{
"NDC": [
{
"NDCCode": "0941-0424-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0424-53) ",
"NDC11Code": "00941-0424-53",
"ProductNDC": "0941-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "1.5; 538; 448; 18.3; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "51655-424-53",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (51655-424-53) ",
"NDC11Code": "51655-0424-53",
"ProductNDC": "51655-424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220922",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days (see DOSAGE AND ADMINISTRATION section).",
"Description": "Phenazopyridine Hydrochloride, USP is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. C 11H 11N 5HCl M.W. 249.70. Phenazopyridine HCl tablets, USP contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch."
},
{
"NDCCode": "71610-424-53",
"PackageDescription": "60 TABLET in 1 BOTTLE (71610-424-53) ",
"NDC11Code": "71610-0424-53",
"ProductNDC": "71610-424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19861210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2022-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200507",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam tablets, USP are a benzodiazepine derivative. The chemical name of diazepam, USP is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is an off-white to yellow crystalline powder, insoluble in water. The structural formula is as follows. C16H13ClN2O M.W. 284.74. Diazepam tablets, USP are available as 2 mg, 5 mg, or 10 mg tablets for oral administration containing the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1 aluminum lake); magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, and sodium starch glycolate."
},
{
"NDCCode": "0941-0424-51",
"PackageDescription": "1500 mL in 1 BAG (0941-0424-51) ",
"NDC11Code": "00941-0424-51",
"ProductNDC": "0941-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "1.5; 538; 448; 18.3; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0424-52",
"PackageDescription": "2000 mL in 1 BAG (0941-0424-52) ",
"NDC11Code": "00941-0424-52",
"ProductNDC": "0941-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "1.5; 538; 448; 18.3; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0424-55",
"PackageDescription": "3000 mL in 1 BAG (0941-0424-55) ",
"NDC11Code": "00941-0424-55",
"ProductNDC": "0941-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE",
"StrengthNumber": "18.3; 1.5; 5.08; 538; 448",
"StrengthUnit": "mg/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-05-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19921204",
"EndMarketingDatePackage": "20250527",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0426-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0426-53) ",
"NDC11Code": "00941-0426-53",
"ProductNDC": "0941-0426",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Pd-2 With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020163",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "1.5; 538; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0427-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0427-53) ",
"NDC11Code": "00941-0427-53",
"ProductNDC": "0941-0427",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Pd-2 With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020163",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "2.5; 538; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0429-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0429-53) ",
"NDC11Code": "00941-0429-53",
"ProductNDC": "0941-0429",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Pd-2 With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020163",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "4.25; 538; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0430-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0430-53) ",
"NDC11Code": "00941-0430-53",
"ProductNDC": "0941-0430",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "2.5; 538; 448; 18.3; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0433-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0433-53) ",
"NDC11Code": "00941-0433-53",
"ProductNDC": "0941-0433",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dianeal Low Calcium With Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "19921204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020183",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "4.25; 538; 448; 18.3; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19921204",
"SamplePackage": "N",
"IndicationAndUsage": "DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.",
"Description": "DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies."
},
{
"NDCCode": "0941-0679-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0679-53) ",
"NDC11Code": "00941-0679-53",
"ProductNDC": "0941-0679",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extraneal",
"NonProprietaryName": "Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "20021220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021321",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "7.5; 535; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021220",
"SamplePackage": "N",
"IndicationAndUsage": "EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].",
"Description": "EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "67046-424-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-424-30) ",
"NDC11Code": "67046-0424-30",
"ProductNDC": "67046-424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170101",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril tablet USP is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn)."
},
{
"NDCCode": "42291-941-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (42291-941-90) ",
"NDC11Code": "42291-0941-90",
"ProductNDC": "42291-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203534",
"LabelerName": "AvKARE",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"Description": "Irbesartan, USP is an angiotensin II receptor (AT 1subtype) antagonist. Irbesartan, USP is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.53. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration as unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized starch."
