RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>0781-7058-39</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0781-7058-39)  &gt; 5 g in 1 TUBE</PackageDescription>
    <NDC11Code>00781-7058-39</NDC11Code>
    <ProductNDC>0781-7058</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20030827</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076320</ApplicationNumber>
    <LabelerName>Sandoz Inc.</LabelerName>
    <SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
    <StrengthNumber>25; 25</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-07-14</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>0781-7058-03</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0781-7058-03)  &gt; 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>00781-7058-03</NDC11Code>
    <ProductNDC>0781-7058</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20030827</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076320</ApplicationNumber>
    <LabelerName>Sandoz Inc.</LabelerName>
    <SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
    <StrengthNumber>25; 25</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-07-14</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>0781-7058-05</NDCCode>
    <PackageDescription>5 TUBE in 1 CARTON (0781-7058-05)  &gt; 5 g in 1 TUBE</PackageDescription>
    <NDC11Code>00781-7058-05</NDC11Code>
    <ProductNDC>0781-7058</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20030827</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076320</ApplicationNumber>
    <LabelerName>Sandoz Inc.</LabelerName>
    <SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
    <StrengthNumber>25; 25</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-06</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>0781-1943-39</NDCCode>
    <PackageDescription>40 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0781-1943-39) </PackageDescription>
    <NDC11Code>00781-1943-39</NDC11Code>
    <ProductNDC>0781-1943</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090227</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMOXICILLIN; AMOXICILLIN SODIUM; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>562.5; 437.5; 62.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillin-class Antibacterial [EPC], Penicillins [CS], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and clavulanate potassium extended-release tablets is indicated for the treatment of infections in adults and pediatric patients weighing greater than or equal to 40 kg who are able to swallow tablets with: 1 community-acquired pneumonia or, 2 acute bacterial sinusitis.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium extended-release tablets for oral use is an antibacterial combination consisting of the semisynthetic antibacterial amoxicillin (present as amoxicillin trihydrate and amoxicillin sodium) and the β-lactamase inhibitor clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin trihydrate molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Chemically, amoxicillin trihydrate is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3‑ dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. The amoxicillin sodium molecular formula is C16H18N3NaO5S, and the molecular weight is 387.39. Chemically, amoxicillin sodium is [2 -[2α,5α,6β(S*)]]-6-[[Amino(4‑ hydroxyphenyl)acetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2‑ carboxylic acid monosodium salt and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β‑lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxy ethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as. Each tablet of amoxicillin and clavulanate potassium extended-release contains 1,000 mg of amoxicillin (437.5 mg as amoxicillin sodium and 562.5 mg as amoxicillin trihydrate), and 62.5 mg of clavulanic acid (equivalent to 74.5 mg of clavulanate potassium). Inactive Ingredients: Anhydrous citric acid, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and xanthan gum. Each tablet of amoxicillin and clavulanate potassium extended-release tablets contains approximately 12 mg of potassium and 29 mg of sodium. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7263-68</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0781-7263-68)  *  5 g in 1 BOTTLE (0781-6514-39)  *  20 g in 1 JAR (0781-7262-22) </PackageDescription>
    <NDC11Code>00781-7263-68</NDC11Code>
    <ProductNDC>0781-7263</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
    <NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20170815</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204087</ApplicationNumber>
    <LabelerName>Sandoz Inc.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170815</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
    <Description>For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below.  clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>41520-781-39</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (41520-781-39)  / 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>41520-0781-39</NDC11Code>
    <ProductNDC>41520-781</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Careone Allergy Relief</ProprietaryName>
    <NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160929</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078336</ApplicationNumber>
    <LabelerName>American Sales Company</LabelerName>
    <SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160929</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>65862-781-39</NDCCode>
    <PackageDescription>3000 TABLET, FILM COATED in 1 BAG (65862-781-39) </PackageDescription>
    <NDC11Code>65862-0781-39</NDC11Code>
    <ProductNDC>65862-781</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <StartMarketingDate>20170424</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE; OLMESARTAN MEDOXOMIL</SubstanceName>
    <StrengthNumber>25; 40</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-03-26</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>24-APR-17</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>0781-1943-82</NDCCode>
    <PackageDescription>28 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0781-1943-82) </PackageDescription>
    <NDC11Code>00781-1943-82</NDC11Code>
