{
"NDC": [
{
"NDCCode": "0641-6118-01",
"PackageDescription": "100 mL in 1 VIAL, PHARMACY BULK PACKAGE (0641-6118-01) ",
"NDC11Code": "00641-6118-01",
"ProductNDC": "0641-6118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20091203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065403",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "100; 50",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091203",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section) FURTHER DILUTION IS REQUIRED BEFORE USE."
},
{
"NDCCode": "50090-6118-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-6118-1) ",
"NDC11Code": "50090-6118-01",
"ProductNDC": "50090-6118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212399",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220930",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium may induce hyperthyroidism [see Warnings and Precautions(5.1)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4N NaO 4 H 2O, molecular weight of 798.86 (anhydrous), and structural formula as shown:. Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Levothyroxine sodium tablets, USP meets USP Dissolution Test 7."
},
{
"NDCCode": "54569-6118-1",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54569-6118-1)",
"NDC11Code": "54569-6118-01",
"ProductNDC": "54569-6118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zaleplon",
"NonProprietaryName": "Zaleplon",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077239",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "ZALEPLON",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid A Receptor Agonist [EPC],GABA A Agonists [MoA],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55882-6118-1",
"PackageDescription": "473 mL in 1 BOTTLE (55882-6118-1) ",
"NDC11Code": "55882-6118-01",
"ProductNDC": "55882-6118",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hello",
"ProprietaryNameSuffix": "Unicorn Splash Anticavity Fluoride Rinse",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "MOUTHWASH",
"RouteName": "DENTAL",
"StartMarketingDate": "20220103",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "Hello Products LLC",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": ".02",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220103",
"SamplePackage": "N"
},
{
"NDCCode": "0093-6118-16",
"PackageDescription": "1 BOTTLE in 1 CARTON (0093-6118-16) > 480 mL in 1 BOTTLE",
"NDC11Code": "00093-6118-16",
"ProductNDC": "0093-6118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19981211",
"EndMarketingDate": "20180228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089081",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-03-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0093-6118-87",
"PackageDescription": "1 BOTTLE in 1 CARTON (0093-6118-87) > 240 mL in 1 BOTTLE",
"NDC11Code": "00093-6118-87",
"ProductNDC": "0093-6118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19981211",
"EndMarketingDate": "20180228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089081",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-0641-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0378-0641-01) ",
"NDC11Code": "00378-0641-01",
"ProductNDC": "0378-0641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088832",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190403",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol."
},
{
"NDCCode": "0641-6000-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6000-10) / 10 mL in 1 VIAL (0641-6000-01) ",
"NDC11Code": "00641-6000-10",
"ProductNDC": "0641-6000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N",
"IndicationAndUsage": "ATIVAN Injection is indicated for the treatment of status epilepticus.",
"Description": "Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative."
},
{
"NDCCode": "0641-6001-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6001-25) / 1 mL in 1 VIAL (0641-6001-01) ",
"NDC11Code": "00641-6001-25",
"ProductNDC": "0641-6001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N",
"IndicationAndUsage": "ATIVAN Injection is indicated for the treatment of status epilepticus.",
"Description": "Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative."
},
{
"NDCCode": "0641-6002-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6002-10) / 10 mL in 1 VIAL (0641-6002-01) ",
"NDC11Code": "00641-6002-10",
"ProductNDC": "0641-6002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N",
"IndicationAndUsage": "ATIVAN Injection is indicated for the treatment of status epilepticus.",
"Description": "Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative."
},
{
"NDCCode": "0641-6003-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6003-25) / 1 mL in 1 VIAL (0641-6003-01) ",
"NDC11Code": "00641-6003-25",
"ProductNDC": "0641-6003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N",
"IndicationAndUsage": "ATIVAN Injection is indicated for the treatment of status epilepticus.",
"Description": "Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative."
},
{
"NDCCode": "0641-6006-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) ",
"NDC11Code": "00641-6006-10",
"ProductNDC": "0641-6006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19710101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19710101",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.",
"Description": "Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is."
},
{
"NDCCode": "0641-6007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0641-6007-10) / 10 mL in 1 VIAL, MULTI-DOSE (0641-6007-01) ",
"NDC11Code": "00641-6007-10",
"ProductNDC": "0641-6007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079196",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080430",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "0641-6008-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0641-6008-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0641-6008-01) ",
"NDC11Code": "00641-6008-10",
"ProductNDC": "0641-6008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079196",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080430",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "0641-6013-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6013-10) / 5 mL in 1 VIAL (0641-6013-01) ",
"NDC11Code": "00641-6013-10",
"ProductNDC": "0641-6013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6014-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6014-10) / 10 mL in 1 VIAL (0641-6014-01) ",
"NDC11Code": "00641-6014-10",
"ProductNDC": "0641-6014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6015-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6015-10) / 25 mL in 1 VIAL (0641-6015-01) ",
"NDC11Code": "00641-6015-10",
"ProductNDC": "0641-6015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6018-01",
"PackageDescription": "20 mL in 1 VIAL (0641-6018-01) ",
"NDC11Code": "00641-6018-01",
"ProductNDC": "0641-6018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopram",
"NonProprietaryName": "Doxapram Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19650623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA014879",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DOXAPRAM HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650623",
"SamplePackage": "N",
"IndicationAndUsage": "When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).",
"Description": "DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98."
