{
"NDC": [
{
"NDCCode": "0990-7171-17",
"PackageDescription": "6 POUCH in 1 CASE (0990-7171-17) / 1 BAG in 1 POUCH / 2000 mL in 1 BAG",
"NDC11Code": "00990-7171-17",
"ProductNDC": "0990-7171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn Ii",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020041",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; ACETYL L-TYROSINE; GLYCINE",
"StrengthNumber": "990; 1500; 1575; 258; 447; 600; 300; 750; 1490; 1527; 1050; 1107; 450; 1083; 795; 405; 750",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn II, Sulfite-Free, (an amino acid injection) infused with dextrose by peripheral vein infusion is indicated as a source of nitrogen in the nutritional support of patients with adequate stores of body fat, in whom, for short periods of time, oral nutrition cannot be tolerated, is undesirable, or inadequate. SUPPLEMENTAL ELECTROLYTES, IN ACCORDANCE WITH THE PRESCRIPTION OF THE ATTENDING PHYSICIAN, MUST BE ADDED TO AMINOSYN II SOLUTIONS WITHOUT ELECTROLYTES. Aminosyn II can be administered peripherally with dilute (5 to 10%) dextrose solution and I.V. fat emulsion as a source of nutritional support. This form of nutritional support can help to preserve protein and reduce catabolism in stress conditions where oral intake is inadequate. Aminosyn II is also indicated for central vein infusion to prevent or reverse negative nitrogen balance in patients where the alimentary tract, by the oral, gastrostomy or jejunostomy route cannot or should not be used and gastrointestinal absorption of protein is impaired.",
"Description": "Aminosyn II, Sulfite-Free, (an amino acid injection) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn II is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulations are described below. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The formulas for the individual amino acids are as follows. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture."
},
{
"NDCCode": "0409-7171-17",
"PackageDescription": "6 POUCH in 1 CASE (0409-7171-17) > 1 BAG in 1 POUCH > 2000 mL in 1 BAG",
"NDC11Code": "00409-7171-17",
"ProductNDC": "0409-7171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn Ii",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19911219",
"EndMarketingDate": "20231201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020041",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; N-ACETYLTYROSINE; PHENYLALANINE; PROLINE; SERINE; THREONINE; TRYPTOPHAN; VALINE",
"StrengthNumber": "1490; 1527; 1050; 1107; 750; 450; 990; 1500; 1575; 258; 405; 447; 1083; 795; 600; 300; 750",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19911219",
"EndMarketingDatePackage": "20231201",
"SamplePackage": "N"
},
{
"NDCCode": "0990-7172-17",
"PackageDescription": "6 POUCH in 1 CASE (0990-7172-17) / 1 BAG in 1 POUCH / 2000 mL in 1 BAG",
"NDC11Code": "00990-7172-17",
"ProductNDC": "0990-7172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn Ii",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020015",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; ACETYL L-TYROSINE; GLYCINE",
"StrengthNumber": "660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn II, Sulfite-Free, (an amino acid injection) infused with dextrose by peripheral vein infusion is indicated as a source of nitrogen in the nutritional support of patients with adequate stores of body fat, in whom, for short periods of time, oral nutrition cannot be tolerated, is undesirable, or inadequate. SUPPLEMENTAL ELECTROLYTES, IN ACCORDANCE WITH THE PRESCRIPTION OF THE ATTENDING PHYSICIAN, MUST BE ADDED TO AMINOSYN II SOLUTIONS WITHOUT ELECTROLYTES. Aminosyn II can be administered peripherally with dilute (5 to 10%) dextrose solution and I.V. fat emulsion as a source of nutritional support. This form of nutritional support can help to preserve protein and reduce catabolism in stress conditions where oral intake is inadequate. Aminosyn II is also indicated for central vein infusion to prevent or reverse negative nitrogen balance in patients where the alimentary tract, by the oral, gastrostomy or jejunostomy route cannot or should not be used and gastrointestinal absorption of protein is impaired.",
"Description": "Aminosyn II, Sulfite-Free, (an amino acid injection) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn II is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulations are described below. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The formulas for the individual amino acids are as follows. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture."
