{
"NDC": [
{
"NDCCode": "0641-6195-20",
"PackageDescription": "20 VIAL, SINGLE-USE in 1 CARTON (0641-6195-20) / 50 mL in 1 VIAL, SINGLE-USE (0641-6195-01) ",
"NDC11Code": "00641-6195-20",
"ProductNDC": "0641-6195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074848",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200501",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion contains propofol 10 mg/mL; soybean oil (100 mg/mL); glycerol (22.5 mg/mL); egg lecithin (12 mg/mL); and benzyl alcohol, 1 mg/mL with sodium hydroxide to adjust pH. It is isotonic and has a pH of 6.5 to 8.5."
},
{
"NDCCode": "54569-6195-0",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (54569-6195-0)",
"NDC11Code": "54569-6195-00",
"ProductNDC": "54569-6195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefprozil",
"NonProprietaryName": "Cefprozil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070723",
"EndMarketingDate": "20140930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065267",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CEFPROZIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-10-03"
},
{
"NDCCode": "0641-2341-41",
"PackageDescription": "20 VIAL in 1 CARTON (0641-2341-41) / 20 mL in 1 VIAL (0641-2341-39) ",
"NDC11Code": "00641-2341-41",
"ProductNDC": "0641-2341",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19720101",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Injection is indicated for the relief of moderate to severe pain such as that due to: surgery, cancer, trauma (soft tissue and bone), biliary colic, myocardial infarction, burns, renal colic.",
"Description": "Hydromorphone Hydrochloride Injection, USP is a sterile solution intended for subcutaneous, intramuscular or slow intravenous injection. Each mL contains hydromorphone hydrochloride 2 mg, edetate disodium 0.5 mg, methylparaben 1.8 mg and propylparaben 0.2 mg in Water for Injection. The pH range is 3.5-5.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. Hydromorphone is a semisynthetic phenanthrene alkaloid of opium; it is classified pharmacologically as a narcotic analgesic. Hydromorphone hydrochloride may be named chemically as 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride, with the following structural formula. C17H19NO3 HCl M.W. 321.80. Hydromorphone hydrochloride occurs as a fine, white or practically white, crystalline powder and is freely soluble in water and sparingly soluble in alcohol."
},
{
"NDCCode": "0641-6006-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) ",
"NDC11Code": "00641-6006-10",
"ProductNDC": "0641-6006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19710101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19710101",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.",
"Description": "Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is."
},
{
"NDCCode": "0641-6018-01",
"PackageDescription": "20 mL in 1 VIAL (0641-6018-01) ",
"NDC11Code": "00641-6018-01",
"ProductNDC": "0641-6018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopram",
"NonProprietaryName": "Doxapram Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19650623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA014879",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DOXAPRAM HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650623",
"SamplePackage": "N",
"IndicationAndUsage": "When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).",
"Description": "DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98."
},
{
"NDCCode": "0641-6018-06",
"PackageDescription": "6 VIAL in 1 CARTON (0641-6018-06) / 20 mL in 1 VIAL (0641-6018-01) ",
"NDC11Code": "00641-6018-06",
"ProductNDC": "0641-6018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopram",
"NonProprietaryName": "Doxapram Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19650623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA014879",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "DOXAPRAM HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650623",
"SamplePackage": "N",
"IndicationAndUsage": "When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).",
"Description": "DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98."
