{
"NDC": [
{
"NDCCode": "0069-3140-19",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-3140-19) / 30 mL in 1 BOTTLE",
"NDC11Code": "00069-3140-19",
"ProductNDC": "0069-3140",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19951019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050710",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19951019",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).",
"Description": "ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "0069-2465-01",
"PackageDescription": "1 VIAL in 1 CARTON (0069-2465-01) / .5 mL in 1 VIAL (0069-2465-19) ",
"NDC11Code": "00069-2465-01",
"ProductNDC": "0069-2465",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Abrysvo",
"NonProprietaryName": "Respiratory Syncytial Virus Vaccine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20240730",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125769",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "RECOMBINANT STABILIZED RSV A PREFUSION F ANTIGEN; RECOMBINANT STABILIZED RSV B PREFUSION F ANTIGEN",
"StrengthNumber": ".06; .06",
"StrengthUnit": "mg/.5mL; mg/.5mL",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240730",
"SamplePackage": "N",
"IndicationAndUsage": "ABRYSVO is a vaccine indicated for: 1 Active immunization of pregnant individuals at 32 through 36 weeks gestational age for the prevention of lower respiratory tract disease (LRTD) and severe LRTD caused by respiratory syncytial virus (RSV) in infants from birth through 6 months of age. (1.1), 2 Active immunization for the prevention of LRTD caused by RSV in individuals 60 years of age and older. (1.2), 3 Active immunization for the prevention of LRTD caused by RSV in individuals 18 through 59 years of age who are at increased risk for LRTD caused by RSV. (1.3).",
"Description": "ABRYSVO (Respiratory Syncytial Virus Vaccine) is a sterile solution for intramuscular use. The vaccine is supplied as a vial of Lyophilized Antigen Component that is reconstituted at the time of use with a Sterile Water Diluent Component. The antigen component contains recombinant RSV preF A and RSV preF B. The RSV preF A and RSV preF B recombinant proteins are expressed in genetically engineered Chinese Hamster Ovary cell lines grown in suspension culture using chemically-defined media, without antibiotics or animal-derived components. The recombinant proteins are purified through a series of column chromatography and filtration steps followed by formulation, filling into vials, and lyophilization. After reconstitution, a single dose of ABRYSVO is formulated to contain 120 mcg of RSV stabilized prefusion F proteins (60 mcg RSV preF A and 60 mcg RSV preF B) per 0.5 mL. ABRYSVO also contains the following buffer ingredients: 0.11 mg tromethamine, 1.04 mg tromethamine hydrochloride, 11.3 mg sucrose, 22.5 mg mannitol, 0.08 mg polysorbate 80, and 1.1 mg sodium chloride per 0.5 mL. ABRYSVO is a sterile, clear, and colorless solution. ABRYSVO contains no preservatives. Each dose may also contain residual amounts of host cell proteins (≤0.1% w/w) and DNA (<0.4 ng/mg of total protein) from the manufacturing process. The Act-O-Vial stoppers, vial stoppers and tip cap and rubber plunger of the prefilled syringe are not made with natural rubber latex."
},
{
"NDCCode": "0069-2465-10",
"PackageDescription": "10 VIAL in 1 CARTON (0069-2465-10) / .5 mL in 1 VIAL (0069-2465-19) ",
"NDC11Code": "00069-2465-10",
"ProductNDC": "0069-2465",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Abrysvo",
"NonProprietaryName": "Respiratory Syncytial Virus Vaccine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20240730",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125769",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "RECOMBINANT STABILIZED RSV A PREFUSION F ANTIGEN; RECOMBINANT STABILIZED RSV B PREFUSION F ANTIGEN",
"StrengthNumber": ".06; .06",
"StrengthUnit": "mg/.5mL; mg/.5mL",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240730",
"SamplePackage": "N",
"IndicationAndUsage": "ABRYSVO is a vaccine indicated for: 1 Active immunization of pregnant individuals at 32 through 36 weeks gestational age for the prevention of lower respiratory tract disease (LRTD) and severe LRTD caused by respiratory syncytial virus (RSV) in infants from birth through 6 months of age. (1.1), 2 Active immunization for the prevention of LRTD caused by RSV in individuals 60 years of age and older. (1.2), 3 Active immunization for the prevention of LRTD caused by RSV in individuals 18 through 59 years of age who are at increased risk for LRTD caused by RSV. (1.3).",
"Description": "ABRYSVO (Respiratory Syncytial Virus Vaccine) is a sterile solution for intramuscular use. The vaccine is supplied as a vial of Lyophilized Antigen Component that is reconstituted at the time of use with a Sterile Water Diluent Component. The antigen component contains recombinant RSV preF A and RSV preF B. The RSV preF A and RSV preF B recombinant proteins are expressed in genetically engineered Chinese Hamster Ovary cell lines grown in suspension culture using chemically-defined media, without antibiotics or animal-derived components. The recombinant proteins are purified through a series of column chromatography and filtration steps followed by formulation, filling into vials, and lyophilization. After reconstitution, a single dose of ABRYSVO is formulated to contain 120 mcg of RSV stabilized prefusion F proteins (60 mcg RSV preF A and 60 mcg RSV preF B) per 0.5 mL. ABRYSVO also contains the following buffer ingredients: 0.11 mg tromethamine, 1.04 mg tromethamine hydrochloride, 11.3 mg sucrose, 22.5 mg mannitol, 0.08 mg polysorbate 80, and 1.1 mg sodium chloride per 0.5 mL. ABRYSVO is a sterile, clear, and colorless solution. ABRYSVO contains no preservatives. Each dose may also contain residual amounts of host cell proteins (≤0.1% w/w) and DNA (<0.4 ng/mg of total protein) from the manufacturing process. The Act-O-Vial stoppers, vial stoppers and tip cap and rubber plunger of the prefilled syringe are not made with natural rubber latex."
