RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>0093-3750-63</NDCCode>
    <PackageDescription>14 POUCH in 1 CARTON (0093-3750-63)  / 4 AMPULE in 1 POUCH / 4 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>00093-3750-63</NDC11Code>
    <ProductNDC>0093-3750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tobramycin</ProprietaryName>
    <NonProprietaryName>Tobramycin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20200915</StartMarketingDate>
    <EndMarketingDate>20260630</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210915</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TOBRAMYCIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/4mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20200915</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260630</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tobramycin inhalation solution is indicated for the management of cystic fibrosis patients with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of six years, patients with FEV1 less than 40% or greater than 80% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Tobramycin inhalation solution, USP is a sterile, clear, colorless to yellow, non-pyrogenic, aqueous solution with pH and salinity adjusted. Tobramycin inhalation solution, USP is administered by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.51. Tobramycin, USP is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin, USP is. Each single-dose 4 mL ampule of tobramycin inhalation solution, USP contains one 300 mg dose of tobramycin, USP with sodium chloride and trisodium citrate dihydrate in sterile water for injection. Sulfuric acid and sodium hydroxide are used, as needed, to adjust the pH to 5.0. Nitrogen is used for sparging and filling. The formulation contains no preservatives.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3750-28</NDCCode>
    <PackageDescription>7 POUCH in 1 CARTON (0093-3750-28)  / 4 AMPULE in 1 POUCH / 4 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>00093-3750-28</NDC11Code>
    <ProductNDC>0093-3750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tobramycin</ProprietaryName>
    <NonProprietaryName>Tobramycin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20200915</StartMarketingDate>
    <EndMarketingDate>20260630</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210915</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TOBRAMYCIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/4mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20200915</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260630</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tobramycin inhalation solution is indicated for the management of cystic fibrosis patients with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of six years, patients with FEV1 less than 40% or greater than 80% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Tobramycin inhalation solution, USP is a sterile, clear, colorless to yellow, non-pyrogenic, aqueous solution with pH and salinity adjusted. Tobramycin inhalation solution, USP is administered by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.51. Tobramycin, USP is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin, USP is. Each single-dose 4 mL ampule of tobramycin inhalation solution, USP contains one 300 mg dose of tobramycin, USP with sodium chloride and trisodium citrate dihydrate in sterile water for injection. Sulfuric acid and sodium hydroxide are used, as needed, to adjust the pH to 5.0. Nitrogen is used for sparging and filling. The formulation contains no preservatives.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-4085-63</NDCCode>
    <PackageDescription>56 AMPULE in 1 CARTON (0093-4085-63)  / 5 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>00093-4085-63</NDC11Code>
    <ProductNDC>0093-4085</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tobramycin</ProprietaryName>
    <NonProprietaryName>Tobramycin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20131119</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091589</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TOBRAMYCIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20131119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tobramycin inhalation solution is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) &lt;25% or &gt;75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Tobramycin Inhalation Solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin, USP is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin, USP is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin, USP is. Each single-dose 5 mL ampule contains 300 mg tobramycin, USP and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-7227-63</NDCCode>
    <PackageDescription>56 CAPSULE in 1 BOTTLE (0093-7227-63)</PackageDescription>
    <NDC11Code>00093-7227-63</NDC11Code>
    <ProductNDC>0093-7227</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ribavirin</ProprietaryName>
    <NonProprietaryName>Ribavirin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20041004</StartMarketingDate>
    <EndMarketingDate>20151130</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076277</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA Inc</LabelerName>
