{
"NDC": [
{
"NDCCode": "0990-7902-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7902-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7902-03",
"ProductNDC": "0990-7902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018362",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 1.49; 4.5",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200201",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See Tables for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7902-09",
"PackageDescription": "12 POUCH in 1 CASE (0990-7902-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG",
"NDC11Code": "00990-7902-09",
"ProductNDC": "0990-7902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018362",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 1.49; 4.5",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200201",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See Tables for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0409-7902-03",
"PackageDescription": "24 POUCH in 1 CASE (0409-7902-03) > 1 BAG in 1 POUCH > 500 mL in 1 BAG",
"NDC11Code": "00409-7902-03",
"ProductNDC": "0409-7902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050131",
"EndMarketingDate": "20210801",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018362",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; 1.49",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20050228",
"EndMarketingDatePackage": "20210201",
"SamplePackage": "N"
},
{
"NDCCode": "63629-7902-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (63629-7902-3) ",
"NDC11Code": "63629-7902-03",
"ProductNDC": "63629-7902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204319",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220901",
"SamplePackage": "N",
"IndicationAndUsage": ". Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 2 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2)Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2)Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 3 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 4 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2)Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated. .",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 micromol), 5 mg (16 micromol), 7.5 mg (24 micromol), 10 mg (32 micromol), 15 mg (48 micromol), or 20 mg (64 micromol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry ® 03A18286 (Hypromellose, Titanium Dioxide and Sodium Lauryl Sulfate) for 2.5 mg, 5 mg, 7.5 mg and 10 mg tablets, Opadry ® 03A605003 (Hypromellose, Titanium Dioxide, FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake) for 15 mg tablets and Opadry ® 03A640001 (Hypromellose, Titanium Dioxide, Talc and Iron Oxide Red) for 20 mg tablets."
},
{
"NDCCode": "0409-7902-09",
"PackageDescription": "12 POUCH in 1 CASE (0409-7902-09) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG",
"NDC11Code": "00409-7902-09",
"ProductNDC": "0409-7902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050131",
"EndMarketingDate": "20210801",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018362",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; 1.49",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20050131",
"EndMarketingDatePackage": "20210801",
"SamplePackage": "N"
},
{
"NDCCode": "0990-4178-03",
"PackageDescription": "12 BAG in 1 CASE (0990-4178-03) / 500 mL in 1 BAG",
"NDC11Code": "00990-4178-03",
"ProductNDC": "0990-4178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn-pf",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019398",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE",
"StrengthNumber": "490; 861; 370; 576; 270; 220; 534; 831; 475; 125; 300; 570; 347; 50; 360; 125; 44; 452",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211001",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 7% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes, (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.",
"Description": "Aminosyn®-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn®-PF 7% is oxygen sensitive. The formulation is described below. * Amount cited is for lysine alone and does not include the acetate salt. a From lysine acetate. The formulas for the individual amino acids present in Aminosyn-PF 7% are as follows. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-6138-03",
"PackageDescription": "24 BOTTLE, PLASTIC in 1 CASE (0990-6138-03) / 500 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00990-6138-03",
"ProductNDC": "0990-6138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20190801",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017514",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "900",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191001",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Each of these solutions is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.",
"Description": "These products are sterile, nonpyrogenic solutions of electrolytes in water for injection intended only for sterile irrigation, washing, rinsing and dilution purposes. Each 100 mL of 0.9% Sodium Chloride Irrigation, USP contains: Sodium chloride 900 mg; pH 5.6 (4.5 to 7.0). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The solution is isotonic (308 mOsmol/liter, CALC.) and has the following electrolyte content (mEq/liter): Na+ 154; Cl− 154. These irrigations contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Each of these irrigations may be classified as a sterile irrigant, wash, rinse, diluent and pharmaceutical vehicle. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The container requires no vapor barrier to maintain the proper drug concentration. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-6139-03",
