{
"NDC": [
{
"NDCCode": "0409-2308-01",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-01) / 1 mL in 1 VIAL, SINGLE-DOSE (0409-2308-21) ",
"NDC11Code": "00409-2308-01",
"ProductNDC": "0409-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20050614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050614",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-2308-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-02) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-2308-22) ",
"NDC11Code": "00409-2308-02",
"ProductNDC": "0409-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20050614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051004",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-2308-49",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-49) / 1 mL in 1 VIAL, SINGLE-DOSE (0409-2308-69) ",
"NDC11Code": "00409-2308-49",
"ProductNDC": "0409-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20051121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051228",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-2308-50",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-50) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-2308-70) ",
"NDC11Code": "00409-2308-50",
"ProductNDC": "0409-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20051121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051121",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "15631-2308-1",
"PackageDescription": "1 CONTAINER in 1 CONTAINER (15631-2308-1) > 100 g in 1 CONTAINER",
"NDC11Code": "15631-2308-01",
"ProductNDC": "15631-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Berberis Aquarius",
"NonProprietaryName": "Berberis Aquarius",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "MAHONIA AQUIFOLIUM ROOT BARK",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "36987-2308-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2308-1)",
"NDC11Code": "36987-2308-01",
"ProductNDC": "36987-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Corn Grass",
"NonProprietaryName": "Corn Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "ZEA MAYS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Cell-mediated Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2308-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-2308-1) ",
"NDC11Code": "37662-2308-01",
"ProductNDC": "37662-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thiosinaminum",
"NonProprietaryName": "Thiosinaminum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALLYLTHIOUREA",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N"
},
{
"NDCCode": "43742-2308-1",
"PackageDescription": "960 mL in 1 CONTAINER (43742-2308-1) ",
"NDC11Code": "43742-2308-01",
"ProductNDC": "43742-2308",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aacg-a, Aacg-b, Adenosinum Cyclophosphoricum, Berberinum, Calcarea Carbonica, Cinchona Officinalis, Cholinum, Colibacillinum Cum Natrum Muriaticum, Curcuma Longa, Methylcobalamin, Dna, Ferrum Metallicum, Panax Ginseng, L-glutamic Acid, Hepar Suis, Hypothalamus Suis, Indolum, Insulinum, Iodium, Lycopodium Clavatum, Magnesia Carbonica, L-methionine, Pancreas Suis, Stomach (suis), Zincum Metallicum, 7-oxo-dehydroepiandrosterone-3b-acetate",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20260406",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Deseret Biologicals,Inc.",
"SubstanceName": "7-KETO-DEHYDROEPIANDROSTERONE; ADENOSINE CYCLIC PHOSPHATE; APC-356433; APC-356434; ASIAN GINSENG; BERBERINE CHLORIDE; CHOLINE HYDROXIDE; CINCHONA OFFICINALIS BARK; ESCHERICHIA COLI; GLUTAMIC ACID; HERRING SPERM DNA; INDOLE; INSULIN HUMAN; IODINE; IRON; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM CARBONATE; METHIONINE; METHYLCOBALAMIN; OYSTER SHELL CALCIUM CARBONATE, CRUDE; PORK LIVER; SUS SCROFA HYPOTHALAMUS; SUS SCROFA PANCREAS; SUS SCROFA STOMACH; TURMERIC; ZINC",
"StrengthNumber": "60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Unfinished",
