{
"NDC": [
{
"NDCCode": "0268-1518-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-1518-50) ",
"NDC11Code": "00268-1518-50",
"ProductNDC": "0268-1518",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Amaranthus Tuberculatus Pollen",
"NonProprietaryName": "Water Hemp",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AMARANTHUS TUBERCULATUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "0268-1518-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (0268-1518-10) ",
"NDC11Code": "00268-1518-10",
"ProductNDC": "0268-1518",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Amaranthus Tuberculatus Pollen",
"NonProprietaryName": "Water Hemp",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AMARANTHUS TUBERCULATUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N"
},
{
"NDCCode": "36987-1518-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-1518-4)",
"NDC11Code": "36987-1518-04",
"ProductNDC": "36987-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tomato",
"NonProprietaryName": "Tomato",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "TOMATO",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "59762-1518-2",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (59762-1518-2) ",
"NDC11Code": "59762-1518-02",
"ProductNDC": "59762-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20141210",
"EndMarketingDate": "20240831",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020998",
"LabelerName": "Greenstone LLC",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141210",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib include: croscarmellose sodium, edible inks, gelatin, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate."
},
{
"NDCCode": "65044-1518-5",
"PackageDescription": "5 mL in 1 VIAL (65044-1518-5) ",
"NDC11Code": "65044-1518-05",
"ProductNDC": "65044-1518",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Weeds, Dock/sorrel Mix",
"NonProprietaryName": "Pollens - Weeds, Dock/sorrel Mix",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "RUMEX CRISPUS POLLEN; RUMEX ACETOSELLA POLLEN",
"StrengthNumber": "500; 500",
"StrengthUnit": "[PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.",
"Description": "Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength."
},
{
"NDCCode": "68071-1518-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (68071-1518-3) ",
"NDC11Code": "68071-1518-03",
"ProductNDC": "68071-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090467",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170725",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan potassium 25 mg, 50 mg and 100 mg tablets contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively."
},
{
"NDCCode": "71335-1518-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-1518-1) ",
"NDC11Code": "71335-1518-01",
"ProductNDC": "71335-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203512",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170602",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1518-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (71335-1518-2) ",
"NDC11Code": "71335-1518-02",
"ProductNDC": "71335-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203512",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170602",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1518-3",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-1518-3) ",
"NDC11Code": "71335-1518-03",
"ProductNDC": "71335-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203512",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170602",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1518-4",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (71335-1518-4) ",
"NDC11Code": "71335-1518-04",
"ProductNDC": "71335-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203512",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170602",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1518-5",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (71335-1518-5) ",
"NDC11Code": "71335-1518-05",
"ProductNDC": "71335-1518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203512",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170602",
"SamplePackage": "N"
},
{
"NDCCode": "0168-0268-50",
"PackageDescription": "50 g in 1 TUBE (0168-0268-50) ",
"NDC11Code": "00168-0268-50",
"ProductNDC": "0168-0268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "19990622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075373",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19990622",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone dipropionate ointment (augmented), 0.05% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6 and the following structural formula. Betamethasone dipropionate is a white to creamy-white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white ointment base of propylene glycol, propylene glycol monostearate, beeswax and white petrolatum."
},
{
"NDCCode": "0268-0002-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0002-50)",
"NDC11Code": "00268-0002-50",
"ProductNDC": "0268-0002",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0004-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0004-50)",
"NDC11Code": "00268-0004-50",
"ProductNDC": "0268-0004",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0005-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0005-50)",
"NDC11Code": "00268-0005-50",
"ProductNDC": "0268-0005",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0009-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0009-50)",
"NDC11Code": "00268-0009-50",
"ProductNDC": "0268-0009",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0011-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0011-50)",
"NDC11Code": "00268-0011-50",
"ProductNDC": "0268-0011",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0012-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0012-50)",
"NDC11Code": "00268-0012-50",
"ProductNDC": "0268-0012",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0013-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0013-50)",
"NDC11Code": "00268-0013-50",
"ProductNDC": "0268-0013",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0268-0275-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0275-50) ",
"NDC11Code": "00268-0275-50",
"ProductNDC": "0268-0275",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Farinae",
"NonProprietaryName": "Standardized Mite D. Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910708",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103060",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19910708",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.",
"Description": "Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy."
