RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>0268-0293-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0293-50) </PackageDescription>
    <NDC11Code>00268-0293-50</NDC11Code>
    <ProductNDC>0268-0293</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Bermuda Grass, Standardized</ProprietaryName>
    <NonProprietaryName>Bermuda Grass, Standardized</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19971218</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103051</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19971218</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
    <Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
  </NDC>
  <NDC>
    <NDCCode>0268-0293-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (0268-0293-10) </PackageDescription>
    <NDC11Code>00268-0293-10</NDC11Code>
    <ProductNDC>0268-0293</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Bermuda Grass, Standardized</ProprietaryName>
    <NonProprietaryName>Bermuda Grass, Standardized</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19971218</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103051</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19971218</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
    <Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
  </NDC>
  <NDC>
    <NDCCode>0268-0293-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (0268-0293-30) </PackageDescription>
    <NDC11Code>00268-0293-30</NDC11Code>
    <ProductNDC>0268-0293</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Bermuda Grass, Standardized</ProprietaryName>
    <NonProprietaryName>Bermuda Grass, Standardized</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19971218</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103051</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19971218</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
    <Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0293-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0293-5)</PackageDescription>
    <NDC11Code>49288-0293-05</NDC11Code>
    <ProductNDC>49288-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Monilia Mixture</ProprietaryName>
    <NonProprietaryName>Monilia Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-293-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (54575-293-50)</PackageDescription>
    <NDC11Code>54575-0293-50</NDC11Code>
    <ProductNDC>54575-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chicken Feathers</ProprietaryName>
    <NonProprietaryName>Gallus Gallus Feather</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>GALLUS GALLUS FEATHER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Feather Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Feathers [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-293-50</NDCCode>
    <PackageDescription>50 TABLET in 1 BOTTLE, PLASTIC (63187-293-50) </PackageDescription>
    <NDC11Code>63187-0293-50</NDC11Code>
    <ProductNDC>63187-293</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Pluspharma Extra Strength</ProprietaryName>
    <ProprietaryNameSuffix>Pain Reliever,fever Reducer 500 Mg</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060327</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part343</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the temporary relief of minor aches and pains due to:. headache. muscular aches. backache. minor pain of arthritis. the common cold. toothache. premenstrual and menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>65162-293-50</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (65162-293-50) </PackageDescription>
    <NDC11Code>65162-0293-50</NDC11Code>
    <ProductNDC>65162-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Telmisartan</ProprietaryName>
    <NonProprietaryName>Telmisartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204415</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>TELMISARTAN</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and talc. Telmisartan tablets, USP are hygroscopic and require protection from moisture.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-293-50</NDCCode>
    <PackageDescription>50 CAPSULE in 1 BOTTLE (85766-293-50) </PackageDescription>
    <NDC11Code>85766-0293-50</NDC11Code>
    <ProductNDC>85766-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin</ProprietaryName>
    <NonProprietaryName>Amoxicillin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19900930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061926</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>AMOXICILLIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260929</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .</IndicationAndUsage>
    <Description>Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Capsules:Each capsule, for oral administration, contains 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&amp;C Yellow No. 10, FD&amp;C Red No. 40, gelatin, and titanium dioxide. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>0003-0293-05</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0003-0293-05)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00003-0293-05</NDC11Code>
    <ProductNDC>0003-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kenalog-40</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20090601</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA014901</ApplicationNumber>
    <LabelerName>E.R. Squibb &amp; Sons, L.L.C.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including KENALOG-40 Injection and KENALOG-80 Injection (triamcinolone acetonide injectable suspension, USP) is indicated for intramuscular use as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>KENALOG®-40 Injection and KENALOG®-80 Injection (triamcinolone acetonide injectable suspension, USP) are a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION. KENALOG®-40 Injection: Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. KENALOG®-80 Injection: Each mL of the sterile aqueous suspension provides 80 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is. practically insoluble in water and very soluble in alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0003-0293-20</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0003-0293-20)  / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00003-0293-20</NDC11Code>
    <ProductNDC>0003-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kenalog-40</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20090601</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA014901</ApplicationNumber>
    <LabelerName>E.R. Squibb &amp; Sons, L.L.C.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including KENALOG-40 Injection and KENALOG-80 Injection (triamcinolone acetonide injectable suspension, USP) is indicated for intramuscular use as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>KENALOG®-40 Injection and KENALOG®-80 Injection (triamcinolone acetonide injectable suspension, USP) are a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION. KENALOG®-40 Injection: Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. KENALOG®-80 Injection: Each mL of the sterile aqueous suspension provides 80 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is. practically insoluble in water and very soluble in alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0003-0293-28</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0003-0293-28)  / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00003-0293-28</NDC11Code>
    <ProductNDC>0003-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kenalog-40</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20090601</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA014901</ApplicationNumber>