},
{
"NDCCode": "0641-6021-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) ",
"NDC11Code": "00641-6021-10",
"ProductNDC": "0641-6021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075488",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010416",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "0641-6026-05",
"PackageDescription": "5 AMPULE in 1 CARTON (0641-6026-05) / 20 mL in 1 AMPULE (0641-6026-01) ",
"NDC11Code": "00641-6026-05",
"ProductNDC": "0641-6026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6029-01",
"PackageDescription": "20 mL in 1 VIAL (0641-6029-01) ",
"NDC11Code": "00641-6029-01",
"ProductNDC": "0641-6029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6029-25",
"PackageDescription": "25 VIAL in 1 CARTON (0641-6029-25) / 20 mL in 1 VIAL (0641-6029-01) ",
"NDC11Code": "00641-6029-25",
"ProductNDC": "0641-6029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840711",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840711",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "0641-6036-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6036-10) > 20 mL in 1 VIAL (0641-6036-01)",
"NDC11Code": "00641-6036-10",
"ProductNDC": "0641-6036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19750206",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017558",
"LabelerName": "West-ward Pharmaceutical Corp.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mgWater for Injection, USP q.s.Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "0641-6039-01",
"PackageDescription": "20 mL in 1 AMPULE (0641-6039-01) ",
"NDC11Code": "00641-6039-01",
"ProductNDC": "0641-6039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Infumorph 200",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRATHECAL",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "INFUMORPH is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of UseNot for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because INFUMORPH is too concentrated for accurate delivery of the smaller doses used in this setting.",
"Description": "INFUMORPH (preservative-free morphine sulfate sterile solution) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. INFUMORPH is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy-17- methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of INFUMORPH 200 contains morphine sulfate, USP 10 mg (200 mg/20 mL) and sodium chloride 8 mg in Water for Injection, USP. Each mL of INFUMORPH 500 contains morphine sulfate, USP 25 mg (500 mg/20 mL) and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL ampul of INFUMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6040-01",
"PackageDescription": "20 mL in 1 AMPULE (0641-6040-01) ",
"NDC11Code": "00641-6040-01",
"ProductNDC": "0641-6040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Infumorph 500",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRATHECAL",
"StartMarketingDate": "19840918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018565",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840918",
"SamplePackage": "N",
"IndicationAndUsage": "INFUMORPH is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of UseNot for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because INFUMORPH is too concentrated for accurate delivery of the smaller doses used in this setting.",
"Description": "INFUMORPH (preservative-free morphine sulfate sterile solution) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. INFUMORPH is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy-17- methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of INFUMORPH 200 contains morphine sulfate, USP 10 mg (200 mg/20 mL) and sodium chloride 8 mg in Water for Injection, USP. Each mL of INFUMORPH 500 contains morphine sulfate, USP 25 mg (500 mg/20 mL) and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL ampul of INFUMORPH is intended for SINGLE USE ONLY."
},
{
"NDCCode": "0641-6067-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6067-10) > 20 mL in 1 VIAL (0641-6067-01)",
"NDC11Code": "00641-6067-10",
"ProductNDC": "0641-6067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075530",
"LabelerName": "West-ward Pharmaceutical Corp.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC],Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Milrinone Lactate Injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate Injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-Dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.22 and a molecular formula of C 12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate Injection is available as a sterile aqueous solution of the lactate salt of milrinone for intravenous use. Each mL of the 10 mL and 20 mL single dose vials contains milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP in Water for Injection, USP. The pH is adjusted between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously."
},
{
"NDCCode": "0641-6072-01",
"PackageDescription": "20 mL in 1 VIAL (0641-6072-01)",
"NDC11Code": "00641-6072-01",
"ProductNDC": "0641-6072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19710101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "West-ward Pharmaceutical Corp.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2017-07-11"
},
{
"NDCCode": "0641-6079-01",
"PackageDescription": "20 mL in 1 CARTON (0641-6079-01) ",
"NDC11Code": "00641-6079-01",
"ProductNDC": "0641-6079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20061226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077365",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20061226",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of. nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1) postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multiple dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "0641-6107-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6107-10) > 20 mL in 1 VIAL (0641-6107-01) ",
"NDC11Code": "00641-6107-10",
"ProductNDC": "0641-6107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Robinul",
"NonProprietaryName": "Robinul",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19750206",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017558",
"LabelerName": "West-Ward Pharmaceuticals Corp.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "ROBINUL Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, ROBINUL Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "ROBINUL (glycopyrrolate) Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mgWater for Injection, USP q.s.Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. ROBINUL (glycopyrrolate) Injection is a clear, colorless, sterile liquid; pH 2.0– 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "0641-6194-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0641-6194-10) / 20 mL in 1 VIAL, SINGLE-USE (0641-6194-01) ",
"NDC11Code": "00641-6194-10",
"ProductNDC": "0641-6194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074848",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200501",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion contains propofol 10 mg/mL; soybean oil (100 mg/mL); glycerol (22.5 mg/mL); egg lecithin (12 mg/mL); and benzyl alcohol, 1 mg/mL with sodium hydroxide to adjust pH. It is isotonic and has a pH of 6.5 to 8.5."
