{
"NDC": [
{
"NDCCode": "0338-0017-38",
"PackageDescription": "16 BAG in 1 POUCH (0338-0017-38) / 100 mL in 1 BAG",
"NDC11Code": "00338-0017-38",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "51339-017-38",
"PackageDescription": "1 BOTTLE in 1 CARTON (51339-017-38) > 38 mL in 1 BOTTLE",
"NDC11Code": "51339-0017-38",
"ProductNDC": "51339-017",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Delilah Time Frame Future Resist Foundation Broad Spectrum Spf 20 Sunscreen Foundation Truffle",
"NonProprietaryName": "Avobenzone, Octinoxate, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141017",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Gotha Cometics SRL",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTOCRYLENE",
"StrengthNumber": "6; 30; 30",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-10-31"
},
{
"NDCCode": "75749-017-38",
"PackageDescription": "60 mL in 1 TUBE (75749-017-38) ",
"NDC11Code": "75749-0017-38",
"ProductNDC": "75749-017",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Ethanol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200628",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "NINGBO PRETTY TOURISM MANUFACTURE CO.,LTD.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200628",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "0338-0049-38",
"PackageDescription": "16 BAG in 1 PACKAGE (0338-0049-38) / 100 mL in 1 BAG",
"NDC11Code": "00338-0049-38",
"ProductNDC": "0338-0049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19701209",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016677",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19701209",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.",
"Description": "Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "42571-338-38",
"PackageDescription": "50 kg in 1 DRUM (42571-338-38)",
"NDC11Code": "42571-0338-38",
"ProductNDC": "42571-338",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dalfampridine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190702",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "DALFAMPRIDINE",
"StrengthNumber": "50",
"StrengthUnit": "kg/50kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "74052-338-38",
"PackageDescription": "18927.1 mL in 1 BOTTLE (74052-338-38) ",
"NDC11Code": "74052-0338-38",
"ProductNDC": "74052-338",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Iris Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Iris LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "80",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "0338-0017-01",
"PackageDescription": "150 mL in 1 BAG (0338-0017-01) ",
"NDC11Code": "00338-0017-01",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Deprecated",
"LastUpdate": "2023-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N"
},
{
"NDCCode": "0338-0017-02",
"PackageDescription": "250 mL in 1 BAG (0338-0017-02) ",
"NDC11Code": "00338-0017-02",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-03",
"PackageDescription": "500 mL in 1 BAG (0338-0017-03) ",
"NDC11Code": "00338-0017-03",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0017-04) ",
"NDC11Code": "00338-0017-04",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-10",
"PackageDescription": "4 BAG in 1 POUCH (0338-0017-10) / 25 mL in 1 BAG",
"NDC11Code": "00338-0017-10",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-11",
"PackageDescription": "4 BAG in 1 POUCH (0338-0017-11) / 50 mL in 1 BAG",
"NDC11Code": "00338-0017-11",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-18",
"PackageDescription": "4 BAG in 1 POUCH (0338-0017-18) / 100 mL in 1 BAG",
"NDC11Code": "00338-0017-18",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-31",
"PackageDescription": "16 BAG in 1 POUCH (0338-0017-31) / 50 mL in 1 BAG",
"NDC11Code": "00338-0017-31",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-41",
"PackageDescription": "1 BAG in 1 PACKAGE (0338-0017-41) / 50 mL in 1 BAG",
"NDC11Code": "00338-0017-41",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0017-48",
"PackageDescription": "1 BAG in 1 PACKAGE (0338-0017-48) / 100 mL in 1 BAG",
"NDC11Code": "00338-0017-48",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0122-04",
"PackageDescription": "250 mL in 1 BAG (0338-0122-04) ",
"NDC11Code": "00338-0122-04",
"ProductNDC": "0338-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/250mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-0124-04",
"PackageDescription": "300 mL in 1 BAG (0338-0124-04) ",
"NDC11Code": "00338-0124-04",
"ProductNDC": "0338-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/300mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-1130-03",
"PackageDescription": "500 mL in 1 BAG (0338-1130-03) ",
