{
"NDC": [
{
"NDCCode": "0641-6188-10",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (0641-6188-10) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (0641-6188-01) ",
"NDC11Code": "00641-6188-10",
"ProductNDC": "0641-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190619",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203826",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190619",
"SamplePackage": "N",
"IndicationAndUsage": "IMMPHENTIV injection 100 mcg/mL is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia. Phenylephrine Hydrochloride Injection 10 mg/mL is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the settings of anesthesia and septic shock.",
"Description": "Phenylephrine Hydrochloride Injection and IMMPHENTIV® injection contain active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Phenylephrine hydrochloride chemical name is (-)-m-Hydroxy-α [(methylamino)methyl]benzyl alcohol hydrochloride and has the following structural formula. Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. IMMPHENTIV® Injection, 100 mcg/mL. IMMPHENTIV®, USP, is a clear, colorless, aqueous solution that is essentially free of visible foreign matter, and Ready-To-Use formulation. Each mL contains: 100 mcg of Phenylephrine Hydrochloride USP (equivalent to 82 mcg of phenylephrine base), 7.5 mg of Sodium Chloride USP as tonicity agent; 4 mg of Sodium Citrate Dihydrate USP, and 1 mg of Citric Acid Monohydrate USP, as buffering agents, 0.2 mg of Edetate Disodium USP as chelating agent, and Sodium Hydroxide NF and Hydrochloric Acid NF as pH adjusters, in Water for Injection USP. IMMPHENTIV® injection pH range is 3.0 to 6.5. Phenylephrine Hydrochloride Injection, USP, 10 mg/mL. Phenylephrine Hydrochloride injection, USP is a clear, colorless, aqueous solution that is essentially free of visible foreign matter. It MUST BE DILUTED before administration as bolus intravenous infusion or continuous intravenous infusion. Each mL contains: 10 mg of Phenylephrine Hydrochloride (equivalent to 8.2 mg of phenylephrine base); 3.5 mg of Sodium Chloride USP as tonicity agent; 1 mg of Citric Acid Monohydrate USP and 4 mg of Sodium Citrate Dihydrate USP, as buffering agents; 2 mg of Sodium Metabisulfite USP, as antioxidant, and Sodium Hydroxide NF and Hydrochloric Acid NF, as pH adjusters in Water for Injection. Phenylephrine Hydrochloride injection pH range is 3.0 to 6.5."
},
{
"NDCCode": "55154-6188-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-6188-0) > 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-6188-00",
"ProductNDC": "55154-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20040428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076017",
"LabelerName": "Cardinal Health",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-03-30",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-6188-0",
"PackageDescription": "180 TABLET in 1 BOTTLE (50090-6188-0) ",
"NDC11Code": "50090-6188-00",
"ProductNDC": "50090-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078246",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221027",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide."
},
{
"NDCCode": "50090-6188-1",
"PackageDescription": "60 TABLET in 1 BOTTLE (50090-6188-1) ",
"NDC11Code": "50090-6188-01",
"ProductNDC": "50090-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078246",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221027",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide."
},
{
"NDCCode": "50090-6188-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-6188-3) ",
"NDC11Code": "50090-6188-03",
"ProductNDC": "50090-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078246",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221027",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide."
},
{
"NDCCode": "54569-6188-1",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (54569-6188-1)",
"NDC11Code": "54569-6188-01",
"ProductNDC": "54569-6188",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076201",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0363-0641-09",
"PackageDescription": "1 TUBE in 1 PACKAGE (0363-0641-09) / 25.5 g in 1 TUBE (0363-0641-10) ",
"NDC11Code": "00363-0641-09",
"ProductNDC": "0363-0641",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hemorrhoidal Cream",
"NonProprietaryName": "Hemorrhoidal Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180325",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M015",
"LabelerName": "Walgreens",
"SubstanceName": "PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "150; 144; 10; 2.5",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Allergens [CS], Cell-mediated Immunity [PE], Glycerol [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Chemical Allergen [EPC], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180325",
"SamplePackage": "N",
"IndicationAndUsage": "-for temporary relief of pain, soreness, and burning. -helps relieve the local itching and discomfort associated with hemorrhoids. -temporarily shrinks hemorrhoidal tissue. -temporarily provides a coating for relief of anorectal discomforts. -temporarily protects the inflamed, irritated anorectal surface to help make bowel movements less painful."
