20011011",
"EndMarketingDatePackage": "20230831",
"SamplePackage": "N"
},
{
"NDCCode": "0054-8554-24",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0054-8554-24) > 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-8554-24",
"ProductNDC": "0054-8554",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20011011",
"EndMarketingDate": "20230831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006134",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2023-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20011011",
"EndMarketingDatePackage": "20230831",
"SamplePackage": "N"
},
{
"NDCCode": "0054-8650-24",
"PackageDescription": "4 BLISTER PACK in 1 BOX (0054-8650-24) > 25 TABLET in 1 BLISTER PACK",
"NDC11Code": "00054-8650-24",
"ProductNDC": "0054-8650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Roxicet",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19870311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087003",
"LabelerName": "Roxane Laboratories, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0338-0054-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0054-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0054-03",
"ProductNDC": "0338-0054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19831101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019022",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19831101",
"SamplePackage": "N",
"IndicationAndUsage": "3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.",
"Description": "3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "83324-054-24",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (83324-054-24) / 24 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "83324-0054-24",
"ProductNDC": "83324-054",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sinus Congestion",
"NonProprietaryName": "Pseudoephedrine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20251107",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Chain Drug Marketing Association, Inc.",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251107",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure."
},
{
"NDCCode": "0264-1009-90",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-1009-90) / 100 mL in 1 CONTAINER",
"NDC11Code": "00264-1009-90",
"ProductNDC": "0264-1009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209705",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1509-90",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-1509-90) / 100 mL in 1 CONTAINER",
"NDC11Code": "00264-1509-90",
"ProductNDC": "0264-1509",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209705",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1944-20",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-1944-20) > 250 mL in 1 CONTAINER",
"NDC11Code": "00264-1944-20",
"ProductNDC": "0264-1944",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20220502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085870",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "14.9",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220502",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride for Injection Concentrate USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible. This is a concentrated solution which is intended for use in a pharmacy admixture service and is restricted to the preparation of admixtures for intravenous infusion."
},
{
"NDCCode": "0264-3103-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3103-11) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3103-11",
"ProductNDC": "0264-3103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin Sodium",
"NonProprietaryName": "Cefazolin Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000727",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050779",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000727",
"SamplePackage": "N",
"IndicationAndUsage": "Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).",
"Description": "Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3105-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3105-11) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3105-11",
"ProductNDC": "0264-3105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin Sodium",
"NonProprietaryName": "Cefazolin Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120113",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050779",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120113",
"SamplePackage": "N",
"IndicationAndUsage": "Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).",
"Description": "Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3107-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3107-11) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3107-11",
"ProductNDC": "0264-3107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin Sodium",
"NonProprietaryName": "Cefazolin Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250310",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050779",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "3",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250310",
"SamplePackage": "N",
"IndicationAndUsage": "Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).",
"Description": "Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3112-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3112-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3112-11",
"ProductNDC": "0264-3112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime And Dextrose",
"NonProprietaryName": "Cefuroxime And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050780",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2020-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010221",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection USP and Dextrose Injection USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp. , 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp. , 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase producing strains).",