},
{
"NDCCode": "50458-941-01",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (50458-941-01) ",
"NDC11Code": "50458-0941-01",
"ProductNDC": "50458-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Invokamet Xr",
"NonProprietaryName": "Canagliflozin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160920",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205879",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "CANAGLIFLOZIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], P-Glycoprotein Inhibitors [MoA], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160920",
"SamplePackage": "N",
"IndicationAndUsage": "INVOKAMET. INVOKAMET is a combination of canagliflozin and metformin HCl immediate-release indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus. INVOKAMET XR. INVOKAMET XR is a combination of canagliflozin and metformin HCl extended-release indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus. Canagliflozin. Canagliflozin, when used as a component of INVOKAMET or INVOKAMET XR, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Major adverse cardiovascular events (cardiovascular death, nonfatal myocardial infarction and nonfatal stroke) in adults with type 2 diabetes mellitus and established cardiovascular disease (CVD)., 2 End-stage kidney disease (ESKD), doubling of serum creatinine, cardiovascular (CV) death, and hospitalization for heart failure in adults with type 2 diabetes mellitus and diabetic nephropathy with albuminuria greater than 300 mg/day.",
"Description": "INVOKAMET® (canagliflozin and metformin HCl immediate-release tablets) and INVOKAMET® XR (canagliflozin and metformin HCl extended-release tablets) contain canagliflozin and metformin HCl. Canagliflozin. Canagliflozin is an inhibitor of SGLT2, the transporter responsible for reabsorbing the majority of glucose filtered by the kidney. Canagliflozin is chemically known as (1S)-1,5-anhydro-1-[3-[[5-(4-fluorophenyl)-2-thienyl]methyl]-4-methylphenyl]-D-glucitol hemihydrate and its molecular formula and weight are C24H25FO5S∙1/2 H2O and 453.53, respectively. The structural formula for canagliflozin is. Canagliflozin is practically insoluble in aqueous media from pH 1.1 to 12.9. Metformin HCl. Metformin HCl is a biguanide chemically known as 1,1-Dimethylbiguanide HCl and its molecular formula and weight are C4H11N5 ∙ HCl and 165.62, respectively. The structural formula for metformin HCl is. INVOKAMET and INVOKAMET XR. INVOKAMET or INVOKAMET XR are supplied as film-coated tablets for oral administration. Each 50 mg/500 mg tablet and 50 mg/1,000 mg tablet contains 51 mg of canagliflozin equivalent to 50 mg canagliflozin (anhydrous) and 500 mg or 1,000 mg metformin HCl (equivalent to metformin 389.93 mg and 779.86 mg, respectively). Each 150 mg/500 mg tablet and 150 mg/1,000 mg tablet contains 153 mg of canagliflozin equivalent to 150 mg canagliflozin (anhydrous) and 500 mg or 1,000 mg metformin HCl (equivalent to metformin 389.93 mg and 779.86 mg, respectively). INVOKAMET contains the following inactive ingredients: croscarmellose sodium (E468), hypromellose, magnesium stearate (E572), and microcrystalline cellulose (E460[i]). The magnesium stearate is vegetable-sourced. The tablets are finished with a commercially available film-coating consisting of the following inactive ingredients: macrogol/PEG3350 (E1521), polyvinyl alcohol (E1203) (partially hydrolyzed), talc (E553b), titanium dioxide (E171), iron oxide yellow (E172) (50 mg/1,000 mg and 150 mg/500 mg tablets only), iron oxide red (E172) (50 mg/1,000 mg, 150 mg/500 mg and 150 mg/1,000 mg tablets only), and iron oxide black (E172) (150 mg/1,000 mg tablets only). INVOKAMET XR contains the following inactive ingredients: croscarmellose sodium (E468), hydroxypropyl cellulose (E463), hypromellose, lactose anhydrous, magnesium stearate (E572) (vegetable-sourced), microcrystalline cellulose (E460[i]), polyethylene oxide, and silicified microcrystalline cellulose (50 mg/500 mg and 50 mg/1,000 mg tablets only). The tablets are finished with a commercially available film-coating consisting of the following inactive ingredients: macrogol/PEG3350 (E1521), polyvinyl alcohol (E1203) (partially hydrolyzed), talc (E553b), titanium dioxide (E171), iron oxide red (E172), iron oxide yellow (E172), and iron oxide black (E172) (50 mg/1,000 mg and 150 mg/1,000 mg tablets only). INVOKAMET XR tablets provide canagliflozin for immediate-release and metformin HCl for extended-release. Each bilayer tablet is compressed from two separate granulates, one for each active ingredient of the tablet, and finished with a film-coating. The metformin HCl extended-release layer is based on a polymer matrix which controls the drug release by passive diffusion through the swollen matrix in combination with tablet erosion."
