{
"NDC": [
{
"NDCCode": "0268-1416-50",
"PackageDescription": "53 mL in 1 VIAL (0268-1416-50) ",
"NDC11Code": "00268-1416-50",
"ProductNDC": "0268-1416",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Mixed Ragweed",
"NonProprietaryName": "Mixed Ragweed",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AMBROSIA ARTEMISIIFOLIA POLLEN; AMBROSIA TRIFIDA POLLEN",
"StrengthNumber": "10000; 10000",
"StrengthUnit": "[PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "0268-1416-10",
"PackageDescription": "10 mL in 1 VIAL (0268-1416-10) ",
"NDC11Code": "00268-1416-10",
"ProductNDC": "0268-1416",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Mixed Ragweed",
"NonProprietaryName": "Mixed Ragweed",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AMBROSIA ARTEMISIIFOLIA POLLEN; AMBROSIA TRIFIDA POLLEN",
"StrengthNumber": "10000; 10000",
"StrengthUnit": "[PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "22840-1416-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-1416-4) ",
"NDC11Code": "22840-1416-04",
"ProductNDC": "22840-1416",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Arizona Velvet Ash Pollen",
"NonProprietaryName": "Fraxinus Velutina",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "FRAXINUS VELUTINA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-1416-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-1416-4)",
"NDC11Code": "36987-1416-04",
"ProductNDC": "36987-1416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Kiwi",
"NonProprietaryName": "Kiwi",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "KIWI FRUIT",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "51662-1416-1",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (51662-1416-1) ",
"NDC11Code": "51662-1416-01",
"ProductNDC": "51662-1416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci",
"NonProprietaryName": "Lidocaine Hci",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20191018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088325",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191018",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration."
},
{
"NDCCode": "51662-1416-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1416-3) / 1 VIAL, MULTI-DOSE in 1 POUCH (51662-1416-2) / 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "51662-1416-03",
"ProductNDC": "51662-1416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci",
"NonProprietaryName": "Lidocaine Hci",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20191018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088325",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230109",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration."
},
{
"NDCCode": "60219-1416-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60219-1416-3) ",
"NDC11Code": "60219-1416-03",
"ProductNDC": "60219-1416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag Olamine",
"NonProprietaryName": "Eltrombopag",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212884",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag is a thrombopoietin receptor agonist indicated: : 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) , 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) , 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) .",
"Description": "Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is a brown to red color solid, and is slightly soluble in methanol and practically insoluble in cyclohexane. Each eltrombopag tablet contains eltrombopag olamine in the amount of 15.95 mg, 31.90 mg, 63.80 mg or 95.70 mg equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid respectively. The inactive ingredients of eltrombopag tablets are. Tablet Core: magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating: D&C red no. 27 (25 mg tablet), D&C yellow no. 10 (25 mg tablet), FD&C blue no. 1 (25 mg and 50 mg tablet), FD&C blue no. 2 (50 mg tablet), ferrosoferric oxide (75 mg tablet), hypromellose, iron oxide red (75 mg tablet), iron oxide yellow (75 mg tablet), polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "69238-1416-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (69238-1416-3) ",
"NDC11Code": "69238-1416-03",
"ProductNDC": "69238-1416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag Olamine",
"NonProprietaryName": "Eltrombopag",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212884",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag is a thrombopoietin receptor agonist indicated: : 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) , 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2) , 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) , 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) .",
"Description": "Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is a brown to red color solid, and is slightly soluble in methanol and practically insoluble in cyclohexane. Each eltrombopag tablet contains eltrombopag olamine in the amount of 15.95 mg, 31.90 mg, 63.80 mg or 95.70 mg equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid respectively. The inactive ingredients of eltrombopag tablets are. Tablet Core: magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating: D&C red no. 27 (25 mg tablet), D&C yellow no. 10 (25 mg tablet), FD&C blue no. 1 (25 mg and 50 mg tablet), FD&C blue no. 2 (50 mg tablet), ferrosoferric oxide (75 mg tablet), hypromellose, iron oxide red (75 mg tablet), iron oxide yellow (75 mg tablet), polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0168-0268-50",
"PackageDescription": "50 g in 1 TUBE (0168-0268-50) ",
"NDC11Code": "00168-0268-50",
"ProductNDC": "0168-0268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "19990622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075373",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19990622",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone dipropionate ointment (augmented), 0.05% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6 and the following structural formula. Betamethasone dipropionate is a white to creamy-white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white ointment base of propylene glycol, propylene glycol monostearate, beeswax and white petrolatum."
