{
"NDC": [
{
"NDCCode": "0173-0956-76",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0173-0956-76) / 8 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00173-0956-76",
"ProductNDC": "0173-0956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Utebzi",
"NonProprietaryName": "Tebipenem Pivoxil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20261001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215960",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "TEBIPENEM PIVOXIL HYDROBROMIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261001",
"SamplePackage": "N",
"IndicationAndUsage": "UTEBZI is a penem antibacterial indicated for the treatment of complicated urinary tract infections (cUTI), including pyelonephritis, caused by the following susceptible microorganisms: Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae species complex, Klebsiella oxytoca, and Enterococcus faecalis in adult patients who have limited or no alternative oral treatment options. (1.1). Usage to Reduce Development of Drug‑Resistant Bacteria. To reduce the development of drug‑resistant bacteria and maintain the effectiveness of UTEBZI and other antibacterial drugs, UTEBZI should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.2).",
"Description": "UTEBZI (tebipenem pivoxil) tablets, for oral use, contain tebipenem pivoxil hydrobromide, the hydrobromide salt of tebipenem pivoxil, a prodrug of tebipenem, a carbapenem antibacterial. The chemical name is (pivaloyloxy)methyl (4R,5S,6S)-3-((1-(4,5-dihydrothiazol-2-yl)azetidin-3-yl)thio)-6-((R)-1-hydroxyethyl)-4-methyl-7-oxo-1-azabicylo[3.2.0]hept-2-ene-2-carboxylate hydrobromide. The empirical formula is C22H32BrN3O6S2 and the molecular weight is 578.54 g/mol. The structural formula of tebipenem pivoxil hydrobromide is shown below. Tebipenem pivoxil hydrobromide is a white to off-white powder and is sparingly soluble in water. Each film‑coated UTEBZI tablet contains 300 mg tebipenem pivoxil, present as 348.8 mg tebipenem pivoxil hydrobromide and the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, and silicon dioxide. The tablet film‑coating consists of FD&C blue 1, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "0363-0956-74",
"PackageDescription": "76.5 g in 1 CAN (0363-0956-74) ",
"NDC11Code": "00363-0956-74",
"ProductNDC": "0363-0956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walgreens Sport Spf 50",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "WALGREEN COMPANY",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 40; 50",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140110",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "31645-173-01",
"PackageDescription": "35 g in 1 TUBE (31645-173-01)",
"NDC11Code": "31645-0173-01",
"ProductNDC": "31645-173",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Super Cc Plus Cream",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Physicians Formula Inc",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "5.76; 2.94",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "31645-173-02",
"PackageDescription": "1 TUBE in 1 CARTON (31645-173-02) > 35 g in 1 TUBE (31645-173-01) ",
"NDC11Code": "31645-0173-02",
"ProductNDC": "31645-173",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Super Cc Plus Cream",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Physicians Formula Inc",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "5.76; 2.94",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140101",
"SamplePackage": "N"
},
{
"NDCCode": "49288-0173-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0173-3)",
"NDC11Code": "49288-0173-03",
"ProductNDC": "49288-0173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920206",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102225",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "3000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0173-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0173-4)",
"NDC11Code": "49288-0173-04",
"ProductNDC": "49288-0173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920206",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102225",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "3000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0173-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0173-5)",
"NDC11Code": "49288-0173-05",
"ProductNDC": "49288-0173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920206",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102225",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "3000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "53746-173-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (53746-173-10) ",
"NDC11Code": "53746-0173-10",
"ProductNDC": "53746-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090041",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets)."
},
{
"NDCCode": "53746-173-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53746-173-30) ",
"NDC11Code": "53746-0173-30",
"ProductNDC": "53746-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090041",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets)."
},
{
"NDCCode": "53746-173-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (53746-173-60) ",
"NDC11Code": "53746-0173-60",
"ProductNDC": "53746-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090041",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets)."