},
{
"NDCCode": "0268-0276-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0276-50) ",
"NDC11Code": "00268-0276-50",
"ProductNDC": "0268-0276",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Farinae",
"NonProprietaryName": "Standardized Mite D. Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910708",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103060",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19910708",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0277-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0277-50) ",
"NDC11Code": "00268-0277-50",
"ProductNDC": "0268-0277",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Pteronyssinus",
"NonProprietaryName": "Standardized Mite D. Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19900814",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103752",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900814",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.",
"Description": "Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy."
},
{
"NDCCode": "0268-0278-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0278-50) ",
"NDC11Code": "00268-0278-50",
"ProductNDC": "0268-0278",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Mite D. Pteronyssinus",
"NonProprietaryName": "Standardized Mite D. Pteronyssinus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19900814",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103752",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19900814",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0279-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0279-50) ",
"NDC11Code": "00268-0279-50",
"ProductNDC": "0268-0279",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Timothy, Standardized",
"NonProprietaryName": "Timothy, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103058",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "PHLEUM PRATENSE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0280-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0280-50) ",
"NDC11Code": "00268-0280-50",
"ProductNDC": "0268-0280",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Timothy, Standardized",
"NonProprietaryName": "Timothy, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103058",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "PHLEUM PRATENSE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0281-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0281-50) ",
"NDC11Code": "00268-0281-50",
"ProductNDC": "0268-0281",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Orchard Grass, Standardized",
"NonProprietaryName": "Orchard Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103054",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0282-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0282-50) ",
"NDC11Code": "00268-0282-50",
"ProductNDC": "0268-0282",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Orchard Grass, Standardized",
"NonProprietaryName": "Orchard Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103054",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0283-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0283-50) ",
"NDC11Code": "00268-0283-50",
"ProductNDC": "0268-0283",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Kentucky Bluegrass (june) Standardized",
"NonProprietaryName": "Kentucky Bluegrass June, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103052",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
},
{
"NDCCode": "0268-0284-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0284-50) ",
"NDC11Code": "00268-0284-50",
"ProductNDC": "0268-0284",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Kentucky Bluegrass (june) Standardized",
"NonProprietaryName": "Kentucky Bluegrass June, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103052",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N"
},
{
"NDCCode": "0268-0285-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (0268-0285-50) ",
"NDC11Code": "00268-0285-50",
"ProductNDC": "0268-0285",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Redtop Grass, Standardized",
"NonProprietaryName": "Redtop Grass, Standardized",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19971218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103055",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971218",
"SamplePackage": "N",
"IndicationAndUsage": "Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.",
"Description": "Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0268-1518-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-1518-50) </PackageDescription>
<NDC11Code>00268-1518-50</NDC11Code>
<ProductNDC>0268-1518</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Amaranthus Tuberculatus Pollen</ProprietaryName>
<NonProprietaryName>Water Hemp</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AMARANTHUS TUBERCULATUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-1518-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (0268-1518-10) </PackageDescription>
<NDC11Code>00268-1518-10</NDC11Code>
<ProductNDC>0268-1518</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Amaranthus Tuberculatus Pollen</ProprietaryName>
<NonProprietaryName>Water Hemp</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AMARANTHUS TUBERCULATUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>36987-1518-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1518-4)</PackageDescription>
