{
"NDC": [
{
"NDCCode": "0264-9554-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-9554-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-9554-10",
"ProductNDC": "0264-9554",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Theophylline In Dextrose",
"NonProprietaryName": "Theophylline Anhydrous And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920814",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019826",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "THEOPHYLLINE ANHYDROUS; DEXTROSE MONOHYDRATE",
"StrengthNumber": "80; 5",
"StrengthUnit": "mg/100mL; g/100mL",
"Pharm_Classes": "Methylxanthine [EPC],Xanthines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Theophylline in 5% Dextrose Injection USP is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.",
"Description": "Theophylline in 5% Dextrose Injection USP is sterile, nonpyrogenic solution intended for intravenous administration, prepared from theophylline and dextrose in Water for Injection USP. Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1, 3-dimethyl-, and is represented by the following structural formula:. The formulas of the active ingredients are. The molecular formula of anhydrous theophylline is C7H8N4O2 with a molecular weight of 180.17. The molecular formula of hydrous dextrose is C6H12O6H2O with a molecular weight of 198.17. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0143-9554-01",
"PackageDescription": "1 VIAL in 1 BOX (0143-9554-01) > 10 mL in 1 VIAL",
"NDC11Code": "00143-9554-01",
"ProductNDC": "0143-9554",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin Calcium",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19880328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089717",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Folate Analog [EPC], Folic Acid [CS]",
"Status": "Active",
"LastUpdate": "2022-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880328",
"SamplePackage": "N",
"IndicationAndUsage": "Leucovorin Calcium, USP rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin Calcium, USP is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin Calcium, USP is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin Calcium, USP is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.",
"Description": "Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[p-[[[(6RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W.=511.51. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, and 350 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. In each dosage form, one milligram of leucovorin calcium, USP contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, added to adjust tonicity. Sodium hydroxide and/or hydrochloric acid may be added for pH adjustment. pH adjusted to 7.0 to 8.5. Reconstitute with Bacteriostatic Water for Injection, which contains benzyl alcohol (see WARNINGS section), or with Sterile Water for Injection."
},
{
"NDCCode": "68788-9554-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (68788-9554-1)",
"NDC11Code": "68788-9554-01",
"ProductNDC": "68788-9554",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131003",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-04-23",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0054-0264-24",
"PackageDescription": "10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER",
"NDC11Code": "00054-0264-24",
"ProductNDC": "0054-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0264-1933-10",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-1933-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-1933-10",
"ProductNDC": "0264-1933",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trophamine",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Cysteine Hydrochloride, Histidine, Tyrosine, N-acetyl-tyrosine, Alanine, Arginine, Proline, Serine, Glycine, Aspartic Acid, Glutamic Acid, And Taurine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201027",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019018",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; CYSTEINE HYDROCHLORIDE; HISTIDINE; TYROSINE; ACETYL L-TYROSINE; ALANINE; ARGININE; PROLINE; SERINE; GLYCINE; ASPARTIC ACID; GLUTAMIC ACID; TAURINE",
"StrengthNumber": ".82; 1.4; 1.2; .34; .48; .42; .2; .78; .024; .48; .044; .24; .54; 1.2; .68; .38; .36; .32; .5; .025",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201027",
"SamplePackage": "N",
"IndicationAndUsage": "TrophAmine® is indicated for the nutritional support of infants (including those of low birth weight) and young pediatric patients requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with TrophAmine® is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young pediatric patients where (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance. See WARNINGS, PRECAUTIONS, Pediatric Use, AND DOSAGE AND ADMINISTRATION.",
"Description": "TrophAmine® (10% Amino Acid Injection) is a sterile, nonpyrogenic, hypertonic solution containing crystalline amino acids. All amino acids designated USP are the “L”-isomer with the exception of Glycine USP, which does not have an isomer. Each 100 mL contains."
