{
"NDC": [
{
"NDCCode": "0378-9671-58",
"PackageDescription": "6 POUCH in 1 CARTON (0378-9671-58) > 5 AMPULE in 1 POUCH (0378-9671-98) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9671-58",
"ProductNDC": "0378-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202496",
"LabelerName": "Mylan Pharmaceuticals, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N"
},
{
"NDCCode": "0378-9671-30",
"PackageDescription": "1 POUCH in 1 CARTON (0378-9671-30) > 30 AMPULE in 1 POUCH (0378-9671-64) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9671-30",
"ProductNDC": "0378-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202496",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2019-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.",
"Description": "The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "0378-9671-60",
"PackageDescription": "2 POUCH in 1 CARTON (0378-9671-60) > 30 AMPULE in 1 POUCH > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9671-60",
"ProductNDC": "0378-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202496",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2019-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.",
"Description": "The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "0378-9671-91",
"PackageDescription": "12 POUCH in 1 CARTON (0378-9671-91) > 5 AMPULE in 1 POUCH > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9671-91",
"ProductNDC": "0378-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202496",
"LabelerName": "Mylan Pharmaceuticals, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N"
},
{
"NDCCode": "0378-9671-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-9671-93) > 1 AMPULE in 1 POUCH (0378-9671-31) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9671-93",
"ProductNDC": "0378-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202496",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2019-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.",
"Description": "The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "0378-6988-58",
"PackageDescription": "6 POUCH in 1 CARTON (0378-6988-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL",
"NDC11Code": "00378-6988-58",
"ProductNDC": "0378-6988",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010321",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020950",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 3",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0378-6990-58",
"PackageDescription": "6 POUCH in 1 CARTON (0378-6990-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL",
"NDC11Code": "00378-6990-58",
"ProductNDC": "0378-6990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20110331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072652",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": ".83",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-05-05"
},
{
"NDCCode": "0378-8760-58",
"PackageDescription": "6 POUCH in 1 CARTON (0378-8760-58) > 5 VIAL, SINGLE-USE in 1 POUCH (0378-8760-98) > .4 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "00378-8760-58",
"ProductNDC": "0378-8760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205894",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220203",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.",
"Description": "Cyclosporine ophthalmic emulsion 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine USP, 0.05%. Inactives: anhydrous glycerin, carbomer copolymer type A, castor oil, polysorbate 80, water for injection, and sodium hydroxide to adjust pH."
},
{
"NDCCode": "0143-9671-10",
"PackageDescription": "10 VIAL in 1 CARTON (0143-9671-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9671-01) ",
"NDC11Code": "00143-9671-10",
"ProductNDC": "0143-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotetan",
"NonProprietaryName": "Cefotetan",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20111026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091031",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFOTETAN",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111026",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefotetan and other antibacterial drugs, cefotetan should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cefotetan for Injection, USP, as cefotetan disodium, is a sterile, semisynthetic, broad-spectrum, beta-lactamase resistant, cephalosporin (cephamycin) antibiotic for parenteral administration. It is the disodium salt of [6R-(6α,7α)]-7-[[[4-(2-amino-1-carboxy-2-oxoethylidene)-1,3-dithietan-2-yl]carbonyl]amino]-7-methoxy-3-[[(1-methyl-1H-tetrazol-5-yl)thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Structural formula:. Cefotetan for Injection, USP is supplied in vials containing 80 mg (3.5 mEq) of sodium per gram of cefotetan activity. It is a white to pale yellow powder which is very soluble in water. Reconstituted solutions of Cefotetan for Injection, USP are intended for intravenous and intramuscular administration. The solution varies from colorless to yellow depending on the concentration. The pH of freshly reconstituted solutions is usually between 4.5 to 6.5. Cefotetan for Injection, USP is available in two vial strengths. Each 1 gram vial contains cefotetan disodium equivalent to 1 gram cefotetan activity. Each 2 gram vial contains cefotetan disodium equivalent to 2 grams cefotetan activity."
