{
"NDC": [
{
"NDCCode": "0409-1209-65",
"PackageDescription": "800 AMPULE in 1 CASE (0409-1209-65) / 5 mL in 1 AMPULE (0409-1209-70) ",
"NDC11Code": "00409-1209-65",
"ProductNDC": "0409-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "19850913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088571",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "15; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050331",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-1209-01",
"PackageDescription": "10 AMPULE in 1 TRAY (0409-1209-01) / 5 mL in 1 AMPULE (0409-1209-10) ",
"NDC11Code": "00409-1209-01",
"ProductNDC": "0409-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "19850913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088571",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "15; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060202",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-1209-05",
"PackageDescription": "400 AMPULE in 1 CASE (0409-1209-05) / 5 mL in 1 AMPULE",
"NDC11Code": "00409-1209-05",
"ProductNDC": "0409-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "19850913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088571",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "15; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19850913",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-1144-05",
"PackageDescription": "25 VIAL in 1 CARTON (0409-1144-05) / 2 mL in 1 VIAL (0409-1144-65) ",
"NDC11Code": "00409-1144-05",
"ProductNDC": "0409-1144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070737",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110202",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil Hydrochloride Injection, USP is indicated for the following. Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong- Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration. Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes). In controlled studies in the United States, about 60% of patients with supraventricular tachycardia converted to normal sinus rhythm within 10 minutes after intravenous verapamil hydrochloride. Uncontrolled studies reported in the world literature describe a conversion rate of about 80%. About 70% of patients with atrial flutter and/or fibrillation with a faster ventricular rate respond with a decrease in ventricular rate of at least 20%. Conversion of atrial flutter or fibrillation to sinus rhythm is uncommon (about 10%) after verapamil hydrochloride and may reflect the spontaneous conversion rate, since the conversion rate after placebo was similar. Slowing of the ventricular rate in patients with atrial fibrillation/flutter lasts 30 to 60 minutes after a single injection. Because a small fraction (<1%) of patients treated with verapamil hydrochloride respond with life-threatening adverse responses (rapid ventricular rate in atrial flutter/fibrillation, and an accessory bypass tract, marked hypotension, or extreme bradycardia/asystole − see CONTRAINDICATIONS and WARNINGS), the initial use of verapamil hydrochloride injection should, if possible, be in a treatment setting with monitoring and resuscitation facilities, including D.C.-cardioversion capability (see ADVERSE REACTIONS, Suggested Treatment of Acute Cardiovascular Adverse Reactions). As familiarity with the patient's response is gained, use in an office setting may be acceptable. Cardioversion has been used safely and effectively after verapamil hydrochloride injection.",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.07. Molecular formula: C27H38N2O4 HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "0409-4713-65",
"PackageDescription": "800 AMPULE in 1 CASE (0409-4713-65) / 5 mL in 1 AMPULE (0409-4713-75) ",
"NDC11Code": "00409-4713-65",
"ProductNDC": "0409-4713",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080408",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050708",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple‑dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), monohydrochloride monohydrate and has the molecular weight is of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2OHClH2O, and has the following structural formula. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution containing lidocaine hydrochloride and sodium chloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as an antiseptic preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0) [See How Supplied/Storage and Handling (16)] for various sizes and strengths. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration."