},
{
"NDCCode": "60687-173-57",
"PackageDescription": "60 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-173-57) / 1 TABLET in 1 BLISTER PACK (60687-173-11) ",
"NDC11Code": "60687-0173-57",
"ProductNDC": "60687-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090048",
"LabelerName": "American Health Packaging",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150803",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets)."
},
{
"NDCCode": "65162-173-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (65162-173-06) ",
"NDC11Code": "65162-0173-06",
"ProductNDC": "65162-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090041",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220324",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a white to off-white crystalline powder and is slightly soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets)."
},
{
"NDCCode": "71413-173-02",
"PackageDescription": "1 TUBE in 1 CARTON (71413-173-02) > 35 g in 1 TUBE (71413-173-01) ",
"NDC11Code": "71413-0173-02",
"ProductNDC": "71413-173",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Super Cc Plus Cream",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Baja Fur, S.A. de C.V.",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "5.76; 2.94",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140101",
"SamplePackage": "N"
},
{
"NDCCode": "0121-0956-08",
"PackageDescription": "1 BOTTLE in 1 CARTON (0121-0956-08) / 210 mL in 1 BOTTLE",
"NDC11Code": "00121-0956-08",
"ProductNDC": "0121-0956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atovaquone",
"NonProprietaryName": "Atovaquone",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20250404",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214272",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "ATOVAQUONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Antimalarial [EPC], Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250404",
"SamplePackage": "N",
"IndicationAndUsage": "Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jirovecii pneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprim-sulfamethoxazole (TMP-SMX). (1.1) , 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. (1.2) .",
"Description": "Atovaquone oral suspension USP is a quinone antimicrobial drug. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula:. Atovaquone oral suspension USP is a formulation of micro-fine particles of atovaquone, USP. Each 5 mL of atovaquone oral suspension USP contains 750 mg of atovaquone and the inactive ingredients benzyl alcohol, tutti frutti flavor, poloxamer 188, purified water, saccharin sodium, and xanthan gum."
},
{
"NDCCode": "0220-0956-41",
"PackageDescription": "5 [hp_C] in 1 TUBE (0220-0956-41) ",
"NDC11Code": "00220-0956-41",
"ProductNDC": "0220-0956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calcarea Phosphorica",
"NonProprietaryName": "Tribasic Calcium Phosphate",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "TRIBASIC CALCIUM PHOSPHATE",
"StrengthNumber": "5",
"StrengthUnit": "[hp_C]/5[hp_C]",
"Status": "Active",
"LastUpdate": "2023-11-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Growing Bone Pain*."
},
{
"NDCCode": "0268-0956-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (0268-0956-10) ",
"NDC11Code": "00268-0956-10",
"ProductNDC": "0268-0956",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Stemphylium Solani",
"NonProprietaryName": "Stemphylium Solani",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "STEMPHYLIUM SOLANI",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0956-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0956-50) ",
"NDC11Code": "00268-0956-50",
"ProductNDC": "0268-0956",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Stemphylium Solani",
"NonProprietaryName": "Stemphylium Solani",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "STEMPHYLIUM SOLANI",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "0363-0956-48",
"PackageDescription": "258 g in 1 CAN (0363-0956-48) ",
"NDC11Code": "00363-0956-48",
"ProductNDC": "0363-0956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walgreens Sport Spf 50",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "WALGREEN COMPANY",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 40; 50",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140110",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "0363-0956-63",
"PackageDescription": "312 CAN in 1 PACKAGE (0363-0956-63) > 156 g in 1 CAN (0363-0956-37) ",
"NDC11Code": "00363-0956-63",
"ProductNDC": "0363-0956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walgreens Sport Spf 50",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "WALGREEN COMPANY",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 40; 50",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140110",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "0555-0956-02",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0555-0956-02) ",
"NDC11Code": "00555-0956-02",
"ProductNDC": "0555-0956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextroamphetamine Sulfate",
"NonProprietaryName": "Dextroamphetamine Sulfate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20020226",
"EndMarketingDate": "20180731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076137",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DEXTROAMPHETAMINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20020226",
"EndMarketingDatePackage": "20180731",
"SamplePackage": "N"
},
{
"NDCCode": "0641-0956-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-0956-25) / 1 mL in 1 VIAL (0641-0956-21) ",
"NDC11Code": "00641-0956-25",
"ProductNDC": "0641-0956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19730919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083312",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19730919",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma. , 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled. , 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated. , 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused. , 5 Active treatment of motion sickness. , 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. , 7 As an adjunct to analgesics for the control of postoperative pain. , 8 Preoperative, postoperative, and obstetric (during labor) sedation. , 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.",
"Description": "Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-Phenothiazine-10-ethanamine,N,N,α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. C17H21ClN2S MW 320.88. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed."
