{
"NDC": [
{
"NDCCode": "0338-1130-03",
"PackageDescription": "500 mL in 1 BAG (0338-1130-03) ",
"NDC11Code": "00338-1130-03",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "0338-1130-04",
"PackageDescription": "1000 mL in 1 BAG (0338-1130-04) ",
"NDC11Code": "00338-1130-04",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "0338-1130-06",
"PackageDescription": "2000 mL in 1 BAG (0338-1130-06) ",
"NDC11Code": "00338-1130-06",
"ProductNDC": "0338-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premasol - Sulfite-free (amino Acid)",
"NonProprietaryName": "Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075880",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": "1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030619",
"SamplePackage": "N",
"IndicationAndUsage": "PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).",
"Description": "PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains."
},
{
"NDCCode": "36987-1130-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1130-3)",
"NDC11Code": "36987-1130-03",
"ProductNDC": "36987-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Egg White",
"NonProprietaryName": "Egg White",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "EGG WHITE",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Cell-mediated Immunity [PE],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Allergens [CS],Egg Proteins, Dietary [CS],Dietary Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "64220-1130-3",
"PackageDescription": "15 kg in 1 CANISTER (64220-1130-3)",
"NDC11Code": "64220-1130-03",
"ProductNDC": "64220-1130",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Paroxetine Hydrochloride Hemihydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20081001",
"EndMarketingDate": "20110201",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.",
"SubstanceName": "PAROXETINE HYDROCHLORIDE HEMIHYDRATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20110201"
},
{
"NDCCode": "70771-1130-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (70771-1130-3) ",
"NDC11Code": "70771-1130-03",
"ProductNDC": "70771-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trazodone Hydrochloride",
"NonProprietaryName": "Trazodone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205253",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TRAZODONE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171211",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1130-3",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-1130-3) ",
"NDC11Code": "71335-1130-03",
"ProductNDC": "71335-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204720",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"Description": "Glipizide extended-release tablets contain glipizide which is an oral sulfonylurea.The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide.Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921) (hypromellose, lactose monohydrate, titanium dioxide, triacetin and FD&C blue#2) (2.5 mg tablets), Opadry® white (YS-2-7063) (hypromellose, titanium dioxide and polyethylene glycol) (5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-277001) (shellac, ferrosoferric oxide, propylene glycol). System Components and PerformanceGlipizide extended-release tablets are similar in appearance to a conventional tablet. It consists, however, of an osmotically active drug core surrounded by a semipermeable membrane. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. The membrane surrounding the tablet is permeable to water but not to drug or osmotic excipients. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, resulting in the release of drug through a small, laser-drilled orifice in the membrane on the drug side of the tablet.The function of the glipizide extended-release tablets depends upon the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the GI tract. The biologically inert components of the tablet remain intact during GI transit and are eliminated in the feces as an insoluble shell."
},
{
"NDCCode": "83035-1130-3",
"PackageDescription": "60 g in 1 BOTTLE, DISPENSING (83035-1130-3) ",
"NDC11Code": "83035-1130-03",
"ProductNDC": "83035-1130",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "True Lido Cream",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240516",
"EndMarketingDate": "20241101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Singular Dreamer, Ltd dba True Marker",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240516",
"EndMarketingDatePackage": "20241101",
"SamplePackage": "N"
},
{
"NDCCode": "0338-0004-03",
"PackageDescription": "18 BOTTLE, PLASTIC in 1 CARTON (0338-0004-03) / 500 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00338-0004-03",
"ProductNDC": "0338-0004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19741231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017428",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "WATER",
"StrengthNumber": "100",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19741231",
"SamplePackage": "N",
"IndicationAndUsage": "Sterile Water for Irrigation is indicated for use as an irrigant.",
"Description": "Sterile Water for Irrigation contains water that is sterilized and packaged for use as an irrigant. No antimicrobial agent or other substance has been added. The pH is 5.5 (5.0 to 7.0). Sterile Water for Irrigation is hypotonic with an osmolarity of zero mOsmol/L. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the fluid significantly. Water in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The plastic pour bottle is fabricated from specially formulated polyolefin. The polyolefin is a copolymer of ethylene and propylene. The container requires no vapor barrier."