<NDC11Code>36987-1518-04</NDC11Code>
<ProductNDC>36987-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tomato</ProprietaryName>
<NonProprietaryName>Tomato</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>TOMATO</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>59762-1518-2</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (59762-1518-2) </PackageDescription>
<NDC11Code>59762-1518-02</NDC11Code>
<ProductNDC>59762-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141210</StartMarketingDate>
<EndMarketingDate>20240831</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020998</ApplicationNumber>
<LabelerName>Greenstone LLC</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141210</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib include: croscarmellose sodium, edible inks, gelatin, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>65044-1518-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-1518-5) </PackageDescription>
<NDC11Code>65044-1518-05</NDC11Code>
<ProductNDC>65044-1518</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Weeds, Dock/sorrel Mix</ProprietaryName>
<NonProprietaryName>Pollens - Weeds, Dock/sorrel Mix</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>RUMEX CRISPUS POLLEN; RUMEX ACETOSELLA POLLEN</SubstanceName>
<StrengthNumber>500; 500</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.</IndicationAndUsage>
<Description>Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength.</Description>
</NDC>
<NDC>
<NDCCode>68071-1518-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68071-1518-3) </PackageDescription>
<NDC11Code>68071-1518-03</NDC11Code>
<ProductNDC>68071-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090467</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan potassium 25 mg, 50 mg and 100 mg tablets contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
</NDC>
<NDC>
<NDCCode>71335-1518-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-1518-1) </PackageDescription>
<NDC11Code>71335-1518-01</NDC11Code>
<ProductNDC>71335-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203512</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1518-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (71335-1518-2) </PackageDescription>
<NDC11Code>71335-1518-02</NDC11Code>
<ProductNDC>71335-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203512</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1518-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-1518-3) </PackageDescription>
<NDC11Code>71335-1518-03</NDC11Code>
<ProductNDC>71335-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203512</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1518-4</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (71335-1518-4) </PackageDescription>
<NDC11Code>71335-1518-04</NDC11Code>
<ProductNDC>71335-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203512</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1518-5</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (71335-1518-5) </PackageDescription>
<NDC11Code>71335-1518-05</NDC11Code>
<ProductNDC>71335-1518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203512</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0168-0268-50</NDCCode>
<PackageDescription>50 g in 1 TUBE (0168-0268-50) </PackageDescription>
<NDC11Code>00168-0268-50</NDC11Code>
<ProductNDC>0168-0268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19990622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075373</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone dipropionate ointment (augmented), 0.05% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6 and the following structural formula. Betamethasone dipropionate is a white to creamy-white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white ointment base of propylene glycol, propylene glycol monostearate, beeswax and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>0268-0002-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0002-50)</PackageDescription>
<NDC11Code>00268-0002-50</NDC11Code>
<ProductNDC>0268-0002</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0004-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0004-50)</PackageDescription>
<NDC11Code>00268-0004-50</NDC11Code>
<ProductNDC>0268-0004</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0005-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0005-50)</PackageDescription>
<NDC11Code>00268-0005-50</NDC11Code>
<ProductNDC>0268-0005</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0009-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0009-50)</PackageDescription>
<NDC11Code>00268-0009-50</NDC11Code>
<ProductNDC>0268-0009</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0011-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0011-50)</PackageDescription>
<NDC11Code>00268-0011-50</NDC11Code>
<ProductNDC>0268-0011</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0012-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0012-50)</PackageDescription>
<NDC11Code>00268-0012-50</NDC11Code>
<ProductNDC>0268-0012</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0013-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0013-50)</PackageDescription>
<NDC11Code>00268-0013-50</NDC11Code>
<ProductNDC>0268-0013</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized House Dust Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [Chemical/Ingredient],House Dust [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0268-0275-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0275-50) </PackageDescription>
