RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "0409-9257-39",
      "PackageDescription": "12 POUCH in 1 CASE (0409-9257-39)  > 1 BAG in 1 POUCH > 1000 mL in 1 BAG",
      "NDC11Code": "00409-9257-39",
      "ProductNDC": "0409-9257",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Potassium Chloride In Sodium Chloride",
      "NonProprietaryName": "Sodium Chloride And Potassium Chloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20081205",
      "EndMarketingDate": "20200901",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078446",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "SODIUM CHLORIDE; POTASSIUM CHLORIDE",
      "StrengthNumber": "4.5; 1.49",
      "StrengthUnit": "g/1000mL; g/1000mL",
      "Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2020-09-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20081205",
      "EndMarketingDatePackage": "20200901",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "0990-9257-39",
      "PackageDescription": "12 POUCH in 1 CASE (0990-9257-39)  / 1 BAG in 1 POUCH / 1000 mL in 1 BAG",
      "NDC11Code": "00990-9257-39",
      "ProductNDC": "0990-9257",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Potassium Chloride In Sodium Chloride",
      "NonProprietaryName": "Sodium Chloride And Potassium Chloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20200101",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078446",
      "LabelerName": "ICU Medical Inc.",
      "SubstanceName": "SODIUM CHLORIDE; POTASSIUM CHLORIDE",
      "StrengthNumber": "4.5; 1.49",
      "StrengthUnit": "g/1000mL; g/1000mL",
      "Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-23",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200301",
      "SamplePackage": "N",
      "IndicationAndUsage": "Potassium Chloride in Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.",
      "Description": "Potassium Chloride in Sodium Chloride Injection, USP is a sterile, nonpyrogenic, solution for fluid and electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH and ionic concentration are shown in Table 1. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
    },
    {
      "NDCCode": "0409-8060-29",
      "PackageDescription": "10 CARTON in 1 PACKAGE (0409-8060-29)  > 1 SYRINGE in 1 CARTON > 20 mL in 1 SYRINGE (0409-8060-39) ",
      "NDC11Code": "00409-8060-29",
      "ProductNDC": "0409-8060",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Amidate",
      "NonProprietaryName": "Etomidate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20051007",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA018227",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "ETOMIDATE",
      "StrengthNumber": "2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "General Anesthesia [PE],General Anesthetic [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2020-08-25",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20201231",
      "StartMarketingDatePackage": "20051007",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "0409-0468-05",
      "PackageDescription": "1 BOTTLE in 1 CARTON (0409-0468-05)  > 500 mL in 1 BOTTLE",
      "NDC11Code": "00409-0468-05",
      "ProductNDC": "0409-0468",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Novamine",
      "NonProprietaryName": "Lysine Acetate, Leucine, Phenylalanine, Valine, Isoleucine, Methionine, Threonine, Tryptophan, Alanine, Arginine, Glycine, Histidine, Proline, Glutamic Acid, Serine, Aspartic Acid, And Tyrosine",
      "DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20111122",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA017957",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "LYSINE ACETATE; LEUCINE; PHENYLALANINE; VALINE; ISOLEUCINE; METHIONINE; THREONINE; TRYPTOPHAN; ALANINE; ARGININE; GLYCINE; HISTIDINE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE",
      "StrengthNumber": "1.18; 1.04; 1.04; 960; 749; 749; 749; 250; 2.17; 1.47; 1.04; 894; 894; 749; 592; 434; 39",
      "StrengthUnit": "g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
      "Pharm_Classes": "Amino Acid [EPC],Amino Acids [Chemical/Ingredient]",
      "Status": "Deprecated",
      "LastUpdate": "2018-09-19",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20181231"
    },
    {
      "NDCCode": "0409-1775-10",
      "PackageDescription": "10 CARTON in 1 PACKAGE (0409-1775-10)  / 1 SYRINGE, PLASTIC in 1 CARTON / 10 mL in 1 SYRINGE, PLASTIC (0409-1775-40) ",
      "NDC11Code": "00409-1775-10",
      "ProductNDC": "0409-1775",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Dextrose",