},
{
"NDCCode": "71872-7171-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7171-1) / 1 mL in 1 VIAL",
"NDC11Code": "71872-7171-01",
"ProductNDC": "71872-7171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE",
"StartMarketingDate": "19750715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084282",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190627",
"SamplePackage": "N",
"IndicationAndUsage": "A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and management. B. Intra-articular or soft tissue administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intra-articular or soft tissue administration are indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Synovitis of osteoarthritis. Rheumatoid arthritis. Acute and subacute bursitis. Acute gouty arthritis. Epicondylitis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. C. Intralesional administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intralesional administration are indicated for:. Keloids. Localized hypertrophic, infiltrated, inflammatory lesions of: lichen planus, psoriatic plaques, granuloma annulare, and lichen simplex chronicus (neurodermatitis). Discoid lupus erythematosus. Necrobiosis lipoidica diabeticorum. Alopecia areata. They also may be useful in cystic tumors of an aponeurosis tendon (ganglia).",
"Description": "Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3, 20-dione disodium salt. The molecular formula is: C 22H 28FNa 2O 8P and the structural formula is:. Dexamethasone Sodium Phosphate Injection is a sterile solution of dexamethasone sodium phosphate for intravenous and intramuscular use. The 4 mg/mL strength may also be used for intra-articular, intralesional and soft tissue administration. Each mL of Dexamethasone Sodium Phosphate Injection 4 mg/mL contains dexamethasone sodium phosphate, equivalent to 4 mg dexamethasone phosphate or 3.33 mg dexamethasone. Inactive ingredients per mL: 1 mg sodium sulfite anhydrous, 19.4 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. Each mL of Dexamethasone Sodium Phosphate Injection 10 mg/mL contains dexamethasone sodium phosphate, equivalent to 10 mg dexamethasone phosphate or 8.33 mg dexamethasone. Inactive ingredients per mL: 1.5 mg sodium sulfite anhydrous, 16.5 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. The pH of both concentrations is 7.0-8.5; sodium hydroxide and/or citric acid used, if needed, for pH adjustment. Sealed under nitrogen."
},
{
"NDCCode": "0990-7918-19",
"PackageDescription": "12 POUCH in 1 CASE (0990-7918-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7918-19",
"ProductNDC": "0990-7918",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018561",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "70",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0990-7922-02",
"PackageDescription": "24 POUCH in 1 CASE (0990-7922-02) / 1 BAG in 1 POUCH / 250 mL in 1 BAG",
"NDC11Code": "00990-7922-02",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7922-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7922-03",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-09",
"PackageDescription": "12 POUCH in 1 CASE (0990-7922-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG",
"NDC11Code": "00990-7922-09",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190901",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-53",
"PackageDescription": "24 POUCH in 1 CASE (0990-7922-53) / 1 BAG in 1 POUCH / 250 mL in 1 BAG",
"NDC11Code": "00990-7922-53",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-55",
"PackageDescription": "18 POUCH in 1 CASE (0990-7922-55) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7922-55",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-61",
"PackageDescription": "32 POUCH in 1 CASE (0990-7922-61) / 1 BAG in 1 POUCH / 150 mL in 1 BAG",
"NDC11Code": "00990-7922-61",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7923-13",
"PackageDescription": "48 POUCH in 1 CASE (0990-7923-13) / 1 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "00990-7923-13",
"ProductNDC": "0990-7923",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7923-20",
"PackageDescription": "12 POUCH in 1 CASE (0990-7923-20) / 4 BAG in 1 POUCH / 25 mL in 1 BAG",
"NDC11Code": "00990-7923-20",
"ProductNDC": "0990-7923",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7923-23",
"PackageDescription": "48 POUCH in 1 CASE (0990-7923-23) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "00990-7923-23",
"ProductNDC": "0990-7923",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7923-36",
"PackageDescription": "20 POUCH in 1 CASE (0990-7923-36) / 4 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "00990-7923-36",
"ProductNDC": "0990-7923",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190715",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7923-37",
"PackageDescription": "20 POUCH in 1 CASE (0990-7923-37) / 4 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "00990-7923-37",
"ProductNDC": "0990-7923",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190715",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7930-02",
"PackageDescription": "24 POUCH in 1 CASE (0990-7930-02) / 1 BAG in 1 POUCH / 250 mL in 1 BAG",
"NDC11Code": "00990-7930-02",
