RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>0641-6123-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6123-10)  &gt; 8 mL in 1 VIAL (0641-6123-01) </PackageDescription>
    <NDC11Code>00641-6123-10</NDC11Code>
    <ProductNDC>0641-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091222</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065406</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>250; 125</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibiotic. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibiotic ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colourless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>0067-6123-30</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (0067-6123-30)  &gt; 10 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00067-6123-30</NDC11Code>
    <ProductNDC>0067-6123</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Family Dollar Allergy Relief</ProprietaryName>
    <NonProprietaryName>Loratadine 10 Mg</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040930</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021375</ApplicationNumber>
    <LabelerName>Novartis Consumer Health, Inc.</LabelerName>
    <SubstanceName>LORATADINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-01-24</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0268-6123-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL (0268-6123-10) </PackageDescription>
    <NDC11Code>00268-6123-10</NDC11Code>
    <ProductNDC>0268-6123</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Cinnamon</ProprietaryName>
    <NonProprietaryName>Cinnamomum Verum</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS</RouteName>
    <StartMarketingDate>19980223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103753</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>CINNAMON</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Food Additives [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These products are for diagnostic use only. Diagnostic allergenic extracts are indicated for use in skin testing to establish the clinical relevance of specific allergens to which the patient has been exposed. By measuring skin test response, the physician may assess the degree of sensitivity that patients have to the allergens. For extracts standardized in AU and BAU, see individual directions for use. Allergenic extracts for diagnostic use only of coffee, mosquito, cottonseed, and flaxseed have not been shown by adequate data to be safe and effective for therapeutic use.</IndicationAndUsage>
    <Description>Sterile diagnostic extracts are supplied in either phenol-saline diluent for Intradermal Testing or in diluent containing glycerin 50% (v/v) for Percutaneous Testing and phenol 0.4% (preservative). Inactive ingredients may include: sodium chloride for isotonicity, glycerin, and sodium bicarbonate as a buffer. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and after final packaging, they are tested for sterility and safety. Molds are individwually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds (fungi) are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Foods, miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline or glycerin, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
  </NDC>
  <NDC>
    <NDCCode>0268-6123-06</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (0268-6123-06) </PackageDescription>
    <NDC11Code>00268-6123-06</NDC11Code>
    <ProductNDC>0268-6123</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Cinnamon</ProprietaryName>
    <NonProprietaryName>Cinnamomum Verum</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS</RouteName>
    <StartMarketingDate>19980223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103753</ApplicationNumber>
    <LabelerName>ALK-Abello, Inc.</LabelerName>
    <SubstanceName>CINNAMON</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Food Additives [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These products are for diagnostic use only. Diagnostic allergenic extracts are indicated for use in skin testing to establish the clinical relevance of specific allergens to which the patient has been exposed. By measuring skin test response, the physician may assess the degree of sensitivity that patients have to the allergens. For extracts standardized in AU and BAU, see individual directions for use. Allergenic extracts for diagnostic use only of coffee, mosquito, cottonseed, and flaxseed have not been shown by adequate data to be safe and effective for therapeutic use.</IndicationAndUsage>
    <Description>Sterile diagnostic extracts are supplied in either phenol-saline diluent for Intradermal Testing or in diluent containing glycerin 50% (v/v) for Percutaneous Testing and phenol 0.4% (preservative). Inactive ingredients may include: sodium chloride for isotonicity, glycerin, and sodium bicarbonate as a buffer. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and after final packaging, they are tested for sterility and safety. Molds are individwually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds (fungi) are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Foods, miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline or glycerin, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6123-61</NDCCode>
    <PackageDescription>100 TABLET in 1 BOX, UNIT-DOSE (0904-6123-61)</PackageDescription>
    <NDC11Code>00904-6123-61</NDC11Code>
    <ProductNDC>0904-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100111</StartMarketingDate>
    <EndMarketingDate>20151006</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074305</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2015-11-18</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>50090-6123-0</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE (50090-6123-0) </PackageDescription>
    <NDC11Code>50090-6123-00</NDC11Code>
