{
"NDC": [
{
"NDCCode": "0409-7332-01",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-7332-01) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-7332-11) ",
"NDC11Code": "00409-7332-01",
"ProductNDC": "0409-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone Sodium",
"NonProprietaryName": "Ceftriaxone Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20050509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065169",
"LabelerName": "Hospira, Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050509",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.",
"Description": "Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "0409-7332-20",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-7332-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-7332-21) ",
"NDC11Code": "00409-7332-20",
"ProductNDC": "0409-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone Sodium",
"NonProprietaryName": "Ceftriaxone Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20050509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065169",
"LabelerName": "Hospira, Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180319",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.",
"Description": "Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "0338-4210-02",
"PackageDescription": "1 KIT in 1 CARTON (0338-4210-02) * 1 mL in 1 VIAL, GLASS (0338-7112-01) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) ",
"NDC11Code": "00338-4210-02",
"ProductNDC": "0338-4210",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4301-02",
"PackageDescription": "1 KIT in 1 CARTON (0338-4301-02) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) * 1 mL in 1 VIAL, GLASS (0338-7112-01) ",
"NDC11Code": "00338-4301-02",
"ProductNDC": "0338-4301",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0904-7332-17",
"PackageDescription": "25 POUCH in 1 CARTON (0904-7332-17) / 1 SUPPOSITORY in 1 POUCH (0904-7332-01) ",
"NDC11Code": "00904-7332-17",
"ProductNDC": "0904-7332",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Glycerin",
"NonProprietaryName": "Glycerin Suppository",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20240713",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "MAJOR� PHARMACEUTICALS",
"SubstanceName": "GLYCERIN",
"StrengthNumber": "1.2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Glycerol [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Chemical Allergen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240713",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of occasional constipation. This product usually produces a bowel movement in 1/4 to 1 hour."
},
{
"NDCCode": "0944-4201-03",
"PackageDescription": "1 KIT in 1 CARTON (0944-4201-03) * 1 mL in 1 VIAL, GLASS (0944-7112-01) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01)",
"NDC11Code": "00944-4201-03",
"ProductNDC": "0944-4201",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "20110218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Deprecated",
"LastUpdate": "2014-05-05"
},
{
"NDCCode": "0944-4201-04",
"PackageDescription": "1 KIT in 1 CARTON (0944-4201-04) * 1 mL in 1 VIAL, GLASS (0944-7112-01) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01)",
"NDC11Code": "00944-4201-04",
"ProductNDC": "0944-4201",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "20110218",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Deprecated",
"LastUpdate": "2018-03-14",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0944-4210-02",
"PackageDescription": "1 KIT in 1 CARTON (0944-4210-02) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01) * 1 mL in 1 VIAL, GLASS (0944-7112-01) ",
"NDC11Code": "00944-4210-02",
"ProductNDC": "0944-4210",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190131",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190131",
"SamplePackage": "N"
},
{
"NDCCode": "0944-4301-02",
"PackageDescription": "1 KIT in 1 CARTON (0944-4301-02) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01) * 1 mL in 1 VIAL, GLASS (0944-7112-01) ",
"NDC11Code": "00944-4301-02",
"ProductNDC": "0944-4301",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190228",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190228",
"SamplePackage": "N"
},
{
"NDCCode": "50090-7332-1",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (50090-7332-1) ",
"NDC11Code": "50090-7332-01",
"ProductNDC": "50090-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230822",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217652",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241019",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27ClN2O2 . 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg, or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include: microcrystalline cellulose, colloidal silicon dioxide, crospovidone, lactose anhydrous, sodium starch glycolate, magnesium stearate, and purified water. Instacoat aqua III white inactive ingredients include: hypromellose, polydextrose, triacetin, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test-3."