},
{
"NDCCode": "0641-6231-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0641-6231-25) / 20 mL in 1 VIAL, SINGLE-DOSE (0641-6231-01) ",
"NDC11Code": "00641-6231-25",
"ProductNDC": "0641-6231",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20201218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213667",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201218",
"SamplePackage": "N",
"IndicationAndUsage": "Severe essential hypertension when the drug cannot be given orally or when there is an urgent need to lower blood pressure.",
"Description": "Hydralazine Hydrochloride Injection, USP is an antihypertensive available in a 1 mL vial for intravenous and intramuscular administration. Hydralazine Hydrochloride Injection, USP is a sterile, nonpyrogenic colorless solution. Each mL contains. Active: Hydralazine Hydrochloride USP, 20 mg. Preservative Free Formulation. Inactives: Propylene Glycol USP, 103.6 mg; Sodium Hydroxide and/or Hydrochloric Acid USP to adjust pH (3.4 to 4.4) and Water for Injection. Hydralazine Hydrochloride USP is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Molecular Formula: C8H8N4HCl. Hydralazine Hydrochloride USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64."
},
{
"NDCCode": "0641-6251-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6251-10) / 20 mL in 1 VIAL",
"NDC11Code": "00641-6251-10",
"ProductNDC": "0641-6251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "ENDOTRACHEAL; INTRAMEDULLARY; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213561",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus, carbamate, or muscarinic mushroom poisoning, and to treat symptomatic bradycardia.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution of atropine sulfate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by subcutaneous, intramuscular or intravenous injection. Each mL contains atropine sulfate, 0.4 mg; benzyl alcohol, 9 mg; sodium chloride 9 mg. May contain sulfuric acid for pH adjustment. pH 3.5 (3.0 to 3.8). Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. Atropine Sulfate, USP is chemically designated lα H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 · H2SO4 · H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water."
},
{
"NDCCode": "0641-6254-01",
"PackageDescription": "1 VIAL in 1 CARTON (0641-6254-01) / 20 mL in 1 VIAL",
"NDC11Code": "00641-6254-01",
"ProductNDC": "0641-6254",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250513",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217812",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250513",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, reserve opioid analgesics, including Hydromorphone Hydrochloride Injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydromorphone Hydrochloride is an opioid agonist. The chemical name of hydromorphone hydrochloride is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3·HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white to off-white powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Hydromorphone Hydrochloride Injection 40 mg/20 mL is available as a sterile, clear, colorless aqueous solution in a multiple-dose clear glass vial, for slow intravenous, subcutaneous, or intramuscular administration. Each 1 mL contains 2 mg of hydromorphone hydrochloride (equivalent to 1.8 mg hydromorphone). The inactive ingredients include edetate disodium dihydrate (0.5 mg/mL), methylparaben (1.8 mg/mL), and propylparaben (0.2 mg/mL). Hydrochloric acid and sodium hydroxide are added to adjust the pH between 3.5 and 5.5."
},
{
"NDCCode": "0641-6261-01",
"PackageDescription": "1 VIAL in 1 CARTON (0641-6261-01) / 20 mL in 1 VIAL",
"NDC11Code": "00641-6261-01",
"ProductNDC": "0641-6261",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216920",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "164",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240520",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium acetate injection 40 mEq is indicated as a source of sodium, for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.",
"Description": "Sodium acetate injection USP, 40 mEq (2 mEq/mL) is a sterile, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered, after dilution, by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL contains 3.28 g of sodium acetate (anhydrous) which provides 40 mEq each of sodium (Na+) and acetate (CH3COO−). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium Acetate, USP (anhydrous) is chemically designated CH3COONa, a hygroscopic powder very soluble in water."