},
{
"NDCCode": "10019-956-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (10019-956-01) / 50 mL in 1 VIAL, SINGLE-DOSE (10019-956-16) ",
"NDC11Code": "10019-0956-01",
"ProductNDC": "10019-956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20080521",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040745",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080521",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1), 2 Minimal Change Nephrotic Syndrome in Pediatric Patients:biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2)Limitations of Use:The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. (1.2).",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "10544-956-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (10544-956-30)",
"NDC11Code": "10544-0956-30",
"ProductNDC": "10544-956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040489",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.",
"Description": "Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "10544-956-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (10544-956-60)",
"NDC11Code": "10544-0956-60",
"ProductNDC": "10544-956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040489",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.",
"Description": "Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "10544-956-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (10544-956-90)",
"NDC11Code": "10544-0956-90",
"ProductNDC": "10544-956",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040489",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.",
"Description": "Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "10812-956-01",
"PackageDescription": "30 mL in 1 BOTTLE, GLASS (10812-956-01)",
"NDC11Code": "10812-0956-01",
"ProductNDC": "10812-956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neutrogena Healthy Skin Makeup",
"ProprietaryNameSuffix": "Sunscreen Broad Spectrum Spf20 - Fresh Beige 70",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130611",
"EndMarketingDate": "20180201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Johnson & Johnson Consumer Inc.",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "66",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2018-02-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "11410-956-17",
"PackageDescription": "1 TUBE in 1 BOX (11410-956-17) > 45 g in 1 TUBE",
"NDC11Code": "11410-0956-17",
"ProductNDC": "11410-956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Proactiv Md Adapalene",
"ProprietaryNameSuffix": "Acne Treatment",
"NonProprietaryName": "Adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170327",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020380",
"LabelerName": "Alchemee, LLC",
"SubstanceName": "ADAPALENE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170327",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of acne ."
},
{
"NDCCode": "11410-956-38",
"PackageDescription": "1 TUBE in 1 BLISTER PACK (11410-956-38) > 2 g in 1 TUBE",
"NDC11Code": "11410-0956-38",
"ProductNDC": "11410-956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Proactiv Md Adapalene",
"ProprietaryNameSuffix": "Acne Treatment",
"NonProprietaryName": "Adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170327",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020380",
"LabelerName": "Alchemee, LLC",
"SubstanceName": "ADAPALENE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170809",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of acne ."
},
{
"NDCCode": "11410-956-44",
"PackageDescription": "1 TUBE in 1 BOX (11410-956-44) > 15 g in 1 TUBE",
"NDC11Code": "11410-0956-44",
"ProductNDC": "11410-956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Proactiv Md Adapalene",
"ProprietaryNameSuffix": "Acne Treatment",
"NonProprietaryName": "Adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170327",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020380",
"LabelerName": "Alchemee, LLC",
"SubstanceName": "ADAPALENE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170327",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of acne ."