},
{
"NDCCode": "22840-9671-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-9671-2) ",
"NDC11Code": "22840-9671-02",
"ProductNDC": "22840-9671",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Grass Smut Mix",
"NonProprietaryName": "Ustilago Cynodontis And Sporisorium Cruentum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS",
"StrengthNumber": ".05; .05",
"StrengthUnit": "g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "22840-9671-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-9671-4) ",
"NDC11Code": "22840-9671-04",
"ProductNDC": "22840-9671",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Grass Smut Mix",
"NonProprietaryName": "Ustilago Cynodontis And Sporisorium Cruentum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS",
"StrengthNumber": ".05; .05",
"StrengthUnit": "g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "22840-9671-5",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-9671-5) ",
"NDC11Code": "22840-9671-05",
"ProductNDC": "22840-9671",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Grass Smut Mix",
"NonProprietaryName": "Ustilago Cynodontis And Sporisorium Cruentum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS",
"StrengthNumber": ".05; .05",
"StrengthUnit": "g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "68788-9671-1",
"PackageDescription": "120 TABLET in 1 BOTTLE (68788-9671-1) ",
"NDC11Code": "68788-9671-01",
"ProductNDC": "68788-9671",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Low Dose Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130606",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20130606",
"SamplePackage": "N"
},
{
"NDCCode": "71335-9671-1",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (71335-9671-1) ",
"NDC11Code": "71335-9671-01",
"ProductNDC": "71335-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208677",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "225",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260317",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "71335-9671-2",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (71335-9671-2) ",
"NDC11Code": "71335-9671-02",
"ProductNDC": "71335-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208677",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "225",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260413",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "71335-9671-3",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (71335-9671-3) ",
"NDC11Code": "71335-9671-03",
"ProductNDC": "71335-9671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208677",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "225",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260413",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "0006-0072-58",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (0006-0072-58) ",
"NDC11Code": "00006-0072-58",
"ProductNDC": "0006-0072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Proscar",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19920619",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020180",
"LabelerName": "Merck Sharp & Dohme Corp.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "19920619",
"SamplePackage": "N"
},
{
"NDCCode": "0006-3514-58",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0006-3514-58) > 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00006-3514-58",
"ProductNDC": "0006-3514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primaxin",
"ProprietaryNameSuffix": "Iv",
"NonProprietaryName": "Imipenem And Cilastatin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19851126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050587",
"LabelerName": "Merck Sharp & Dohme Corp.",
"SubstanceName": "IMIPENEM; CILASTATIN SODIUM",
"StrengthNumber": "250; 250",
"StrengthUnit": "mg/100mL; mg/100mL",
"Pharm_Classes": "Dipeptidase Inhibitors [MoA],Renal Dehydropeptidase Inhibitor [EPC],Carbapenems [Chemical/Ingredient],Penem Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-26",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0006-3551-58",
"PackageDescription": "25 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (0006-3551-58) > 100 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "00006-3551-58",
"ProductNDC": "0006-3551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primaxin",
"ProprietaryNameSuffix": "Iv",
"NonProprietaryName": "Imipenem And Cilastatin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19870108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062756",
"LabelerName": "Merck Sharp & Dohme Corp.",
"SubstanceName": "IMIPENEM; CILASTATIN SODIUM",
"StrengthNumber": "250; 250",
"StrengthUnit": "mg/100mL; mg/100mL",
"Pharm_Classes": "Carbapenems [Chemical/Ingredient],Penem Antibacterial [EPC],Dipeptidase Inhibitors [MoA],Renal Dehydropeptidase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-26",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0006-4119-02",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0006-4119-02) > .5 mL in 1 VIAL, SINGLE-DOSE (0006-4119-01) ",
"NDC11Code": "00006-4119-02",
"ProductNDC": "0006-4119",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Gardasil 9",
"NonProprietaryName": "Human Papillomavirus 9-valent Vaccine, Recombinant",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20141210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125508",
"LabelerName": "Merck Sharp & Dohme Corp.",
"SubstanceName": "HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN",
"StrengthNumber": "30; 40; 60; 40; 20; 20; 20; 20; 20",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Pharm_Classes": "Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20141210",
"SamplePackage": "N"
},
{
"NDCCode": "0006-4119-03",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0006-4119-03) / .5 mL in 1 VIAL, SINGLE-DOSE (0006-4119-01) ",
"NDC11Code": "00006-4119-03",
"ProductNDC": "0006-4119",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Gardasil 9",
"NonProprietaryName": "Human Papillomavirus 9-valent Vaccine, Recombinant",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20141210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125508",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN",
"StrengthNumber": "30; 40; 60; 40; 20; 20; 20; 20; 20",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141210",
"SamplePackage": "N",
"IndicationAndUsage": "GARDASIL 9 is a vaccine indicated in girls and women 9 through 45 years of age for the prevention of the following diseases: 1 Cervical, vulvar, vaginal, anal, oropharyngeal and other head and neck cancers caused by Human Papillomavirus (HPV) types 16, 18, 31, 33, 45, 52, and 58. (1.1), 2 Genital warts (condyloma acuminata) caused by HPV types 6 and 11. (1.1).",
"Description": "GARDASIL 9, Human Papillomavirus 9-valent Vaccine, Recombinant, is a non-infectious recombinant 9-valent vaccine prepared from the purified virus-like particles (VLPs) of the major capsid (L1) protein of HPV Types 6, 11, 16, 18, 31, 33, 45, 52, and 58. The L1 proteins are produced by separate fermentations using recombinant Saccharomyces cerevisiae and self-assembled into VLPs. The fermentation process involves growth of S. cerevisiae on chemically-defined fermentation media which include vitamins, amino acids, mineral salts, and carbohydrates. The VLPs are released from the yeast cells by cell disruption and purified by a series of chemical and physical methods. The purified VLPs are adsorbed on preformed aluminum-containing adjuvant (Amorphous Aluminum Hydroxyphosphate Sulfate or AAHS). The 9-valent HPV VLP vaccine is a sterile liquid suspension that is prepared by combining the adsorbed VLPs of each HPV type and additional amounts of the aluminum-containing adjuvant and the final purification buffer. GARDASIL 9 is a sterile suspension for intramuscular administration. Each 0.5-mL dose contains approximately 30 mcg of HPV Type 6 L1 protein, 40 mcg of HPV Type 11 L1 protein, 60 mcg of HPV Type 16 L1 protein, 40 mcg of HPV Type 18 L1 protein, 20 mcg of HPV Type 31 L1 protein, 20 mcg of HPV Type 33 L1 protein, 20 mcg of HPV Type 45 L1 protein, 20 mcg of HPV Type 52 L1 protein, and 20 mcg of HPV Type 58 L1 protein. Each 0.5-mL dose of the vaccine also contains approximately 500 mcg of aluminum (provided as AAHS), 9.56 mg of sodium chloride, 0.78 mg of L-histidine, 50 mcg of polysorbate 80, 35 mcg of sodium borate, <7 mcg yeast protein, and water for injection. The product does not contain a preservative or antibiotics. After thorough agitation, GARDASIL 9 is a white, cloudy liquid."