"ProductNDC": "0990-7930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018080",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7930-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7930-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7930-03",
"ProductNDC": "0990-7930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018080",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7930-09",
"PackageDescription": "12 POUCH in 1 CASE (0990-7930-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG",
"NDC11Code": "00990-7930-09",
"ProductNDC": "0990-7930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018080",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7935-19",
"PackageDescription": "12 POUCH in 1 CASE (0990-7935-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7935-19",
"ProductNDC": "0990-7935",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018564",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0990-7936-19",
"PackageDescription": "12 POUCH in 1 CASE (0990-7936-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7936-19",
"ProductNDC": "0990-7936",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018563",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0990-7937-19",
"PackageDescription": "12 POUCH in 1 CASE (0990-7937-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7937-19",
"ProductNDC": "0990-7937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018562",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0990-8004-15",
"PackageDescription": "12 POUCH in 1 CASE (0990-8004-15) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-8004-15",
"ProductNDC": "0990-8004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019345",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "30",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "16590-990-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (16590-990-30)",
"NDC11Code": "16590-0990-30",
"ProductNDC": "16590-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19730618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083365",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .",
"Description": "Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate."
},
{
"NDCCode": "16590-990-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (16590-990-60)",
"NDC11Code": "16590-0990-60",
"ProductNDC": "16590-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19730618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083365",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .",
"Description": "Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate."
},
{
"NDCCode": "16590-990-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (16590-990-90)",
"NDC11Code": "16590-0990-90",
"ProductNDC": "16590-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19730618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083365",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .",
"Description": "Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate."
},
{
"NDCCode": "49967-990-01",
"PackageDescription": "30 mL in 1 TUBE (49967-990-01) ",
"NDC11Code": "49967-0990-01",
"ProductNDC": "49967-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nyx Professional Makeup Blurscreen Primer Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate And Octocrylene",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "L'Oreal USA Products Inc",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 73; 50; 100",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "49967-990-02",
"PackageDescription": "2 mL in 1 PACKAGE (49967-990-02) ",
"NDC11Code": "49967-0990-02",
"ProductNDC": "49967-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nyx Professional Makeup Blurscreen Primer Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate And Octocrylene",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "L'Oreal USA Products Inc",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 73; 50; 100",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240401",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "50241-990-02",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (50241-990-02) > 3.80564 kg in 1 BOTTLE, PLASTIC (50241-990-01) ",
"NDC11Code": "50241-0990-02",
"ProductNDC": "50241-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fresh Hands",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180916",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Morgan Gallacher Inc. DBA Custom Chemical Formulators Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "13",
"StrengthUnit": "kg/100kg",
"Status": "Deprecated",
"LastUpdate": "2020-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180917",
"SamplePackage": "N"
},
{
"NDCCode": "50474-990-80",
"PackageDescription": "4 CARTON in 1 BOX (50474-990-80) / 7 SYRINGE, GLASS in 1 CARTON / .416 mL in 1 SYRINGE, GLASS",
"NDC11Code": "50474-0990-80",
"ProductNDC": "50474-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zilbrysq",
"NonProprietaryName": "Zilucoplan",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216834",
"LabelerName": "UCB, Inc.",
"SubstanceName": "ZILUCOPLAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Complement Inhibitor [EPC], Complement Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240315",
"SamplePackage": "N",
"IndicationAndUsage": "ZILBRYSQ is indicated for the treatment of generalized myasthenia gravis (gMG) in adult patients who are anti-acetylcholine receptor (AChR) antibody positive.",