},
{
"NDCCode": "0264-1940-10",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-1940-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-1940-10",
"ProductNDC": "0264-1940",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19780321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085870",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "14.9",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-04-22"
},
{
"NDCCode": "0264-1945-10",
"PackageDescription": "500 mL in 1 BAG (0264-1945-10) ",
"NDC11Code": "00264-1945-10",
"ProductNDC": "0264-1945",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balanced Salt",
"NonProprietaryName": "Sodium Chloride, Potassium Chloride, Calcium Chloride, Magnesium Chloride, Sodium Acetate, And Sodium Citrate",
"DosageFormName": "SOLUTION",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20220128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091387",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM ACETATE; SODIUM CITRATE",
"StrengthNumber": "6.4; .75; .48; .3; 3.9; 1.7",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2024-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220128",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an extraocular and intraocular irrigating solution during ocular surgical procedure involving perfusion of the eye with an expected maximum duration of less than 60 minutes.",
"Description": "Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution in 500 mL single-dose EXCEL® flexible containers. Each mL contains sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl2·2H2O) 0.048%, magnesium chloride hexahydrate (MgCl2·6H2O) 0.03%, sodium acetate trihydrate (C2H3NaO2·3H2O) 0.39%, sodium citrate dihydrate (C6H5Na3O7·2H2O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg. The EXCEL® plastic container is made from a multilayered film. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-1965-10",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-1965-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-1965-10",
"ProductNDC": "0264-1965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hespan",
"NonProprietaryName": "Hetastarch In Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19910404",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN890105",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HETASTARCH; SODIUM CHLORIDE",
"StrengthNumber": "6; .9",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Intravascular Volume [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Plasma Volume Expander [EPC], Starch [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19910404",
"SamplePackage": "N",
"IndicationAndUsage": "HESPAN® is indicated in the treatment of hypovolemia when plasma volume expansion is desired in settings where adequate alternative treatment is unavailable. It is not a substitute for blood or plasma. The adjunctive use of HESPAN® in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.",
"Description": "HESPAN® (6% hetastarch in 0.9% sodium chloride injection) is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains. Hetastarch.................................................. 6 g. Sodium Chloride, USP............................... 0.9 g. Water for Injection, USP............................. qs. pH adjusted with Sodium Hydroxide, NF if necessary. Concentration of Electrolytes (mEq/L): Sodium 154, Chloride 154. pH: approximately 5.9 with negligible buffering capacity. Calc. Osmolarity: approximately 309 mOsM. Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 600,000 with a range of 450,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,600,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2 and R3 are H or CH2CH2OH and R6 is H, CH2CH2OH, or a branching point in the starch polymer connected through an α-1,6 link to additional D-glucopyranosyl units. HESPAN® is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multi-layered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-1968-10",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-1968-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-1968-10",
"ProductNDC": "0264-1968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyethyl Starch In Sodium Chloride",
"NonProprietaryName": "Hydroxyethyl Starch In Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "BA110013",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HYDROXYETHYL STARCH 130/0.4; SODIUM CHLORIDE",
"StrengthNumber": "6; 900",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Plasma Volume Expander [EPC],Increased Intravascular Volume [PE],Osmotic Activity [MoA],Starch [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20150109",
"SamplePackage": "N"
},
{
"NDCCode": "0264-2101-10",
"PackageDescription": "16 CONTAINER in 1 CASE (0264-2101-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-2101-10",
"ProductNDC": "0264-2101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19700910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016734",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2023-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19700910",
"SamplePackage": "N",
"IndicationAndUsage": "Sterile Water for Irrigation USP is indicated for use as an irrigating fluid or pharmaceutic aid. Sterile Water may also be used as an adjunct in the preparation of non-intravenously administered nutrient mixtures (see DOSAGE AND ADMINISTRATION).",
"Description": "Sterile Water for Irrigation USP is a sterile, hypotonic, nonpyrogenic irrigating fluid or pharmaceutic aid (solvent) entirely composed of Sterile Water for Injection USP. It is prepared by distillation and contains no antimicrobial or bacteriostatic agents or added buffers. The pH is 5.7 (5.0–7.0). The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber Latex, PVC or DEHP."
},
{
"NDCCode": "0264-2201-10",
"PackageDescription": "16 CONTAINER in 1 CASE (0264-2201-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-2201-10",
"ProductNDC": "0264-2201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20090914",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016733",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".9",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090914",
"SamplePackage": "N",
"IndicationAndUsage": "0.9% Sodium Chloride Irrigation USP is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.",
"Description": "Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber latex, PVC or DEHP. Bottle may exhibit some discoloration upon storage which does not impact product quality."
},
{
"NDCCode": "0264-2304-10",
"PackageDescription": "16 CONTAINER in 1 CASE (0264-2304-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-2304-10",
"ProductNDC": "0264-2304",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetic Acid",
"NonProprietaryName": "Acetic Acid",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19790806",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018161",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "ACETIC ACID",
"StrengthNumber": ".25",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2023-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19790806",
"SamplePackage": "N",
"IndicationAndUsage": "0.25% Acetic Acid Irrigation USP is indicated as a constant or intermittent bladder rinse to help prevent the growth and proliferation of susceptible urinary pathogens (especially ammonia-forming bacteria) in the management of patients who require prolonged placement of an indwelling urethral catheter. It also may be used for periodic irrigation of an indwelling catheter to help maintain patency by reducing the formation of calcium encrustations.",
"Description": "Each 100 mL contains: Glacial Acetic Acid USP 0.25 g Water for Injection USP qs. pH: 3.1 (2.8-3.4) Calculated Osmolarity: 42 mOsmol/liter. The formula of the active ingredient is. 0.25% Acetic Acid Irrigation USP is a prediluted, sterile, nonpyrogenic aqueous solution suitable for urologic irrigation. It contains no preservatives or added buffers. The solution is hypotonic. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber latex, PVC or DEHP."
},
{
"NDCCode": "0264-2514-10",
"PackageDescription": "500 mL in 1 BOTTLE, GLASS (0264-2514-10) ",
"NDC11Code": "00264-2514-10",
"ProductNDC": "0264-2514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balanced Salt",
"NonProprietaryName": "Sodium Chloride, Potassium Chloride, Calcium Chloride, Magnesium Chloride, Sodium Acetate, And Sodium Citrate",
"DosageFormName": "SOLUTION",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091387",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CALCIUM CHLORIDE; MAGNESIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM ACETATE; SODIUM CHLORIDE; SODIUM CITRATE",
"StrengthNumber": ".48; .3; .75; 3.9; 6.4; 1.7",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an extraocular and intraocular irrigating solution during ocular surgical procedure involving perfusion of the eye with an expected maximum duration of less than 60 minutes.",
"Description": "Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution, each mL containing sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl2·2H2O) 0.048%, magnesium chloride hexahydrate (MgCl2·6H2O) 0.03%, sodium acetate trihydrate (C2H3NaO2·3H2O) 0.39%, sodium citrate dihydrate (C6H5Na3O7·2H2O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg."