"LastUpdate": "2026-04-07",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "06-APR-26"
},
{
"NDCCode": "50090-2308-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-2308-1) ",
"NDC11Code": "50090-2308-01",
"ProductNDC": "50090-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079029",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inhibitors [MoA],Cytochrome P450 2D6 Inhibitors [MoA],Antiarrhythmic [EPC],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Cytochrome P450 1A2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160215",
"SamplePackage": "N"
},
{
"NDCCode": "55714-2308-1",
"PackageDescription": "30 mL in 1 BOTTLE, GLASS (55714-2308-1)",
"NDC11Code": "55714-2308-01",
"ProductNDC": "55714-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pollen Weeds",
"NonProprietaryName": "Xerophyllum Asphodeloides, Adrenalinum, Alfalfa, Aletris Farinosa, Artemisia Vulgaris, Bellis Perennis, Dysphania Ambrosioides, Lycopus Virginicus, Phytolacca American Root, Populus Tremuloides, Ptelea Trifoliata, Sambusus Nigra, Trillium Erectum Root, Elymus Repens Root, Urtica Urens, Wyethia Helenioides, Yucca Filamentosa, Avena Sativa Pollen, Cynosurus Cristatus Pollen. Echinochloa Crus-galli Pollen, Poa Pratensis Pollen, Anthoxanthum Odoratum Pollen, Agrostis Gigantea Pollen, Bromus Secalinus Pollen",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "XEROPHYLLUM ASPHODELOIDES; EPINEPHRINE; ALFALFA; ALETRIS FARINOSA ROOT; ARTEMISIA VULGARIS ROOT; BELLIS PERENNIS; DYSPHANIA AMBROSIOIDES; LYCOPUS VIRGINICUS; PHYTOLACCA AMERICANA ROOT; POPULUS TREMULOIDES LEAF; POPULUS TREMULOIDES BARK; PTELEA TRIFOLIATA BARK; SAMBUCUS NIGRA FLOWERING TOP; TRILLIUM ERECTUM ROOT; ELYMUS REPENS ROOT; URTICA URENS; WYETHIA HELENIOIDES ROOT; YUCCA FILAMENTOSA; AVENA SATIVA POLLEN; CYNOSURUS CRISTATUS POLLEN; ECHINOCHLOA CRUS-GALLI POLLEN; POA PRATENSIS POLLEN; AGROSTIS GIGANTEA POLLEN; BROMUS SECALINUS POLLEN; ALOPECURUS PRATENSIS POLLEN; PHLEUM PRATENSE POLLEN; FESTUCA PRATENSIS POLLEN; HOLCUS LANATUS POLLEN; LOLIUM PERENNE POLLEN; FAGUS SYLVATICA POLLEN; BETULA PENDULA POLLEN; QUERCUS ALBA POLLEN; FRAXINUS EXCELSIOR POLLEN; CORYLUS AMERICANA POLLEN; POPULUS NIGRA POLLEN; PLATANUS ORIENTALIS POLLEN; ULMUS GLABRA POLLEN; SALIX ALBA POLLEN; NARCISSUS PSEUDONARCISSUS; ROSA CANINA FLOWER; LILIUM CANDIDUM FLOWER; PRIMULA VULGARIS; DIANTHUS CARYOPHYLLUS FLOWER; ULEX EUROPAEUS FLOWER; CYTISUS SCOPARIUS POLLEN; CALLUNA VULGARIS POLLEN; CRATAEGUS MONOGYNA POLLEN; HISTAMINE DIHYDROCHLORIDE; JUNIPERUS VIRGINIANA TWIG; POPULUS BALSAMIFERA LEAF BUD; THYROID, UNSPECIFIED; TRIFOLIUM PRATENSE FLOWER; USTILAGO MAYDIS; ONION; ANTIMONY POTASSIUM TARTRATE; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BERBERIS VULGARIS ROOT BARK; BRYONIA ALBA ROOT; CHELIDONIUM MAJUS; EUPHRASIA STRICTA; GELSEMIUM SEMPERVIRENS ROOT; POTASSIUM DICHROMATE; POTASSIUM IODIDE; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; PULSATILLA VULGARIS; SCHOENOCAULON OFFICINALE SEED; DIOSCOREA VILLOSA TUBER; GINKGO; GOLDENSEAL; TARAXACUM OFFICINALE; ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "30; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 3; 3; 3; 3; 15",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Pollen Weeds Formulated for associated symptoms of Spring and early Summer pollens such as itchy eyes, sneezing, post-nasal drip, sore throat and sinus pressure."
},
{
"NDCCode": "60681-2308-1",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (60681-2308-1) > 1 mL in 1 VIAL, GLASS",
"NDC11Code": "60681-2308-01",
"ProductNDC": "60681-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pleo Not",
"NonProprietaryName": "Penicillium Chrysogenum Var. Chrysogenum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "19970319",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Sanum Kehlbeck GmbH & Co. KG",
"SubstanceName": "PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For temporary relief of coughs, fever and congestion due to colds and minor respiratory infections."