},
{
"NDCCode": "0268-0002-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0002-50)",
"NDC11Code": "00268-0002-50",
"ProductNDC": "0268-0002",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0004-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0004-50)",
"NDC11Code": "00268-0004-50",
"ProductNDC": "0268-0004",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0005-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0005-50)",
"NDC11Code": "00268-0005-50",
"ProductNDC": "0268-0005",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0009-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0009-50)",
"NDC11Code": "00268-0009-50",
"ProductNDC": "0268-0009",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0011-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0011-50)",
"NDC11Code": "00268-0011-50",
"ProductNDC": "0268-0011",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0012-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0012-50)",
"NDC11Code": "00268-0012-50",
"ProductNDC": "0268-0012",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0013-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0013-50)",
"NDC11Code": "00268-0013-50",
"ProductNDC": "0268-0013",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0275-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0275-50) ",
"NDC11Code": "00268-0275-50",
"ProductNDC": "0268-0275",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Farinae",
"NonProprietaryName": "Standardized Mite D. Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910708",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103060",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19910708",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.",
"Description": "Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy."
},
{
"NDCCode": "0268-0276-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0276-50) ",
"NDC11Code": "00268-0276-50",
"ProductNDC": "0268-0276",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Farinae",
"NonProprietaryName": "Standardized Mite D. Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910708",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103060",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19910708",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0277-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0277-50) ",
"NDC11Code": "00268-0277-50",
"ProductNDC": "0268-0277",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Pteronyssinus",
"NonProprietaryName": "Standardized Mite D. Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19900814",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103752",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900814",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.",
"Description": "Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy."
},
{
"NDCCode": "0268-0278-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0278-50) ",
"NDC11Code": "00268-0278-50",
"ProductNDC": "0268-0278",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Pteronyssinus",
"NonProprietaryName": "Standardized Mite D. Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19900814",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103752",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19900814",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0279-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0279-50) ",
"NDC11Code": "00268-0279-50",
"ProductNDC": "0268-0279",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Timothy, Standardized",
"NonProprietaryName": "Timothy, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103058",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "PHLEUM PRATENSE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0280-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0280-50) ",
"NDC11Code": "00268-0280-50",
"ProductNDC": "0268-0280",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Timothy, Standardized",
"NonProprietaryName": "Timothy, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103058",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "PHLEUM PRATENSE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0281-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0281-50) ",
"NDC11Code": "00268-0281-50",
"ProductNDC": "0268-0281",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Orchard Grass, Standardized",
"NonProprietaryName": "Orchard Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103054",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0282-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0282-50) ",
"NDC11Code": "00268-0282-50",
"ProductNDC": "0268-0282",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Orchard Grass, Standardized",
"NonProprietaryName": "Orchard Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103054",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0283-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0283-50) ",
"NDC11Code": "00268-0283-50",
"ProductNDC": "0268-0283",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Kentucky Bluegrass (june) Standardized",
"NonProprietaryName": "Kentucky Bluegrass June, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103052",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0284-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0284-50) ",
"NDC11Code": "00268-0284-50",
"ProductNDC": "0268-0284",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Kentucky Bluegrass (june) Standardized",
"NonProprietaryName": "Kentucky Bluegrass June, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103052",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0285-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0285-50) ",
"NDC11Code": "00268-0285-50",
"ProductNDC": "0268-0285",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Redtop Grass, Standardized",
"NonProprietaryName": "Redtop Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103055",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0286-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0286-50) ",
"NDC11Code": "00268-0286-50",
"ProductNDC": "0268-0286",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Redtop Grass, Standardized",
"NonProprietaryName": "Redtop Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103055",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0287-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0287-50) ",
"NDC11Code": "00268-0287-50",
"ProductNDC": "0268-0287",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Sweet Vernal Grass, Standardized",
"NonProprietaryName": "Sweet Vernal Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103057",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0289-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0289-50) ",
"NDC11Code": "00268-0289-50",