"Description": "Cefuroxime for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single use, packaged combination of Cefuroxime Sodium USP (crystalline) and Dextrose Injection USP (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with sterile crystalline Cefuroxime for Injection USP, a semi-synthetic, broad-spectrum, cephalosporin antibacterial for parenteral administration. It is the sodium salt of (6R,7R)-7-[2-(2-furyl)glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, 72-(Z)-(O-methyloxime), carbamate (ester). Cefuroxime Sodium USP has the following structural formula. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. The diluent chamber contains Dextrose Injection USP. The concentration of Hydrous Dextrose USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. Dextrose hydrous USP has been added to the diluent to adjust osmolality (approximately 2.05 g and 1.45 g to 750 mg and 1.5 g dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality of the reconstituted solution for Cefuroxime for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. Not made with natural rubber latex, PVC or Di (2-ethylhexyl) phthalate (DEHP). The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3114-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3114-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3114-11",
"ProductNDC": "0264-3114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime And Dextrose",
"NonProprietaryName": "Cefuroxime And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050780",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "1.5",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2020-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010221",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection USP and Dextrose Injection USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp. , 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp. , 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase producing strains).",
"Description": "Cefuroxime for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single use, packaged combination of Cefuroxime Sodium USP (crystalline) and Dextrose Injection USP (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with sterile crystalline Cefuroxime for Injection USP, a semi-synthetic, broad-spectrum, cephalosporin antibacterial for parenteral administration. It is the sodium salt of (6R,7R)-7-[2-(2-furyl)glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, 72-(Z)-(O-methyloxime), carbamate (ester). Cefuroxime Sodium USP has the following structural formula. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. The diluent chamber contains Dextrose Injection USP. The concentration of Hydrous Dextrose USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. Dextrose hydrous USP has been added to the diluent to adjust osmolality (approximately 2.05 g and 1.45 g to 750 mg and 1.5 g dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality of the reconstituted solution for Cefuroxime for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. Not made with natural rubber latex, PVC or Di (2-ethylhexyl) phthalate (DEHP). The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3123-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3123-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3123-11",
"ProductNDC": "0264-3123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefoxitin And Dextrose",
"NonProprietaryName": "Cefoxitin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060310",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA065214",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFOXITIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060310",
"SamplePackage": "N",
"IndicationAndUsage": "Cefoxitin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible isolates of the designated bacteria (1): 1 Lower respiratory tract infections (1.1);, 2 Urinary tract infections (1.2);, 3 Intra-abdominal infections (1.3);, 4 Gynecological infections (1.4);, 5 Septicemia (1.5);, 6 Bone and joint infections (1.6);, 7 Skin and skin structure infections (1.7);, 8 Prophylaxis (1.8).",
"Description": "Cefoxitin for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose packaged combination of cefoxitin sodium USP and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with cefoxitin sodium USP, a semi-synthetic, broad-spectrum cephalosporin antibacterial sealed under nitrogen for intravenous administration. Cefoxitin sodium USP is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the molecular weight is 449.44. The structural formula is. Cefoxitin sodium contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin activity. The diluent chamber contains Dextrose Injection. The concentration of Dextrose Hydrous USP in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Hydrous USP has been added to adjust the osmolality to approximately 290 mOsmol/kg (approximately 2 g (4% w/v) and 1.1 g (2.2% w/v) to the 1 g and 2 g doses, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic and antimicrobial agents. Dextrose Hydrous USP has the following structural (molecular) formula. The molecular weight of Dextrose Hydrous USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted according to instructions in the product labeling, the approximate osmolality of the reconstituted solution of Cefoxitin for Injection and Dextrose Injection is approximately 290 mOsmol/kg. After reconstitution, each 50 mL contains 1 gram of cefoxitin (equivalent to 1.05 gram of cefoxitin sodium) or 2 grams of cefoxitin (equivalent to 2.10 grams of cefoxitin sodium), with a pH of approximately 6.5. Solutions of Cefoxitin for Injection and Dextrose Injection range from colorless to light amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3125-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3125-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3125-11",
"ProductNDC": "0264-3125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefoxitin And Dextrose",
"NonProprietaryName": "Cefoxitin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060310",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA065214",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFOXITIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060310",