      "NonProprietaryName": "Dextrose Monohydrate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060222",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA019445",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "DEXTROSE MONOHYDRATE",
      "StrengthNumber": "250",
      "StrengthUnit": "mg/mL",
      "Status": "Active",
      "LastUpdate": "2026-07-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20060222",
      "SamplePackage": "N",
      "IndicationAndUsage": "Dextrose Injection (25%) is indicated for the treatment of acute symptomatic episodes of hypoglycemia in pediatric patients from birth up to 2 years of age.",
      "Description": "Dextrose, USP is chemically designated D-glucose monohydrate, (C6H12O6  H2O), a hexose sugar freely soluble in water, with the following structural formula. Water for Injection, USP is chemically designated H2O. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. Dextrose Injection, USP (25%) is a sterile, nonpyrogenic, hypertonic solution of dextrose in water for intravenous injection. Each milliliter (mL) of fluid contains 0.25 grams of dextrose, hydrous, which delivers 3.4 kcal/gram (0.85 kcal/mL). The solution has an osmolarity of 1.39 mOsmol/mL (calculation) and the pH range is 3.2 to 6.5. May contain hydrochloric acid and sodium hydroxide for pH adjustment. The solution contains no bacteriostatic, antimicrobial agent or added buffer (except for pH adjustment) and is supplied in a single-dose Ansyr Plastic Syringe. Dextrose is derived from corn."
    },
    {
      "NDCCode": "0409-2689-01",
      "PackageDescription": "10 VIAL in 1 TRAY (0409-2689-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0409-2689-21) ",
      "NDC11Code": "00409-2689-01",
      "ProductNDC": "0409-2689",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin And Sulbactam",
      "NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060725",
      "EndMarketingDate": "20261031",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065310",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
      "StrengthNumber": "1; .5",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2026-01-23",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170825",
      "EndMarketingDatePackage": "20261031",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*. NOTE: For information on use in pediatric patients (see PRECAUTIONS - Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
      "Description": "Ampicillin and sulbactam for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and sulbactam for injection, USP parenteral combination, is available as a white to yellowish dry powder for reconstitution. Ampicillin and sulbactam for injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g ADD-Vantage® vial contains 1.5 g ampicillin and sulbactam for injection, USP (equivalent to 1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt). The sodium content is 115 mg (5 mEq). Each 3 g ADD-Vantage® vial contains 3 g ampicillin and sulbactam for injection, USP (equivalent to 2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt). The sodium content is 230 mg (10 mEq)."
    },
    {
      "NDCCode": "0409-2987-03",
      "PackageDescription": "10 VIAL in 1 TRAY (0409-2987-03)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0409-2987-23) ",
      "NDC11Code": "00409-2987-03",
      "ProductNDC": "0409-2987",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin And Sulbactam",
      "NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060725",
      "EndMarketingDate": "20261031",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065310",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
      "StrengthNumber": "2; 1",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2026-08-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170915",
      "EndMarketingDatePackage": "20260731",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*. NOTE: For information on use in pediatric patients (see PRECAUTIONS - Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
      "Description": "Ampicillin and sulbactam for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and sulbactam for injection, USP parenteral combination, is available as a white to yellowish dry powder for reconstitution. Ampicillin and sulbactam for injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g ADD-Vantage® vial contains 1.5 g ampicillin and sulbactam for injection, USP (equivalent to 1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt). The sodium content is 115 mg (5 mEq). Each 3 g ADD-Vantage® vial contains 3 g ampicillin and sulbactam for injection, USP (equivalent to 2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt). The sodium content is 230 mg (10 mEq)."
