{
"NDC": [
{
"NDCCode": "0409-1596-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (0409-1596-01) / 100 mL in 1 BOTTLE",
"NDC11Code": "00409-1596-01",
"ProductNDC": "0409-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Precedex",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231113",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021038",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20231113",
"SamplePackage": "N",
"IndicationAndUsage": "PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (Error! Hyperlink reference not valid.).",
"Description": "PRECEDEX (dexmedetomidine hydrochloride) injection (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. PRECEDEX Injection is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "0409-1596-10",
"PackageDescription": "10 CARTON in 1 CASE (0409-1596-10) / 1 BOTTLE in 1 CARTON (0409-1596-01) / 100 mL in 1 BOTTLE",
"NDC11Code": "00409-1596-10",
"ProductNDC": "0409-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Precedex",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231113",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021038",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231113",
"SamplePackage": "N",
"IndicationAndUsage": "PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).",
"Description": "PRECEDEX (dexmedetomidine hydrochloride) injection (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. PRECEDEX Injection is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "0024-1596-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (0024-1596-01) ",
"NDC11Code": "00024-1596-01",
"ProductNDC": "0024-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primaquine Phosphate",
"NonProprietaryName": "Primaquine Phosphate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110415",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA008316",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "PRIMAQUINE PHOSPHATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110415",
"SamplePackage": "N",
"IndicationAndUsage": "Primaquine phosphate Tablets are indicated for the radical cure (prevention of relapse) of vivax malaria.",
"Description": "Primaquine phosphate is 8-[(4-amino-1-methylbutyl) amino]-6-methoxyquinoline phosphate, a synthetic compound with potent antimalarial activity. The molecular formula of Primaquine phosphate is C15H21N3O∙2H3PO4 and its molecular weight is 455.34. The structural formula of Primaquine phosphate is. Figure 1: Primaquine phosphate structure. Each Primaquine phosphate tablet contains 26.3 mg of primaquine phosphate (equivalent to 15 mg of primaquine base). The dosage is customarily expressed in terms of the base. Inactive Ingredients: Carnauba Wax, Hydroxypropyl Methylcellulose, Lactose, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol 400, Polysorbate 80, Pregelatinized Starch, Red Ferric Oxide, Talc, Titanium Dioxide."
},
{
"NDCCode": "36987-1596-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1596-1)",
"NDC11Code": "36987-1596-01",
"ProductNDC": "36987-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mango",
"NonProprietaryName": "Mango",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "MANGO",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1596-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-1596-1) ",
"NDC11Code": "37662-1596-01",
"ProductNDC": "37662-1596",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Senega Officinalis",
"NonProprietaryName": "Senega Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220925",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "POLYGALA SENEGA ROOT",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220925",
"SamplePackage": "N"
},
{
"NDCCode": "43742-1596-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1596-1) ",
"NDC11Code": "43742-1596-01",
"ProductNDC": "43742-1596",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Amoeba",
"NonProprietaryName": "Baptisia Tinctoria, Cajuputum, Capsicum Annuum, Fragaria Vesca, Hamamelis Virginiana, Quassia (amara), Senna (cassia Angustifolia), Hydrastis Canadensis, Hepar Suis, Pancreas Suis, Spleen (suis), Cinchona Officinalis, Iridium Metallicum, Lycopodium Clavatum, Nitricum Acidum, Nux Vomica, Selenium Metallicum, Blastocystis Hominis, Cryptosporidium Parvum, Giardia Lamblia, Entamoeba Histolytica, Brugia Malayi",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20191029",
"EndMarketingDate": "20250820",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "ALPINE STRAWBERRY; BAPTISIA TINCTORIA ROOT; BLASTOCYSTIS HOMINIS; BRUGIA MALAYI; CAJUPUT OIL; CAPSICUM; CINCHONA OFFICINALIS BARK; CRYPTOSPORIDIUM PARVUM; ENTAMOEBA HISTOLYTICA; GIARDIA LAMBLIA; GOLDENSEAL; HAMAMELIS VIRGINIANA ROOT BARK/STEM BARK; IRIDIUM; LYCOPODIUM CLAVATUM SPORE; NITRIC ACID; PORK LIVER; QUASSIA AMARA WOOD; SELENIUM; SENNA LEAF; STRYCHNOS NUX-VOMICA SEED; SUS SCROFA PANCREAS; SUS SCROFA SPLEEN",
"StrengthNumber": "3; 3; 12; 39; 3; 3; 12; 12; 18; 12; 6; 3; 12; 12; 12; 8; 3; 12; 3; 12; 8; 8",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191029",
