{
"NDC": [
{
"NDCCode": "0338-0118-44",
"PackageDescription": "1000 mL in 1 BAG (0338-0118-44)",
"NDC11Code": "00338-0118-44",
"ProductNDC": "0338-0118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride And Calcium Chloride",
"DosageFormName": "SOLUTION, FOR SLUSH",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19890829",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019933",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "CALCIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE",
"StrengthNumber": ".2; .3; 6; 3.1",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [Chemical/Ingredient],Cations, Divalent [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2015-09-04"
},
{
"NDCCode": "0338-0003-44",
"PackageDescription": "14 BAG in 1 CARTON (0338-0003-44) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0003-44",
"ProductNDC": "0338-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19800530",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017866",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "WATER",
"StrengthNumber": "100",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800530",
"SamplePackage": "N",
"IndicationAndUsage": "Sterile Water for Irrigation is indicated for use as an irrigant.",
"Description": "Sterile Water for Irrigation contains water that is sterilized and packaged for use as an irrigant. No antimicrobial agent or other substance has been added. The pH is 5.5 (5.0 to 7.0). Sterile Water for Irrigation is hypotonic with an osmolarity of zero mOsmol/L. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the fluid significantly. Water in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The plastic pour bottle is fabricated from specially formulated polyolefin. The polyolefin is a copolymer of ethylene and propylene. The container requires no vapor barrier."
},
{
"NDCCode": "0338-0047-44",
"PackageDescription": "14 BAG in 1 CARTON (0338-0047-44) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0047-44",
"ProductNDC": "0338-0047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19800530",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017867",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "900",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800530",
"SamplePackage": "N"
},
{
"NDCCode": "0338-0051-44",
"PackageDescription": "1000 mL in 1 BAG (0338-0051-44) ",
"NDC11Code": "00338-0051-44",
"ProductNDC": "0338-0051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19850517",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019319",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19850517",
"SamplePackage": "N",
"IndicationAndUsage": "Slushed solution is used to create regional hypothermia in order to reduce and minimize manifestations of warm-temperature ischemia. Temperature probes may be used to determine requirements for replacement or addition of slushed solution.",
"Description": "0.9% Sodium Chloride Irrigation, USP in the Baxter Sterile Container System is a sterile, nonpyrogenic, isotonic solution for the preparation of slushed solution. It contains no antimicrobial agents. Composition, osmolarity, pH and ionic concentration are shown in Table 1. The Baxter Sterile Container System is designed to provide a slush container with a sterile exterior surface for use within the surgical field. Within the overwrap, the unit is packaged in a dispensing bag which maintains the sterility of this surface. The flexible plastic slush container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by culture toxicity studies."
},
{
"NDCCode": "12634-118-44",
"PackageDescription": "84 TABLET in 1 BOTTLE, PLASTIC (12634-118-44)",
"NDC11Code": "12634-0118-44",
"ProductNDC": "12634-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzphetamine Hydrochloride",
"NonProprietaryName": "Benaphetamine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040747",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "BENZPHETAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2017-01-30"
},
{
"NDCCode": "24909-118-44",
"PackageDescription": "44 g in 1 JAR (24909-118-44)",
"NDC11Code": "24909-0118-44",
"ProductNDC": "24909-118",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Terrasil Fissures Formula",
"NonProprietaryName": "Cocoa Butter",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part346",
"LabelerName": "Aidance Skincare & Topical Solutions, LLC",
"SubstanceName": "COCOA BUTTER",
"StrengthNumber": "50",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "For the temporary relief of local itching and discomfort in the perianal area, associated with anorectal disorders. Temporarily forms a protective coating over inflamed tissues to help prevent drying of tissues. Temporarily protects irritated areas. Temporarily relieves burning."
},
{
"NDCCode": "76177-118-44",
"PackageDescription": ".2 kg in 1 BAG (76177-118-44) ",
"NDC11Code": "76177-0118-44",
"ProductNDC": "76177-118",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Sinopep-Allsino Biopharmaceutical Co., Ltd.",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-06-05",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "01-MAR-19"
},
{
"NDCCode": "83986-118-44",
"PackageDescription": "532 mL in 1 BOTTLE, PLASTIC (83986-118-44) ",
"NDC11Code": "83986-0118-44",
"ProductNDC": "83986-118",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Foaming Hand Sanitizer",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240229",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "UpLift Brands LLC",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240229",
"SamplePackage": "N",
"IndicationAndUsage": "to decrease bacteria on the skin."