    <ProductNDC>0781-1943</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090227</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMOXICILLIN; AMOXICILLIN SODIUM; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>562.5; 437.5; 62.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillin-class Antibacterial [EPC], Penicillins [CS], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and clavulanate potassium extended-release tablets is indicated for the treatment of infections in adults and pediatric patients weighing greater than or equal to 40 kg who are able to swallow tablets with: 1 community-acquired pneumonia or, 2 acute bacterial sinusitis.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium extended-release tablets for oral use is an antibacterial combination consisting of the semisynthetic antibacterial amoxicillin (present as amoxicillin trihydrate and amoxicillin sodium) and the β-lactamase inhibitor clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin trihydrate molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Chemically, amoxicillin trihydrate is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3‑ dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. The amoxicillin sodium molecular formula is C16H18N3NaO5S, and the molecular weight is 387.39. Chemically, amoxicillin sodium is [2 -[2α,5α,6β(S*)]]-6-[[Amino(4‑ hydroxyphenyl)acetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2‑ carboxylic acid monosodium salt and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β‑lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxy ethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as. Each tablet of amoxicillin and clavulanate potassium extended-release contains 1,000 mg of amoxicillin (437.5 mg as amoxicillin sodium and 562.5 mg as amoxicillin trihydrate), and 62.5 mg of clavulanic acid (equivalent to 74.5 mg of clavulanate potassium). Inactive Ingredients: Anhydrous citric acid, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and xanthan gum. Each tablet of amoxicillin and clavulanate potassium extended-release tablets contains approximately 12 mg of potassium and 29 mg of sodium. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3110-95</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0781-3110-95)  / 10 mL in 1 VIAL, SINGLE-USE (0781-3110-90) </PackageDescription>
    <NDC11Code>00781-3110-95</NDC11Code>
    <ProductNDC>0781-3110</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; PARENTERAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065362</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>2; .25</StrengthNumber>
    <StrengthUnit>g/10mL; g/10mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3113-95</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0781-3113-95)  / 15 mL in 1 VIAL, SINGLE-USE (0781-3113-90) </PackageDescription>
    <NDC11Code>00781-3113-95</NDC11Code>
    <ProductNDC>0781-3113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; PARENTERAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065362</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>3; .375</StrengthNumber>
    <StrengthUnit>g/15mL; g/15mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3114-95</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0781-3114-95)  / 20 mL in 1 VIAL, SINGLE-USE (0781-3114-91) </PackageDescription>
    <NDC11Code>00781-3114-95</NDC11Code>
    <ProductNDC>0781-3114</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; PARENTERAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065362</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>4; .5</StrengthNumber>
    <StrengthUnit>g/20mL; g/20mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3400-95</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3400-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3400-78) </PackageDescription>
    <NDC11Code>00781-3400-95</NDC11Code>
    <ProductNDC>0781-3400</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250131</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3402-95</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3402-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3402-78) </PackageDescription>
    <NDC11Code>00781-3402-95</NDC11Code>
    <ProductNDC>0781-3402</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3404-95</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3404-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3404-85) </PackageDescription>
    <NDC11Code>00781-3404-95</NDC11Code>
    <ProductNDC>0781-3404</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3407-95</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3407-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3407-78) </PackageDescription>
    <NDC11Code>00781-3407-95</NDC11Code>
    <ProductNDC>0781-3407</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3408-95</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3408-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3408-80) </PackageDescription>
    <NDC11Code>00781-3408-95</NDC11Code>
    <ProductNDC>0781-3408</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3409-95</NDCCode>
    <PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 PACKAGE (0781-3409-95)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (0781-3409-46) </PackageDescription>
    <NDC11Code>00781-3409-95</NDC11Code>
    <ProductNDC>0781-3409</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19710303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA061395</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19710303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. The pharmacy bulk package contains sterile ampicillin sodium equivalent to 10 grams ampicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The solution after reconstitution is clear, colorless and free from visible particulates. Each Pharmacy Bulk Package bottle contains ampicillin sodium equivalent to 10 grams of ampicillin. The sodium content is 65.8 mg (2.9 mEq) per one gram ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DOSAGE AND ADMINISTRATION, Directions For Proper Use of Pharmacy Bulk Package). It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3412-92</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3412-92)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3412-15) </PackageDescription>
    <NDC11Code>00781-3412-92</NDC11Code>
    <ProductNDC>0781-3412</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19870219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062738</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19870219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP, the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each ADD-Vantage® vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 2.9 milliequivalents of sodium per gram of ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3413-92</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 PACKAGE (0781-3413-92)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (0781-3413-15) </PackageDescription>
    <NDC11Code>00781-3413-92</NDC11Code>