"NDC11Code": "00338-1130-03",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "0338-1130-04",
"PackageDescription": "1000 mL in 1 BAG (0338-1130-04) ",
"NDC11Code": "00338-1130-04",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "0338-1130-06",
"PackageDescription": "2000 mL in 1 BAG (0338-1130-06) ",
"NDC11Code": "00338-1130-06",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "0338-3551-48",
"PackageDescription": "100 mL in 1 BAG (0338-3551-48) ",
"NDC11Code": "00338-3551-48",
"ProductNDC": "0338-3551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3552-48",
"PackageDescription": "200 mL in 1 BAG (0338-3552-48) ",
"NDC11Code": "00338-3552-48",
"ProductNDC": "0338-3552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3580-48",
"PackageDescription": "200 mL in 1 BAG (0338-3580-48) ",
"NDC11Code": "00338-3580-48",
"ProductNDC": "0338-3580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3581-01",
"PackageDescription": "100 mL in 1 BAG (0338-3581-01) ",
"NDC11Code": "00338-3581-01",
"ProductNDC": "0338-3581",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3582-01",
"PackageDescription": "150 mL in 1 BAG (0338-3582-01) ",
"NDC11Code": "00338-3582-01",
"ProductNDC": "0338-3582",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3583-01",
"PackageDescription": "200 mL in 1 BAG (0338-3583-01) ",
"NDC11Code": "00338-3583-01",
"ProductNDC": "0338-3583",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-9566-08",
"PackageDescription": "8 BAG in 1 CARTON (0338-9566-08) > 1 L in 1 BAG",
"NDC11Code": "00338-9566-08",
"ProductNDC": "0338-9566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Isoleucine, Leucine, Valine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Arginine, Histidine, Alanine, Glycine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Sodium Chloride, Magnesium Chloride, Dextrose Monohydrate, Calcium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171025",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "ISOLEUCINE; LEUCINE; VALINE; LYSINE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; ARGININE; HISTIDINE; ALANINE; GLYCINE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM CHLORIDE; MAGNESIUM CHLORIDE; DEXTROSE MONOHYDRATE; CALCIUM CHLORIDE",
"StrengthNumber": "1.65; 2.01; 1.6; 2; 1.1; 1.54; 1.16; .5; 3.17; 1.32; 5.7; 2.84; 1.87; 1.38; .11; 2.16; 2.61; 1.12; .51; 100; .33",
"StrengthUnit": "g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20171025",
"SamplePackage": "N"
},
{
"NDCCode": "0338-9570-08",
"PackageDescription": "8 BAG in 1 CARTON (0338-9570-08) > 1 L in 1 BAG",
"NDC11Code": "00338-9570-08",
"ProductNDC": "0338-9570",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Isoleucine, Leucine, Valine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Arginine, Histidine, Alanine, Glycine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Sodium Chloride, Magnesium Chloride, Dextrose Monohydrate, Calcium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171025",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "ISOLEUCINE; LEUCINE; VALINE; LYSINE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; ARGININE; HISTIDINE; ALANINE; GLYCINE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM CHLORIDE; MAGNESIUM CHLORIDE; DEXTROSE MONOHYDRATE; CALCIUM CHLORIDE",
"StrengthNumber": "1.65; 2.01; 1.6; 2; 1.1; 1.54; 1.16; .5; 3.17; 1.32; 5.7; 2.84; 1.87; 1.38; .11; 2.16; 2.61; 1.12; .51; 75; .33",
"StrengthUnit": "g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20171025",
"SamplePackage": "N"
},
{
"NDCCode": "69452-338-13",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE, PLASTIC (69452-338-13) ",
"NDC11Code": "69452-0338-13",
"ProductNDC": "69452-338",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202547",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole orally disintegrating tablets are indicated for the treatment of: 1 Schizophrenia, 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder, 3 Adjunctive Treatment of Major Depressive Disorder, 4 Irritability Associated with Autistic Disorder, 5 Treatment of Tourette’s Disorder.",
"Description": "Aripiprazole, USP is an atypical antipsychotic drug that is available as orally disintegrating tablets. Aripiprazole, USP is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4- dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole orally disintegrating tablets, USP are available in 10 mg and 15 mg strengths. Inactive ingredients include acesulfame potassium, aspartame, cream vanilla, crospovidone, croscarmellose sodium, mannitol, magnesium stearate, microcrystalline cellulose, silicon dioxide, tartaric acid, and ferric oxide red."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0338-0017-38</NDCCode>