"Description": "Zilucoplan, a complement inhibitor, is a 15 amino-acid, synthetic macrocyclic peptide. The molecular formula of zilucoplan is C 172H 278N 24O 55in free acid form and its molecular weight is 3562.23 Daltons (free acid form). The chemical name for zilucoplan sodium is: acetyl‐[L-lysyl 1-L-valyl 2-L-glutamyl 3-L-arginyl 4-L phenylalanyl 5-L aspartyl 6]- N-methyl L-aspartyl 7-L tert-leucyl 8-L tyrosyl 9-L-7-azatryptophyl 10-L glutamyl 11-L-tyrosyl 12-L prolyl 13-L cyclohexylglycyl 14-[L-lysyl 15, Nε-palmitoyl-γ-L-glutamyl-(1-amino-3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57,60,63,66,69,72-tetracosaoxapentaheptacontan-75-oyl)], cyclic (Lactam 1-6), tetra sodium. The primary structure for zilucoplan sodium is shown below. ZILBRYSQ injection is a sterile, clear to slightly opalescent, colorless, preservative-free, buffered solution of zilucoplan (as zilucoplan sodium) for subcutaneous injection, in single-dose prefilled syringes. The solution pH is between 6.5 and 7.5. ZILBRYSQ is supplied in three dose strengths containing 16.6 mg /0.416 mL, 23 mg /0.574 mL, and 32.4 mg/0.81 mL of zilucoplan free acid equivalent to 17 mg, 23.6 mg, and 33.2 mg of zilucoplan sodium, respectively. Additionally, each mL of the solution contains dibasic sodium phosphate, anhydrous (4.11 mg); monobasic sodium phosphate, monohydrate (2.9 mg); sodium chloride (4.42 mg); and water for injection."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0990-7171-17</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (0990-7171-17) / 1 BAG in 1 POUCH / 2000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7171-17</NDC11Code>
<ProductNDC>0990-7171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn Ii</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020041</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; ACETYL L-TYROSINE; GLYCINE</SubstanceName>
<StrengthNumber>990; 1500; 1575; 258; 447; 600; 300; 750; 1490; 1527; 1050; 1107; 450; 1083; 795; 405; 750</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn II, Sulfite-Free, (an amino acid injection) infused with dextrose by peripheral vein infusion is indicated as a source of nitrogen in the nutritional support of patients with adequate stores of body fat, in whom, for short periods of time, oral nutrition cannot be tolerated, is undesirable, or inadequate. SUPPLEMENTAL ELECTROLYTES, IN ACCORDANCE WITH THE PRESCRIPTION OF THE ATTENDING PHYSICIAN, MUST BE ADDED TO AMINOSYN II SOLUTIONS WITHOUT ELECTROLYTES. Aminosyn II can be administered peripherally with dilute (5 to 10%) dextrose solution and I.V. fat emulsion as a source of nutritional support. This form of nutritional support can help to preserve protein and reduce catabolism in stress conditions where oral intake is inadequate. Aminosyn II is also indicated for central vein infusion to prevent or reverse negative nitrogen balance in patients where the alimentary tract, by the oral, gastrostomy or jejunostomy route cannot or should not be used and gastrointestinal absorption of protein is impaired.</IndicationAndUsage>
<Description>Aminosyn II, Sulfite-Free, (an amino acid injection) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn II is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulations are described below. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The formulas for the individual amino acids are as follows. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture.</Description>
</NDC>
<NDC>
<NDCCode>0409-7171-17</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (0409-7171-17) > 1 BAG in 1 POUCH > 2000 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-7171-17</NDC11Code>
<ProductNDC>0409-7171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn Ii</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19911219</StartMarketingDate>
<EndMarketingDate>20231201</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020041</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; N-ACETYLTYROSINE; PHENYLALANINE; PROLINE; SERINE; THREONINE; TRYPTOPHAN; VALINE</SubstanceName>
<StrengthNumber>1490; 1527; 1050; 1107; 750; 450; 990; 1500; 1575; 258; 405; 447; 1083; 795; 600; 300; 750</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19911219</StartMarketingDatePackage>
<EndMarketingDatePackage>20231201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0990-7172-17</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (0990-7172-17) / 1 BAG in 1 POUCH / 2000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7172-17</NDC11Code>
<ProductNDC>0990-7172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn Ii</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyltyrosine, And Glycine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020015</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; ACETYL L-TYROSINE; GLYCINE</SubstanceName>