"PackageDescription": "24 BOTTLE, PLASTIC in 1 CASE (0990-6139-03) / 500 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00990-6139-03",
"ProductNDC": "0990-6139",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20190801",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017513",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190901",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Sterile Water for Irrigation, USP is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of sterile, nonpyrogenic, solute-free water.",
"Description": "Sterile Water for Irrigation, USP is a sterile, distilled, nonpyrogenic water for injection intended only for sterile irrigation, washing, rinsing and dilution purposes. pH 5.5 (5.0 to 7.0). Sterile Water for Irrigation, USP contains no bacteriostat, antimicrobial agent or added buffer and is intended for use only as a single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Sterile Water for Irrigation, USP may be classified as a sterile irrigant, wash, rinse, diluent and pharmaceutical vehicle. Water for Irrigation, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The container requires no vapor barrier to maintain the proper drug concentration. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7372-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7372-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7372-03",
"ProductNDC": "0990-7372",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ionosol Mb And Dextrose",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019513",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM LACTATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; MONOBASIC POTASSIUM PHOSPHATE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": "5; 30; 15; 141; 260; 25",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. In adults, Ionosol MB and 5% Dextrose Injection is indicated postoperatively for intravenous fluid and electrolyte maintenance therapy, with a small amount of carbohydrate calories for reducing catabolism of endogenous protein reserves.",
"Description": "Ionosol MB and 5% Dextrose Injection (Multiple Electrolytes and 5% Dextrose Injection Type 1, USP) is a sterile, nonpyrogenic solution designed for intravenous administration. The solution is formulated to provide fluid and electrolytes for treatment of dehydration and acidosis. Each 100 mL contains dextrose, hydrous 5 g; sodium lactate, anhydrous 260 mg; potassium chloride 141 mg; magnesium chloride, hexahydrate 30 mg; monobasic potassium phosphate, anhydrous 15 mg; and monobasic sodium phosphate, monohydrate 25 mg. Each liter contains 25 mEq sodium (Na+); 20 mEq potassium (K+); 3 mEq magnesium (Mg++); 22 mEq chloride (Cl¯); 3 mM of phosphate (PO4≡); and 23 mEq lactate (CH3CH(OH)COO¯). The electrolyte content is hypotonic (100 mOsmol/L) in relation to the extracellular fluid (1pprox.. 280 mOsmol/L). The osmolarity for the total solution is 352 mOsmol/L (calc.). May contain hydrochloric acid for pH adjustment. pH is 5.0 (4.0 to 6.5). Dextrose, USP, hydrous is chemically designated C6H12O6 H2O (D-glucose, monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula:. Magnesium Chloride, USP, hexahydrate is chemically designated MgCl2 6H2O, colorless flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Monobasic Potassium Phosphate, NF, anhydrous is chemically designated KH2PO4, colorless crystals or white granular powder freely soluble in water. Sodium Lactate, USP is chemically designated CH3CH(OH)COONa, a 60% aqueous solution miscible in water. Monobasic Sodium Phosphate, USP, monohydrate is chemically designated NaH2PO4 H2O, white crystals or granules freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0990-7670-03",
"PackageDescription": "24 BAG in 1 CASE (0990-7670-03) / 500 mL in 1 BAG",
"NDC11Code": "00990-7670-03",
"ProductNDC": "0990-7670",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Normosol-r",
"NonProprietaryName": "Sodium Chloride, Sodium Acetate Anhydrous, Sodium Gluconate, Potassium Chloride, And Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017586",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM ACETATE ANHYDROUS; SODIUM GLUCONATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "30; 37; 222; 526; 502",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191231",
"SamplePackage": "N",
"IndicationAndUsage": "Normosol-R pH 7.4 is indicated for replacement of acute extracellular fluid volume losses in surgery, trauma, burns or shock. Normosol-R pH 7.4 also can be used as an adjunct to restore a decrease in circulatory volume in patients with moderate blood loss. Normosol-R pH 7.4 is not intended to supplant transfusion of whole blood or packed red cells in the presence of uncontrolled hemorrhage or severe reductions of red cell volume. Normosol-R pH 7.4 is particularly valuable as a solution for use in starting blood, i.e., as a priming solution for the infusion set. No hemolysis of blood is seen at the interface or with mixed solution and blood. It may also be used as a diluent to aid in the transfusion of packed red blood cells (PRBC). Normosol-R pH 7.4 and physiologic saline solution (0.9% Sodium Chloride Injection, USP) are compatible with both young and old PRBC.",