},
{
"NDCCode": "63629-2308-1",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (63629-2308-1) ",
"NDC11Code": "63629-2308-01",
"ProductNDC": "63629-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202214",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160407",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. C18H21NO3C4H6O6 2 1/2 H2O M.W. = 494.49. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. = 151.16. Hydrocodone Bitartrate and Acetaminophen Tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicon dioxide, and stearic acid. Meets USP Dissolution Test 2."
},
{
"NDCCode": "64942-2308-1",
"PackageDescription": "74 g in 1 CONTAINER (64942-2308-1) ",
"NDC11Code": "64942-2308-01",
"ProductNDC": "64942-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dove",
"NonProprietaryName": "Original Clean 48h Antiperspirant Deodorant",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Conopco Inc. d/b/a/ Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "15.2",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240801",
"SamplePackage": "N",
"IndicationAndUsage": "reduces underarm wetness. 48 Hour Protection."
},
{
"NDCCode": "70518-2308-1",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (70518-2308-1) ",
"NDC11Code": "70518-2308-01",
"ProductNDC": "70518-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204720",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"Description": "Glipizide extended-release tablets,USP contain glipizide which is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each extended-release film-coated tablet contains 2.63 mg glipizide, USP to provide a 2.5 mg dose. Each extended-release film-coated tablet contains 5.25 mg glipizide, USP to provide a 5 mg dose. Each extended-release film-coated tablet contains 10.50 mg glipizide, USP to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: cellulose acetate, ferrosoferric oxide, hypromellose, magnesium stearate, polyethylene glycol, polyethylene oxide, propylene glycol, red ferric oxide, shellac, sodium chloride, titanium dioxide. The 2.5 mg tablet also contains: FD&C blue#2, lactose monohydrate and triacetin. System Components and Performance Glipizide extended-release tablets are similar in appearance to a conventional tablet. It consists, however, of an osmotically active drug core surrounded by a semipermeable membrane. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. The membrane surrounding the tablet is permeable to water but not to drug or osmotic excipients. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, resulting in the release of drug through a small, laser-drilled orifice in the membrane on the drug side of the tablet. The function of the glipizide extended-release tablets depends upon the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the GI tract. The biologically inert components of the tablet remain intact during GI transit and are eliminated in the feces as an insoluble shell."
},
{
"NDCCode": "71028-2308-1",
"PackageDescription": "20 kg in 1 BOX (71028-2308-1) ",
"NDC11Code": "71028-2308-01",
"ProductNDC": "71028-2308",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20230808",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SUNJIN BEAUTY SCIENCE CO., LTD.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "08-AUG-23"
},
{
"NDCCode": "71335-2308-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (71335-2308-1) ",
"NDC11Code": "71335-2308-01",
"ProductNDC": "71335-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204821",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231214",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide."
},
{
"NDCCode": "72162-2308-1",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (72162-2308-1) ",
"NDC11Code": "72162-2308-01",
"ProductNDC": "72162-2308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078355",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240507",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine Tablets are a histamine-1 (H1) receptor antagonist indicated for: 1 Seasonal Allergic Rhinitis: relief of nasal and non-nasal symptoms in patients 12 years of age and older. (1.1), 2 Perennial Allergic Rhinitis: relief of nasal and non-nasal symptoms in patients 12 years of age and older. (1.2), 3 Chronic Idiopathic Urticaria: symptomatic relief of pruritus, reduction in the number of hives, and size of hives in patients 12 years of age and older. (1.3).",
"Description": "Desloratadine Tablets are light blue, round, tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine Tablets also contain the following excipients: microcrystalline cellulose NF, pregelatinized starch NF, croscarmellose sodium NF, talc USP, zinc stearate, USP and FD&C Blue #2 HT 11-14%. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has an empirical formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "37662-2308-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-2308-2) ",
"NDC11Code": "37662-2308-02",
"ProductNDC": "37662-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thiosinaminum",
"NonProprietaryName": "Thiosinaminum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALLYLTHIOUREA",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2308-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-2308-3) ",
"NDC11Code": "37662-2308-03",
"ProductNDC": "37662-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thiosinaminum",
"NonProprietaryName": "Thiosinaminum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALLYLTHIOUREA",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2308-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-2308-4) ",
"NDC11Code": "37662-2308-04",
"ProductNDC": "37662-2308",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thiosinaminum",
"NonProprietaryName": "Thiosinaminum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALLYLTHIOUREA",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N"
},
{
"NDCCode": "0409-0001-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) ",
"NDC11Code": "00409-0001-25",
"ProductNDC": "0409-0001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20250127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250127",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-0007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) ",
"NDC11Code": "00409-0007-10",
"ProductNDC": "0409-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-0016-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00409-0016-01",
"ProductNDC": "0409-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022234",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220110",
"SamplePackage": "N",
"Description": "Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "0409-0024-10",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) ",
"NDC11Code": "00409-0024-10",
"ProductNDC": "0409-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018801",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume."