},
{
"NDCCode": "0006-4121-02",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (0006-4121-02) / .5 mL in 1 SYRINGE, GLASS (0006-4121-01) ",
"NDC11Code": "00006-4121-02",
"ProductNDC": "0006-4121",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Gardasil 9",
"NonProprietaryName": "Human Papillomavirus 9-valent Vaccine, Recombinant",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20141210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125508",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN",
"StrengthNumber": "30; 40; 60; 40; 20; 20; 20; 20; 20",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141210",
"SamplePackage": "N",
"IndicationAndUsage": "GARDASIL 9 is a vaccine indicated in girls and women 9 through 45 years of age for the prevention of the following diseases: 1 Cervical, vulvar, vaginal, anal, oropharyngeal and other head and neck cancers caused by Human Papillomavirus (HPV) types 16, 18, 31, 33, 45, 52, and 58. (1.1), 2 Genital warts (condyloma acuminata) caused by HPV types 6 and 11. (1.1).",
"Description": "GARDASIL 9, Human Papillomavirus 9-valent Vaccine, Recombinant, is a non-infectious recombinant 9-valent vaccine prepared from the purified virus-like particles (VLPs) of the major capsid (L1) protein of HPV Types 6, 11, 16, 18, 31, 33, 45, 52, and 58. The L1 proteins are produced by separate fermentations using recombinant Saccharomyces cerevisiae and self-assembled into VLPs. The fermentation process involves growth of S. cerevisiae on chemically-defined fermentation media which include vitamins, amino acids, mineral salts, and carbohydrates. The VLPs are released from the yeast cells by cell disruption and purified by a series of chemical and physical methods. The purified VLPs are adsorbed on preformed aluminum-containing adjuvant (Amorphous Aluminum Hydroxyphosphate Sulfate or AAHS). The 9-valent HPV VLP vaccine is a sterile liquid suspension that is prepared by combining the adsorbed VLPs of each HPV type and additional amounts of the aluminum-containing adjuvant and the final purification buffer. GARDASIL 9 is a sterile suspension for intramuscular administration. Each 0.5-mL dose contains approximately 30 mcg of HPV Type 6 L1 protein, 40 mcg of HPV Type 11 L1 protein, 60 mcg of HPV Type 16 L1 protein, 40 mcg of HPV Type 18 L1 protein, 20 mcg of HPV Type 31 L1 protein, 20 mcg of HPV Type 33 L1 protein, 20 mcg of HPV Type 45 L1 protein, 20 mcg of HPV Type 52 L1 protein, and 20 mcg of HPV Type 58 L1 protein. Each 0.5-mL dose of the vaccine also contains approximately 500 mcg of aluminum (provided as AAHS), 9.56 mg of sodium chloride, 0.78 mg of L-histidine, 50 mcg of polysorbate 80, 35 mcg of sodium borate, <7 mcg yeast protein, and water for injection. The product does not contain a preservative or antibiotics. After thorough agitation, GARDASIL 9 is a white, cloudy liquid."
},
{
"NDCCode": "0006-5084-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0006-5084-01) ",
"NDC11Code": "00006-5084-01",
"ProductNDC": "0006-5084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lipfendra",
"NonProprietaryName": "Lipfendra",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220848",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "ENLICITIDE DECANOATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260715",
"SamplePackage": "N",
"IndicationAndUsage": "LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.",
"Description": "LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent."
},
{
"NDCCode": "0006-5084-59",
"PackageDescription": "1 BOTTLE in 1 CARTON (0006-5084-59) / 7 TABLET, FILM COATED in 1 BOTTLE (0006-5084-58) ",
"NDC11Code": "00006-5084-59",
"ProductNDC": "0006-5084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lipfendra",
"NonProprietaryName": "Lipfendra",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220848",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "ENLICITIDE DECANOATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260715",
"SamplePackage": "Y",
"IndicationAndUsage": "LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.",
"Description": "LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent."
},
{
"NDCCode": "0006-5331-58",
"PackageDescription": "1 BOTTLE in 1 CARTON (0006-5331-58) / 90 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "00006-5331-58",
"ProductNDC": "0006-5331",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Welireg",
"NonProprietaryName": "Belzutifan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215383",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "BELZUTIFAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Hypoxia-inducible Factor 2 alpha Inhibitors [MoA], Hypoxia-inducible Factor Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230621",
"SamplePackage": "Y",
"IndicationAndUsage": "WELIREG is a hypoxia-inducible factor inhibitor indicated. von Hippel-Lindau (VHL) disease: 1 for treatment of adult patients with von Hippel-Lindau (VHL) disease who require therapy for associated renal cell carcinoma (RCC), central nervous system (CNS) hemangioblastomas, or pancreatic neuroendocrine tumors (pNET), not requiring immediate surgery. (1.1).",
"Description": "Belzutifan is an inhibitor of hypoxia-inducible factor-2α (HIF-2α). The chemical name of belzutifan is 3-[[(1S,2S,3R)-2,3-Difluoro-2,3-dihydro-1-hydroxy-7-(methylsulfonyl)-1H-inden-4-yl]oxy]-5-fluorobenzonitrile. The molecular formula is C17H12F3NO4S and the molecular weight is 383.34 Daltons. The chemical structure is. Belzutifan is a white to light brown powder that is soluble in acetonitrile, dimethoxyethane, and acetone, sparingly soluble in ethyl acetate, very slightly soluble in isopropanol and toluene, and insoluble in water. WELIREG is supplied as blue, film-coated tablets for oral use containing 40 mg of belzutifan together with croscarmellose sodium, hypromellose acetate succinate, magnesium stearate, mannitol, microcrystalline cellulose, and silicon dioxide, as inactive ingredients. In addition, the film-coating contains FD&C Blue #2 aluminum lake, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide."