},
{
"NDCCode": "0264-3301-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-3301-10",
"ProductNDC": "0264-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250718",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-4460-10",
"PackageDescription": "12 CARTON in 1 CASE (0264-4460-10) / 1 CONTAINER in 1 CARTON / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-4460-10",
"ProductNDC": "0264-4460",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nutrilipid I.v. Fat Emulsion",
"NonProprietaryName": "Soybean Oil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019531",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140630",
"SamplePackage": "N",
"IndicationAndUsage": "Nutrilipid® 20% is indicated as a source of calories and essential fatty acids for parenteral nutrition and as a source of essential fatty acids when a deficiency occurs when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Nutrilipid 20% is a homogenous white and milky sterile, nonpyrogenic lipid emulsion for intravenous administration. Each 100 mL of Nutrilipid 20% contains: Soybean Oil 20 g; Egg Yolk Phospholipid 1.2 g; Glycerin USP (glycerol) 2.5 g; Sodium Oleate 0.03 g; Water for Injection USP qs. pH adjusted with Sodium Hydroxide NF. pH: 6.8 (6.0-8.9); Osmolality: 390 mOsmol/kg (actual). Contains emulsified fat particles averaging approximately 0.26 micron in diameter, similar to naturally occurring chylomicrons. The total caloric value, including fat, phospholipid, and glycerol is 2.0 Kcal per mL. Soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (48% - 58%), oleic (17% - 30%), palmitic (9% -13%), linolenic (4% - 11%), and stearic (2.5% - 5.0%). These fatty acids have the folIowing chemical and structural formulas. Egg yolk phospholipids are a mixture of naturally occurring phospholipids isolated from egg yolk. Glycerol is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It is added to adjust tonicity. Not made with natural rubber latex, PVC or DEHP. Drug product contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0264-4850-01",
"PackageDescription": "10 VIAL in 1 CARTON (0264-4850-01) > 100 mL in 1 VIAL",
"NDC11Code": "00264-4850-01",
"ProductNDC": "0264-4850",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol Lipuro",
"NonProprietaryName": "Propofol Lipuro",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210312",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210312",
"SamplePackage": "N"
},
{
"NDCCode": "0264-5705-10",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0264-5705-10) > 1 SYRINGE in 1 BLISTER PACK (0264-5705-05) > .5 mL in 1 SYRINGE",
"NDC11Code": "00264-5705-10",
"ProductNDC": "0264-5705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208827",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/.5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection, USP is indicated for: 1 Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;, 2 Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery who are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);, 3 Prophylaxis and treatment of pulmonary embolism;, 4 Atrial fibrillation with embolization;, 5 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 6 Prevention of clotting in arterial and cardiac surgery;, 7 Prophylaxis and treatment of peripheral arterial embolism;, 8 Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6- sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Structural formula of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for use as an anticoagulant. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each mL contains 10,000 USP units heparin sodium, in water for injection, and hydrochloric acid or sodium hydroxide for pH adjustment. The pH range is 5.0 to 7.5."
},
{
"NDCCode": "0264-5711-10",
"PackageDescription": "30 BOX in 1 CASE (0264-5711-10) / 10 SYRINGE in 1 BOX / 5 mL in 1 SYRINGE (0264-5711-01) ",
"NDC11Code": "00264-5711-10",
"ProductNDC": "0264-5711",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260521",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219108",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260521",
"SamplePackage": "N",
"IndicationAndUsage": "ROCURONIUM BROMIDE INJECTION is indicated as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "ROCURONIUM BROMIDE INJECTION is a nondepolarizing neuromuscular blocking agent. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The molecular formula is C32H53BrN2O4 and its molecular weight is 609.70 g/mol. The structural formula is. Rocuronium bromide is an almost white to pale yellow, hygroscopic powder. It is soluble in water and dichloromethane, slightly soluble in ethanol and methanol. It has a partition coefficient of 0.5 at 20°C. ROCURONIUM BROMIDE INJECTION is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellowish in single-dose luer-lock prefilled glass syringes, for intravenous use only. Each mL contains 10 mg rocuronium bromide (equivalent to 8.7 mg of rocuronium) and the following inactive ingredients: 25 mg of gluconolactone, 5 mg sodium acetate trihydrate, 5 mg sodium citrate dihydrate in water for injection. The formulation has a pH of 3.8 – 4.2."
