{
"NDC": [
{
"NDCCode": "0069-0971-95",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-0971-95) / 473 mL in 1 BOTTLE",
"NDC11Code": "00069-0971-95",
"ProductNDC": "0069-0971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vibramycin Calcium",
"NonProprietaryName": "Doxycycline Calcium",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "19740923",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050480",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DOXYCYCLINE CALCIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Vibramycin and other antibacterial drugs, Vibramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Vibramycin is an antibacterial drug synthetically derived from oxytetracycline, and is available as Vibramycin Monohydrate (doxycycline monohydrate); Vibramycin Hyclate and Vibra-Tabs (doxycycline hydrochloride hemiethanolate hemihydrate); and Vibramycin Calcium (doxycycline calcium) for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8∙H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8∙HCl)2∙C2H6O∙H2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients in the syrup formulation are: apple flavor; butylparaben; calcium chloride; carmine; glycerin; hydrochloric acid; magnesium aluminum silicate; povidone; propylene glycol; propylparaben; raspberry flavor; simethicone emulsion; sodium hydroxide; sodium metabisulfite; sorbitol solution; water. Inert ingredients in the capsule formulations are: hard gelatin capsules (which may contain Blue 1 and other inert ingredients); magnesium stearate; microcrystalline cellulose; sodium lauryl sulfate. Inert ingredients for the oral suspension formulation are: carboxymethylcellulose sodium; Blue 1; methylparaben; microcrystalline cellulose; propylparaben; raspberry flavor; Red 28; simethicone emulsion; sucrose. Inert ingredients for the tablet formulation are: ethylcellulose; hypromellose; magnesium stearate; microcrystalline cellulose; propylene glycol; sodium lauryl sulfate; talc; titanium dioxide; Yellow 6 Lake."
},
{
"NDCCode": "0069-0971-93",
"PackageDescription": "473 mL in 1 BOTTLE (0069-0971-93) ",
"NDC11Code": "00069-0971-93",
"ProductNDC": "0069-0971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vibramycin Calcium",
"NonProprietaryName": "Doxycycline Calcium",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "19740923",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050480",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DOXYCYCLINE CALCIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19740923",
"EndMarketingDatePackage": "20211130",
"SamplePackage": "N"
},
{
"NDCCode": "42385-971-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (42385-971-01) ",
"NDC11Code": "42385-0971-01",
"ProductNDC": "42385-971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210959",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230306",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.",
"Description": "Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "42385-971-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42385-971-05) ",
"NDC11Code": "42385-0971-05",
"ProductNDC": "42385-971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210959",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230306",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.",
"Description": "Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "42385-971-11",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (42385-971-11) ",
"NDC11Code": "42385-0971-11",
"ProductNDC": "42385-971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210959",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230306",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.",
"Description": "Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "42385-971-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (42385-971-60) ",
"NDC11Code": "42385-0971-60",
"ProductNDC": "42385-971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210959",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230306",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.",
"Description": "Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "0069-0195-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0195-02) / .2 mL in 1 SYRINGE (0069-0195-01) ",
"NDC11Code": "00069-0195-02",
"ProductNDC": "0069-0195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/.2mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0196-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0196-02) / .2 mL in 1 SYRINGE (0069-0196-01) ",
"NDC11Code": "00069-0196-02",
"ProductNDC": "0069-0196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[iU]/.2mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0197-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-0197-30) ",
"NDC11Code": "00069-0197-30",
"ProductNDC": "0069-0197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vizimpro",
"NonProprietaryName": "Dacomitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181004",
"EndMarketingDate": "20291231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211288",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DACOMITINIB",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181004",
"EndMarketingDatePackage": "20291231",
"SamplePackage": "N",
"IndicationAndUsage": "VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].",
"Description": "Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake."