},
{
"NDCCode": "0338-0017-03",
"PackageDescription": "500 mL in 1 BAG (0338-0017-03) ",
"NDC11Code": "00338-0017-03",
"ProductNDC": "0338-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710304",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0023-03",
"PackageDescription": "500 mL in 1 BAG (0338-0023-03) ",
"NDC11Code": "00338-0023-03",
"ProductNDC": "0338-0023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710125",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016694",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710125",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0043-03",
"PackageDescription": "500 mL in 1 BAG (0338-0043-03) ",
"NDC11Code": "00338-0043-03",
"ProductNDC": "0338-0043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018016",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "4.5",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19790202",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.",
"Description": "Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0048-03",
"PackageDescription": "18 BOTTLE, PLASTIC in 1 CARTON (0338-0048-03) / 500 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00338-0048-03",
"ProductNDC": "0338-0048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19741231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017427",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "900",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19741231",
"SamplePackage": "N",
"IndicationAndUsage": "Isotonic solution for irrigation only. Not for injection.",
"Description": "0.9% Sodium Chloride Irrigation, USP. Each 100 mL contains: 900 mg Sodium Chloride, USP. No antimicrobial agent has been added. pH 5.5 (4.5 to 7.0). Osmolarity 308 mOsmol/L (calc.). Sterile, nonpyrogenic. Pour Bottle."
},
{
"NDCCode": "0338-0049-03",
"PackageDescription": "500 mL in 1 BAG (0338-0049-03) ",
"NDC11Code": "00338-0049-03",
"ProductNDC": "0338-0049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19701209",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016677",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19701209",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.",
"Description": "Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0054-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0054-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0054-03",
"ProductNDC": "0338-0054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19831101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019022",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19831101",
"SamplePackage": "N",
"IndicationAndUsage": "3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.",
"Description": "3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0056-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0056-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0056-03",
"ProductNDC": "0338-0056",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19831101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019022",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19831101",
"SamplePackage": "N",
"IndicationAndUsage": "3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.",
"Description": "3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0073-03",
"PackageDescription": "500 mL in 1 BAG (0338-0073-03)",
"NDC11Code": "00338-0073-03",
"ProductNDC": "0338-0073",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016697",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "2.5; 450",
"StrengthUnit": "g/100mL; mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2015-01-09"
},
{
"NDCCode": "0338-0077-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0077-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0077-03",
"ProductNDC": "0338-0077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19701208",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016689",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; 200",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19701208",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.",
"Description": "Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0081-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0081-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0081-03",
"ProductNDC": "0338-0081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016687",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; 330",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19710322",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.",
"Description": "Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0085-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0085-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0085-03",
"ProductNDC": "0338-0085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016683",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; 450",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19710322",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.",
"Description": "Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0089-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0089-03) / 500 mL in 1 BAG",
"NDC11Code": "00338-0089-03",
"ProductNDC": "0338-0089",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19701209",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; 900",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19701209",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.",
"Description": "Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0095-03",
"PackageDescription": "500 mL in 1 BAG (0338-0095-03)",
"NDC11Code": "00338-0095-03",
"ProductNDC": "0338-0095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016696",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "10; 900",
"StrengthUnit": "g/100mL; mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2015-01-09"
},
{
"NDCCode": "0338-0105-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0105-03) > 500 mL in 1 BAG",
"NDC11Code": "00338-0105-03",
"ProductNDC": "0338-0105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ringers",
"NonProprietaryName": "Sodium Chloride, Calcium Chloride, Potassium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016693",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE; CALCIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "8.6; .33; .3",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-03-08",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "0338-0117-03",
"PackageDescription": "500 mL in 1 BAG (0338-0117-03) ",
"NDC11Code": "00338-0117-03",
"ProductNDC": "0338-0117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers",
"NonProprietaryName": "Sodium Chloride, Potassium Chloride, Sodium Lactate And Calcium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016682",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE",
"StrengthNumber": "600; 310; 30; 20",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710322",
"SamplePackage": "N",
"IndicationAndUsage": "Lactated Ringer’s Injection is indicated for use as a source of water and electrolytes or as an alkalinizing agent in adults and pediatric patients.",
"Description": "Lactated Ringer’s Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. The VIAFLEX plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). Small amounts of its chemical components (e.g., di-2-ethylhexyl phthalate [DEHP]) may leach out within the expiration period. Animal tests, USP biological tests for plastic containers, and tissue culture toxicity studies have demonstrated that the container meets safety requirements. The container is overwrapped to provide protection from the physical environment and an additional moisture barrier."