},
{
"NDCCode": "0409-9633-05",
"PackageDescription": "10 CARTON in 1 CONTAINER (0409-9633-05) / 1 SYRINGE, PLASTIC in 1 CARTON / 4 mL in 1 SYRINGE, PLASTIC (0409-9633-65) ",
"NDC11Code": "00409-9633-05",
"ProductNDC": "0409-9633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075136",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051202",
"SamplePackage": "N"
},
{
"NDCCode": "43744-409-65",
"PackageDescription": "5000 g in 1 DRUM (43744-409-65)",
"NDC11Code": "43744-0409-65",
"ProductNDC": "43744-409",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110805",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "0409-0007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) ",
"NDC11Code": "00409-0007-10",
"ProductNDC": "0409-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-0147-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0147-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0147-01) ",
"NDC11Code": "00409-0147-10",
"ProductNDC": "0409-0147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089646",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3177-01",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3177-01) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3177-16) ",
"NDC11Code": "00409-3177-01",
"ProductNDC": "0409-3177",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20051101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089635",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "5; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051101",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3178-01",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-01) / 20 mL in 1 VIAL, MULTI-DOSE (0409-3178-16) ",
"NDC11Code": "00409-3178-01",
"ProductNDC": "0409-3178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050916",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3178-02",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-02) / 30 mL in 1 VIAL, MULTI-DOSE (0409-3178-17) ",
"NDC11Code": "00409-3178-02",
"ProductNDC": "0409-3178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050927",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3178-03",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-03) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3178-18) ",
"NDC11Code": "00409-3178-03",
"ProductNDC": "0409-3178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050919",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3181-01",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (0409-3181-01) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-3181-11) ",
"NDC11Code": "00409-3181-01",
"ProductNDC": "0409-3181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089645",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "15; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050131",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3182-01",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-01) / 20 mL in 1 VIAL, MULTI-DOSE (0409-3182-11) ",
"NDC11Code": "00409-3182-01",
"ProductNDC": "0409-3182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089646",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050915",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3182-02",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-02) / 30 mL in 1 VIAL, MULTI-DOSE (0409-3182-21) ",
"NDC11Code": "00409-3182-02",
"ProductNDC": "0409-3182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089646",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051229",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3182-03",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-03) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3182-31) ",
"NDC11Code": "00409-3182-03",
"ProductNDC": "0409-3182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20050623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089646",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050623",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-3183-01",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (0409-3183-01) / 20 mL in 1 VIAL, SINGLE-DOSE (0409-3183-11) ",
"NDC11Code": "00409-3183-01",
"ProductNDC": "0409-3183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089651",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 5",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050706",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-1105-02",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-1105-02) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1105-22) ",
"NDC11Code": "00409-1105-02",
"ProductNDC": "0409-1105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090761",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130529",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated."
},
{
"NDCCode": "0409-1109-01",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1109-01) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1109-11) ",
"NDC11Code": "00409-1109-01",
"ProductNDC": "0409-1109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090782",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130225",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated."
},
{
"NDCCode": "0409-1140-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-1140-01) > 2.5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-1140-01",
"ProductNDC": "0409-1140",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Argatroban",
"NonProprietaryName": "Argatroban",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204120",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ARGATROBAN",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170306",
"SamplePackage": "N",
"IndicationAndUsage": "Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin induced thrombocytopenia (HIT). (1.1), 2 As an anticoagulant in adults patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI). (1.2).",
"Description": "Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino] 1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5SH2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-dose amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection."
},
{
"NDCCode": "0409-1176-30",
"PackageDescription": "10 CARTRIDGE in 1 CARTON (0409-1176-30) / 1 mL in 1 CARTRIDGE (0409-1176-03) ",
"NDC11Code": "00409-1176-30",
"ProductNDC": "0409-1176",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20050825",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050825",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1178-30",
"PackageDescription": "10 CARTRIDGE in 1 CARTON (0409-1178-30) / 1 mL in 1 CARTRIDGE (0409-1178-03) ",
"NDC11Code": "00409-1178-30",
"ProductNDC": "0409-1178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20050913",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050913",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1179-30",
"PackageDescription": "10 CARTRIDGE in 1 CARTON (0409-1179-30) / 1 mL in 1 CARTRIDGE (0409-1179-03) ",
"NDC11Code": "00409-1179-30",
"ProductNDC": "0409-1179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20051012",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "75",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20051012",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1180-69",
"PackageDescription": "10 CARTRIDGE in 1 CARTON (0409-1180-69) / 1 mL in 1 CARTRIDGE (0409-1180-59) ",
"NDC11Code": "00409-1180-69",
"ProductNDC": "0409-1180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20050915",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-11-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050915",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1181-30",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0409-1181-30) / 30 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00409-1181-30",
"ProductNDC": "0409-1181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20060224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060224",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1362-01",
"PackageDescription": "10 SYRINGE in 1 CELLO PACK (0409-1362-01) / 1 mL in 1 SYRINGE (0409-1362-11) ",
"NDC11Code": "00409-1362-01",
"ProductNDC": "0409-1362",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210416",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-11-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210416",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1418-01",
"PackageDescription": "10 SYRINGE in 1 CELLO PACK (0409-1418-01) / 1 mL in 1 SYRINGE (0409-1418-11) ",
"NDC11Code": "00409-1418-01",
"ProductNDC": "0409-1418",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demerol",
"NonProprietaryName": "Meperidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210416",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021171",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MEPERIDINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-11-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210416",
"SamplePackage": "N",
"IndicationAndUsage": "DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C."