},
{
"NDCCode": "0069-0206-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0206-02) / .3 mL in 1 SYRINGE (0069-0206-01) ",
"NDC11Code": "00069-0206-02",
"ProductNDC": "0069-0206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "7500",
"StrengthUnit": "[iU]/.3mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0217-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0217-02) / 1 mL in 1 SYRINGE (0069-0217-01) ",
"NDC11Code": "00069-0217-02",
"ProductNDC": "0069-0217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0220-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0220-02) / .5 mL in 1 SYRINGE (0069-0220-01) ",
"NDC11Code": "00069-0220-02",
"ProductNDC": "0069-0220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "12500",
"StrengthUnit": "[iU]/.5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0223-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0223-02) / .6 mL in 1 SYRINGE (0069-0223-01) ",
"NDC11Code": "00069-0223-02",
"ProductNDC": "0069-0223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "15000",
"StrengthUnit": "[iU]/.6mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0228-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0228-02) / .72 mL in 1 SYRINGE (0069-0228-01) ",
"NDC11Code": "00069-0228-02",
"ProductNDC": "0069-0228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "18000",
"StrengthUnit": "[iU]/.72mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0232-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0069-0232-01) / 3.8 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00069-0232-01",
"ProductNDC": "0069-0232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "25000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0253-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0069-0253-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0069-0253-01) ",
"NDC11Code": "00069-0253-10",
"ProductNDC": "0069-0253",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20221017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221017",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0550-38",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (0069-0550-38) ",
"NDC11Code": "00069-0550-38",
"ProductNDC": "0069-0550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sutent",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021938",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060126",
"SamplePackage": "N",
"IndicationAndUsage": "SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).",
"Description": "Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide."
},
{
"NDCCode": "0069-0770-38",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (0069-0770-38) ",
"NDC11Code": "00069-0770-38",
"ProductNDC": "0069-0770",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sutent",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021938",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060126",
"SamplePackage": "N",
"IndicationAndUsage": "SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).",
"Description": "Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide."
},
{
"NDCCode": "0069-0830-38",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (0069-0830-38) ",
"NDC11Code": "00069-0830-38",
"ProductNDC": "0069-0830",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sutent",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20140712",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021938",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140712",
"SamplePackage": "N",
"IndicationAndUsage": "SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).",
"Description": "Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide."
},
{
"NDCCode": "0069-0980-38",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (0069-0980-38) ",
"NDC11Code": "00069-0980-38",
"ProductNDC": "0069-0980",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sutent",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021938",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060126",
"SamplePackage": "N",
"IndicationAndUsage": "SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).",
"Description": "Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide."
},
{
"NDCCode": "0069-1198-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-1198-30) ",
"NDC11Code": "00069-1198-30",
"ProductNDC": "0069-1198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vizimpro",
"NonProprietaryName": "Dacomitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181004",
"EndMarketingDate": "20280930",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211288",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DACOMITINIB",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181004",
"EndMarketingDatePackage": "20280930",
"SamplePackage": "N",
"IndicationAndUsage": "VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].",
"Description": "Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake."
},
{
"NDCCode": "0069-2299-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-2299-30) ",
"NDC11Code": "00069-2299-30",
"ProductNDC": "0069-2299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vizimpro",
"NonProprietaryName": "Dacomitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181004",
"EndMarketingDate": "20281031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211288",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DACOMITINIB",
"StrengthNumber": "45",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181004",
"EndMarketingDatePackage": "20281031",
"SamplePackage": "N",
"IndicationAndUsage": "VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].",
"Description": "Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake."
},
{
"NDCCode": "68472-069-01",
"PackageDescription": "1 TUBE in 1 CARTON (68472-069-01) > 50 mL in 1 TUBE",
"NDC11Code": "68472-0069-01",
"ProductNDC": "68472-069",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Soft And Sheer Tinted Moisturiser Fair",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100305",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Boots Retail USA Inc",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "2.5; .95",
"StrengthUnit": "mL/50mL; mL/50mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Directions: 1 Shake before use., 2 Smooth on evenly, just like your usual moisturiser., 3 Apply evenly at least 15 minutes before sun exposure., 4 Reapply as needed., 5 Not intended for children under the age of 12., 6 Not intended for protection while sunbathing."
},
{
"NDCCode": "0220-0971-41",
"PackageDescription": "6 [hp_C] in 1 TUBE (0220-0971-41) ",
"NDC11Code": "00220-0971-41",
"ProductNDC": "0220-0971",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calcarea Fluorica",
"NonProprietaryName": "Calcium Fluoride",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "CALCIUM FLUORIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/6[hp_C]",
"Status": "Active",
"LastUpdate": "2023-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Repeated Sprains*."