},
{
"NDCCode": "10631-118-31",
"PackageDescription": "3 BLISTER PACK in 1 BOX (10631-118-31) / 10 CAPSULE in 1 BLISTER PACK (10631-118-69) ",
"NDC11Code": "10631-0118-31",
"ProductNDC": "10631-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Absorica",
"NonProprietaryName": "Isotretinoin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021951",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ISOTRETINOIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120608",
"SamplePackage": "N",
"IndicationAndUsage": "ABSORICA and ABSORICA LD are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, ABSORICA and ABSORICA LD are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of ABSORICA/ABSORICA LD treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment[see Dosage and Administration (2.2)].",
"Description": "ABSORICA. ABSORICA (isotretinoin) Capsules contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems. 10 mg – iron oxide (yellow) and titanium dioxide;. 20 mg – iron oxide (red), and titanium dioxide;. 25 mg – FD&C Blue #1, FD&C Yellow #5 [see Warnings and Precautions (5.14)], FD&C Yellow #6 and titanium dioxide;. 30 mg – iron oxide (black, red and yellow) and titanium dioxide;. 35 mg – FD&C Blue #2, iron oxide (black, red and yellow) and titanium dioxide;. 40 mg – iron oxide (black, red and yellow) and titanium dioxide. ABSORICA LD. ABSORICA LD (isotretinoin) Capsules contain 8 mg, 16 mg, 20 mg, 24 mg, 28 mg and 32 mg of micronized isotretinoin (a retinoid) in suspension filled in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, USP each capsule contains the following inactive ingredients: butylated hydroxy anisole, gelatin, hard gelatin capsule shell, polysorbate 80 and soybean oil. The gelatin capsules contain the following dye systems. 8 mg – D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and titanium dioxide. 16 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 20 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 24 mg – D&C Yellow #10, FD&C Yellow #6 and titanium dioxide. 28 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 32 mg – ferrosoferric oxide, ferric oxide (red and yellow) and titanium dioxide. The imprinting ink of 8 mg, 16 mg, 24 mg and 32 mg capsules contain the following ingredients: potassium hydroxide, propylene glycol, shellac and titanium dioxide. The imprinting ink of 20 mg and 28 mg capsules contain the following ingredients: ferrosoferric oxide, propylene glycol and shellac glaze. Isotretinoin. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to orange crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in chloroform and sparingly soluble in alcohol and in isopropyl alcohol. The structural formula is. ABSORICA meets USP Dissolution Test 3. For ABSORICA LD, FDA approved dissolution test differs from the USP."
},
{
"NDCCode": "70594-118-01",
"PackageDescription": "30 mL in 1 VIAL, SINGLE-DOSE (70594-118-01) ",
"NDC11Code": "70594-0118-01",
"ProductNDC": "70594-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hcl",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091487",
"LabelerName": "Xellia Pharmaceuticals USA LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Bupivacaine hydrochloride injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "75936-118-01",
"PackageDescription": "15 mL in 1 TUBE (75936-118-01)",
"NDC11Code": "75936-0118-01",
"ProductNDC": "75936-118",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acaifusion Lip Balm Broad Spectrum Spf 30",
"ProprietaryNameSuffix": "Supergoop",
"NonProprietaryName": "Avobenzone, Octinoxate, Octisalate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120628",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "TAYLOR JAMES, LTD.",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": ".44; 1.11; .74",
"StrengthUnit": "g/15mL; g/15mL; g/15mL",
"Status": "Deprecated",
"LastUpdate": "2016-02-05"
},
{
"NDCCode": "75936-118-02",
"PackageDescription": "1 TUBE in 1 BOX (75936-118-02) > 15 mL in 1 TUBE (75936-118-01) ",
"NDC11Code": "75936-0118-02",
"ProductNDC": "75936-118",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acaifusion Lip Balm Broad Spectrum Spf 30",
"ProprietaryNameSuffix": "Supergoop",
"NonProprietaryName": "Avobenzone, Octinoxate, Octisalate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120628",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SUPERGOOP LLC",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": ".44; 1.11; .74",
"StrengthUnit": "g/15mL; g/15mL; g/15mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20120628",
"SamplePackage": "N",
"IndicationAndUsage": "· Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "80425-0118-1",
"PackageDescription": "28 TABLET in 1 BOTTLE (80425-0118-1) ",
"NDC11Code": "80425-0118-01",
"ProductNDC": "80425-0118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hcl",
"NonProprietaryName": "Phentermine Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040555",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20050415",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS AND USAGE. Phentermine hydrochloride tablets are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2. Height (feet, inches). Weight (pounds) 5'0\" 5'3\" 5'6\" 5'9\" 6'0\" 6'3\" 140 27 25 23 21 19 18 150 29 27 24 22 20 19 160 31 28 26 24 22 20 170 33 30 28 25 23 21 180 35 32 29 27 25 23 190 37 34 31 28 26 24 200 39 36 32 30 27 25 210 41 37 34 31 29 26 220 43 39 36 33 30 28 230 45 41 37 34 31 29 240 47 43 39 36 33 30 250 49 44 40 37 34 31. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine Hydrochloride Tablet, USP is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. C10H15N HCl M.W. 185.7. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine Hydrochloride Tablets, USP are available as oral tablets containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Each phentermine hydrochloride tablet also contains the following inactive ingredients: corn starch, lactose (anhydrous), magnesium stearate, microcrystalline, cellulose, pregelatinized starch, compressible sugar, and FD&C Blue # 1 aluminum lake."