    <LabelerName>E.R. Squibb &amp; Sons, L.L.C.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including KENALOG-40 Injection and KENALOG-80 Injection (triamcinolone acetonide injectable suspension, USP) is indicated for intramuscular use as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>KENALOG®-40 Injection and KENALOG®-80 Injection (triamcinolone acetonide injectable suspension, USP) are a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION. KENALOG®-40 Injection: Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. KENALOG®-80 Injection: Each mL of the sterile aqueous suspension provides 80 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is. practically insoluble in water and very soluble in alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0293-15</NDCCode>
    <PackageDescription>15 g in 1 TUBE (0168-0293-15) </PackageDescription>
    <NDC11Code>00168-0293-15</NDC11Code>
    <ProductNDC>0168-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20000215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075368</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate gel, cream and ointment are super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol propionate gel, cream and ointment contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate is a white to cream-colored crystalline powder insoluble in water. Chemically, it is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Each gram of the 0.05% gel contains 0.5 mg clobetasol propionate in a base of propylene glycol, carbomer 934P, sodium hydroxide and purified water. Each gram of the 0.05% cream contains clobetasol propionate 0.5 mg in a cream base of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water. Each gram of the 0.05% ointment contains clobetasol propionate 0.5 mg in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0293-30</NDCCode>
    <PackageDescription>30 g in 1 TUBE (0168-0293-30) </PackageDescription>
    <NDC11Code>00168-0293-30</NDC11Code>
    <ProductNDC>0168-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20000215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075368</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate gel, cream and ointment are super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol propionate gel, cream and ointment contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate is a white to cream-colored crystalline powder insoluble in water. Chemically, it is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Each gram of the 0.05% gel contains 0.5 mg clobetasol propionate in a base of propylene glycol, carbomer 934P, sodium hydroxide and purified water. Each gram of the 0.05% cream contains clobetasol propionate 0.5 mg in a cream base of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water. Each gram of the 0.05% ointment contains clobetasol propionate 0.5 mg in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0293-60</NDCCode>
    <PackageDescription>60 g in 1 TUBE (0168-0293-60) </PackageDescription>
    <NDC11Code>00168-0293-60</NDC11Code>
    <ProductNDC>0168-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20000215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075368</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate gel, cream and ointment are super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol propionate gel, cream and ointment contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate is a white to cream-colored crystalline powder insoluble in water. Chemically, it is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Each gram of the 0.05% gel contains 0.5 mg clobetasol propionate in a base of propylene glycol, carbomer 934P, sodium hydroxide and purified water. Each gram of the 0.05% cream contains clobetasol propionate 0.5 mg in a cream base of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water. Each gram of the 0.05% ointment contains clobetasol propionate 0.5 mg in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0462-0293-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0462-0293-60)  &gt; 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>00462-0293-60</NDC11Code>
    <ProductNDC>0462-0293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Temovate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19940429</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020337</ApplicationNumber>
    <LabelerName>PharmaDerm, A division of Fougera Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>TEMOVATE® Gel is a super-high potency cor-ticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended.</IndicationAndUsage>
    <Description>TEMOVATE® (clobetasol propionate gel) Gel, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of pred-nisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16 β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. TEMOVATE® Gel contains clobetasol propi-onate 0.5 mg/g in a base of propylene glycol, carbomer 934P, sodium hydroxide, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-293-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (16590-293-30)</PackageDescription>
    <NDC11Code>16590-0293-30</NDC11Code>
    <ProductNDC>16590-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.</IndicationAndUsage>
    <Description>Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is supplied as 25 mg and 50 mg tablets for oral use. Each tablet contains the following inactive ingredients: FD&amp;C Yellow #6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-293-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (16590-293-60)</PackageDescription>
    <NDC11Code>16590-0293-60</NDC11Code>
    <ProductNDC>16590-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.</IndicationAndUsage>
    <Description>Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is supplied as 25 mg and 50 mg tablets for oral use. Each tablet contains the following inactive ingredients: FD&amp;C Yellow #6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-293-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (16590-293-90)</PackageDescription>
    <NDC11Code>16590-0293-90</NDC11Code>
    <ProductNDC>16590-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.</IndicationAndUsage>
    <Description>Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is supplied as 25 mg and 50 mg tablets for oral use. Each tablet contains the following inactive ingredients: FD&amp;C Yellow #6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>16714-293-01</NDCCode>
    <PackageDescription>50 mL in 1 BOTTLE (16714-293-01) </PackageDescription>
    <NDC11Code>16714-0293-01</NDC11Code>
    <ProductNDC>16714-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111220</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201090</ApplicationNumber>
    <LabelerName>NorthStar Rx LLC</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>400; 57</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111220</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and clavulanate potassium for oral suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below. Limitations of Use. When susceptibility test results show susceptibility to amoxicillin, indicating no beta-lactamase production, amoxicillin and clavulanate potassium for oral suspension should not be used. Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium for oral suspension  and other antibacterial drugs, amoxicillin and clavulanate potassium for oral suspension  should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium for oral suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as: Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Amoxicillin and clavulanate potassium for oral suspension, USP is white to off-white granular powder and becomes white to pale yellow with orange flavored suspension after reconstitution. Inactive Ingredients. Colloidal silicon dioxide, hypromellose, orange flavour, silicon dioxide, succinic acid, xanthan gum and aspartame [see Warnings and Precautions (5.8)].              Each 5 mL of reconstituted 200 mg/28.5 mg oral suspension of amoxicillin and clavulanate potassium contains 0.14 mEq potassium               Each 5 mL of reconstituted 400 mg/57 mg oral suspension of amoxicillin and clavulanate potassium contains 0.29 mEq potassium.</Description>