},
{
"NDCCode": "0409-0025-10",
"PackageDescription": "12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) ",
"NDC11Code": "00409-0025-10",
"ProductNDC": "0409-0025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dobutamine In Dextrose",
"NonProprietaryName": "Dobutamine In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260316",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020201",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOBUTAMINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260316",
"SamplePackage": "N",
"IndicationAndUsage": "Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.",
"Description": "Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0409-0032-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) ",
"NDC11Code": "00409-0032-01",
"ProductNDC": "0409-0032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217459",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250929",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "0409-0042-12",
"PackageDescription": "12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) ",
"NDC11Code": "00409-0042-12",
"ProductNDC": "0409-0042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopamine Hydrochloride In Dextrose",
"NonProprietaryName": "Dopamine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018826",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOPAMINE HYDROCHLORIDE",
"StrengthNumber": "1.6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251103",
"SamplePackage": "N",
"IndicationAndUsage": "Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.",
"Description": "Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "0409-0106-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0106-01",
"ProductNDC": "0409-0106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC],Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170104",
"SamplePackage": "N"
},
{
"NDCCode": "0409-0120-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0120-01",
"ProductNDC": "0409-0120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210282",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "350",
"StrengthUnit": "mg/7mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210802",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown."
},
{
"NDCCode": "0409-0122-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0122-01) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0122-01",
"ProductNDC": "0409-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210282",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210802",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0409-2308-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-01) / 1 mL in 1 VIAL, SINGLE-DOSE (0409-2308-21) </PackageDescription>
<NDC11Code>00409-2308-01</NDC11Code>
<ProductNDC>0409-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20050614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-2308-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-02) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-2308-22) </PackageDescription>
<NDC11Code>00409-2308-02</NDC11Code>
<ProductNDC>0409-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20050614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-2308-49</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-49) / 1 mL in 1 VIAL, SINGLE-DOSE (0409-2308-69) </PackageDescription>
<NDC11Code>00409-2308-49</NDC11Code>
<ProductNDC>0409-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20051121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-2308-50</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-2308-50) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-2308-70) </PackageDescription>
<NDC11Code>00409-2308-50</NDC11Code>
<ProductNDC>0409-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20051121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>15631-2308-1</NDCCode>
<PackageDescription>1 CONTAINER in 1 CONTAINER (15631-2308-1) > 100 g in 1 CONTAINER</PackageDescription>
<NDC11Code>15631-2308-01</NDC11Code>
<ProductNDC>15631-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Berberis Aquarius</ProprietaryName>
<NonProprietaryName>Berberis Aquarius</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>MAHONIA AQUIFOLIUM ROOT BARK</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36987-2308-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2308-1)</PackageDescription>
<NDC11Code>36987-2308-01</NDC11Code>
<ProductNDC>36987-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Corn Grass</ProprietaryName>
<NonProprietaryName>Corn Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>ZEA MAYS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Cell-mediated Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2308-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-2308-1) </PackageDescription>
<NDC11Code>37662-2308-01</NDC11Code>
<ProductNDC>37662-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thiosinaminum</ProprietaryName>