},
{
"NDCCode": "63629-7332-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (63629-7332-1) ",
"NDC11Code": "63629-7332-01",
"ProductNDC": "63629-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate And Hydrochlorothiazide",
"NonProprietaryName": "Metoprolol Tartrate And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202870",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METOPROLOL TARTRATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170718",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7332-1",
"PackageDescription": "100 TABLET in 1 BOTTLE (68788-7332-1) ",
"NDC11Code": "68788-7332-01",
"ProductNDC": "68788-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Preferred Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190312",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 1.Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 2.Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 3.Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 4.Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease., 5 5.Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only)., 6 6.Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "71872-7332-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7332-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "71872-7332-01",
"ProductNDC": "71872-7332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20231110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201025",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241115",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by Streptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitiscaused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcusspp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilisand Salmonellaspp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand Proteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi (typhoid fever), other Salmonellaspp., and Shigellaspp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection, USP and other antibacterial drugs, ampicillin for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a white to off-white crystalline sterile powder and forms a clear colorless solution upon reconstitution with sterile water for injection, USP or Bacteriostatic water for injection, USP. Each vial of ampicillin for injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. The sodium content is 16.46 mg (0.71 mEq) per 250 mg, 32.91 mg (1.43 mEq) per 500 mg, 65.83 mg (2.86 mEq) per 1 g, 131.66 mg (5.72 mEq) per 2 g of ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "0338-4211-04",
"PackageDescription": "1 KIT in 1 CARTON (0338-4211-04) * 2 mL in 1 VIAL, GLASS (0338-7112-02) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) ",
"NDC11Code": "00338-4211-04",
"ProductNDC": "0338-4211",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4212-10",
"PackageDescription": "1 KIT in 1 CARTON (0338-4212-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) ",
"NDC11Code": "00338-4212-10",
"ProductNDC": "0338-4212",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4302-04",
"PackageDescription": "1 KIT in 1 CARTON (0338-4302-04) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) * 2 mL in 1 VIAL, GLASS (0338-7112-02) ",
"NDC11Code": "00338-4302-04",
"ProductNDC": "0338-4302",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4303-10",
"PackageDescription": "1 KIT in 1 CARTON (0338-4303-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) ",
"NDC11Code": "00338-4303-10",
"ProductNDC": "0338-4303",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0944-4211-04",
"PackageDescription": "1 KIT in 1 CARTON (0944-4211-04) * 2 mL in 1 VIAL, GLASS (0944-7332-02) * 2 mL in 1 VIAL, GLASS (0944-7201-02) * 2 mL in 1 VIAL, GLASS (0944-7401-02) * 2 mL in 1 VIAL, GLASS (0944-7112-02) ",
"NDC11Code": "00944-4211-04",
"ProductNDC": "0944-4211",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190131",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190131",
"SamplePackage": "N"
},
{
"NDCCode": "0944-4212-10",
"PackageDescription": "1 KIT in 1 CARTON (0944-4212-10) * 5 mL in 1 VIAL, GLASS (0944-7332-05) * 5 mL in 1 VIAL, GLASS (0944-7201-05) * 5 mL in 1 VIAL, GLASS (0944-7401-05) * 5 mL in 1 VIAL, GLASS (0944-7112-05) ",
"NDC11Code": "00944-4212-10",
"ProductNDC": "0944-4212",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190228",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190228",
"SamplePackage": "N"
},
{
"NDCCode": "0944-4302-04",
"PackageDescription": "1 KIT in 1 CARTON (0944-4302-04) * 2 mL in 1 VIAL, GLASS (0944-7332-02) * 2 mL in 1 VIAL, GLASS (0944-7201-02) * 2 mL in 1 VIAL, GLASS (0944-7401-02) * 2 mL in 1 VIAL, GLASS (0944-7112-02) ",
"NDC11Code": "00944-4302-04",
"ProductNDC": "0944-4302",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190131",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190131",
"SamplePackage": "N"
},
{
"NDCCode": "0944-4303-10",
"PackageDescription": "1 KIT in 1 CARTON (0944-4303-10) * 5 mL in 1 VIAL, GLASS (0944-7401-05) * 5 mL in 1 VIAL, GLASS (0944-7112-05) * 5 mL in 1 VIAL, GLASS (0944-7332-05) * 5 mL in 1 VIAL, GLASS (0944-7201-05) ",
"NDC11Code": "00944-4303-10",
"ProductNDC": "0944-4303",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"NonProprietaryName": "Fibrinogen Human And Thrombin Human",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"EndMarketingDate": "20190228",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxalta US Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980501",
"EndMarketingDatePackage": "20190228",
"SamplePackage": "N"
},
{
"NDCCode": "0409-0001-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) ",
"NDC11Code": "00409-0001-25",
"ProductNDC": "0409-0001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20250127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250127",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0409-0007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) ",
"NDC11Code": "00409-0007-10",
"ProductNDC": "0409-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "0409-0016-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00409-0016-01",
"ProductNDC": "0409-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022234",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220110",
"SamplePackage": "N",
"Description": "Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "0409-0024-10",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) ",
"NDC11Code": "00409-0024-10",
"ProductNDC": "0409-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018801",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume."