},
{
"NDCCode": "11673-956-08",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (11673-956-08) > 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "11673-0956-08",
"ProductNDC": "11673-956",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20190401",
"EndMarketingDate": "20221117",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Target Corporation",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190401",
"EndMarketingDatePackage": "20221117",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0173-0956-76</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0173-0956-76) / 8 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00173-0956-76</NDC11Code>
<ProductNDC>0173-0956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Utebzi</ProprietaryName>
<NonProprietaryName>Tebipenem Pivoxil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20261001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215960</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>TEBIPENEM PIVOXIL HYDROBROMIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UTEBZI is a penem antibacterial indicated for the treatment of complicated urinary tract infections (cUTI), including pyelonephritis, caused by the following susceptible microorganisms: Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae species complex, Klebsiella oxytoca, and Enterococcus faecalis in adult patients who have limited or no alternative oral treatment options. (1.1). Usage to Reduce Development of Drug‑Resistant Bacteria. To reduce the development of drug‑resistant bacteria and maintain the effectiveness of UTEBZI and other antibacterial drugs, UTEBZI should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.2).</IndicationAndUsage>
<Description>UTEBZI (tebipenem pivoxil) tablets, for oral use, contain tebipenem pivoxil hydrobromide, the hydrobromide salt of tebipenem pivoxil, a prodrug of tebipenem, a carbapenem antibacterial. The chemical name is (pivaloyloxy)methyl (4R,5S,6S)-3-((1-(4,5-dihydrothiazol-2-yl)azetidin-3-yl)thio)-6-((R)-1-hydroxyethyl)-4-methyl-7-oxo-1-azabicylo[3.2.0]hept-2-ene-2-carboxylate hydrobromide. The empirical formula is C22H32BrN3O6S2 and the molecular weight is 578.54 g/mol. The structural formula of tebipenem pivoxil hydrobromide is shown below. Tebipenem pivoxil hydrobromide is a white to off-white powder and is sparingly soluble in water. Each film‑coated UTEBZI tablet contains 300 mg tebipenem pivoxil, present as 348.8 mg tebipenem pivoxil hydrobromide and the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, and silicon dioxide. The tablet film‑coating consists of FD&C blue 1, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0363-0956-74</NDCCode>
<PackageDescription>76.5 g in 1 CAN (0363-0956-74) </PackageDescription>
<NDC11Code>00363-0956-74</NDC11Code>
<ProductNDC>0363-0956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walgreens Sport Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>WALGREEN COMPANY</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 40; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31645-173-01</NDCCode>
<PackageDescription>35 g in 1 TUBE (31645-173-01)</PackageDescription>
<NDC11Code>31645-0173-01</NDC11Code>
<ProductNDC>31645-173</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Super Cc Plus Cream</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Physicians Formula Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>5.76; 2.94</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>31645-173-02</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (31645-173-02) > 35 g in 1 TUBE (31645-173-01) </PackageDescription>
<NDC11Code>31645-0173-02</NDC11Code>
<ProductNDC>31645-173</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Super Cc Plus Cream</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Physicians Formula Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>5.76; 2.94</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49288-0173-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0173-3)</PackageDescription>
<NDC11Code>49288-0173-03</NDC11Code>
<ProductNDC>49288-0173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920206</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102225</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>3000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0173-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0173-4)</PackageDescription>
<NDC11Code>49288-0173-04</NDC11Code>
<ProductNDC>49288-0173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920206</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102225</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>3000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0173-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0173-5)</PackageDescription>
<NDC11Code>49288-0173-05</NDC11Code>
<ProductNDC>49288-0173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920206</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102225</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>3000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>53746-173-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (53746-173-10) </PackageDescription>
<NDC11Code>53746-0173-10</NDC11Code>
<ProductNDC>53746-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>53746-173-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53746-173-30) </PackageDescription>
<NDC11Code>53746-0173-30</NDC11Code>
<ProductNDC>53746-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>53746-173-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (53746-173-60) </PackageDescription>
<NDC11Code>53746-0173-60</NDC11Code>
<ProductNDC>53746-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>60687-173-57</NDCCode>