},
{
"NDCCode": "0268-0971-10",
"PackageDescription": "10 mL in 1 VIAL (0268-0971-10) ",
"NDC11Code": "00268-0971-10",
"ProductNDC": "0268-0971",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Curvularia",
"NonProprietaryName": "Curvularia Inaequalis",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "CURVULARIA INAEQUALIS",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "0363-0971-26",
"PackageDescription": "1 BOTTLE in 1 CARTON (0363-0971-26) / 118 mL in 1 BOTTLE",
"NDC11Code": "00363-0971-26",
"ProductNDC": "0363-0971",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Pain And Fever",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20100215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Walgreen Company",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "160",
"StrengthUnit": "mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20100215",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily: 1 reduces fever, 2 relieves minor aches and pains due to:, 3 the common cold, 4 flu, 5 headache , 6 sore throat, 7 toothache."
},
{
"NDCCode": "0363-0971-28",
"PackageDescription": "1 BOTTLE in 1 CARTON (0363-0971-28) > 148 mL in 1 BOTTLE",
"NDC11Code": "00363-0971-28",
"ProductNDC": "0363-0971",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Pain And Fever",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20100215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Walgreen Company",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "160",
"StrengthUnit": "mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2023-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20130822",
"SamplePackage": "N"
},
{
"NDCCode": "0363-0971-34",
"PackageDescription": "2 BOTTLE in 1 CARTON (0363-0971-34) > 118 mL in 1 BOTTLE",
"NDC11Code": "00363-0971-34",
"ProductNDC": "0363-0971",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Pain And Fever",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20100215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Walgreen Company",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "160",
"StrengthUnit": "mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2023-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20131217",
"SamplePackage": "N"
},
{
"NDCCode": "0525-0971-10",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0525-0971-10) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00525-0971-10",
"ProductNDC": "0525-0971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zelnorm",
"NonProprietaryName": "Tegaserod",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190801",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021200",
"LabelerName": "Alfasigma USA, Inc.",
"SubstanceName": "TEGASEROD",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA],Serotonin-4 Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "ZELNORM is indicated for the treatment of adult women less than 65 years of age with irritable bowel syndrome with constipation (IBS-C). Limitations of Use: 1 The safety and effectiveness of ZELNORM in men with IBS-C have not been established [see Clinical Studies (14)].",
"Description": "ZELNORM oral tablets contain tegaserod, a serotonin-4 (5-HT4) receptor agonist, as the hydrogen maleate salt. As the maleate salt, tegaserod is chemically designated as 3-(5-methoxy-1H-indol-3-ylmethylene)-N-pentylcarbazimidamide hydrogen maleate. Its empirical formula is C16H23N5OC4H4O4. The molecular weight is 417.47 and the structural formula is. Tegaserod as the maleate salt is a white to off-white crystalline powder and is slightly soluble in ethanol and very slightly soluble in water. Each ZELNORM tablet contains 6 mg of tegaserod (equivalent to 8.31 mg of tegaserod maleate) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, glyceryl behenate, hypromellose, and lactose monohydrate."
},
{
"NDCCode": "0525-0971-30",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (0525-0971-30) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00525-0971-30",
"ProductNDC": "0525-0971",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zelnorm",
"NonProprietaryName": "Tegaserod",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190801",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021200",
"LabelerName": "Alfasigma USA, Inc.",
"SubstanceName": "TEGASEROD",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA],Serotonin-4 Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "ZELNORM is indicated for the treatment of adult women less than 65 years of age with irritable bowel syndrome with constipation (IBS-C). Limitations of Use: 1 The safety and effectiveness of ZELNORM in men with IBS-C have not been established [see Clinical Studies (14)].",
"Description": "ZELNORM oral tablets contain tegaserod, a serotonin-4 (5-HT4) receptor agonist, as the hydrogen maleate salt. As the maleate salt, tegaserod is chemically designated as 3-(5-methoxy-1H-indol-3-ylmethylene)-N-pentylcarbazimidamide hydrogen maleate. Its empirical formula is C16H23N5OC4H4O4. The molecular weight is 417.47 and the structural formula is. Tegaserod as the maleate salt is a white to off-white crystalline powder and is slightly soluble in ethanol and very slightly soluble in water. Each ZELNORM tablet contains 6 mg of tegaserod (equivalent to 8.31 mg of tegaserod maleate) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, glyceryl behenate, hypromellose, and lactose monohydrate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0069-0971-95</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-0971-95) / 473 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-0971-95</NDC11Code>
<ProductNDC>0069-0971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vibramycin Calcium</ProprietaryName>