"EndMarketingDatePackage": "20250820",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of symptoms related to amoeba infestation including consequent weakness, fever, and stomach cramps.**. **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "50090-1596-1",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (50090-1596-1) ",
"NDC11Code": "50090-1596-01",
"ProductNDC": "50090-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-05-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250113",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat: Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcus species. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcus spp., or Haemophilus influenzae.",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45.Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "63629-1596-1",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-1596-1) ",
"NDC11Code": "63629-1596-01",
"ProductNDC": "63629-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plendil",
"NonProprietaryName": "Felodipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19910916",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019834",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FELODIPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "19910916",
"SamplePackage": "N"
},
{
"NDCCode": "64942-1596-1",
"PackageDescription": "76 g in 1 CONTAINER (64942-1596-1) ",
"NDC11Code": "64942-1596-01",
"ProductNDC": "64942-1596",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Axe",
"NonProprietaryName": "Phoenix Antiperspirant And Deodorant",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a/ Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "18.2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": " reduces underarm wetness. 48 Hour Protection.",
"Description": "Axe Phoenix 48H Dry Antiperspirant and Deodorant."
},
{
"NDCCode": "69189-1596-1",
"PackageDescription": "1 TABLET, FILM COATED in 1 DOSE PACK (69189-1596-1)",
"NDC11Code": "69189-1596-01",
"ProductNDC": "69189-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primaquine Phosphate",
"NonProprietaryName": "Primaquine Phosphate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150824",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA008316",
"LabelerName": "Avera McKennan Hospital",
"SubstanceName": "PRIMAQUINE PHOSPHATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-06",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "70518-1596-1",
"PackageDescription": "180 TABLET in 1 BOTTLE, PLASTIC (70518-1596-1) ",
"NDC11Code": "70518-1596-01",
"ProductNDC": "70518-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085223",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190610",
"SamplePackage": "N"
},
{
"NDCCode": "70771-1596-1",
"PackageDescription": "100 TABLET in 1 BOTTLE (70771-1596-1) ",
"NDC11Code": "70771-1596-01",
"ProductNDC": "70771-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midodrine Hydrochloride",
"NonProprietaryName": "Midodrine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213055",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "MIDODRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200917",
"SamplePackage": "N",
"IndicationAndUsage": "Midodrine hydrochloride tablets are indicated for the treatment of symptomatic orthostatic hypotension (OH). Because midodrine hydrochloride tablets can cause marked elevation of supine blood pressure (BP > 200 mmHg systolic), it should be used in patients whose lives are considerably impaired despite standard clinical care, including non-pharmacologic treatment (such as support stockings), fluid expansion, and lifestyle alterations. The indication is based on midodrine hydrochloride tablets's effect on increases in 1-minute standing systolic blood pressure, a surrogate marker considered likely to correspond to a clinical benefit. At present, however, clinical benefits of midodrine hydrochloride tablets, principally improved ability to perform life activities, have not been established. Further clinical trials are underway to verify and describe the clinical benefits of midodrine hydrochloride tablets. After initiation of treatment, midodrine hydrochloride tablets should be continued only for patients who report significant symptomatic improvement.",
"Description": "Name: Midodrine hydrochloride tablets, USP. Dosage Form: 2.5 mg, 5 mg and 10 mg tablets for oral administration. Active Ingredient: Midodrine hydrochloride USP, 2.5 mg, 5 mg and 10 mg. Inactive Ingredients: Colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and pregelatinized starch. Pharmacological Classification: Vasopressor/Antihypotensive. Chemical Names (USAN: Midodrine Hydrochloride): (1) Acetamide, 2-amino-N-[2-(2,5-dimethoxyphenyl)-2-hydroxyethyl]-monohydrochloride, (±)-;. (2) (±)-2-amino-N-(ß-hydroxy-2,5-dimethoxyphenethyl)acetamide monohydrochloride. BAN, INN, JAN: Midodrine. Structural formula. Molecular formula: C12H18N2O4 HCl; Molecular Weight: 290.7. Organoleptic Properties: Odorless, white, crystalline powder. Solubility: Water: Soluble. Methanol: Sparingly soluble. pKa: 7.8 pH: 4 to 5 (5% aqueous solution). Melting Range: About 200°C."