<StrengthNumber>660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn II, Sulfite-Free, (an amino acid injection) infused with dextrose by peripheral vein infusion is indicated as a source of nitrogen in the nutritional support of patients with adequate stores of body fat, in whom, for short periods of time, oral nutrition cannot be tolerated, is undesirable, or inadequate. SUPPLEMENTAL ELECTROLYTES, IN ACCORDANCE WITH THE PRESCRIPTION OF THE ATTENDING PHYSICIAN, MUST BE ADDED TO AMINOSYN II SOLUTIONS WITHOUT ELECTROLYTES. Aminosyn II can be administered peripherally with dilute (5 to 10%) dextrose solution and I.V. fat emulsion as a source of nutritional support. This form of nutritional support can help to preserve protein and reduce catabolism in stress conditions where oral intake is inadequate. Aminosyn II is also indicated for central vein infusion to prevent or reverse negative nitrogen balance in patients where the alimentary tract, by the oral, gastrostomy or jejunostomy route cannot or should not be used and gastrointestinal absorption of protein is impaired.</IndicationAndUsage>
<Description>Aminosyn II, Sulfite-Free, (an amino acid injection) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn II is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulations are described below. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The formulas for the individual amino acids are as follows. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture.</Description>
</NDC>
<NDC>
<NDCCode>71872-7171-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7171-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7171-01</NDC11Code>
<ProductNDC>71872-7171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
<StartMarketingDate>19750715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084282</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and management. B. Intra-articular or soft tissue administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intra-articular or soft tissue administration are indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Synovitis of osteoarthritis. Rheumatoid arthritis. Acute and subacute bursitis. Acute gouty arthritis. Epicondylitis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. C. Intralesional administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intralesional administration are indicated for:. Keloids. Localized hypertrophic, infiltrated, inflammatory lesions of: lichen planus, psoriatic plaques, granuloma annulare, and lichen simplex chronicus (neurodermatitis). Discoid lupus erythematosus. Necrobiosis lipoidica diabeticorum. Alopecia areata. They also may be useful in cystic tumors of an aponeurosis tendon (ganglia).</IndicationAndUsage>
<Description>Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3, 20-dione disodium salt. The molecular formula is: C 22H 28FNa 2O 8P and the structural formula is:. Dexamethasone Sodium Phosphate Injection is a sterile solution of dexamethasone sodium phosphate for intravenous and intramuscular use. The 4 mg/mL strength may also be used for intra-articular, intralesional and soft tissue administration. Each mL of Dexamethasone Sodium Phosphate Injection 4 mg/mL contains dexamethasone sodium phosphate, equivalent to 4 mg dexamethasone phosphate or 3.33 mg dexamethasone. Inactive ingredients per mL: 1 mg sodium sulfite anhydrous, 19.4 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. Each mL of Dexamethasone Sodium Phosphate Injection 10 mg/mL contains dexamethasone sodium phosphate, equivalent to 10 mg dexamethasone phosphate or 8.33 mg dexamethasone. Inactive ingredients per mL: 1.5 mg sodium sulfite anhydrous, 16.5 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. The pH of both concentrations is 7.0-8.5; sodium hydroxide and/or citric acid used, if needed, for pH adjustment. Sealed under nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0990-7918-19</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7918-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7918-19</NDC11Code>
<ProductNDC>0990-7918</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018561</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-02</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7922-02) / 1 BAG in 1 POUCH / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-02</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7922-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-03</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-09</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7922-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-09</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-53</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7922-53) / 1 BAG in 1 POUCH / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-53</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-55</NDCCode>
<PackageDescription>18 POUCH in 1 CASE (0990-7922-55) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-55</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-61</NDCCode>
<PackageDescription>32 POUCH in 1 CASE (0990-7922-61) / 1 BAG in 1 POUCH / 150 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-61</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7923-13</NDCCode>
<PackageDescription>48 POUCH in 1 CASE (0990-7923-13) / 1 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7923-13</NDC11Code>
<ProductNDC>0990-7923</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7923-20</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7923-20) / 4 BAG in 1 POUCH / 25 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7923-20</NDC11Code>
<ProductNDC>0990-7923</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7923-23</NDCCode>
<PackageDescription>48 POUCH in 1 CASE (0990-7923-23) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7923-23</NDC11Code>