},
{
"NDCCode": "0641-6266-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0641-6266-01) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00641-6266-01",
"ProductNDC": "0641-6266",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218609",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Methadone Hydrochloride Injection is indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration, and because of the greater risks of overdose and death with extended-release/long-acting opioid formulations, (see WARNINGS) reserve Methadone Hydrochloride Injection for use in patients for whom alternative treatment options (e.g., nonopioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Methadone Hydrochloride Injection is not indicated as an as-needed (prn) analgesic. For use in temporary treatment of opioid dependence in patients unable to take oral medication. Limitations of UseInjectable methadone products are not approved for the outpatient treatment of opioid dependence. In this patient population, parenteral methadone is to be used only for patients unable to take oral medication, such as hospitalized patients.",
"Description": "Methadone Hydrochloride Injection, USP, 10 mg/mL is an opioid analgesic for parenteral use (intravenous, intramuscular or subcutaneous use). Methadone Hydrochloride Injection, USP, 10 mg/mL contains methadone hydrochloride as the active pharmaceutical ingredient. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Its molecular formula is C21H27NOHCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. Methadone hydrochloride has the following structural formula. Methadone Hydrochloride Injection is a sterile injectable solution available in 20 mL multiple- dose vials. Each mL of the Methadone Hydrochloride Injection contains: 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone free base), 5 mg of chlorobutanol, as a preservative, 9 mg of sodium chloride, as tonicity agent, and hydrochloric acid and sodium hydroxide as pH adjusters, in water for injection. The pH of the sterile injectable solution is between 3.0 to 6.5."
},
{
"NDCCode": "0641-6286-01",
"PackageDescription": "20 mL in 1 VIAL, MULTI-DOSE (0641-6286-01) ",
"NDC11Code": "00641-6286-01",
"ProductNDC": "0641-6286",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20061226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077365",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20061226",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of. nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1) postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multiple dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "0641-6290-01",
"PackageDescription": "1 VIAL in 1 CARTON (0641-6290-01) / 20 mL in 1 VIAL",
"NDC11Code": "00641-6290-01",
"ProductNDC": "0641-6290",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250829",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019101",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250829",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative."
},
{
"NDCCode": "43063-641-20",
"PackageDescription": "20 TABLET in 1 BOTTLE, PLASTIC (43063-641-20) ",
"NDC11Code": "43063-0641-20",
"ProductNDC": "43063-641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085159",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160224",
"SamplePackage": "N"
},
{
"NDCCode": "61919-641-20",
"PackageDescription": "20 TABLET, CHEWABLE in 1 BOTTLE (61919-641-20) ",
"NDC11Code": "61919-0641-20",
"ProductNDC": "61919-641",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Meclizine Hcl",
"NonProprietaryName": "Meclizine Hcl",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20190410",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part336",
"LabelerName": "DIRECTRX",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/251",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-10-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190410",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0641-5",
"PackageDescription": "20 TABLET in 1 BOTTLE (71335-0641-5) ",
"NDC11Code": "71335-0641-05",
"ProductNDC": "71335-0641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19860730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085223",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180719",
"SamplePackage": "N",
"IndicationAndUsage": "Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride, USP is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride, USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide., 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride, USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "0378-0641-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0378-0641-01) ",
"NDC11Code": "00378-0641-01",
"ProductNDC": "0378-0641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088832",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190403",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol."
},
{
"NDCCode": "0378-0641-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (0378-0641-10) ",
"NDC11Code": "00378-0641-10",
"ProductNDC": "0378-0641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088832",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190403",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0641-6195-20</NDCCode>
<PackageDescription>20 VIAL, SINGLE-USE in 1 CARTON (0641-6195-20) / 50 mL in 1 VIAL, SINGLE-USE (0641-6195-01) </PackageDescription>
<NDC11Code>00641-6195-20</NDC11Code>
<ProductNDC>0641-6195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074848</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion contains propofol 10 mg/mL; soybean oil (100 mg/mL); glycerol (22.5 mg/mL); egg lecithin (12 mg/mL); and benzyl alcohol, 1 mg/mL with sodium hydroxide to adjust pH. It is isotonic and has a pH of 6.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>54569-6195-0</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (54569-6195-0)</PackageDescription>