},
{
"NDCCode": "0363-0641-10",
"PackageDescription": "1 TUBE in 1 PACKAGE (0363-0641-10) > 25.5 g in 1 TUBE (0363-0641-09) ",
"NDC11Code": "00363-0641-10",
"ProductNDC": "0363-0641",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hemorrhoidal Cream",
"NonProprietaryName": "Hemorrhoidal Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180325",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Walgreens",
"SubstanceName": "PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "15; 14.4; 1; .25",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180325",
"SamplePackage": "N"
},
{
"NDCCode": "0378-0641-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (0378-0641-10) ",
"NDC11Code": "00378-0641-10",
"ProductNDC": "0378-0641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088832",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190403",
"SamplePackage": "N"
},
{
"NDCCode": "0641-1512-36",
"PackageDescription": "100 AMPULE in 1 CARTON (0641-1512-36) > 10 mL in 1 AMPULE (0641-1512-10) ",
"NDC11Code": "00641-1512-36",
"ProductNDC": "0641-1512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20120120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201850",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20120120",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. Its chloride and sodium ion concentrations are approximately 0.154 mEq of each per milliliter and its calculated osmolality is 0.308 milliosmols per mL. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment, pH 5.3 (4.5 to 7.0). Sodium chloride, USP occurs as colorless cubic crystals or white crystalline powder and has a saline taste. Sodium chloride is freely soluble in water. The empirical formula for sodium chloride is NaCl, and the molecular weight is 58.44. The ampul is a colorless sealed sterile glass container."
},
{
"NDCCode": "0641-2460-55",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 PACKAGE (0641-2460-55) / 10 mL in 1 VIAL, MULTI-DOSE (0641-2460-30) ",
"NDC11Code": "00641-2460-55",
"ProductNDC": "0641-2460",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720322",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017037",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19720322",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations/mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. Heparin Sodium Injection, USP, preservative-free is available in the following concentrations. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment."
},
{
"NDCCode": "0641-2555-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-2555-10) / 5 mL in 1 VIAL (0641-2555-41) ",
"NDC11Code": "00641-2555-10",
"ProductNDC": "0641-2555",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenytoin Sodium",
"NonProprietaryName": "Phenytoin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19750716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084307",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PHENYTOIN SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230921",
"SamplePackage": "N",
"IndicationAndUsage": "Parenteral Phenytoin Sodium Injection is indicated for the treatment of generalized tonic-clonic status epilepticus, and prevention and treatment of seizures occurring during neurosurgery. Intravenous phenytoin can also be substituted, as short-term use, for oral phenytoin. Parenteral phenytoin should be used only when oral phenytoin administration is not possible [see Dosage and Administration (2.1, 2.3) and Warnings and Precautions (5.1)].",
"Description": "Phenytoin Sodium Injection, USP is a sterile solution containing in each mL phenytoin sodium 50 mg, propylene glycol 0.4 mL and alcohol 0.1 mL in Water for Injection. pH 10.0-12.3; sodium hydroxide added, if needed, for pH adjustment. Phenytoin sodium is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione represented by the following structural formula. C15H11N2NaO2 MW 274.25."
},
{
"NDCCode": "0641-2569-44",
"PackageDescription": "5 VIAL in 1 CARTON (0641-2569-44) / 10 mL in 1 VIAL (0641-2569-41) ",
"NDC11Code": "00641-2569-44",
"ProductNDC": "0641-2569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19961018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074521",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19961018",
"SamplePackage": "N",
"IndicationAndUsage": "Dipyridamole Injection is indicated as an alternative to exercise in thallium myocardial perfusion imaging for the evaluation of coronary artery disease in patients who cannot exercise adequately. In a study of about 1100 patients who underwent coronary arteriography and Dipyridamole Injection assisted thallium imaging, the results of both tests were interpreted blindly and the sensitivity and specificity of the dipyridamole thallium study in predicting the angiographic outcome were calculated. The sensitivity of the dipyridamole test (true positive dipyridamole divided by the total number of patients with positive angiography) was about 85%. The specificity (true negative divided by the number of patients with negative angiograms) was about 50%. In a subset of patients who had exercise thallium imaging as well as dipyridamole thallium imaging, sensitivity and specificity of the two tests were almost identical.",
"Description": "Dipyridamole is a coronary vasodilator described as 2,2',2'',2'''-[(4,8 Dipiperidinopyrimido[ 5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. The structural formula is. C24H40N8O4 MW 504.63. Dipyridamole Injection, USP is a sterile, odorless, pale yellow liquid which can be diluted in sodium chloride injection or dextrose injection for intravenous administration. Each mL contains 5 mg dipyridamole, USP, 50 mg polyethylene glycol 600 and 2 mg tartaric acid in Water for Injection, USP. pH 2.2-3.2; hydrochloric acid added for pH adjustment."