<ProductNDC>0990-7923</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7923-36</NDCCode>
<PackageDescription>20 POUCH in 1 CASE (0990-7923-36) / 4 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7923-36</NDC11Code>
<ProductNDC>0990-7923</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7923-37</NDCCode>
<PackageDescription>20 POUCH in 1 CASE (0990-7923-37) / 4 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7923-37</NDC11Code>
<ProductNDC>0990-7923</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7930-02</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7930-02) / 1 BAG in 1 POUCH / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7930-02</NDC11Code>
<ProductNDC>0990-7930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018080</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7930-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7930-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7930-03</NDC11Code>
<ProductNDC>0990-7930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018080</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7930-09</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7930-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7930-09</NDC11Code>
<ProductNDC>0990-7930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018080</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7935-19</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7935-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7935-19</NDC11Code>
<ProductNDC>0990-7935</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018564</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0990-7936-19</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7936-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7936-19</NDC11Code>
<ProductNDC>0990-7936</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018563</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0990-7937-19</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7937-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7937-19</NDC11Code>
<ProductNDC>0990-7937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018562</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0990-8004-15</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-8004-15) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-8004-15</NDC11Code>
<ProductNDC>0990-8004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019345</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection 20%, 30%, 40%, 50% and 70%, mixed with amino acids or other compatible intravenous fluids, is indicated as a source of calories for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Dextrose Injection, USP 20%, 30%, 40%, 50% and 70% are sterile, nonpyrogenic, hypertonic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after appropriate admixture or dilution [see Dosage and Administration (2.1)]. Partial-fill containers, designed to facilitate admixture or dilution to provide dextrose in various concentrations, are available in various sizes. See Table 1 for the content and characteristics of these concentrated solutions. The solutions contain no bacteriostatic, antimicrobial agent or added buffer and are intended only for use as a single-dose injection following admixture or dilution. The pH is 4.3 (range is 3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Dextrose may be derived from corn. Water for Injection, USP is chemically designated H2O. Dextrose Injection contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>16590-990-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (16590-990-30)</PackageDescription>
<NDC11Code>16590-0990-30</NDC11Code>
<ProductNDC>16590-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19730618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083365</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .</IndicationAndUsage>
<Description>Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate.</Description>
</NDC>
<NDC>
<NDCCode>16590-990-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (16590-990-60)</PackageDescription>
<NDC11Code>16590-0990-60</NDC11Code>
<ProductNDC>16590-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19730618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083365</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .</IndicationAndUsage>
<Description>Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate.</Description>
</NDC>
<NDC>
<NDCCode>16590-990-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (16590-990-90)</PackageDescription>
<NDC11Code>16590-0990-90</NDC11Code>
<ProductNDC>16590-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19730618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083365</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Endocrine Disorders Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer . Rheumatic Disorders As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy): Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis or osteoarthritis Epicondylitis . Collagen Diseases During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Acute rheumatic carditis Systemic dermatomyositis (polymyositis) . Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis . Allergic States Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions . Ophthalmic Diseases Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: Allergic conjunctivitis Keratitis Allergic corneal marginal ulcers Herpes zoster ophthalmicus Iritis and iridocyclitis Chorioretinitis Anterior segment inflammation Diffuse posterior uveitis and choroiditis Optic neuritis Sympathetic ophthalmia . Respiratory Disease Symptomatic sarcoidosis Loeffler's syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculosis chemotherapy Aspiration pneumonitis . Hematologic Disorder Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia . Neoplastic Disease For palliative management of: Leukemias and lymphomas in adults Acute leukemia of childhood . Edematous States To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus . Gastrointestinal Diseases To tide the patient over a critical period of the disease in: Ulcerative colitis Regional enteritis . Miscellaneous Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement .</IndicationAndUsage>
<Description>Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone is a white to practically white, odorless, crystalline powder, very slightly soluble in water. The molecular weight is 362.47. It is designated chemically as 11B, 17,21-trihydroxy-pregn-4-ene-3,20-dione. The molecular formula is C21H30O5 and the structural formula is. Hydrocortisone is believed to be the principal hormone secreted by the adrenal cortex. Each tablet for oral administration contains 20 mg of hydrocortisone. Inactive Ingredients: Anhydrous Lactose, Colloidal Silicon Dioxide, Magnesium Stearate, Microcrystalline Cellulose, and Sodium Starch Glycolate.</Description>
</NDC>
<NDC>
<NDCCode>49967-990-01</NDCCode>
<PackageDescription>30 mL in 1 TUBE (49967-990-01) </PackageDescription>
<NDC11Code>49967-0990-01</NDC11Code>
<ProductNDC>49967-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nyx Professional Makeup Blurscreen Primer Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate And Octocrylene</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>L'Oreal USA Products Inc</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 73; 50; 100</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49967-990-02</NDCCode>
<PackageDescription>2 mL in 1 PACKAGE (49967-990-02) </PackageDescription>
<NDC11Code>49967-0990-02</NDC11Code>
<ProductNDC>49967-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nyx Professional Makeup Blurscreen Primer Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate And Octocrylene</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>L'Oreal USA Products Inc</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 73; 50; 100</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50241-990-02</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (50241-990-02) > 3.80564 kg in 1 BOTTLE, PLASTIC (50241-990-01) </PackageDescription>
<NDC11Code>50241-0990-02</NDC11Code>
<ProductNDC>50241-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fresh Hands</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180916</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Morgan Gallacher Inc. DBA Custom Chemical Formulators Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>13</StrengthNumber>
<StrengthUnit>kg/100kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50474-990-80</NDCCode>
<PackageDescription>4 CARTON in 1 BOX (50474-990-80) / 7 SYRINGE, GLASS in 1 CARTON / .416 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>50474-0990-80</NDC11Code>
<ProductNDC>50474-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zilbrysq</ProprietaryName>
<NonProprietaryName>Zilucoplan</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216834</ApplicationNumber>
<LabelerName>UCB, Inc.</LabelerName>
<SubstanceName>ZILUCOPLAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Complement Inhibitor [EPC], Complement Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZILBRYSQ is indicated for the treatment of generalized myasthenia gravis (gMG) in adult patients who are anti-acetylcholine receptor (AChR) antibody positive.</IndicationAndUsage>
<Description>Zilucoplan, a complement inhibitor, is a 15 amino-acid, synthetic macrocyclic peptide. The molecular formula of zilucoplan is C 172H 278N 24O 55in free acid form and its molecular weight is 3562.23 Daltons (free acid form). The chemical name for zilucoplan sodium is: acetyl‐[L-lysyl 1-L-valyl 2-L-glutamyl 3-L-arginyl 4-L phenylalanyl 5-L aspartyl 6]- N-methyl L-aspartyl 7-L tert-leucyl 8-L tyrosyl 9-L-7-azatryptophyl 10-L glutamyl 11-L-tyrosyl 12-L prolyl 13-L cyclohexylglycyl 14-[L-lysyl 15, Nε-palmitoyl-γ-L-glutamyl-(1-amino-3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57,60,63,66,69,72-tetracosaoxapentaheptacontan-75-oyl)], cyclic (Lactam 1-6), tetra sodium. The primary structure for zilucoplan sodium is shown below. ZILBRYSQ injection is a sterile, clear to slightly opalescent, colorless, preservative-free, buffered solution of zilucoplan (as zilucoplan sodium) for subcutaneous injection, in single-dose prefilled syringes. The solution pH is between 6.5 and 7.5. ZILBRYSQ is supplied in three dose strengths containing 16.6 mg /0.416 mL, 23 mg /0.574 mL, and 32.4 mg/0.81 mL of zilucoplan free acid equivalent to 17 mg, 23.6 mg, and 33.2 mg of zilucoplan sodium, respectively. Additionally, each mL of the solution contains dibasic sodium phosphate, anhydrous (4.11 mg); monobasic sodium phosphate, monohydrate (2.9 mg); sodium chloride (4.42 mg); and water for injection.</Description>
</NDC>
</NDCList>