<NonProprietaryName>Thiosinaminum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALLYLTHIOUREA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43742-2308-1</NDCCode>
<PackageDescription>960 mL in 1 CONTAINER (43742-2308-1) </PackageDescription>
<NDC11Code>43742-2308-01</NDC11Code>
<ProductNDC>43742-2308</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aacg-a, Aacg-b, Adenosinum Cyclophosphoricum, Berberinum, Calcarea Carbonica, Cinchona Officinalis, Cholinum, Colibacillinum Cum Natrum Muriaticum, Curcuma Longa, Methylcobalamin, Dna, Ferrum Metallicum, Panax Ginseng, L-glutamic Acid, Hepar Suis, Hypothalamus Suis, Indolum, Insulinum, Iodium, Lycopodium Clavatum, Magnesia Carbonica, L-methionine, Pancreas Suis, Stomach (suis), Zincum Metallicum, 7-oxo-dehydroepiandrosterone-3b-acetate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20260406</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Deseret Biologicals,Inc.</LabelerName>
<SubstanceName>7-KETO-DEHYDROEPIANDROSTERONE; ADENOSINE CYCLIC PHOSPHATE; APC-356433; APC-356434; ASIAN GINSENG; BERBERINE CHLORIDE; CHOLINE HYDROXIDE; CINCHONA OFFICINALIS BARK; ESCHERICHIA COLI; GLUTAMIC ACID; HERRING SPERM DNA; INDOLE; INSULIN HUMAN; IODINE; IRON; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM CARBONATE; METHIONINE; METHYLCOBALAMIN; OYSTER SHELL CALCIUM CARBONATE, CRUDE; PORK LIVER; SUS SCROFA HYPOTHALAMUS; SUS SCROFA PANCREAS; SUS SCROFA STOMACH; TURMERIC; ZINC</SubstanceName>
<StrengthNumber>60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60; 60</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-04-07</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>06-APR-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>50090-2308-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-2308-1) </PackageDescription>
<NDC11Code>50090-2308-01</NDC11Code>
<ProductNDC>50090-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079029</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inhibitors [MoA],Cytochrome P450 2D6 Inhibitors [MoA],Antiarrhythmic [EPC],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Cytochrome P450 1A2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55714-2308-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, GLASS (55714-2308-1)</PackageDescription>
<NDC11Code>55714-2308-01</NDC11Code>
<ProductNDC>55714-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pollen Weeds</ProprietaryName>
<NonProprietaryName>Xerophyllum Asphodeloides, Adrenalinum, Alfalfa, Aletris Farinosa, Artemisia Vulgaris, Bellis Perennis, Dysphania Ambrosioides, Lycopus Virginicus, Phytolacca American Root, Populus Tremuloides, Ptelea Trifoliata, Sambusus Nigra, Trillium Erectum Root, Elymus Repens Root, Urtica Urens, Wyethia Helenioides, Yucca Filamentosa, Avena Sativa Pollen, Cynosurus Cristatus Pollen. Echinochloa Crus-galli Pollen, Poa Pratensis Pollen, Anthoxanthum Odoratum Pollen, Agrostis Gigantea Pollen, Bromus Secalinus Pollen</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>XEROPHYLLUM ASPHODELOIDES; EPINEPHRINE; ALFALFA; ALETRIS FARINOSA ROOT; ARTEMISIA VULGARIS ROOT; BELLIS PERENNIS; DYSPHANIA AMBROSIOIDES; LYCOPUS VIRGINICUS; PHYTOLACCA AMERICANA ROOT; POPULUS TREMULOIDES LEAF; POPULUS TREMULOIDES BARK; PTELEA TRIFOLIATA BARK; SAMBUCUS NIGRA FLOWERING TOP; TRILLIUM ERECTUM ROOT; ELYMUS REPENS ROOT; URTICA URENS; WYETHIA HELENIOIDES ROOT; YUCCA FILAMENTOSA; AVENA SATIVA POLLEN; CYNOSURUS CRISTATUS POLLEN; ECHINOCHLOA CRUS-GALLI POLLEN; POA PRATENSIS POLLEN; AGROSTIS GIGANTEA POLLEN; BROMUS SECALINUS POLLEN; ALOPECURUS PRATENSIS POLLEN; PHLEUM PRATENSE POLLEN; FESTUCA PRATENSIS POLLEN; HOLCUS LANATUS POLLEN; LOLIUM PERENNE POLLEN; FAGUS SYLVATICA POLLEN; BETULA PENDULA POLLEN; QUERCUS ALBA POLLEN; FRAXINUS EXCELSIOR POLLEN; CORYLUS AMERICANA POLLEN; POPULUS NIGRA POLLEN; PLATANUS ORIENTALIS POLLEN; ULMUS GLABRA POLLEN; SALIX ALBA POLLEN; NARCISSUS PSEUDONARCISSUS; ROSA CANINA FLOWER; LILIUM CANDIDUM FLOWER; PRIMULA VULGARIS; DIANTHUS CARYOPHYLLUS FLOWER; ULEX EUROPAEUS FLOWER; CYTISUS SCOPARIUS POLLEN; CALLUNA VULGARIS POLLEN; CRATAEGUS MONOGYNA POLLEN; HISTAMINE DIHYDROCHLORIDE; JUNIPERUS VIRGINIANA TWIG; POPULUS BALSAMIFERA LEAF BUD; THYROID, UNSPECIFIED; TRIFOLIUM PRATENSE FLOWER; USTILAGO MAYDIS; ONION; ANTIMONY POTASSIUM TARTRATE; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BERBERIS VULGARIS ROOT BARK; BRYONIA ALBA ROOT; CHELIDONIUM MAJUS; EUPHRASIA STRICTA; GELSEMIUM SEMPERVIRENS ROOT; POTASSIUM DICHROMATE; POTASSIUM IODIDE; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; PULSATILLA VULGARIS; SCHOENOCAULON OFFICINALE SEED; DIOSCOREA VILLOSA TUBER; GINKGO; GOLDENSEAL; TARAXACUM OFFICINALE; ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>30; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 3; 3; 3; 3; 15</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pollen Weeds Formulated for associated symptoms of Spring and early Summer pollens such as itchy eyes, sneezing, post-nasal drip, sore throat and sinus pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60681-2308-1</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (60681-2308-1) > 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>60681-2308-01</NDC11Code>