<NDC11Code>00268-0275-50</NDC11Code>
<ProductNDC>0268-0275</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910708</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103060</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.</IndicationAndUsage>
<Description>Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy.</Description>
</NDC>
<NDC>
<NDCCode>0268-0276-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0276-50) </PackageDescription>
<NDC11Code>00268-0276-50</NDC11Code>
<ProductNDC>0268-0276</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910708</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103060</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0277-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0277-50) </PackageDescription>
<NDC11Code>00268-0277-50</NDC11Code>
<ProductNDC>0268-0277</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19900814</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103752</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for the diagnosis and treatment of hypersensitivity in patients with symptoms compatible with dust mite allergy. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants, in situations where the offending allergen cannot be avoided. Mixtures of standardized mite (D. farinae and D. pteronyssinus) should be considered for treatment of patients who are sensitive to both species. Prior to the initiation of therapy, clinical sensitivity should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can be easily avoided.</IndicationAndUsage>
<Description>Allergenic Extract Standardized Mite in the accompanying vial is a sterile solution and contains glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients include sodium chloride for isotonicity and sodium bicarbonates, as a buffer. The mites (D. farinae and/or D. pteronyssinus). used as source material for this extract, were cultured by Biopol Laboratories on a medium consisting of yeast and pork. The whole-body mites were separated from the culture medium and the harvested mites contained less than 1% culture medium material. Several manufacturers submitted to FDA, intradermal skin test data on Biopol Laboratory’s mite medium extract using patients who were puncture test positive (sum of erythema equal to or greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (sum of erythema equal to or greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive also skin tested by the puncture method with an extract of yeast (Saccharomyces sp) and were positive. In ten mite sensitive patients, ALK-Abelló, Inc. observed no puncture or intradermal reactions to media from the same source at a carryover concentration equivalent to 1% of the mite extract. For ease in use, and for lot to lot consistency, potency value is expressed in allergy units per milliliter. This ELISA standardized mite extract was compared to a mite reference preparation supplied by FDA which was labeled 10,000 AU/mL based on skin testing.1 The relative potency of this mite extract was determined by ELISA inhibition in comparison to the FDA Mite reference and is labeled in AU's (Allergy Units/mL).2 Dilutions made from this product can be administered intradermally for testing, or subcutaneously for immunotherapy.</Description>
</NDC>
<NDC>
<NDCCode>0268-0278-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0278-50) </PackageDescription>
<NDC11Code>00268-0278-50</NDC11Code>
<ProductNDC>0268-0278</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Mite D. Pteronyssinus</ProprietaryName>
<NonProprietaryName>Standardized Mite D. Pteronyssinus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19900814</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103752</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0279-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0279-50) </PackageDescription>
<NDC11Code>00268-0279-50</NDC11Code>
<ProductNDC>0268-0279</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Timothy, Standardized</ProprietaryName>
<NonProprietaryName>Timothy, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103058</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>PHLEUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0280-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0280-50) </PackageDescription>
<NDC11Code>00268-0280-50</NDC11Code>
<ProductNDC>0268-0280</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Timothy, Standardized</ProprietaryName>
<NonProprietaryName>Timothy, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103058</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>PHLEUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0281-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0281-50) </PackageDescription>
<NDC11Code>00268-0281-50</NDC11Code>
<ProductNDC>0268-0281</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Orchard Grass, Standardized</ProprietaryName>
<NonProprietaryName>Orchard Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103054</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0282-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0282-50) </PackageDescription>
<NDC11Code>00268-0282-50</NDC11Code>
<ProductNDC>0268-0282</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Orchard Grass, Standardized</ProprietaryName>