},
{
"NDCCode": "0409-1886-02",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0409-1886-02) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1886-22) ",
"NDC11Code": "00409-1886-02",
"ProductNDC": "0409-1886",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20121102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202869",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121102",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older. (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy. (1.2)oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy. (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible. (1.4).",
"Description": "Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0409-1886-05",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0409-1886-05) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1886-15) ",
"NDC11Code": "00409-1886-05",
"ProductNDC": "0409-1886",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202869",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180301",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older. (1.1) . Levetiracetam injection is indicated for adjunctive therapy for the treatment of:oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy. (1.2)oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy. (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible. (1.4) .",
"Description": "Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)]."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0409-1209-65</NDCCode>
<PackageDescription>800 AMPULE in 1 CASE (0409-1209-65) / 5 mL in 1 AMPULE (0409-1209-70) </PackageDescription>
<NDC11Code>00409-1209-65</NDC11Code>
<ProductNDC>0409-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>19850913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088571</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>15; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-1209-01</NDCCode>
<PackageDescription>10 AMPULE in 1 TRAY (0409-1209-01) / 5 mL in 1 AMPULE (0409-1209-10) </PackageDescription>
<NDC11Code>00409-1209-01</NDC11Code>
<ProductNDC>0409-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>19850913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088571</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>15; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-1209-05</NDCCode>
<PackageDescription>400 AMPULE in 1 CASE (0409-1209-05) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00409-1209-05</NDC11Code>
<ProductNDC>0409-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>19850913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088571</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>15; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19850913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-1144-05</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0409-1144-05) / 2 mL in 1 VIAL (0409-1144-65) </PackageDescription>
<NDC11Code>00409-1144-05</NDC11Code>
<ProductNDC>0409-1144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070737</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil Hydrochloride Injection, USP is indicated for the following. Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong- Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration. Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes). In controlled studies in the United States, about 60% of patients with supraventricular tachycardia converted to normal sinus rhythm within 10 minutes after intravenous verapamil hydrochloride. Uncontrolled studies reported in the world literature describe a conversion rate of about 80%. About 70% of patients with atrial flutter and/or fibrillation with a faster ventricular rate respond with a decrease in ventricular rate of at least 20%. Conversion of atrial flutter or fibrillation to sinus rhythm is uncommon (about 10%) after verapamil hydrochloride and may reflect the spontaneous conversion rate, since the conversion rate after placebo was similar. Slowing of the ventricular rate in patients with atrial fibrillation/flutter lasts 30 to 60 minutes after a single injection. Because a small fraction (<1%) of patients treated with verapamil hydrochloride respond with life-threatening adverse responses (rapid ventricular rate in atrial flutter/fibrillation, and an accessory bypass tract, marked hypotension, or extreme bradycardia/asystole − see CONTRAINDICATIONS and WARNINGS), the initial use of verapamil hydrochloride injection should, if possible, be in a treatment setting with monitoring and resuscitation facilities, including D.C.-cardioversion capability (see ADVERSE REACTIONS, Suggested Treatment of Acute Cardiovascular Adverse Reactions). As familiarity with the patient's response is gained, use in an office setting may be acceptable. Cardioversion has been used safely and effectively after verapamil hydrochloride injection.</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.07. Molecular formula: C27H38N2O4 HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>0409-4713-65</NDCCode>
<PackageDescription>800 AMPULE in 1 CASE (0409-4713-65) / 5 mL in 1 AMPULE (0409-4713-75) </PackageDescription>
<NDC11Code>00409-4713-65</NDC11Code>
<ProductNDC>0409-4713</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080408</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple‑dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), monohydrochloride monohydrate and has the molecular weight is of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2OHClH2O, and has the following structural formula. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution containing lidocaine hydrochloride and sodium chloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as an antiseptic preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0) [See How Supplied/Storage and Handling (16)] for various sizes and strengths. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>0409-9633-05</NDCCode>