<ProductNDC>60681-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pleo Not</ProprietaryName>
<NonProprietaryName>Penicillium Chrysogenum Var. Chrysogenum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970319</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Sanum Kehlbeck GmbH & Co. KG</LabelerName>
<SubstanceName>PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For temporary relief of coughs, fever and congestion due to colds and minor respiratory infections.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63629-2308-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (63629-2308-1) </PackageDescription>
<NDC11Code>63629-2308-01</NDC11Code>
<ProductNDC>63629-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202214</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. C18H21NO3C4H6O6 2 1/2 H2O M.W. = 494.49. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. = 151.16. Hydrocodone Bitartrate and Acetaminophen Tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicon dioxide, and stearic acid. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64942-2308-1</NDCCode>
<PackageDescription>74 g in 1 CONTAINER (64942-2308-1) </PackageDescription>
<NDC11Code>64942-2308-01</NDC11Code>
<ProductNDC>64942-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dove</ProprietaryName>
<NonProprietaryName>Original Clean 48h Antiperspirant Deodorant</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a/ Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>15.2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces underarm wetness. 48 Hour Protection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70518-2308-1</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (70518-2308-1) </PackageDescription>
<NDC11Code>70518-2308-01</NDC11Code>
<ProductNDC>70518-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204720</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Glipizide extended-release tablets,USP contain glipizide which is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each extended-release film-coated tablet contains 2.63 mg glipizide, USP to provide a 2.5 mg dose. Each extended-release film-coated tablet contains 5.25 mg glipizide, USP to provide a 5 mg dose. Each extended-release film-coated tablet contains 10.50 mg glipizide, USP to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: cellulose acetate, ferrosoferric oxide, hypromellose, magnesium stearate, polyethylene glycol, polyethylene oxide, propylene glycol, red ferric oxide, shellac, sodium chloride, titanium dioxide. The 2.5 mg tablet also contains: FD&C blue#2, lactose monohydrate and triacetin. System Components and Performance Glipizide extended-release tablets are similar in appearance to a conventional tablet. It consists, however, of an osmotically active drug core surrounded by a semipermeable membrane. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. The membrane surrounding the tablet is permeable to water but not to drug or osmotic excipients. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, resulting in the release of drug through a small, laser-drilled orifice in the membrane on the drug side of the tablet. The function of the glipizide extended-release tablets depends upon the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the GI tract. The biologically inert components of the tablet remain intact during GI transit and are eliminated in the feces as an insoluble shell.</Description>
</NDC>
<NDC>
<NDCCode>71028-2308-1</NDCCode>
<PackageDescription>20 kg in 1 BOX (71028-2308-1) </PackageDescription>
<NDC11Code>71028-2308-01</NDC11Code>
<ProductNDC>71028-2308</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20230808</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SUNJIN BEAUTY SCIENCE CO., LTD.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-AUG-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-2308-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71335-2308-1) </PackageDescription>
<NDC11Code>71335-2308-01</NDC11Code>
<ProductNDC>71335-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204821</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>72162-2308-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (72162-2308-1) </PackageDescription>
<NDC11Code>72162-2308-01</NDC11Code>
<ProductNDC>72162-2308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078355</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine Tablets are a histamine-1 (H1) receptor antagonist indicated for: 1 Seasonal Allergic Rhinitis: relief of nasal and non-nasal symptoms in patients 12 years of age and older. (1.1), 2 Perennial Allergic Rhinitis: relief of nasal and non-nasal symptoms in patients 12 years of age and older. (1.2), 3 Chronic Idiopathic Urticaria: symptomatic relief of pruritus, reduction in the number of hives, and size of hives in patients 12 years of age and older. (1.3).</IndicationAndUsage>