},
{
"NDCCode": "71335-1596-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (71335-1596-1) ",
"NDC11Code": "71335-1596-01",
"ProductNDC": "71335-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220214",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "51662-1596-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1596-3) / 1 AMPULE in 1 POUCH (51662-1596-2) / 5 mL in 1 AMPULE",
"NDC11Code": "51662-1596-03",
"ProductNDC": "51662-1596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hcl",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "RETROBULBAR; TOPICAL; TRANSTRACHEAL",
"StartMarketingDate": "20220915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088295",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-01-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220915",
"SamplePackage": "N",
"IndicationAndUsage": "4% Lidocaine Hydrochloride Injection, USP is indicated for the production of topical anesthesia of the mucous membranes of the respiratory tract or the genito-urinary tract. It may be injected trans-tracheally to anesthetize the larynx and trachea, and it may be administered by retrobulbar injection to provide anesthesia for ophthalmic surgery.",
"Description": "4% Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing lidocaine hydrochloride, anhydrous 40 mg/mL in water for injection. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH 6.5 (5.0 to 7.0). Lidocaine has cardiac antiarrhythmic properties and is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-2′,6′-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula."
},
{
"NDCCode": "0409-0001-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) ",
"NDC11Code": "00409-0001-25",
"ProductNDC": "0409-0001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20250127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250127",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-0007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) ",
"NDC11Code": "00409-0007-10",
"ProductNDC": "0409-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-0016-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00409-0016-01",
"ProductNDC": "0409-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022234",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220110",
"SamplePackage": "N",
"Description": "Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "0409-0024-10",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) ",
"NDC11Code": "00409-0024-10",
"ProductNDC": "0409-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018801",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume."
},
{
"NDCCode": "0409-0025-10",
"PackageDescription": "12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) ",
"NDC11Code": "00409-0025-10",
"ProductNDC": "0409-0025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dobutamine In Dextrose",
"NonProprietaryName": "Dobutamine In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260316",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020201",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOBUTAMINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260316",
"SamplePackage": "N",
"IndicationAndUsage": "Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.",
"Description": "Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0409-0032-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) ",
"NDC11Code": "00409-0032-01",
"ProductNDC": "0409-0032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217459",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250929",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "0409-0042-12",
"PackageDescription": "12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) ",
"NDC11Code": "00409-0042-12",
"ProductNDC": "0409-0042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopamine Hydrochloride In Dextrose",
"NonProprietaryName": "Dopamine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018826",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOPAMINE HYDROCHLORIDE",
"StrengthNumber": "1.6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251103",
"SamplePackage": "N",
"IndicationAndUsage": "Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.",
"Description": "Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "0409-0106-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0106-01",
"ProductNDC": "0409-0106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC],Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170104",
"SamplePackage": "N"
},
{
"NDCCode": "0409-0120-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0120-01",
"ProductNDC": "0409-0120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210282",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "350",
"StrengthUnit": "mg/7mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210802",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown."
},
{
"NDCCode": "0409-0122-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0122-01) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0122-01",
"ProductNDC": "0409-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210282",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210802",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown."
},
{
"NDCCode": "0409-0124-01",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (0409-0124-01) > 25 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "00409-0124-01",
"ProductNDC": "0409-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20160418",
"EndMarketingDate": "20171231",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [Chemical/Ingredient],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0409-0125-25",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (0409-0125-25) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0125-01) ",
"NDC11Code": "00409-0125-25",
"ProductNDC": "0409-0125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075240",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230807",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl injection is indicated for control of blood pressure in severe hypertension.",
"Description": "Labetalol hydrochloride is an adrenergic receptor blocking agent that has both selective alpha1- and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol HCl is a racemate, chemically designated as 5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl]-salicylamide monohydrochloride, and has the following structural formula. Labetalol hydrochloride has the molecular formula C19H24N2O3 HCl and a molecular weight of 364.87. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride injection is a clear, colorless to light yellow aqueous sterile isotonic solution for intravenous injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride, USP, 45 mg anhydrous dextrose, 0.1 mg edetate disodium; 0.8 mg methylparaben and 0.1 mg propylparaben as preservatives; citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range."