"ProductNDC": "0268-0289",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Rye Grass, Perennial Standardized",
"NonProprietaryName": "Rye Grass, Perennial Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103056",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "LOLIUM PERENNE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0268-1416-50</NDCCode>
<PackageDescription>53 mL in 1 VIAL (0268-1416-50) </PackageDescription>
<NDC11Code>00268-1416-50</NDC11Code>
<ProductNDC>0268-1416</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Mixed Ragweed</ProprietaryName>
<NonProprietaryName>Mixed Ragweed</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AMBROSIA ARTEMISIIFOLIA POLLEN; AMBROSIA TRIFIDA POLLEN</SubstanceName>
<StrengthNumber>10000; 10000</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-1416-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL (0268-1416-10) </PackageDescription>
<NDC11Code>00268-1416-10</NDC11Code>
<ProductNDC>0268-1416</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Mixed Ragweed</ProprietaryName>
<NonProprietaryName>Mixed Ragweed</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AMBROSIA ARTEMISIIFOLIA POLLEN; AMBROSIA TRIFIDA POLLEN</SubstanceName>
<StrengthNumber>10000; 10000</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>22840-1416-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1416-4) </PackageDescription>
<NDC11Code>22840-1416-04</NDC11Code>
<ProductNDC>22840-1416</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Arizona Velvet Ash Pollen</ProprietaryName>
<NonProprietaryName>Fraxinus Velutina</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>FRAXINUS VELUTINA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-1416-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1416-4)</PackageDescription>
<NDC11Code>36987-1416-04</NDC11Code>
<ProductNDC>36987-1416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Kiwi</ProprietaryName>
<NonProprietaryName>Kiwi</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>KIWI FRUIT</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>51662-1416-1</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (51662-1416-1) </PackageDescription>
<NDC11Code>51662-1416-01</NDC11Code>
<ProductNDC>51662-1416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci</ProprietaryName>
<NonProprietaryName>Lidocaine Hci</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20191018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088325</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>51662-1416-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1416-3) / 1 VIAL, MULTI-DOSE in 1 POUCH (51662-1416-2) / 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>51662-1416-03</NDC11Code>
<ProductNDC>51662-1416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci</ProprietaryName>
<NonProprietaryName>Lidocaine Hci</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20191018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088325</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>60219-1416-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60219-1416-3) </PackageDescription>
<NDC11Code>60219-1416-03</NDC11Code>
<ProductNDC>60219-1416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag Olamine</ProprietaryName>
<NonProprietaryName>Eltrombopag</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212884</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag is a thrombopoietin receptor agonist indicated: : 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) , 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) , 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) .</IndicationAndUsage>
<Description>Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is a brown to red color solid, and is slightly soluble in methanol and practically insoluble in cyclohexane. Each eltrombopag tablet contains eltrombopag olamine in the amount of 15.95 mg, 31.90 mg, 63.80 mg or 95.70 mg equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid respectively. The inactive ingredients of eltrombopag tablets are. Tablet Core: magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating: D&C red no. 27 (25 mg tablet), D&C yellow no. 10 (25 mg tablet), FD&C blue no. 1 (25 mg and 50 mg tablet), FD&C blue no. 2 (50 mg tablet), ferrosoferric oxide (75 mg tablet), hypromellose, iron oxide red (75 mg tablet), iron oxide yellow (75 mg tablet), polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69238-1416-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69238-1416-3) </PackageDescription>
<NDC11Code>69238-1416-03</NDC11Code>
<ProductNDC>69238-1416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag Olamine</ProprietaryName>
<NonProprietaryName>Eltrombopag</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212884</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag is a thrombopoietin receptor agonist indicated: : 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) , 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2) , 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) , 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) .</IndicationAndUsage>
<Description>Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is a brown to red color solid, and is slightly soluble in methanol and practically insoluble in cyclohexane. Each eltrombopag tablet contains eltrombopag olamine in the amount of 15.95 mg, 31.90 mg, 63.80 mg or 95.70 mg equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid respectively. The inactive ingredients of eltrombopag tablets are. Tablet Core: magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating: D&C red no. 27 (25 mg tablet), D&C yellow no. 10 (25 mg tablet), FD&C blue no. 1 (25 mg and 50 mg tablet), FD&C blue no. 2 (50 mg tablet), ferrosoferric oxide (75 mg tablet), hypromellose, iron oxide red (75 mg tablet), iron oxide yellow (75 mg tablet), polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0168-0268-50</NDCCode>
<PackageDescription>50 g in 1 TUBE (0168-0268-50) </PackageDescription>
<NDC11Code>00168-0268-50</NDC11Code>
<ProductNDC>0168-0268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19990622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075373</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone dipropionate ointment (augmented), 0.05% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6 and the following structural formula. Betamethasone dipropionate is a white to creamy-white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white ointment base of propylene glycol, propylene glycol monostearate, beeswax and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>0268-0002-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0002-50)</PackageDescription>
<NDC11Code>00268-0002-50</NDC11Code>
<ProductNDC>0268-0002</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0004-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0004-50)</PackageDescription>