<NDC11Code>54569-6195-00</NDC11Code>
<ProductNDC>54569-6195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefprozil</ProprietaryName>
<NonProprietaryName>Cefprozil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070723</StartMarketingDate>
<EndMarketingDate>20140930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065267</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CEFPROZIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-10-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>0641-2341-41</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (0641-2341-41) / 20 mL in 1 VIAL (0641-2341-39) </PackageDescription>
<NDC11Code>00641-2341-41</NDC11Code>
<ProductNDC>0641-2341</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19720101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Injection is indicated for the relief of moderate to severe pain such as that due to: surgery, cancer, trauma (soft tissue and bone), biliary colic, myocardial infarction, burns, renal colic.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride Injection, USP is a sterile solution intended for subcutaneous, intramuscular or slow intravenous injection. Each mL contains hydromorphone hydrochloride 2 mg, edetate disodium 0.5 mg, methylparaben 1.8 mg and propylparaben 0.2 mg in Water for Injection. The pH range is 3.5-5.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. Hydromorphone is a semisynthetic phenanthrene alkaloid of opium; it is classified pharmacologically as a narcotic analgesic. Hydromorphone hydrochloride may be named chemically as 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride, with the following structural formula. C17H19NO3 HCl M.W. 321.80. Hydromorphone hydrochloride occurs as a fine, white or practically white, crystalline powder and is freely soluble in water and sparingly soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>0641-6006-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6006-10) / 20 mL in 1 VIAL (0641-6006-01) </PackageDescription>
<NDC11Code>00641-6006-10</NDC11Code>
<ProductNDC>0641-6006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19710101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19710101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine sulfate is given parenterally as a preanesthetic medication to decrease salivation and bronchial secretions. It is useful in pylorospasm and other spastic conditions of the gastrointestinal tract. For ureteral and biliary colic, atropine sulfate given with morphine may be indicated. Atropine sulfate is indicated for relaxation of the upper gastrointestinal tract and colon during hypotonic radiography.Atropine is used as an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of aminata and in poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”. Large doses relieve the muscarine-like symptoms and some of the central nervous system manifestations.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile solution of atropine sulfate in Water for Injection. Each mL contains Atropine Sulfate 0.4 mg; Sodium Chloride 9 mg; Benzyl Alcohol 9 mg; Water for Injection qs; pH may be adjusted with Sulfuric Acid if necessary. pH 3.0-6.5.Atropine Sulfate Injection, USP may be given intramuscularly, intravenously or subcutaneously. Atropine is a white crystalline alkaloid which may be extracted from belladonna root or may be produced synthetically. It is used as atropine sulfate because this compound has much greater solubility.Atropine sulfate is an anticholinergic drug. The empirical formula of atropine sulfate is (C17H23NO3)2H2SO4H2O.The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0641-6018-01</NDCCode>
<PackageDescription>20 mL in 1 VIAL (0641-6018-01) </PackageDescription>
<NDC11Code>00641-6018-01</NDC11Code>
<ProductNDC>0641-6018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopram</ProprietaryName>
<NonProprietaryName>Doxapram Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19650623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA014879</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXAPRAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).</IndicationAndUsage>
<Description>DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98.</Description>
</NDC>
<NDC>
<NDCCode>0641-6018-06</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (0641-6018-06) / 20 mL in 1 VIAL (0641-6018-01) </PackageDescription>
<NDC11Code>00641-6018-06</NDC11Code>
<ProductNDC>0641-6018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopram</ProprietaryName>
<NonProprietaryName>Doxapram Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19650623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA014879</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXAPRAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Medullary Respiratory Drive [PE], Respiratory Stimulant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When the possibility of airway obstruction and/or hypoxia have been eliminated, doxapram may be used to stimulate respiration in patients with drug-induced postanesthesia respiratory depression or apnea other than that due to muscle relaxant drugs. To pharmacologically stimulate deep breathing in the postoperative patient. (A quantitative method of assessing oxygenation, such as pulse oximetry, is recommended.).</IndicationAndUsage>
<Description>DOPRAM Injection (doxapram hydrochloride injection, USP) is a clear, colorless, sterile, non-pyrogenic, aqueous solution with pH 3.5 to 5, for intravenous administration. Each 1 mL contains. Doxapram Hydrochloride, USP ................................................................. 20 mgBenzyl Alcohol, NF (as preservative) ......................................................... 0.9%Water for Injection, USP ...........…................................................................. q.s. Doxapram Injection is a respiratory stimulant. Doxapram hydrochloride is a white to off-white, crystalline powder, sparingly soluble in water, alcohol and chloroform. Chemically, doxapram hydrochloride is 1-ethyl-4-[2-(4-morpholinyl)ethyl]-3,3-diphenyl-2-pyrrolidinone monohydrochloride, monohydrate. The chemical structure is. C24H31ClN2O2 H2O M.W. 432.98.</Description>