    <SubstanceName>RIBAVIRIN</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nucleoside Analog [Chemical/Ingredient],Nucleoside Analog Antiviral [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2015-12-04</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>43744-093-63</NDCCode>
    <PackageDescription>3000 g in 1 DRUM (43744-093-63)</PackageDescription>
    <NDC11Code>43744-0093-63</NDC11Code>
    <ProductNDC>43744-093</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Bleomycin Sulfate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20110707</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>BLEOMYCIN SULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0093-1010-42</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-1010-42)  / 22 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-1010-42</NDC11Code>
    <ProductNDC>0093-1010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mupirocin</ProprietaryName>
    <NonProprietaryName>Mupirocin</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20031107</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065085</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>MUPIROCIN</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20031107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mupirocin ointment is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
    <Description>Mupirocin ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is (E)-(2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The chemical structure is. C26H44O9 M.W. 500.63. Each gram of mupirocin ointment USP, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment, N.F.) consisting of polyethylene glycol 400 and polyethylene glycol 3350.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-4145-56</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (0093-4145-56)  &gt; 5 VIAL, SINGLE-DOSE in 1 POUCH (0093-4145-45)  &gt; 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00093-4145-56</NDC11Code>
    <ProductNDC>0093-4145</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levalbuterol</ProprietaryName>
    <NonProprietaryName>Levalbuterol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20130429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090297</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.31</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
    <Description>Levalbuterol Inhalation Solution USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 188°C and is soluble in water and slightly soluble in ethanol. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg (0.0103%) of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg (0.021%) of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg (0.042%) of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, 0.33 mg of edetate disodium dihydrate, 6 mg of trisodium citrate dihydrate and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-4146-56</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (0093-4146-56)  &gt; 5 VIAL, SINGLE-DOSE in 1 POUCH (0093-4146-45)  &gt; 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00093-4146-56</NDC11Code>
    <ProductNDC>0093-4146</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levalbuterol</ProprietaryName>
    <NonProprietaryName>Levalbuterol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20130429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090297</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.63</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
    <Description>Levalbuterol Inhalation Solution USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 188°C and is soluble in water and slightly soluble in ethanol. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg (0.0103%) of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg (0.021%) of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg (0.042%) of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, 0.33 mg of edetate disodium dihydrate, 6 mg of trisodium citrate dihydrate and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-4146-64</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (0093-4146-64)  &gt; 4 VIAL, SINGLE-DOSE in 1 POUCH (0093-4146-04)  &gt; 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00093-4146-64</NDC11Code>
    <ProductNDC>0093-4146</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levalbuterol</ProprietaryName>
    <NonProprietaryName>Levalbuterol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20130429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090297</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.63</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130429</StartMarketingDatePackage>
    <EndMarketingDatePackage>20191231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0093-4148-56</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (0093-4148-56)  &gt; 5 VIAL, SINGLE-DOSE in 1 POUCH (0093-4148-45)  &gt; 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00093-4148-56</NDC11Code>
    <ProductNDC>0093-4148</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levalbuterol</ProprietaryName>