  </NDC>
  <NDC>
    <NDCCode>16729-293-10</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-293-10) </PackageDescription>
    <NDC11Code>16729-0293-10</NDC11Code>
    <ProductNDC>16729-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eplerenone</ProprietaryName>
    <NonProprietaryName>Eplerenone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181009</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206922</ApplicationNumber>
    <LabelerName>Accord Healthcare, Inc.</LabelerName>
    <SubstanceName>EPLERENONE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.2) .</IndicationAndUsage>
    <Description>Eplerenone tablet contains eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C 24H 30O 6and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below:. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contains 25 mg or 50 mg of eplerenone and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hydroxypropyl methyl cellulose, purified talc, magnesium stearate, titanium dioxide, polyethylene glycol, polysorbate 80, iron oxide yellow and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>16729-293-15</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (16729-293-15) </PackageDescription>
    <NDC11Code>16729-0293-15</NDC11Code>
    <ProductNDC>16729-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eplerenone</ProprietaryName>
    <NonProprietaryName>Eplerenone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181009</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206922</ApplicationNumber>
    <LabelerName>Accord Healthcare, Inc.</LabelerName>
    <SubstanceName>EPLERENONE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.2) .</IndicationAndUsage>
    <Description>Eplerenone tablet contains eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C 24H 30O 6and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below:. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contains 25 mg or 50 mg of eplerenone and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hydroxypropyl methyl cellulose, purified talc, magnesium stearate, titanium dioxide, polyethylene glycol, polysorbate 80, iron oxide yellow and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-293-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (31722-293-01) </PackageDescription>
    <NDC11Code>31722-0293-01</NDC11Code>
    <ProductNDC>31722-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215259</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.175</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-293-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (31722-293-10) </PackageDescription>
    <NDC11Code>31722-0293-10</NDC11Code>
    <ProductNDC>31722-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215259</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.175</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-293-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (31722-293-30) </PackageDescription>
    <NDC11Code>31722-0293-30</NDC11Code>
    <ProductNDC>31722-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215259</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.175</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-293-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (31722-293-90) </PackageDescription>
    <NDC11Code>31722-0293-90</NDC11Code>
    <ProductNDC>31722-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215259</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.175</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
  </NDC>
  <NDC>
    <NDCCode>33992-0293-9</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (33992-0293-9)  &gt; 8 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>33992-0293-09</NDC11Code>
    <ProductNDC>33992-0293</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sleep Aid</ProprietaryName>
    <ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
    <NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040408</StartMarketingDate>
    <EndMarketingDate>20180609</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part338</ApplicationNumber>
    <LabelerName>GREENBRIER INTERNATIONAL, INC.</LabelerName>
    <SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-06-14</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
  </NDC>
  <NDC>
    <NDCCode>42291-293-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (42291-293-01) </PackageDescription>
    <NDC11Code>42291-0293-01</NDC11Code>
    <ProductNDC>42291-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Flecainide Acetate</ProprietaryName>
    <NonProprietaryName>Flecainide Acetate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160622</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075442</ApplicationNumber>
    <LabelerName>AvKARE, Inc.</LabelerName>
    <SubstanceName>FLECAINIDE ACETATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>43598-293-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (43598-293-05) </PackageDescription>
    <NDC11Code>43598-0293-05</NDC11Code>
    <ProductNDC>43598-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190719</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209664</ApplicationNumber>
    <LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190719</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin capsules are indicated for:.  Management of neuropathic pain associated with diabetic peripheral neuropathy.  Management of postherpetic neuralgia.  Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older.  Management of fibromyalgia.  Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-293-66</NDCCode>
    <PackageDescription>5 BLISTER PACK in 1 CARTON (43598-293-66)  / 10 CAPSULE in 1 BLISTER PACK (43598-293-79) </PackageDescription>
    <NDC11Code>43598-0293-66</NDC11Code>
    <ProductNDC>43598-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190719</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209664</ApplicationNumber>
    <LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190719</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin capsules are indicated for:.  Management of neuropathic pain associated with diabetic peripheral neuropathy.  Management of postherpetic neuralgia.  Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older.  Management of fibromyalgia.  Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-293-78</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (43598-293-78)  / 10 CAPSULE in 1 BLISTER PACK (43598-293-79) </PackageDescription>
    <NDC11Code>43598-0293-78</NDC11Code>
    <ProductNDC>43598-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190719</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209664</ApplicationNumber>
    <LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190719</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin capsules are indicated for:.  Management of neuropathic pain associated with diabetic peripheral neuropathy.  Management of postherpetic neuralgia.  Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older.  Management of fibromyalgia.  Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
  </NDC>
</NDCList>