<NonProprietaryName>Doxycycline Calcium</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19740923</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050480</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DOXYCYCLINE CALCIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Vibramycin and other antibacterial drugs, Vibramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Vibramycin is an antibacterial drug synthetically derived from oxytetracycline, and is available as Vibramycin Monohydrate (doxycycline monohydrate); Vibramycin Hyclate and Vibra-Tabs (doxycycline hydrochloride hemiethanolate hemihydrate); and Vibramycin Calcium (doxycycline calcium) for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8∙H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8∙HCl)2∙C2H6O∙H2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients in the syrup formulation are: apple flavor; butylparaben; calcium chloride; carmine; glycerin; hydrochloric acid; magnesium aluminum silicate; povidone; propylene glycol; propylparaben; raspberry flavor; simethicone emulsion; sodium hydroxide; sodium metabisulfite; sorbitol solution; water. Inert ingredients in the capsule formulations are: hard gelatin capsules (which may contain Blue 1 and other inert ingredients); magnesium stearate; microcrystalline cellulose; sodium lauryl sulfate. Inert ingredients for the oral suspension formulation are: carboxymethylcellulose sodium; Blue 1; methylparaben; microcrystalline cellulose; propylparaben; raspberry flavor; Red 28; simethicone emulsion; sucrose. Inert ingredients for the tablet formulation are: ethylcellulose; hypromellose; magnesium stearate; microcrystalline cellulose; propylene glycol; sodium lauryl sulfate; talc; titanium dioxide; Yellow 6 Lake.</Description>
</NDC>
<NDC>
<NDCCode>0069-0971-93</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (0069-0971-93) </PackageDescription>
<NDC11Code>00069-0971-93</NDC11Code>
<ProductNDC>0069-0971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vibramycin Calcium</ProprietaryName>
<NonProprietaryName>Doxycycline Calcium</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19740923</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050480</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DOXYCYCLINE CALCIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740923</StartMarketingDatePackage>
<EndMarketingDatePackage>20211130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42385-971-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (42385-971-01) </PackageDescription>
<NDC11Code>42385-0971-01</NDC11Code>
<ProductNDC>42385-971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210959</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.</IndicationAndUsage>
<Description>Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>42385-971-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42385-971-05) </PackageDescription>
<NDC11Code>42385-0971-05</NDC11Code>
<ProductNDC>42385-971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210959</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.</IndicationAndUsage>
<Description>Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>42385-971-11</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (42385-971-11) </PackageDescription>
<NDC11Code>42385-0971-11</NDC11Code>
<ProductNDC>42385-971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210959</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.</IndicationAndUsage>
<Description>Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>42385-971-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (42385-971-60) </PackageDescription>
<NDC11Code>42385-0971-60</NDC11Code>
<ProductNDC>42385-971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210959</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1) Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1) Treatment of rheumatoid arthritis in adults. (1.2) Treatment of systemic lupus erythematosus in adults. (1.3) Treatment of chronic discoid lupus erythematosus in adults. (1.4)Limitations of Use (1.1): Hydroxychloroquine sulfate tablets are not recommended for the: Treatment of complicated malaria. Treatment of chloroquine or hydroxychloroquine-resistant strains ofPlasmodium species. Treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified. Prophylaxis of malaria in geographic areas where chloroquine resistance occurs. Prevention of relapses of P. vivax or P. ovale because it is not active against the hypnozoite liver stage forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline drug is necessary.</IndicationAndUsage>
<Description>Hydroxychloroquine is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is:. Hydroxychloroquine sulfate USP is a white or off-white to slightly yellowish color powder, freely soluble in water and practically insoluble in ethanol. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: lactose monohydrate, magnesium stearate, maize starch and povidone. The film coating contains polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>0069-0195-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0195-02) / .2 mL in 1 SYRINGE (0069-0195-01) </PackageDescription>
<NDC11Code>00069-0195-02</NDC11Code>
<ProductNDC>0069-0195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/.2mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0196-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0196-02) / .2 mL in 1 SYRINGE (0069-0196-01) </PackageDescription>
<NDC11Code>00069-0196-02</NDC11Code>
<ProductNDC>0069-0196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[iU]/.2mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0197-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-0197-30) </PackageDescription>
<NDC11Code>00069-0197-30</NDC11Code>
<ProductNDC>0069-0197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vizimpro</ProprietaryName>