    <NonProprietaryName>Levalbuterol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20130429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090297</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
    <Description>Levalbuterol Inhalation Solution USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 188°C and is soluble in water and slightly soluble in ethanol. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg (0.0103%) of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg (0.021%) of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg (0.042%) of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, 0.33 mg of edetate disodium dihydrate, 6 mg of trisodium citrate dihydrate and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-7455-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-7455-01) </PackageDescription>
    <NDC11Code>00093-7455-01</NDC11Code>
    <ProductNDC>0093-7455</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide And Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Glipizide And Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051028</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077270</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.5; 250</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051028</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide and metformin hydrochloride tablets USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Glipizide and metformin hydrochloride tablets, USP contain 2 oral antihyperglycemic drugs used in the management of type 2 diabetes, glipizide, USP and metformin hydrochloride, USP. Glipizide, USP is an oral antihyperglycemic drug of the sulfonylurea class. The chemical name for glipizide, USP is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl]phenyl]sulfonyl]urea. Glipizide, USP is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. The structural formula is represented below. C21H27N5O4S M.W. 445.55. Metformin hydrochloride, USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride, USP (N,N-dimethylimidodicarbonimidic diamide monohydrochloride) is not chemically or pharmacologically related to sulfonylureas, thiazolidinediones, or α-glucosidase inhibitors. It is a white to off-white crystalline compound. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. The structural formula is as shown. C4H12ClN5 M.W. 165.63. Glipizide and metformin hydrochloride tablets, USP for oral administration contain 2.5 mg glipizide, USP with 250 mg metformin hydrochloride, USP, 2.5 mg glipizide, USP with 500 mg metformin hydrochloride, USP, and 5 mg glipizide, USP with 500 mg metformin hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, talc, and titanium dioxide. Additionally, 2.5 mg/250 mg and 5 mg/500 mg tablets contain iron oxide black, iron oxide red, and iron oxide yellow. The tablets are film-coated, which provides color differentiation.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-7456-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-7456-01) </PackageDescription>
    <NDC11Code>00093-7456-01</NDC11Code>
    <ProductNDC>0093-7456</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide And Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Glipizide And Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051028</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077270</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.5; 500</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051028</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide and metformin hydrochloride tablets USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Glipizide and metformin hydrochloride tablets, USP contain 2 oral antihyperglycemic drugs used in the management of type 2 diabetes, glipizide, USP and metformin hydrochloride, USP. Glipizide, USP is an oral antihyperglycemic drug of the sulfonylurea class. The chemical name for glipizide, USP is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl]phenyl]sulfonyl]urea. Glipizide, USP is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. The structural formula is represented below. C21H27N5O4S M.W. 445.55. Metformin hydrochloride, USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride, USP (N,N-dimethylimidodicarbonimidic diamide monohydrochloride) is not chemically or pharmacologically related to sulfonylureas, thiazolidinediones, or α-glucosidase inhibitors. It is a white to off-white crystalline compound. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. The structural formula is as shown. C4H12ClN5 M.W. 165.63. Glipizide and metformin hydrochloride tablets, USP for oral administration contain 2.5 mg glipizide, USP with 250 mg metformin hydrochloride, USP, 2.5 mg glipizide, USP with 500 mg metformin hydrochloride, USP, and 5 mg glipizide, USP with 500 mg metformin hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, talc, and titanium dioxide. Additionally, 2.5 mg/250 mg and 5 mg/500 mg tablets contain iron oxide black, iron oxide red, and iron oxide yellow. The tablets are film-coated, which provides color differentiation.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-7457-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-7457-01) </PackageDescription>
    <NDC11Code>00093-7457-01</NDC11Code>