},
{
"NDCCode": "0338-0125-03",
"PackageDescription": "500 mL in 1 BAG (0338-0125-03) ",
"NDC11Code": "00338-0125-03",
"ProductNDC": "0338-0125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers And Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride And Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016679",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE",
"StrengthNumber": "5; 600; 310; 30; 20",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19710322",
"SamplePackage": "N",
"IndicationAndUsage": "Lactated Ringer’s and Dextrose (5%) Injection is indicated for use as a source of water, electrolytes, and calories or as an alkalinizing agent in adults and pediatric patients.",
"Description": "Lactated Ringer’s and Dextrose (5%) Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single-dose container for intravenous administration. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. The VIAFLEX plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). Small amounts of its chemical components (e.g., di-2-ethylhexyl phthalate [DEHP]) may leach out within the expiration period. Animal tests, USP biological tests for plastic containers, and tissue culture toxicity studies have demonstrated that the container meets safety requirements. The container is overwrapped to provide protection from the physical environment and an additional moisture barrier."
},
{
"NDCCode": "0338-0129-03",
"PackageDescription": "500 mL in 1 BAG (0338-0129-03)",
"NDC11Code": "00338-0129-03",
"ProductNDC": "0338-0129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Lactate",
"NonProprietaryName": "Sodium Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016692",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM LACTATE",
"StrengthNumber": "1.87",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2015-05-01"
},
{
"NDCCode": "0338-0143-03",
"PackageDescription": "500 mL in 1 BAG (0338-0143-03) ",
"NDC11Code": "00338-0143-03",
"ProductNDC": "0338-0143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Electrolyte No. 48",
"NonProprietaryName": "Sodium Lactate, Potassium Chloride, Magnesium Chloride, Monobasic Potassium Phosphate, Sodium Chloride And Dextrose Monohydrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017484",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM LACTATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM CHLORIDE",
"StrengthNumber": "5; 260; 141; 31; 20; 12",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19790202",
"SamplePackage": "N",
"IndicationAndUsage": "5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) is indicated as a source of water, electrolytes, and calories or as an alkalinizing agent.",
"Description": "5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single dose container for intravenous administration. Each 100 mL contains 5 g Dextrose Hydrous, USP*, 260 mg Sodium Lactate (C3H5NaO3), 141 mg Potassium Chloride, USP (KCl), 31 mg Magnesium Chloride, USP (MgCl26H20), 20 mg Monobasic Potassium Phosphate, NF (KH2PO4), and 12 mg Sodium Chloride, USP (NaCl). It contains no antimicrobial agents. The pH is 5.0 (4.0 to 6.5). 5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 25 mEq sodium, 20 mEq potassium, 3 mEq magnesium, 24 mEq chloride, 23 mEq lactate and 3 mEq phosphate (as HPO42-). The osmolarity is 348 mOsmol/L (calc). Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. The caloric content is 180 kcal/L. Dextrose is derived from corn. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0147-03",
"PackageDescription": "24 BAG in 1 CARTON (0338-0147-03) > 500 mL in 1 BAG",
"NDC11Code": "00338-0147-03",
"ProductNDC": "0338-0147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plasma-lyte 56 And Dextrose",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, Potassium Acetate, Magnesium Acetate Tetrahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017385",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM ACETATE; MAGNESIUM ACETATE TETRAHYDRATE",
"StrengthNumber": "5; 234; 128; 32",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2015-12-18"
},
{
"NDCCode": "0338-0179-03",
"PackageDescription": "500 mL in 1 BAG (0338-0179-03) ",
"NDC11Code": "00338-0179-03",
"ProductNDC": "0338-0179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plasma-lyte 148",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017378",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "MAGNESIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM ACETATE; SODIUM CHLORIDE; SODIUM GLUCONATE",
"StrengthNumber": "30; 37; 368; 526; 502",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19790202",
"SamplePackage": "N",
"IndicationAndUsage": "PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) is indicated as a source of water and electrolytes or as an alkalinizing agent.",
"Description": "PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) is a sterile, nonpyrogenic isotonic solution in a single dose container for intravenous administration. Each 100 mL contains 526 mg of Sodium Chloride, USP (NaCl); 502 mg of Sodium Gluconate (C6H11NaO7); 368 mg of Sodium Acetate Trihydrate, USP (C2H3NaO23H2O); 37 mg of Potassium Chloride, USP (KCl); and 30 mg of Magnesium Chloride, USP (MgCl26H2O). It contains no antimicrobial agents. The pH is adjusted with hydrochloric acid. The pH is 5.5 (4.0 to 8.0). PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 140 mEq sodium, 5 mEq potassium, 3 mEq magnesium, 98 mEq chloride, 27 mEq acetate, and 23 mEq gluconate. The osmolarity is 294 mOsmol/L (calc). Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. The caloric content is 21 kcal/L. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0221-03",
"PackageDescription": "500 mL in 1 BAG (0338-0221-03) ",
"NDC11Code": "00338-0221-03",