"SamplePackage": "N",
"IndicationAndUsage": "Cefoxitin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible isolates of the designated bacteria (1): 1 Lower respiratory tract infections (1.1);, 2 Urinary tract infections (1.2);, 3 Intra-abdominal infections (1.3);, 4 Gynecological infections (1.4);, 5 Septicemia (1.5);, 6 Bone and joint infections (1.6);, 7 Skin and skin structure infections (1.7);, 8 Prophylaxis (1.8).",
"Description": "Cefoxitin for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose packaged combination of cefoxitin sodium USP and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with cefoxitin sodium USP, a semi-synthetic, broad-spectrum cephalosporin antibacterial sealed under nitrogen for intravenous administration. Cefoxitin sodium USP is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the molecular weight is 449.44. The structural formula is. Cefoxitin sodium contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin activity. The diluent chamber contains Dextrose Injection. The concentration of Dextrose Hydrous USP in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Hydrous USP has been added to adjust the osmolality to approximately 290 mOsmol/kg (approximately 2 g (4% w/v) and 1.1 g (2.2% w/v) to the 1 g and 2 g doses, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic and antimicrobial agents. Dextrose Hydrous USP has the following structural (molecular) formula. The molecular weight of Dextrose Hydrous USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted according to instructions in the product labeling, the approximate osmolality of the reconstituted solution of Cefoxitin for Injection and Dextrose Injection is approximately 290 mOsmol/kg. After reconstitution, each 50 mL contains 1 gram of cefoxitin (equivalent to 1.05 gram of cefoxitin sodium) or 2 grams of cefoxitin (equivalent to 2.10 grams of cefoxitin sodium), with a pH of approximately 6.5. Solutions of Cefoxitin for Injection and Dextrose Injection range from colorless to light amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3143-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3143-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3143-11",
"ProductNDC": "0264-3143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftazidime And Dextrose",
"NonProprietaryName": "Ceftazidime",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050823",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFTAZIDIME",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20110613",
"SamplePackage": "N"
},
{
"NDCCode": "0264-3145-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3145-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3145-11",
"ProductNDC": "0264-3145",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftazidime And Dextrose",
"NonProprietaryName": "Ceftazidime",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050823",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFTAZIDIME",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20110613",
"SamplePackage": "N"
},
{
"NDCCode": "0264-3153-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3153-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3153-11",
"ProductNDC": "0264-3153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone And Dextrose",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050420",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050796",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050420",
"SamplePackage": "N",
"IndicationAndUsage": "Ceftriaxone for Injection and Dextrose Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.",
"Description": "Ceftriaxone for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose, packaged combination of Ceftriaxone Sodium and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with ceftriaxone sodium, a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is supplied as a dry powder form equivalent to either 1 g or 2 g of ceftriaxone. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity. The diluent chamber contains Dextrose Injection. The concentration of Hydrous Dextrose in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose USP has been added to adjust osmolality (approximately 1.87 g and 1.11 g to 1 g and 2 g dosages, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality for the reconstituted solution for Ceftriaxone for Injection and Dextrose Injection is 290 mOsmol/kg. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3155-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3155-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3155-11",
"ProductNDC": "0264-3155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone And Dextrose",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050420",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050796",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050420",
"SamplePackage": "N",
"IndicationAndUsage": "Ceftriaxone for Injection and Dextrose Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.",
"Description": "Ceftriaxone for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose, packaged combination of Ceftriaxone Sodium and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with ceftriaxone sodium, a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is supplied as a dry powder form equivalent to either 1 g or 2 g of ceftriaxone. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity. The diluent chamber contains Dextrose Injection. The concentration of Hydrous Dextrose in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose USP has been added to adjust osmolality (approximately 1.87 g and 1.11 g to 1 g and 2 g dosages, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality for the reconstituted solution for Ceftriaxone for Injection and Dextrose Injection is 290 mOsmol/kg. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3173-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3173-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3173-11",
