{
"NDC": [
{
"NDCCode": "0409-1165-02",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-1165-02) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-1165-19) ",
"NDC11Code": "00409-1165-02",
"ProductNDC": "0409-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20050608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070585",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050608",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for Bupivacaine Hydrochloride and Epinephrine Injection is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple-dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. Epinephrine is a vasoconstrictor. It has the following structural formula. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg, or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg, or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. Bupivacaine Hydrochloride and Epinephrine Injection, USP is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.005 mg of epinephrine, with sodium chloride for isotonicity, 0.1 mg sodium metabisulfite as antioxidant, and 0.1 mg edetate calcium disodium anhydrous as stabilizer. The pH of these solutions is adjusted to between 3.3 and 5.5 with sodium hydroxide or hydrochloric acid. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of Bupivacaine Hydrochloride and Epinephrine Injection [0.5% (5 mg/mL) of bupivacaine] at 25 ºC is 1.007."
},
{
"NDCCode": "0409-1165-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-1165-01) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-1165-18) ",
"NDC11Code": "00409-1165-01",
"ProductNDC": "0409-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20050608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070585",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051206",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for Bupivacaine Hydrochloride and Epinephrine Injection is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple-dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. Epinephrine is a vasoconstrictor. It has the following structural formula. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg, or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg, or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. Bupivacaine Hydrochloride and Epinephrine Injection, USP is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.005 mg of epinephrine, with sodium chloride for isotonicity, 0.1 mg sodium metabisulfite as antioxidant, and 0.1 mg edetate calcium disodium anhydrous as stabilizer. The pH of these solutions is adjusted to between 3.3 and 5.5 with sodium hydroxide or hydrochloric acid. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of Bupivacaine Hydrochloride and Epinephrine Injection [0.5% (5 mg/mL) of bupivacaine] at 25 ºC is 1.007."
},
{
"NDCCode": "36987-1165-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1165-2)",
"NDC11Code": "36987-1165-02",
"ProductNDC": "36987-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pork",
"NonProprietaryName": "Pork",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "PORK",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1165-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-1165-2) ",
"NDC11Code": "37662-1165-02",
"ProductNDC": "37662-1165",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Niccolum Sulphuricum",
"NonProprietaryName": "Niccolum Sulphuricum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220802",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "NICKEL SULFATE HEXAHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220802",
"SamplePackage": "N"
},
{
"NDCCode": "64942-1165-2",
"PackageDescription": "48 g in 1 CONTAINER (64942-1165-2)",
"NDC11Code": "64942-1165-02",
"ProductNDC": "64942-1165",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Axe",
"ProprietaryNameSuffix": "Dry Dark Temptation",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "18.2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Uses· reduces underarm wetness· 24 hour protection."
},
{
"NDCCode": "65372-1165-2",
"PackageDescription": "20 kg in 1 DRUM (65372-1165-2) ",
"NDC11Code": "65372-1165-02",
"ProductNDC": "65372-1165",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cinacalcet Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120104",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Jubilant Biosys limited",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-19",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-JAN-12"
},
{
"NDCCode": "71335-1165-2",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-1165-2) ",
"NDC11Code": "71335-1165-02",
"ProductNDC": "71335-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202038",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190321",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3."
},
{
"NDCCode": "72934-1165-2",
"PackageDescription": "30 g in 1 BOTTLE, PUMP (72934-1165-2) ",
"NDC11Code": "72934-1165-02",
"ProductNDC": "72934-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Niacinamide 4% / Tretinoin 0.1%",
"NonProprietaryName": "Niacinamide 4% / Tretinoin 0.1%",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190501",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sincerus Florida, LLC",
"SubstanceName": "TRETINOIN; NIACINAMIDE",
"StrengthNumber": ".1; 4",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Retinoid [EPC],Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N"
},
{
"NDCCode": "0378-1165-05",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (0378-1165-05) ",
"NDC11Code": "00378-1165-05",
"ProductNDC": "0378-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076008",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010329",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato)."
},
{
"NDCCode": "0378-1165-80",
"PackageDescription": "180 TABLET in 1 BOTTLE, PLASTIC (0378-1165-80) ",
"NDC11Code": "00378-1165-80",
"ProductNDC": "0378-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076008",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010329",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato)."