},
{
"NDCCode": "55648-941-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (55648-941-01)",
"NDC11Code": "55648-0941-01",
"ProductNDC": "55648-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "55648-941-02",
"PackageDescription": "3000 TABLET in 1 BOTTLE (55648-941-02)",
"NDC11Code": "55648-0941-02",
"ProductNDC": "55648-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "55648-941-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (55648-941-03) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "55648-0941-03",
"ProductNDC": "55648-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "55648-941-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (55648-941-05)",
"NDC11Code": "55648-0941-05",
"ProductNDC": "55648-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "55648-941-06",
"PackageDescription": "1000 TABLET in 1 BOTTLE (55648-941-06)",
"NDC11Code": "55648-0941-06",
"ProductNDC": "55648-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "64679-941-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (64679-941-01) ",
"NDC11Code": "64679-0941-01",
"ProductNDC": "64679-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070419",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "64679-941-02",
"PackageDescription": "3000 TABLET in 1 BOTTLE (64679-941-02) ",
"NDC11Code": "64679-0941-02",
"ProductNDC": "64679-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070419",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "64679-941-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-941-03) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "64679-0941-03",
"ProductNDC": "64679-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070419",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "64679-941-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (64679-941-05) ",
"NDC11Code": "64679-0941-05",
"ProductNDC": "64679-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070419",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "64679-941-06",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64679-941-06) ",
"NDC11Code": "64679-0941-06",
"ProductNDC": "64679-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078402",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070419",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg)."
},
{
"NDCCode": "0078-0424-05",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0078-0424-05) ",
"NDC11Code": "00078-0424-05",
"ProductNDC": "0078-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ritalin",
"ProprietaryNameSuffix": "La",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20020605",
"EndMarketingDate": "20261031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021284",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20020605",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "Ritalin LA® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), in pediatric patients 6 to 12 years of age [see Clinical Studies (14)]. Limitations of Use. The use of Ritalin LA is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7), Use in Specific Populations (8.4)].",
"Description": "Ritalin LA contains methylphenidate hydrochloride, a CNS stimulant. Ritalin LA extended-release capsules is an extended-release formulation of methylphenidate for oral administration with a bi-modal release profile. Each bead-filled Ritalin LA capsule contains half the dose as immediate-release beads and half as enteric-coated beads, thus providing an immediate release of methylphenidate and a second delayed release of methylphenidate. The active substance in Ritalin LA is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride USP is a white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: ammonio methacrylate copolymer, black iron oxide (10 and 40 mg capsules only), gelatin, methacrylic acid copolymer, polyethylene glycol, red iron oxide (10 and 40 mg capsules only), sugar spheres, talc, titanium dioxide, triethyl citrate, and yellow iron oxide (10, 30, and 40 mg capsules only)."
},
{
"NDCCode": "0168-0424-46",
"PackageDescription": "1 TUBE in 1 CARTON (0168-0424-46) / 45 g in 1 TUBE",
"NDC11Code": "00168-0424-46",
"ProductNDC": "0168-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090824",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100630",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene cream is indicated for the topical treatment of acne vulgaris.",
"Description": "Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:."