},
{
"NDCCode": "0641-2965-45",
"PackageDescription": "25 VIAL in 1 BOX (0641-2965-45) > 10 mL in 1 VIAL (0641-2965-41)",
"NDC11Code": "00641-2965-45",
"ProductNDC": "0641-2965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esmolol Hydrochloride",
"NonProprietaryName": "Esmolol Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19861231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019386",
"LabelerName": "West Ward Pharmaceutical Corporation",
"SubstanceName": "ESMOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Esmolol hydrochloride is indicated for the rapid control of ventricular rate in patients with atrial fibrillation or atrial flutter in perioperative, postoperative, or other emergent circumstances where short term control of ventricular rate with a short-acting agent is desirable. Esmolol hydrochloride is also indicated in noncompensatory sinus tachycardia where, in the physician’s judgment, the rapid heart rate requires specific intervention. Esmolol hydrochloride is not intended for use in chronic settings where transfer to another agent is anticipated.",
"Description": "Esmolol hydrochloride is a beta1-selective (cardioselective) adrenergic receptor blocking agent with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol Hydrochloride is. (±)-Methyl p- [2-hydroxy-3- (isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure. Esmolol hydrochloride has the empirical formula C16H26NO4Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol."
},
{
"NDCCode": "0641-6000-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6000-10) / 10 mL in 1 VIAL (0641-6000-01) ",
"NDC11Code": "00641-6000-10",
"ProductNDC": "0641-6000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N"
},
{
"NDCCode": "0641-6002-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6002-10) / 10 mL in 1 VIAL (0641-6002-01) ",
"NDC11Code": "00641-6002-10",
"ProductNDC": "0641-6002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ativan",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19800725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018140",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19800725",
"SamplePackage": "N"
},
{
"NDCCode": "0641-6006-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) ",
"NDC11Code": "00641-6006-10",
"ProductNDC": "0641-6006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19710101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19710101",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.",
"Description": "Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is."
},
{
"NDCCode": "0641-6007-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0641-6007-10) / 10 mL in 1 VIAL, MULTI-DOSE (0641-6007-01) ",
"NDC11Code": "00641-6007-10",
"ProductNDC": "0641-6007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079196",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080430",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "0641-6008-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0641-6008-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0641-6008-01) ",
"NDC11Code": "00641-6008-10",
"ProductNDC": "0641-6008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079196",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080430",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "0641-6013-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6013-10) / 5 mL in 1 VIAL (0641-6013-01) ",
"NDC11Code": "00641-6013-10",
"ProductNDC": "0641-6013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6014-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6014-10) / 10 mL in 1 VIAL (0641-6014-01) ",
"NDC11Code": "00641-6014-10",
"ProductNDC": "0641-6014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6015-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6015-10) / 25 mL in 1 VIAL (0641-6015-01) ",
"NDC11Code": "00641-6015-10",
"ProductNDC": "0641-6015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078538",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081217",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Injection is indicated for the following.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH."