},
{
"NDCCode": "0009-0017-58",
"PackageDescription": "10 TABLET in 1 BOTTLE (0009-0017-58) ",
"NDC11Code": "00009-0017-58",
"ProductNDC": "0009-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Halcion",
"NonProprietaryName": "Triazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19821115",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017892",
"LabelerName": "Pharmacia & Upjohn Company LLC",
"SubstanceName": "TRIAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19821115",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N"
},
{
"NDCCode": "0019-1188-27",
"PackageDescription": "20 BOX in 1 CARTON (0019-1188-27) > 1 SYRINGE, PLASTIC in 1 BOX > 125 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00019-1188-27",
"ProductNDC": "0019-1188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20120901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021569",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120901",
"SamplePackage": "N",
"IndicationAndUsage": "125 mL Syringe: Sodium Chloride Injection USP 0.9% is indicated for use in flushing compatible contrast agents through Liebel-Flarsheim intravenous administration sets into indwelling intravascular access devices only when delivered by the following Liebel-Flarsheim power injectors: Angiomat®, Illumena®, Illumena® Néo, CT9000®, CT9000® ADV, Optistat®, Optivantage® and Optistar Elite.",
"Description": "Sodium Chloride Injection USP 0.9% is a formulation of sodium chloride in Water for Intravascular Injection. No preservative, antimicrobial agent or buffer is added. Sodium Chloride Injection USP 0.9% is provided as a sterile, nonpyrogenic, clear, colorless, odorless solution. Molecular formula = NaCl MW = 58.44Each mL of Sodium Chloride Injection USP 0.9% contains 9 mg of sodium chloride. The pH is 4.5 to 7.0. The osmolarity is 308 mOsm/L (calc.). Sodium Chloride Injection USP 0.9% is provided in a 125 mL syringe with a 125 mL fill. The syringes are for single patient use and are disposable and not meant for reuse."
},
{
"NDCCode": "0019-1188-81",
"PackageDescription": "20 BOX in 1 CARTON (0019-1188-81) > 1 SYRINGE, PLASTIC in 1 BOX > 125 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00019-1188-81",
"ProductNDC": "0019-1188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20120901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021569",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120901",
"SamplePackage": "N",
"IndicationAndUsage": "125 mL Syringe: Sodium Chloride Injection USP 0.9% is indicated for use in flushing compatible contrast agents through Liebel-Flarsheim intravenous administration sets into indwelling intravascular access devices only when delivered by the following Liebel-Flarsheim power injectors: Angiomat®, Illumena®, Illumena® Néo, CT9000®, CT9000® ADV, Optistat®, Optivantage® and Optistar Elite.",
"Description": "Sodium Chloride Injection USP 0.9% is a formulation of sodium chloride in Water for Intravascular Injection. No preservative, antimicrobial agent or buffer is added. Sodium Chloride Injection USP 0.9% is provided as a sterile, nonpyrogenic, clear, colorless, odorless solution. Molecular formula = NaCl MW = 58.44Each mL of Sodium Chloride Injection USP 0.9% contains 9 mg of sodium chloride. The pH is 4.5 to 7.0. The osmolarity is 308 mOsm/L (calc.). Sodium Chloride Injection USP 0.9% is provided in a 125 mL syringe with a 125 mL fill. The syringes are for single patient use and are disposable and not meant for reuse."
},
{
"NDCCode": "0023-3205-02",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0023-3205-02) / 2.5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00023-3205-02",
"ProductNDC": "0023-3205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lumigan",
"NonProprietaryName": "Bimatoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20100910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022184",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "BIMATOPROST",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100910",
"SamplePackage": "Y",
"IndicationAndUsage": "LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.",
"Description": "LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1-pentenyl]cyclopentyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is very soluble in ethyl alcohol and methyl alcohol and slightly soluble in water. LUMIGAN® 0.01% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. LUMIGAN® 0.01% contains Active: bimatoprost 0.1 mg/mL; Inactives: benzalkonium chloride 0.2 mg/mL; sodium chloride; sodium phosphate, dibasic; citric acid; and purified water. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8-7.8."