},
{
"NDCCode": "0173-0424-00",
"PackageDescription": "24 CONTAINER in 1 CARTON (0173-0424-00) > 50 mL in 1 CONTAINER",
"NDC11Code": "00173-0424-00",
"ProductNDC": "0173-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zinacef",
"NonProprietaryName": "Cefuroxime",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19890501",
"EndMarketingDate": "20140228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050643",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-03-05"
},
{
"NDCCode": "0338-0424-18",
"PackageDescription": "1 BAG in 1 CARTON (0338-0424-18) / 500 mL in 1 BAG",
"NDC11Code": "00338-0424-18",
"ProductNDC": "0338-0424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19820428",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018609",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190419",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D- glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium in Sodium Chloride Injection is a buffered, sterile, nonpyrogenic solution of Heparin Sodium, USP derived from porcine intestinal mucosa, standardized for anticoagulant activity supplied in single dose containers for vascular administration. It contains no antimicrobial agents. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Composition, osmolarity, pH and ionic concentration are shown in Table 1. This VIAFLEX PLUS plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX PLUS on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX PLUS plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0363-0424-05",
"PackageDescription": "3 CONTAINER in 1 CARTON (0363-0424-05) / 24 LOZENGE in 1 CONTAINER",
"NDC11Code": "00363-0424-05",
"ProductNDC": "0363-0424",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20100112",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090821",
"LabelerName": "Walgreen Company",
"SubstanceName": "NICOTINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2023-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100112",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0941-0424-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0424-53) </PackageDescription>
<NDC11Code>00941-0424-53</NDC11Code>
<ProductNDC>0941-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5; 538; 448; 18.3; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>51655-424-53</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (51655-424-53) </PackageDescription>
<NDC11Code>51655-0424-53</NDC11Code>
<ProductNDC>51655-424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days (see DOSAGE AND ADMINISTRATION section).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride, USP is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. C 11H 11N 5HCl M.W. 249.70. Phenazopyridine HCl tablets, USP contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>71610-424-53</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71610-424-53) </PackageDescription>
<NDC11Code>71610-0424-53</NDC11Code>
<ProductNDC>71610-424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19861210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2022-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam tablets, USP are a benzodiazepine derivative. The chemical name of diazepam, USP is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is an off-white to yellow crystalline powder, insoluble in water. The structural formula is as follows. C16H13ClN2O M.W. 284.74. Diazepam tablets, USP are available as 2 mg, 5 mg, or 10 mg tablets for oral administration containing the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1 aluminum lake); magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0941-0424-51</NDCCode>
<PackageDescription>1500 mL in 1 BAG (0941-0424-51) </PackageDescription>
<NDC11Code>00941-0424-51</NDC11Code>
<ProductNDC>0941-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5; 538; 448; 18.3; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0424-52</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0941-0424-52) </PackageDescription>
<NDC11Code>00941-0424-52</NDC11Code>
<ProductNDC>0941-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5; 538; 448; 18.3; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0424-55</NDCCode>
<PackageDescription>3000 mL in 1 BAG (0941-0424-55) </PackageDescription>
<NDC11Code>00941-0424-55</NDC11Code>
<ProductNDC>0941-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; SODIUM LACTATE</SubstanceName>
<StrengthNumber>18.3; 1.5; 5.08; 538; 448</StrengthNumber>
<StrengthUnit>mg/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<EndMarketingDatePackage>20250527</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0426-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0426-53) </PackageDescription>
<NDC11Code>00941-0426-53</NDC11Code>
<ProductNDC>0941-0426</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Pd-2 With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020163</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5; 538; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0427-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0427-53) </PackageDescription>
<NDC11Code>00941-0427-53</NDC11Code>