},
{
"NDCCode": "0338-0122-04",
"PackageDescription": "250 mL in 1 BAG (0338-0122-04) ",
"NDC11Code": "00338-0122-04",
"ProductNDC": "0338-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/250mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-0124-04",
"PackageDescription": "300 mL in 1 BAG (0338-0124-04) ",
"NDC11Code": "00338-0124-04",
"ProductNDC": "0338-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/300mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-0499-03",
"PackageDescription": "500 mL in 1 BAG (0338-0499-03)",
"NDC11Code": "00338-0499-03",
"ProductNDC": "0338-0499",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prosol",
"NonProprietaryName": "Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19980826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020849",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE",
"StrengthNumber": "1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-11-15",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0338-0499-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0499-04)",
"NDC11Code": "00338-0499-04",
"ProductNDC": "0338-0499",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prosol",
"NonProprietaryName": "Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19980826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020849",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE",
"StrengthNumber": "1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-11-15",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0338-0499-06",
"PackageDescription": "2000 mL in 1 BAG (0338-0499-06) ",
"NDC11Code": "00338-0499-06",
"ProductNDC": "0338-0499",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prosol",
"NonProprietaryName": "Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19980826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020849",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE",
"StrengthNumber": "1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980826",
"SamplePackage": "N",
"IndicationAndUsage": "PROSOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. PROSOL may be used to treat negative nitrogen balance in patients.",
"Description": "PROSOL 20% (amino acids) injection is a sterile, nonpyrogenic, hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. PROSOL is not for direct intravenous infusion. The formulas for the individual amino acids found in PROSOL are provided in Table 4. PROSOL contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0518-12",
"PackageDescription": "250 mL in 1 BAG (0338-0518-12) ",
"NDC11Code": "00338-0518-12",
"ProductNDC": "0338-0518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017643",
"LabelerName": "Baxter Healthcare CORP",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141212",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0518-13",
"PackageDescription": "500 mL in 1 BAG (0338-0518-13) ",
"NDC11Code": "00338-0518-13",
"ProductNDC": "0338-0518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017643",
"LabelerName": "Baxter Healthcare CORP",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141212",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0518-58",
"PackageDescription": "100 mL in 1 BAG (0338-0518-58) ",
"NDC11Code": "00338-0518-58",
"ProductNDC": "0338-0518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017643",
"LabelerName": "Baxter Healthcare CORP",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141212",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0519-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0519-04) ",
"NDC11Code": "00338-0519-04",
"ProductNDC": "0338-0519",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020248",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2019-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid ® 20% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-inone or total nutrition admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid ® 20% (A 20% I.V. Fat Emulsion) Pharmacy Bulk Package is a sterile, non-pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid ® 20% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in the preparation of three-in-one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (44-62%), oleic (19-30%), palmitic (7-14%), linolenic (4-11%) and stearic (1.4-5.5%) 1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure. contain saturated and unsaturated fatty acids that abound in neutral fats. R 3 is primarily either the choline or ethanolamine ester of phosphoric acid. Phosphatidylcholine Phosphatidylethanolamine. Glycerin is chemically designated C 3H 8O 3and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid ® 20% (A 20% I.V. Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmol/liter of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid ® 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary container is manufactured from Excel ® film, a polypropylene based material comprised of three co-extruded layers. The plastic container is made from multilayered film specifically designed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0519-09",
"PackageDescription": "250 mL in 1 BAG (0338-0519-09) ",
"NDC11Code": "00338-0519-09",
"ProductNDC": "0338-0519",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018449",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0519-13",
"PackageDescription": "500 mL in 1 BAG (0338-0519-13) ",
"NDC11Code": "00338-0519-13",
"ProductNDC": "0338-0519",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018449",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0519-14",
"PackageDescription": "1000 mL in 1 BAG (0338-0519-14) ",
"NDC11Code": "00338-0519-14",
"ProductNDC": "0338-0519",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020248",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 20% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-in-one or total nutrition admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 20% (A 20% I.V. Fat Emulsion) is a sterile, non-pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid 20% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in preparation of three-in-one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or the ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% I.V. Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. This product is not made with natural rubber latex. The container is nontoxic and biologically inert. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0519-58",
"PackageDescription": "100 mL in 1 BAG (0338-0519-58) ",
"NDC11Code": "00338-0519-58",