<PackageDescription>60 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-173-57) / 1 TABLET in 1 BLISTER PACK (60687-173-11) </PackageDescription>
<NDC11Code>60687-0173-57</NDC11Code>
<ProductNDC>60687-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090048</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>65162-173-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (65162-173-06) </PackageDescription>
<NDC11Code>65162-0173-06</NDC11Code>
<ProductNDC>65162-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride, USP is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a white to off-white crystalline powder and is slightly soluble in water. Memantine hydrochloride, USP is available for oral administration as oblong, film-coated tablets containing either 5 mg or 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. In addition the following inactive ingredients are also present as components of the film coat: D&C Yellow #10, FD&C Blue #2, FD&C Yellow #6, macrogol, polyvinyl alcohol, talc, and titanium dioxide (5 mg tablets), and iron oxide black, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>71413-173-02</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (71413-173-02) > 35 g in 1 TUBE (71413-173-01) </PackageDescription>
<NDC11Code>71413-0173-02</NDC11Code>
<ProductNDC>71413-173</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Super Cc Plus Cream</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Baja Fur, S.A. de C.V.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>5.76; 2.94</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0121-0956-08</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0121-0956-08) / 210 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00121-0956-08</NDC11Code>
<ProductNDC>0121-0956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atovaquone</ProprietaryName>
<NonProprietaryName>Atovaquone</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250404</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214272</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>ATOVAQUONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jirovecii pneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprim-sulfamethoxazole (TMP-SMX). (1.1) , 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. (1.2) .</IndicationAndUsage>
<Description>Atovaquone oral suspension USP is a quinone antimicrobial drug. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula:. Atovaquone oral suspension USP is a formulation of micro-fine particles of atovaquone, USP. Each 5 mL of atovaquone oral suspension USP contains 750 mg of atovaquone and the inactive ingredients benzyl alcohol, tutti frutti flavor, poloxamer 188, purified water, saccharin sodium, and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>0220-0956-41</NDCCode>
<PackageDescription>5 [hp_C] in 1 TUBE (0220-0956-41) </PackageDescription>
<NDC11Code>00220-0956-41</NDC11Code>
<ProductNDC>0220-0956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calcarea Phosphorica</ProprietaryName>
<NonProprietaryName>Tribasic Calcium Phosphate</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>TRIBASIC CALCIUM PHOSPHATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[hp_C]/5[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Growing Bone Pain*.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0268-0956-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (0268-0956-10) </PackageDescription>
<NDC11Code>00268-0956-10</NDC11Code>
<ProductNDC>0268-0956</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Stemphylium Solani</ProprietaryName>
<NonProprietaryName>Stemphylium Solani</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>STEMPHYLIUM SOLANI</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0956-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0956-50) </PackageDescription>
<NDC11Code>00268-0956-50</NDC11Code>
<ProductNDC>0268-0956</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Stemphylium Solani</ProprietaryName>
<NonProprietaryName>Stemphylium Solani</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>STEMPHYLIUM SOLANI</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0363-0956-48</NDCCode>
<PackageDescription>258 g in 1 CAN (0363-0956-48) </PackageDescription>
<NDC11Code>00363-0956-48</NDC11Code>
<ProductNDC>0363-0956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walgreens Sport Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>WALGREEN COMPANY</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 40; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-0956-63</NDCCode>
<PackageDescription>312 CAN in 1 PACKAGE (0363-0956-63) > 156 g in 1 CAN (0363-0956-37) </PackageDescription>
<NDC11Code>00363-0956-63</NDC11Code>
<ProductNDC>0363-0956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walgreens Sport Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>WALGREEN COMPANY</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 40; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0555-0956-02</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0555-0956-02) </PackageDescription>
<NDC11Code>00555-0956-02</NDC11Code>
<ProductNDC>0555-0956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextroamphetamine Sulfate</ProprietaryName>
<NonProprietaryName>Dextroamphetamine Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020226</StartMarketingDate>
<EndMarketingDate>20180731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076137</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20020226</StartMarketingDatePackage>