},
{
"NDCCode": "0409-0025-10",
"PackageDescription": "12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) ",
"NDC11Code": "00409-0025-10",
"ProductNDC": "0409-0025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dobutamine In Dextrose",
"NonProprietaryName": "Dobutamine In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260316",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020201",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOBUTAMINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260316",
"SamplePackage": "N",
"IndicationAndUsage": "Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.",
"Description": "Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0409-0032-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) ",
"NDC11Code": "00409-0032-01",
"ProductNDC": "0409-0032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217459",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250929",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "0409-0042-12",
"PackageDescription": "12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) ",
"NDC11Code": "00409-0042-12",
"ProductNDC": "0409-0042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopamine Hydrochloride In Dextrose",
"NonProprietaryName": "Dopamine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018826",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DOPAMINE HYDROCHLORIDE",
"StrengthNumber": "1.6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251103",
"SamplePackage": "N",
"IndicationAndUsage": "Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.",
"Description": "Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "0409-0106-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0106-01",
"ProductNDC": "0409-0106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202857",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC],Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170104",
"SamplePackage": "N"
},
{
"NDCCode": "0409-0120-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00409-0120-01",
"ProductNDC": "0409-0120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210282",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "350",
"StrengthUnit": "mg/7mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210802",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0409-7332-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-7332-01) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-7332-11) </PackageDescription>
<NDC11Code>00409-7332-01</NDC11Code>
<ProductNDC>0409-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
<NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20050509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065169</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
<Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>0409-7332-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-7332-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-7332-21) </PackageDescription>
<NDC11Code>00409-7332-20</NDC11Code>
<ProductNDC>0409-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
<NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20050509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065169</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
<Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>0338-4210-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4210-02) * 1 mL in 1 VIAL, GLASS (0338-7112-01) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) </PackageDescription>
<NDC11Code>00338-4210-02</NDC11Code>
<ProductNDC>0338-4210</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4301-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4301-02) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) * 1 mL in 1 VIAL, GLASS (0338-7112-01) </PackageDescription>
<NDC11Code>00338-4301-02</NDC11Code>
<ProductNDC>0338-4301</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0904-7332-17</NDCCode>
<PackageDescription>25 POUCH in 1 CARTON (0904-7332-17) / 1 SUPPOSITORY in 1 POUCH (0904-7332-01) </PackageDescription>
<NDC11Code>00904-7332-17</NDC11Code>
<ProductNDC>0904-7332</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Glycerin</ProprietaryName>
<NonProprietaryName>Glycerin Suppository</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20240713</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>MAJOR� PHARMACEUTICALS</LabelerName>
<SubstanceName>GLYCERIN</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Glycerol [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of occasional constipation. This product usually produces a bowel movement in 1/4 to 1 hour.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0944-4201-03</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4201-03) * 1 mL in 1 VIAL, GLASS (0944-7112-01) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01)</PackageDescription>
<NDC11Code>00944-4201-03</NDC11Code>
<ProductNDC>0944-4201</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20110218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2014-05-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>0944-4201-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4201-04) * 1 mL in 1 VIAL, GLASS (0944-7112-01) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01)</PackageDescription>
<NDC11Code>00944-4201-04</NDC11Code>
<ProductNDC>0944-4201</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20110218</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2018-03-14</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0944-4210-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4210-02) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01) * 1 mL in 1 VIAL, GLASS (0944-7112-01) </PackageDescription>
<NDC11Code>00944-4210-02</NDC11Code>
<ProductNDC>0944-4210</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190131</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0944-4301-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4301-02) * 1 mL in 1 VIAL, GLASS (0944-7332-01) * 1 mL in 1 VIAL, GLASS (0944-7201-01) * 1 mL in 1 VIAL, GLASS (0944-7401-01) * 1 mL in 1 VIAL, GLASS (0944-7112-01) </PackageDescription>
<NDC11Code>00944-4301-02</NDC11Code>