"ProductNDC": "0338-0519",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I.v. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018449",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-0520-13",
"PackageDescription": "500 mL in 1 BAG (0338-0520-13) ",
"NDC11Code": "00338-0520-13",
"ProductNDC": "0338-0520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Intralipid",
"NonProprietaryName": "I. V. Fat Emulsion",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019942",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SOYBEAN OIL",
"StrengthNumber": "30",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040401",
"SamplePackage": "N",
"IndicationAndUsage": "Intralipid® 30% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-in-one or total nutrient admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.",
"Description": "Intralipid® 30% (A 30% I.V. Fat Emulsion) Pharmacy Bulk Package is a sterile, non- pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 30% Soybean Oil, 1.2% Egg Yolk Phospholipids, 1.7% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid 30% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in the preparation of three-in- one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 30% (A 30% I.V. Fat Emulsion) has an osmolality of approximately 310 mOsmoL/kg water (which represents 200 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 3.0 kcal per mL of Intralipid 30%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. This product is not made with natural rubber latex. The container is nontoxic and biologically inert. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "0338-1013-41",
"PackageDescription": "50 mL in 1 BAG (0338-1013-41) ",
"NDC11Code": "00338-1013-41",
"ProductNDC": "0338-1013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxacillin",
"NonProprietaryName": "Oxacillin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19891026",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050640",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OXACILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19891026",
"SamplePackage": "N",
"IndicationAndUsage": "Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug. (See CLINICAL PHARMACOLOGY - Susceptibility Test Methods.). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin Injection, USP and other antibacterial drugs, Oxacillin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Oxacillin Injection, USP is a sterile injectable product containing oxacillin which is added as oxacillin sodium, a semisynthetic penicillin derived from the penicillin nucleus, 6-aminopenicillanic acid. The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4- isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C19H18N3NaO5SH2O. The molecular weight is 441.44. The structural formula of oxacillin sodium is as follows. Oxacillin Injection, USP is a frozen, iso-osmotic, sterile, nonpyrogenic premixed 50 mL solution containing 1 g or 2 g of oxacillin added as oxacillin sodium. Dextrose, USP has been added to the above dosages to adjust osmolality (approximately 1.5 g and 300 mg as dextrose hydrous to the 1 g and 2 g dosages respectively). Sodium Citrate Hydrous, USP has been added as a buffer (approximately 150 mg and 300 mg to the 1 g and 2 g dosages, respectively). The pH has been adjusted with hydrochloric acid and may have been adjusted with sodium hydroxide. The pH is 6.5 (6.0 to 8.5). The solution is intended for intravenous use after thawing to room temperature. This GALAXY container (PL 2040) is fabricated from a specially designed multilayer plastic (PL 2040). Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-1015-41",
"PackageDescription": "50 mL in 1 BAG (0338-1015-41) ",
"NDC11Code": "00338-1015-41",
"ProductNDC": "0338-1015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxacillin",
"NonProprietaryName": "Oxacillin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19891026",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050640",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OXACILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19891026",
"SamplePackage": "N",
"IndicationAndUsage": "Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug. (See CLINICAL PHARMACOLOGY - Susceptibility Test Methods.). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin Injection, USP and other antibacterial drugs, Oxacillin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Oxacillin Injection, USP is a sterile injectable product containing oxacillin which is added as oxacillin sodium, a semisynthetic penicillin derived from the penicillin nucleus, 6-aminopenicillanic acid. The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4- isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C19H18N3NaO5SH2O. The molecular weight is 441.44. The structural formula of oxacillin sodium is as follows. Oxacillin Injection, USP is a frozen, iso-osmotic, sterile, nonpyrogenic premixed 50 mL solution containing 2 g of oxacillin added as oxacillin sodium. Dextrose, USP has been added to the above dosages to adjust osmolality (approximately 300 mg as dextrose hydrous to the 2 g dosages). Sodium Citrate Hydrous, USP has been added as a buffer (approximately 300 mg to the 2 g dosage). The pH has been adjusted with hydrochloric acid and may have been adjusted with sodium hydroxide. The pH is 6.5 (6.0 to 8.5). The solution is intended for intravenous use after thawing to room temperature. This Galaxy container is fabricated from a specially designed multilayer plastic. Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-3551-48",
"PackageDescription": "100 mL in 1 BAG (0338-3551-48) ",
"NDC11Code": "00338-3551-48",
"ProductNDC": "0338-3551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0338-0118-44</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0118-44)</PackageDescription>
<NDC11Code>00338-0118-44</NDC11Code>
<ProductNDC>0338-0118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride And Calcium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION, FOR SLUSH</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19890829</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019933</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>CALCIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE</SubstanceName>
<StrengthNumber>.2; .3; 6; 3.1</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [Chemical/Ingredient],Cations, Divalent [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-09-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0003-44</NDCCode>
<PackageDescription>14 BAG in 1 CARTON (0338-0003-44) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0003-44</NDC11Code>