},
{
"NDCCode": "0409-0147-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0147-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0147-01) ",
"NDC11Code": "00409-0147-10",
"ProductNDC": "0409-0147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089646",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "20; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-0151-10",
"PackageDescription": "12 POUCH in 1 CASE (0409-0151-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0151-01) ",
"NDC11Code": "00409-0151-10",
"ProductNDC": "0409-0151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dobutamine In Dextrose",
"NonProprietaryName": "Dobutamine In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260316",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020201",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOBUTAMINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260316",
"SamplePackage": "N",
"IndicationAndUsage": "Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.",
"Description": "Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0409-0152-24",
"PackageDescription": "24 POUCH in 1 CARTON (0409-0152-24) / 1 BAG in 1 POUCH (0409-0152-01) / 100 mL in 1 BAG",
"NDC11Code": "00409-0152-24",
"ProductNDC": "0409-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206191",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211213",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Metronidazole Injection and other antibacterial drugs, Metronidazole Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Metronidazole Injection, USP is a sterile, parenteral dosage form of metronidazole in water. Each 100 mL of Metronidazole Injection, USP contains a sterile, nonpyrogenic, isotonic, buffered solution of Metronidazole, USP 500 mg, Sodium Chloride, USP 740 mg, Dibasic Sodium Phosphate Dihydrate, USP 75 mg and Citric Acid Anhydrous, USP 40 mg in Water for Injection, USP. Metronidazole Injection, USP has a calculated osmolality from 270 to 310 mOsmol/kg and a pH from 4.5 to 6.0. Sodium content: 13.5 mEq/container. Metronidazole is classified as a nitroimidazole antimicrobial and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3):. Not made with natural rubber latex. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0409-0155-02",
"PackageDescription": "10 BOTTLE in 1 TRAY (0409-0155-02) / 100 mL in 1 BOTTLE (0409-0155-01) ",
"NDC11Code": "00409-0155-02",
"ProductNDC": "0409-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Precedex",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021038",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230103",
"SamplePackage": "N",
"IndicationAndUsage": "PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).",
"Description": "PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0409-1596-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0409-1596-01) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00409-1596-01</NDC11Code>
<ProductNDC>0409-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Precedex</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231113</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021038</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (Error! Hyperlink reference not valid.).</IndicationAndUsage>
<Description>PRECEDEX (dexmedetomidine hydrochloride) injection (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. PRECEDEX Injection is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>0409-1596-10</NDCCode>
<PackageDescription>10 CARTON in 1 CASE (0409-1596-10) / 1 BOTTLE in 1 CARTON (0409-1596-01) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00409-1596-10</NDC11Code>
<ProductNDC>0409-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Precedex</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231113</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021038</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).</IndicationAndUsage>
<Description>PRECEDEX (dexmedetomidine hydrochloride) injection (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. PRECEDEX Injection is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>0024-1596-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0024-1596-01) </PackageDescription>
<NDC11Code>00024-1596-01</NDC11Code>
<ProductNDC>0024-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primaquine Phosphate</ProprietaryName>
<NonProprietaryName>Primaquine Phosphate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110415</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA008316</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>PRIMAQUINE PHOSPHATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primaquine phosphate Tablets are indicated for the radical cure (prevention of relapse) of vivax malaria.</IndicationAndUsage>
<Description>Primaquine phosphate is 8-[(4-amino-1-methylbutyl) amino]-6-methoxyquinoline phosphate, a synthetic compound with potent antimalarial activity. The molecular formula of Primaquine phosphate is C15H21N3O∙2H3PO4 and its molecular weight is 455.34. The structural formula of Primaquine phosphate is. Figure 1: Primaquine phosphate structure. Each Primaquine phosphate tablet contains 26.3 mg of primaquine phosphate (equivalent to 15 mg of primaquine base). The dosage is customarily expressed in terms of the base. Inactive Ingredients: Carnauba Wax, Hydroxypropyl Methylcellulose, Lactose, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol 400, Polysorbate 80, Pregelatinized Starch, Red Ferric Oxide, Talc, Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>36987-1596-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1596-1)</PackageDescription>