<ProductNDC>0944-4301</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190228</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-7332-1</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (50090-7332-1) </PackageDescription>
<NDC11Code>50090-7332-01</NDC11Code>
<ProductNDC>50090-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230822</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217652</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27ClN2O2 . 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg, or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include: microcrystalline cellulose, colloidal silicon dioxide, crospovidone, lactose anhydrous, sodium starch glycolate, magnesium stearate, and purified water. Instacoat aqua III white inactive ingredients include: hypromellose, polydextrose, triacetin, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test-3.</Description>
</NDC>
<NDC>
<NDCCode>63629-7332-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (63629-7332-1) </PackageDescription>
<NDC11Code>63629-7332-01</NDC11Code>
<ProductNDC>63629-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202870</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METOPROLOL TARTRATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7332-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (68788-7332-1) </PackageDescription>
<NDC11Code>68788-7332-01</NDC11Code>
<ProductNDC>68788-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 1.Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 2.Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 3.Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 4.Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease., 5 5.Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only)., 6 6.Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>71872-7332-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7332-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>71872-7332-01</NDC11Code>
<ProductNDC>71872-7332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20231110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201025</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by Streptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitiscaused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcusspp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilisand Salmonellaspp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand Proteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi (typhoid fever), other Salmonellaspp., and Shigellaspp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection, USP and other antibacterial drugs, ampicillin for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a white to off-white crystalline sterile powder and forms a clear colorless solution upon reconstitution with sterile water for injection, USP or Bacteriostatic water for injection, USP. Each vial of ampicillin for injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. The sodium content is 16.46 mg (0.71 mEq) per 250 mg, 32.91 mg (1.43 mEq) per 500 mg, 65.83 mg (2.86 mEq) per 1 g, 131.66 mg (5.72 mEq) per 2 g of ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>0338-4211-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4211-04) * 2 mL in 1 VIAL, GLASS (0338-7112-02) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) </PackageDescription>
<NDC11Code>00338-4211-04</NDC11Code>
<ProductNDC>0338-4211</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4212-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4212-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
<NDC11Code>00338-4212-10</NDC11Code>
<ProductNDC>0338-4212</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4302-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4302-04) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) * 2 mL in 1 VIAL, GLASS (0338-7112-02) </PackageDescription>
<NDC11Code>00338-4302-04</NDC11Code>
<ProductNDC>0338-4302</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4303-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4303-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
<NDC11Code>00338-4303-10</NDC11Code>
<ProductNDC>0338-4303</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0944-4211-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4211-04) * 2 mL in 1 VIAL, GLASS (0944-7332-02) * 2 mL in 1 VIAL, GLASS (0944-7201-02) * 2 mL in 1 VIAL, GLASS (0944-7401-02) * 2 mL in 1 VIAL, GLASS (0944-7112-02) </PackageDescription>
<NDC11Code>00944-4211-04</NDC11Code>
<ProductNDC>0944-4211</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190131</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0944-4212-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4212-10) * 5 mL in 1 VIAL, GLASS (0944-7332-05) * 5 mL in 1 VIAL, GLASS (0944-7201-05) * 5 mL in 1 VIAL, GLASS (0944-7401-05) * 5 mL in 1 VIAL, GLASS (0944-7112-05) </PackageDescription>
<NDC11Code>00944-4212-10</NDC11Code>
<ProductNDC>0944-4212</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190228</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0944-4302-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4302-04) * 2 mL in 1 VIAL, GLASS (0944-7332-02) * 2 mL in 1 VIAL, GLASS (0944-7201-02) * 2 mL in 1 VIAL, GLASS (0944-7401-02) * 2 mL in 1 VIAL, GLASS (0944-7112-02) </PackageDescription>
<NDC11Code>00944-4302-04</NDC11Code>
<ProductNDC>0944-4302</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190131</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0944-4303-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-4303-10) * 5 mL in 1 VIAL, GLASS (0944-7401-05) * 5 mL in 1 VIAL, GLASS (0944-7112-05) * 5 mL in 1 VIAL, GLASS (0944-7332-05) * 5 mL in 1 VIAL, GLASS (0944-7201-05) </PackageDescription>
<NDC11Code>00944-4303-10</NDC11Code>
<ProductNDC>0944-4303</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<NonProprietaryName>Fibrinogen Human And Thrombin Human</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<EndMarketingDate>20190228</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxalta US Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<EndMarketingDatePackage>20190228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-0001-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0409-0001-25) / 2 mL in 1 VIAL, SINGLE-DOSE (0409-0001-01) </PackageDescription>
