{
"NDC": [
{
"NDCCode": "0115-1654-08",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (0115-1654-08) > 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "00115-1654-08",
"ProductNDC": "0115-1654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20161101",
"EndMarketingDate": "20200131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076307",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161101",
"EndMarketingDatePackage": "20200131",
"SamplePackage": "N"
},
{
"NDCCode": "38779-1654-8",
"PackageDescription": "500 g in 1 JAR (38779-1654-8) ",
"NDC11Code": "38779-1654-08",
"ProductNDC": "38779-1654",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Thyroid, Porcine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20090522",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Medisca Inc.",
"SubstanceName": "THYROID",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-11-27",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "22-MAY-09"
},
{
"NDCCode": "67296-1654-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (67296-1654-9) ",
"NDC11Code": "67296-1654-09",
"ProductNDC": "67296-1654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071881",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride tablets USP are indicated for the treatment of the following. Angina. 1.Angina at rest including. -Vasospastic (Prinzmetal's variant) angina. -Unstable (crescendo, pre-infarction) angina. 2.Chronic stable angina (classic effort-associated angina). Arrhythmias. 1.In association with digitalis for the control of ventricular rate at rest and during stress in patients with chronic atrial flutter and/or atrial fibrillation (see WARNINGS: Accessory bypass tract ). 2.Prophylaxis of repetitive paroxysmal supraventricular tachycardia. Essential hypertension. Verapamil hydrochloride is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.",
"Description": "Verapamil hydrochloride (verapamil HCl) tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg or 120 mg of verapamil hydrochloride. The structural formula of verapamil HCl is. C 27 H 38 N 2 O 4 HCl M.W. = 491.08. Benzeneacetonitrile, a-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-a-(1-methylethyl) hydrochloride. Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, light mineral oil, sodium lauryl sulfate, titanium dioxide and hypromellose."
},
{
"NDCCode": "70771-1654-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (70771-1654-1) ",
"NDC11Code": "70771-1654-01",
"ProductNDC": "70771-1654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vigabatrin",
"NonProprietaryName": "Vigabatrin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215707",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "VIGABATRIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220120",
"SamplePackage": "N",
"IndicationAndUsage": "Vigabatrin tablets are indicated for the treatment of: : 1 Refractory Complex Partial Seizures as adjunctive therapy in patients 2 years of age and older who have responded inadequately to several alternative treatments; Vigabatrin tablets are not indicated as a first line agent (1.1).",
"Description": "Vigabatrin Tablets, USP is an oral antiepileptic drug and is available as a white to off-white film-coated 500 mg tablets. The chemical name of vigabatrin USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C6H11NO2 and the molecular weight is 129.16. It has the following structural formula. Vigabatrin, USP is a white or almost white powder which is freely soluble in water, slightly soluble in methanol; practically insoluble in methylene chloride. The pH of a 1% aqueous solution is about 6.9. The noctanol/ water partition coefficient of vigabatrin, USP is about 0.011 (log P=-1.96) at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Each vigabatrin tablet contains 500 mg of vigabatrin, USP. The inactive ingredients are hydroxypropyl methylcellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "0115-1010-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (0115-1010-08) ",
"NDC11Code": "00115-1010-08",
"ProductNDC": "0115-1010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077971",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20071027",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson’s disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white, odorless, or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate."
},
{
"NDCCode": "0115-1012-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (0115-1012-08) ",
"NDC11Code": "00115-1012-08",
"ProductNDC": "0115-1012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077971",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20071027",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson’s disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white, odorless, or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate."