<NDC11Code>36987-1596-01</NDC11Code>
<ProductNDC>36987-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mango</ProprietaryName>
<NonProprietaryName>Mango</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>MANGO</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1596-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-1596-1) </PackageDescription>
<NDC11Code>37662-1596-01</NDC11Code>
<ProductNDC>37662-1596</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Senega Officinalis</ProprietaryName>
<NonProprietaryName>Senega Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220925</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>POLYGALA SENEGA ROOT</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43742-1596-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1596-1) </PackageDescription>
<NDC11Code>43742-1596-01</NDC11Code>
<ProductNDC>43742-1596</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Amoeba</ProprietaryName>
<NonProprietaryName>Baptisia Tinctoria, Cajuputum, Capsicum Annuum, Fragaria Vesca, Hamamelis Virginiana, Quassia (amara), Senna (cassia Angustifolia), Hydrastis Canadensis, Hepar Suis, Pancreas Suis, Spleen (suis), Cinchona Officinalis, Iridium Metallicum, Lycopodium Clavatum, Nitricum Acidum, Nux Vomica, Selenium Metallicum, Blastocystis Hominis, Cryptosporidium Parvum, Giardia Lamblia, Entamoeba Histolytica, Brugia Malayi</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191029</StartMarketingDate>
<EndMarketingDate>20250820</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>ALPINE STRAWBERRY; BAPTISIA TINCTORIA ROOT; BLASTOCYSTIS HOMINIS; BRUGIA MALAYI; CAJUPUT OIL; CAPSICUM; CINCHONA OFFICINALIS BARK; CRYPTOSPORIDIUM PARVUM; ENTAMOEBA HISTOLYTICA; GIARDIA LAMBLIA; GOLDENSEAL; HAMAMELIS VIRGINIANA ROOT BARK/STEM BARK; IRIDIUM; LYCOPODIUM CLAVATUM SPORE; NITRIC ACID; PORK LIVER; QUASSIA AMARA WOOD; SELENIUM; SENNA LEAF; STRYCHNOS NUX-VOMICA SEED; SUS SCROFA PANCREAS; SUS SCROFA SPLEEN</SubstanceName>
<StrengthNumber>3; 3; 12; 39; 3; 3; 12; 12; 18; 12; 6; 3; 12; 12; 12; 8; 3; 12; 3; 12; 8; 8</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191029</StartMarketingDatePackage>
<EndMarketingDatePackage>20250820</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of symptoms related to amoeba infestation including consequent weakness, fever, and stomach cramps.**. **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-1596-1</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (50090-1596-1) </PackageDescription>
<NDC11Code>50090-1596-01</NDC11Code>
<ProductNDC>50090-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat: Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcus species. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcus spp., or Haemophilus influenzae.</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45.Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63629-1596-1</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-1596-1) </PackageDescription>
<NDC11Code>63629-1596-01</NDC11Code>
<ProductNDC>63629-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plendil</ProprietaryName>
<NonProprietaryName>Felodipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19910916</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019834</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FELODIPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64942-1596-1</NDCCode>
<PackageDescription>76 g in 1 CONTAINER (64942-1596-1) </PackageDescription>
<NDC11Code>64942-1596-01</NDC11Code>
<ProductNDC>64942-1596</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Axe</ProprietaryName>
<NonProprietaryName>Phoenix Antiperspirant And Deodorant</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a/ Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18.2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> reduces underarm wetness. 48 Hour Protection.</IndicationAndUsage>
<Description>Axe Phoenix 48H Dry Antiperspirant and Deodorant.</Description>
</NDC>
<NDC>
<NDCCode>69189-1596-1</NDCCode>
<PackageDescription>1 TABLET, FILM COATED in 1 DOSE PACK (69189-1596-1)</PackageDescription>
<NDC11Code>69189-1596-01</NDC11Code>
<ProductNDC>69189-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primaquine Phosphate</ProprietaryName>
<NonProprietaryName>Primaquine Phosphate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150824</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA008316</ApplicationNumber>
<LabelerName>Avera McKennan Hospital</LabelerName>
<SubstanceName>PRIMAQUINE PHOSPHATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-06</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70518-1596-1</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE, PLASTIC (70518-1596-1) </PackageDescription>
<NDC11Code>70518-1596-01</NDC11Code>
<ProductNDC>70518-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085223</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70771-1596-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (70771-1596-1) </PackageDescription>
<NDC11Code>70771-1596-01</NDC11Code>