"ProductNDC": "0338-0221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plasma-lyte A",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride And Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017378",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "526; 502; 368; 37; 30",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19790202",
"SamplePackage": "N",
"IndicationAndUsage": "PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) is indicated as a source of water and electrolytes or as an alkalinizing agent.",
"Description": "PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) is a sterile, nonpyrogenic isotonic solution in a single dose container for intravenous administration. Each 100 mL contains 526 mg of Sodium Chloride, USP (NaCl); 502 mg of Sodium Gluconate (C6H11NaO7); 368 mg of Sodium Acetate Trihydrate, USP (C2H3NaO23H2O); 37 mg of Potassium Chloride, USP (KCl); and 30 mg of Magnesium Chloride, USP (MgCl26H2O). It contains no antimicrobial agents. The pH is adjusted with sodium hydroxide. The pH is 7.4 (6.5 to 8.0). PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 140 mEq sodium, 5 mEq potassium, 3 mEq magnesium, 98 mEq chloride, 27 mEq acetate, and 23 mEq gluconate. The osmolarity is 294 mOsmol/L (calc). Normal physiologic osmolarity range is 280 to 310 mOsmol/L. The caloric content is 21 kcal/L. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0338-1130-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-1130-03) </PackageDescription>
<NDC11Code>00338-1130-03</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0338-1130-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-1130-04) </PackageDescription>
<NDC11Code>00338-1130-04</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>0338-1130-06</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1130-06) </PackageDescription>
<NDC11Code>00338-1130-06</NDC11Code>
<ProductNDC>0338-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premasol - Sulfite-free (amino Acid)</ProprietaryName>
<NonProprietaryName>Leucine, Lysine, Isoleucine, Valine, Histidine, Phenylalanine, Threonine, Methionine, Tryptophan, Tyrosine, N-acetyl-tyrosine, Arginine, Proline, Alanine, Glutamic Acide, Serine, Glycine, Aspartic Acid, Taurine, Cysteine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075880</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; LYSINE ACETATE; ISOLEUCINE; VALINE; HISTIDINE; PHENYLALANINE; THREONINE; METHIONINE; TRYPTOPHAN; TYROSINE; ARGININE; PROLINE; ALANINE; GLUTAMIC ACID; SERINE; GLYCINE; ASPARTIC ACID; TAURINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.4; .82; .82; .78; .48; .48; .42; .34; .2; .24; 1.2; .68; .54; .5; .38; .36; .32; 25; .016</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREMASOL 10% injection is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with PREMASOL 10% injection is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where: (1) the alimentary tract, by the oral, gastrostomy, or jejunostomy route, cannot or should not be used, or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutritional support, and vein tolerance (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>PREMASOL 10% injection is a sterile, nonpyrogenic, hypertonic solutions containing crystalline amino acids provided in a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period (e.g., di-2-ethylhexyl phthalate, DEHP, at not more than 0.2 part per million); however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Intravenous fat emulsion should not be administered in polyvinyl chloride (PVC) containers that use di-2-ethylhexyl phthalate (DEHP) as a plasticizer, because the fat emulsion facilitates the leaching of DEHP from these containers. Each 100 mL contains.</Description>
</NDC>
<NDC>
<NDCCode>36987-1130-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1130-3)</PackageDescription>
<NDC11Code>36987-1130-03</NDC11Code>
<ProductNDC>36987-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Egg White</ProprietaryName>
<NonProprietaryName>Egg White</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>EGG WHITE</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Cell-mediated Immunity [PE],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Allergens [CS],Egg Proteins, Dietary [CS],Dietary Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>64220-1130-3</NDCCode>
<PackageDescription>15 kg in 1 CANISTER (64220-1130-3)</PackageDescription>
<NDC11Code>64220-1130-03</NDC11Code>
<ProductNDC>64220-1130</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Paroxetine Hydrochloride Hemihydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20081001</StartMarketingDate>
<EndMarketingDate>20110201</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20110201</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70771-1130-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70771-1130-3) </PackageDescription>
<NDC11Code>70771-1130-03</NDC11Code>
<ProductNDC>70771-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trazodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Trazodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205253</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TRAZODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1130-3</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-1130-3) </PackageDescription>
<NDC11Code>71335-1130-03</NDC11Code>