},
{
"NDCCode": "0023-3205-03",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0023-3205-03) / 2.5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00023-3205-03",
"ProductNDC": "0023-3205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lumigan",
"NonProprietaryName": "Bimatoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20100910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022184",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "BIMATOPROST",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100910",
"SamplePackage": "N",
"IndicationAndUsage": "LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.",
"Description": "LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1-pentenyl]cyclopentyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is very soluble in ethyl alcohol and methyl alcohol and slightly soluble in water. LUMIGAN® 0.01% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. LUMIGAN® 0.01% contains Active: bimatoprost 0.1 mg/mL; Inactives: benzalkonium chloride 0.2 mg/mL; sodium chloride; sodium phosphate, dibasic; citric acid; and purified water. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8-7.8."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0378-9671-58</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0378-9671-58) > 5 AMPULE in 1 POUCH (0378-9671-98) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9671-58</NDC11Code>
<ProductNDC>0378-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202496</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-9671-30</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0378-9671-30) > 30 AMPULE in 1 POUCH (0378-9671-64) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9671-30</NDC11Code>
<ProductNDC>0378-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202496</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
<Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>0378-9671-60</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (0378-9671-60) > 30 AMPULE in 1 POUCH > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9671-60</NDC11Code>
<ProductNDC>0378-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202496</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
<Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>0378-9671-91</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (0378-9671-91) > 5 AMPULE in 1 POUCH > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9671-91</NDC11Code>
<ProductNDC>0378-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202496</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-9671-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-9671-93) > 1 AMPULE in 1 POUCH (0378-9671-31) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9671-93</NDC11Code>
<ProductNDC>0378-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202496</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
<Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β -adrenergic bronchodilator chemically described as α 1-[( tert-butylamino) methyl]-4- hydroxy- m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3.1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3.1-2. Chemical structure of ipratropium bromide. Each 3 mL Sterile Unit-dose Vial contains 0.5 mg of ipratropium bromide (0.017%) and 3 mg Equivalent to 2.5 mg albuterol base albuterol sulfate (0.083%) in an isotonic, sterile, aqueous solution containing sodium chloride and 1 N hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>0378-6988-58</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0378-6988-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00378-6988-58</NDC11Code>
<ProductNDC>0378-6988</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010321</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020950</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 3</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0378-6990-58</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0378-6990-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00378-6990-58</NDC11Code>
<ProductNDC>0378-6990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20110331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072652</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.83</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-05-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>0378-8760-58</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0378-8760-58) > 5 VIAL, SINGLE-USE in 1 POUCH (0378-8760-98) > .4 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>00378-8760-58</NDC11Code>
<ProductNDC>0378-8760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205894</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.</IndicationAndUsage>
<Description>Cyclosporine ophthalmic emulsion 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine USP, 0.05%. Inactives: anhydrous glycerin, carbomer copolymer type A, castor oil, polysorbate 80, water for injection, and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0143-9671-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0143-9671-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9671-01) </PackageDescription>
<NDC11Code>00143-9671-10</NDC11Code>
<ProductNDC>0143-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotetan</ProprietaryName>
<NonProprietaryName>Cefotetan</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20111026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091031</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFOTETAN</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefotetan and other antibacterial drugs, cefotetan should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cefotetan for Injection, USP, as cefotetan disodium, is a sterile, semisynthetic, broad-spectrum, beta-lactamase resistant, cephalosporin (cephamycin) antibiotic for parenteral administration. It is the disodium salt of [6R-(6α,7α)]-7-[[[4-(2-amino-1-carboxy-2-oxoethylidene)-1,3-dithietan-2-yl]carbonyl]amino]-7-methoxy-3-[[(1-methyl-1H-tetrazol-5-yl)thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Structural formula:. Cefotetan for Injection, USP is supplied in vials containing 80 mg (3.5 mEq) of sodium per gram of cefotetan activity. It is a white to pale yellow powder which is very soluble in water. Reconstituted solutions of Cefotetan for Injection, USP are intended for intravenous and intramuscular administration. The solution varies from colorless to yellow depending on the concentration. The pH of freshly reconstituted solutions is usually between 4.5 to 6.5. Cefotetan for Injection, USP is available in two vial strengths. Each 1 gram vial contains cefotetan disodium equivalent to 1 gram cefotetan activity. Each 2 gram vial contains cefotetan disodium equivalent to 2 grams cefotetan activity.</Description>
</NDC>
<NDC>
<NDCCode>22840-9671-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-9671-2) </PackageDescription>
<NDC11Code>22840-9671-02</NDC11Code>
<ProductNDC>22840-9671</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Grass Smut Mix</ProprietaryName>