"ProductNDC": "0264-3173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotetan And Dextrose",
"NonProprietaryName": "Cefotetan And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA065430",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFOTETAN DISODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100820",
"SamplePackage": "N"
},
{
"NDCCode": "0264-3175-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3175-11) > 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3175-11",
"ProductNDC": "0264-3175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotetan And Dextrose",
"NonProprietaryName": "Cefotetan And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA065430",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFOTETAN DISODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100820",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0054-0264-24</NDCCode>
<PackageDescription>10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER</PackageDescription>
<NDC11Code>00054-0264-24</NDC11Code>
<ProductNDC>0054-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0054-0264-25</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0054-0264-25) </PackageDescription>
<NDC11Code>00054-0264-25</NDC11Code>
<ProductNDC>0054-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0054-0235-24</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0054-0235-24) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-0235-24</NDC11Code>
<ProductNDC>0054-0235</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022207</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Tablets are indicated for the management of: 1 adult and pediatric patients weighing at least 50 kg and above with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 adults with chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. .</IndicationAndUsage>
<Description>Morphine Sulfate Tablets are an opioid agonist, available for oral administration: : 1 15 mg tablet: Each tablet contains 15 mg of morphine sulfate, USP (equivalent to 11.25 mg morphine)., 2 30 mg tablet: Each tablet contains 30 mg of morphine sulfate, USP (equivalent to 22.5 mg morphine).</Description>
</NDC>
<NDC>
<NDCCode>0054-0236-24</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0054-0236-24) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-0236-24</NDC11Code>
<ProductNDC>0054-0236</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022207</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Tablets are indicated for the management of: 1 adult and pediatric patients weighing at least 50 kg and above with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 adults with chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. .</IndicationAndUsage>
<Description>Morphine Sulfate Tablets are an opioid agonist, available for oral administration: : 1 15 mg tablet: Each tablet contains 15 mg of morphine sulfate, USP (equivalent to 11.25 mg morphine)., 2 30 mg tablet: Each tablet contains 30 mg of morphine sulfate, USP (equivalent to 22.5 mg morphine).</Description>
</NDC>
<NDC>
<NDCCode>0054-0243-24</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX (0054-0243-24) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-0243-24</NDC11Code>
<ProductNDC>0054-0243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Codeine Sulfate</ProprietaryName>
<NonProprietaryName>Codeine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090716</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CODEINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Codeine Sulfate Tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Codeine Sulfate Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. .</IndicationAndUsage>
<Description>Codeine Sulfate Tablets, USP contain codeine, an opioid agonist, available for oral administration containing either 15 mg, 30 mg, or 60 mg of codeine sulfate, USP. The chemical name is morphinan-6-ol,7,8-didehydro-4,5-epoxy-3-methoxy-17-methyl-(5α,6α)-, sulfate (2:1) (salt), trihydrate. Its molecular formula is (C18H21NO3)2 H2SO4 3H2O and its molecular weight is 750.85 g/mol. Its structure is as follows. Codeine sulfate trihydrate is a fine, white, crystalline powder which is soluble in water and insoluble in chloroform and ether. The inactive ingredients in Codeine Sulfate Tablets, USP include: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>0054-0244-24</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX (0054-0244-24) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-0244-24</NDC11Code>
<ProductNDC>0054-0244</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Codeine Sulfate</ProprietaryName>
<NonProprietaryName>Codeine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090716</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CODEINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Codeine Sulfate Tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Codeine Sulfate Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. .</IndicationAndUsage>
<Description>Codeine Sulfate Tablets, USP contain codeine, an opioid agonist, available for oral administration containing either 15 mg, 30 mg, or 60 mg of codeine sulfate, USP. The chemical name is morphinan-6-ol,7,8-didehydro-4,5-epoxy-3-methoxy-17-methyl-(5α,6α)-, sulfate (2:1) (salt), trihydrate. Its molecular formula is (C18H21NO3)2 H2SO4 3H2O and its molecular weight is 750.85 g/mol. Its structure is as follows. Codeine sulfate trihydrate is a fine, white, crystalline powder which is soluble in water and insoluble in chloroform and ether. The inactive ingredients in Codeine Sulfate Tablets, USP include: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>0054-0551-24</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 BOX (0054-0551-24) > 25 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-0551-24</NDC11Code>
<ProductNDC>0054-0551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19910201</StartMarketingDate>
<EndMarketingDate>20210228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087003</ApplicationNumber>
<LabelerName>West-Ward Pharmaceuticals Corp.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19910201</StartMarketingDatePackage>