},
{
"NDCCode": "0115-1120-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1120-08)",
"NDC11Code": "00115-1120-08",
"ProductNDC": "0115-1120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Galantamine Hydrobromide",
"NonProprietaryName": "Galantamine Hydrobromide",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078484",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "GALANTAMINE HYDROBROMIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-04-13"
},
{
"NDCCode": "0115-1121-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1121-08)",
"NDC11Code": "00115-1121-08",
"ProductNDC": "0115-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Galantamine Hydrobromide",
"NonProprietaryName": "Galantamine Hydrobromide",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078484",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "GALANTAMINE HYDROBROMIDE",
"StrengthNumber": "16",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-04-13"
},
{
"NDCCode": "0115-1122-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1122-08)",
"NDC11Code": "00115-1122-08",
"ProductNDC": "0115-1122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Galantamine Hydrobromide",
"NonProprietaryName": "Galantamine Hydrobromide",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078484",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "GALANTAMINE HYDROBROMIDE",
"StrengthNumber": "24",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-04-13"
},
{
"NDCCode": "0115-1205-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (0115-1205-08)",
"NDC11Code": "00115-1205-08",
"ProductNDC": "0115-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzphetamine Hydrochloride",
"NonProprietaryName": "Benzphetamine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20081201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040845",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "BENZPHETAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1208-08",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (0115-1208-08)",
"NDC11Code": "00115-1208-08",
"ProductNDC": "0115-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090505",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1209-08",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (0115-1209-08)",
"NDC11Code": "00115-1209-08",
"ProductNDC": "0115-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090505",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1231-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1231-08) ",
"NDC11Code": "00115-1231-08",
"ProductNDC": "0115-1231",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1232-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1232-08) ",
"NDC11Code": "00115-1232-08",
"ProductNDC": "0115-1232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1233-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1233-08) ",
"NDC11Code": "00115-1233-08",
"ProductNDC": "0115-1233",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1234-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1234-08) ",
"NDC11Code": "00115-1234-08",
"ProductNDC": "0115-1234",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1245-08",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1245-08)",
"NDC11Code": "00115-1245-08",
"ProductNDC": "0115-1245",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090024",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "45",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1246-08",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1246-08)",
"NDC11Code": "00115-1246-08",
"ProductNDC": "0115-1246",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090024",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1247-08",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1247-08)",
"NDC11Code": "00115-1247-08",
"ProductNDC": "0115-1247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090024",
"LabelerName": "Global Pharmaceuticals, Division of Impax Laboratories Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "135",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0115-1248-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1248-08) ",
"NDC11Code": "00115-1248-08",
"ProductNDC": "0115-1248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204717",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 ½ EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac."
},
{
"NDCCode": "0115-1249-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1249-08) ",
"NDC11Code": "00115-1249-08",
"ProductNDC": "0115-1249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204717",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 ½ EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac."
},
{
"NDCCode": "0115-1250-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1250-08) ",
"NDC11Code": "00115-1250-08",
"ProductNDC": "0115-1250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204717",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 ½ EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac."
},
{
"NDCCode": "0115-1251-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1251-08) ",
"NDC11Code": "00115-1251-08",
"ProductNDC": "0115-1251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204717",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 ½ EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac."
},
{
"NDCCode": "0115-1277-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1277-08) ",
"NDC11Code": "00115-1277-08",
"ProductNDC": "0115-1277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1278-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1278-08) ",
"NDC11Code": "00115-1278-08",
"ProductNDC": "0115-1278",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1279-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1279-08) ",
"NDC11Code": "00115-1279-08",
"ProductNDC": "0115-1279",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1280-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1280-08) ",
"NDC11Code": "00115-1280-08",
"ProductNDC": "0115-1280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1281-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1281-08) ",
"NDC11Code": "00115-1281-08",
"ProductNDC": "0115-1281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1282-08",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1282-08) ",
"NDC11Code": "00115-1282-08",
"ProductNDC": "0115-1282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200411",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160412",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is."