<ProductNDC>71335-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204720</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Glipizide extended-release tablets contain glipizide which is an oral sulfonylurea.The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide.Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921) (hypromellose, lactose monohydrate, titanium dioxide, triacetin and FD&C blue#2) (2.5 mg tablets), Opadry® white (YS-2-7063) (hypromellose, titanium dioxide and polyethylene glycol) (5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-277001) (shellac, ferrosoferric oxide, propylene glycol). System Components and PerformanceGlipizide extended-release tablets are similar in appearance to a conventional tablet. It consists, however, of an osmotically active drug core surrounded by a semipermeable membrane. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. The membrane surrounding the tablet is permeable to water but not to drug or osmotic excipients. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, resulting in the release of drug through a small, laser-drilled orifice in the membrane on the drug side of the tablet.The function of the glipizide extended-release tablets depends upon the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the GI tract. The biologically inert components of the tablet remain intact during GI transit and are eliminated in the feces as an insoluble shell.</Description>
</NDC>
<NDC>
<NDCCode>83035-1130-3</NDCCode>
<PackageDescription>60 g in 1 BOTTLE, DISPENSING (83035-1130-3) </PackageDescription>
<NDC11Code>83035-1130-03</NDC11Code>
<ProductNDC>83035-1130</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>True Lido Cream</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240516</StartMarketingDate>
<EndMarketingDate>20241101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Singular Dreamer, Ltd dba True Marker</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240516</StartMarketingDatePackage>
<EndMarketingDatePackage>20241101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-0004-03</NDCCode>
<PackageDescription>18 BOTTLE, PLASTIC in 1 CARTON (0338-0004-03) / 500 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00338-0004-03</NDC11Code>
<ProductNDC>0338-0004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19741231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017428</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19741231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sterile Water for Irrigation is indicated for use as an irrigant.</IndicationAndUsage>
<Description>Sterile Water for Irrigation contains water that is sterilized and packaged for use as an irrigant. No antimicrobial agent or other substance has been added. The pH is 5.5 (5.0 to 7.0). Sterile Water for Irrigation is hypotonic with an osmolarity of zero mOsmol/L. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the fluid significantly. Water in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The plastic pour bottle is fabricated from specially formulated polyolefin. The polyolefin is a copolymer of ethylene and propylene. The container requires no vapor barrier.</Description>
</NDC>
<NDC>
<NDCCode>0338-0017-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0017-03) </PackageDescription>
<NDC11Code>00338-0017-03</NDC11Code>
<ProductNDC>0338-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0023-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0023-03) </PackageDescription>
<NDC11Code>00338-0023-03</NDC11Code>
<ProductNDC>0338-0023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710125</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016694</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution. Solutions in contact with the plastic container can leach out certain of its chemical components in small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. The safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0043-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0043-03) </PackageDescription>
<NDC11Code>00338-0043-03</NDC11Code>
<ProductNDC>0338-0043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018016</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>4.5</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0048-03</NDCCode>
<PackageDescription>18 BOTTLE, PLASTIC in 1 CARTON (0338-0048-03) / 500 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00338-0048-03</NDC11Code>
<ProductNDC>0338-0048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19741231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017427</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>900</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19741231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isotonic solution for irrigation only. Not for injection.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Irrigation, USP. Each 100 mL contains: 900 mg Sodium Chloride, USP. No antimicrobial agent has been added. pH 5.5 (4.5 to 7.0). Osmolarity 308 mOsmol/L (calc.). Sterile, nonpyrogenic. Pour Bottle.</Description>
</NDC>
<NDC>
<NDCCode>0338-0049-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0049-03) </PackageDescription>
<NDC11Code>00338-0049-03</NDC11Code>
<ProductNDC>0338-0049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19701209</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016677</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19701209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below. 0.45% Sodium Chloride Injection, USP contains 4.5 g/L Sodium Chloride, USP (NaCl) and is hypotonic with an osmolarity of 154 mOsmol/L (calc). It contains 77 mEq/L sodium and 77 mEq/L chloride. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0054-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0054-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0054-03</NDC11Code>
<ProductNDC>0338-0054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19831101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019022</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19831101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.</IndicationAndUsage>