<PackageDescription>10 CARTON in 1 CONTAINER (0409-9633-05) / 1 SYRINGE, PLASTIC in 1 CARTON / 4 mL in 1 SYRINGE, PLASTIC (0409-9633-65) </PackageDescription>
<NDC11Code>00409-9633-05</NDC11Code>
<ProductNDC>0409-9633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075136</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43744-409-65</NDCCode>
<PackageDescription>5000 g in 1 DRUM (43744-409-65)</PackageDescription>
<NDC11Code>43744-0409-65</NDC11Code>
<ProductNDC>43744-409</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110805</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0409-0007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) </PackageDescription>
<NDC11Code>00409-0007-10</NDC11Code>
<ProductNDC>0409-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0147-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0147-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0147-01) </PackageDescription>
<NDC11Code>00409-0147-10</NDC11Code>
<ProductNDC>0409-0147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089646</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3177-01</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3177-01) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3177-16) </PackageDescription>
<NDC11Code>00409-3177-01</NDC11Code>
<ProductNDC>0409-3177</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20051101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089635</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>5; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3178-01</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-01) / 20 mL in 1 VIAL, MULTI-DOSE (0409-3178-16) </PackageDescription>
<NDC11Code>00409-3178-01</NDC11Code>
<ProductNDC>0409-3178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3178-02</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-02) / 30 mL in 1 VIAL, MULTI-DOSE (0409-3178-17) </PackageDescription>
<NDC11Code>00409-3178-02</NDC11Code>
<ProductNDC>0409-3178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3178-03</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3178-03) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3178-18) </PackageDescription>
<NDC11Code>00409-3178-03</NDC11Code>
<ProductNDC>0409-3178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3181-01</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (0409-3181-01) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-3181-11) </PackageDescription>
<NDC11Code>00409-3181-01</NDC11Code>
<ProductNDC>0409-3181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089645</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>15; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3182-01</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-01) / 20 mL in 1 VIAL, MULTI-DOSE (0409-3182-11) </PackageDescription>
<NDC11Code>00409-3182-01</NDC11Code>
<ProductNDC>0409-3182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089646</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3182-02</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-02) / 30 mL in 1 VIAL, MULTI-DOSE (0409-3182-21) </PackageDescription>
<NDC11Code>00409-3182-02</NDC11Code>
<ProductNDC>0409-3182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089646</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3182-03</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-3182-03) / 50 mL in 1 VIAL, MULTI-DOSE (0409-3182-31) </PackageDescription>
<NDC11Code>00409-3182-03</NDC11Code>
<ProductNDC>0409-3182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20050623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089646</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-3183-01</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (0409-3183-01) / 20 mL in 1 VIAL, SINGLE-DOSE (0409-3183-11) </PackageDescription>
<NDC11Code>00409-3183-01</NDC11Code>
<ProductNDC>0409-3183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089651</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 5</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-1105-02</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-1105-02) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1105-22) </PackageDescription>
<NDC11Code>00409-1105-02</NDC11Code>
<ProductNDC>0409-1105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090761</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated.</Description>
</NDC>
<NDC>
<NDCCode>0409-1109-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1109-01) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1109-11) </PackageDescription>
<NDC11Code>00409-1109-01</NDC11Code>
<ProductNDC>0409-1109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090782</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2°C to 8°C (36°F to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if rerefrigerated.</Description>
</NDC>
<NDC>
<NDCCode>0409-1140-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-1140-01) > 2.5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-1140-01</NDC11Code>
<ProductNDC>0409-1140</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Argatroban</ProprietaryName>
<NonProprietaryName>Argatroban</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204120</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ARGATROBAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin induced thrombocytopenia (HIT). (1.1), 2 As an anticoagulant in adults patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI). (1.2).</IndicationAndUsage>
<Description>Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino] 1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5SH2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-dose amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>0409-1176-30</NDCCode>
<PackageDescription>10 CARTRIDGE in 1 CARTON (0409-1176-30) / 1 mL in 1 CARTRIDGE (0409-1176-03) </PackageDescription>
<NDC11Code>00409-1176-30</NDC11Code>