},
{
"NDCCode": "0115-1309-08",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0115-1309-08) ",
"NDC11Code": "00115-1309-08",
"ProductNDC": "0115-1309",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Carbonate",
"NonProprietaryName": "Sevelamer Carbonate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171023",
"EndMarketingDate": "20191231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090975",
"LabelerName": "Impax Generics",
"SubstanceName": "SEVELAMER CARBONATE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC],Phosphate Chelating Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171023",
"EndMarketingDatePackage": "20191231",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0115-1654-08</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (0115-1654-08) > 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00115-1654-08</NDC11Code>
<ProductNDC>0115-1654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161101</StartMarketingDate>
<EndMarketingDate>20200131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076307</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161101</StartMarketingDatePackage>
<EndMarketingDatePackage>20200131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>38779-1654-8</NDCCode>
<PackageDescription>500 g in 1 JAR (38779-1654-8) </PackageDescription>
<NDC11Code>38779-1654-08</NDC11Code>
<ProductNDC>38779-1654</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Thyroid, Porcine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20090522</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>THYROID</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-27</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-MAY-09</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>67296-1654-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (67296-1654-9) </PackageDescription>
<NDC11Code>67296-1654-09</NDC11Code>
<ProductNDC>67296-1654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071881</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride tablets USP are indicated for the treatment of the following. Angina. 1.Angina at rest including. -Vasospastic (Prinzmetal's variant) angina. -Unstable (crescendo, pre-infarction) angina. 2.Chronic stable angina (classic effort-associated angina). Arrhythmias. 1.In association with digitalis for the control of ventricular rate at rest and during stress in patients with chronic atrial flutter and/or atrial fibrillation (see WARNINGS: Accessory bypass tract ). 2.Prophylaxis of repetitive paroxysmal supraventricular tachycardia. Essential hypertension. Verapamil hydrochloride is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.</IndicationAndUsage>
<Description>Verapamil hydrochloride (verapamil HCl) tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg or 120 mg of verapamil hydrochloride. The structural formula of verapamil HCl is. C 27 H 38 N 2 O 4 HCl M.W. = 491.08. Benzeneacetonitrile, a-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-a-(1-methylethyl) hydrochloride. Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, light mineral oil, sodium lauryl sulfate, titanium dioxide and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>70771-1654-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (70771-1654-1) </PackageDescription>
<NDC11Code>70771-1654-01</NDC11Code>
<ProductNDC>70771-1654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vigabatrin</ProprietaryName>
<NonProprietaryName>Vigabatrin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215707</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>VIGABATRIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vigabatrin tablets are indicated for the treatment of: : 1 Refractory Complex Partial Seizures as adjunctive therapy in patients 2 years of age and older who have responded inadequately to several alternative treatments; Vigabatrin tablets are not indicated as a first line agent (1.1).</IndicationAndUsage>
<Description>Vigabatrin Tablets, USP is an oral antiepileptic drug and is available as a white to off-white film-coated 500 mg tablets. The chemical name of vigabatrin USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C6H11NO2 and the molecular weight is 129.16. It has the following structural formula. Vigabatrin, USP is a white or almost white powder which is freely soluble in water, slightly soluble in methanol; practically insoluble in methylene chloride. The pH of a 1% aqueous solution is about 6.9. The noctanol/ water partition coefficient of vigabatrin, USP is about 0.011 (log P=-1.96) at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Each vigabatrin tablet contains 500 mg of vigabatrin, USP. The inactive ingredients are hydroxypropyl methylcellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>0115-1010-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (0115-1010-08) </PackageDescription>
<NDC11Code>00115-1010-08</NDC11Code>
<ProductNDC>0115-1010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077971</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson’s disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white, odorless, or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0115-1012-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (0115-1012-08) </PackageDescription>
<NDC11Code>00115-1012-08</NDC11Code>
<ProductNDC>0115-1012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077971</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson’s disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white, odorless, or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0115-1120-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1120-08)</PackageDescription>
<NDC11Code>00115-1120-08</NDC11Code>
<ProductNDC>0115-1120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Galantamine Hydrobromide</ProprietaryName>
<NonProprietaryName>Galantamine Hydrobromide</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078484</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-04-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1121-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1121-08)</PackageDescription>
<NDC11Code>00115-1121-08</NDC11Code>
<ProductNDC>0115-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Galantamine Hydrobromide</ProprietaryName>
<NonProprietaryName>Galantamine Hydrobromide</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078484</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
<StrengthNumber>16</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-04-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1122-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1122-08)</PackageDescription>
<NDC11Code>00115-1122-08</NDC11Code>
<ProductNDC>0115-1122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Galantamine Hydrobromide</ProprietaryName>
<NonProprietaryName>Galantamine Hydrobromide</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078484</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
<StrengthNumber>24</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-04-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1205-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (0115-1205-08)</PackageDescription>
<NDC11Code>00115-1205-08</NDC11Code>
<ProductNDC>0115-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzphetamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Benzphetamine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040845</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>BENZPHETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1208-08</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (0115-1208-08)</PackageDescription>