<ProductNDC>0338-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19800530</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017866</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800530</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sterile Water for Irrigation is indicated for use as an irrigant.</IndicationAndUsage>
<Description>Sterile Water for Irrigation contains water that is sterilized and packaged for use as an irrigant. No antimicrobial agent or other substance has been added. The pH is 5.5 (5.0 to 7.0). Sterile Water for Irrigation is hypotonic with an osmolarity of zero mOsmol/L. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the fluid significantly. Water in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The plastic pour bottle is fabricated from specially formulated polyolefin. The polyolefin is a copolymer of ethylene and propylene. The container requires no vapor barrier.</Description>
</NDC>
<NDC>
<NDCCode>0338-0047-44</NDCCode>
<PackageDescription>14 BAG in 1 CARTON (0338-0047-44) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0047-44</NDC11Code>
<ProductNDC>0338-0047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19800530</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017867</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>900</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800530</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-0051-44</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0051-44) </PackageDescription>
<NDC11Code>00338-0051-44</NDC11Code>
<ProductNDC>0338-0051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19850517</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019319</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19850517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Slushed solution is used to create regional hypothermia in order to reduce and minimize manifestations of warm-temperature ischemia. Temperature probes may be used to determine requirements for replacement or addition of slushed solution.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Irrigation, USP in the Baxter Sterile Container System is a sterile, nonpyrogenic, isotonic solution for the preparation of slushed solution. It contains no antimicrobial agents. Composition, osmolarity, pH and ionic concentration are shown in Table 1. The Baxter Sterile Container System is designed to provide a slush container with a sterile exterior surface for use within the surgical field. Within the overwrap, the unit is packaged in a dispensing bag which maintains the sterility of this surface. The flexible plastic slush container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>12634-118-44</NDCCode>
<PackageDescription>84 TABLET in 1 BOTTLE, PLASTIC (12634-118-44)</PackageDescription>
<NDC11Code>12634-0118-44</NDC11Code>
<ProductNDC>12634-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzphetamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Benaphetamine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040747</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>BENZPHETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-01-30</LastUpdate>
</NDC>
<NDC>
<NDCCode>24909-118-44</NDCCode>
<PackageDescription>44 g in 1 JAR (24909-118-44)</PackageDescription>
<NDC11Code>24909-0118-44</NDC11Code>
<ProductNDC>24909-118</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Terrasil Fissures Formula</ProprietaryName>
<NonProprietaryName>Cocoa Butter</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part346</ApplicationNumber>
<LabelerName>Aidance Skincare & Topical Solutions, LLC</LabelerName>
<SubstanceName>COCOA BUTTER</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the temporary relief of local itching and discomfort in the perianal area, associated with anorectal disorders. Temporarily forms a protective coating over inflamed tissues to help prevent drying of tissues. Temporarily protects irritated areas. Temporarily relieves burning.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>76177-118-44</NDCCode>
<PackageDescription>.2 kg in 1 BAG (76177-118-44) </PackageDescription>
<NDC11Code>76177-0118-44</NDC11Code>
<ProductNDC>76177-118</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Sinopep-Allsino Biopharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-06-05</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-MAR-19</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>83986-118-44</NDCCode>
<PackageDescription>532 mL in 1 BOTTLE, PLASTIC (83986-118-44) </PackageDescription>
<NDC11Code>83986-0118-44</NDC11Code>
<ProductNDC>83986-118</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Foaming Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240229</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>UpLift Brands LLC</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10631-118-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 BOX (10631-118-31) / 10 CAPSULE in 1 BLISTER PACK (10631-118-69) </PackageDescription>
<NDC11Code>10631-0118-31</NDC11Code>
<ProductNDC>10631-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Absorica</ProprietaryName>
<NonProprietaryName>Isotretinoin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021951</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ISOTRETINOIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABSORICA and ABSORICA LD are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, ABSORICA and ABSORICA LD are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of ABSORICA/ABSORICA LD treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment[see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>ABSORICA. ABSORICA (isotretinoin) Capsules contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems. 10 mg – iron oxide (yellow) and titanium dioxide;. 20 mg – iron oxide (red), and titanium dioxide;. 25 mg – FD&C Blue #1, FD&C Yellow #5 [see Warnings and Precautions (5.14)], FD&C Yellow #6 and titanium dioxide;. 30 mg – iron oxide (black, red and yellow) and titanium dioxide;. 35 mg – FD&C Blue #2, iron oxide (black, red and yellow) and titanium dioxide;. 40 mg – iron oxide (black, red and yellow) and titanium dioxide. ABSORICA LD. ABSORICA LD (isotretinoin) Capsules contain 8 mg, 16 mg, 20 mg, 24 mg, 28 mg and 32 mg of micronized isotretinoin (a retinoid) in suspension filled in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, USP each capsule contains the following inactive ingredients: butylated hydroxy anisole, gelatin, hard gelatin capsule shell, polysorbate 80 and soybean oil. The gelatin capsules contain the following dye systems. 