},
{
"NDCCode": "0069-3110-19",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-3110-19) / 15 mL in 1 BOTTLE",
"NDC11Code": "00069-3110-19",
"ProductNDC": "0069-3110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19951019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050710",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19951019",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "0069-3120-19",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-3120-19) / 15 mL in 1 BOTTLE",
"NDC11Code": "00069-3120-19",
"ProductNDC": "0069-3120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19951019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050710",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19951019",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).",
"Description": "ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "0069-3130-19",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-3130-19) / 22.5 mL in 1 BOTTLE",
"NDC11Code": "00069-3130-19",
"ProductNDC": "0069-3130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19951019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050710",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19951019",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).",
"Description": "ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "0069-4395-19",
"PackageDescription": "100 mL in 1 BAG (0069-4395-19)",
"NDC11Code": "00069-4395-19",
"ProductNDC": "0069-4395",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078024",
"LabelerName": "Pfizer Labs, Division of Pfizer Inc",
"SubstanceName": "CIPROFLOXACIN",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-01-02",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "49349-069-19",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (49349-069-19)",
"NDC11Code": "49349-0069-19",
"ProductNDC": "49349-069",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076059",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0069-0197-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-0197-30) ",
"NDC11Code": "00069-0197-30",
"ProductNDC": "0069-0197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vizimpro",
"NonProprietaryName": "Dacomitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181004",
"EndMarketingDate": "20291231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211288",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DACOMITINIB",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181004",
"EndMarketingDatePackage": "20291231",
"SamplePackage": "N",
"IndicationAndUsage": "VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].",
"Description": "Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake."
},
{
"NDCCode": "0069-0297-02",
"PackageDescription": "1 SYRINGE in 1 CARTON (0069-0297-02) / .25 mL in 1 SYRINGE (0069-0297-01) ",
"NDC11Code": "00069-0297-02",
"ProductNDC": "0069-0297",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Ticovac",
"NonProprietaryName": "Tick-borne Encephalitis Vaccine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20220627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125740",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "1.2",
"StrengthUnit": "ug/.25mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220627",
"SamplePackage": "N",
"IndicationAndUsage": "TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.",
"Description": "TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives."
},
{
"NDCCode": "0069-0297-10",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0297-10) / .25 mL in 1 SYRINGE (0069-0297-01) ",
"NDC11Code": "00069-0297-10",
"ProductNDC": "0069-0297",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Ticovac",
"NonProprietaryName": "Tick-borne Encephalitis Vaccine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20220627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125740",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "1.2",
"StrengthUnit": "ug/.25mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220627",
"SamplePackage": "N",
"IndicationAndUsage": "TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.",
"Description": "TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives."
},
{
"NDCCode": "0069-0324-01",
"PackageDescription": "1 CARTON in 1 CARTON (0069-0324-01) / 1 SYRINGE in 1 CARTON / .6 mL in 1 SYRINGE",
"NDC11Code": "00069-0324-01",
"ProductNDC": "0069-0324",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nyvepria",
"NonProprietaryName": "Pegfilgrastim-apgf",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20201215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761111",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "PEGFILGRASTIM",
"StrengthNumber": "6",
"StrengthUnit": "mg/.6mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201215",
"SamplePackage": "N",
"IndicationAndUsage": "Patients with Cancer Receiving Myelosuppressive Chemotherapy. NYVEPRIA is indicated in adults and pediatric patients aged newborn and older to decrease the incidence of infection, as manifested by febrile neutropenia, in patients with non-myeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a clinically significant incidence of febrile neutropenia [see Dosage and Administration (2.1) and Clinical Studies (14)].",
"Description": "Pegfilgrastim-apgf is a covalent conjugate of recombinant methionyl human G-CSF and monomethoxypolyethylene glycol. Recombinant methionyl human G-CSF is a water-soluble 175 amino acid protein with a molecular weight of approximately 19 kilodaltons (kD). Recombinant methionyl human G-CSF is obtained from the bacterial fermentation of a strain of E. coli transformed with a genetically engineered plasmid containing the human G-CSF gene. To produce pegfilgrastim-apgf, a 20 kD monomethoxypolyethylene glycol molecule is covalently bound to the N-terminal methionyl residue of recombinant methionyl human G-CSF. The average molecular weight of pegfilgrastim-apgf is approximately 39 kD. NYVEPRIA for manual subcutaneous injection is supplied in 0.6 mL prefilled syringes. The prefilled syringe does not bear graduation marks and is designed to deliver the entire contents of the syringe (6 mg/0.6 mL). The delivered 0.6 mL dose from the prefilled syringe for manual subcutaneous injection contains 6 mg pegfilgrastim-apgf (based on protein weight) in a sterile, clear, colorless, preservative-free solution (pH 4.0) containing acetate (0.35 mg), polysorbate 20 (0.02 mg), sodium (0.01 mg), and sorbitol (30 mg) in Water for Injection, USP."
},
{
"NDCCode": "0069-0328-01",
"PackageDescription": "1 KIT in 1 CARTON (0069-0328-01) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE (0069-0317-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "00069-0328-01",
"ProductNDC": "0069-0328",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231018",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20231018",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn's Disease (CD) (1.5): treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients.Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 8 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 9 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "0069-0334-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (0069-0334-28) ",
"NDC11Code": "00069-0334-28",
"ProductNDC": "0069-0334",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Litfulo",
"NonProprietaryName": "Ritlecitinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230706",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215830",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "RITLECITINIB TOSYLATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Janus Kinase 3 Inhibitors [MoA], Kinase Inhibitor [EPC], Tyrosine Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230706",
"SamplePackage": "N",
"IndicationAndUsage": "LITFULO is a kinase inhibitor indicated for the treatment of severe alopecia areata in adults and adolescents 12 years and older. Limitations of Use: Not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, cyclosporine or other potent immunosuppressants.",
"Description": "LITFULO (ritlecitinib) capsules are formulated with ritlecitinib tosylate, a kinase inhibitor. Ritlecitinib tosylate is a white to off white to pale pink solid which is freely soluble in water. The chemical name is 1-{(2S,5R)-2-Methyl-5-[(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino]piperidin-1-yl}prop-2-en-1-one 4-methylbenzene-1-sulfonic acid. The molecular formula for ritlecitinib tosylate is C22H27N5O4S. The molecular weight is 457.55 g/mol and its structural formula is. LITFULO is supplied for oral administration as a 50 mg immediate-release capsule. Each capsule contains 50 mg ritlecitinib (equivalent to 80.13 mg ritlecitinib tosylate) and the following inactive ingredients: crospovidone, glyceryl dibehenate, lactose monohydrate, microcrystalline cellulose, and hypromellose (HPMC) capsule shells. The yellow/blue, opaque capsule shells contain Brilliant blue FCF – FD&C Blue, hypromellose, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "0069-0345-30",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (0069-0345-30) / 1 KIT in 1 BLISTER PACK (0069-0345-06) * 4 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-01) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-1345-01) ",
"NDC11Code": "00069-0345-30",
"ProductNDC": "0069-0345",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paxlovid",
"NonProprietaryName": "Nirmatrelvir And Ritonavir",
"DosageFormName": "KIT",
"StartMarketingDate": "20220418",
"MarketingCategoryName": "EMERGENCY USE AUTHORIZATION",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220418",
"SamplePackage": "N",
"IndicationAndUsage": "The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.",
"Description": "PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor."