<NDC11Code>00115-1208-08</NDC11Code>
<ProductNDC>0115-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090505</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1209-08</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (0115-1209-08)</PackageDescription>
<NDC11Code>00115-1209-08</NDC11Code>
<ProductNDC>0115-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090505</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1231-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1231-08) </PackageDescription>
<NDC11Code>00115-1231-08</NDC11Code>
<ProductNDC>0115-1231</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1232-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1232-08) </PackageDescription>
<NDC11Code>00115-1232-08</NDC11Code>
<ProductNDC>0115-1232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1233-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1233-08) </PackageDescription>
<NDC11Code>00115-1233-08</NDC11Code>
<ProductNDC>0115-1233</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1234-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1234-08) </PackageDescription>
<NDC11Code>00115-1234-08</NDC11Code>
<ProductNDC>0115-1234</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1245-08</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1245-08)</PackageDescription>
<NDC11Code>00115-1245-08</NDC11Code>
<ProductNDC>0115-1245</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090024</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>45</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1246-08</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1246-08)</PackageDescription>
<NDC11Code>00115-1246-08</NDC11Code>
<ProductNDC>0115-1246</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090024</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1247-08</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0115-1247-08)</PackageDescription>
<NDC11Code>00115-1247-08</NDC11Code>
<ProductNDC>0115-1247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090024</ApplicationNumber>
<LabelerName>Global Pharmaceuticals, Division of Impax Laboratories Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>135</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0115-1248-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1248-08) </PackageDescription>
<NDC11Code>00115-1248-08</NDC11Code>
<ProductNDC>0115-1248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204717</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 &frac12; EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0115-1249-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1249-08) </PackageDescription>
<NDC11Code>00115-1249-08</NDC11Code>
<ProductNDC>0115-1249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204717</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 &frac12; EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0115-1250-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1250-08) </PackageDescription>
<NDC11Code>00115-1250-08</NDC11Code>
<ProductNDC>0115-1250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204717</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 &frac12; EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0115-1251-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1251-08) </PackageDescription>
<NDC11Code>00115-1251-08</NDC11Code>
<ProductNDC>0115-1251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204717</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. (1.2), 3 hypertension. (1.3).</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha1-blocking activity. It is (2RS)-1-(9H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C24H26N2O4H3PO4 &frac12; EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0115-1277-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1277-08) </PackageDescription>
<NDC11Code>00115-1277-08</NDC11Code>
<ProductNDC>0115-1277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1278-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1278-08) </PackageDescription>
<NDC11Code>00115-1278-08</NDC11Code>
<ProductNDC>0115-1278</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1279-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1279-08) </PackageDescription>
<NDC11Code>00115-1279-08</NDC11Code>
<ProductNDC>0115-1279</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1280-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1280-08) </PackageDescription>
<NDC11Code>00115-1280-08</NDC11Code>
<ProductNDC>0115-1280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1281-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1281-08) </PackageDescription>
<NDC11Code>00115-1281-08</NDC11Code>
<ProductNDC>0115-1281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1282-08</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0115-1282-08) </PackageDescription>
<NDC11Code>00115-1282-08</NDC11Code>
<ProductNDC>0115-1282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200411</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release capsules are indicated for the management of severe and persistent pain, that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including morphine sulfate extended-release capsules for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release capsules are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Capsules, USP, an opioid agonist, are for oral use and contain pellets of morphine sulfate. Each morphine sulfate extended-release capsule, USP contains either 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, 80 mg, or 100 mg of morphine sulfate, USP and the following inactive ingredients common to all strengths: hypromellose, ethylcellulose, methacrylic acid copolymer, polyethylene glycol, diethyl phthalate, talc, corn starch, and sucrose. The capsule shells contain gelatin and titanium dioxide. In addition, the 20 mg and 40 mg capsule shells contain yellow iron oxide; the 30 mg and 40 mg capsule shells contain FD&C Blue No. 1 and FD&C Red No. 3; the 50 mg capsule shell contains FD&C Blue No. 1; the 60 mg capsule shell contains FD&C Red No. 40; the 80 mg capsule shell contains D&C Red No. 28, D&C Yellow No. 10, and FD&C Red No. 40; and the 100 mg capsule shell contains D&C Yellow No. 10 and FD&C Green No. 3. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The chemical name of morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate. The molecular formula is (C17H19NO3)2∙H2SO4∙5H2O and its molecular weight is 758.85. Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0115-1309-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0115-1309-08) </PackageDescription>
<NDC11Code>00115-1309-08</NDC11Code>
<ProductNDC>0115-1309</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Carbonate</ProprietaryName>
<NonProprietaryName>Sevelamer Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171023</StartMarketingDate>
<EndMarketingDate>20191231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090975</ApplicationNumber>
<LabelerName>Impax Generics</LabelerName>
<SubstanceName>SEVELAMER CARBONATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC],Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171023</StartMarketingDatePackage>
<EndMarketingDatePackage>20191231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>