<NonProprietaryName>Ustilago Cynodontis And Sporisorium Cruentum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS</SubstanceName>
<StrengthNumber>.05; .05</StrengthNumber>
<StrengthUnit>g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>22840-9671-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-9671-4) </PackageDescription>
<NDC11Code>22840-9671-04</NDC11Code>
<ProductNDC>22840-9671</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Grass Smut Mix</ProprietaryName>
<NonProprietaryName>Ustilago Cynodontis And Sporisorium Cruentum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS</SubstanceName>
<StrengthNumber>.05; .05</StrengthNumber>
<StrengthUnit>g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>22840-9671-5</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-9671-5) </PackageDescription>
<NDC11Code>22840-9671-05</NDC11Code>
<ProductNDC>22840-9671</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Grass Smut Mix</ProprietaryName>
<NonProprietaryName>Ustilago Cynodontis And Sporisorium Cruentum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>SPORISORIUM CRUENTUM; USTILAGO CYNODONTIS</SubstanceName>
<StrengthNumber>.05; .05</StrengthNumber>
<StrengthUnit>g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>68788-9671-1</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (68788-9671-1) </PackageDescription>
<NDC11Code>68788-9671-01</NDC11Code>
<ProductNDC>68788-9671</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Low Dose Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130606</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-9671-1</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (71335-9671-1) </PackageDescription>
<NDC11Code>71335-9671-01</NDC11Code>
<ProductNDC>71335-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208677</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>225</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-9671-2</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (71335-9671-2) </PackageDescription>
<NDC11Code>71335-9671-02</NDC11Code>
<ProductNDC>71335-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208677</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>225</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-9671-3</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (71335-9671-3) </PackageDescription>
<NDC11Code>71335-9671-03</NDC11Code>
<ProductNDC>71335-9671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208677</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>225</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0006-0072-58</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0006-0072-58) </PackageDescription>
<NDC11Code>00006-0072-58</NDC11Code>
<ProductNDC>0006-0072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Proscar</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920619</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020180</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme Corp.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0006-3514-58</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0006-3514-58) > 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00006-3514-58</NDC11Code>
<ProductNDC>0006-3514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primaxin</ProprietaryName>
<ProprietaryNameSuffix>Iv</ProprietaryNameSuffix>
<NonProprietaryName>Imipenem And Cilastatin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19851126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050587</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme Corp.</LabelerName>
<SubstanceName>IMIPENEM; CILASTATIN SODIUM</SubstanceName>
<StrengthNumber>250; 250</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Dipeptidase Inhibitors [MoA],Renal Dehydropeptidase Inhibitor [EPC],Carbapenems [Chemical/Ingredient],Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-26</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0006-3551-58</NDCCode>
<PackageDescription>25 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (0006-3551-58) > 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>00006-3551-58</NDC11Code>
<ProductNDC>0006-3551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primaxin</ProprietaryName>
<ProprietaryNameSuffix>Iv</ProprietaryNameSuffix>
<NonProprietaryName>Imipenem And Cilastatin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19870108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062756</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme Corp.</LabelerName>
<SubstanceName>IMIPENEM; CILASTATIN SODIUM</SubstanceName>
<StrengthNumber>250; 250</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Carbapenems [Chemical/Ingredient],Penem Antibacterial [EPC],Dipeptidase Inhibitors [MoA],Renal Dehydropeptidase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-26</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0006-4119-02</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0006-4119-02) > .5 mL in 1 VIAL, SINGLE-DOSE (0006-4119-01) </PackageDescription>
<NDC11Code>00006-4119-02</NDC11Code>
<ProductNDC>0006-4119</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Gardasil 9</ProprietaryName>
<NonProprietaryName>Human Papillomavirus 9-valent Vaccine, Recombinant</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20141210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125508</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme Corp.</LabelerName>
<SubstanceName>HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN</SubstanceName>
<StrengthNumber>30; 40; 60; 40; 20; 20; 20; 20; 20</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Pharm_Classes>Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS],Inactivated Human Papillomavirus Vaccine [EPC],Actively Acquired Immunity [PE],Papillomavirus Vaccines [CS],Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0006-4119-03</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0006-4119-03) / .5 mL in 1 VIAL, SINGLE-DOSE (0006-4119-01) </PackageDescription>
<NDC11Code>00006-4119-03</NDC11Code>
<ProductNDC>0006-4119</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Gardasil 9</ProprietaryName>
<NonProprietaryName>Human Papillomavirus 9-valent Vaccine, Recombinant</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20141210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125508</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN</SubstanceName>
<StrengthNumber>30; 40; 60; 40; 20; 20; 20; 20; 20</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GARDASIL 9 is a vaccine indicated in girls and women 9 through 45 years of age for the prevention of the following diseases: 1 Cervical, vulvar, vaginal, anal, oropharyngeal and other head and neck cancers caused by Human Papillomavirus (HPV) types 16, 18, 31, 33, 45, 52, and 58. (1.1), 2 Genital warts (condyloma acuminata) caused by HPV types 6 and 11. (1.1).</IndicationAndUsage>