},
{
"NDCCode": "0264-5802-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-5802-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-5802-10",
"ProductNDC": "0264-5802",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19980309",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019635",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".9",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220126",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes and water for hydration. 0.9% Sodium Chloride Injection USP is indicated for extracellular fluid replacement, treatment of metabolic alkalosis in the presence of fluid loss and mild sodium depletion. 0.9% Sodium Chloride Injection USP is also indicated for use as a priming solution in hemodialysis procedures and may be used to initiate and terminate blood transfusions without hemolyzing red blood cells. 0.45% Sodium Chloride Injection USP is primarily a hydrating solution and may be used to assess the status of the kidneys, since more water is provided than is required for excretion of salt. It may also be used in the treatment of hyperosmolar diabetes where the use of dextrose is inadvisable and there is a need for large amounts of fluid without an excess of sodium ions. Sodium Chloride Injections USP are also indicated as pharmaceutic aids and diluents for the infusion of compatible drug additives. Refer to prescribing information accompanying additive drugs.",
"Description": "Each 100 mL of 0.9% Sodium Chloride Injection USP contains. Sodium Chloride USP 0.9 g; Water for Injection USP qspH: 5.6 (4.5–7.0) Calculated Osmolarity: 308 mOsmol/literpH adjusted with Hydrochloric Acid NFConcentration of Electrolytes (mEq/liter): Sodium 154 Chloride 154. Each 100 mL of 0.45% Sodium Chloride Injection USP contains. Sodium Chloride USP 0.45 g; Water for Injection USP qspH: 5.6 (4.5–7.0) Calculated Osmolarity: 154 mOsmol/liter, hypotonicpH adjusted with Hydrochloric Acid NFConcentration of Electrolytes (mEq/liter): Sodium 77 Chloride 77. Sodium Chloride Injections USP are sterile, nonpyrogenic, isotonic and contain no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7055-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0264-7055-10) > 5 mL in 1 AMPULE (0264-7055-05) ",
"NDC11Code": "00264-7055-10",
"ProductNDC": "0264-7055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clorotekal",
"NonProprietaryName": "Chloroprocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20180501",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208791",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CHLOROPROCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180501",
"SamplePackage": "N",
"IndicationAndUsage": "CLOROTEKAL® (chloroprocaine hydrochloride) is indicated for intrathecal injection for the production of subarachnoid block (spinal anesthesia) in adults undergoing surgical procedures. Indicated procedures include those suitable for CLOROTEKAL®'s short duration of action.",
"Description": "CLOROTEKAL® is a sterile non pyrogenic local anesthetic. The active ingredient in CLOROTEKAL® is chloroprocaine hydrochloride (benzoic acid, 4-amino-2-chloro-2-(diethylamino) ethyl ester, monohydrochloride), an ester local anesthetic, which is represented by the following structural formula. 1 mL of solution for injection contains 10 mg of chloroprocaine hydrochloride, equivalent to 44.05 mg/5 mL (8.81 mg/mL) chloroprocaine. It also contains the following inactive ingredients: hydrochloric acid 1N (for pH adjustment), sodium chloride, water for injection. The pH of the solution is between 3.0 and 4.0. The osmolality of the solution is 270 – 300 mOsm/kg."
},
{
"NDCCode": "0264-7500-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7500-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7500-10",
"ProductNDC": "0264-7500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, And Calcium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019632",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CALCIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE",
"StrengthNumber": ".02; .03; .6; .31",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230301",
"SamplePackage": "N",
"IndicationAndUsage": "Lactated Ringer’s Injection is indicated for use as a source of water and electrolytes or as an alkalinizing agent in adults and pediatric patients.",
"Description": "Lactated Ringer’s Injection USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in a single-dose container intended for intravenous administration. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Table 1. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. Table 2. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film developed for parenteral drugs. It contains no plasticizers and has minimal leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident foil cover and the other is a medication addition site [see Dosage and Administration (2.3)]."
},
{
"NDCCode": "0264-7510-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7510-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7510-10",
"ProductNDC": "0264-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019626",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880202",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.",
"Description": "Each 100 mL of 5% Dextrose Injection USP contains:Hydrous Dextrose USP 5 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 250 mOsmol/literCalories per liter: 170. Each 100 mL of 10% Dextrose Injection USP contains:Hydrous Dextrose USP 10 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 505 mOsmol/liter, hypertonicCalories per liter: 340. Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7520-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7520-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7520-10",
"ProductNDC": "0264-7520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019626",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880202",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.",
"Description": "Each 100 mL of 5% Dextrose Injection USP contains:Hydrous Dextrose USP 5 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 250 mOsmol/literCalories per liter: 170. Each 100 mL of 10% Dextrose Injection USP contains:Hydrous Dextrose USP 10 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 505 mOsmol/liter, hypertonicCalories per liter: 340. Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7578-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7578-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7578-10",
"ProductNDC": "0264-7578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mannitol",
"NonProprietaryName": "Mannitol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19930726",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020006",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "MANNITOL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Diuresis [PE], Osmotic Activity [MoA], Osmotic Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19930726",
"SamplePackage": "N",
"IndicationAndUsage": "Mannitol Injection is indicated for: 1 Reduction of intracranial pressure and treatment of cerebral edema., 2 Reduction of elevated intraocular pressure.",
"Description": "Mannitol Injection 20%, USP is a sterile, nonpyrogenic solution of Mannitol, USP in 250 mL and 500 mL single-dose EXCEL® flexible containers for intravenous administration as an osmotic diuretic. It contains no antimicrobial agents. Mannitol is a six-carbon sugar alcohol prepared commercially by the reduction of dextrose. Each 100 mL contains. Mannitol USP 20 g; Water for Injection USP qs. pH: 5.3 (4.5-7.0); Calculated Osmolarity 1100 mOsmol/liter. Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. The formula of the active ingredient is. The EXCEL® plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a rubberized copolymer of ethylene and propylene. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0264-7605-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7605-10) > 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7605-10",