    <ProductNDC>0093-7457</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide And Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Glipizide And Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051028</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077270</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5; 500</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051028</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide and metformin hydrochloride tablets USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Glipizide and metformin hydrochloride tablets, USP contain 2 oral antihyperglycemic drugs used in the management of type 2 diabetes, glipizide, USP and metformin hydrochloride, USP. Glipizide, USP is an oral antihyperglycemic drug of the sulfonylurea class. The chemical name for glipizide, USP is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl]phenyl]sulfonyl]urea. Glipizide, USP is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. The structural formula is represented below. C21H27N5O4S M.W. 445.55. Metformin hydrochloride, USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride, USP (N,N-dimethylimidodicarbonimidic diamide monohydrochloride) is not chemically or pharmacologically related to sulfonylureas, thiazolidinediones, or α-glucosidase inhibitors. It is a white to off-white crystalline compound. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. The structural formula is as shown. C4H12ClN5 M.W. 165.63. Glipizide and metformin hydrochloride tablets, USP for oral administration contain 2.5 mg glipizide, USP with 250 mg metformin hydrochloride, USP, 2.5 mg glipizide, USP with 500 mg metformin hydrochloride, USP, and 5 mg glipizide, USP with 500 mg metformin hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, talc, and titanium dioxide. Additionally, 2.5 mg/250 mg and 5 mg/500 mg tablets contain iron oxide black, iron oxide red, and iron oxide yellow. The tablets are film-coated, which provides color differentiation.</Description>
  </NDC>
  <NDC>
    <NDCCode>10631-093-62</NDCCode>
    <PackageDescription>63 g in 1 CAN (10631-093-62) </PackageDescription>
    <NDC11Code>10631-0093-62</NDC11Code>
    <ProductNDC>10631-093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kenalog</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>AEROSOL, SPRAY</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20090519</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA012104</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>.147</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090519</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Kenalog Spray (Triamcinolone Acetonide Topical Aerosol, USP) is indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The structural formula is. A two-second application, which covers an area approximately the size of the hand, delivers an amount of triamcinolone acetonide not exceeding 0.2 mg. After spraying, the nonvolatile vehicle remaining on the skin contains approximately 0.2% triamcinolone acetonide. Each gram of spray provides 0.147 mg triamcinolone acetonide in a vehicle of isopropyl palmitate, dehydrated alcohol (10.3%), and isobutane propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>0187-3750-10</NDCCode>
    <PackageDescription>100 CAPSULE, GELATIN COATED in 1 BOTTLE (0187-3750-10)</PackageDescription>
    <NDC11Code>00187-3750-10</NDC11Code>
    <ProductNDC>0187-3750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Librium</ProprietaryName>
    <NonProprietaryName>Chlordiazepoxide Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19770921</StartMarketingDate>
    <EndMarketingDate>20141201</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA085461</ApplicationNumber>
    <LabelerName>Valeant Pharmaceuticals North America LLC</LabelerName>
    <SubstanceName>CHLORDIAZEPOXIDE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2014-12-05</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>0220-3750-11</NDCCode>
    <PackageDescription>30 mL in 1 BOTTLE, GLASS (0220-3750-11)</PackageDescription>
    <NDC11Code>00220-3750-11</NDC11Code>
    <ProductNDC>0220-3750</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Oenanthe Crocata Root</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Laboratoires Boiron</LabelerName>
    <SubstanceName>OENANTHE CROCATA ROOT</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0220-3750-12</NDCCode>
    <PackageDescription>60 mL in 1 BOTTLE, GLASS (0220-3750-12)</PackageDescription>
    <NDC11Code>00220-3750-12</NDC11Code>
    <ProductNDC>0220-3750</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Oenanthe Crocata Root</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Laboratoires Boiron</LabelerName>
    <SubstanceName>OENANTHE CROCATA ROOT</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0338-4210-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4210-02)  *  1 mL in 1 VIAL, GLASS (0338-7112-01)  *  1 mL in 1 VIAL, GLASS (0338-7332-01)  *  1 mL in 1 VIAL, GLASS (0338-7201-01)  *  1 mL in 1 VIAL, GLASS (0338-7401-01) </PackageDescription>
    <NDC11Code>00338-4210-02</NDC11Code>
    <ProductNDC>0338-4210</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-4211-04</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4211-04)  *  2 mL in 1 VIAL, GLASS (0338-7112-02)  *  2 mL in 1 VIAL, GLASS (0338-7332-02)  *  2 mL in 1 VIAL, GLASS (0338-7201-02)  *  2 mL in 1 VIAL, GLASS (0338-7401-02) </PackageDescription>