<NDC11Code>00268-0004-50</NDC11Code>
<ProductNDC>0268-0004</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0005-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0005-50)</PackageDescription>
<NDC11Code>00268-0005-50</NDC11Code>
<ProductNDC>0268-0005</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0009-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0009-50)</PackageDescription>
<NDC11Code>00268-0009-50</NDC11Code>
<ProductNDC>0268-0009</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0011-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0011-50)</PackageDescription>
<NDC11Code>00268-0011-50</NDC11Code>
<ProductNDC>0268-0011</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0012-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0012-50)</PackageDescription>
<NDC11Code>00268-0012-50</NDC11Code>
<ProductNDC>0268-0012</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0013-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0013-50)</PackageDescription>
<NDC11Code>00268-0013-50</NDC11Code>
<ProductNDC>0268-0013</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0275-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0275-50) </PackageDescription>
<NDC11Code>00268-0275-50</NDC11Code>
<ProductNDC>0268-0275</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910708</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103060</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.</IndicationAndUsage>
<Description>Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy.</Description>
</NDC>
<NDC>
<NDCCode>0268-0276-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0276-50) </PackageDescription>
<NDC11Code>00268-0276-50</NDC11Code>
<ProductNDC>0268-0276</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910708</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103060</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0277-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0277-50) </PackageDescription>
<NDC11Code>00268-0277-50</NDC11Code>
<ProductNDC>0268-0277</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19900814</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103752</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.</IndicationAndUsage>
<Description>Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy.</Description>
</NDC>
<NDC>
<NDCCode>0268-0278-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0278-50) </PackageDescription>
<NDC11Code>00268-0278-50</NDC11Code>
<ProductNDC>0268-0278</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19900814</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103752</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0279-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0279-50) </PackageDescription>
<NDC11Code>00268-0279-50</NDC11Code>
<ProductNDC>0268-0279</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Timothy, Standardized</ProprietaryName>
<NonProprietaryName>Timothy, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103058</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>PHLEUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0280-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0280-50) </PackageDescription>
<NDC11Code>00268-0280-50</NDC11Code>
<ProductNDC>0268-0280</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Timothy, Standardized</ProprietaryName>
<NonProprietaryName>Timothy, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103058</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>PHLEUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0281-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0281-50) </PackageDescription>
<NDC11Code>00268-0281-50</NDC11Code>
<ProductNDC>0268-0281</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Orchard Grass, Standardized</ProprietaryName>
<NonProprietaryName>Orchard Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103054</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0282-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0282-50) </PackageDescription>
<NDC11Code>00268-0282-50</NDC11Code>
<ProductNDC>0268-0282</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Orchard Grass, Standardized</ProprietaryName>
<NonProprietaryName>Orchard Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103054</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0283-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0283-50) </PackageDescription>
<NDC11Code>00268-0283-50</NDC11Code>
<ProductNDC>0268-0283</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Kentucky Bluegrass (june) Standardized</ProprietaryName>
<NonProprietaryName>Kentucky Bluegrass June, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103052</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0284-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0284-50) </PackageDescription>
<NDC11Code>00268-0284-50</NDC11Code>
<ProductNDC>0268-0284</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Kentucky Bluegrass (june) Standardized</ProprietaryName>
<NonProprietaryName>Kentucky Bluegrass June, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103052</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0285-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0285-50) </PackageDescription>
<NDC11Code>00268-0285-50</NDC11Code>
<ProductNDC>0268-0285</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Redtop Grass, Standardized</ProprietaryName>
<NonProprietaryName>Redtop Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103055</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0286-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0286-50) </PackageDescription>
<NDC11Code>00268-0286-50</NDC11Code>
<ProductNDC>0268-0286</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Redtop Grass, Standardized</ProprietaryName>
<NonProprietaryName>Redtop Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103055</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0287-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0287-50) </PackageDescription>
<NDC11Code>00268-0287-50</NDC11Code>
<ProductNDC>0268-0287</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Sweet Vernal Grass, Standardized</ProprietaryName>
<NonProprietaryName>Sweet Vernal Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103057</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0289-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0289-50) </PackageDescription>
<NDC11Code>00268-0289-50</NDC11Code>
<ProductNDC>0268-0289</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Rye Grass, Perennial Standardized</ProprietaryName>
<NonProprietaryName>Rye Grass, Perennial Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103056</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>LOLIUM PERENNE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
</NDCList>