</NDC>
<NDC>
<NDCCode>0641-6021-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6021-10) / 20 mL in 1 VIAL (0641-6021-01) </PackageDescription>
<NDC11Code>00641-6021-10</NDC11Code>
<ProductNDC>0641-6021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075488</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year., 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks., 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies)., 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is. C8H15N7O2S3 MW 337.45. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg and Water for Injection q.s. 1 mL. The multiple dose vials of 4 mL and 20 mL also contain benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6026-05</NDCCode>
<PackageDescription>5 AMPULE in 1 CARTON (0641-6026-05) / 20 mL in 1 AMPULE (0641-6026-01) </PackageDescription>
<NDC11Code>00641-6026-05</NDC11Code>
<ProductNDC>0641-6026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6029-01</NDCCode>
<PackageDescription>20 mL in 1 VIAL (0641-6029-01) </PackageDescription>
<NDC11Code>00641-6029-01</NDC11Code>
<ProductNDC>0641-6029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6029-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0641-6029-25) / 20 mL in 1 VIAL (0641-6029-01) </PackageDescription>
<NDC11Code>00641-6029-25</NDC11Code>
<ProductNDC>0641-6029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840711</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0641-6036-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6036-10) > 20 mL in 1 VIAL (0641-6036-01)</PackageDescription>
<NDC11Code>00641-6036-10</NDC11Code>
<ProductNDC>0641-6036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19750206</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017558</ApplicationNumber>
<LabelerName>West-ward Pharmaceutical Corp.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mgWater for Injection, USP q.s.Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>0641-6039-01</NDCCode>
<PackageDescription>20 mL in 1 AMPULE (0641-6039-01) </PackageDescription>
<NDC11Code>00641-6039-01</NDC11Code>
<ProductNDC>0641-6039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Infumorph 200</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INFUMORPH is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of UseNot for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because INFUMORPH is too concentrated for accurate delivery of the smaller doses used in this setting.</IndicationAndUsage>
<Description>INFUMORPH (preservative-free morphine sulfate sterile solution) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. INFUMORPH is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy-17- methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of INFUMORPH 200 contains morphine sulfate, USP 10 mg (200 mg/20 mL) and sodium chloride 8 mg in Water for Injection, USP. Each mL of INFUMORPH 500 contains morphine sulfate, USP 25 mg (500 mg/20 mL) and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL ampul of INFUMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6040-01</NDCCode>
<PackageDescription>20 mL in 1 AMPULE (0641-6040-01) </PackageDescription>
<NDC11Code>00641-6040-01</NDC11Code>
<ProductNDC>0641-6040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Infumorph 500</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL</RouteName>
<StartMarketingDate>19840918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018565</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INFUMORPH is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of UseNot for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because INFUMORPH is too concentrated for accurate delivery of the smaller doses used in this setting.</IndicationAndUsage>
<Description>INFUMORPH (preservative-free morphine sulfate sterile solution) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. INFUMORPH is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy-17- methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula. (C17H19NO3)2 H2SO4 5H2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of INFUMORPH 200 contains morphine sulfate, USP 10 mg (200 mg/20 mL) and sodium chloride 8 mg in Water for Injection, USP. Each mL of INFUMORPH 500 contains morphine sulfate, USP 25 mg (500 mg/20 mL) and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL ampul of INFUMORPH is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>0641-6067-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6067-10) > 20 mL in 1 VIAL (0641-6067-01)</PackageDescription>
<NDC11Code>00641-6067-10</NDC11Code>
<ProductNDC>0641-6067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075530</ApplicationNumber>
<LabelerName>West-ward Pharmaceutical Corp.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC],Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Milrinone Lactate Injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate Injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-Dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.22 and a molecular formula of C 12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate Injection is available as a sterile aqueous solution of the lactate salt of milrinone for intravenous use. Each mL of the 10 mL and 20 mL single dose vials contains milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP in Water for Injection, USP. The pH is adjusted between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
</NDC>
<NDC>
<NDCCode>0641-6072-01</NDCCode>
<PackageDescription>20 mL in 1 VIAL (0641-6072-01)</PackageDescription>
<NDC11Code>00641-6072-01</NDC11Code>