<ProductNDC>0941-0427</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Pd-2 With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020163</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>2.5; 538; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0429-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0429-53) </PackageDescription>
<NDC11Code>00941-0429-53</NDC11Code>
<ProductNDC>0941-0429</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Pd-2 With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020163</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>4.25; 538; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0430-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0430-53) </PackageDescription>
<NDC11Code>00941-0430-53</NDC11Code>
<ProductNDC>0941-0430</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>2.5; 538; 448; 18.3; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0433-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0433-53) </PackageDescription>
<NDC11Code>00941-0433-53</NDC11Code>
<ProductNDC>0941-0433</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dianeal Low Calcium With Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>19921204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020183</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>4.25; 538; 448; 18.3; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DIANEAL peritoneal dialysis solutions are indicated for patients in acute or chronic renal failure.</IndicationAndUsage>
<Description>DIANEAL peritoneal dialysis solutions are sterile, nonpyrogenic solutions in flexible containers for intraperitoneal administration only. The peritoneal dialysis solutions contain no bacteriostatic or antimicrobial agents. DIANEAL solutions are hyperosmolar solutions. The plastic container is fabricated from polyvinyl chloride (PVC Plastic). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the solution container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g. di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by cell culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0679-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0679-53) </PackageDescription>
<NDC11Code>00941-0679-53</NDC11Code>
<ProductNDC>0941-0679</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extraneal</ProprietaryName>
<NonProprietaryName>Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>20021220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021321</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>7.5; 535; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].</IndicationAndUsage>
<Description>EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>67046-424-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-424-30) </PackageDescription>
<NDC11Code>67046-0424-30</NDC11Code>
<ProductNDC>67046-424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril tablet USP is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn).</Description>
</NDC>
<NDC>
<NDCCode>42291-941-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (42291-941-90) </PackageDescription>
<NDC11Code>42291-0941-90</NDC11Code>
<ProductNDC>42291-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203534</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Irbesartan, USP is an angiotensin II receptor (AT 1subtype) antagonist. Irbesartan, USP is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.53. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration as unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>50458-941-01</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (50458-941-01) </PackageDescription>
<NDC11Code>50458-0941-01</NDC11Code>
<ProductNDC>50458-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Invokamet Xr</ProprietaryName>
<NonProprietaryName>Canagliflozin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160920</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205879</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CANAGLIFLOZIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], P-Glycoprotein Inhibitors [MoA], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INVOKAMET. INVOKAMET is a combination of canagliflozin and metformin HCl immediate-release indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus. INVOKAMET XR. INVOKAMET XR is a combination of canagliflozin and metformin HCl extended-release indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus. Canagliflozin. Canagliflozin, when used as a component of INVOKAMET or INVOKAMET XR, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Major adverse cardiovascular events (cardiovascular death, nonfatal myocardial infarction and nonfatal stroke) in adults with type 2 diabetes mellitus and established cardiovascular disease (CVD)., 2 End-stage kidney disease (ESKD), doubling of serum creatinine, cardiovascular (CV) death, and hospitalization for heart failure in adults with type 2 diabetes mellitus and diabetic nephropathy with albuminuria greater than 300 mg/day.</IndicationAndUsage>