<Description>Desloratadine Tablets are light blue, round, tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine Tablets also contain the following excipients: microcrystalline cellulose NF, pregelatinized starch NF, croscarmellose sodium NF, talc USP, zinc stearate, USP and FD&C Blue #2 HT 11-14%. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has an empirical formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>37662-2308-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-2308-2) </PackageDescription>
<NDC11Code>37662-2308-02</NDC11Code>
<ProductNDC>37662-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thiosinaminum</ProprietaryName>
<NonProprietaryName>Thiosinaminum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALLYLTHIOUREA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2308-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-2308-3) </PackageDescription>
<NDC11Code>37662-2308-03</NDC11Code>
<ProductNDC>37662-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thiosinaminum</ProprietaryName>
<NonProprietaryName>Thiosinaminum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALLYLTHIOUREA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2308-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-2308-4) </PackageDescription>
<NDC11Code>37662-2308-04</NDC11Code>
<ProductNDC>37662-2308</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thiosinaminum</ProprietaryName>
<NonProprietaryName>Thiosinaminum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALLYLTHIOUREA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-0001-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) </PackageDescription>
<NDC11Code>00409-0001-25</NDC11Code>
<ProductNDC>0409-0001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20250127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-0007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) </PackageDescription>
<NDC11Code>00409-0007-10</NDC11Code>
<ProductNDC>0409-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0016-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00409-0016-01</NDC11Code>
<ProductNDC>0409-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220110</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022234</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>0409-0024-10</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) </PackageDescription>
<NDC11Code>00409-0024-10</NDC11Code>
<ProductNDC>0409-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250331</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018801</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume.</Description>
</NDC>
<NDC>
<NDCCode>0409-0025-10</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) </PackageDescription>
<NDC11Code>00409-0025-10</NDC11Code>
<ProductNDC>0409-0025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dobutamine In Dextrose</ProprietaryName>
<NonProprietaryName>Dobutamine In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260316</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020201</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOBUTAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.</IndicationAndUsage>
<Description>Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0409-0032-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) </PackageDescription>
<NDC11Code>00409-0032-01</NDC11Code>
<ProductNDC>0409-0032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217459</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>0409-0042-12</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) </PackageDescription>
<NDC11Code>00409-0042-12</NDC11Code>
<ProductNDC>0409-0042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopamine Hydrochloride In Dextrose</ProprietaryName>
<NonProprietaryName>Dopamine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018826</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOPAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.</IndicationAndUsage>
<Description>Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>0409-0106-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0106-01</NDC11Code>
<ProductNDC>0409-0106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC],Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-0120-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0120-01</NDC11Code>
<ProductNDC>0409-0120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210282</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/7mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>0409-0122-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0122-01) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0122-01</NDC11Code>
<ProductNDC>0409-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210282</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown.</Description>
</NDC>
</NDCList>