<ProductNDC>0641-6072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19710101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>West-ward Pharmaceutical Corp.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-07-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>0641-6079-01</NDCCode>
<PackageDescription>20 mL in 1 CARTON (0641-6079-01) </PackageDescription>
<NDC11Code>00641-6079-01</NDC11Code>
<ProductNDC>0641-6079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20061226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077365</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of. nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1) postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multiple dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>0641-6107-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6107-10) > 20 mL in 1 VIAL (0641-6107-01) </PackageDescription>
<NDC11Code>00641-6107-10</NDC11Code>
<ProductNDC>0641-6107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Robinul</ProprietaryName>
<NonProprietaryName>Robinul</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19750206</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017558</ApplicationNumber>
<LabelerName>West-Ward Pharmaceuticals Corp.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>ROBINUL Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, ROBINUL Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>ROBINUL (glycopyrrolate) Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mgWater for Injection, USP q.s.Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. ROBINUL (glycopyrrolate) Injection is a clear, colorless, sterile liquid; pH 2.0– 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>0641-6194-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0641-6194-10) / 20 mL in 1 VIAL, SINGLE-USE (0641-6194-01) </PackageDescription>
<NDC11Code>00641-6194-10</NDC11Code>
<ProductNDC>0641-6194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074848</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion contains propofol 10 mg/mL; soybean oil (100 mg/mL); glycerol (22.5 mg/mL); egg lecithin (12 mg/mL); and benzyl alcohol, 1 mg/mL with sodium hydroxide to adjust pH. It is isotonic and has a pH of 6.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0641-6231-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0641-6231-25) / 20 mL in 1 VIAL, SINGLE-DOSE (0641-6231-01) </PackageDescription>
<NDC11Code>00641-6231-25</NDC11Code>
<ProductNDC>0641-6231</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20201218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213667</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Severe essential hypertension when the drug cannot be given orally or when there is an urgent need to lower blood pressure.</IndicationAndUsage>
<Description>Hydralazine Hydrochloride Injection, USP is an antihypertensive available in a 1 mL vial for intravenous and intramuscular administration. Hydralazine Hydrochloride Injection, USP is a sterile, nonpyrogenic colorless solution. Each mL contains. Active: Hydralazine Hydrochloride USP, 20 mg. Preservative Free Formulation. Inactives: Propylene Glycol USP, 103.6 mg; Sodium Hydroxide and/or Hydrochloric Acid USP to adjust pH (3.4 to 4.4) and Water for Injection. Hydralazine Hydrochloride USP is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Molecular Formula: C8H8N4HCl. Hydralazine Hydrochloride USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64.</Description>
</NDC>
<NDC>
<NDCCode>0641-6251-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6251-10) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>00641-6251-10</NDC11Code>
<ProductNDC>0641-6251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>ENDOTRACHEAL; INTRAMEDULLARY; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213561</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus, carbamate, or muscarinic mushroom poisoning, and to treat symptomatic bradycardia.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution of atropine sulfate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by subcutaneous, intramuscular or intravenous injection. Each mL contains atropine sulfate, 0.4 mg; benzyl alcohol, 9 mg; sodium chloride 9 mg. May contain sulfuric acid for pH adjustment. pH 3.5 (3.0 to 3.8). Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. Atropine Sulfate, USP is chemically designated lα H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 · H2SO4 · H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0641-6254-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0641-6254-01) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>00641-6254-01</NDC11Code>
<ProductNDC>0641-6254</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250513</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217812</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, reserve opioid analgesics, including Hydromorphone Hydrochloride Injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride is an opioid agonist. The chemical name of hydromorphone hydrochloride is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3·HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white to off-white powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Hydromorphone Hydrochloride Injection 40 mg/20 mL is available as a sterile, clear, colorless aqueous solution in a multiple-dose clear glass vial, for slow intravenous, subcutaneous, or intramuscular administration. Each 1 mL contains 2 mg of hydromorphone hydrochloride (equivalent to 1.8 mg hydromorphone). The inactive ingredients include edetate disodium dihydrate (0.5 mg/mL), methylparaben (1.8 mg/mL), and propylparaben (0.2 mg/mL). Hydrochloric acid and sodium hydroxide are added to adjust the pH between 3.5 and 5.5.</Description>
</NDC>
<NDC>
<NDCCode>0641-6261-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0641-6261-01) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>00641-6261-01</NDC11Code>