<Description>GARDASIL 9, Human Papillomavirus 9-valent Vaccine, Recombinant, is a non-infectious recombinant 9-valent vaccine prepared from the purified virus-like particles (VLPs) of the major capsid (L1) protein of HPV Types 6, 11, 16, 18, 31, 33, 45, 52, and 58. The L1 proteins are produced by separate fermentations using recombinant Saccharomyces cerevisiae and self-assembled into VLPs. The fermentation process involves growth of S. cerevisiae on chemically-defined fermentation media which include vitamins, amino acids, mineral salts, and carbohydrates. The VLPs are released from the yeast cells by cell disruption and purified by a series of chemical and physical methods. The purified VLPs are adsorbed on preformed aluminum-containing adjuvant (Amorphous Aluminum Hydroxyphosphate Sulfate or AAHS). The 9-valent HPV VLP vaccine is a sterile liquid suspension that is prepared by combining the adsorbed VLPs of each HPV type and additional amounts of the aluminum-containing adjuvant and the final purification buffer. GARDASIL 9 is a sterile suspension for intramuscular administration. Each 0.5-mL dose contains approximately 30 mcg of HPV Type 6 L1 protein, 40 mcg of HPV Type 11 L1 protein, 60 mcg of HPV Type 16 L1 protein, 40 mcg of HPV Type 18 L1 protein, 20 mcg of HPV Type 31 L1 protein, 20 mcg of HPV Type 33 L1 protein, 20 mcg of HPV Type 45 L1 protein, 20 mcg of HPV Type 52 L1 protein, and 20 mcg of HPV Type 58 L1 protein. Each 0.5-mL dose of the vaccine also contains approximately 500 mcg of aluminum (provided as AAHS), 9.56 mg of sodium chloride, 0.78 mg of L-histidine, 50 mcg of polysorbate 80, 35 mcg of sodium borate, <7 mcg yeast protein, and water for injection. The product does not contain a preservative or antibiotics. After thorough agitation, GARDASIL 9 is a white, cloudy liquid.</Description>
</NDC>
<NDC>
<NDCCode>0006-4121-02</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (0006-4121-02) / .5 mL in 1 SYRINGE, GLASS (0006-4121-01) </PackageDescription>
<NDC11Code>00006-4121-02</NDC11Code>
<ProductNDC>0006-4121</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Gardasil 9</ProprietaryName>
<NonProprietaryName>Human Papillomavirus 9-valent Vaccine, Recombinant</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20141210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125508</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>HUMAN PAPILLOMAVIRUS TYPE 6 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 11 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 16 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 18 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 31 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 33 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 45 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 52 L1 CAPSID PROTEIN ANTIGEN; HUMAN PAPILLOMAVIRUS TYPE 58 L1 CAPSID PROTEIN ANTIGEN</SubstanceName>
<StrengthNumber>30; 40; 60; 40; 20; 20; 20; 20; 20</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Inactivated Human Papillomavirus Vaccine [EPC], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Papillomavirus Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GARDASIL 9 is a vaccine indicated in girls and women 9 through 45 years of age for the prevention of the following diseases: 1 Cervical, vulvar, vaginal, anal, oropharyngeal and other head and neck cancers caused by Human Papillomavirus (HPV) types 16, 18, 31, 33, 45, 52, and 58. (1.1), 2 Genital warts (condyloma acuminata) caused by HPV types 6 and 11. (1.1).</IndicationAndUsage>
<Description>GARDASIL 9, Human Papillomavirus 9-valent Vaccine, Recombinant, is a non-infectious recombinant 9-valent vaccine prepared from the purified virus-like particles (VLPs) of the major capsid (L1) protein of HPV Types 6, 11, 16, 18, 31, 33, 45, 52, and 58. The L1 proteins are produced by separate fermentations using recombinant Saccharomyces cerevisiae and self-assembled into VLPs. The fermentation process involves growth of S. cerevisiae on chemically-defined fermentation media which include vitamins, amino acids, mineral salts, and carbohydrates. The VLPs are released from the yeast cells by cell disruption and purified by a series of chemical and physical methods. The purified VLPs are adsorbed on preformed aluminum-containing adjuvant (Amorphous Aluminum Hydroxyphosphate Sulfate or AAHS). The 9-valent HPV VLP vaccine is a sterile liquid suspension that is prepared by combining the adsorbed VLPs of each HPV type and additional amounts of the aluminum-containing adjuvant and the final purification buffer. GARDASIL 9 is a sterile suspension for intramuscular administration. Each 0.5-mL dose contains approximately 30 mcg of HPV Type 6 L1 protein, 40 mcg of HPV Type 11 L1 protein, 60 mcg of HPV Type 16 L1 protein, 40 mcg of HPV Type 18 L1 protein, 20 mcg of HPV Type 31 L1 protein, 20 mcg of HPV Type 33 L1 protein, 20 mcg of HPV Type 45 L1 protein, 20 mcg of HPV Type 52 L1 protein, and 20 mcg of HPV Type 58 L1 protein. Each 0.5-mL dose of the vaccine also contains approximately 500 mcg of aluminum (provided as AAHS), 9.56 mg of sodium chloride, 0.78 mg of L-histidine, 50 mcg of polysorbate 80, 35 mcg of sodium borate, <7 mcg yeast protein, and water for injection. The product does not contain a preservative or antibiotics. After thorough agitation, GARDASIL 9 is a white, cloudy liquid.</Description>
</NDC>
<NDC>
<NDCCode>0006-5084-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0006-5084-01) </PackageDescription>
<NDC11Code>00006-5084-01</NDC11Code>
<ProductNDC>0006-5084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lipfendra</ProprietaryName>
<NonProprietaryName>Lipfendra</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220848</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>ENLICITIDE DECANOATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.</IndicationAndUsage>
<Description>LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>0006-5084-59</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0006-5084-59) / 7 TABLET, FILM COATED in 1 BOTTLE (0006-5084-58) </PackageDescription>
<NDC11Code>00006-5084-59</NDC11Code>
<ProductNDC>0006-5084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lipfendra</ProprietaryName>
<NonProprietaryName>Lipfendra</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220848</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>ENLICITIDE DECANOATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260715</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.</IndicationAndUsage>
<Description>LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>0006-5331-58</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0006-5331-58) / 90 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00006-5331-58</NDC11Code>
<ProductNDC>0006-5331</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Welireg</ProprietaryName>