},
{
"NDCCode": "0641-6019-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6019-10) / 10 mL in 1 AMPULE (0641-6019-01) ",
"NDC11Code": "00641-6019-10",
"ProductNDC": "0641-6019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duramorph",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.",
"Description": "DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6020-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6020-10) / 10 mL in 1 AMPULE (0641-6020-01) ",
"NDC11Code": "00641-6020-10",
"ProductNDC": "0641-6020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duramorph",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.",
"Description": "DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6021-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) ",
"NDC11Code": "00641-6021-10",
"ProductNDC": "0641-6021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010416",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6023-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6023-10) / 4 mL in 1 VIAL (0641-6023-01) ",
"NDC11Code": "00641-6023-10",
"ProductNDC": "0641-6023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230516",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6024-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6024-10) / 2 mL in 1 AMPULE (0641-6024-01) ",
"NDC11Code": "00641-6024-10",
"ProductNDC": "0641-6024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6025-10",
"PackageDescription": "10 AMPULE in 1 CARTON (0641-6025-10) / 5 mL in 1 AMPULE (0641-6025-01) ",
"NDC11Code": "00641-6025-10",
"ProductNDC": "0641-6025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6028-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6028-10) / 5 mL in 1 VIAL (0641-6028-01) ",
"NDC11Code": "00641-6028-10",
"ProductNDC": "0641-6028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230606",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6031-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6031-10) > 5 mL in 1 VIAL (0641-6031-01)",
"NDC11Code": "00641-6031-10",
"ProductNDC": "0641-6031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flumazenil",
"NonProprietaryName": "Flumazenil",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20041012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076787",
"LabelerName": "West-ward Pharmaceutical Corp.",
"SubstanceName": "FLUMAZENIL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Flumazenil injection is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.",
"Description": "Flumazenil injection is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo [1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure and a calculated molecular weight of 303.29 and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol:buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to 3.5 – 4.5 with hydrochloric acid and/or, if necessary, sodium hydroxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0641-6188-10</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (0641-6188-10) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (0641-6188-01) </PackageDescription>
<NDC11Code>00641-6188-10</NDC11Code>
<ProductNDC>0641-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190619</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203826</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>IMMPHENTIV injection 100 mcg/mL is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia. Phenylephrine Hydrochloride Injection 10 mg/mL is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the settings of anesthesia and septic shock.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride Injection and IMMPHENTIV® injection contain active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Phenylephrine hydrochloride chemical name is (-)-m-Hydroxy-α [(methylamino)methyl]benzyl alcohol hydrochloride and has the following structural formula. Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. IMMPHENTIV® Injection, 100 mcg/mL. IMMPHENTIV®, USP, is a clear, colorless, aqueous solution that is essentially free of visible foreign matter, and Ready-To-Use formulation. Each mL contains: 100 mcg of Phenylephrine Hydrochloride USP (equivalent to 82 mcg of phenylephrine base), 7.5 mg of Sodium Chloride USP as tonicity agent; 4 mg of Sodium Citrate Dihydrate USP, and 1 mg of Citric Acid Monohydrate USP, as buffering agents, 0.2 mg of Edetate Disodium USP as chelating agent, and Sodium Hydroxide NF and Hydrochloric Acid NF as pH adjusters, in Water for Injection USP. IMMPHENTIV® injection pH range is 3.0 to 6.5. Phenylephrine Hydrochloride Injection, USP, 10 mg/mL. Phenylephrine Hydrochloride injection, USP is a clear, colorless, aqueous solution that is essentially free of visible foreign matter. It MUST BE DILUTED before administration as bolus intravenous infusion or continuous intravenous infusion. Each mL contains: 10 mg of Phenylephrine Hydrochloride (equivalent to 8.2 mg of phenylephrine base); 3.5 mg of Sodium Chloride USP as tonicity agent; 1 mg of Citric Acid Monohydrate USP and 4 mg of Sodium Citrate Dihydrate USP, as buffering agents; 2 mg of Sodium Metabisulfite USP, as antioxidant, and Sodium Hydroxide NF and Hydrochloric Acid NF, as pH adjusters in Water for Injection. Phenylephrine Hydrochloride injection pH range is 3.0 to 6.5.</Description>
</NDC>
<NDC>
<NDCCode>55154-6188-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-6188-0) > 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-6188-00</NDC11Code>
<ProductNDC>55154-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076017</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-30</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-6188-0</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (50090-6188-0) </PackageDescription>