<ProductNDC>0641-6261</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216920</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>164</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium acetate injection 40 mEq is indicated as a source of sodium, for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
<Description>Sodium acetate injection USP, 40 mEq (2 mEq/mL) is a sterile, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered, after dilution, by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL contains 3.28 g of sodium acetate (anhydrous) which provides 40 mEq each of sodium (Na+) and acetate (CH3COO−). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium Acetate, USP (anhydrous) is chemically designated CH3COONa, a hygroscopic powder very soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0641-6266-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0641-6266-01) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00641-6266-01</NDC11Code>
<ProductNDC>0641-6266</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218609</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methadone Hydrochloride Injection is indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration, and because of the greater risks of overdose and death with extended-release/long-acting opioid formulations, (see WARNINGS) reserve Methadone Hydrochloride Injection for use in patients for whom alternative treatment options (e.g., nonopioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Methadone Hydrochloride Injection is not indicated as an as-needed (prn) analgesic. For use in temporary treatment of opioid dependence in patients unable to take oral medication. Limitations of UseInjectable methadone products are not approved for the outpatient treatment of opioid dependence. In this patient population, parenteral methadone is to be used only for patients unable to take oral medication, such as hospitalized patients.</IndicationAndUsage>
<Description>Methadone Hydrochloride Injection, USP, 10 mg/mL is an opioid analgesic for parenteral use (intravenous, intramuscular or subcutaneous use). Methadone Hydrochloride Injection, USP, 10 mg/mL contains methadone hydrochloride as the active pharmaceutical ingredient. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Its molecular formula is C21H27NOHCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. Methadone hydrochloride has the following structural formula. Methadone Hydrochloride Injection is a sterile injectable solution available in 20 mL multiple- dose vials. Each mL of the Methadone Hydrochloride Injection contains: 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone free base), 5 mg of chlorobutanol, as a preservative, 9 mg of sodium chloride, as tonicity agent, and hydrochloric acid and sodium hydroxide as pH adjusters, in water for injection. The pH of the sterile injectable solution is between 3.0 to 6.5.</Description>
</NDC>
<NDC>
<NDCCode>0641-6286-01</NDCCode>
<PackageDescription>20 mL in 1 VIAL, MULTI-DOSE (0641-6286-01) </PackageDescription>
<NDC11Code>00641-6286-01</NDC11Code>
<ProductNDC>0641-6286</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20061226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077365</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of. nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1) postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multiple dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>0641-6290-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0641-6290-01) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>00641-6290-01</NDC11Code>
<ProductNDC>0641-6290</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250829</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019101</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>43063-641-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (43063-641-20) </PackageDescription>
<NDC11Code>43063-0641-20</NDC11Code>
<ProductNDC>43063-641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085159</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61919-641-20</NDCCode>
<PackageDescription>20 TABLET, CHEWABLE in 1 BOTTLE (61919-641-20) </PackageDescription>
<NDC11Code>61919-0641-20</NDC11Code>
<ProductNDC>61919-641</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hcl</ProprietaryName>
<NonProprietaryName>Meclizine Hcl</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190410</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part336</ApplicationNumber>
<LabelerName>DIRECTRX</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/251</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0641-5</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (71335-0641-5) </PackageDescription>
<NDC11Code>71335-0641-05</NDC11Code>
<ProductNDC>71335-0641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19860730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085223</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride, USP is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride, USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide., 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride, USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>0378-0641-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0378-0641-01) </PackageDescription>
<NDC11Code>00378-0641-01</NDC11Code>
<ProductNDC>0378-0641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088832</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
</NDC>
<NDC>
<NDCCode>0378-0641-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (0378-0641-10) </PackageDescription>
<NDC11Code>00378-0641-10</NDC11Code>
<ProductNDC>0378-0641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088832</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................5 mg, 10 mg and 20 mg. Inactive Ingredients. Prednisone tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone tablets of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
</NDC>
</NDCList>