},
{
"NDCCode": "0069-0411-02",
"PackageDescription": "1 SYRINGE in 1 CARTON (0069-0411-02) / .5 mL in 1 SYRINGE (0069-0411-01) ",
"NDC11Code": "00069-0411-02",
"ProductNDC": "0069-0411",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Ticovac",
"NonProprietaryName": "Tick-borne Encephalitis Vaccine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20211025",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125740",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "2.4",
"StrengthUnit": "ug/.5mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211025",
"SamplePackage": "N",
"IndicationAndUsage": "TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.",
"Description": "TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives."
},
{
"NDCCode": "0069-0411-10",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0411-10) / .5 mL in 1 SYRINGE (0069-0411-01) ",
"NDC11Code": "00069-0411-10",
"ProductNDC": "0069-0411",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Ticovac",
"NonProprietaryName": "Tick-borne Encephalitis Vaccine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20211025",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125740",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "2.4",
"StrengthUnit": "ug/.5mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211025",
"SamplePackage": "N",
"IndicationAndUsage": "TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.",
"Description": "TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives."
},
{
"NDCCode": "0069-0505-02",
"PackageDescription": "1 CARTRIDGE in 1 CARTON (0069-0505-02) / 1.2 mL in 1 CARTRIDGE (0069-0505-01) ",
"NDC11Code": "00069-0505-02",
"ProductNDC": "0069-0505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ngenla",
"NonProprietaryName": "Somatrogon-ghla",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761184",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SOMATROGON",
"StrengthNumber": "24",
"StrengthUnit": "mg/1.2mL",
"Pharm_Classes": "11-beta Hydroxysteroid Dehydrogenase Type 1 Inhibitors [MoA], Human Growth Hormone [CS], Recombinant Human Growth Hormone [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"IndicationAndUsage": "NGENLA is indicated for the treatment of pediatric patients aged 3 years and older who have growth failure due to an inadequate secretion of endogenous growth hormone.",
"Description": "Somatrogon-ghla, a human growth hormone analog, is a fusion protein produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. It is comprised of the amino acid sequence of human growth hormone (hGH) with one copy of the C-terminal peptide (CTP) from the beta chain of human chorionic gonadotropin (hCG) at the N-terminus and 2 copies of CTP (in tandem) at the C-terminus. Somatrogon-ghla has an approximate molecular weight of 40 KDa. NGENLA (somatrogon-ghla) injection is a sterile, clear and colorless to slightly light yellow solution for subcutaneous use supplied in a 24 mg/1.2 mL (20 mg/mL) or 60 mg/1.2 mL (50 mg/mL) single-patient-use prefilled pen. Each 1.2 mL of solution contains either 24 mg or 60 mg of somatrogon-ghla, and the inactive ingredients citric acid monohydrate (0.3 mg), histidine (1.9 mg), metacresol (4 mg, as a preservative), poloxamer 188 (2 mg), sodium chloride (10 mg) and sodium citrate (2.8 mg) in water for injection. NGENLA has a pH of approximately 6.6."
},
{
"NDCCode": "0069-0520-02",
"PackageDescription": "1 CARTRIDGE in 1 CARTON (0069-0520-02) / 1.2 mL in 1 CARTRIDGE (0069-0520-01) ",
"NDC11Code": "00069-0520-02",
"ProductNDC": "0069-0520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ngenla",
"NonProprietaryName": "Somatrogon-ghla",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761184",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "SOMATROGON",
"StrengthNumber": "60",
"StrengthUnit": "mg/1.2mL",
"Pharm_Classes": "11-beta Hydroxysteroid Dehydrogenase Type 1 Inhibitors [MoA], Human Growth Hormone [CS], Recombinant Human Growth Hormone [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"IndicationAndUsage": "NGENLA is indicated for the treatment of pediatric patients aged 3 years and older who have growth failure due to an inadequate secretion of endogenous growth hormone.",
"Description": "Somatrogon-ghla, a human growth hormone analog, is a fusion protein produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. It is comprised of the amino acid sequence of human growth hormone (hGH) with one copy of the C-terminal peptide (CTP) from the beta chain of human chorionic gonadotropin (hCG) at the N-terminus and 2 copies of CTP (in tandem) at the C-terminus. Somatrogon-ghla has an approximate molecular weight of 40 KDa. NGENLA (somatrogon-ghla) injection is a sterile, clear and colorless to slightly light yellow solution for subcutaneous use supplied in a 24 mg/1.2 mL (20 mg/mL) or 60 mg/1.2 mL (50 mg/mL) single-patient-use prefilled pen. Each 1.2 mL of solution contains either 24 mg or 60 mg of somatrogon-ghla, and the inactive ingredients citric acid monohydrate (0.3 mg), histidine (1.9 mg), metacresol (4 mg, as a preservative), poloxamer 188 (2 mg), sodium chloride (10 mg) and sodium citrate (2.8 mg) in water for injection. NGENLA has a pH of approximately 6.6."
},
{
"NDCCode": "0069-0521-11",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0069-0521-11) / 1 KIT in 1 BLISTER PACK * 6 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-06) * 5 TABLET, FILM COATED in 1 BLISTER PACK (0069-1735-05) ",
"NDC11Code": "00069-0521-11",
"ProductNDC": "0069-0521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paxlovid",
"NonProprietaryName": "Nirmatrelvir And Ritonavir",
"DosageFormName": "KIT",
"StartMarketingDate": "20250415",
"EndMarketingDate": "20260831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217188",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250415",
"EndMarketingDatePackage": "20260831",
"SamplePackage": "N",
"IndicationAndUsage": "PAXLOVID is indicated for the treatment of mild-to-moderate coronavirus disease 2019 (COVID-19) in adults who are at high risk for progression to severe COVID-19, including hospitalization or death.",
"Description": "PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor."