    <ProductNDC>50090-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200624</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213386</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasiaHypercalcemia associated with cancerNonsuppurative thyroiditis2. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis3. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis4. Dermatologic DiseasesPemphigus Bullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis5. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitisSerum sicknessDrug hypersensitivity reactions6. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: Allergic corneal marginal ulcers Herpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis7. Respiratory DiseasesSymptomatic sarcoidosis Loeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis8. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia9. Neoplastic DiseasesFor palliative management of: Leukemias and lymphomas in adultsAcute leukemia of childhood10. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus11. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: Ulcerative colitisRegional enteritis12. Nervous SystemAcute exacerbations of multiple sclerosis13. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapyTrichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C21H26O5 and its molecular weight is 358.4 g/mole. The structural formula is represented below. Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-6123-1</NDCCode>
    <PackageDescription>12 TABLET in 1 BOTTLE (50090-6123-1) </PackageDescription>
    <NDC11Code>50090-6123-01</NDC11Code>
    <ProductNDC>50090-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200624</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213386</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasiaHypercalcemia associated with cancerNonsuppurative thyroiditis2. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis3. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis4. Dermatologic DiseasesPemphigus Bullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis5. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitisSerum sicknessDrug hypersensitivity reactions6. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: Allergic corneal marginal ulcers Herpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis7. Respiratory DiseasesSymptomatic sarcoidosis Loeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis8. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia9. Neoplastic DiseasesFor palliative management of: Leukemias and lymphomas in adultsAcute leukemia of childhood10. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus11. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: Ulcerative colitisRegional enteritis12. Nervous SystemAcute exacerbations of multiple sclerosis13. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapyTrichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C21H26O5 and its molecular weight is 358.4 g/mole. The structural formula is represented below. Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-6123-2</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (50090-6123-2) </PackageDescription>
    <NDC11Code>50090-6123-02</NDC11Code>
    <ProductNDC>50090-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200624</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213386</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasiaHypercalcemia associated with cancerNonsuppurative thyroiditis2. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis3. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis4. Dermatologic DiseasesPemphigus Bullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis5. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitisSerum sicknessDrug hypersensitivity reactions6. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: Allergic corneal marginal ulcers Herpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis7. Respiratory DiseasesSymptomatic sarcoidosis Loeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis8. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia9. Neoplastic DiseasesFor palliative management of: Leukemias and lymphomas in adultsAcute leukemia of childhood10. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus11. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: Ulcerative colitisRegional enteritis12. Nervous SystemAcute exacerbations of multiple sclerosis13. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapyTrichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C21H26O5 and its molecular weight is 358.4 g/mole. The structural formula is represented below. Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-6123-5</NDCCode>
    <PackageDescription>14 TABLET in 1 BOTTLE (50090-6123-5) </PackageDescription>
    <NDC11Code>50090-6123-05</NDC11Code>
    <ProductNDC>50090-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200624</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213386</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasiaHypercalcemia associated with cancerNonsuppurative thyroiditis2. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis3. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis4. Dermatologic DiseasesPemphigus Bullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis5. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitisSerum sicknessDrug hypersensitivity reactions6. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: Allergic corneal marginal ulcers Herpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis7. Respiratory DiseasesSymptomatic sarcoidosis Loeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis8. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia9. Neoplastic DiseasesFor palliative management of: Leukemias and lymphomas in adultsAcute leukemia of childhood10. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus11. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: Ulcerative colitisRegional enteritis12. Nervous SystemAcute exacerbations of multiple sclerosis13. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapyTrichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C21H26O5 and its molecular weight is 358.4 g/mole. The structural formula is represented below. Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-6123-7</NDCCode>
    <PackageDescription>15 TABLET in 1 BOTTLE (50090-6123-7) </PackageDescription>
    <NDC11Code>50090-6123-07</NDC11Code>
    <ProductNDC>50090-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200624</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213386</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasiaHypercalcemia associated with cancerNonsuppurative thyroiditis2. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis3. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis4. Dermatologic DiseasesPemphigus Bullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis5. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitisSerum sicknessDrug hypersensitivity reactions6. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: Allergic corneal marginal ulcers Herpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis7. Respiratory DiseasesSymptomatic sarcoidosis Loeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis8. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia9. Neoplastic DiseasesFor palliative management of: Leukemias and lymphomas in adultsAcute leukemia of childhood10. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus11. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: Ulcerative colitisRegional enteritis12. Nervous SystemAcute exacerbations of multiple sclerosis13. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapyTrichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C21H26O5 and its molecular weight is 358.4 g/mole. The structural formula is represented below. Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-6123-0</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (54868-6123-0)</PackageDescription>