8 mg – D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and titanium dioxide. 16 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 20 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 24 mg – D&C Yellow #10, FD&C Yellow #6 and titanium dioxide. 28 mg – FD&C Blue #1, FD&C Red #40, and titanium dioxide. 32 mg – ferrosoferric oxide, ferric oxide (red and yellow) and titanium dioxide. The imprinting ink of 8 mg, 16 mg, 24 mg and 32 mg capsules contain the following ingredients: potassium hydroxide, propylene glycol, shellac and titanium dioxide. The imprinting ink of 20 mg and 28 mg capsules contain the following ingredients: ferrosoferric oxide, propylene glycol and shellac glaze. Isotretinoin. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to orange crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in chloroform and sparingly soluble in alcohol and in isopropyl alcohol. The structural formula is. ABSORICA meets USP Dissolution Test 3. For ABSORICA LD, FDA approved dissolution test differs from the USP.</Description>
</NDC>
<NDC>
<NDCCode>70594-118-01</NDCCode>
<PackageDescription>30 mL in 1 VIAL, SINGLE-DOSE (70594-118-01) </PackageDescription>
<NDC11Code>70594-0118-01</NDC11Code>
<ProductNDC>70594-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hcl</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091487</ApplicationNumber>
<LabelerName>Xellia Pharmaceuticals USA LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>75936-118-01</NDCCode>
<PackageDescription>15 mL in 1 TUBE (75936-118-01)</PackageDescription>
<NDC11Code>75936-0118-01</NDC11Code>
<ProductNDC>75936-118</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acaifusion Lip Balm Broad Spectrum Spf 30</ProprietaryName>
<ProprietaryNameSuffix>Supergoop</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120628</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>TAYLOR JAMES, LTD.</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>.44; 1.11; .74</StrengthNumber>
<StrengthUnit>g/15mL; g/15mL; g/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-02-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>75936-118-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (75936-118-02) > 15 mL in 1 TUBE (75936-118-01) </PackageDescription>
<NDC11Code>75936-0118-02</NDC11Code>
<ProductNDC>75936-118</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acaifusion Lip Balm Broad Spectrum Spf 30</ProprietaryName>
<ProprietaryNameSuffix>Supergoop</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120628</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SUPERGOOP LLC</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>.44; 1.11; .74</StrengthNumber>
<StrengthUnit>g/15mL; g/15mL; g/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>· Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>80425-0118-1</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (80425-0118-1) </PackageDescription>
<NDC11Code>80425-0118-01</NDC11Code>
<ProductNDC>80425-0118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hcl</ProprietaryName>
<NonProprietaryName>Phentermine Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040555</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS AND USAGE. Phentermine hydrochloride tablets are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2. Height (feet, inches). Weight (pounds) 5'0" 5'3" 5'6" 5'9" 6'0" 6'3" 140 27 25 23 21 19 18 150 29 27 24 22 20 19 160 31 28 26 24 22 20 170 33 30 28 25 23 21 180 35 32 29 27 25 23 190 37 34 31 28 26 24 200 39 36 32 30 27 25 210 41 37 34 31 29 26 220 43 39 36 33 30 28 230 45 41 37 34 31 29 240 47 43 39 36 33 30 250 49 44 40 37 34 31. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine Hydrochloride Tablet, USP is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. C10H15N HCl M.W. 185.7. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine Hydrochloride Tablets, USP are available as oral tablets containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Each phentermine hydrochloride tablet also contains the following inactive ingredients: corn starch, lactose (anhydrous), magnesium stearate, microcrystalline, cellulose, pregelatinized starch, compressible sugar, and FD&C Blue # 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>0338-0122-04</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0122-04) </PackageDescription>
<NDC11Code>00338-0122-04</NDC11Code>
<ProductNDC>0338-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/250mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-0124-04</NDCCode>
<PackageDescription>300 mL in 1 BAG (0338-0124-04) </PackageDescription>
<NDC11Code>00338-0124-04</NDC11Code>
<ProductNDC>0338-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/300mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-0499-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0499-03)</PackageDescription>
<NDC11Code>00338-0499-03</NDC11Code>
<ProductNDC>0338-0499</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prosol</ProprietaryName>
<NonProprietaryName>Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19980826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020849</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE</SubstanceName>
<StrengthNumber>1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-15</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0338-0499-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0499-04)</PackageDescription>
<NDC11Code>00338-0499-04</NDC11Code>
<ProductNDC>0338-0499</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prosol</ProprietaryName>
<NonProprietaryName>Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19980826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020849</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE</SubstanceName>
<StrengthNumber>1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-15</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0338-0499-06</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-0499-06) </PackageDescription>
<NDC11Code>00338-0499-06</NDC11Code>
<ProductNDC>0338-0499</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prosol</ProprietaryName>
<NonProprietaryName>Valine, Lysine, Histidine, Isoleucine, Leucine, Phenylalanine, Threonine, Methionine, Tryptophan, Alanine, Glycine, Arginine, Proline, Glutamic Acid, Serine, Aspartic Acid And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19980826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020849</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VALINE; LYSINE ACETATE; HISTIDINE; ISOLEUCINE; LEUCINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE</SubstanceName>