<ProductNDC>70771-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midodrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Midodrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213055</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>MIDODRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midodrine hydrochloride tablets are indicated for the treatment of symptomatic orthostatic hypotension (OH). Because midodrine hydrochloride tablets can cause marked elevation of supine blood pressure (BP > 200 mmHg systolic), it should be used in patients whose lives are considerably impaired despite standard clinical care, including non-pharmacologic treatment (such as support stockings), fluid expansion, and lifestyle alterations. The indication is based on midodrine hydrochloride tablets's effect on increases in 1-minute standing systolic blood pressure, a surrogate marker considered likely to correspond to a clinical benefit. At present, however, clinical benefits of midodrine hydrochloride tablets, principally improved ability to perform life activities, have not been established. Further clinical trials are underway to verify and describe the clinical benefits of midodrine hydrochloride tablets. After initiation of treatment, midodrine hydrochloride tablets should be continued only for patients who report significant symptomatic improvement.</IndicationAndUsage>
<Description>Name: Midodrine hydrochloride tablets, USP. Dosage Form: 2.5 mg, 5 mg and 10 mg tablets for oral administration. Active Ingredient: Midodrine hydrochloride USP, 2.5 mg, 5 mg and 10 mg. Inactive Ingredients: Colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and pregelatinized starch. Pharmacological Classification: Vasopressor/Antihypotensive. Chemical Names (USAN: Midodrine Hydrochloride): (1) Acetamide, 2-amino-N-[2-(2,5-dimethoxyphenyl)-2-hydroxyethyl]-monohydrochloride, (±)-;. (2) (±)-2-amino-N-(ß-hydroxy-2,5-dimethoxyphenethyl)acetamide monohydrochloride. BAN, INN, JAN: Midodrine. Structural formula. Molecular formula: C12H18N2O4 HCl; Molecular Weight: 290.7. Organoleptic Properties: Odorless, white, crystalline powder. Solubility: Water: Soluble. Methanol: Sparingly soluble. pKa: 7.8 pH: 4 to 5 (5% aqueous solution). Melting Range: About 200°C.</Description>
</NDC>
<NDC>
<NDCCode>71335-1596-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (71335-1596-1) </PackageDescription>
<NDC11Code>71335-1596-01</NDC11Code>
<ProductNDC>71335-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>51662-1596-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1596-3) / 1 AMPULE in 1 POUCH (51662-1596-2) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>51662-1596-03</NDC11Code>
<ProductNDC>51662-1596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hcl</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>RETROBULBAR; TOPICAL; TRANSTRACHEAL</RouteName>
<StartMarketingDate>20220915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088295</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>4% Lidocaine Hydrochloride Injection, USP is indicated for the production of topical anesthesia of the mucous membranes of the respiratory tract or the genito-urinary tract. It may be injected trans-tracheally to anesthetize the larynx and trachea, and it may be administered by retrobulbar injection to provide anesthesia for ophthalmic surgery.</IndicationAndUsage>
<Description>4% Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing lidocaine hydrochloride, anhydrous 40 mg/mL in water for injection. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH 6.5 (5.0 to 7.0). Lidocaine has cardiac antiarrhythmic properties and is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-2′,6′-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0001-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) </PackageDescription>
<NDC11Code>00409-0001-25</NDC11Code>
<ProductNDC>0409-0001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20250127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-0007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) </PackageDescription>
<NDC11Code>00409-0007-10</NDC11Code>
<ProductNDC>0409-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0016-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00409-0016-01</NDC11Code>
<ProductNDC>0409-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220110</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022234</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>0409-0024-10</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) </PackageDescription>
<NDC11Code>00409-0024-10</NDC11Code>
<ProductNDC>0409-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250331</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018801</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume.</Description>
</NDC>
<NDC>
<NDCCode>0409-0025-10</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) </PackageDescription>
<NDC11Code>00409-0025-10</NDC11Code>
<ProductNDC>0409-0025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dobutamine In Dextrose</ProprietaryName>
<NonProprietaryName>Dobutamine In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260316</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020201</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOBUTAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.</IndicationAndUsage>
<Description>Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0409-0032-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) </PackageDescription>
<NDC11Code>00409-0032-01</NDC11Code>
<ProductNDC>0409-0032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217459</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>0409-0042-12</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) </PackageDescription>
<NDC11Code>00409-0042-12</NDC11Code>
<ProductNDC>0409-0042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopamine Hydrochloride In Dextrose</ProprietaryName>