    <NDC11Code>54868-6123-00</NDC11Code>
    <ProductNDC>54868-6123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Exforge Hct</ProprietaryName>
    <NonProprietaryName>Amlodipine Valsartan And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100514</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022314</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>10; 320; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient],Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Exforge HCT (amlodipine, valsartan, hydrochlorothiazide) is indicated for the treatment of hypertension. This fixed combination drug is not indicated for the initial therapy of hypertension [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>Exforge HCT is a fixed combination of amlodipine, valsartan and hydrochlorothiazide. Exforge HCT contains the besylate salt of amlodipine, a dihydropyridine calcium channel blocker (CCB). Amlodipine besylate, USP is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate ; its structural formula is. Its empirical formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine; its structural formula is. Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7- sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Exforge HCT film-coated tablets are formulated in five strengths for oral administration with a combination of amlodipine besylate, valsartan and hydrochlorothiazide, providing for the following available combinations: 5/160/12.5 mg, 10/160/12.5 mg, 5/160/25 mg, 10/160/25 mg and 10/320/25 mg amlodipine besylate/valsartan/hydrochlorothiazide. The inactive ingredients for all strengths of the tablets include microcrystalline cellulose; crospovidone; colloidal anhydrous silica; magnesium stearate; hypromellose, macrogol 4000 and talc. Additionally, the 5/160/12.5 mg strength contains titanium dioxide; the 10/160/12.5 mg strength contains titanium dioxide and yellow and red iron oxides; the 5/160/25 mg strength contains titanium dioxide and yellow iron oxide and the 10/160/25 mg and 10/320/25 mg strengths both contain yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>0363-0641-09</NDCCode>
    <PackageDescription>1 TUBE in 1 PACKAGE (0363-0641-09)  / 25.5 g in 1 TUBE (0363-0641-10) </PackageDescription>
    <NDC11Code>00363-0641-09</NDC11Code>
    <ProductNDC>0363-0641</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hemorrhoidal Cream</ProprietaryName>
    <NonProprietaryName>Hemorrhoidal Cream</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180325</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M015</ApplicationNumber>
    <LabelerName>Walgreens</LabelerName>
    <SubstanceName>PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150; 144; 10; 2.5</StrengthNumber>
    <StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Allergens [CS], Cell-mediated Immunity [PE], Glycerol [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Chemical Allergen [EPC], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180325</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>-for temporary relief of pain, soreness, and burning. -helps relieve the local itching and discomfort associated with hemorrhoids. -temporarily shrinks hemorrhoidal tissue. -temporarily provides a coating for relief of anorectal discomforts. -temporarily protects the inflamed, irritated anorectal surface to help make bowel movements less painful.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0363-0641-10</NDCCode>
    <PackageDescription>1 TUBE in 1 PACKAGE (0363-0641-10)  &gt; 25.5 g in 1 TUBE (0363-0641-09) </PackageDescription>
    <NDC11Code>00363-0641-10</NDC11Code>
    <ProductNDC>0363-0641</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hemorrhoidal Cream</ProprietaryName>
    <NonProprietaryName>Hemorrhoidal Cream</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180325</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part348</ApplicationNumber>
    <LabelerName>Walgreens</LabelerName>
    <SubstanceName>PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15; 14.4; 1; .25</StrengthNumber>
    <StrengthUnit>g/100g; g/100g; g/100g; g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180325</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0378-0641-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (0378-0641-10) </PackageDescription>
    <NDC11Code>00378-0641-10</NDC11Code>
    <ProductNDC>0378-0641</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190403</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088832</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190403</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions.</IndicationAndUsage>
    <Description>Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-1512-36</NDCCode>
    <PackageDescription>100 AMPULE in 1 CARTON (0641-1512-36)  &gt; 10 mL in 1 AMPULE (0641-1512-10) </PackageDescription>
    <NDC11Code>00641-1512-36</NDC11Code>
    <ProductNDC>0641-1512</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20120120</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201850</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>This parenteral preparation indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
    <Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. Its chloride and sodium ion concentrations are approximately 0.154 mEq of each per milliliter and its calculated osmolality is 0.308 milliosmols per mL. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment, pH 5.3 (4.5 to 7.0). Sodium chloride, USP occurs as colorless cubic crystals or white crystalline powder and has a saline taste. Sodium chloride is freely soluble in water. The empirical formula for sodium chloride is NaCl, and the molecular weight is 58.44. The ampul is a colorless sealed sterile glass container.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-2460-55</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 PACKAGE (0641-2460-55)  / 10 mL in 1 VIAL, MULTI-DOSE (0641-2460-30) </PackageDescription>