<NDC11Code>50090-6188-00</NDC11Code>
<ProductNDC>50090-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078246</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-6188-1</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50090-6188-1) </PackageDescription>
<NDC11Code>50090-6188-01</NDC11Code>
<ProductNDC>50090-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078246</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-6188-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-6188-3) </PackageDescription>
<NDC11Code>50090-6188-03</NDC11Code>
<ProductNDC>50090-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078246</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline powder, very soluble in water, freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate, practically insoluble in hexane with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone hydrochloride is supplied as tablets for oral administration containing 5 mg, 7.5 mg, 10 mg, 15 mg, or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are provided in a multi-scored tablet design. These tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet). Buspirone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablet also contains ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>54569-6188-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (54569-6188-1)</PackageDescription>
<NDC11Code>54569-6188-01</NDC11Code>
<ProductNDC>54569-6188</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076201</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0363-0641-09</NDCCode>
<PackageDescription>1 TUBE in 1 PACKAGE (0363-0641-09) / 25.5 g in 1 TUBE (0363-0641-10) </PackageDescription>
<NDC11Code>00363-0641-09</NDC11Code>
<ProductNDC>0363-0641</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hemorrhoidal Cream</ProprietaryName>
<NonProprietaryName>Hemorrhoidal Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180325</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M015</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150; 144; 10; 2.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Allergens [CS], Cell-mediated Immunity [PE], Glycerol [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Chemical Allergen [EPC], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>-for temporary relief of pain, soreness, and burning. -helps relieve the local itching and discomfort associated with hemorrhoids. -temporarily shrinks hemorrhoidal tissue. -temporarily provides a coating for relief of anorectal discomforts. -temporarily protects the inflamed, irritated anorectal surface to help make bowel movements less painful.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-0641-10</NDCCode>
<PackageDescription>1 TUBE in 1 PACKAGE (0363-0641-10) > 25.5 g in 1 TUBE (0363-0641-09) </PackageDescription>
<NDC11Code>00363-0641-10</NDC11Code>
<ProductNDC>0363-0641</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hemorrhoidal Cream</ProprietaryName>
<NonProprietaryName>Hemorrhoidal Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180325</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>PETROLATUM; GLYCERIN; PRAMOXINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15; 14.4; 1; .25</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-0641-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (0378-0641-10) </PackageDescription>
<NDC11Code>00378-0641-10</NDC11Code>
<ProductNDC>0378-0641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088832</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0641-1512-36</NDCCode>
<PackageDescription>100 AMPULE in 1 CARTON (0641-1512-36) > 10 mL in 1 AMPULE (0641-1512-10) </PackageDescription>
<NDC11Code>00641-1512-36</NDC11Code>
<ProductNDC>0641-1512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20120120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201850</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. Its chloride and sodium ion concentrations are approximately 0.154 mEq of each per milliliter and its calculated osmolality is 0.308 milliosmols per mL. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment, pH 5.3 (4.5 to 7.0). Sodium chloride, USP occurs as colorless cubic crystals or white crystalline powder and has a saline taste. Sodium chloride is freely soluble in water. The empirical formula for sodium chloride is NaCl, and the molecular weight is 58.44. The ampul is a colorless sealed sterile glass container.</Description>
</NDC>
<NDC>
<NDCCode>0641-2460-55</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 PACKAGE (0641-2460-55) / 10 mL in 1 VIAL, MULTI-DOSE (0641-2460-30) </PackageDescription>
<NDC11Code>00641-2460-55</NDC11Code>
<ProductNDC>0641-2460</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720322</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017037</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19720322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations/mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. Heparin Sodium Injection, USP, preservative-free is available in the following concentrations. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>0641-2555-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-2555-10) / 5 mL in 1 VIAL (0641-2555-41) </PackageDescription>
<NDC11Code>00641-2555-10</NDC11Code>
<ProductNDC>0641-2555</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenytoin Sodium</ProprietaryName>
<NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19750716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084307</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PHENYTOIN SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Parenteral Phenytoin Sodium Injection is indicated for the treatment of generalized tonic-clonic status epilepticus, and prevention and treatment of seizures occurring during neurosurgery. Intravenous phenytoin can also be substituted, as short-term use, for oral phenytoin. Parenteral phenytoin should be used only when oral phenytoin administration is not possible [see Dosage and Administration (2.1, 2.3) and Warnings and Precautions (5.1)].</IndicationAndUsage>
<Description>Phenytoin Sodium Injection, USP is a sterile solution containing in each mL phenytoin sodium 50 mg, propylene glycol 0.4 mL and alcohol 0.1 mL in Water for Injection. pH 10.0-12.3; sodium hydroxide added, if needed, for pH adjustment. Phenytoin sodium is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione represented by the following structural formula. C15H11N2NaO2 MW 274.25.</Description>
</NDC>
<NDC>
<NDCCode>0641-2569-44</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (0641-2569-44) / 10 mL in 1 VIAL (0641-2569-41) </PackageDescription>
<NDC11Code>00641-2569-44</NDC11Code>
<ProductNDC>0641-2569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19961018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074521</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19961018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dipyridamole Injection is indicated as an alternative to exercise in thallium myocardial perfusion imaging for the evaluation of coronary artery disease in patients who cannot exercise adequately. In a study of about 1100 patients who underwent coronary arteriography and Dipyridamole Injection assisted thallium imaging, the results of both tests were interpreted blindly and the sensitivity and specificity of the dipyridamole thallium study in predicting the angiographic outcome were calculated. The sensitivity of the dipyridamole test (true positive dipyridamole divided by the total number of patients with positive angiography) was about 85%. The specificity (true negative divided by the number of patients with negative angiograms) was about 50%. In a subset of patients who had exercise thallium imaging as well as dipyridamole thallium imaging, sensitivity and specificity of the two tests were almost identical.</IndicationAndUsage>
<Description>Dipyridamole is a coronary vasodilator described as 2,2',2'',2'''-[(4,8 Dipiperidinopyrimido[ 5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. The structural formula is. C24H40N8O4 MW 504.63. Dipyridamole Injection, USP is a sterile, odorless, pale yellow liquid which can be diluted in sodium chloride injection or dextrose injection for intravenous administration. Each mL contains 5 mg dipyridamole, USP, 50 mg polyethylene glycol 600 and 2 mg tartaric acid in Water for Injection, USP. pH 2.2-3.2; hydrochloric acid added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>0641-2965-45</NDCCode>
<PackageDescription>25 VIAL in 1 BOX (0641-2965-45) > 10 mL in 1 VIAL (0641-2965-41)</PackageDescription>
<NDC11Code>00641-2965-45</NDC11Code>
<ProductNDC>0641-2965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esmolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Esmolol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19861231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019386</ApplicationNumber>
<LabelerName>West Ward Pharmaceutical Corporation</LabelerName>
<SubstanceName>ESMOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Esmolol hydrochloride is indicated for the rapid control of ventricular rate in patients with atrial fibrillation or atrial flutter in perioperative, postoperative, or other emergent circumstances where short term control of ventricular rate with a short-acting agent is desirable. Esmolol hydrochloride is also indicated in noncompensatory sinus tachycardia where, in the physician’s judgment, the rapid heart rate requires specific intervention. Esmolol hydrochloride is not intended for use in chronic settings where transfer to another agent is anticipated.</IndicationAndUsage>
<Description>Esmolol hydrochloride is a beta1-selective (cardioselective) adrenergic receptor blocking agent with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol Hydrochloride is. (±)-Methyl p- [2-hydroxy-3- (isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure. Esmolol hydrochloride has the empirical formula C16H26NO4Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol.</Description>
</NDC>
<NDC>
<NDCCode>0641-6000-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6000-10) / 10 mL in 1 VIAL (0641-6000-01) </PackageDescription>
<NDC11Code>00641-6000-10</NDC11Code>
<ProductNDC>0641-6000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0641-6002-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6002-10) / 10 mL in 1 VIAL (0641-6002-01) </PackageDescription>
<NDC11Code>00641-6002-10</NDC11Code>
<ProductNDC>0641-6002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ativan</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19800725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018140</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19800725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0641-6006-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) </PackageDescription>
<NDC11Code>00641-6006-10</NDC11Code>
<ProductNDC>0641-6006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19710101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0641-6007-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0641-6007-10) / 10 mL in 1 VIAL, MULTI-DOSE (0641-6007-01) </PackageDescription>
<NDC11Code>00641-6007-10</NDC11Code>