<NonProprietaryName>Belzutifan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215383</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>BELZUTIFAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Hypoxia-inducible Factor 2 alpha Inhibitors [MoA], Hypoxia-inducible Factor Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230621</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>WELIREG is a hypoxia-inducible factor inhibitor indicated. von Hippel-Lindau (VHL) disease: 1 for treatment of adult patients with von Hippel-Lindau (VHL) disease who require therapy for associated renal cell carcinoma (RCC), central nervous system (CNS) hemangioblastomas, or pancreatic neuroendocrine tumors (pNET), not requiring immediate surgery. (1.1).</IndicationAndUsage>
<Description>Belzutifan is an inhibitor of hypoxia-inducible factor-2α (HIF-2α). The chemical name of belzutifan is 3-[[(1S,2S,3R)-2,3-Difluoro-2,3-dihydro-1-hydroxy-7-(methylsulfonyl)-1H-inden-4-yl]oxy]-5-fluorobenzonitrile. The molecular formula is C17H12F3NO4S and the molecular weight is 383.34 Daltons. The chemical structure is. Belzutifan is a white to light brown powder that is soluble in acetonitrile, dimethoxyethane, and acetone, sparingly soluble in ethyl acetate, very slightly soluble in isopropanol and toluene, and insoluble in water. WELIREG is supplied as blue, film-coated tablets for oral use containing 40 mg of belzutifan together with croscarmellose sodium, hypromellose acetate succinate, magnesium stearate, mannitol, microcrystalline cellulose, and silicon dioxide, as inactive ingredients. In addition, the film-coating contains FD&C Blue #2 aluminum lake, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0009-0017-58</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (0009-0017-58) </PackageDescription>
<NDC11Code>00009-0017-58</NDC11Code>
<ProductNDC>0009-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Halcion</ProprietaryName>
<NonProprietaryName>Triazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19821115</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017892</ApplicationNumber>
<LabelerName>Pharmacia & Upjohn Company LLC</LabelerName>
<SubstanceName>TRIAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19821115</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0019-1188-27</NDCCode>
<PackageDescription>20 BOX in 1 CARTON (0019-1188-27) > 1 SYRINGE, PLASTIC in 1 BOX > 125 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00019-1188-27</NDC11Code>
<ProductNDC>0019-1188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20120901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021569</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>125 mL Syringe: Sodium Chloride Injection USP 0.9% is indicated for use in flushing compatible contrast agents through Liebel-Flarsheim intravenous administration sets into indwelling intravascular access devices only when delivered by the following Liebel-Flarsheim power injectors: Angiomat®, Illumena®, Illumena® Néo, CT9000®, CT9000® ADV, Optistat®, Optivantage® and Optistar Elite.</IndicationAndUsage>
<Description>Sodium Chloride Injection USP 0.9% is a formulation of sodium chloride in Water for Intravascular Injection. No preservative, antimicrobial agent or buffer is added. Sodium Chloride Injection USP 0.9% is provided as a sterile, nonpyrogenic, clear, colorless, odorless solution. Molecular formula = NaCl MW = 58.44Each mL of Sodium Chloride Injection USP 0.9% contains 9 mg of sodium chloride. The pH is 4.5 to 7.0. The osmolarity is 308 mOsm/L (calc.). Sodium Chloride Injection USP 0.9% is provided in a 125 mL syringe with a 125 mL fill. The syringes are for single patient use and are disposable and not meant for reuse.</Description>
</NDC>
<NDC>
<NDCCode>0019-1188-81</NDCCode>
<PackageDescription>20 BOX in 1 CARTON (0019-1188-81) > 1 SYRINGE, PLASTIC in 1 BOX > 125 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00019-1188-81</NDC11Code>
<ProductNDC>0019-1188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20120901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021569</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>125 mL Syringe: Sodium Chloride Injection USP 0.9% is indicated for use in flushing compatible contrast agents through Liebel-Flarsheim intravenous administration sets into indwelling intravascular access devices only when delivered by the following Liebel-Flarsheim power injectors: Angiomat®, Illumena®, Illumena® Néo, CT9000®, CT9000® ADV, Optistat®, Optivantage® and Optistar Elite.</IndicationAndUsage>
<Description>Sodium Chloride Injection USP 0.9% is a formulation of sodium chloride in Water for Intravascular Injection. No preservative, antimicrobial agent or buffer is added. Sodium Chloride Injection USP 0.9% is provided as a sterile, nonpyrogenic, clear, colorless, odorless solution. Molecular formula = NaCl MW = 58.44Each mL of Sodium Chloride Injection USP 0.9% contains 9 mg of sodium chloride. The pH is 4.5 to 7.0. The osmolarity is 308 mOsm/L (calc.). Sodium Chloride Injection USP 0.9% is provided in a 125 mL syringe with a 125 mL fill. The syringes are for single patient use and are disposable and not meant for reuse.</Description>
</NDC>
<NDC>
<NDCCode>0023-3205-02</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0023-3205-02) / 2.5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00023-3205-02</NDC11Code>
<ProductNDC>0023-3205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lumigan</ProprietaryName>
<NonProprietaryName>Bimatoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20100910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022184</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>BIMATOPROST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100910</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1-pentenyl]cyclopentyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is very soluble in ethyl alcohol and methyl alcohol and slightly soluble in water. LUMIGAN® 0.01% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. LUMIGAN® 0.01% contains Active: bimatoprost 0.1 mg/mL; Inactives: benzalkonium chloride 0.2 mg/mL; sodium chloride; sodium phosphate, dibasic; citric acid; and purified water. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8-7.8.</Description>
</NDC>
<NDC>
<NDCCode>0023-3205-03</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0023-3205-03) / 2.5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00023-3205-03</NDC11Code>
<ProductNDC>0023-3205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lumigan</ProprietaryName>
<NonProprietaryName>Bimatoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20100910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022184</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>BIMATOPROST</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>LUMIGAN® (bimatoprost ophthalmic solution) 0.01% is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1-pentenyl]cyclopentyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is very soluble in ethyl alcohol and methyl alcohol and slightly soluble in water. LUMIGAN® 0.01% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. LUMIGAN® 0.01% contains Active: bimatoprost 0.1 mg/mL; Inactives: benzalkonium chloride 0.2 mg/mL; sodium chloride; sodium phosphate, dibasic; citric acid; and purified water. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8-7.8.</Description>
</NDC>
</NDCList>