    },
    {
      "NDCCode": "0409-3374-02",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3374-02)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3374-11) ",
      "NDC11Code": "00409-3374-02",
      "ProductNDC": "0409-3374",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065363",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "2; .25",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2025-04-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20101021",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3378-13",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3378-13)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3378-11) ",
      "NDC11Code": "00409-3378-13",
      "ProductNDC": "0409-3378",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065363",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "3; .375",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2025-04-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20101021",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3379-04",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3379-04)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3379-11) ",
      "NDC11Code": "00409-3379-04",
      "ProductNDC": "0409-3379",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065363",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "4; .5",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2025-04-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20101021",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3383-02",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-02)  / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) ",
      "NDC11Code": "00409-3383-02",
      "ProductNDC": "0409-3383",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "2; .25",
      "StrengthUnit": "g/10mL; g/10mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2026-07-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20101021",
      "EndMarketingDatePackage": "20261231",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3383-10",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-10)  / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) ",
      "NDC11Code": "00409-3383-10",
      "ProductNDC": "0409-3383",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "2; .25",
      "StrengthUnit": "g/10mL; g/10mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2026-07-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20250609",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3385-13",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3385-13)  / 15 mL in 1 VIAL, SINGLE-USE (0409-3385-11) ",
      "NDC11Code": "00409-3385-13",
      "ProductNDC": "0409-3385",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "3; .375",
      "StrengthUnit": "g/15mL; g/15mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2025-06-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20101021",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3385-15",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3385-15)  / 15 mL in 1 VIAL, SINGLE-USE (0409-3385-11) ",
      "NDC11Code": "00409-3385-15",
      "ProductNDC": "0409-3385",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "3; .375",
      "StrengthUnit": "g/15mL; g/15mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2026-07-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20250609",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3390-04",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3390-04)  / 20 mL in 1 VIAL, SINGLE-USE (0409-3390-11) ",
      "NDC11Code": "00409-3390-04",
      "ProductNDC": "0409-3390",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "4; .5",
      "StrengthUnit": "g/20mL; g/20mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2025-06-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20101021",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3390-10",
      "PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3390-10)  / 20 mL in 1 VIAL, SINGLE-USE (0409-3390-11) ",
      "NDC11Code": "00409-3390-10",
      "ProductNDC": "0409-3390",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Piperacillin And Tazobactam",
      "NonProprietaryName": "Piperacillin And Tazobactam",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS; PARENTERAL",
      "StartMarketingDate": "20101021",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065362",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
      "StrengthNumber": "4; .5",
      "StrengthUnit": "g/20mL; g/20mL",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2026-07-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20250609",
      "SamplePackage": "N",
      "IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
      "Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
    },
    {
      "NDCCode": "0409-3515-01",
      "PackageDescription": "10 VIAL in 1 TRAY (0409-3515-01)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0409-3515-11) ",
      "NDC11Code": "00409-3515-01",
      "ProductNDC": "0409-3515",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20210528",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062912",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1.5",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-04-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20210528",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg, 1 g or 1.5 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, 1 g of the base are equivalent to 0.67 mmol and 1.5 g of the base are equivalent to 1.01 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "0409-3718-01",
      "PackageDescription": "10 VIAL, GLASS in 1 PACKAGE (0409-3718-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0409-3718-10) ",
      "NDC11Code": "00409-3718-01",
      "ProductNDC": "0409-3718",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin",
      "NonProprietaryName": "Ampicillin Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20170801",
      "EndMarketingDate": "20241130",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA061395",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2024-12-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170801",
      "EndMarketingDatePackage": "20241130",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
      "Description": "Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
    },
    {
      "NDCCode": "0409-3720-01",
      "PackageDescription": "10 VIAL, GLASS in 1 PACKAGE (0409-3720-01)  > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0409-3720-10) ",
      "NDC11Code": "00409-3720-01",
      "ProductNDC": "0409-3720",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin",
      "NonProprietaryName": "Ampicillin Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20170801",
      "EndMarketingDate": "20240229",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA061395",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM",
      "StrengthNumber": "2",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2024-03-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170801",
      "EndMarketingDatePackage": "20240229",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
      "Description": "Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
    },
    {
      "NDCCode": "0409-3725-01",