},
{
"NDCCode": "0069-0600-01",
"PackageDescription": "1 KIT in 1 CARTON (0069-0600-01) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) ",
"NDC11Code": "00069-0600-01",
"ProductNDC": "0069-0600",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Penbraya",
"NonProprietaryName": "Meningococcal Groups A, B, C, W, And Y Vaccine",
"DosageFormName": "KIT",
"StartMarketingDate": "20231127",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125770",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231127",
"SamplePackage": "N",
"IndicationAndUsage": "PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.",
"Description": "PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives."
},
{
"NDCCode": "0069-0600-05",
"PackageDescription": "5 KIT in 1 CARTON (0069-0600-05) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) ",
"NDC11Code": "00069-0600-05",
"ProductNDC": "0069-0600",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Penbraya",
"NonProprietaryName": "Meningococcal Groups A, B, C, W, And Y Vaccine",
"DosageFormName": "KIT",
"StartMarketingDate": "20231127",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125770",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231127",
"SamplePackage": "N",
"IndicationAndUsage": "PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.",
"Description": "PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives."
},
{
"NDCCode": "0069-0600-10",
"PackageDescription": "10 KIT in 1 CARTON (0069-0600-10) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) ",
"NDC11Code": "00069-0600-10",
"ProductNDC": "0069-0600",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Penbraya",
"NonProprietaryName": "Meningococcal Groups A, B, C, W, And Y Vaccine",
"DosageFormName": "KIT",
"StartMarketingDate": "20231127",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125770",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231127",
"SamplePackage": "N",
"IndicationAndUsage": "PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.",
"Description": "PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives."
},
{
"NDCCode": "0069-1011-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1011-02) / 10 mL in 1 BOTTLE, GLASS (0069-1011-01) ",
"NDC11Code": "00069-1011-02",
"ProductNDC": "0069-1011",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "0069-1085-30",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (0069-1085-30) / 1 KIT in 1 BLISTER PACK (0069-1085-06) * 4 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-01) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-3085-01) ",
"NDC11Code": "00069-1085-30",
"ProductNDC": "0069-1085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paxlovid",
"NonProprietaryName": "Nirmatrelvir And Ritonavir",
"DosageFormName": "KIT",
"StartMarketingDate": "20211222",
"MarketingCategoryName": "EMERGENCY USE AUTHORIZATION",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20211222",
"SamplePackage": "N",
"IndicationAndUsage": "The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.",
"Description": "PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor."
},
{
"NDCCode": "0069-1101-20",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (0069-1101-20) / 1 KIT in 1 BLISTER PACK (0069-1101-04) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-02) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-3085-01) ",
"NDC11Code": "00069-1101-20",
"ProductNDC": "0069-1101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paxlovid",
"NonProprietaryName": "Nirmatrelvir And Ritonavir",
"DosageFormName": "KIT",
"StartMarketingDate": "20220317",
"MarketingCategoryName": "EMERGENCY USE AUTHORIZATION",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220317",
"SamplePackage": "N",
"IndicationAndUsage": "The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.",
"Description": "PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor."
},
{
"NDCCode": "0069-1109-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1109-02) / 25 mL in 1 BOTTLE, GLASS (0069-1109-01) ",
"NDC11Code": "00069-1109-02",
"ProductNDC": "0069-1109",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "0069-1198-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-1198-30) ",
"NDC11Code": "00069-1198-30",
"ProductNDC": "0069-1198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vizimpro",
"NonProprietaryName": "Dacomitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181004",
"EndMarketingDate": "20280930",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211288",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DACOMITINIB",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181004",
"EndMarketingDatePackage": "20280930",
"SamplePackage": "N",
"IndicationAndUsage": "VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].",
"Description": "Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake."
},
{
"NDCCode": "0069-1224-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1224-02) / 50 mL in 1 BOTTLE, GLASS (0069-1224-01) ",
"NDC11Code": "00069-1224-02",
"ProductNDC": "0069-1224",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "0069-1312-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1312-02) / 100 mL in 1 BOTTLE, GLASS (0069-1312-01) ",
"NDC11Code": "00069-1312-02",
"ProductNDC": "0069-1312",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0069-3140-19</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-3140-19) / 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-3140-19</NDC11Code>
<ProductNDC>0069-3140</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050710</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>0069-2465-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0069-2465-01) / .5 mL in 1 VIAL (0069-2465-19) </PackageDescription>
<NDC11Code>00069-2465-01</NDC11Code>
<ProductNDC>0069-2465</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Abrysvo</ProprietaryName>
<NonProprietaryName>Respiratory Syncytial Virus Vaccine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20240730</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125769</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>RECOMBINANT STABILIZED RSV A PREFUSION F ANTIGEN; RECOMBINANT STABILIZED RSV B PREFUSION F ANTIGEN</SubstanceName>
<StrengthNumber>.06; .06</StrengthNumber>
<StrengthUnit>mg/.5mL; mg/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRYSVO is a vaccine indicated for: 1 Active immunization of pregnant individuals at 32 through 36 weeks gestational age for the prevention of lower respiratory tract disease (LRTD) and severe LRTD caused by respiratory syncytial virus (RSV) in infants from birth through 6 months of age. (1.1), 2 Active immunization for the prevention of LRTD caused by RSV in individuals 60 years of age and older. (1.2), 3 Active immunization for the prevention of LRTD caused by RSV in individuals 18 through 59 years of age who are at increased risk for LRTD caused by RSV. (1.3).</IndicationAndUsage>