    <NDC11Code>00641-2460-55</NDC11Code>
    <ProductNDC>0641-2460</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720322</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA017037</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19720322</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations/mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. Heparin Sodium Injection, USP, preservative-free is available in the following concentrations. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-2555-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-2555-10)  / 5 mL in 1 VIAL (0641-2555-41) </PackageDescription>
    <NDC11Code>00641-2555-10</NDC11Code>
    <ProductNDC>0641-2555</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenytoin Sodium</ProprietaryName>
    <NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19750716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084307</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>PHENYTOIN SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral Phenytoin Sodium Injection is indicated for the treatment of generalized tonic-clonic status epilepticus, and prevention and treatment of seizures occurring during neurosurgery. Intravenous phenytoin can also be substituted, as short-term use, for oral phenytoin. Parenteral phenytoin should be used only when oral phenytoin administration is not possible [see Dosage and Administration (2.1, 2.3) and Warnings and Precautions (5.1)].</IndicationAndUsage>
    <Description>Phenytoin Sodium Injection, USP is a sterile solution containing in each mL phenytoin sodium 50 mg, propylene glycol 0.4 mL and alcohol 0.1 mL in Water for Injection. pH 10.0-12.3; sodium hydroxide added, if needed, for pH adjustment. Phenytoin sodium is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione represented by the following structural formula. C15H11N2NaO2           MW 274.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-2569-44</NDCCode>
    <PackageDescription>5 VIAL in 1 CARTON (0641-2569-44)  / 10 mL in 1 VIAL (0641-2569-41) </PackageDescription>
    <NDC11Code>00641-2569-44</NDC11Code>
    <ProductNDC>0641-2569</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dipyridamole</ProprietaryName>
    <NonProprietaryName>Dipyridamole</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19961018</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074521</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DIPYRIDAMOLE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961018</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dipyridamole Injection is indicated as an alternative to exercise in thallium myocardial perfusion imaging for the evaluation of coronary artery disease in patients who cannot exercise adequately. In a study of about 1100 patients who underwent coronary arteriography and Dipyridamole Injection assisted thallium imaging, the results of both tests were interpreted blindly and the sensitivity and specificity of the dipyridamole thallium study in predicting the angiographic outcome were calculated. The sensitivity of the dipyridamole test (true positive dipyridamole divided by the total number of patients with positive angiography) was about 85%. The specificity (true negative divided by the number of patients with negative angiograms) was about 50%. In a subset of patients who had exercise thallium imaging as well as dipyridamole thallium imaging, sensitivity and specificity of the two tests were almost identical.</IndicationAndUsage>
    <Description>Dipyridamole is a coronary vasodilator described as 2,2',2'',2'''-[(4,8 Dipiperidinopyrimido[ 5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. The structural formula is.  C24H40N8O4                                     MW 504.63. Dipyridamole Injection, USP is a sterile, odorless, pale yellow liquid which can be diluted in sodium chloride injection or dextrose injection for intravenous administration. Each mL contains 5 mg dipyridamole, USP, 50 mg polyethylene glycol 600 and 2 mg tartaric acid in Water for Injection, USP. pH 2.2-3.2; hydrochloric acid added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-2965-45</NDCCode>
    <PackageDescription>25 VIAL in 1 BOX (0641-2965-45)  &gt; 10 mL in 1 VIAL (0641-2965-41)</PackageDescription>
    <NDC11Code>00641-2965-45</NDC11Code>
    <ProductNDC>0641-2965</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esmolol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Esmolol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19861231</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019386</ApplicationNumber>
    <LabelerName>West Ward Pharmaceutical Corporation</LabelerName>
    <SubstanceName>ESMOLOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Esmolol hydrochloride is indicated for the rapid control of ventricular rate in patients with atrial fibrillation or atrial flutter in perioperative, postoperative, or other emergent circumstances where short term control of ventricular rate with a short-acting agent is desirable. Esmolol hydrochloride is also indicated in noncompensatory sinus tachycardia where, in the physician’s judgment, the rapid heart rate requires specific intervention. Esmolol hydrochloride is not intended for use in chronic settings where transfer to another agent is anticipated.</IndicationAndUsage>
    <Description>Esmolol hydrochloride is a beta1-selective (cardioselective) adrenergic receptor blocking agent with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol Hydrochloride is. (±)-Methyl p- [2-hydroxy-3- (isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure. Esmolol hydrochloride has the empirical formula C16H26NO4Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6000-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6000-10)  / 10 mL in 1 VIAL (0641-6000-01) </PackageDescription>
    <NDC11Code>00641-6000-10</NDC11Code>
    <ProductNDC>0641-6000</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ativan</ProprietaryName>
    <NonProprietaryName>Lorazepam</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19800725</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018140</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LORAZEPAM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-09-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19800725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
    <Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6002-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6002-10)  / 10 mL in 1 VIAL (0641-6002-01) </PackageDescription>
    <NDC11Code>00641-6002-10</NDC11Code>