"ProductNDC": "0264-7605",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE; SODIUM CHLORIDE",
"StrengthNumber": "2.5; .45",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-05-23"
},
{
"NDCCode": "0264-7608-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7608-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7608-10",
"ProductNDC": "0264-7608",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE",
"StrengthNumber": "3.3; .3",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880224",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.",
"Description": "(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7610-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7610-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7610-10",
"ProductNDC": "0264-7610",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE",
"StrengthNumber": "5; .9",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880224",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.",
"Description": "(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7612-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7612-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7612-10",
"ProductNDC": "0264-7612",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE",
"StrengthNumber": "5; .45",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880224",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.",
"Description": "(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7614-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7614-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7614-10",
"ProductNDC": "0264-7614",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE",
"StrengthNumber": "5; .33",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880224",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.",
"Description": "(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7616-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7616-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7616-10",
"ProductNDC": "0264-7616",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19880224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019631",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE",
"StrengthNumber": "5; .2",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880224",
"SamplePackage": "N",
"IndicationAndUsage": "These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.",
"Description": "(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0264-9554-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-9554-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9554-10</NDC11Code>
<ProductNDC>0264-9554</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Theophylline In Dextrose</ProprietaryName>
<NonProprietaryName>Theophylline Anhydrous And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920814</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019826</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>THEOPHYLLINE ANHYDROUS; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>80; 5</StrengthNumber>
<StrengthUnit>mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Methylxanthine [EPC],Xanthines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Theophylline in 5% Dextrose Injection USP is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
<Description>Theophylline in 5% Dextrose Injection USP is sterile, nonpyrogenic solution intended for intravenous administration, prepared from theophylline and dextrose in Water for Injection USP. Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1, 3-dimethyl-, and is represented by the following structural formula:. The formulas of the active ingredients are. The molecular formula of anhydrous theophylline is C7H8N4O2 with a molecular weight of 180.17. The molecular formula of hydrous dextrose is C6H12O6H2O with a molecular weight of 198.17. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0143-9554-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (0143-9554-01) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9554-01</NDC11Code>
<ProductNDC>0143-9554</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin Calcium</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19880328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089717</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leucovorin Calcium, USP rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin Calcium, USP is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin Calcium, USP is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin Calcium, USP is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
<Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[p-[[[(6RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W.=511.51. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, and 350 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. In each dosage form, one milligram of leucovorin calcium, USP contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, added to adjust tonicity. Sodium hydroxide and/or hydrochloric acid may be added for pH adjustment. pH adjusted to 7.0 to 8.5. Reconstitute with Bacteriostatic Water for Injection, which contains benzyl alcohol (see WARNINGS section), or with Sterile Water for Injection.</Description>
</NDC>
<NDC>
<NDCCode>68788-9554-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (68788-9554-1)</PackageDescription>
<NDC11Code>68788-9554-01</NDC11Code>
<ProductNDC>68788-9554</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131003</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-23</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0054-0264-24</NDCCode>
<PackageDescription>10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER</PackageDescription>
<NDC11Code>00054-0264-24</NDC11Code>
<ProductNDC>0054-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0264-1933-10</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-1933-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1933-10</NDC11Code>
<ProductNDC>0264-1933</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trophamine</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Cysteine Hydrochloride, Histidine, Tyrosine, N-acetyl-tyrosine, Alanine, Arginine, Proline, Serine, Glycine, Aspartic Acid, Glutamic Acid, And Taurine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201027</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019018</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; CYSTEINE HYDROCHLORIDE; HISTIDINE; TYROSINE; ACETYL L-TYROSINE; ALANINE; ARGININE; PROLINE; SERINE; GLYCINE; ASPARTIC ACID; GLUTAMIC ACID; TAURINE</SubstanceName>
<StrengthNumber>.82; 1.4; 1.2; .34; .48; .42; .2; .78; .024; .48; .044; .24; .54; 1.2; .68; .38; .36; .32; .5; .025</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TrophAmine® is indicated for the nutritional support of infants (including those of low birth weight) and young pediatric patients requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with TrophAmine® is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young pediatric patients where (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance. See WARNINGS, PRECAUTIONS, Pediatric Use, AND DOSAGE AND ADMINISTRATION.</IndicationAndUsage>
<Description>TrophAmine® (10% Amino Acid Injection) is a sterile, nonpyrogenic, hypertonic solution containing crystalline amino acids. All amino acids designated USP are the “L”-isomer with the exception of Glycine USP, which does not have an isomer. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0264-1940-10</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-1940-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1940-10</NDC11Code>
<ProductNDC>0264-1940</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19780321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085870</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>14.9</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-04-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>0264-1945-10</NDCCode>