<PackageDescription>16 BAG in 1 POUCH (0338-0017-38) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-38</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>51339-017-38</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (51339-017-38) > 38 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>51339-0017-38</NDC11Code>
<ProductNDC>51339-017</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Delilah Time Frame Future Resist Foundation Broad Spectrum Spf 20 Sunscreen Foundation Truffle</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141017</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Gotha Cometics SRL</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>6; 30; 30</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-10-31</LastUpdate>
</NDC>
<NDC>
<NDCCode>75749-017-38</NDCCode>
<PackageDescription>60 mL in 1 TUBE (75749-017-38) </PackageDescription>
<NDC11Code>75749-0017-38</NDC11Code>
<ProductNDC>75749-017</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethanol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200628</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>NINGBO PRETTY TOURISM MANUFACTURE CO.,LTD.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0338-0049-38</NDCCode>
<PackageDescription>16 BAG in 1 PACKAGE (0338-0049-38) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0049-38</NDC11Code>
<ProductNDC>0338-0049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19701209</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016677</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19701209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>42571-338-38</NDCCode>
<PackageDescription>50 kg in 1 DRUM (42571-338-38)</PackageDescription>
<NDC11Code>42571-0338-38</NDC11Code>
<ProductNDC>42571-338</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dalfampridine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190702</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>DALFAMPRIDINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>kg/50kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>74052-338-38</NDCCode>
<PackageDescription>18927.1 mL in 1 BOTTLE (74052-338-38) </PackageDescription>
<NDC11Code>74052-0338-38</NDC11Code>
<ProductNDC>74052-338</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Iris Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Iris LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0338-0017-01</NDCCode>
<PackageDescription>150 mL in 1 BAG (0338-0017-01) </PackageDescription>
<NDC11Code>00338-0017-01</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-0017-02</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0017-02) </PackageDescription>
<NDC11Code>00338-0017-02</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0017-03) </PackageDescription>
<NDC11Code>00338-0017-03</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0017-04) </PackageDescription>
<NDC11Code>00338-0017-04</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-10</NDCCode>
<PackageDescription>4 BAG in 1 POUCH (0338-0017-10) / 25 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-10</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-11</NDCCode>
<PackageDescription>4 BAG in 1 POUCH (0338-0017-11) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-11</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-18</NDCCode>
<PackageDescription>4 BAG in 1 POUCH (0338-0017-18) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-18</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-31</NDCCode>
<PackageDescription>16 BAG in 1 POUCH (0338-0017-31) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-31</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-41</NDCCode>
<PackageDescription>1 BAG in 1 PACKAGE (0338-0017-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-41</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-48</NDCCode>
<PackageDescription>1 BAG in 1 PACKAGE (0338-0017-48) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0017-48</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0122-04</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0122-04) </PackageDescription>
<NDC11Code>00338-0122-04</NDC11Code>
<ProductNDC>0338-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/250mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-0124-04</NDCCode>
<PackageDescription>300 mL in 1 BAG (0338-0124-04) </PackageDescription>
<NDC11Code>00338-0124-04</NDC11Code>
<ProductNDC>0338-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/300mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-1130-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-1130-03) </PackageDescription>
<NDC11Code>00338-1130-03</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0338-1130-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-1130-04) </PackageDescription>