<ProductNDC>0409-1176</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20050825</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1178-30</NDCCode>
<PackageDescription>10 CARTRIDGE in 1 CARTON (0409-1178-30) / 1 mL in 1 CARTRIDGE (0409-1178-03) </PackageDescription>
<NDC11Code>00409-1178-30</NDC11Code>
<ProductNDC>0409-1178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20050913</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1179-30</NDCCode>
<PackageDescription>10 CARTRIDGE in 1 CARTON (0409-1179-30) / 1 mL in 1 CARTRIDGE (0409-1179-03) </PackageDescription>
<NDC11Code>00409-1179-30</NDC11Code>
<ProductNDC>0409-1179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20051012</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1180-69</NDCCode>
<PackageDescription>10 CARTRIDGE in 1 CARTON (0409-1180-69) / 1 mL in 1 CARTRIDGE (0409-1180-59) </PackageDescription>
<NDC11Code>00409-1180-69</NDC11Code>
<ProductNDC>0409-1180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20050915</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-11-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1181-30</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0409-1181-30) / 30 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00409-1181-30</NDC11Code>
<ProductNDC>0409-1181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20060224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1362-01</NDCCode>
<PackageDescription>10 SYRINGE in 1 CELLO PACK (0409-1362-01) / 1 mL in 1 SYRINGE (0409-1362-11) </PackageDescription>
<NDC11Code>00409-1362-01</NDC11Code>
<ProductNDC>0409-1362</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210416</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-11-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1418-01</NDCCode>
<PackageDescription>10 SYRINGE in 1 CELLO PACK (0409-1418-01) / 1 mL in 1 SYRINGE (0409-1418-11) </PackageDescription>
<NDC11Code>00409-1418-01</NDC11Code>
<ProductNDC>0409-1418</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demerol</ProprietaryName>
<NonProprietaryName>Meperidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210416</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021171</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MEPERIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-11-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEMEROL Injection is indicated for preoperative medication, support of anesthesia, and obstetrical analgesia. DEMEROL Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>DEMEROL (meperidine hydrochloride injection) is an opioid agonist available as a sterile aqueous solution, for intramuscular, intravenous, or subcutaneous administration. It contains meperidine hydrochloride as the active pharmaceutical ingredient. Meperidine hydrochloride chemical name is 4‑Piperidinecarboxylic acid, 1‑methyl-4-phenyl-,ethyl ester, hydrochloride. The molecular weight is 283.79 g/mol. Its molecular formula is C15H21NO2·HCl, and it has the following chemical structure. Meperidine hydrochloride is a white crystalline substance with a melting point of 186° C to 189° C, and it is readily soluble in water. DEMEROL (meperidine hydrochloride injection) is available as. Single-dose CarpujectTM cartridge with Luer Lock for the Carpuject Syringe System: 25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL. Each mL of Single-dose cartridge contains 25 mg, 50 mg, 75 mg or 100 mg of meperidine hydrochloride USP (equivalent to 21.79 mg, 43.58 mg, 65.36 mg or 87.15 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. Multiple-dose vials: 1,500 mg/30 mL (50 mg/mL) strength. Each mL of vial contains 50 mg of meperidine hydrochloride USP (equivalent to 43.58 mg of meperidine), 1 mg of meta-cresol USP, as a preservative, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Single-dose NexJect Prefilled Syringe with Luer Lock: 25 mg/mL and 50 mg/mL strengths. Each mL contains 25 mg or 50 mg of meperidine hydrochloride USP (equivalent to 21.79 mg or 43.58 mg of meperidine), respectively, and sodium hydroxide NF, and hydrochloric acid NF as pH adjusters, in water for injection. Only the 25 mg strength contains 3.8 mg of sodium chloride USP as isotonicity agent. The pH of DEMEROL (meperidine hydrochloride injection) solutions is between 3.5 and 6.0. DEMEROL (meperidine hydrochloride injection) 5 percent solution has a specific gravity of 1.0086 at 20°C, and the 10 percent solution has a specific gravity of 1.0165 at 20°C.</Description>
</NDC>
<NDC>
<NDCCode>0409-1886-02</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0409-1886-02) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1886-22) </PackageDescription>
<NDC11Code>00409-1886-02</NDC11Code>
<ProductNDC>0409-1886</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20121102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202869</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older. (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy. (1.2)oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy. (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible. (1.4).</IndicationAndUsage>
<Description>Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0409-1886-05</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0409-1886-05) / 5 mL in 1 VIAL, SINGLE-DOSE (0409-1886-15) </PackageDescription>
<NDC11Code>00409-1886-05</NDC11Code>
<ProductNDC>0409-1886</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202869</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older. (1.1) . Levetiracetam injection is indicated for adjunctive therapy for the treatment of:oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy. (1.2)oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy. (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible. (1.4) .</IndicationAndUsage>
<Description>Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)].</Description>
</NDC>
</NDCList>