<EndMarketingDatePackage>20210228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0054-4497-10</NDCCode>
<PackageDescription>24 TABLET in 1 BOTTLE (0054-4497-10) </PackageDescription>
<NDC11Code>00054-4497-10</NDC11Code>
<ProductNDC>0054-4497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin Calcium</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072734</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leucovorin is a folate analog indicated: 1 To reduce the toxicity of:, 2 oMethotrexate in adult patients with impaired methotrexate elimination, and, 3 oFolic acid antagonists or dihydrofolate reductase (DHFR) inhibitors following an overdose in adult patients. (1.1) , 4 For the treatment of cerebral folate transport deficiency in adult and pediatric patients who have a confirmed variant in the folate receptor 1 gene (FOLR1-CFTD). (1.2), 5 Limitations of Use, 6 Leucovorin is not recommended for use in patients with a deficiency of methenyltetrahydrofolate synthetase (MTHFS) because MTHFS is a primary enzyme in the metabolism of leucovorin to 5-methenyltetrahydrofolate. (1.2).</IndicationAndUsage>
<Description>Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W. 511.51. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg, 10 mg, 15 mg or 25 mg leucovorin tablets are either equivalent to 5.4 mg, 10.8 mg, 16.21 mg or 27.01 mg of anhydrous leucovorin calcium, USP, respectively. In addition, each tablet contains the following inactive ingredients colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 (15 mg and 25 mg), magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>0054-4498-10</NDCCode>
<PackageDescription>24 TABLET in 1 BOTTLE (0054-4498-10) </PackageDescription>
<NDC11Code>00054-4498-10</NDC11Code>
<ProductNDC>0054-4498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin Calcium</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072735</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leucovorin is a folate analog indicated: 1 To reduce the toxicity of:, 2 oMethotrexate in adult patients with impaired methotrexate elimination, and, 3 oFolic acid antagonists or dihydrofolate reductase (DHFR) inhibitors following an overdose in adult patients. (1.1) , 4 For the treatment of cerebral folate transport deficiency in adult and pediatric patients who have a confirmed variant in the folate receptor 1 gene (FOLR1-CFTD). (1.2), 5 Limitations of Use, 6 Leucovorin is not recommended for use in patients with a deficiency of methenyltetrahydrofolate synthetase (MTHFS) because MTHFS is a primary enzyme in the metabolism of leucovorin to 5-methenyltetrahydrofolate. (1.2).</IndicationAndUsage>
<Description>Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W. 511.51. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg, 10 mg, 15 mg or 25 mg leucovorin tablets are either equivalent to 5.4 mg, 10.8 mg, 16.21 mg or 27.01 mg of anhydrous leucovorin calcium, USP, respectively. In addition, each tablet contains the following inactive ingredients colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 (15 mg and 25 mg), magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>0054-8553-24</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0054-8553-24) > 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-8553-24</NDC11Code>
<ProductNDC>0054-8553</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20011011</StartMarketingDate>
<EndMarketingDate>20230831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006134</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20011011</StartMarketingDatePackage>
<EndMarketingDatePackage>20230831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0054-8554-24</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0054-8554-24) > 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-8554-24</NDC11Code>
<ProductNDC>0054-8554</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20011011</StartMarketingDate>
<EndMarketingDate>20230831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006134</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20011011</StartMarketingDatePackage>
<EndMarketingDatePackage>20230831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0054-8650-24</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 BOX (0054-8650-24) > 25 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00054-8650-24</NDC11Code>
<ProductNDC>0054-8650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Roxicet</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19870311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087003</ApplicationNumber>
<LabelerName>Roxane Laboratories, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0054-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0054-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0054-03</NDC11Code>
<ProductNDC>0338-0054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19831101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019022</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19831101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.</IndicationAndUsage>
<Description>3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>83324-054-24</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (83324-054-24) / 24 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>83324-0054-24</NDC11Code>
<ProductNDC>83324-054</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sinus Congestion</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251107</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Chain Drug Marketing Association, Inc.</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0264-1009-90</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-1009-90) / 100 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1009-90</NDC11Code>
<ProductNDC>0264-1009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209705</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).</IndicationAndUsage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1509-90</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-1509-90) / 100 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1509-90</NDC11Code>