<NDC11Code>00338-1130-04</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0338-1130-06</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1130-06) </PackageDescription>
<NDC11Code>00338-1130-06</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0338-3551-48</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3551-48) </PackageDescription>
<NDC11Code>00338-3551-48</NDC11Code>
<ProductNDC>0338-3551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3552-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3552-48) </PackageDescription>
<NDC11Code>00338-3552-48</NDC11Code>
<ProductNDC>0338-3552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3580-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3580-48) </PackageDescription>
<NDC11Code>00338-3580-48</NDC11Code>
<ProductNDC>0338-3580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3581-01</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3581-01) </PackageDescription>
<NDC11Code>00338-3581-01</NDC11Code>
<ProductNDC>0338-3581</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3582-01</NDCCode>
<PackageDescription>150 mL in 1 BAG (0338-3582-01) </PackageDescription>
<NDC11Code>00338-3582-01</NDC11Code>
<ProductNDC>0338-3582</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3583-01</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3583-01) </PackageDescription>
<NDC11Code>00338-3583-01</NDC11Code>
<ProductNDC>0338-3583</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-9566-08</NDCCode>
<PackageDescription>8 BAG in 1 CARTON (0338-9566-08) > 1 L in 1 BAG</PackageDescription>
<NDC11Code>00338-9566-08</NDC11Code>
<ProductNDC>0338-9566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Valine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Arginine, Histidine, Alanine, Glycine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Sodium Chloride, Magnesium Chloride, Dextrose Monohydrate, Calcium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171025</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; VALINE; LYSINE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; ARGININE; HISTIDINE; ALANINE; GLYCINE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM CHLORIDE; MAGNESIUM CHLORIDE; DEXTROSE MONOHYDRATE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.65; 2.01; 1.6; 2; 1.1; 1.54; 1.16; .5; 3.17; 1.32; 5.7; 2.84; 1.87; 1.38; .11; 2.16; 2.61; 1.12; .51; 100; .33</StrengthNumber>
<StrengthUnit>g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-9570-08</NDCCode>
<PackageDescription>8 BAG in 1 CARTON (0338-9570-08) > 1 L in 1 BAG</PackageDescription>
<NDC11Code>00338-9570-08</NDC11Code>
<ProductNDC>0338-9570</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Valine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Arginine, Histidine, Alanine, Glycine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Sodium Chloride, Magnesium Chloride, Dextrose Monohydrate, Calcium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171025</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; VALINE; LYSINE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; ARGININE; HISTIDINE; ALANINE; GLYCINE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM CHLORIDE; MAGNESIUM CHLORIDE; DEXTROSE MONOHYDRATE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.65; 2.01; 1.6; 2; 1.1; 1.54; 1.16; .5; 3.17; 1.32; 5.7; 2.84; 1.87; 1.38; .11; 2.16; 2.61; 1.12; .51; 75; .33</StrengthNumber>
<StrengthUnit>g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L; g/L</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69452-338-13</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE, PLASTIC (69452-338-13) </PackageDescription>
<NDC11Code>69452-0338-13</NDC11Code>
<ProductNDC>69452-338</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202547</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole orally disintegrating tablets are indicated for the treatment of: 1 Schizophrenia, 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder, 3 Adjunctive Treatment of Major Depressive Disorder, 4 Irritability Associated with Autistic Disorder, 5 Treatment of Tourette’s Disorder.</IndicationAndUsage>
<Description>Aripiprazole, USP is an atypical antipsychotic drug that is available as orally disintegrating tablets. Aripiprazole, USP is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4- dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole orally disintegrating tablets, USP are available in 10 mg and 15 mg strengths. Inactive ingredients include acesulfame potassium, aspartame, cream vanilla, crospovidone, croscarmellose sodium, mannitol, magnesium stearate, microcrystalline cellulose, silicon dioxide, tartaric acid, and ferric oxide red.</Description>
</NDC>
</NDCList>