<NonProprietaryName>Orchard Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103054</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0283-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0283-50) </PackageDescription>
<NDC11Code>00268-0283-50</NDC11Code>
<ProductNDC>0268-0283</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Kentucky Bluegrass (june) Standardized</ProprietaryName>
<NonProprietaryName>Kentucky Bluegrass June, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103052</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
<NDC>
<NDCCode>0268-0284-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0284-50) </PackageDescription>
<NDC11Code>00268-0284-50</NDC11Code>
<ProductNDC>0268-0284</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Kentucky Bluegrass (june) Standardized</ProprietaryName>
<NonProprietaryName>Kentucky Bluegrass June, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103052</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0268-0285-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (0268-0285-50) </PackageDescription>
<NDC11Code>00268-0285-50</NDC11Code>
<ProductNDC>0268-0285</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Redtop Grass, Standardized</ProprietaryName>
<NonProprietaryName>Redtop Grass, Standardized</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19971218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103055</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indicated use of allergenic extracts is for the diagnosis and treatment (hyposensitization therapy) of patients who experience allergic symptoms due to exposure to grass pollen and who exhibit type I skin sensitivity when tested to those specific allergens. Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust mites, molds, animal danders, and various other inhalants in situations where the offending allergen cannot be avoided. For previously untreated patients, prior to the initiation of therapy, clinical sensitivity to the standardized grass pollen extract should be established by careful evaluation of the patient's history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided. 10,000 BAU/mL extracts are indicated for percutaneous testing. If negative, the 100,000 BAU/mL dose may be used. Availability of 10,000 and 100,000 BAU/mL dosages facilitate safe switching. Patients who tolerate dilutions prepared from the 10,000 BAU/mL dosage and require a higher dose may be treated with dilutions prepared from the 100,000 BAU/mL dosage. 100,000 BAU/mL concentrations may be especially useful when patients are hyposensitized to numerous allergens. Mixing of allergenic extracts dilutes the potency of each constituent. Using higher concentrations such as 100,000 BAU/mL allows for dilution with other extracts without sacrificing immunizing properties. CAUTION: The final potency of each individual component in a patient mixture should never exceed 10,000 BAU/mL. See also, DOSAGE AND ADMINISTRATION section for discussion of mixture labeling.</IndicationAndUsage>
<Description>Standardized allergenic extract of grass pollens from Timothy (Phleum pratense), Orchard (Dactylis glomerata), June (Poa pratensis), Red Top (Agrostis alba), Sweet Vernal (Anthoxanthum odoratum), Meadow Fescue (Festuca elatior), Perennial Rye (Lolium perenne), Bermuda Grass (Cynodon dactylon), in the accompanying vial are sterile, and contain glycerin 50% v/v and phenol 0.4% (preservative). Inert ingredients may include sodium chloride for isotonicity and sodium bicarbonate buffer. Glycerinated pollen extracts, for subcutaneous injection for immunotherapy and/or percutaneous or intracutaneous testing (see Dosage and Administration section), are prepared from defatted dried pollen extracted in glycerinated Coca’s Fluid, filtered aseptically, and dispensed into multiple dose vials. These are subsequently tested for sterility, safety, and potency. For ease in use and for lot-to-lot consistency, the potency is expressed in Bioequivalent Allergy Units (BAUs) per milliliter. A value of 10,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:0.5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects1. A value of 100,000 BAU/mL is assigned to the CBER reference standard that can be diluted 1:5 million to produce intradermal ƩE (sum of Erythema) of 50 mm in highly puncture reactive subjects. The relative potency of each lot of standardized extract has been compared to the official CBER reference standard by an acceptable assay such as ELISA Inhibition.2 When the potency is equivalent by ELISA Inhibition to the reference, the product is assigned 10,000 BAU/mL or 100,000 BAU/mL. Standardized grass pollen extracts, except for Bermuda, have potency designations of either 10,000 BAU/mL or 100,000 BAU/mL. Bermuda grass pollen extract is only available with a 10,000 BAU/mL potency designation. In the ELISA Inhibition assay, a competitive binding assay, the wells of microtiter plates are coated using a characterized allergenic extract. Allergic sera is added to each well. The binding of IgE specific for the coating allergen is inhibited by concentrations of a test sample of an extract of the same allergen. The amount of IgE bound to the solid phase allergen (and subsequently the degree of inhibition) is determined using enzyme-labeled anti-human IgE antibodies and the appropriate substrate. The potency relative to a reference is determined using a parallel line bioassay method.</Description>
</NDC>
</NDCList>