},
{
"NDCCode": "0378-1165-91",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (0378-1165-91) ",
"NDC11Code": "00378-1165-91",
"ProductNDC": "0378-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076008",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010328",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato)."
},
{
"NDCCode": "0406-1165-05",
"PackageDescription": ".1 kg in 1 BOTTLE (0406-1165-05) ",
"NDC11Code": "00406-1165-05",
"ProductNDC": "0406-1165",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fentanyl Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "19990620",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SpecGx LLC",
"SubstanceName": "FENTANYL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20-JUN-99"
},
{
"NDCCode": "0406-1165-06",
"PackageDescription": "100 kg in 1 CAN (0406-1165-06) ",
"NDC11Code": "00406-1165-06",
"ProductNDC": "0406-1165",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fentanyl Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "19990620",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SpecGx LLC",
"SubstanceName": "FENTANYL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20-JUN-99"
},
{
"NDCCode": "43742-1165-1",
"PackageDescription": "960 mL in 1 BOTTLE, PLASTIC (43742-1165-1) ",
"NDC11Code": "43742-1165-01",
"ProductNDC": "43742-1165",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Helicobacter Pylori",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20180216",
"EndMarketingDate": "20250527",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Deseret Biologicals",
"SubstanceName": "HELICOBACTER PYLORI",
"StrengthNumber": "120",
"StrengthUnit": "[hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "16-FEB-18",
"EndMarketingDatePackage": "27-MAY-25"
},
{
"NDCCode": "51552-1165-6",
"PackageDescription": "500 g in 1 CONTAINER (51552-1165-6) ",
"NDC11Code": "51552-1165-06",
"ProductNDC": "51552-1165",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Paraffin Wax Beads",
"DosageFormName": "BEAD",
"StartMarketingDate": "20040901",
"EndMarketingDate": "20241012",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "PARAFFIN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "01-SEP-04",
"EndMarketingDatePackage": "12-OCT-24"
},
{
"NDCCode": "0338-0409-02",
"PackageDescription": "24 BAG in 1 CARTON (0338-0409-02) / 250 mL in 1 BAG",
"NDC11Code": "00338-0409-02",
"ProductNDC": "0338-0409",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Dextrose",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19810422",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018461",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810422",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride administered intravenously is specifically indicated in the acute management of (1) ventricular arrhythmias occurring during cardiac manipulations, such as cardiac surgery and (2) life-threatening arrhythmias which are ventricular in origin, such as occur during acute myocardial infarction.",
"Description": "Lidocaine Hydrochloride and 5% Dextrose Injection, USP is a sterile, nonpyrogenic solution prepared from lidocaine hydrochloride and dextrose in water for injection. It contains no antimicrobial agents. Lidocaine hydrochloride is designated chemically as 2-(Diethylamino) - 2', 6' - acetoxylidide monohydrochloride. The solution serves as a cardiac antiarrhythmic agent intended for intravenous use. Composition, osmolarity, pH and caloric content are shown in Table 1. The pH is adjusted with sodium hydroxide. This VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological standards for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0409-0009-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0009-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0009-02) ",
"NDC11Code": "00409-0009-25",
"ProductNDC": "0409-0009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20241216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077548",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241216",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9‑ tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3O∙HCl∙2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.46 mg of citric acid anhydrous, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "0409-0012-30",
"PackageDescription": "30 POUCH in 1 CASE (0409-0012-30) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0012-02) ",
"NDC11Code": "00409-0012-30",
"ProductNDC": "0409-0012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018916",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230227",
"SamplePackage": "N",
"IndicationAndUsage": "HEPARIN SODIUM IN SODIUM CHLORIDE INJECTION is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-Sulfated O-Sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of Heparin Sodium (representative subunits). HEPARIN SODIUM IN SODIUM CHLORIDE INJECTION is a sterile preparation of heparin sodium (derived from porcine intestinal mucosa) for intravenous administration. It contains no bacteriostatic or antimicrobial agent or added buffer. The solution may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH range is 6.1 (5.0 – 7.5) and the osmolarity mOsmol/L (calc.) is 155. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each mL of the 50 USP Units per mL preparations contains: 50 USP Units of heparin sodium, 4.5 mg sodium chloride and 0.1 mg edetate disodium, anhydrous added as a stabilizer. Each mL of the 100 USP Units per mL preparations contains: 100 USP Units of heparin sodium, 4.5 mg sodium chloride and 0.1 mg edetate disodium, anhydrous added as a stabilizer."