<Description>ABRYSVO (Respiratory Syncytial Virus Vaccine) is a sterile solution for intramuscular use. The vaccine is supplied as a vial of Lyophilized Antigen Component that is reconstituted at the time of use with a Sterile Water Diluent Component. The antigen component contains recombinant RSV preF A and RSV preF B. The RSV preF A and RSV preF B recombinant proteins are expressed in genetically engineered Chinese Hamster Ovary cell lines grown in suspension culture using chemically-defined media, without antibiotics or animal-derived components. The recombinant proteins are purified through a series of column chromatography and filtration steps followed by formulation, filling into vials, and lyophilization. After reconstitution, a single dose of ABRYSVO is formulated to contain 120 mcg of RSV stabilized prefusion F proteins (60 mcg RSV preF A and 60 mcg RSV preF B) per 0.5 mL. ABRYSVO also contains the following buffer ingredients: 0.11 mg tromethamine, 1.04 mg tromethamine hydrochloride, 11.3 mg sucrose, 22.5 mg mannitol, 0.08 mg polysorbate 80, and 1.1 mg sodium chloride per 0.5 mL. ABRYSVO is a sterile, clear, and colorless solution. ABRYSVO contains no preservatives. Each dose may also contain residual amounts of host cell proteins (≤0.1% w/w) and DNA (<0.4 ng/mg of total protein) from the manufacturing process. The Act-O-Vial stoppers, vial stoppers and tip cap and rubber plunger of the prefilled syringe are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>0069-2465-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0069-2465-10) / .5 mL in 1 VIAL (0069-2465-19) </PackageDescription>
<NDC11Code>00069-2465-10</NDC11Code>
<ProductNDC>0069-2465</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Abrysvo</ProprietaryName>
<NonProprietaryName>Respiratory Syncytial Virus Vaccine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20240730</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125769</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>RECOMBINANT STABILIZED RSV A PREFUSION F ANTIGEN; RECOMBINANT STABILIZED RSV B PREFUSION F ANTIGEN</SubstanceName>
<StrengthNumber>.06; .06</StrengthNumber>
<StrengthUnit>mg/.5mL; mg/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRYSVO is a vaccine indicated for: 1 Active immunization of pregnant individuals at 32 through 36 weeks gestational age for the prevention of lower respiratory tract disease (LRTD) and severe LRTD caused by respiratory syncytial virus (RSV) in infants from birth through 6 months of age. (1.1), 2 Active immunization for the prevention of LRTD caused by RSV in individuals 60 years of age and older. (1.2), 3 Active immunization for the prevention of LRTD caused by RSV in individuals 18 through 59 years of age who are at increased risk for LRTD caused by RSV. (1.3).</IndicationAndUsage>
<Description>ABRYSVO (Respiratory Syncytial Virus Vaccine) is a sterile solution for intramuscular use. The vaccine is supplied as a vial of Lyophilized Antigen Component that is reconstituted at the time of use with a Sterile Water Diluent Component. The antigen component contains recombinant RSV preF A and RSV preF B. The RSV preF A and RSV preF B recombinant proteins are expressed in genetically engineered Chinese Hamster Ovary cell lines grown in suspension culture using chemically-defined media, without antibiotics or animal-derived components. The recombinant proteins are purified through a series of column chromatography and filtration steps followed by formulation, filling into vials, and lyophilization. After reconstitution, a single dose of ABRYSVO is formulated to contain 120 mcg of RSV stabilized prefusion F proteins (60 mcg RSV preF A and 60 mcg RSV preF B) per 0.5 mL. ABRYSVO also contains the following buffer ingredients: 0.11 mg tromethamine, 1.04 mg tromethamine hydrochloride, 11.3 mg sucrose, 22.5 mg mannitol, 0.08 mg polysorbate 80, and 1.1 mg sodium chloride per 0.5 mL. ABRYSVO is a sterile, clear, and colorless solution. ABRYSVO contains no preservatives. Each dose may also contain residual amounts of host cell proteins (≤0.1% w/w) and DNA (<0.4 ng/mg of total protein) from the manufacturing process. The Act-O-Vial stoppers, vial stoppers and tip cap and rubber plunger of the prefilled syringe are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>0069-3110-19</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-3110-19) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-3110-19</NDC11Code>
<ProductNDC>0069-3110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050710</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>0069-3120-19</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-3120-19) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-3120-19</NDC11Code>
<ProductNDC>0069-3120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050710</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>0069-3130-19</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-3130-19) / 22.5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-3130-19</NDC11Code>
<ProductNDC>0069-3130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050710</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX is a macrolide antibacterial drug indicated for treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below: 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (6 months of age and older) (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (6 months of age and older) (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (2 years of age and older) (1.1, 1.2).</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets, USP and azithromycin for oral suspension, USP) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3(dimethylamino-)-β-D-xylohexopyranosyl-]oxy]-1-oxa-6-azacyclopentadecan-15 one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a -methyl substituted- nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX tablets (azithromycin tablets, USP) is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: D&C Red #30 aluminum lake, dibasic calcium phosphate anhydrous, hypromellose, lactose, magnesium stearate, pregelatinized starch, sodium croscarmellose, sodium lauryl sulfate, titanium dioxide, and triacetin. ZITHROMAX for oral suspension (azithromycin for oral suspension, USP) is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: FD&C Red#40, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, xanthan gum, and spray dried artificial banana, cherry, and creme de vanilla flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>0069-4395-19</NDCCode>
<PackageDescription>100 mL in 1 BAG (0069-4395-19)</PackageDescription>
<NDC11Code>00069-4395-19</NDC11Code>
<ProductNDC>0069-4395</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078024</ApplicationNumber>
<LabelerName>Pfizer Labs, Division of Pfizer Inc</LabelerName>
<SubstanceName>CIPROFLOXACIN</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-02</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49349-069-19</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (49349-069-19)</PackageDescription>
<NDC11Code>49349-0069-19</NDC11Code>
<ProductNDC>49349-069</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076059</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0069-0197-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-0197-30) </PackageDescription>
<NDC11Code>00069-0197-30</NDC11Code>
<ProductNDC>0069-0197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vizimpro</ProprietaryName>
<NonProprietaryName>Dacomitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181004</StartMarketingDate>
<EndMarketingDate>20291231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211288</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DACOMITINIB</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181004</StartMarketingDatePackage>
<EndMarketingDatePackage>20291231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0069-0297-02</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0069-0297-02) / .25 mL in 1 SYRINGE (0069-0297-01) </PackageDescription>
<NDC11Code>00069-0297-02</NDC11Code>
<ProductNDC>0069-0297</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Ticovac</ProprietaryName>
<NonProprietaryName>Tick-borne Encephalitis Vaccine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125740</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>ug/.25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.</IndicationAndUsage>
<Description>TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0297-10</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0297-10) / .25 mL in 1 SYRINGE (0069-0297-01) </PackageDescription>