      "PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 PACKAGE (0409-3725-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (0409-3725-11) ",
      "NDC11Code": "00409-3725-01",
      "ProductNDC": "0409-3725",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin",
      "NonProprietaryName": "Ampicillin Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20170801",
      "EndMarketingDate": "20240731",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA061395",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM",
      "StrengthNumber": "10",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2024-07-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170801",
      "EndMarketingDatePackage": "20240731",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
      "Description": "Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. The pharmacy bulk package contains sterile ampicillin sodium equivalent to 10 grams ampicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The solution after reconstitution is clear, colorless and free from visible particulates. Each Pharmacy Bulk Package bottle contains ampicillin sodium equivalent to 10 grams of ampicillin. The sodium content is 65.8 mg (2.9 mEq) per one gram ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
    },
    {
      "NDCCode": "0409-3726-01",
      "PackageDescription": "10 VIAL, GLASS in 1 PACKAGE (0409-3726-01)  > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0409-3726-10) ",
      "NDC11Code": "00409-3726-01",
      "ProductNDC": "0409-3726",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin",
      "NonProprietaryName": "Ampicillin Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20170801",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA061395",
      "LabelerName": "Hospira, Inc",
      "SubstanceName": "AMPICILLIN SODIUM",
      "StrengthNumber": "1",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2024-05-20",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20241231",
      "StartMarketingDatePackage": "20170801",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
      "Description": "Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
    },
    {
      "NDCCode": "0409-4332-01",
      "PackageDescription": "10 VIAL in 1 TRAY (0409-4332-01)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0409-4332-11) ",
      "NDC11Code": "00409-4332-01",
      "ProductNDC": "0409-4332",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20050430",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062911",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-04-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20050430",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg, 1 g or 1.5 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, 1 g of the base are equivalent to 0.67 mmol and 1.5 g of the base are equivalent to 1.01 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "0409-6531-01",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (0409-6531-01)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (0409-6531-11) ",
      "NDC11Code": "00409-6531-01",
      "ProductNDC": "0409-6531",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20120323",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062933",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "750",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2026-05-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20120323",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in ADD-Vantage® vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, and 1 g of the base are equivalent to 0.67 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin Hydrochloride has the following structural formula. The solutions contain no bacteriostat, antimicrobial agent (except vancomycin) or buffer and are intended for use only as a single-dose injection only with the ADD-Vantage Flexible Diluent Container."
    },
    {
      "NDCCode": "0409-6531-02",
      "PackageDescription": "10 VIAL in 1 TRAY (0409-6531-02)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0409-6531-12) ",
      "NDC11Code": "00409-6531-02",
      "ProductNDC": "0409-6531",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20090327",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062912",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "750",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-04-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20090327",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg, 1 g or 1.5 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, 1 g of the base are equivalent to 0.67 mmol and 1.5 g of the base are equivalent to 1.01 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "0409-6533-21",
      "PackageDescription": "10 VIAL in 1 CARTON (0409-6533-21)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0409-6533-11) ",
      "NDC11Code": "00409-6533-21",
      "ProductNDC": "0409-6533",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20050331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062912",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-04-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20210322",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg, 1 g or 1.5 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, 1 g of the base are equivalent to 0.67 mmol and 1.5 g of the base are equivalent to 1.01 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "0409-6533-31",
      "PackageDescription": "10 VIAL in 1 CARTON (0409-6533-31)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0409-6533-59) ",
      "NDC11Code": "00409-6533-31",
      "ProductNDC": "0409-6533",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20200218",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062912",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-04-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200218",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol and 1 g of the base are equivalent to 0.67 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "0409-6535-01",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (0409-6535-01)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (0409-6535-11) ",
      "NDC11Code": "00409-6535-01",
      "ProductNDC": "0409-6535",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20050430",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA062933",
      "LabelerName": "Hospira, Inc.",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2026-05-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20050430",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin hydrochloride for injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection and other antibacterial drugs, vancomycin hydrochloride for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in ADD-Vantage® vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol, 750 mg of the base are equivalent to 0.51 mmol, and 1 g of the base are equivalent to 0.67 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 ∙ HCl and the molecular weight is 1,485.74. Vancomycin Hydrochloride has the following structural formula. The solutions contain no bacteriostat, antimicrobial agent (except vancomycin) or buffer and are intended for use only as a single-dose injection only with the ADD-Vantage Flexible Diluent Container."