},
{
"NDCCode": "0409-0020-02",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0020-02) / 4 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0020-02",
"ProductNDC": "0409-0020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pemetrexed",
"NonProprietaryName": "Pemetrexed",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214218",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PEMETREXED DISODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Pemetrexed Injection is a folate analog metabolic inhibitor indicated: 1 In combination with cisplatin for the initial treatment of patients with locally advanced or metastatic, non-squamous, non-small cell lung cancer (NSCLC). (1.1), 2 As a single agent for the maintenance treatment of patients with locally advanced or metastatic, non -squamous NSCLC whose disease has not progressed after four cycles of platinum-based first-line chemotherapy. (1.1), 3 As a single agent for the treatment of patients with recurrent, metastatic non-squamous, NSCLC after prior chemotherapy. (1.1), 4 Limitations of Use: Pemetrexed Injection is not indicated for the treatment of patients with squamous cell, non-small cell lung cancer. (1.1), 5 Initial treatment, in combination with cisplatin, of patients with malignant pleural mesothelioma whose disease is unresectable or who are otherwise not candidates for curative surgery. (1.2).",
"Description": "Pemetrexed is a folate analog metabolic inhibitor. The drug substance, pemetrexed disodium (2.5 H2O), has the chemical name N-[[4-[2-(2-Amino-4-oxo-4,7-dihydro-1H-pyrrolo[2,3-d]pyrimidin-5-yl)ethyl]phenyl]carbonyl]-L-glutamic acid disodium, hemipentahydrate with a molecular formula of C20H19N5Na2O6 ∙2.5H2O and a molecular weight of 516.41. The structural formula is as follows. Pemetrexed Injection, 100 mg/4 mL, 500 mg/20 mL, and 1 g/40 mL are supplied as a sterile, preservative-free, clear, colorless to pale yellow ready-to-dilute solution in a single-dose vial for intravenous infusion. Each milliliter (mL) contains 25 mg pemetrexed (equivalent to 27.57 mg pemetrexed disodium), 1.2 mg monothioglycerol, water for injection and may contain sodium hydroxide for pH adjustment."
},
{
"NDCCode": "0409-0155-02",
"PackageDescription": "10 BOTTLE in 1 TRAY (0409-0155-02) / 100 mL in 1 BOTTLE (0409-0155-01) ",
"NDC11Code": "00409-0155-02",
"ProductNDC": "0409-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Precedex",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021038",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230103",
"SamplePackage": "N",
"IndicationAndUsage": "PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).",
"Description": "PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "0409-0201-02",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0201-02) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0201-02",
"ProductNDC": "0409-0201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022234",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110317",
"SamplePackage": "N",
"IndicationAndUsage": "Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).",
"Description": "Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "0409-0212-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-0212-02) / 20 mL in 1 VIAL, SINGLE-DOSE (0409-0212-11) ",
"NDC11Code": "00409-0212-02",
"ProductNDC": "0409-0212",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203280",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate Injection, is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-Dihydro-2-methyl-6-oxo[3,4'-bipyridine]-5-carbonitrile lactate and has the following structural formula. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate injection is available as a sterile aqueous solution of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials: Single-dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous in Water for Injection. The pH is adjusted to between 3.2 and 4.0 with lactic acid and/or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously."