<NDC11Code>00069-0297-10</NDC11Code>
<ProductNDC>0069-0297</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Ticovac</ProprietaryName>
<NonProprietaryName>Tick-borne Encephalitis Vaccine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125740</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>ug/.25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.</IndicationAndUsage>
<Description>TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0324-01</NDCCode>
<PackageDescription>1 CARTON in 1 CARTON (0069-0324-01) / 1 SYRINGE in 1 CARTON / .6 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00069-0324-01</NDC11Code>
<ProductNDC>0069-0324</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nyvepria</ProprietaryName>
<NonProprietaryName>Pegfilgrastim-apgf</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20201215</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761111</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>PEGFILGRASTIM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/.6mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Patients with Cancer Receiving Myelosuppressive Chemotherapy. NYVEPRIA is indicated in adults and pediatric patients aged newborn and older to decrease the incidence of infection, as manifested by febrile neutropenia, in patients with non-myeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a clinically significant incidence of febrile neutropenia [see Dosage and Administration (2.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Pegfilgrastim-apgf is a covalent conjugate of recombinant methionyl human G-CSF and monomethoxypolyethylene glycol. Recombinant methionyl human G-CSF is a water-soluble 175 amino acid protein with a molecular weight of approximately 19 kilodaltons (kD). Recombinant methionyl human G-CSF is obtained from the bacterial fermentation of a strain of E. coli transformed with a genetically engineered plasmid containing the human G-CSF gene. To produce pegfilgrastim-apgf, a 20 kD monomethoxypolyethylene glycol molecule is covalently bound to the N-terminal methionyl residue of recombinant methionyl human G-CSF. The average molecular weight of pegfilgrastim-apgf is approximately 39 kD. NYVEPRIA for manual subcutaneous injection is supplied in 0.6 mL prefilled syringes. The prefilled syringe does not bear graduation marks and is designed to deliver the entire contents of the syringe (6 mg/0.6 mL). The delivered 0.6 mL dose from the prefilled syringe for manual subcutaneous injection contains 6 mg pegfilgrastim-apgf (based on protein weight) in a sterile, clear, colorless, preservative-free solution (pH 4.0) containing acetate (0.35 mg), polysorbate 20 (0.02 mg), sodium (0.01 mg), and sorbitol (30 mg) in Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>0069-0328-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0069-0328-01) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE (0069-0317-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>00069-0328-01</NDC11Code>
<ProductNDC>0069-0328</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231018</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn's Disease (CD) (1.5): treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients.Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 8 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 9 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>0069-0334-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (0069-0334-28) </PackageDescription>
<NDC11Code>00069-0334-28</NDC11Code>
<ProductNDC>0069-0334</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Litfulo</ProprietaryName>
<NonProprietaryName>Ritlecitinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230706</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215830</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>RITLECITINIB TOSYLATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Janus Kinase 3 Inhibitors [MoA], Kinase Inhibitor [EPC], Tyrosine Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LITFULO is a kinase inhibitor indicated for the treatment of severe alopecia areata in adults and adolescents 12 years and older. Limitations of Use: Not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, cyclosporine or other potent immunosuppressants.</IndicationAndUsage>
<Description>LITFULO (ritlecitinib) capsules are formulated with ritlecitinib tosylate, a kinase inhibitor. Ritlecitinib tosylate is a white to off white to pale pink solid which is freely soluble in water. The chemical name is 1-{(2S,5R)-2-Methyl-5-[(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino]piperidin-1-yl}prop-2-en-1-one 4-methylbenzene-1-sulfonic acid. The molecular formula for ritlecitinib tosylate is C22H27N5O4S. The molecular weight is 457.55 g/mol and its structural formula is. LITFULO is supplied for oral administration as a 50 mg immediate-release capsule. Each capsule contains 50 mg ritlecitinib (equivalent to 80.13 mg ritlecitinib tosylate) and the following inactive ingredients: crospovidone, glyceryl dibehenate, lactose monohydrate, microcrystalline cellulose, and hypromellose (HPMC) capsule shells. The yellow/blue, opaque capsule shells contain Brilliant blue FCF – FD&C Blue, hypromellose, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0345-30</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (0069-0345-30) / 1 KIT in 1 BLISTER PACK (0069-0345-06) * 4 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-01) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-1345-01) </PackageDescription>
<NDC11Code>00069-0345-30</NDC11Code>
<ProductNDC>0069-0345</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paxlovid</ProprietaryName>
<NonProprietaryName>Nirmatrelvir And Ritonavir</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220418</StartMarketingDate>
<MarketingCategoryName>EMERGENCY USE AUTHORIZATION</MarketingCategoryName>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220418</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor.</Description>
</NDC>
<NDC>
<NDCCode>0069-0411-02</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0069-0411-02) / .5 mL in 1 SYRINGE (0069-0411-01) </PackageDescription>
<NDC11Code>00069-0411-02</NDC11Code>
<ProductNDC>0069-0411</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Ticovac</ProprietaryName>
<NonProprietaryName>Tick-borne Encephalitis Vaccine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20211025</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125740</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>2.4</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.</IndicationAndUsage>
<Description>TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0411-10</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0411-10) / .5 mL in 1 SYRINGE (0069-0411-01) </PackageDescription>
<NDC11Code>00069-0411-10</NDC11Code>
<ProductNDC>0069-0411</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Ticovac</ProprietaryName>
<NonProprietaryName>Tick-borne Encephalitis Vaccine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20211025</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125740</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>TICK-BORNE ENCEPHALITIS PURIFIED ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>2.4</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TICOVAC is indicated for active immunization to prevent tick-borne encephalitis (TBE). TICOVAC is approved for use in individuals 1 year of age and older.</IndicationAndUsage>