<Description>INVOKAMET® (canagliflozin and metformin HCl immediate-release tablets) and INVOKAMET® XR (canagliflozin and metformin HCl extended-release tablets) contain canagliflozin and metformin HCl. Canagliflozin. Canagliflozin is an inhibitor of SGLT2, the transporter responsible for reabsorbing the majority of glucose filtered by the kidney. Canagliflozin is chemically known as (1S)-1,5-anhydro-1-[3-[[5-(4-fluorophenyl)-2-thienyl]methyl]-4-methylphenyl]-D-glucitol hemihydrate and its molecular formula and weight are C24H25FO5S∙1/2 H2O and 453.53, respectively. The structural formula for canagliflozin is. Canagliflozin is practically insoluble in aqueous media from pH 1.1 to 12.9. Metformin HCl. Metformin HCl is a biguanide chemically known as 1,1-Dimethylbiguanide HCl and its molecular formula and weight are C4H11N5 ∙ HCl and 165.62, respectively. The structural formula for metformin HCl is. INVOKAMET and INVOKAMET XR. INVOKAMET or INVOKAMET XR are supplied as film-coated tablets for oral administration. Each 50 mg/500 mg tablet and 50 mg/1,000 mg tablet contains 51 mg of canagliflozin equivalent to 50 mg canagliflozin (anhydrous) and 500 mg or 1,000 mg metformin HCl (equivalent to metformin 389.93 mg and 779.86 mg, respectively). Each 150 mg/500 mg tablet and 150 mg/1,000 mg tablet contains 153 mg of canagliflozin equivalent to 150 mg canagliflozin (anhydrous) and 500 mg or 1,000 mg metformin HCl (equivalent to metformin 389.93 mg and 779.86 mg, respectively). INVOKAMET contains the following inactive ingredients: croscarmellose sodium (E468), hypromellose, magnesium stearate (E572), and microcrystalline cellulose (E460[i]). The magnesium stearate is vegetable-sourced. The tablets are finished with a commercially available film-coating consisting of the following inactive ingredients: macrogol/PEG3350 (E1521), polyvinyl alcohol (E1203) (partially hydrolyzed), talc (E553b), titanium dioxide (E171), iron oxide yellow (E172) (50 mg/1,000 mg and 150 mg/500 mg tablets only), iron oxide red (E172) (50 mg/1,000 mg, 150 mg/500 mg and 150 mg/1,000 mg tablets only), and iron oxide black (E172) (150 mg/1,000 mg tablets only). INVOKAMET XR contains the following inactive ingredients: croscarmellose sodium (E468), hydroxypropyl cellulose (E463), hypromellose, lactose anhydrous, magnesium stearate (E572) (vegetable-sourced), microcrystalline cellulose (E460[i]), polyethylene oxide, and silicified microcrystalline cellulose (50 mg/500 mg and 50 mg/1,000 mg tablets only). The tablets are finished with a commercially available film-coating consisting of the following inactive ingredients: macrogol/PEG3350 (E1521), polyvinyl alcohol (E1203) (partially hydrolyzed), talc (E553b), titanium dioxide (E171), iron oxide red (E172), iron oxide yellow (E172), and iron oxide black (E172) (50 mg/1,000 mg and 150 mg/1,000 mg tablets only). INVOKAMET XR tablets provide canagliflozin for immediate-release and metformin HCl for extended-release. Each bilayer tablet is compressed from two separate granulates, one for each active ingredient of the tablet, and finished with a film-coating. The metformin HCl extended-release layer is based on a polymer matrix which controls the drug release by passive diffusion through the swollen matrix in combination with tablet erosion.</Description>
</NDC>
<NDC>
<NDCCode>55648-941-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (55648-941-01)</PackageDescription>
<NDC11Code>55648-0941-01</NDC11Code>
<ProductNDC>55648-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>55648-941-02</NDCCode>
<PackageDescription>3000 TABLET in 1 BOTTLE (55648-941-02)</PackageDescription>
<NDC11Code>55648-0941-02</NDC11Code>
<ProductNDC>55648-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>55648-941-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (55648-941-03) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55648-0941-03</NDC11Code>
<ProductNDC>55648-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>55648-941-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (55648-941-05)</PackageDescription>
<NDC11Code>55648-0941-05</NDC11Code>
<ProductNDC>55648-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>55648-941-06</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (55648-941-06)</PackageDescription>
<NDC11Code>55648-0941-06</NDC11Code>
<ProductNDC>55648-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet is indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3- phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5.2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>64679-941-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64679-941-01) </PackageDescription>
<NDC11Code>64679-0941-01</NDC11Code>
<ProductNDC>64679-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>64679-941-02</NDCCode>
<PackageDescription>3000 TABLET in 1 BOTTLE (64679-941-02) </PackageDescription>
<NDC11Code>64679-0941-02</NDC11Code>
<ProductNDC>64679-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>64679-941-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-941-03) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0941-03</NDC11Code>
<ProductNDC>64679-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>64679-941-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (64679-941-05) </PackageDescription>