<ProductNDC>0264-1509</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209705</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).</IndicationAndUsage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1944-20</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-1944-20) > 250 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1944-20</NDC11Code>
<ProductNDC>0264-1944</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20220502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085870</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>14.9</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride for Injection Concentrate USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible. This is a concentrated solution which is intended for use in a pharmacy admixture service and is restricted to the preparation of admixtures for intravenous infusion.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0264-3103-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3103-11) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3103-11</NDC11Code>
<ProductNDC>0264-3103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin Sodium</ProprietaryName>
<NonProprietaryName>Cefazolin Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000727</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050779</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).</IndicationAndUsage>
<Description>Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3105-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3105-11) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3105-11</NDC11Code>
<ProductNDC>0264-3105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin Sodium</ProprietaryName>
<NonProprietaryName>Cefazolin Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120113</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050779</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).</IndicationAndUsage>
<Description>Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3107-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3107-11) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3107-11</NDC11Code>
<ProductNDC>0264-3107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin Sodium</ProprietaryName>
<NonProprietaryName>Cefazolin Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250310</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050779</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefazolin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for: : 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: (1).</IndicationAndUsage>
<Description>Cefazolin for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single-dose, packaged combination of Cefazolin Sodium USP (lyophilized) and sterile iso-osmotic diluent in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. After reconstitution the approximate osmolality for Cefazolin for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. The drug chamber is filled with sterile lyophilized Cefazolin Sodium USP, a semi-synthetic cephalosporin and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4-thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate. Its empirical formula is C14H13N8NaO4S3 and its molecular weight is 476.48. Cefazolin Sodium USP has the following structural formula. The sodium content is 48 mg/g of cefazolin sodium. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. Cefazolin Sodium USP is supplied as a lyophilized form equivalent to either 1 gram, 2 grams or 3 grams of cefazolin. The 1 gram / container Cefazolin Sodium USP contains 1 gram of cefazolin (equivalent to 1.048 grams of cefazolin sodium). The 2 grams / container Cefazolin Sodium USP contains 2 grams of cefazolin (equivalent to 2.096 grams of cefazolin sodium). The 3 grams / container Cefazolin Sodium USP contains 3 grams of cefazolin (equivalent to 3.145 grams of cefazolin sodium). Dextrose Hydrous USP has been added to the diluent (Water for Injection USP) to adjust osmolality (approximately 2 grams [4% w/v], 1.5 grams [3% w/v] and 1 gram [2% w/v] for the 1 gram, 2 gram or 3 gram dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. The pH of reconstituted solutions of Cefazolin for Injection and Dextrose Injection is 3.5 to 7.0. Reconstituted solutions of Cefazolin for Injection and Dextrose Injection range in color from pale yellow to amber. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3112-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3112-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3112-11</NDC11Code>
<ProductNDC>0264-3112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime And Dextrose</ProprietaryName>
<NonProprietaryName>Cefuroxime And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050780</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection USP and Dextrose Injection USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp. , 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp. , 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase producing strains).</IndicationAndUsage>
<Description>Cefuroxime for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single use, packaged combination of Cefuroxime Sodium USP (crystalline) and Dextrose Injection USP (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with sterile crystalline Cefuroxime for Injection USP, a semi-synthetic, broad-spectrum, cephalosporin antibacterial for parenteral administration. It is the sodium salt of (6R,7R)-7-[2-(2-furyl)glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, 72-(Z)-(O-methyloxime), carbamate (ester). Cefuroxime Sodium USP has the following structural formula. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. The diluent chamber contains Dextrose Injection USP. The concentration of Hydrous Dextrose USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. Dextrose hydrous USP has been added to the diluent to adjust osmolality (approximately 2.05 g and 1.45 g to 750 mg and 1.5 g dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality of the reconstituted solution for Cefuroxime for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. Not made with natural rubber latex, PVC or Di (2-ethylhexyl) phthalate (DEHP). The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3114-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3114-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3114-11</NDC11Code>