},
{
"NDCCode": "0409-0805-02",
"PackageDescription": "25 VIAL, PATENT DELIVERY SYSTEM in 1 CARTON (0409-0805-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PATENT DELIVERY SYSTEM (0409-0805-12)",
"NDC11Code": "00409-0805-02",
"ProductNDC": "0409-0805",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201654",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "0409-0806-02",
"PackageDescription": "10 BOTTLE in 1 CARTON (0409-0806-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE",
"NDC11Code": "00409-0806-02",
"ProductNDC": "0409-0806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065247",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0409-1008-02",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-1008-02) > 2 mL in 1 VIAL, MULTI-DOSE (0409-1008-12) ",
"NDC11Code": "00409-1008-02",
"ProductNDC": "0409-1008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paricalcitol",
"NonProprietaryName": "Paricalcitol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201657",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PARICALCITOL",
"StrengthNumber": "5",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Cholecalciferol [CS], Vitamin D3 Analog [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141101",
"SamplePackage": "N"
},
{
"NDCCode": "0409-1029-02",
"PackageDescription": "20 BAG in 1 CARTON (0409-1029-02) > 500 mL in 1 BAG (0409-1029-11) ",
"NDC11Code": "00409-1029-02",
"ProductNDC": "0409-1029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voluven",
"NonProprietaryName": "Hydroxyethyl Starch 130/0.4",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100625",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN070012",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HYDROXYETHYL STARCH 130/0.4",
"StrengthNumber": "6",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Plasma Volume Expander [EPC],Increased Intravascular Volume [PE],Osmotic Activity [MoA],Starch [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20100625",
"SamplePackage": "N"
},
{
"NDCCode": "0409-1098-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1098-02) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1098-12) ",
"NDC11Code": "00409-1098-02",
"ProductNDC": "0409-1098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203236",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200317",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.5. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution provided in 5 mL, 10 mL, and 20 mL vials. The pH is adjusted to 3.0 to 3.8 with benzenesulfonic acid. : 1 The 5 mL single-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate., 2 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative., 3 The 20 mL single-dose vials contain 10 mg/mL cisatracurium, equivalent to 13.38 mg/mL cisatracurium besylate."
},
{
"NDCCode": "0409-1105-02",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-1105-02) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1105-22) ",
"NDC11Code": "00409-1105-02",
"ProductNDC": "0409-1105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090761",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130529",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated."
},
{
"NDCCode": "0409-1130-02",
"PackageDescription": "12 BAG in 1 CASE (0409-1130-02) > 250 mL in 1 BAG",
"NDC11Code": "00409-1130-02",
"ProductNDC": "0409-1130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050526",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "234",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2015-04-10"
},
{
"NDCCode": "0409-1135-02",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-1135-02) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-1135-02",
"ProductNDC": "0409-1135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050728",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2020-11-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20050728",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0409-1165-02</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-1165-02) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-1165-19) </PackageDescription>
<NDC11Code>00409-1165-02</NDC11Code>
<ProductNDC>0409-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20050608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070585</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for Bupivacaine Hydrochloride and Epinephrine Injection is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple-dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. Epinephrine is a vasoconstrictor. It has the following structural formula. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg, or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg, or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. Bupivacaine Hydrochloride and Epinephrine Injection, USP is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.005 mg of epinephrine, with sodium chloride for isotonicity, 0.1 mg sodium metabisulfite as antioxidant, and 0.1 mg edetate calcium disodium anhydrous as stabilizer. The pH of these solutions is adjusted to between 3.3 and 5.5 with sodium hydroxide or hydrochloric acid. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of Bupivacaine Hydrochloride and Epinephrine Injection [0.5% (5 mg/mL) of bupivacaine] at 25 ºC is 1.007.</Description>
</NDC>
<NDC>
<NDCCode>0409-1165-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-1165-01) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-1165-18) </PackageDescription>
<NDC11Code>00409-1165-01</NDC11Code>