    },
    {
      "NDCCode": "0480-9257-08",
      "PackageDescription": "1 KIT in 1 KIT (0480-9257-08)  *  8 mL in 1 VIAL, SINGLE-DOSE (0480-9256-01)  *  2 mL in 1 SYRINGE (0480-9263-21) ",
      "NDC11Code": "00480-9257-08",
      "ProductNDC": "0480-9257",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Octreotide Acetate",
      "NonProprietaryName": "Octreotide Acetate",
      "DosageFormName": "KIT",
      "RouteName": "INTRAMUSCULAR",
      "StartMarketingDate": "20250320",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA210317",
      "LabelerName": "Teva Pharmaceuticals, Inc.",
      "Status": "Active",
      "LastUpdate": "2025-04-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20250320",
      "SamplePackage": "N",
      "IndicationAndUsage": "Octreotide acetate for injectable suspension 10 mg, 20 mg, and 30 mg is indicated in patients in whom initial treatment with octreotide acetate injection has been shown to be effective and tolerated.",
      "Description": "Octreotide is the acetate salt of a cyclic octapeptide. It is a long-acting octapeptide with pharmacologic properties mimicking those of the natural hormone somatostatin. Octreotide is known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxy-methyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*,R*)]. The molecular weight of octreotide is 1019.3 g/mol (free peptide, C49H66N10O10S2) and its amino acid sequence is. Octreotide acetate for injectable suspension is available in a single-dose vial containing the sterile drug product, which when mixed with diluent, becomes a suspension that is given as a monthly intragluteal injection. The octreotide is uniformly distributed within the microspheres which are made of a biodegradable glucose star polymer, D,L-lactic and glycolic acids copolymer. Sterile mannitol is added to the microspheres to improve suspendability. Octreotide acetate for injectable suspension is available as: sterile 8-mL single-dose vials in 3 strengths delivering 10 mg, 20 mg, or 30 mg octreotide-free peptide. Each single-dose vial of octreotide acetate for injectable suspension delivers."
    },
    {
      "NDCCode": "0597-9257-59",
      "PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0597-9257-59)  / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
      "NDC11Code": "00597-9257-59",
      "ProductNDC": "0597-9257",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Hernexeos",
      "NonProprietaryName": "Zongertinib",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20250808",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA219042",
      "LabelerName": "Boehringer Ingelheim Pharmaceuticals, Inc.",
      "SubstanceName": "ZONGERTINIB",
      "StrengthNumber": "60",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], HER2/Neu/cerbB2 Antagonists [MoA], Kinase Inhibitor [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-15",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260106",
      "SamplePackage": "N",
      "IndicationAndUsage": "HERNEXEOS is indicated for the treatment of adult patients with unresectable or metastatic non-squamous non-small cell lung cancer (NSCLC) whose tumors have HER2 (ERBB2) tyrosine kinase domain activating mutations, as detected by an FDA-authorized test [see Dosage and Administration (2.1)]. This indication is approved under accelerated approval based on objective response rate and duration of response [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial.",
      "Description": "HERNEXEOS tablets for oral administration contain zongertinib, a kinase inhibitor. The chemical name of zongertinib is 2-Propenamide, N-[1-[8-[[3-methyl-4-[(1-methyl-1H-benzimidazol-5-yl)oxy]phenyl] amino]pyrimido[5,4-d]pyrimidin-2-yl]-4-piperidinyl]-. Its molecular formula is C29H29N9O2 and the molecular weight is 535.6. The structural formula is. Zongertinib is a yellow to dark yellow or orange solid. Zongertinib is slightly soluble at pH 1.2, and practically insoluble at pHs 3.6, 4.5, 5.4 and 6.8. Each film-coated tablet of HERNEXEOS contains 60 mg of zongertinib and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, mannitol, microcrystalline cellulose, and sodium stearyl fumarate. In addition, the film-coating contains the following inactive ingredients: ferric oxide (yellow), glycerol mono and dicaprylocaprate, polyvinyl alcohol, sodium lauryl sulfate, talc, and titanium dioxide."