<EndMarketingDatePackage>20180731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0641-0956-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-0956-25) / 1 mL in 1 VIAL (0641-0956-21) </PackageDescription>
<NDC11Code>00641-0956-25</NDC11Code>
<ProductNDC>0641-0956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19730919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083312</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19730919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma. , 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled. , 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated. , 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused. , 5 Active treatment of motion sickness. , 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. , 7 As an adjunct to analgesics for the control of postoperative pain. , 8 Preoperative, postoperative, and obstetric (during labor) sedation. , 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.</IndicationAndUsage>
<Description>Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-Phenothiazine-10-ethanamine,N,N,α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. C17H21ClN2S MW 320.88. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed.</Description>
</NDC>
<NDC>
<NDCCode>10019-956-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (10019-956-01) / 50 mL in 1 VIAL, SINGLE-DOSE (10019-956-16) </PackageDescription>
<NDC11Code>10019-0956-01</NDC11Code>
<ProductNDC>10019-956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20080521</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040745</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1), 2 Minimal Change Nephrotic Syndrome in Pediatric Patients:biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2)Limitations of Use:The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. (1.2).</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>10544-956-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (10544-956-30)</PackageDescription>
<NDC11Code>10544-0956-30</NDC11Code>
<ProductNDC>10544-956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040489</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>10544-956-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (10544-956-60)</PackageDescription>
<NDC11Code>10544-0956-60</NDC11Code>
<ProductNDC>10544-956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040489</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>10544-956-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (10544-956-90)</PackageDescription>
<NDC11Code>10544-0956-90</NDC11Code>
<ProductNDC>10544-956</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040489</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Methocarbamol Tablets, USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains either 500 mg or 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>10812-956-01</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, GLASS (10812-956-01)</PackageDescription>
<NDC11Code>10812-0956-01</NDC11Code>
<ProductNDC>10812-956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neutrogena Healthy Skin Makeup</ProprietaryName>
<ProprietaryNameSuffix>Sunscreen Broad Spectrum Spf20 - Fresh Beige 70</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130611</StartMarketingDate>
<EndMarketingDate>20180201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>66</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-02-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11410-956-17</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (11410-956-17) > 45 g in 1 TUBE</PackageDescription>
<NDC11Code>11410-0956-17</NDC11Code>
<ProductNDC>11410-956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Proactiv Md Adapalene</ProprietaryName>
<ProprietaryNameSuffix>Acne Treatment</ProprietaryNameSuffix>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170327</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020380</ApplicationNumber>
<LabelerName>Alchemee, LLC</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of acne .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11410-956-38</NDCCode>
<PackageDescription>1 TUBE in 1 BLISTER PACK (11410-956-38) > 2 g in 1 TUBE</PackageDescription>
<NDC11Code>11410-0956-38</NDC11Code>
<ProductNDC>11410-956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Proactiv Md Adapalene</ProprietaryName>
<ProprietaryNameSuffix>Acne Treatment</ProprietaryNameSuffix>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170327</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020380</ApplicationNumber>
<LabelerName>Alchemee, LLC</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of acne .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11410-956-44</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (11410-956-44) > 15 g in 1 TUBE</PackageDescription>
<NDC11Code>11410-0956-44</NDC11Code>
<ProductNDC>11410-956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Proactiv Md Adapalene</ProprietaryName>
<ProprietaryNameSuffix>Acne Treatment</ProprietaryNameSuffix>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170327</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020380</ApplicationNumber>
<LabelerName>Alchemee, LLC</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of acne .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-956-08</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (11673-956-08) > 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0956-08</NDC11Code>
<ProductNDC>11673-956</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190401</StartMarketingDate>
<EndMarketingDate>20221117</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190401</StartMarketingDatePackage>
<EndMarketingDatePackage>20221117</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>