<ProductNDC>0409-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20050608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070585</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride Injection/Bupivacaine Hydrochloride and Epinephrine Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for Bupivacaine Hydrochloride and Epinephrine Injection is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple-dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. Epinephrine is a vasoconstrictor. It has the following structural formula. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg, or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg, or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. Bupivacaine Hydrochloride and Epinephrine Injection, USP is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.005 mg of epinephrine, with sodium chloride for isotonicity, 0.1 mg sodium metabisulfite as antioxidant, and 0.1 mg edetate calcium disodium anhydrous as stabilizer. The pH of these solutions is adjusted to between 3.3 and 5.5 with sodium hydroxide or hydrochloric acid. For the multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of Bupivacaine Hydrochloride and Epinephrine Injection [0.5% (5 mg/mL) of bupivacaine] at 25 ºC is 1.007.</Description>
</NDC>
<NDC>
<NDCCode>36987-1165-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1165-2)</PackageDescription>
<NDC11Code>36987-1165-02</NDC11Code>
<ProductNDC>36987-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pork</ProprietaryName>
<NonProprietaryName>Pork</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>PORK</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1165-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-1165-2) </PackageDescription>
<NDC11Code>37662-1165-02</NDC11Code>
<ProductNDC>37662-1165</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Niccolum Sulphuricum</ProprietaryName>
<NonProprietaryName>Niccolum Sulphuricum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220802</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>NICKEL SULFATE HEXAHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64942-1165-2</NDCCode>
<PackageDescription>48 g in 1 CONTAINER (64942-1165-2)</PackageDescription>
<NDC11Code>64942-1165-02</NDC11Code>
<ProductNDC>64942-1165</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Axe</ProprietaryName>
<ProprietaryNameSuffix>Dry Dark Temptation</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18.2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses· reduces underarm wetness· 24 hour protection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65372-1165-2</NDCCode>
<PackageDescription>20 kg in 1 DRUM (65372-1165-2) </PackageDescription>
<NDC11Code>65372-1165-02</NDC11Code>
<ProductNDC>65372-1165</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cinacalcet Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120104</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Jubilant Biosys limited</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-19</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-JAN-12</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-1165-2</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-1165-2) </PackageDescription>
<NDC11Code>71335-1165-02</NDC11Code>
<ProductNDC>71335-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202038</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>72934-1165-2</NDCCode>
<PackageDescription>30 g in 1 BOTTLE, PUMP (72934-1165-2) </PackageDescription>
<NDC11Code>72934-1165-02</NDC11Code>
<ProductNDC>72934-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Niacinamide 4% / Tretinoin 0.1%</ProprietaryName>
<NonProprietaryName>Niacinamide 4% / Tretinoin 0.1%</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190501</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sincerus Florida, LLC</LabelerName>
<SubstanceName>TRETINOIN; NIACINAMIDE</SubstanceName>
<StrengthNumber>.1; 4</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC],Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-1165-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (0378-1165-05) </PackageDescription>
<NDC11Code>00378-1165-05</NDC11Code>
<ProductNDC>0378-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076008</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato).</Description>
</NDC>
<NDC>
<NDCCode>0378-1165-80</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE, PLASTIC (0378-1165-80) </PackageDescription>
<NDC11Code>00378-1165-80</NDC11Code>
<ProductNDC>0378-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076008</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010329</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato).</Description>
</NDC>
<NDC>
<NDCCode>0378-1165-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (0378-1165-91) </PackageDescription>
<NDC11Code>00378-1165-91</NDC11Code>
<ProductNDC>0378-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076008</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010328</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that are not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Buspirone hydrochloride tablets are supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and sodium starch glycolate (potato).</Description>
</NDC>
<NDC>
<NDCCode>0406-1165-05</NDCCode>
<PackageDescription>.1 kg in 1 BOTTLE (0406-1165-05) </PackageDescription>
<NDC11Code>00406-1165-05</NDC11Code>
<ProductNDC>0406-1165</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fentanyl Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19990620</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SpecGx LLC</LabelerName>
<SubstanceName>FENTANYL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-JUN-99</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0406-1165-06</NDCCode>
<PackageDescription>100 kg in 1 CAN (0406-1165-06) </PackageDescription>
<NDC11Code>00406-1165-06</NDC11Code>
<ProductNDC>0406-1165</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fentanyl Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19990620</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SpecGx LLC</LabelerName>
<SubstanceName>FENTANYL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-JUN-99</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>43742-1165-1</NDCCode>
<PackageDescription>960 mL in 1 BOTTLE, PLASTIC (43742-1165-1) </PackageDescription>
<NDC11Code>43742-1165-01</NDC11Code>
<ProductNDC>43742-1165</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Helicobacter Pylori</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20180216</StartMarketingDate>