<NDC11Code>64679-0941-05</NDC11Code>
<ProductNDC>64679-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>64679-941-06</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64679-941-06) </PackageDescription>
<NDC11Code>64679-0941-06</NDC11Code>
<ProductNDC>64679-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078402</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older ( 1.1) , 2 Adjunct therapy for heart failure ( 1.2) , 3 Treatment of Acute Myocardial Infarction ( 1.3) .</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21H 31N 3O 52H 2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablet, USP is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg, 5 mg, 10 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate. 20 mg, 30 mg, 40 mg tablets - dibasic calcium phosphate dihydrate, povidone, pregelatinized maize starch, mannitol, colloidal silicon dioxide, corn starch, magnesium stearate, ferric oxide yellow (for 20 mg), ferric oxide red (for 30 mg) and ferric oxide brown (for 40 mg).</Description>
</NDC>
<NDC>
<NDCCode>0078-0424-05</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0078-0424-05) </PackageDescription>
<NDC11Code>00078-0424-05</NDC11Code>
<ProductNDC>0078-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ritalin</ProprietaryName>
<ProprietaryNameSuffix>La</ProprietaryNameSuffix>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020605</StartMarketingDate>
<EndMarketingDate>20261031</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021284</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20020605</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ritalin LA® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), in pediatric patients 6 to 12 years of age [see Clinical Studies (14)]. Limitations of Use. The use of Ritalin LA is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Ritalin LA contains methylphenidate hydrochloride, a CNS stimulant. Ritalin LA extended-release capsules is an extended-release formulation of methylphenidate for oral administration with a bi-modal release profile. Each bead-filled Ritalin LA capsule contains half the dose as immediate-release beads and half as enteric-coated beads, thus providing an immediate release of methylphenidate and a second delayed release of methylphenidate. The active substance in Ritalin LA is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride USP is a white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: ammonio methacrylate copolymer, black iron oxide (10 and 40 mg capsules only), gelatin, methacrylic acid copolymer, polyethylene glycol, red iron oxide (10 and 40 mg capsules only), sugar spheres, talc, titanium dioxide, triethyl citrate, and yellow iron oxide (10, 30, and 40 mg capsules only).</Description>
</NDC>
<NDC>
<NDCCode>0168-0424-46</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0168-0424-46) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>00168-0424-46</NDC11Code>
<ProductNDC>0168-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090824</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene cream is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>0173-0424-00</NDCCode>
<PackageDescription>24 CONTAINER in 1 CARTON (0173-0424-00) > 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00173-0424-00</NDC11Code>
<ProductNDC>0173-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zinacef</ProprietaryName>
<NonProprietaryName>Cefuroxime</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19890501</StartMarketingDate>
<EndMarketingDate>20140228</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050643</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-03-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>0338-0424-18</NDCCode>
<PackageDescription>1 BAG in 1 CARTON (0338-0424-18) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0424-18</NDC11Code>
<ProductNDC>0338-0424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19820428</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018609</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D- glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium in Sodium Chloride Injection is a buffered, sterile, nonpyrogenic solution of Heparin Sodium, USP derived from porcine intestinal mucosa, standardized for anticoagulant activity supplied in single dose containers for vascular administration. It contains no antimicrobial agents. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Composition, osmolarity, pH and ionic concentration are shown in Table 1. This VIAFLEX PLUS plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX PLUS on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX PLUS plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0363-0424-05</NDCCode>
<PackageDescription>3 CONTAINER in 1 CARTON (0363-0424-05) / 24 LOZENGE in 1 CONTAINER</PackageDescription>
<NDC11Code>00363-0424-05</NDC11Code>
<ProductNDC>0363-0424</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100112</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090821</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
</NDCList>