<ProductNDC>0264-3114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime And Dextrose</ProprietaryName>
<NonProprietaryName>Cefuroxime And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050780</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection USP and Dextrose Injection USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp. , 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp. , 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase producing strains).</IndicationAndUsage>
<Description>Cefuroxime for Injection USP and Dextrose Injection USP is a sterile, nonpyrogenic, single use, packaged combination of Cefuroxime Sodium USP (crystalline) and Dextrose Injection USP (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with sterile crystalline Cefuroxime for Injection USP, a semi-synthetic, broad-spectrum, cephalosporin antibacterial for parenteral administration. It is the sodium salt of (6R,7R)-7-[2-(2-furyl)glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, 72-(Z)-(O-methyloxime), carbamate (ester). Cefuroxime Sodium USP has the following structural formula. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. The diluent chamber contains Dextrose Injection USP. The concentration of Hydrous Dextrose USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. Dextrose hydrous USP has been added to the diluent to adjust osmolality (approximately 2.05 g and 1.45 g to 750 mg and 1.5 g dosages, respectively). After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality of the reconstituted solution for Cefuroxime for Injection USP and Dextrose Injection USP is 290 mOsmol/kg. Not made with natural rubber latex, PVC or Di (2-ethylhexyl) phthalate (DEHP). The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3123-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3123-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3123-11</NDC11Code>
<ProductNDC>0264-3123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefoxitin And Dextrose</ProprietaryName>
<NonProprietaryName>Cefoxitin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060310</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA065214</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFOXITIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefoxitin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible isolates of the designated bacteria (1): 1 Lower respiratory tract infections (1.1);, 2 Urinary tract infections (1.2);, 3 Intra-abdominal infections (1.3);, 4 Gynecological infections (1.4);, 5 Septicemia (1.5);, 6 Bone and joint infections (1.6);, 7 Skin and skin structure infections (1.7);, 8 Prophylaxis (1.8).</IndicationAndUsage>
<Description>Cefoxitin for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose packaged combination of cefoxitin sodium USP and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with cefoxitin sodium USP, a semi-synthetic, broad-spectrum cephalosporin antibacterial sealed under nitrogen for intravenous administration. Cefoxitin sodium USP is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the molecular weight is 449.44. The structural formula is. Cefoxitin sodium contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin activity. The diluent chamber contains Dextrose Injection. The concentration of Dextrose Hydrous USP in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Hydrous USP has been added to adjust the osmolality to approximately 290 mOsmol/kg (approximately 2 g (4% w/v) and 1.1 g (2.2% w/v) to the 1 g and 2 g doses, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic and antimicrobial agents. Dextrose Hydrous USP has the following structural (molecular) formula. The molecular weight of Dextrose Hydrous USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted according to instructions in the product labeling, the approximate osmolality of the reconstituted solution of Cefoxitin for Injection and Dextrose Injection is approximately 290 mOsmol/kg. After reconstitution, each 50 mL contains 1 gram of cefoxitin (equivalent to 1.05 gram of cefoxitin sodium) or 2 grams of cefoxitin (equivalent to 2.10 grams of cefoxitin sodium), with a pH of approximately 6.5. Solutions of Cefoxitin for Injection and Dextrose Injection range from colorless to light amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3125-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3125-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3125-11</NDC11Code>
<ProductNDC>0264-3125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefoxitin And Dextrose</ProprietaryName>
<NonProprietaryName>Cefoxitin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060310</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA065214</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFOXITIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefoxitin for Injection and Dextrose Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible isolates of the designated bacteria (1): 1 Lower respiratory tract infections (1.1);, 2 Urinary tract infections (1.2);, 3 Intra-abdominal infections (1.3);, 4 Gynecological infections (1.4);, 5 Septicemia (1.5);, 6 Bone and joint infections (1.6);, 7 Skin and skin structure infections (1.7);, 8 Prophylaxis (1.8).</IndicationAndUsage>