<Description>TICOVAC (tick-borne encephalitis vaccine) is a sterile, off-white, homogenous, opalescent suspension for intramuscular injection. TICOVAC is prepared from tick-borne encephalitis (TBE) virus propagated in chick embryo fibroblast (CEF) cells. The harvested virus suspension is inactivated by treatment with formaldehyde, purified by sucrose gradient centrifugation and adsorbed onto aluminum hydroxide. TICOVAC is available in a 0.5 mL adult presentation and a 0.25 mL pediatric presentation. Each 0.5 mL dose is formulated to contain 2.4 microgram (µg) TBE inactivated virus, 0.5 mg human serum albumin, 0.35 mg aluminum hydroxide, 3.45 mg sodium chloride, 0.22 mg dibasic sodium phosphate, and 0.045 mg of monobasic potassium phosphate. From the manufacturing process, each 0.5 mL may also contain formaldehyde (≤5 µg), sucrose (≤15 mg), protamine sulfate (≤0.5 µg), and trace amounts of chick protein and DNA from CEF cells, neomycin and gentamicin. The 0.25 mL dose of TICOVAC contains the same components as the 0.5 mL dose in half of the quantities. TICOVAC is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0505-02</NDCCode>
<PackageDescription>1 CARTRIDGE in 1 CARTON (0069-0505-02) / 1.2 mL in 1 CARTRIDGE (0069-0505-01) </PackageDescription>
<NDC11Code>00069-0505-02</NDC11Code>
<ProductNDC>0069-0505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ngenla</ProprietaryName>
<NonProprietaryName>Somatrogon-ghla</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761184</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SOMATROGON</SubstanceName>
<StrengthNumber>24</StrengthNumber>
<StrengthUnit>mg/1.2mL</StrengthUnit>
<Pharm_Classes>11-beta Hydroxysteroid Dehydrogenase Type 1 Inhibitors [MoA], Human Growth Hormone [CS], Recombinant Human Growth Hormone [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NGENLA is indicated for the treatment of pediatric patients aged 3 years and older who have growth failure due to an inadequate secretion of endogenous growth hormone.</IndicationAndUsage>
<Description>Somatrogon-ghla, a human growth hormone analog, is a fusion protein produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. It is comprised of the amino acid sequence of human growth hormone (hGH) with one copy of the C-terminal peptide (CTP) from the beta chain of human chorionic gonadotropin (hCG) at the N-terminus and 2 copies of CTP (in tandem) at the C-terminus. Somatrogon-ghla has an approximate molecular weight of 40 KDa. NGENLA (somatrogon-ghla) injection is a sterile, clear and colorless to slightly light yellow solution for subcutaneous use supplied in a 24 mg/1.2 mL (20 mg/mL) or 60 mg/1.2 mL (50 mg/mL) single-patient-use prefilled pen. Each 1.2 mL of solution contains either 24 mg or 60 mg of somatrogon-ghla, and the inactive ingredients citric acid monohydrate (0.3 mg), histidine (1.9 mg), metacresol (4 mg, as a preservative), poloxamer 188 (2 mg), sodium chloride (10 mg) and sodium citrate (2.8 mg) in water for injection. NGENLA has a pH of approximately 6.6.</Description>
</NDC>
<NDC>
<NDCCode>0069-0520-02</NDCCode>
<PackageDescription>1 CARTRIDGE in 1 CARTON (0069-0520-02) / 1.2 mL in 1 CARTRIDGE (0069-0520-01) </PackageDescription>
<NDC11Code>00069-0520-02</NDC11Code>
<ProductNDC>0069-0520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ngenla</ProprietaryName>
<NonProprietaryName>Somatrogon-ghla</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761184</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>SOMATROGON</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1.2mL</StrengthUnit>
<Pharm_Classes>11-beta Hydroxysteroid Dehydrogenase Type 1 Inhibitors [MoA], Human Growth Hormone [CS], Recombinant Human Growth Hormone [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NGENLA is indicated for the treatment of pediatric patients aged 3 years and older who have growth failure due to an inadequate secretion of endogenous growth hormone.</IndicationAndUsage>
<Description>Somatrogon-ghla, a human growth hormone analog, is a fusion protein produced in Chinese Hamster Ovary (CHO) cells by recombinant DNA technology. It is comprised of the amino acid sequence of human growth hormone (hGH) with one copy of the C-terminal peptide (CTP) from the beta chain of human chorionic gonadotropin (hCG) at the N-terminus and 2 copies of CTP (in tandem) at the C-terminus. Somatrogon-ghla has an approximate molecular weight of 40 KDa. NGENLA (somatrogon-ghla) injection is a sterile, clear and colorless to slightly light yellow solution for subcutaneous use supplied in a 24 mg/1.2 mL (20 mg/mL) or 60 mg/1.2 mL (50 mg/mL) single-patient-use prefilled pen. Each 1.2 mL of solution contains either 24 mg or 60 mg of somatrogon-ghla, and the inactive ingredients citric acid monohydrate (0.3 mg), histidine (1.9 mg), metacresol (4 mg, as a preservative), poloxamer 188 (2 mg), sodium chloride (10 mg) and sodium citrate (2.8 mg) in water for injection. NGENLA has a pH of approximately 6.6.</Description>
</NDC>
<NDC>
<NDCCode>0069-0521-11</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0069-0521-11) / 1 KIT in 1 BLISTER PACK * 6 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-06) * 5 TABLET, FILM COATED in 1 BLISTER PACK (0069-1735-05) </PackageDescription>
<NDC11Code>00069-0521-11</NDC11Code>
<ProductNDC>0069-0521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paxlovid</ProprietaryName>
<NonProprietaryName>Nirmatrelvir And Ritonavir</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250415</StartMarketingDate>
<EndMarketingDate>20260831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217188</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<EndMarketingDatePackage>20260831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PAXLOVID is indicated for the treatment of mild-to-moderate coronavirus disease 2019 (COVID-19) in adults who are at high risk for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor.</Description>
</NDC>
<NDC>
<NDCCode>0069-0600-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0069-0600-01) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) </PackageDescription>
<NDC11Code>00069-0600-01</NDC11Code>
<ProductNDC>0069-0600</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Penbraya</ProprietaryName>
<NonProprietaryName>Meningococcal Groups A, B, C, W, And Y Vaccine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231127</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125770</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.</IndicationAndUsage>
<Description>PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0600-05</NDCCode>
<PackageDescription>5 KIT in 1 CARTON (0069-0600-05) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) </PackageDescription>
<NDC11Code>00069-0600-05</NDC11Code>
<ProductNDC>0069-0600</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Penbraya</ProprietaryName>
<NonProprietaryName>Meningococcal Groups A, B, C, W, And Y Vaccine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231127</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125770</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.</IndicationAndUsage>
<Description>PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-0600-10</NDCCode>
<PackageDescription>10 KIT in 1 CARTON (0069-0600-10) / 1 KIT in 1 KIT (0069-0600-99) * .5 mL in 1 SYRINGE (0069-0332-01) * .5 mL in 1 VIAL, GLASS (0069-0271-01) </PackageDescription>
<NDC11Code>00069-0600-10</NDC11Code>
<ProductNDC>0069-0600</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Penbraya</ProprietaryName>
<NonProprietaryName>Meningococcal Groups A, B, C, W, And Y Vaccine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231127</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125770</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PENBRAYA is indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y. PENBRAYA is approved for use in individuals 10 through 25 years of age.</IndicationAndUsage>