<ProductNDC>0641-6007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079196</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>0641-6008-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0641-6008-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0641-6008-01) </PackageDescription>
<NDC11Code>00641-6008-10</NDC11Code>
<ProductNDC>0641-6008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079196</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>0641-6013-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6013-10) / 5 mL in 1 VIAL (0641-6013-01) </PackageDescription>
<NDC11Code>00641-6013-10</NDC11Code>
<ProductNDC>0641-6013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6014-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6014-10) / 10 mL in 1 VIAL (0641-6014-01) </PackageDescription>
<NDC11Code>00641-6014-10</NDC11Code>
<ProductNDC>0641-6014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6015-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6015-10) / 25 mL in 1 VIAL (0641-6015-01) </PackageDescription>
<NDC11Code>00641-6015-10</NDC11Code>
<ProductNDC>0641-6015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078538</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is (+)-5-[2-(Dimethylamino)ethyl]-cis-2,3-dihydro-3-hydroxy-2-(p-methoxyphenyl)-1,5-benzothiazepin-4(5H)-one acetate(ester) monohydrochloride. The structural formula is. C22H26N2O4S HCl MW: 450.98. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem hydrochloride injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains: 5 mg Diltiazem Hydrochloride, USP, 0.75 mg Citric Acid Anhydrous, USP, 0.65 mg Sodium Citrate Dihydrate USP, 50 mg Sorbitol NF, and Water for Injection, USP q.s. Sodium Hydroxide or Hydrochloric Acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0641-6019-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6019-10) / 10 mL in 1 AMPULE (0641-6019-01) </PackageDescription>
<NDC11Code>00641-6019-10</NDC11Code>
<ProductNDC>0641-6019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duramorph</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
<Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6020-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6020-10) / 10 mL in 1 AMPULE (0641-6020-01) </PackageDescription>
<NDC11Code>00641-6020-10</NDC11Code>
<ProductNDC>0641-6020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duramorph</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DURAMORPH is indicated for: 1 the management of pain severe enough to require use of an opioid analgesic by intravenous administration, and for which alternative treatments are not expected to be adequate., 2 the epidural or intrathecal management of pain without attendant loss of motor, sensory, or sympathetic function.</IndicationAndUsage>
<Description>DURAMORPH (morphine sulfate injection) is an opioid agonist, available as a sterile, nonpyrogenic isobaric solution of morphine sulfate in strengths of 0.5 mg or 1 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives, and is intended for intravenous, epidural, or intrathecal administration. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of DURAMORPH contains morphine sulfate, USP 0.5 mg (5 mg/10 mL) or 1 mg (10 mg/10 mL) and sodium chloride 9 mg in Water for Injection. The pH range is 2.5 – 6.5. Contains no preservative. Each 10 mL ampul of DURAMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6021-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) </PackageDescription>
<NDC11Code>00641-6021-10</NDC11Code>
<ProductNDC>0641-6021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6023-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6023-10) / 4 mL in 1 VIAL (0641-6023-01) </PackageDescription>
<NDC11Code>00641-6023-10</NDC11Code>
<ProductNDC>0641-6023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230516</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6024-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6024-10) / 2 mL in 1 AMPULE (0641-6024-01) </PackageDescription>
<NDC11Code>00641-6024-10</NDC11Code>
<ProductNDC>0641-6024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6025-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0641-6025-10) / 5 mL in 1 AMPULE (0641-6025-01) </PackageDescription>
<NDC11Code>00641-6025-10</NDC11Code>
<ProductNDC>0641-6025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6028-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6028-10) / 5 mL in 1 VIAL (0641-6028-01) </PackageDescription>
<NDC11Code>00641-6028-10</NDC11Code>
<ProductNDC>0641-6028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6031-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6031-10) > 5 mL in 1 VIAL (0641-6031-01)</PackageDescription>
<NDC11Code>00641-6031-10</NDC11Code>
<ProductNDC>0641-6031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flumazenil</ProprietaryName>
<NonProprietaryName>Flumazenil</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20041012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076787</ApplicationNumber>
<LabelerName>West-ward Pharmaceutical Corp.</LabelerName>
<SubstanceName>FLUMAZENIL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Flumazenil injection is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.</IndicationAndUsage>
<Description>Flumazenil injection is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo [1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure and a calculated molecular weight of 303.29 and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol:buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to 3.5 – 4.5 with hydrochloric acid and/or, if necessary, sodium hydroxide.</Description>
</NDC>
</NDCList>