<Description>Cefoxitin for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose packaged combination of cefoxitin sodium USP and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with cefoxitin sodium USP, a semi-synthetic, broad-spectrum cephalosporin antibacterial sealed under nitrogen for intravenous administration. Cefoxitin sodium USP is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the molecular weight is 449.44. The structural formula is. Cefoxitin sodium contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin activity. The diluent chamber contains Dextrose Injection. The concentration of Dextrose Hydrous USP in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Hydrous USP has been added to adjust the osmolality to approximately 290 mOsmol/kg (approximately 2 g (4% w/v) and 1.1 g (2.2% w/v) to the 1 g and 2 g doses, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic and antimicrobial agents. Dextrose Hydrous USP has the following structural (molecular) formula. The molecular weight of Dextrose Hydrous USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted according to instructions in the product labeling, the approximate osmolality of the reconstituted solution of Cefoxitin for Injection and Dextrose Injection is approximately 290 mOsmol/kg. After reconstitution, each 50 mL contains 1 gram of cefoxitin (equivalent to 1.05 gram of cefoxitin sodium) or 2 grams of cefoxitin (equivalent to 2.10 grams of cefoxitin sodium), with a pH of approximately 6.5. Solutions of Cefoxitin for Injection and Dextrose Injection range from colorless to light amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3143-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3143-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3143-11</NDC11Code>
<ProductNDC>0264-3143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftazidime And Dextrose</ProprietaryName>
<NonProprietaryName>Ceftazidime</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050823</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFTAZIDIME</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0264-3145-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3145-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3145-11</NDC11Code>
<ProductNDC>0264-3145</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftazidime And Dextrose</ProprietaryName>
<NonProprietaryName>Ceftazidime</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050823</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFTAZIDIME</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0264-3153-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3153-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3153-11</NDC11Code>
<ProductNDC>0264-3153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone And Dextrose</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050420</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050796</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ceftriaxone for Injection and Dextrose Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.</IndicationAndUsage>
<Description>Ceftriaxone for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose, packaged combination of Ceftriaxone Sodium and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with ceftriaxone sodium, a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is supplied as a dry powder form equivalent to either 1 g or 2 g of ceftriaxone. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity. The diluent chamber contains Dextrose Injection. The concentration of Hydrous Dextrose in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose USP has been added to adjust osmolality (approximately 1.87 g and 1.11 g to 1 g and 2 g dosages, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality for the reconstituted solution for Ceftriaxone for Injection and Dextrose Injection is 290 mOsmol/kg. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3155-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3155-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3155-11</NDC11Code>
<ProductNDC>0264-3155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone And Dextrose</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050420</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050796</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ceftriaxone for Injection and Dextrose Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.</IndicationAndUsage>
<Description>Ceftriaxone for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose, packaged combination of Ceftriaxone Sodium and Dextrose Injection (diluent) in the DUPLEX® sterile container. The DUPLEX® Container is a flexible dual chamber container. The drug chamber is filled with ceftriaxone sodium, a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is supplied as a dry powder form equivalent to either 1 g or 2 g of ceftriaxone. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity. The diluent chamber contains Dextrose Injection. The concentration of Hydrous Dextrose in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose USP has been added to adjust osmolality (approximately 1.87 g and 1.11 g to 1 g and 2 g dosages, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Hydrous Dextrose USP has the following structural (molecular) formula. The molecular weight of Hydrous Dextrose USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted, the approximate osmolality for the reconstituted solution for Ceftriaxone for Injection and Dextrose Injection is 290 mOsmol/kg. Not made with natural rubber latex, PVC or DEHP. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3173-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3173-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3173-11</NDC11Code>
<ProductNDC>0264-3173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotetan And Dextrose</ProprietaryName>
<NonProprietaryName>Cefotetan And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA065430</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFOTETAN DISODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0264-3175-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3175-11) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3175-11</NDC11Code>
<ProductNDC>0264-3175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotetan And Dextrose</ProprietaryName>
<NonProprietaryName>Cefotetan And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA065430</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFOTETAN DISODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>