<Description>PENBRAYA (Meningococcal Groups A, B, C, W, and Y Vaccine) is a suspension for intramuscular injection. PENBRAYA is supplied as a sterile Lyophilized MenACWY Component to be reconstituted with the sterile MenB Component. The Lyophilized MenACWY Component consists of N. meningitidis serogroups A, C, W, and Y polysaccharides individually conjugated to TT. The polysaccharide for each group is grown in media containing dextrose, salt, and yeast extract, then purified by precipitation and filtration. The TT is produced by fermentation of Clostridium tetani in dextrose, salts, and tryptone N1 peptone followed by formalin detoxification, then purified by a series of physicochemical steps. The serogroups A and C polysaccharides are individually microfluidized, activated with 1-cyano-4(dimethylamino)-pyridinium tetrafluoroborate (CDAP), derivatized with adipic acid dihydrazide (ADH), and then conjugated with TT in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide) (EDAC). The serogroups W and Y polysaccharides are individually microfluidized, activated with CDAP, and then conjugated with TT. The conjugates are purified by a series of physicochemical steps then sterile filtered. Trometamol/sucrose buffer is added, and the MenACWY-TT solution is lyophilized. The MenB Component is a sterile suspension composed of 2 recombinant lipidated factor H binding protein (fHbp) variants from N. meningitidis serogroup B, 1 from fHbp subfamily A and 1 from fHbp subfamily B (A05 and B01, respectively). The proteins are individually produced in Escherichia coli. Production strains are grown to a specific density in chemically defined fermentation growth media without antibiotics or animal-derived components. The recombinant proteins are extracted from the production strains and purified through a series of column chromatography steps. Polysorbate 80 (PS80) is added and is present in the MenB Component. Each approximately 0.5 mL dose of PENBRAYA contains N. meningitidis serogroup A, C, W, and Y polysaccharide (5 mcg each; 20 mcg total) conjugated to tetanus toxoid (44 mcg tetanus toxoid), 2 recombinant lipidated factor H binding protein variants from N. meningitidis serogroup B (60 mcg each; total of 120 mcg protein), L-histidine (0.78 mg) , trometamol (0.097 mg), sucrose (28 mg), aluminum phosphate (0.25 mg aluminum), sodium chloride (4.65 mg), and PS80 80 (0.018 mg) at pH 6.0. PENBRAYA does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0069-1011-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1011-02) / 10 mL in 1 BOTTLE, GLASS (0069-1011-01) </PackageDescription>
<NDC11Code>00069-1011-02</NDC11Code>
<ProductNDC>0069-1011</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>0069-1085-30</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (0069-1085-30) / 1 KIT in 1 BLISTER PACK (0069-1085-06) * 4 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-01) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-3085-01) </PackageDescription>
<NDC11Code>00069-1085-30</NDC11Code>
<ProductNDC>0069-1085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paxlovid</ProprietaryName>
<NonProprietaryName>Nirmatrelvir And Ritonavir</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20211222</StartMarketingDate>
<MarketingCategoryName>EMERGENCY USE AUTHORIZATION</MarketingCategoryName>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor.</Description>
</NDC>
<NDC>
<NDCCode>0069-1101-20</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (0069-1101-20) / 1 KIT in 1 BLISTER PACK (0069-1101-04) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-2085-02) * 2 TABLET, FILM COATED in 1 BLISTER PACK (0069-3085-01) </PackageDescription>
<NDC11Code>00069-1101-20</NDC11Code>
<ProductNDC>0069-1101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paxlovid</ProprietaryName>
<NonProprietaryName>Nirmatrelvir And Ritonavir</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220317</StartMarketingDate>
<MarketingCategoryName>EMERGENCY USE AUTHORIZATION</MarketingCategoryName>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The U.S. Food and Drug Administration (FDA) has issued an Emergency Use Authorization (EUA) for the emergency use of PAXLOVID for the treatment of adults and pediatric patients (12 years of age and older weighing at least 40 kg) with mild-to-moderate coronavirus disease 2019 (COVID-19) and who are at high riskDetermining whether a patient is at high risk for progression to severe COVID-19, including hospitalization or death, is based on the provider’s assessment of the individual patient being considered for treatment of COVID-19 and that patient’s medical history. For information on medical conditions and factors associated with increased risk for progression to severe COVID-19, see the Centers for Disease Control and Prevention (CDC) website: https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-care/underlyingconditions.html. for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>PAXLOVID is nirmatrelvir tablets co-packaged with ritonavir tablets. Nirmatrelvir is a SARS-CoV-2 main protease (Mpro) inhibitor, and ritonavir is an HIV-1 protease inhibitor and CYP3A inhibitor.</Description>
</NDC>
<NDC>
<NDCCode>0069-1109-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1109-02) / 25 mL in 1 BOTTLE, GLASS (0069-1109-01) </PackageDescription>
<NDC11Code>00069-1109-02</NDC11Code>
<ProductNDC>0069-1109</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>0069-1198-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0069-1198-30) </PackageDescription>
<NDC11Code>00069-1198-30</NDC11Code>
<ProductNDC>0069-1198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vizimpro</ProprietaryName>
<NonProprietaryName>Dacomitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181004</StartMarketingDate>
<EndMarketingDate>20280930</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211288</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DACOMITINIB</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181004</StartMarketingDatePackage>
<EndMarketingDatePackage>20280930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIZIMPRO is indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) with epidermal growth factor receptor (EGFR) exon 19 deletion or exon 21 L858R substitution mutations as detected by an FDA-approved test [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Dacomitinib is an oral kinase inhibitor with a molecular formula of C24H25ClFN5O2 ∙ H2O and a molecular weight of 487.95 Daltons. The chemical name is: (2E)-N-{4-[(3-Chloro-4-fluorophenyl)amino]-7-methoxyquinazolin-6-yl}-4-(piperidin-1-yl)but-2-enamide monohydrate and its structural formula is. Dacomitinib is a white to pale yellow powder. VIZIMPRO tablets contain 45, 30, or 15 mg of dacomitinib with the following inactive ingredients in the tablet core; lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, and magnesium stearate. The film coating consists of Opadry II® Blue 85F30716 containing: Polyvinyl alcohol – partially hydrolyzed, Talc, Titanium dioxide, Macrogol/PEG 3350, and FD&C Blue #2/Indigo Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0069-1224-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1224-02) / 50 mL in 1 BOTTLE, GLASS (0069-1224-01) </PackageDescription>
<NDC11Code>00069-1224-02</NDC11Code>
<ProductNDC>0069-1224</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>0069-1312-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1312-02) / 100 mL in 1 BOTTLE, GLASS (0069-1312-01) </PackageDescription>
<NDC11Code>00069-1312-02</NDC11Code>
<ProductNDC>0069-1312</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
</NDCList>