    <ProductNDC>0641-6002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ativan</ProprietaryName>
    <NonProprietaryName>Lorazepam</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19800725</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018140</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LORAZEPAM</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-09-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19800725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ATIVAN Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
    <Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2.0 or 4.0 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2.0% benzyl alcohol as preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6006-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6006-10)  / 20 mL in 1 VIAL (0641-6006-01) </PackageDescription>
    <NDC11Code>00641-6006-10</NDC11Code>
    <ProductNDC>0641-6006</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atropine Sulfate</ProprietaryName>
    <NonProprietaryName>Atropine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19710101</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ATROPINE SULFATE</SubstanceName>
    <StrengthNumber>.4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.</IndicationAndUsage>
    <Description>Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6007-10</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0641-6007-10)  / 10 mL in 1 VIAL, MULTI-DOSE (0641-6007-01) </PackageDescription>
    <NDC11Code>00641-6007-10</NDC11Code>
    <ProductNDC>0641-6007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumetanide</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20080430</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079196</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080430</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S      Molecular weight: 364.42.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6008-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0641-6008-10)  / 4 mL in 1 VIAL, SINGLE-DOSE (0641-6008-01) </PackageDescription>
    <NDC11Code>00641-6008-10</NDC11Code>
    <ProductNDC>0641-6008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumetanide</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20080430</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079196</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080430</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S      Molecular weight: 364.42.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6013-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6013-10)  / 5 mL in 1 VIAL (0641-6013-01) </PackageDescription>
    <NDC11Code>00641-6013-10</NDC11Code>
    <ProductNDC>0641-6013</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
    <NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20081217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078538</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20081217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
    <Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl                     MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6014-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6014-10)  / 10 mL in 1 VIAL (0641-6014-01) </PackageDescription>
    <NDC11Code>00641-6014-10</NDC11Code>
    <ProductNDC>0641-6014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
    <NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20081217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078538</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20081217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
    <Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl                     MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6015-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6015-10)  / 25 mL in 1 VIAL (0641-6015-01) </PackageDescription>
    <NDC11Code>00641-6015-10</NDC11Code>
    <ProductNDC>0641-6015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
    <NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20081217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078538</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20081217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
    <Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl                     MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6019-10</NDCCode>
    <PackageDescription>10 AMPULE in 1 CARTON (0641-6019-10)  / 10 mL in 1 AMPULE (0641-6019-01) </PackageDescription>
    <NDC11Code>00641-6019-10</NDC11Code>
    <ProductNDC>0641-6019</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duramorph</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
    <StartMarketingDate>19840918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018565</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19840918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
    <Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula.  (C17H19NO3)2  H2SO4  5H2O                                         Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6020-10</NDCCode>
    <PackageDescription>10 AMPULE in 1 CARTON (0641-6020-10)  / 10 mL in 1 AMPULE (0641-6020-01) </PackageDescription>
    <NDC11Code>00641-6020-10</NDC11Code>
    <ProductNDC>0641-6020</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duramorph</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
    <StartMarketingDate>19840918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018565</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19840918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
    <Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula.  (C17H19NO3)2  H2SO4  5H2O                                         Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
  </NDC>
  <NDC>
    <NDCCode>0641-6021-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0641-6021-10)  / 20 mL in 1 VIAL (0641-6021-01) </PackageDescription>
    <NDC11Code>00641-6021-10</NDC11Code>
    <ProductNDC>0641-6021</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Famotidine</ProprietaryName>
    <NonProprietaryName>Famotidine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20010416</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075488</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>FAMOTIDINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010416</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
    <Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3      MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
  </NDC>
</NDCList>