    },
    {
      "NDCCode": "0597-9257-86",
      "PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0597-9257-86)  / 60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
      "NDC11Code": "00597-9257-86",
      "ProductNDC": "0597-9257",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Hernexeos",
      "NonProprietaryName": "Zongertinib",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20250808",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA219042",
      "LabelerName": "Boehringer Ingelheim Pharmaceuticals, Inc.",
      "SubstanceName": "ZONGERTINIB",
      "StrengthNumber": "60",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], HER2/Neu/cerbB2 Antagonists [MoA], Kinase Inhibitor [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-15",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20250808",
      "SamplePackage": "N",
      "IndicationAndUsage": "HERNEXEOS is indicated for the treatment of adult patients with unresectable or metastatic non-squamous non-small cell lung cancer (NSCLC) whose tumors have HER2 (ERBB2) tyrosine kinase domain activating mutations, as detected by an FDA-authorized test [see Dosage and Administration (2.1)]. This indication is approved under accelerated approval based on objective response rate and duration of response [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial.",
      "Description": "HERNEXEOS tablets for oral administration contain zongertinib, a kinase inhibitor. The chemical name of zongertinib is 2-Propenamide, N-[1-[8-[[3-methyl-4-[(1-methyl-1H-benzimidazol-5-yl)oxy]phenyl] amino]pyrimido[5,4-d]pyrimidin-2-yl]-4-piperidinyl]-. Its molecular formula is C29H29N9O2 and the molecular weight is 535.6. The structural formula is. Zongertinib is a yellow to dark yellow or orange solid. Zongertinib is slightly soluble at pH 1.2, and practically insoluble at pHs 3.6, 4.5, 5.4 and 6.8. Each film-coated tablet of HERNEXEOS contains 60 mg of zongertinib and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, mannitol, microcrystalline cellulose, and sodium stearyl fumarate. In addition, the film-coating contains the following inactive ingredients: ferric oxide (yellow), glycerol mono and dicaprylocaprate, polyvinyl alcohol, sodium lauryl sulfate, talc, and titanium dioxide."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"0409-9257-39","ProprietaryName":"Potassium Chloride In Sodium Chloride","NonProprietaryName":"Sodium Chloride And Potassium Chloride"},{"NDCCode":"0990-9257-39","ProprietaryName":"Potassium Chloride In Sodium Chloride","NonProprietaryName":"Sodium Chloride And Potassium Chloride"},{"NDCCode":"0409-8060-29","ProprietaryName":"Amidate","NonProprietaryName":"Etomidate"},{"NDCCode":"0409-0468-05","ProprietaryName":"Novamine","NonProprietaryName":"Lysine Acetate, Leucine, Phenylalanine, Valine, Isoleucine, Methionine, Threonine, Tryptophan, Alanine, Arginine, Glycine, Histidine, Proline, Glutamic Acid, Serine, Aspartic Acid, And Tyrosine"},{"NDCCode":"0409-1775-10","ProprietaryName":"Dextrose","NonProprietaryName":"Dextrose Monohydrate"},{"NDCCode":"0409-2689-01","ProprietaryName":"Ampicillin And Sulbactam","NonProprietaryName":"Ampicillin Sodium And Sulbactam Sodium"},{"NDCCode":"0409-2987-03","ProprietaryName":"Ampicillin And Sulbactam","NonProprietaryName":"Ampicillin Sodium And Sulbactam Sodium"},{"NDCCode":"0409-3374-02","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3378-13","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3379-04","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3383-02","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3383-10","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3385-13","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3385-15","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3390-04","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3390-10","ProprietaryName":"Piperacillin And Tazobactam","NonProprietaryName":"Piperacillin And Tazobactam"},{"NDCCode":"0409-3515-01","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-3718-01","ProprietaryName":"Ampicillin","NonProprietaryName":"Ampicillin Sodium"},{"NDCCode":"0409-3720-01","ProprietaryName":"Ampicillin","NonProprietaryName":"Ampicillin