<NonProprietaryName>Dacomitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181004</StartMarketingDate>
<EndMarketingDate>20291231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211288</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DACOMITINIB</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181004</StartMarketingDatePackage>
<EndMarketingDatePackage>20291231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0069-0206-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0206-02) / .3 mL in 1 SYRINGE (0069-0206-01) </PackageDescription>
<NDC11Code>00069-0206-02</NDC11Code>
<ProductNDC>0069-0206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>7500</StrengthNumber>
<StrengthUnit>[iU]/.3mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0217-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0217-02) / 1 mL in 1 SYRINGE (0069-0217-01) </PackageDescription>
<NDC11Code>00069-0217-02</NDC11Code>
<ProductNDC>0069-0217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0220-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0220-02) / .5 mL in 1 SYRINGE (0069-0220-01) </PackageDescription>
<NDC11Code>00069-0220-02</NDC11Code>
<ProductNDC>0069-0220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>12500</StrengthNumber>
<StrengthUnit>[iU]/.5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0223-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0223-02) / .6 mL in 1 SYRINGE (0069-0223-01) </PackageDescription>
<NDC11Code>00069-0223-02</NDC11Code>
<ProductNDC>0069-0223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>15000</StrengthNumber>
<StrengthUnit>[iU]/.6mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0228-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0228-02) / .72 mL in 1 SYRINGE (0069-0228-01) </PackageDescription>
<NDC11Code>00069-0228-02</NDC11Code>
<ProductNDC>0069-0228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>18000</StrengthNumber>
<StrengthUnit>[iU]/.72mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0232-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0069-0232-01) / 3.8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00069-0232-01</NDC11Code>
<ProductNDC>0069-0232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>25000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0253-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0069-0253-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0069-0253-01) </PackageDescription>
<NDC11Code>00069-0253-10</NDC11Code>
<ProductNDC>0069-0253</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20221017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0550-38</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (0069-0550-38) </PackageDescription>
<NDC11Code>00069-0550-38</NDC11Code>
<ProductNDC>0069-0550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sutent</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021938</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0770-38</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (0069-0770-38) </PackageDescription>
<NDC11Code>00069-0770-38</NDC11Code>
<ProductNDC>0069-0770</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sutent</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021938</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0830-38</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (0069-0830-38) </PackageDescription>
<NDC11Code>00069-0830-38</NDC11Code>
<ProductNDC>0069-0830</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sutent</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140712</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021938</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140712</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0980-38</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (0069-0980-38) </PackageDescription>
<NDC11Code>00069-0980-38</NDC11Code>
<ProductNDC>0069-0980</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sutent</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021938</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-1198-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-1198-30) </PackageDescription>
<NDC11Code>00069-1198-30</NDC11Code>
<ProductNDC>0069-1198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vizimpro</ProprietaryName>
<NonProprietaryName>Dacomitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181004</StartMarketingDate>
<EndMarketingDate>20280930</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211288</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DACOMITINIB</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181004</StartMarketingDatePackage>
<EndMarketingDatePackage>20280930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0069-2299-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-2299-30) </PackageDescription>
<NDC11Code>00069-2299-30</NDC11Code>
<ProductNDC>0069-2299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vizimpro</ProprietaryName>
<NonProprietaryName>Dacomitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181004</StartMarketingDate>
<EndMarketingDate>20281031</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211288</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DACOMITINIB</SubstanceName>
<StrengthNumber>45</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181004</StartMarketingDatePackage>
<EndMarketingDatePackage>20281031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>68472-069-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68472-069-01) > 50 mL in 1 TUBE</PackageDescription>
<NDC11Code>68472-0069-01</NDC11Code>
<ProductNDC>68472-069</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Soft And Sheer Tinted Moisturiser Fair</ProprietaryName>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100305</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Boots Retail USA Inc</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2.5; .95</StrengthNumber>