<NDC11Code>00409-0001-25</NDC11Code>
<ProductNDC>0409-0001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20250127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride. The pH is adjusted to approximately 3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3∙HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0409-0007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-0007-10) / 20 mL in 1 VIAL, MULTI-DOSE (0409-0007-01) </PackageDescription>
<NDC11Code>00409-0007-10</NDC11Code>
<ProductNDC>0409-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0409-0016-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0409-0016-01) / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00409-0016-01</NDC11Code>
<ProductNDC>0409-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220110</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022234</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous) and multiple-dose vials containing 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>0409-0024-10</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0024-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-0024-01) </PackageDescription>
<NDC11Code>00409-0024-10</NDC11Code>
<ProductNDC>0409-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250331</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018801</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume.</Description>
</NDC>
<NDC>
<NDCCode>0409-0025-10</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0025-10) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0025-01) </PackageDescription>
<NDC11Code>00409-0025-10</NDC11Code>
<ProductNDC>0409-0025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dobutamine In Dextrose</ProprietaryName>
<NonProprietaryName>Dobutamine In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260316</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020201</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOBUTAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dobutamine in 5% Dextrose Injection is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risks of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.</IndicationAndUsage>
<Description>Dobutamine in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, prediluted solution of dobutamine hydrochloride and dextrose in water for injection. It is administered by intravenous infusion. Each 100 mL contains dobutamine hydrochloride equivalent to 100 mg, 200 mg, or 400 mg of dobutamine; dextrose (derived from corn), hydrous 5 g in water for injection, with sodium metabisulfite 25 mg and edetate disodium, dihydrate 10 mg added as stabilizers; osmolar concentration, respectively, 263, 270, or 284 mOsmol/liter (calc.). The pH is 2.5 to 5.5. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dobutamine in 5% Dextrose Injection, USP is oxygen sensitive. Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Water can permeate from inside the flexible plastic container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0409-0032-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) </PackageDescription>
<NDC11Code>00409-0032-01</NDC11Code>
<ProductNDC>0409-0032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217459</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>0409-0042-12</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-0042-12) / 1 BAG in 1 POUCH / 250 mL in 1 BAG (0409-0042-01) </PackageDescription>
<NDC11Code>00409-0042-12</NDC11Code>
<ProductNDC>0409-0042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopamine Hydrochloride In Dextrose</ProprietaryName>
<NonProprietaryName>Dopamine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018826</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DOPAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dopamine Hydrochloride in Dextrose Injection is indicated to improve hemodynamic status in patients in distributive shock, or shock due to reduced cardiac output.</IndicationAndUsage>
<Description>Dopamine Hydrochloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic, premixed solution of dopamine hydrochloride in 5% dextrose injection for intravenous infusion. Each 100 mL contains 160 mg (1,600 mcg/mL) or 320 mg (3,200 mcg/mL) of dopamine HCl; 5 grams of hydrous dextrose, in Water for Injection, and 50 mg of sodium metabisulfite (a stabilizer); pH = 2.5 to 4.5, and the following osmolar concentrations: 269, or 286 mOsmol/liter, respectively. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. Dopamine HCl is chemically designated 3, 4-dihydroxyphenethylamine hydrochloride (C8H11NO2 ∙ HCl), a white crystalline powder freely soluble in water. Dopamine HCl has a molecular weight of 189.64 and it has the following structural formula. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring endogenous catecholamine. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17 and it has the following structural formula. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>0409-0106-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0106-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0106-01</NDC11Code>
<ProductNDC>0409-0106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202857</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC],Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0409-0120-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0409-0120-01) / 7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00409-0120-01</NDC11Code>
<ProductNDC>0409-0120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210282</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/7mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210802</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult patients (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2).</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L‑threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1‑ lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 53.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 76.8 mg citric acid. Sodium hydroxide is used to adjust the pH. Freshly reconstituted solutions of Daptomycin for Injection range in color from light yellow to light brown.</Description>
</NDC>
</NDCList>