Sodium"},{"NDCCode":"0409-3725-01","ProprietaryName":"Ampicillin","NonProprietaryName":"Ampicillin Sodium"},{"NDCCode":"0409-3726-01","ProprietaryName":"Ampicillin","NonProprietaryName":"Ampicillin Sodium"},{"NDCCode":"0409-4332-01","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-6531-01","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-6531-02","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-6533-21","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-6533-31","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0409-6535-01","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0480-9257-08","ProprietaryName":"Octreotide Acetate","NonProprietaryName":"Octreotide Acetate"},{"NDCCode":"0597-9257-59","ProprietaryName":"Hernexeos","NonProprietaryName":"Zongertinib"},{"NDCCode":"0597-9257-86","ProprietaryName":"Hernexeos","NonProprietaryName":"Zongertinib"}]}
                    

<NDCList><NDC><NDCCode>0409-9257-39</NDCCode><ProprietaryName>Potassium Chloride In Sodium Chloride</ProprietaryName><NonProprietaryName>Sodium Chloride And Potassium Chloride</NonProprietaryName></NDC><NDC><NDCCode>0990-9257-39</NDCCode><ProprietaryName>Potassium Chloride In Sodium Chloride</ProprietaryName><NonProprietaryName>Sodium Chloride And Potassium Chloride</NonProprietaryName></NDC><NDC><NDCCode>0409-8060-29</NDCCode><ProprietaryName>Amidate</ProprietaryName><NonProprietaryName>Etomidate</NonProprietaryName></NDC><NDC><NDCCode>0409-0468-05</NDCCode><ProprietaryName>Novamine</ProprietaryName><NonProprietaryName>Lysine Acetate, Leucine, Phenylalanine, Valine, Isoleucine, Methionine, Threonine, Tryptophan, Alanine, Arginine, Glycine, Histidine, Proline, Glutamic Acid, Serine, Aspartic Acid, And Tyrosine</NonProprietaryName></NDC><NDC><NDCCode>0409-1775-10</NDCCode><ProprietaryName>Dextrose</ProprietaryName><NonProprietaryName>Dextrose Monohydrate</NonProprietaryName></NDC><NDC><NDCCode>0409-2689-01</NDCCode><ProprietaryName>Ampicillin And Sulbactam</ProprietaryName><NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-2987-03</NDCCode><ProprietaryName>Ampicillin And Sulbactam</ProprietaryName><NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-3374-02</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3378-13</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3379-04</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3383-02</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3383-10</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3385-13</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3385-15</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3390-04</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3390-10</NDCCode><ProprietaryName>Piperacillin And Tazobactam</ProprietaryName><NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName></NDC><NDC><NDCCode>0409-3515-01</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-3718-01</NDCCode><ProprietaryName>Ampicillin</ProprietaryName><NonProprietaryName>Ampicillin Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-3720-01</NDCCode><ProprietaryName>Ampicillin</ProprietaryName><NonProprietaryName>Ampicillin Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-3725-01</NDCCode><ProprietaryName>Ampicillin</ProprietaryName><NonProprietaryName>Ampicillin Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-3726-01</NDCCode><ProprietaryName>Ampicillin</ProprietaryName><NonProprietaryName>Ampicillin Sodium</NonProprietaryName></NDC><NDC><NDCCode>0409-4332-01</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-6531-01</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-6531-02</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-6533-21</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-6533-31</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0409-6535-01</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0480-9257-08</NDCCode><ProprietaryName>Octreotide Acetate</ProprietaryName><NonProprietaryName>Octreotide Acetate</NonProprietaryName></NDC><NDC><NDCCode>0597-9257-59</NDCCode><ProprietaryName>Hernexeos</ProprietaryName><NonProprietaryName>Zongertinib</NonProprietaryName></NDC><NDC><NDCCode>0597-9257-86</NDCCode><ProprietaryName>Hernexeos</ProprietaryName><NonProprietaryName>Zongertinib</NonProprietaryName></NDC></NDCList>