<StrengthUnit>mL/50mL; mL/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Directions: 1 Shake before use., 2 Smooth on evenly, just like your usual moisturiser., 3 Apply evenly at least 15 minutes before sun exposure., 4 Reapply as needed., 5 Not intended for children under the age of 12., 6 Not intended for protection while sunbathing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0220-0971-41</NDCCode>
<PackageDescription>6 [hp_C] in 1 TUBE (0220-0971-41) </PackageDescription>
<NDC11Code>00220-0971-41</NDC11Code>
<ProductNDC>0220-0971</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calcarea Fluorica</ProprietaryName>
<NonProprietaryName>Calcium Fluoride</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>CALCIUM FLUORIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/6[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Repeated Sprains*.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0268-0971-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL (0268-0971-10) </PackageDescription>
<NDC11Code>00268-0971-10</NDC11Code>
<ProductNDC>0268-0971</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Curvularia</ProprietaryName>
<NonProprietaryName>Curvularia Inaequalis</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>CURVULARIA INAEQUALIS</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0363-0971-26</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0363-0971-26) / 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00363-0971-26</NDC11Code>
<ProductNDC>0363-0971</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Pain And Fever</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily: 1 reduces fever, 2 relieves minor aches and pains due to:, 3 the common cold, 4 flu, 5 headache , 6 sore throat, 7 toothache.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-0971-28</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0363-0971-28) > 148 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00363-0971-28</NDC11Code>
<ProductNDC>0363-0971</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Pain And Fever</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0363-0971-34</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (0363-0971-34) > 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00363-0971-34</NDC11Code>
<ProductNDC>0363-0971</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Pain And Fever</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0525-0971-10</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0525-0971-10) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00525-0971-10</NDC11Code>
<ProductNDC>0525-0971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zelnorm</ProprietaryName>
<NonProprietaryName>Tegaserod</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190801</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021200</ApplicationNumber>
<LabelerName>Alfasigma USA, Inc.</LabelerName>
<SubstanceName>TEGASEROD</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA],Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZELNORM is indicated for the treatment of adult women less than 65 years of age with irritable bowel syndrome with constipation (IBS-C). Limitations of Use: 1 The safety and effectiveness of ZELNORM in men with IBS-C have not been established [see Clinical Studies (14)].</IndicationAndUsage>
<Description>ZELNORM oral tablets contain tegaserod, a serotonin-4 (5-HT4) receptor agonist, as the hydrogen maleate salt. As the maleate salt, tegaserod is chemically designated as 3-(5-methoxy-1H-indol-3-ylmethylene)-N-pentylcarbazimidamide hydrogen maleate. Its empirical formula is C16H23N5OC4H4O4. The molecular weight is 417.47 and the structural formula is. Tegaserod as the maleate salt is a white to off-white crystalline powder and is slightly soluble in ethanol and very slightly soluble in water. Each ZELNORM tablet contains 6 mg of tegaserod (equivalent to 8.31 mg of tegaserod maleate) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, glyceryl behenate, hypromellose, and lactose monohydrate.</Description>
</NDC>
<NDC>
<NDCCode>0525-0971-30</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (0525-0971-30) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00525-0971-30</NDC11Code>
<ProductNDC>0525-0971</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zelnorm</ProprietaryName>
<NonProprietaryName>Tegaserod</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190801</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021200</ApplicationNumber>
<LabelerName>Alfasigma USA, Inc.</LabelerName>
<SubstanceName>TEGASEROD</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA],Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZELNORM is indicated for the treatment of adult women less than 65 years of age with irritable bowel syndrome with constipation (IBS-C). Limitations of Use: 1 The safety and effectiveness of ZELNORM in men with IBS-C have not been established [see Clinical Studies (14)].</IndicationAndUsage>
<Description>ZELNORM oral tablets contain tegaserod, a serotonin-4 (5-HT4) receptor agonist, as the hydrogen maleate salt. As the maleate salt, tegaserod is chemically designated as 3-(5-methoxy-1H-indol-3-ylmethylene)-N-pentylcarbazimidamide hydrogen maleate. Its empirical formula is C16H23N5OC4H4O4. The molecular weight is 417.47 and the structural formula is. Tegaserod as the maleate salt is a white to off-white crystalline powder and is slightly soluble in ethanol and very slightly soluble in water. Each ZELNORM tablet contains 6 mg of tegaserod (equivalent to 8.31 mg of tegaserod maleate) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, glyceryl behenate, hypromellose, and lactose monohydrate.</Description>
</NDC>
</NDCList>