<NonProprietaryName>Dopamine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018826</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOPAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.</IndicationAndUsage>
<Description>Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>0409-0106-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0106-01</NDC11Code>
<ProductNDC>0409-0106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC],Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-0120-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0120-01</NDC11Code>
<ProductNDC>0409-0120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210282</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/7mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>0409-0122-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0122-01) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0122-01</NDC11Code>
<ProductNDC>0409-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210282</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>0409-0124-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (0409-0124-01) > 25 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>00409-0124-01</NDC11Code>
<ProductNDC>0409-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20160418</StartMarketingDate>
<EndMarketingDate>20171231</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [Chemical/Ingredient],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0409-0125-25</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0409-0125-25) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0125-01) </PackageDescription>
<NDC11Code>00409-0125-25</NDC11Code>
<ProductNDC>0409-0125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075240</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl injection is indicated for control of blood pressure in severe hypertension.</IndicationAndUsage>
<Description>Labetalol hydrochloride is an adrenergic receptor blocking agent that has both selective alpha1- and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol HCl is a racemate, chemically designated as 5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl]-salicylamide monohydrochloride, and has the following structural formula. Labetalol hydrochloride has the molecular formula C19H24N2O3 HCl and a molecular weight of 364.87. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride injection is a clear, colorless to light yellow aqueous sterile isotonic solution for intravenous injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride, USP, 45 mg anhydrous dextrose, 0.1 mg edetate disodium; 0.8 mg methylparaben and 0.1 mg propylparaben as preservatives; citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range.</Description>
</NDC>
<NDC>
<NDCCode>0409-0147-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0147-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0147-01) </PackageDescription>
<NDC11Code>00409-0147-10</NDC11Code>
<ProductNDC>0409-0147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089646</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>20; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0151-10</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0151-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0151-01) </PackageDescription>
<NDC11Code>00409-0151-10</NDC11Code>
<ProductNDC>0409-0151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dobutamine In Dextrose</ProprietaryName>
<NonProprietaryName>Dobutamine In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260316</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020201</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOBUTAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.</IndicationAndUsage>
<Description>Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0409-0152-24</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (0409-0152-24) / 1 BAG in 1 POUCH (0409-0152-01) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-0152-24</NDC11Code>
<ProductNDC>0409-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206191</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Metronidazole Injection and other antibacterial drugs, Metronidazole Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Metronidazole Injection, USP is a sterile, parenteral dosage form of metronidazole in water. Each 100 mL of Metronidazole Injection, USP contains a sterile, nonpyrogenic, isotonic, buffered solution of Metronidazole, USP 500 mg, Sodium Chloride, USP 740 mg, Dibasic Sodium Phosphate Dihydrate, USP 75 mg and Citric Acid Anhydrous, USP 40 mg in Water for Injection, USP. Metronidazole Injection, USP has a calculated osmolality from 270 to 310 mOsmol/kg and a pH from 4.5 to 6.0. Sodium content: 13.5 mEq/container. Metronidazole is classified as a nitroimidazole antimicrobial and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3):. Not made with natural rubber latex. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-0155-02</NDCCode>
<PackageDescription>10 BOTTLE in 1 TRAY (0409-0155-02) / 100 mL in 1 BOTTLE (0409-0155-01) </PackageDescription>
<NDC11Code>00409-0155-02</NDC11Code>
<ProductNDC>0409-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Precedex</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021038</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRECEDEX is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer PRECEDEX by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2), 3 Sedation of non-intubated pediatric patients aged 1 month to less than 18 years prior to and during non-invasive procedures. (1.2).</IndicationAndUsage>
<Description>PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
</NDCList>