<StrengthNumber>1.44; 1.35; 1.18; 1.08; 1.08; 1; 980; 760; 320; 2.76; 2.06; 1.96; 1.34; 1.02; 1.02; 600; 50</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROSOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. PROSOL may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>PROSOL 20% (amino acids) injection is a sterile, nonpyrogenic, hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. PROSOL is not for direct intravenous infusion. The formulas for the individual amino acids found in PROSOL are provided in Table 4. PROSOL contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0518-12</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0518-12) </PackageDescription>
<NDC11Code>00338-0518-12</NDC11Code>
<ProductNDC>0338-0518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017643</ApplicationNumber>
<LabelerName>Baxter Healthcare CORP</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0518-13</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0518-13) </PackageDescription>
<NDC11Code>00338-0518-13</NDC11Code>
<ProductNDC>0338-0518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017643</ApplicationNumber>
<LabelerName>Baxter Healthcare CORP</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0518-58</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-0518-58) </PackageDescription>
<NDC11Code>00338-0518-58</NDC11Code>
<ProductNDC>0338-0518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017643</ApplicationNumber>
<LabelerName>Baxter Healthcare CORP</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 10% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 10% (A 10% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 10% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 10% (A 10% Intravenous Fat Emulsion) has an osmolality of approximately 300 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 1.1 kcal per mL of Intralipid 10%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate), PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0519-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0519-04) </PackageDescription>
<NDC11Code>00338-0519-04</NDC11Code>
<ProductNDC>0338-0519</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020248</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid ® 20% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-inone or total nutrition admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid ® 20% (A 20% I.V. Fat Emulsion) Pharmacy Bulk Package is a sterile, non-pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid ® 20% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in the preparation of three-in-one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (44-62%), oleic (19-30%), palmitic (7-14%), linolenic (4-11%) and stearic (1.4-5.5%) 1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure. contain saturated and unsaturated fatty acids that abound in neutral fats. R 3 is primarily either the choline or ethanolamine ester of phosphoric acid. Phosphatidylcholine Phosphatidylethanolamine. Glycerin is chemically designated C 3H 8O 3and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid ® 20% (A 20% I.V. Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmol/liter of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid ® 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary container is manufactured from Excel ® film, a polypropylene based material comprised of three co-extruded layers. The plastic container is made from multilayered film specifically designed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0519-09</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0519-09) </PackageDescription>
<NDC11Code>00338-0519-09</NDC11Code>
<ProductNDC>0338-0519</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018449</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0519-13</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0519-13) </PackageDescription>
<NDC11Code>00338-0519-13</NDC11Code>
<ProductNDC>0338-0519</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018449</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0519-14</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0519-14) </PackageDescription>
<NDC11Code>00338-0519-14</NDC11Code>
<ProductNDC>0338-0519</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020248</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 20% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-in-one or total nutrition admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 20% (A 20% I.V. Fat Emulsion) is a sterile, non-pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid 20% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in preparation of three-in-one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or the ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% I.V. Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmol/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. This product is not made with natural rubber latex. The container is nontoxic and biologically inert. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0519-58</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-0519-58) </PackageDescription>
<NDC11Code>00338-0519-58</NDC11Code>
<ProductNDC>0338-0519</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018449</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 20% is indicated as a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 20% (A 20% Intravenous Fat Emulsion) is a sterile, non-pyrogenic fat emulsion prepared for intravenous administration as a source of calories and essential fatty acids. It is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. Whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 20% (A 20% Intravenous Fat Emulsion) has an osmolality of approximately 350 mOsmol/kg water (which represents 260 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5micron size. The total caloric value, including fat, phospholipid and glycerin, is 2.0 kcal per mL of Intralipid 20%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. The container is nontoxic and biologically inert. This product is not made with natural rubber latex. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-0520-13</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0520-13) </PackageDescription>
<NDC11Code>00338-0520-13</NDC11Code>
<ProductNDC>0338-0520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Intralipid</ProprietaryName>