    <ProductNDC>0781-3413</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19870219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062738</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19870219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP, the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates. Each ADD-Vantage® vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 2.9 milliequivalents of sodium per gram of ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3421-94</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0781-3421-94)  &gt; 10.8 mL in 1 VIAL, SINGLE-DOSE (0781-3421-01) </PackageDescription>
    <NDC11Code>00781-3421-94</NDC11Code>
    <ProductNDC>0781-3421</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180904</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200833</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180904</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. ( 1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. ( 1) , 3 Treatment of esophageal candidiasis. ( 1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (  1)  .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3 R)-3-hydroxy-L-ornithine] pneumocandin B 0 diacetate (salt). Caspofungin acetate for injection, 50 mg contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection, 50 mg also contains: 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection, 70 mg contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection, 70 mg also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C 52H 88N 10O 15∙2C 2H 4O 2 and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3423-94</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0781-3423-94)  &gt; 10.8 mL in 1 VIAL, SINGLE-DOSE (0781-3423-01) </PackageDescription>
    <NDC11Code>00781-3423-94</NDC11Code>
    <ProductNDC>0781-3423</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180904</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200833</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>7</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180904</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. ( 1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. ( 1) , 3 Treatment of esophageal candidiasis. ( 1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (  1)  .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3 R)-3-hydroxy-L-ornithine] pneumocandin B 0 diacetate (salt). Caspofungin acetate for injection, 50 mg contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection, 50 mg also contains: 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection, 70 mg contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection, 70 mg also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C 52H 88N 10O 15∙2C 2H 4O 2 and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-3440-95</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0781-3440-95)  / 1 mL in 1 VIAL (0781-3440-71) </PackageDescription>
    <NDC11Code>00781-3440-95</NDC11Code>
    <ProductNDC>0781-3440</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cosyntropin</ProprietaryName>
    <NonProprietaryName>Cosyntropin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120629</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202147</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>COSYNTROPIN</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenocorticotropic Hormone [CS], Adrenocorticotropic Hormone [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120629</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cosyntropin for injection is indicated, in combination with other diagnostic tests, for use as a diagnostic agent in the screening of adrenocortical insufficiency in adults and pediatric patients.</IndicationAndUsage>
    <Description>Cosyntropin is an adrenocorticotropic hormone (ACTH). Cosyntropin is synthetic beta 1 - 24 corticotropin, a synthetic subunit of ACTH. It is an open chain polypeptide containing, the first 24 of the 39 amino acids of natural ACTH in sequence from N terminal. The sequence of amino acids in the 1 - 24 compound is as follows:. Molecular Formula: C136H210N40O31S. Molecular Weight: 2933 g/mol. Cosyntropin for injection is a sterile lyophilized powder in single-dose vials containing 0.25 mg of cosyntropin and 10 mg of mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7129-40</NDCCode>
    <PackageDescription>3 PACKET in 1 CARTON (0781-7129-40)  / 8 POUCH in 1 PACKET (0781-7129-83)  / 1 PATCH in 1 POUCH (0781-7129-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7129-40</NDC11Code>
    <ProductNDC>0781-7129</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7129-83</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (0781-7129-83)  / 1 PATCH in 1 POUCH (0781-7129-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7129-83</NDC11Code>
    <ProductNDC>0781-7129</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7138-40</NDCCode>
    <PackageDescription>3 PACKET in 1 CARTON (0781-7138-40)  / 8 POUCH in 1 PACKET (0781-7138-83)  / 1 PATCH in 1 POUCH (0781-7138-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7138-40</NDC11Code>
    <ProductNDC>0781-7138</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7138-83</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (0781-7138-83)  / 1 PATCH in 1 POUCH (0781-7138-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7138-83</NDC11Code>
    <ProductNDC>0781-7138</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7144-40</NDCCode>
    <PackageDescription>3 PACKET in 1 CARTON (0781-7144-40)  / 8 POUCH in 1 PACKET (0781-7144-83)  / 1 PATCH in 1 POUCH (0781-7144-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7144-40</NDC11Code>
    <ProductNDC>0781-7144</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7144-83</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (0781-7144-83)  / 1 PATCH in 1 POUCH (0781-7144-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7144-83</NDC11Code>
    <ProductNDC>0781-7144</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7156-40</NDCCode>
    <PackageDescription>3 PACKET in 1 CARTON (0781-7156-40)  / 8 POUCH in 1 PACKET (0781-7156-83)  / 1 PATCH in 1 POUCH (0781-7156-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7156-40</NDC11Code>
    <ProductNDC>0781-7156</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-7156-83</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (0781-7156-83)  / 1 PATCH in 1 POUCH (0781-7156-58)  / 3.5 d in 1 PATCH</PackageDescription>
    <NDC11Code>00781-7156-83</NDC11Code>
    <ProductNDC>0781-7156</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20141222</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020538</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
  </NDC>
</NDCList>