<EndMarketingDate>20250527</EndMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Deseret Biologicals</LabelerName>
<SubstanceName>HELICOBACTER PYLORI</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>16-FEB-18</StartMarketingDatePackage>
<EndMarketingDatePackage>27-MAY-25</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>51552-1165-6</NDCCode>
<PackageDescription>500 g in 1 CONTAINER (51552-1165-6) </PackageDescription>
<NDC11Code>51552-1165-06</NDC11Code>
<ProductNDC>51552-1165</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Paraffin Wax Beads</NonProprietaryName>
<DosageFormName>BEAD</DosageFormName>
<StartMarketingDate>20040901</StartMarketingDate>
<EndMarketingDate>20241012</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>PARAFFIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>01-SEP-04</StartMarketingDatePackage>
<EndMarketingDatePackage>12-OCT-24</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0338-0409-02</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-0409-02) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0409-02</NDC11Code>
<ProductNDC>0338-0409</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Dextrose</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19810422</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018461</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride administered intravenously is specifically indicated in the acute management of (1) ventricular arrhythmias occurring during cardiac manipulations, such as cardiac surgery and (2) life-threatening arrhythmias which are ventricular in origin, such as occur during acute myocardial infarction.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and 5% Dextrose Injection, USP is a sterile, nonpyrogenic solution prepared from lidocaine hydrochloride and dextrose in water for injection. It contains no antimicrobial agents. Lidocaine hydrochloride is designated chemically as 2-(Diethylamino) - 2', 6' - acetoxylidide monohydrochloride. The solution serves as a cardiac antiarrhythmic agent intended for intravenous use. Composition, osmolarity, pH and caloric content are shown in Table 1. The pH is adjusted with sodium hydroxide. This VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological standards for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0409-0009-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0009-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0009-02) </PackageDescription>
<NDC11Code>00409-0009-25</NDC11Code>
<ProductNDC>0409-0009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20241216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077548</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9‑ tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3O∙HCl∙2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.46 mg of citric acid anhydrous, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>0409-0012-30</NDCCode>
<PackageDescription>30 POUCH in 1 CASE (0409-0012-30) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0012-02) </PackageDescription>
<NDC11Code>00409-0012-30</NDC11Code>
<ProductNDC>0409-0012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018916</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HEPARIN SODIUM IN SODIUM CHLORIDE INJECTION is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-Sulfated O-Sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of Heparin Sodium (representative subunits). HEPARIN SODIUM IN SODIUM CHLORIDE INJECTION is a sterile preparation of heparin sodium (derived from porcine intestinal mucosa) for intravenous administration. It contains no bacteriostatic or antimicrobial agent or added buffer. The solution may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH range is 6.1 (5.0 – 7.5) and the osmolarity mOsmol/L (calc.) is 155. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each mL of the 50 USP Units per mL preparations contains: 50 USP Units of heparin sodium, 4.5 mg sodium chloride and 0.1 mg edetate disodium, anhydrous added as a stabilizer. Each mL of the 100 USP Units per mL preparations contains: 100 USP Units of heparin sodium, 4.5 mg sodium chloride and 0.1 mg edetate disodium, anhydrous added as a stabilizer.</Description>
</NDC>
<NDC>
<NDCCode>0409-0020-02</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0020-02) / 4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0020-02</NDC11Code>
<ProductNDC>0409-0020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pemetrexed</ProprietaryName>
<NonProprietaryName>Pemetrexed</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214218</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PEMETREXED DISODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pemetrexed Injection is a folate analog metabolic inhibitor indicated: 1 In combination with cisplatin for the initial treatment of patients with locally advanced or metastatic, non-squamous, non-small cell lung cancer (NSCLC). (1.1), 2 As a single agent for the maintenance treatment of patients with locally advanced or metastatic, non -squamous NSCLC whose disease has not progressed after four cycles of platinum-based first-line chemotherapy. (1.1), 3 As a single agent for the treatment of patients with recurrent, metastatic non-squamous, NSCLC after prior chemotherapy. (1.1), 4 Limitations of Use: Pemetrexed Injection is not indicated for the treatment of patients with squamous cell, non-small cell lung cancer. (1.1), 5 Initial treatment, in combination with cisplatin, of patients with malignant pleural mesothelioma whose disease is unresectable or who are otherwise not candidates for curative surgery. (1.2).</IndicationAndUsage>