<NonProprietaryName>I. V. Fat Emulsion</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019942</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SOYBEAN OIL</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intralipid® 30% Pharmacy Bulk Package is indicated for use in a pharmacy admixture program for the preparation of three-in-one or total nutrient admixtures (TNAs) to provide a source of calories and essential fatty acids for patients requiring parenteral nutrition for extended periods of time (usually for more than 5 days) and as a source of essential fatty acids for prevention of EFAD.</IndicationAndUsage>
<Description>Intralipid® 30% (A 30% I.V. Fat Emulsion) Pharmacy Bulk Package is a sterile, non- pyrogenic fat emulsion intended as a source of calories and essential fatty acids for use in a pharmacy admixture program. It is made up of 30% Soybean Oil, 1.2% Egg Yolk Phospholipids, 1.7% Glycerin, and Water for Injection. In addition, sodium hydroxide has been added to adjust the pH so that the final product pH is 8. pH range is 6 to 8.9. Intralipid 30% Pharmacy Bulk Package is not intended for direct infusion. It is a sterile dosage form which contains several single doses for use in the preparation of three-in- one or total nutrient admixtures (TNAs) in a pharmacy admixture program. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. whereare saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic acid (44-62%), oleic acid (19-30%), palmitic acid (7-14%), α-linolenic acid (4-11%) and stearic acid (1.4-5.5%)1. These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. Intralipid 30% (A 30% I.V. Fat Emulsion) has an osmolality of approximately 310 mOsmoL/kg water (which represents 200 mOsmoL/L of emulsion) and contains emulsified fat particles of approximately 0.5 micron size. The total caloric value, including fat, phospholipid and glycerin, is 3.0 kcal per mL of Intralipid 30%. The phospholipids present contribute 47 milligrams or approximately 1.5 mmol of phosphorus per 100 mL of the emulsion. The primary plastic container (BiofineTM) is made from multilayered film specifically designed for parenteral nutrition drug products. The film is polypropylene based comprising three co-extruded layers. It contains no plasticizers and exhibits virtually no leachables. The container does not contain DEHP (di(2-ethylhexyl) phthalate) or PVC. This product is not made with natural rubber latex. The container is nontoxic and biologically inert. The container-emulsion unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>0338-1013-41</NDCCode>
<PackageDescription>50 mL in 1 BAG (0338-1013-41) </PackageDescription>
<NDC11Code>00338-1013-41</NDC11Code>
<ProductNDC>0338-1013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxacillin</ProprietaryName>
<NonProprietaryName>Oxacillin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19891026</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050640</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OXACILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19891026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug. (See CLINICAL PHARMACOLOGY - Susceptibility Test Methods.). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin Injection, USP and other antibacterial drugs, Oxacillin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Oxacillin Injection, USP is a sterile injectable product containing oxacillin which is added as oxacillin sodium, a semisynthetic penicillin derived from the penicillin nucleus, 6-aminopenicillanic acid. The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4- isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C19H18N3NaO5SH2O. The molecular weight is 441.44. The structural formula of oxacillin sodium is as follows. Oxacillin Injection, USP is a frozen, iso-osmotic, sterile, nonpyrogenic premixed 50 mL solution containing 1 g or 2 g of oxacillin added as oxacillin sodium. Dextrose, USP has been added to the above dosages to adjust osmolality (approximately 1.5 g and 300 mg as dextrose hydrous to the 1 g and 2 g dosages respectively). Sodium Citrate Hydrous, USP has been added as a buffer (approximately 150 mg and 300 mg to the 1 g and 2 g dosages, respectively). The pH has been adjusted with hydrochloric acid and may have been adjusted with sodium hydroxide. The pH is 6.5 (6.0 to 8.5). The solution is intended for intravenous use after thawing to room temperature. This GALAXY container (PL 2040) is fabricated from a specially designed multilayer plastic (PL 2040). Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-1015-41</NDCCode>
<PackageDescription>50 mL in 1 BAG (0338-1015-41) </PackageDescription>
<NDC11Code>00338-1015-41</NDC11Code>
<ProductNDC>0338-1015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxacillin</ProprietaryName>
<NonProprietaryName>Oxacillin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19891026</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050640</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OXACILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19891026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug. (See CLINICAL PHARMACOLOGY - Susceptibility Test Methods.). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin Injection, USP and other antibacterial drugs, Oxacillin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Oxacillin Injection, USP is a sterile injectable product containing oxacillin which is added as oxacillin sodium, a semisynthetic penicillin derived from the penicillin nucleus, 6-aminopenicillanic acid. The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4- isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C19H18N3NaO5SH2O. The molecular weight is 441.44. The structural formula of oxacillin sodium is as follows. Oxacillin Injection, USP is a frozen, iso-osmotic, sterile, nonpyrogenic premixed 50 mL solution containing 2 g of oxacillin added as oxacillin sodium. Dextrose, USP has been added to the above dosages to adjust osmolality (approximately 300 mg as dextrose hydrous to the 2 g dosages). Sodium Citrate Hydrous, USP has been added as a buffer (approximately 300 mg to the 2 g dosage). The pH has been adjusted with hydrochloric acid and may have been adjusted with sodium hydroxide. The pH is 6.5 (6.0 to 8.5). The solution is intended for intravenous use after thawing to room temperature. This Galaxy container is fabricated from a specially designed multilayer plastic. Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-3551-48</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3551-48) </PackageDescription>
<NDC11Code>00338-3551-48</NDC11Code>
<ProductNDC>0338-3551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
</NDCList>