},
{
"NDCCode": "0641-6018-06",
"PackageDescription": "6 VIAL in 1 CARTON (0641-6018-06) / 20 mL in 1 VIAL (0641-6018-01) ",
"NDC11Code": "00641-6018-06",
"ProductNDC": "0641-6018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopram",
"NonProprietaryName": "Doxapram Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19650623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA014879",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DOXAPRAM HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650623",
"SamplePackage": "N",
"IndicationAndUsage": "When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).",
"Description": "DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98."
},
{
"NDCCode": "0641-6019-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6019-10) / 10 mL in 1 AMPULE (0641-6019-01) ",
"NDC11Code": "00641-6019-10",
"ProductNDC": "0641-6019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duramorph",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.",
"Description": "DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6020-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6020-10) / 10 mL in 1 AMPULE (0641-6020-01) ",
"NDC11Code": "00641-6020-10",
"ProductNDC": "0641-6020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duramorph",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.",
"Description": "DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6021-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) ",
"NDC11Code": "00641-6021-10",
"ProductNDC": "0641-6021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010416",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6022-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6022-25) / 2 mL in 1 VIAL (0641-6022-01) ",
"NDC11Code": "00641-6022-25",
"ProductNDC": "0641-6022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075486",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010416",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6023-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6023-10) / 4 mL in 1 VIAL (0641-6023-01) ",
"NDC11Code": "00641-6023-10",
"ProductNDC": "0641-6023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230516",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6023-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6023-25) / 4 mL in 1 VIAL (0641-6023-01) ",
"NDC11Code": "00641-6023-25",
"ProductNDC": "0641-6023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010416",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6024-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6024-10) / 2 mL in 1 AMPULE (0641-6024-01) ",
"NDC11Code": "00641-6024-10",
"ProductNDC": "0641-6024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6025-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6025-10) / 5 mL in 1 AMPULE (0641-6025-01) ",
"NDC11Code": "00641-6025-10",
"ProductNDC": "0641-6025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6026-05",
"PackageDescription": "5 AMPULE in 1 CARTON (0641-6026-05) / 20 mL in 1 AMPULE (0641-6026-01) ",
"NDC11Code": "00641-6026-05",
"ProductNDC": "0641-6026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6027-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6027-25) / 2 mL in 1 VIAL (0641-6027-01) ",
"NDC11Code": "00641-6027-25",
"ProductNDC": "0641-6027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6028-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6028-10) / 5 mL in 1 VIAL (0641-6028-01) ",
"NDC11Code": "00641-6028-10",
"ProductNDC": "0641-6028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230606",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0641-6118-01</NDCCode>
<PackageDescription>100 mL in 1 VIAL, PHARMACY BULK PACKAGE (0641-6118-01) </PackageDescription>
<NDC11Code>00641-6118-01</NDC11Code>
<ProductNDC>0641-6118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20091203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065403</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section) FURTHER DILUTION IS REQUIRED BEFORE USE.</Description>
</NDC>
<NDC>
<NDCCode>50090-6118-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-6118-1) </PackageDescription>
<NDC11Code>50090-6118-01</NDC11Code>
<ProductNDC>50090-6118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212399</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium may induce hyperthyroidism [see Warnings and Precautions(5.1)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4N NaO 4 H 2O, molecular weight of 798.86 (anhydrous), and structural formula as shown:. Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Levothyroxine sodium tablets, USP meets USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>54569-6118-1</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54569-6118-1)</PackageDescription>
<NDC11Code>54569-6118-01</NDC11Code>
<ProductNDC>54569-6118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zaleplon</ProprietaryName>
<NonProprietaryName>Zaleplon</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077239</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>ZALEPLON</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid A Receptor Agonist [EPC],GABA A Agonists [MoA],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55882-6118-1</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (55882-6118-1) </PackageDescription>
<NDC11Code>55882-6118-01</NDC11Code>
<ProductNDC>55882-6118</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hello</ProprietaryName>
<ProprietaryNameSuffix>Unicorn Splash Anticavity Fluoride Rinse</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>MOUTHWASH</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20220103</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>Hello Products LLC</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>.02</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0093-6118-16</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0093-6118-16) > 480 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00093-6118-16</NDC11Code>
<ProductNDC>0093-6118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981211</StartMarketingDate>
<EndMarketingDate>20180228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089081</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0093-6118-87</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0093-6118-87) > 240 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00093-6118-87</NDC11Code>
<ProductNDC>0093-6118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981211</StartMarketingDate>
<EndMarketingDate>20180228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089081</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-0641-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0378-0641-01) </PackageDescription>
<NDC11Code>00378-0641-01</NDC11Code>