<PackageDescription>500 mL in 1 BAG (0264-1945-10) </PackageDescription>
<NDC11Code>00264-1945-10</NDC11Code>
<ProductNDC>0264-1945</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balanced Salt</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Potassium Chloride, Calcium Chloride, Magnesium Chloride, Sodium Acetate, And Sodium Citrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20220128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091387</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM ACETATE; SODIUM CITRATE</SubstanceName>
<StrengthNumber>6.4; .75; .48; .3; 3.9; 1.7</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an extraocular and intraocular irrigating solution during ocular surgical procedure involving perfusion of the eye with an expected maximum duration of less than 60 minutes.</IndicationAndUsage>
<Description>Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution in 500 mL single-dose EXCEL® flexible containers. Each mL contains sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl2·2H2O) 0.048%, magnesium chloride hexahydrate (MgCl2·6H2O) 0.03%, sodium acetate trihydrate (C2H3NaO2·3H2O) 0.39%, sodium citrate dihydrate (C6H5Na3O7·2H2O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg. The EXCEL® plastic container is made from a multilayered film. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-1965-10</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-1965-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1965-10</NDC11Code>
<ProductNDC>0264-1965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hespan</ProprietaryName>
<NonProprietaryName>Hetastarch In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19910404</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN890105</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HETASTARCH; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>6; .9</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Intravascular Volume [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Plasma Volume Expander [EPC], Starch [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HESPAN® is indicated in the treatment of hypovolemia when plasma volume expansion is desired in settings where adequate alternative treatment is unavailable. It is not a substitute for blood or plasma. The adjunctive use of HESPAN® in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.</IndicationAndUsage>
<Description>HESPAN® (6% hetastarch in 0.9% sodium chloride injection) is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains. Hetastarch.................................................. 6 g. Sodium Chloride, USP............................... 0.9 g. Water for Injection, USP............................. qs. pH adjusted with Sodium Hydroxide, NF if necessary. Concentration of Electrolytes (mEq/L): Sodium 154, Chloride 154. pH: approximately 5.9 with negligible buffering capacity. Calc. Osmolarity: approximately 309 mOsM. Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 600,000 with a range of 450,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,600,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2 and R3 are H or CH2CH2OH and R6 is H, CH2CH2OH, or a branching point in the starch polymer connected through an α-1,6 link to additional D-glucopyranosyl units. HESPAN® is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multi-layered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-1968-10</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-1968-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1968-10</NDC11Code>
<ProductNDC>0264-1968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyethyl Starch In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Hydroxyethyl Starch In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>BA110013</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HYDROXYETHYL STARCH 130/0.4; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>6; 900</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Plasma Volume Expander [EPC],Increased Intravascular Volume [PE],Osmotic Activity [MoA],Starch [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0264-2101-10</NDCCode>
<PackageDescription>16 CONTAINER in 1 CASE (0264-2101-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-2101-10</NDC11Code>
<ProductNDC>0264-2101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19700910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016734</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19700910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sterile Water for Irrigation USP is indicated for use as an irrigating fluid or pharmaceutic aid. Sterile Water may also be used as an adjunct in the preparation of non-intravenously administered nutrient mixtures (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Sterile Water for Irrigation USP is a sterile, hypotonic, nonpyrogenic irrigating fluid or pharmaceutic aid (solvent) entirely composed of Sterile Water for Injection USP. It is prepared by distillation and contains no antimicrobial or bacteriostatic agents or added buffers. The pH is 5.7 (5.0–7.0). The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber Latex, PVC or DEHP.</Description>
</NDC>
<NDC>
<NDCCode>0264-2201-10</NDCCode>
<PackageDescription>16 CONTAINER in 1 CASE (0264-2201-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-2201-10</NDC11Code>
<ProductNDC>0264-2201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20090914</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016733</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.9</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>0.9% Sodium Chloride Irrigation USP is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
<Description>Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber latex, PVC or DEHP. Bottle may exhibit some discoloration upon storage which does not impact product quality.</Description>
</NDC>
<NDC>
<NDCCode>0264-2304-10</NDCCode>
<PackageDescription>16 CONTAINER in 1 CASE (0264-2304-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-2304-10</NDC11Code>
<ProductNDC>0264-2304</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetic Acid</ProprietaryName>
<NonProprietaryName>Acetic Acid</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19790806</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018161</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>ACETIC ACID</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>0.25% Acetic Acid Irrigation USP is indicated as a constant or intermittent bladder rinse to help prevent the growth and proliferation of susceptible urinary pathogens (especially ammonia-forming bacteria) in the management of patients who require prolonged placement of an indwelling urethral catheter. It also may be used for periodic irrigation of an indwelling catheter to help maintain patency by reducing the formation of calcium encrustations.</IndicationAndUsage>
<Description>Each 100 mL contains: Glacial Acetic Acid USP 0.25 g Water for Injection USP qs. pH: 3.1 (2.8-3.4) Calculated Osmolarity: 42 mOsmol/liter. The formula of the active ingredient is. 0.25% Acetic Acid Irrigation USP is a prediluted, sterile, nonpyrogenic aqueous solution suitable for urologic irrigation. It contains no preservatives or added buffers. The solution is hypotonic. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. Not made with natural rubber latex, PVC or DEHP.</Description>
</NDC>
<NDC>
<NDCCode>0264-2514-10</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE, GLASS (0264-2514-10) </PackageDescription>
<NDC11Code>00264-2514-10</NDC11Code>
<ProductNDC>0264-2514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balanced Salt</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Potassium Chloride, Calcium Chloride, Magnesium Chloride, Sodium Acetate, And Sodium Citrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091387</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CALCIUM CHLORIDE; MAGNESIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM ACETATE; SODIUM CHLORIDE; SODIUM CITRATE</SubstanceName>