    <NDC11Code>00338-4211-04</NDC11Code>
    <ProductNDC>0338-4211</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-4212-10</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4212-10)  *  5 mL in 1 VIAL, GLASS (0338-7332-05)  *  5 mL in 1 VIAL, GLASS (0338-7201-05)  *  5 mL in 1 VIAL, GLASS (0338-7401-05)  *  5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
    <NDC11Code>00338-4212-10</NDC11Code>
    <ProductNDC>0338-4212</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-4301-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4301-02)  *  1 mL in 1 VIAL, GLASS (0338-7332-01)  *  1 mL in 1 VIAL, GLASS (0338-7201-01)  *  1 mL in 1 VIAL, GLASS (0338-7401-01)  *  1 mL in 1 VIAL, GLASS (0338-7112-01) </PackageDescription>
    <NDC11Code>00338-4301-02</NDC11Code>
    <ProductNDC>0338-4301</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-4302-04</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4302-04)  *  2 mL in 1 VIAL, GLASS (0338-7332-02)  *  2 mL in 1 VIAL, GLASS (0338-7201-02)  *  2 mL in 1 VIAL, GLASS (0338-7401-02)  *  2 mL in 1 VIAL, GLASS (0338-7112-02) </PackageDescription>
    <NDC11Code>00338-4302-04</NDC11Code>
    <ProductNDC>0338-4302</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-4303-10</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0338-4303-10)  *  5 mL in 1 VIAL, GLASS (0338-7332-05)  *  5 mL in 1 VIAL, GLASS (0338-7201-05)  *  5 mL in 1 VIAL, GLASS (0338-7401-05)  *  5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
    <NDC11Code>00338-4303-10</NDC11Code>
    <ProductNDC>0338-4303</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8402-02</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-02)  / 2 mL in 1 SYRINGE, PLASTIC (0338-8402-01) </PackageDescription>
    <NDC11Code>00338-8402-02</NDC11Code>
    <ProductNDC>0338-8402</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>90; 500</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (&gt;1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8402-04</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-04)  / 4 mL in 1 SYRINGE, PLASTIC (0338-8402-03) </PackageDescription>
    <NDC11Code>00338-8402-04</NDC11Code>
    <ProductNDC>0338-8402</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>90; 500</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (&gt;1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8402-10</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-10)  / 10 mL in 1 SYRINGE, PLASTIC (0338-8402-09) </PackageDescription>
    <NDC11Code>00338-8402-10</NDC11Code>
    <ProductNDC>0338-8402</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>90; 500</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (&gt;1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8503-02</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8503-02)  / 2 mL in 1 SYRINGE, PLASTIC (0338-8503-01) </PackageDescription>
    <NDC11Code>00338-8503-02</NDC11Code>
    <ProductNDC>0338-8503</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Artiss</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20080319</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125266</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>86.5; 4</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ARTISS is a fibrin sealant indicated to: 1 Adhere autologous skin grafts to surgically prepared wound beds resulting from burns in adult and pediatric populations greater than or equal to 1 year of age., 2 Adhere tissue flaps during facial rhytidectomy surgery (face-lift).</IndicationAndUsage>
    <Description>ARTISS [Fibrin Sealant (Human)] is a two-component fibrin sealant made from pooled human plasma. Sealer Protein SolutionTotal protein: 96 -125 mg/mLFibrinogen: 67 - 106 mg/mLFibrinolysis Inhibitor (Synthetic): 2250 - 3750 Kallidinogenase Inhibiting Unit/mL. Other ingredients include: Human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection (WFI). Thrombin SolutionThrombin (Human): 2.5 - 6.5 units/mL1Calcium Chloride: 36 - 44 µmol/mLOther ingredients include: Human albumin, sodium chloride and water for injection (WFI). 1 The potency expressed in units is determined using a clotting assay against an internal reference standard for potency that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit is equivalent to an International Unit (IU). Sealer Protein (Human). Sealer Protein (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (1). The active ingredient in Sealer Protein (Human) is fibrinogen. A Fibrinolysis Inhibitor, Aprotinin (Synthetic) is included in the Sealer Protein (Human) component to delay fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human). Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (2). Sealer Protein (Human) and Thrombin (Human) are made from pooled human plasma collected at US licensed collection centers. The vapor heat and solvent/detergent treatment steps used in the manufacturing process have been shown to be capable of significant viral reduction. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma [see Viral Clearance below and Warnings and Precautions (5.4)]. Viral Clearance. The manufacturing procedure includes processing steps designed to further reduce the risk of viral transmission. In particular, vapor heating and solvent/detergent treatment processes are included in the manufacturing of Sealer Protein Concentrate and Thrombin. Validation studies were conducted using samples drawn from manufacturing intermediates for each of the two human plasma derived components. These samples were spiked with stock virus suspensions of known titers followed by further processing under conditions equivalent to those in the respective manufacturing steps. The stock virus suspensions represent HIV, HBV, HCV, HAV and Human Parvovirus B19. The virus reduction factors (expressed as log10) of independent manufacturing steps are shown in Table 6 for each of the viruses tested. n.d. = not determined. HIV-1: Human immunodeficiency virus 1; HAV: Hepatitis A virus; BVDV: Bovine viral diarrhea virus, a model for Hepatitis C virus; PRV: Pseudorabies virus, a model for enveloped DNA viruses, among those Hepatitis B virus; MMV: Mice minute virus, a model for B19V. In addition, Human Parvovirus B19 was used to investigate the upstream Thrombin precursor mass capture step, the Sealer Protein early manufacturing steps and the Thrombin and Sealer Protein vapor heating steps. Using quantitative PCR assays, the estimated log reduction factors obtained were 1.7 and 3.4 for the Thrombin precursor mass capture step and Sealer Protein early manufacturing steps and &gt;4 / 1.0 for the Thrombin / Sealer Protein vapor heating steps, respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8503-04</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8503-04)  / 4 mL in 1 SYRINGE, PLASTIC (0338-8503-03) </PackageDescription>
    <NDC11Code>00338-8503-04</NDC11Code>
    <ProductNDC>0338-8503</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Artiss</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20080319</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125266</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>86.5; 4</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ARTISS is a fibrin sealant indicated to: 1 Adhere autologous skin grafts to surgically prepared wound beds resulting from burns in adult and pediatric populations greater than or equal to 1 year of age., 2 Adhere tissue flaps during facial rhytidectomy surgery (face-lift).</IndicationAndUsage>
    <Description>ARTISS [Fibrin Sealant (Human)] is a two-component fibrin sealant made from pooled human plasma. Sealer Protein SolutionTotal protein: 96 -125 mg/mLFibrinogen: 67 - 106 mg/mLFibrinolysis Inhibitor (Synthetic): 2250 - 3750 Kallidinogenase Inhibiting Unit/mL. Other ingredients include: Human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection (WFI). Thrombin SolutionThrombin (Human): 2.5 - 6.5 units/mL1Calcium Chloride: 36 - 44 µmol/mLOther ingredients include: Human albumin, sodium chloride and water for injection (WFI). 1 The potency expressed in units is determined using a clotting assay against an internal reference standard for potency that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit is equivalent to an International Unit (IU). Sealer Protein (Human). Sealer Protein (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (1). The active ingredient in Sealer Protein (Human) is fibrinogen. A Fibrinolysis Inhibitor, Aprotinin (Synthetic) is included in the Sealer Protein (Human) component to delay fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human). Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (2). Sealer Protein (Human) and Thrombin (Human) are made from pooled human plasma collected at US licensed collection centers. The vapor heat and solvent/detergent treatment steps used in the manufacturing process have been shown to be capable of significant viral reduction. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma [see Viral Clearance below and Warnings and Precautions (5.4)]. Viral Clearance. The manufacturing procedure includes processing steps designed to further reduce the risk of viral transmission. In particular, vapor heating and solvent/detergent treatment processes are included in the manufacturing of Sealer Protein Concentrate and Thrombin. Validation studies were conducted using samples drawn from manufacturing intermediates for each of the two human plasma derived components. These samples were spiked with stock virus suspensions of known titers followed by further processing under conditions equivalent to those in the respective manufacturing steps. The stock virus suspensions represent HIV, HBV, HCV, HAV and Human Parvovirus B19. The virus reduction factors (expressed as log10) of independent manufacturing steps are shown in Table 6 for each of the viruses tested. n.d. = not determined. HIV-1: Human immunodeficiency virus 1; HAV: Hepatitis A virus; BVDV: Bovine viral diarrhea virus, a model for Hepatitis C virus; PRV: Pseudorabies virus, a model for enveloped DNA viruses, among those Hepatitis B virus; MMV: Mice minute virus, a model for B19V. In addition, Human Parvovirus B19 was used to investigate the upstream Thrombin precursor mass capture step, the Sealer Protein early manufacturing steps and the Thrombin and Sealer Protein vapor heating steps. Using quantitative PCR assays, the estimated log reduction factors obtained were 1.7 and 3.4 for the Thrombin precursor mass capture step and Sealer Protein early manufacturing steps and &gt;4 / 1.0 for the Thrombin / Sealer Protein vapor heating steps, respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-8503-10</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8503-10)  / 10 mL in 1 SYRINGE, PLASTIC (0338-8503-09) </PackageDescription>