<Description>3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0056-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0056-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0056-03</NDC11Code>
<ProductNDC>0338-0056</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19831101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019022</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19831101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>3% and 5% Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.</IndicationAndUsage>
<Description>3% and 5% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0073-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0073-03)</PackageDescription>
<NDC11Code>00338-0073-03</NDC11Code>
<ProductNDC>0338-0073</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016697</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>2.5; 450</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-01-09</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0077-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0077-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0077-03</NDC11Code>
<ProductNDC>0338-0077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19701208</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016689</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 200</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19701208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0081-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0081-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0081-03</NDC11Code>
<ProductNDC>0338-0081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016687</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 330</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0085-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0085-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0085-03</NDC11Code>
<ProductNDC>0338-0085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016683</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 450</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0089-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0089-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0089-03</NDC11Code>
<ProductNDC>0338-0089</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19701209</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 900</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19701209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0095-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0095-03)</PackageDescription>
<NDC11Code>00338-0095-03</NDC11Code>
<ProductNDC>0338-0095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016696</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>10; 900</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-01-09</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0105-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0105-03) > 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0105-03</NDC11Code>
<ProductNDC>0338-0105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Calcium Chloride, Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016693</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE; CALCIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>8.6; .33; .3</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-03-08</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0338-0117-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0117-03) </PackageDescription>
<NDC11Code>00338-0117-03</NDC11Code>
<ProductNDC>0338-0117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Potassium Chloride, Sodium Lactate And Calcium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016682</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>600; 310; 30; 20</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lactated Ringer’s Injection is indicated for use as a source of water and electrolytes or as an alkalinizing agent in adults and pediatric patients.</IndicationAndUsage>
<Description>Lactated Ringer’s Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. The VIAFLEX plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). Small amounts of its chemical components (e.g., di-2-ethylhexyl phthalate [DEHP]) may leach out within the expiration period. Animal tests, USP biological tests for plastic containers, and tissue culture toxicity studies have demonstrated that the container meets safety requirements. The container is overwrapped to provide protection from the physical environment and an additional moisture barrier.</Description>
</NDC>
<NDC>
<NDCCode>0338-0125-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0125-03) </PackageDescription>
<NDC11Code>00338-0125-03</NDC11Code>
<ProductNDC>0338-0125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers And Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride And Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016679</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 600; 310; 30; 20</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lactated Ringer’s and Dextrose (5%) Injection is indicated for use as a source of water, electrolytes, and calories or as an alkalinizing agent in adults and pediatric patients.</IndicationAndUsage>
<Description>Lactated Ringer’s and Dextrose (5%) Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single-dose container for intravenous administration. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. The VIAFLEX plastic container is fabricated from polyvinyl chloride (PL 146 Plastic). Small amounts of its chemical components (e.g., di-2-ethylhexyl phthalate [DEHP]) may leach out within the expiration period. Animal tests, USP biological tests for plastic containers, and tissue culture toxicity studies have demonstrated that the container meets safety requirements. The container is overwrapped to provide protection from the physical environment and an additional moisture barrier.</Description>