<StrengthNumber>.48; .3; .75; 3.9; 6.4; 1.7</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an extraocular and intraocular irrigating solution during ocular surgical procedure involving perfusion of the eye with an expected maximum duration of less than 60 minutes.</IndicationAndUsage>
<Description>Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution, each mL containing sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl2·2H2O) 0.048%, magnesium chloride hexahydrate (MgCl2·6H2O) 0.03%, sodium acetate trihydrate (C2H3NaO2·3H2O) 0.39%, sodium citrate dihydrate (C6H5Na3O7·2H2O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg.</Description>
</NDC>
<NDC>
<NDCCode>0264-3301-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3301-10</NDC11Code>
<ProductNDC>0264-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-4460-10</NDCCode>
<PackageDescription>12 CARTON in 1 CASE (0264-4460-10) / 1 CONTAINER in 1 CARTON / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-4460-10</NDC11Code>
<ProductNDC>0264-4460</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nutrilipid I.v. Fat Emulsion</ProprietaryName>
<NonProprietaryName>Soybean Oil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140630</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019531</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nutrilipid® 20% is indicated as a source of calories and essential fatty acids for parenteral nutrition and as a source of essential fatty acids when a deficiency occurs when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Nutrilipid 20% is a homogenous white and milky sterile, nonpyrogenic lipid emulsion for intravenous administration. Each 100 mL of Nutrilipid 20% contains: Soybean Oil 20 g; Egg Yolk Phospholipid 1.2 g; Glycerin USP (glycerol) 2.5 g; Sodium Oleate 0.03 g; Water for Injection USP qs. pH adjusted with Sodium Hydroxide NF. pH: 6.8 (6.0-8.9); Osmolality: 390 mOsmol/kg (actual). Contains emulsified fat particles averaging approximately 0.26 micron in diameter, similar to naturally occurring chylomicrons. The total caloric value, including fat, phospholipid, and glycerol is 2.0 Kcal per mL. Soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (48% - 58%), oleic (17% - 30%), palmitic (9% -13%), linolenic (4% - 11%), and stearic (2.5% - 5.0%). These fatty acids have the folIowing chemical and structural formulas. Egg yolk phospholipids are a mixture of naturally occurring phospholipids isolated from egg yolk. Glycerol is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It is added to adjust tonicity. Not made with natural rubber latex, PVC or DEHP. Drug product contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0264-4850-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0264-4850-01) > 100 mL in 1 VIAL</PackageDescription>
<NDC11Code>00264-4850-01</NDC11Code>
<ProductNDC>0264-4850</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol Lipuro</ProprietaryName>
<NonProprietaryName>Propofol Lipuro</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210312</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0264-5705-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0264-5705-10) > 1 SYRINGE in 1 BLISTER PACK (0264-5705-05) > .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00264-5705-10</NDC11Code>
<ProductNDC>0264-5705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208827</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/.5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection, USP is indicated for: 1 Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;, 2 Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery who are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);, 3 Prophylaxis and treatment of pulmonary embolism;, 4 Atrial fibrillation with embolization;, 5 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 6 Prevention of clotting in arterial and cardiac surgery;, 7 Prophylaxis and treatment of peripheral arterial embolism;, 8 Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6- sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Structural formula of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for use as an anticoagulant. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each mL contains 10,000 USP units heparin sodium, in water for injection, and hydrochloric acid or sodium hydroxide for pH adjustment. The pH range is 5.0 to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0264-5711-10</NDCCode>
<PackageDescription>30 BOX in 1 CASE (0264-5711-10) / 10 SYRINGE in 1 BOX / 5 mL in 1 SYRINGE (0264-5711-01) </PackageDescription>
<NDC11Code>00264-5711-10</NDC11Code>
<ProductNDC>0264-5711</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260521</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219108</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ROCURONIUM BROMIDE INJECTION is indicated as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>ROCURONIUM BROMIDE INJECTION is a nondepolarizing neuromuscular blocking agent. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The molecular formula is C32H53BrN2O4 and its molecular weight is 609.70 g/mol. The structural formula is. Rocuronium bromide is an almost white to pale yellow, hygroscopic powder. It is soluble in water and dichloromethane, slightly soluble in ethanol and methanol. It has a partition coefficient of 0.5 at 20°C. ROCURONIUM BROMIDE INJECTION is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellowish in single-dose luer-lock prefilled glass syringes, for intravenous use only. Each mL contains 10 mg rocuronium bromide (equivalent to 8.7 mg of rocuronium) and the following inactive ingredients: 25 mg of gluconolactone, 5 mg sodium acetate trihydrate, 5 mg sodium citrate dihydrate in water for injection. The formulation has a pH of 3.8 – 4.2.</Description>
</NDC>
<NDC>
<NDCCode>0264-5802-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-5802-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-5802-10</NDC11Code>
<ProductNDC>0264-5802</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19980309</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019635</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.9</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes and water for hydration. 0.9% Sodium Chloride Injection USP is indicated for extracellular fluid replacement, treatment of metabolic alkalosis in the presence of fluid loss and mild sodium depletion. 0.9% Sodium Chloride Injection USP is also indicated for use as a priming solution in hemodialysis procedures and may be used to initiate and terminate blood transfusions without hemolyzing red blood cells. 0.45% Sodium Chloride Injection USP is primarily a hydrating solution and may be used to assess the status of the kidneys, since more water is provided than is required for excretion of salt. It may also be used in the treatment of hyperosmolar diabetes where the use of dextrose is inadvisable and there is a need for large amounts of fluid without an excess of sodium ions. Sodium Chloride Injections USP are also indicated as pharmaceutic aids and diluents for the infusion of compatible drug additives. Refer to prescribing information accompanying additive drugs.</IndicationAndUsage>
<Description>Each 100 mL of 0.9% Sodium Chloride Injection USP contains. Sodium Chloride USP 0.9 g; Water for Injection USP qspH: 5.6 (4.5–7.0) Calculated Osmolarity: 308 mOsmol/literpH adjusted with Hydrochloric Acid NFConcentration of Electrolytes (mEq/liter): Sodium 154 Chloride 154. Each 100 mL of 0.45% Sodium Chloride Injection USP contains. Sodium Chloride USP 0.45 g; Water for Injection USP qspH: 5.6 (4.5–7.0) Calculated Osmolarity: 154 mOsmol/liter, hypotonicpH adjusted with Hydrochloric Acid NFConcentration of Electrolytes (mEq/liter): Sodium 77 Chloride 77. Sodium Chloride Injections USP are sterile, nonpyrogenic, isotonic and contain no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7055-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0264-7055-10) > 5 mL in 1 AMPULE (0264-7055-05) </PackageDescription>