    <NDC11Code>00338-8503-10</NDC11Code>
    <ProductNDC>0338-8503</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Artiss</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20080319</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125266</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>86.5; 4</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ARTISS is a fibrin sealant indicated to: 1 Adhere autologous skin grafts to surgically prepared wound beds resulting from burns in adult and pediatric populations greater than or equal to 1 year of age., 2 Adhere tissue flaps during facial rhytidectomy surgery (face-lift).</IndicationAndUsage>
    <Description>ARTISS [Fibrin Sealant (Human)] is a two-component fibrin sealant made from pooled human plasma. Sealer Protein SolutionTotal protein: 96 -125 mg/mLFibrinogen: 67 - 106 mg/mLFibrinolysis Inhibitor (Synthetic): 2250 - 3750 Kallidinogenase Inhibiting Unit/mL. Other ingredients include: Human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection (WFI). Thrombin SolutionThrombin (Human): 2.5 - 6.5 units/mL1Calcium Chloride: 36 - 44 µmol/mLOther ingredients include: Human albumin, sodium chloride and water for injection (WFI). 1 The potency expressed in units is determined using a clotting assay against an internal reference standard for potency that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit is equivalent to an International Unit (IU). Sealer Protein (Human). Sealer Protein (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (1). The active ingredient in Sealer Protein (Human) is fibrinogen. A Fibrinolysis Inhibitor, Aprotinin (Synthetic) is included in the Sealer Protein (Human) component to delay fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human). Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (2). Sealer Protein (Human) and Thrombin (Human) are made from pooled human plasma collected at US licensed collection centers. The vapor heat and solvent/detergent treatment steps used in the manufacturing process have been shown to be capable of significant viral reduction. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma [see Viral Clearance below and Warnings and Precautions (5.4)]. Viral Clearance. The manufacturing procedure includes processing steps designed to further reduce the risk of viral transmission. In particular, vapor heating and solvent/detergent treatment processes are included in the manufacturing of Sealer Protein Concentrate and Thrombin. Validation studies were conducted using samples drawn from manufacturing intermediates for each of the two human plasma derived components. These samples were spiked with stock virus suspensions of known titers followed by further processing under conditions equivalent to those in the respective manufacturing steps. The stock virus suspensions represent HIV, HBV, HCV, HAV and Human Parvovirus B19. The virus reduction factors (expressed as log10) of independent manufacturing steps are shown in Table 6 for each of the viruses tested. n.d. = not determined. HIV-1: Human immunodeficiency virus 1; HAV: Hepatitis A virus; BVDV: Bovine viral diarrhea virus, a model for Hepatitis C virus; PRV: Pseudorabies virus, a model for enveloped DNA viruses, among those Hepatitis B virus; MMV: Mice minute virus, a model for B19V. In addition, Human Parvovirus B19 was used to investigate the upstream Thrombin precursor mass capture step, the Sealer Protein early manufacturing steps and the Thrombin and Sealer Protein vapor heating steps. Using quantitative PCR assays, the estimated log reduction factors obtained were 1.7 and 3.4 for the Thrombin precursor mass capture step and Sealer Protein early manufacturing steps and &gt;4 / 1.0 for the Thrombin / Sealer Protein vapor heating steps, respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9560-01</NDCCode>
    <PackageDescription>2 mL in 1 SYRINGE, PLASTIC (0338-9560-01) </PackageDescription>
    <NDC11Code>00338-9560-01</NDC11Code>
    <ProductNDC>0338-9560</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Tisseel</ProprietaryName>
    <ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
    <NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19980501</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103980</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
    <StrengthNumber>86.5; 500</StrengthNumber>
    <StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
    <Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1  The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2  Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3  Thrombin Solution, 4  Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5  * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
  </NDC>
</NDCList>