<ProductNDC>0378-0641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088832</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
</NDC>
<NDC>
<NDCCode>0641-6000-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6000-10) / 10 mL in 1 VIAL (0641-6000-01) </PackageDescription>
<NDC11Code>00641-6000-10</NDC11Code>
<ProductNDC>0641-6000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6001-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6001-25) / 1 mL in 1 VIAL (0641-6001-01) </PackageDescription>
<NDC11Code>00641-6001-25</NDC11Code>
<ProductNDC>0641-6001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6002-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6002-10) / 10 mL in 1 VIAL (0641-6002-01) </PackageDescription>
<NDC11Code>00641-6002-10</NDC11Code>
<ProductNDC>0641-6002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6003-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6003-25) / 1 mL in 1 VIAL (0641-6003-01) </PackageDescription>
<NDC11Code>00641-6003-25</NDC11Code>
<ProductNDC>0641-6003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6006-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) </PackageDescription>
<NDC11Code>00641-6006-10</NDC11Code>
<ProductNDC>0641-6006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19710101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0641-6007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0641-6007-10) / 10 mL in 1 VIAL, MULTI-DOSE (0641-6007-01) </PackageDescription>
<NDC11Code>00641-6007-10</NDC11Code>
<ProductNDC>0641-6007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079196</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>0641-6008-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0641-6008-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0641-6008-01) </PackageDescription>
<NDC11Code>00641-6008-10</NDC11Code>
<ProductNDC>0641-6008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079196</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>0641-6013-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6013-10) / 5 mL in 1 VIAL (0641-6013-01) </PackageDescription>
<NDC11Code>00641-6013-10</NDC11Code>
<ProductNDC>0641-6013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6014-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6014-10) / 10 mL in 1 VIAL (0641-6014-01) </PackageDescription>
<NDC11Code>00641-6014-10</NDC11Code>
<ProductNDC>0641-6014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6015-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6015-10) / 25 mL in 1 VIAL (0641-6015-01) </PackageDescription>
<NDC11Code>00641-6015-10</NDC11Code>
<ProductNDC>0641-6015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6018-01</NDCCode>
<PackageDescription>20 mL in 1 VIAL (0641-6018-01) </PackageDescription>
<NDC11Code>00641-6018-01</NDC11Code>
<ProductNDC>0641-6018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopram</ProprietaryName>
<NonProprietaryName>Doxapram Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19650623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA014879</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXAPRAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).</IndicationAndUsage>
<Description>DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98.</Description>
</NDC>
<NDC>
<NDCCode>0641-6018-06</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (0641-6018-06) / 20 mL in 1 VIAL (0641-6018-01) </PackageDescription>
<NDC11Code>00641-6018-06</NDC11Code>
<ProductNDC>0641-6018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopram</ProprietaryName>
<NonProprietaryName>Doxapram Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19650623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA014879</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXAPRAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).</IndicationAndUsage>
<Description>DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98.</Description>
</NDC>
<NDC>
<NDCCode>0641-6019-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6019-10) / 10 mL in 1 AMPULE (0641-6019-01) </PackageDescription>
<NDC11Code>00641-6019-10</NDC11Code>
<ProductNDC>0641-6019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duramorph</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
<Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6020-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6020-10) / 10 mL in 1 AMPULE (0641-6020-01) </PackageDescription>
<NDC11Code>00641-6020-10</NDC11Code>
<ProductNDC>0641-6020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duramorph</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
<Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6021-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) </PackageDescription>
<NDC11Code>00641-6021-10</NDC11Code>
<ProductNDC>0641-6021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6022-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6022-25) / 2 mL in 1 VIAL (0641-6022-01) </PackageDescription>
<NDC11Code>00641-6022-25</NDC11Code>
<ProductNDC>0641-6022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075486</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6023-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6023-10) / 4 mL in 1 VIAL (0641-6023-01) </PackageDescription>
<NDC11Code>00641-6023-10</NDC11Code>
<ProductNDC>0641-6023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230516</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6023-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6023-25) / 4 mL in 1 VIAL (0641-6023-01) </PackageDescription>
<NDC11Code>00641-6023-25</NDC11Code>
<ProductNDC>0641-6023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6024-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6024-10) / 2 mL in 1 AMPULE (0641-6024-01) </PackageDescription>
<NDC11Code>00641-6024-10</NDC11Code>
<ProductNDC>0641-6024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6025-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6025-10) / 5 mL in 1 AMPULE (0641-6025-01) </PackageDescription>
<NDC11Code>00641-6025-10</NDC11Code>
<ProductNDC>0641-6025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6026-05</NDCCode>
<PackageDescription>5 AMPULE in 1 CARTON (0641-6026-05) / 20 mL in 1 AMPULE (0641-6026-01) </PackageDescription>
<NDC11Code>00641-6026-05</NDC11Code>
<ProductNDC>0641-6026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6027-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6027-25) / 2 mL in 1 VIAL (0641-6027-01) </PackageDescription>
<NDC11Code>00641-6027-25</NDC11Code>
<ProductNDC>0641-6027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6028-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6028-10) / 5 mL in 1 VIAL (0641-6028-01) </PackageDescription>
<NDC11Code>00641-6028-10</NDC11Code>
<ProductNDC>0641-6028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
</NDCList>