<NDC11Code>00264-7055-10</NDC11Code>
<ProductNDC>0264-7055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clorotekal</ProprietaryName>
<NonProprietaryName>Chloroprocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20180501</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208791</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CHLOROPROCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLOROTEKAL® (chloroprocaine hydrochloride) is indicated for intrathecal injection for the production of subarachnoid block (spinal anesthesia) in adults undergoing surgical procedures. Indicated procedures include those suitable for CLOROTEKAL®'s short duration of action.</IndicationAndUsage>
<Description>CLOROTEKAL® is a sterile non pyrogenic local anesthetic. The active ingredient in CLOROTEKAL® is chloroprocaine hydrochloride (benzoic acid, 4-amino-2-chloro-2-(diethylamino) ethyl ester, monohydrochloride), an ester local anesthetic, which is represented by the following structural formula. 1 mL of solution for injection contains 10 mg of chloroprocaine hydrochloride, equivalent to 44.05 mg/5 mL (8.81 mg/mL) chloroprocaine. It also contains the following inactive ingredients: hydrochloric acid 1N (for pH adjustment), sodium chloride, water for injection. The pH of the solution is between 3.0 and 4.0. The osmolality of the solution is 270 – 300 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>0264-7500-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7500-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7500-10</NDC11Code>
<ProductNDC>0264-7500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, And Calcium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019632</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CALCIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE</SubstanceName>
<StrengthNumber>.02; .03; .6; .31</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lactated Ringer’s Injection is indicated for use as a source of water and electrolytes or as an alkalinizing agent in adults and pediatric patients.</IndicationAndUsage>
<Description>Lactated Ringer’s Injection USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in a single-dose container intended for intravenous administration. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Table 1. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. Table 2. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film developed for parenteral drugs. It contains no plasticizers and has minimal leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident foil cover and the other is a medication addition site [see Dosage and Administration (2.3)].</Description>
</NDC>
<NDC>
<NDCCode>0264-7510-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7510-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7510-10</NDC11Code>
<ProductNDC>0264-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019626</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.</IndicationAndUsage>
<Description>Each 100 mL of 5% Dextrose Injection USP contains:Hydrous Dextrose USP 5 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 250 mOsmol/literCalories per liter: 170. Each 100 mL of 10% Dextrose Injection USP contains:Hydrous Dextrose USP 10 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 505 mOsmol/liter, hypertonicCalories per liter: 340. Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7520-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7520-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7520-10</NDC11Code>
<ProductNDC>0264-7520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019626</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.</IndicationAndUsage>
<Description>Each 100 mL of 5% Dextrose Injection USP contains:Hydrous Dextrose USP 5 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 250 mOsmol/literCalories per liter: 170. Each 100 mL of 10% Dextrose Injection USP contains:Hydrous Dextrose USP 10 g; Water for Injection USP qspH: 4.4 (3.5–6.5); Calculated Osmolarity: 505 mOsmol/liter, hypertonicCalories per liter: 340. Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formula of the active ingredient is. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7578-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7578-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7578-10</NDC11Code>
<ProductNDC>0264-7578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mannitol</ProprietaryName>
<NonProprietaryName>Mannitol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19930726</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020006</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>MANNITOL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Osmotic Activity [MoA], Osmotic Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mannitol Injection is indicated for: 1 Reduction of intracranial pressure and treatment of cerebral edema., 2 Reduction of elevated intraocular pressure.</IndicationAndUsage>
<Description>Mannitol Injection 20%, USP is a sterile, nonpyrogenic solution of Mannitol, USP in 250 mL and 500 mL single-dose EXCEL® flexible containers for intravenous administration as an osmotic diuretic. It contains no antimicrobial agents. Mannitol is a six-carbon sugar alcohol prepared commercially by the reduction of dextrose. Each 100 mL contains. Mannitol USP 20 g; Water for Injection USP qs. pH: 5.3 (4.5-7.0); Calculated Osmolarity 1100 mOsmol/liter. Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. The formula of the active ingredient is. The EXCEL® plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a rubberized copolymer of ethylene and propylene. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0264-7605-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7605-10) > 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7605-10</NDC11Code>
<ProductNDC>0264-7605</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>2.5; .45</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-05-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>0264-7608-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7608-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7608-10</NDC11Code>
<ProductNDC>0264-7608</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>3.3; .3</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.</IndicationAndUsage>
<Description>(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7610-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7610-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7610-10</NDC11Code>
<ProductNDC>0264-7610</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .9</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.</IndicationAndUsage>
<Description>(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7612-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7612-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7612-10</NDC11Code>
<ProductNDC>0264-7612</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .45</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.</IndicationAndUsage>
<Description>(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7614-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7614-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7614-10</NDC11Code>
<ProductNDC>0264-7614</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .33</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.</IndicationAndUsage>
<Description>(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7616-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7616-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7616-10</NDC11Code>
<ProductNDC>0264-7616</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19880224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019631</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .2</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes, calories and water for hydration.</IndicationAndUsage>
<Description>(See chart below for quantitative information.). Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
</NDCList>