</NDC>
<NDC>
<NDCCode>0338-0129-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0129-03)</PackageDescription>
<NDC11Code>00338-0129-03</NDC11Code>
<ProductNDC>0338-0129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Lactate</ProprietaryName>
<NonProprietaryName>Sodium Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016692</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM LACTATE</SubstanceName>
<StrengthNumber>1.87</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-05-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0143-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0143-03) </PackageDescription>
<NDC11Code>00338-0143-03</NDC11Code>
<ProductNDC>0338-0143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Electrolyte No. 48</ProprietaryName>
<NonProprietaryName>Sodium Lactate, Potassium Chloride, Magnesium Chloride, Monobasic Potassium Phosphate, Sodium Chloride And Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017484</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM LACTATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 260; 141; 31; 20; 12</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) is indicated as a source of water, electrolytes, and calories or as an alkalinizing agent.</IndicationAndUsage>
<Description>5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single dose container for intravenous administration. Each 100 mL contains 5 g Dextrose Hydrous, USP*, 260 mg Sodium Lactate (C3H5NaO3), 141 mg Potassium Chloride, USP (KCl), 31 mg Magnesium Chloride, USP (MgCl26H20), 20 mg Monobasic Potassium Phosphate, NF (KH2PO4), and 12 mg Sodium Chloride, USP (NaCl). It contains no antimicrobial agents. The pH is 5.0 (4.0 to 6.5). 5% Dextrose and Electrolyte No. 48 Injection (Multiple Electrolytes and Dextrose Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 25 mEq sodium, 20 mEq potassium, 3 mEq magnesium, 24 mEq chloride, 23 mEq lactate and 3 mEq phosphate (as HPO42-). The osmolarity is 348 mOsmol/L (calc). Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. The caloric content is 180 kcal/L. Dextrose is derived from corn. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0147-03</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0147-03) > 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0147-03</NDC11Code>
<ProductNDC>0338-0147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plasma-lyte 56 And Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, Potassium Acetate, Magnesium Acetate Tetrahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017385</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM ACETATE; MAGNESIUM ACETATE TETRAHYDRATE</SubstanceName>
<StrengthNumber>5; 234; 128; 32</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-12-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0179-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0179-03) </PackageDescription>
<NDC11Code>00338-0179-03</NDC11Code>
<ProductNDC>0338-0179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plasma-lyte 148</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017378</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>MAGNESIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM ACETATE; SODIUM CHLORIDE; SODIUM GLUCONATE</SubstanceName>
<StrengthNumber>30; 37; 368; 526; 502</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
<Description>PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) is a sterile, nonpyrogenic isotonic solution in a single dose container for intravenous administration. Each 100 mL contains 526 mg of Sodium Chloride, USP (NaCl); 502 mg of Sodium Gluconate (C6H11NaO7); 368 mg of Sodium Acetate Trihydrate, USP (C2H3NaO23H2O); 37 mg of Potassium Chloride, USP (KCl); and 30 mg of Magnesium Chloride, USP (MgCl26H2O). It contains no antimicrobial agents. The pH is adjusted with hydrochloric acid. The pH is 5.5 (4.0 to 8.0). PLASMA-LYTE 148 Injection (Multiple Electrolytes Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 140 mEq sodium, 5 mEq potassium, 3 mEq magnesium, 98 mEq chloride, 27 mEq acetate, and 23 mEq gluconate. The osmolarity is 294 mOsmol/L (calc). Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. The caloric content is 21 kcal/L. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0221-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0221-03) </PackageDescription>
<NDC11Code>00338-0221-03</NDC11Code>
<ProductNDC>0338-0221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plasma-lyte A</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride And Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017378</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>526; 502; 368; 37; 30</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
<Description>PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) is a sterile, nonpyrogenic isotonic solution in a single dose container for intravenous administration. Each 100 mL contains 526 mg of Sodium Chloride, USP (NaCl); 502 mg of Sodium Gluconate (C6H11NaO7); 368 mg of Sodium Acetate Trihydrate, USP (C2H3NaO23H2O); 37 mg of Potassium Chloride, USP (KCl); and 30 mg of Magnesium Chloride, USP (MgCl26H2O). It contains no antimicrobial agents. The pH is adjusted with sodium hydroxide. The pH is 7.4 (6.5 to 8.0). PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 140 mEq sodium, 5 mEq potassium, 3 mEq magnesium, 98 mEq chloride, 27 mEq acetate, and 23 mEq gluconate. The osmolarity is 294 mOsmol/L (calc). Normal physiologic osmolarity range is 280 to 310 mOsmol/L. The caloric content is 21 kcal/L. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
</NDCList>