<Description>Pemetrexed is a folate analog metabolic inhibitor. The drug substance, pemetrexed disodium (2.5 H2O), has the chemical name N-[[4-[2-(2-Amino-4-oxo-4,7-dihydro-1H-pyrrolo[2,3-d]pyrimidin-5-yl)ethyl]phenyl]carbonyl]-L-glutamic acid disodium, hemipentahydrate with a molecular formula of C20H19N5Na2O6 ∙2.5H2O and a molecular weight of 516.41. The structural formula is as follows. Pemetrexed Injection, 100 mg/4 mL, 500 mg/20 mL, and 1 g/40 mL are supplied as a sterile, preservative-free, clear, colorless to pale yellow ready-to-dilute solution in a single-dose vial for intravenous infusion. Each milliliter (mL) contains 25 mg pemetrexed (equivalent to 27.57 mg pemetrexed disodium), 1.2 mg monothioglycerol, water for injection and may contain sodium hydroxide for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>0409-0155-02</NDCCode>
<PackageDescription>10 BOTTLE in 1 TRAY (0409-0155-02) / 100 mL in 1 BOTTLE (0409-0155-01) </PackageDescription>
<NDC11Code>00409-0155-02</NDC11Code>
<ProductNDC>0409-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Precedex</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021038</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).</IndicationAndUsage>
<Description>PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>0409-0201-02</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0201-02) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0201-02</NDC11Code>
<ProductNDC>0409-0201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022234</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
<Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>0409-0212-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-0212-02) / 20 mL in 1 VIAL, SINGLE-DOSE (0409-0212-11) </PackageDescription>
<NDC11Code>00409-0212-02</NDC11Code>
<ProductNDC>0409-0212</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203280</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate Injection, is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-Dihydro-2-methyl-6-oxo[3,4'-bipyridine]-5-carbonitrile lactate and has the following structural formula. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate injection is available as a sterile aqueous solution of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials: Single-dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous in Water for Injection. The pH is adjusted to between 3.2 and 4.0 with lactic acid and/or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
</NDC>
<NDC>
<NDCCode>0409-0805-02</NDCCode>
<PackageDescription>25 VIAL, PATENT DELIVERY SYSTEM in 1 CARTON (0409-0805-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PATENT DELIVERY SYSTEM (0409-0805-12)</PackageDescription>
<NDC11Code>00409-0805-02</NDC11Code>
<ProductNDC>0409-0805</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201654</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>0409-0806-02</NDCCode>
<PackageDescription>10 BOTTLE in 1 CARTON (0409-0806-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE</PackageDescription>
<NDC11Code>00409-0806-02</NDC11Code>
<ProductNDC>0409-0806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065247</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0409-1008-02</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-1008-02) > 2 mL in 1 VIAL, MULTI-DOSE (0409-1008-12) </PackageDescription>
<NDC11Code>00409-1008-02</NDC11Code>
<ProductNDC>0409-1008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paricalcitol</ProprietaryName>
<NonProprietaryName>Paricalcitol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201657</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PARICALCITOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Cholecalciferol [CS], Vitamin D3 Analog [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-1029-02</NDCCode>
<PackageDescription>20 BAG in 1 CARTON (0409-1029-02) > 500 mL in 1 BAG (0409-1029-11) </PackageDescription>
<NDC11Code>00409-1029-02</NDC11Code>
<ProductNDC>0409-1029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voluven</ProprietaryName>
<NonProprietaryName>Hydroxyethyl Starch 130/0.4</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100625</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN070012</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HYDROXYETHYL STARCH 130/0.4</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Plasma Volume Expander [EPC],Increased Intravascular Volume [PE],Osmotic Activity [MoA],Starch [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-1098-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1098-02) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1098-12) </PackageDescription>
<NDC11Code>00409-1098-02</NDC11Code>
<ProductNDC>0409-1098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203236</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.5. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution provided in 5 mL, 10 mL, and 20 mL vials. The pH is adjusted to 3.0 to 3.8 with benzenesulfonic acid. : 1 The 5 mL single-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate., 2 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative., 3 The 20 mL single-dose vials contain 10 mg/mL cisatracurium, equivalent to 13.38 mg/mL cisatracurium besylate.</Description>
</NDC>
<NDC>
<NDCCode>0409-1105-02</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-1105-02) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1105-22) </PackageDescription>
<NDC11Code>00409-1105-02</NDC11Code>
<ProductNDC>0409-1105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090761</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated.</Description>
</NDC>
<NDC>
<NDCCode>0409-1130-02</NDCCode>
<PackageDescription>12 BAG in 1 CASE (0409-1130-02) > 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-1130-02</NDC11Code>
<ProductNDC>0409-1130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050526</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>234</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-04-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>0409-1135-02</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-1135-02) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-1135-02</NDC11Code>
<ProductNDC>0409-1135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050728</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-11-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>