"Description": "Normosol®-R pH 7.4 is a sterile, nonpyrogenic, isotonic solution of balanced electrolytes in water for injection. The solution is administered by intravenous infusion for parenteral replacement of acute losses of extracellular fluid. Each 100 mL of Normosol-R pH 7.4 contains sodium chloride, 526 mg; sodium acetate, 222 mg; sodium gluconate, 502 mg; potassium chloride, 37 mg; magnesium chloride, hexahydrate 30 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH range 6.5 to 7.6; 295 mOsmol/liter (calc.). Electrolytes per 1000 mL (not including pH adjustment): Sodium 140 mEq; potassium 5 mEq; magnesium 3 mEq; chloride 98 mEq; acetate 27 mEq; gluconate 23 mEq. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-R pH 7.4 is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride, hexahydrate (MgCl2 6H2O) deliquescent crystals very soluble in water. Sodium Acetate, USP is chemically designated sodium acetate, anhydrous (C2H3NaO2), a hygroscopic powder soluble in water. It has the following structural formula. Sodium gluconate is chemically designated C6H11NaO7, the normal sodium salt of gluconic acid soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7715-03",
"PackageDescription": "12 POUCH in 1 CASE (0990-7715-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0990-7715-13) ",
"NDC11Code": "00990-7715-03",
"ProductNDC": "0990-7715",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mannitol",
"NonProprietaryName": "Mannitol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019603",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "MANNITOL",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Diuresis [PE], Osmotic Activity [MoA], Osmotic Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190531",
"SamplePackage": "N",
"IndicationAndUsage": "Mannitol Injection is indicated for the reduction of: 1 intracranial pressure and treatment of cerebral edema;, 2 elevated intraocular pressure.",
"Description": "Mannitol Injection, USP is a sterile, nonpyrogenic solution of mannitol in water for injection available in a concentration of 20% in flexible plastic containers. The content and characteristics of the available concentration is as follows. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Mannitol Injection, USP is an osmotic diuretic for intravenous administration. Mannitol, USP is chemically designated D-mannitol (C6H14O6), a white crystalline powder or free-flowing granules freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap, but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7922-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7922-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7922-03",
"ProductNDC": "0990-7922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016367",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7924-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7924-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7924-03",
"ProductNDC": "0990-7924",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017606",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; .225",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191201",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.",
"Description": "Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7925-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7925-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7925-03",
"ProductNDC": "0990-7925",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017799",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; .3",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.",
"Description": "Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7926-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7926-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7926-03",
"ProductNDC": "0990-7926",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017607",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; .45",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191201",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.",
"Description": "Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7929-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7929-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7929-03",
"ProductNDC": "0990-7929",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers And Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017608",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE",
"StrengthNumber": "20; 5; 30; 600; 310",
"StrengthUnit": "mg/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories, as required by the clinical condition of the patient.",
"Description": "These products are sterile, nonpyrogenic solutions each containing isotonic concentrations of electrolytes (with or without dextrose) in water for injection. The solutions containing dextrose and electrolytes are hypertonic; those containing only electrolytes are isotonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories. Each 100 mL of Lactated Ringer's Injection, USP contains sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. A liter provides 9 calories (from lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq. The electrolyte content is isotonic (273 mOsmol/liter, calc.) in relation to the extracellular fluid (approx. 280 mOsmol/liter). The pH of the solution is 6.6 (6.0 − 7.5). Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g plus the same ingredients and mEq values as Lactated Ringer's Injection, USP (contains only hydrochloric acid for pH adjustment). A liter provides 179 calories (from dextrose and lactate) and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 60% aqueous solution miscible in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0990-7930-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7930-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7930-03",
"ProductNDC": "0990-7930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018080",
"LabelerName": "ICU Medical, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7941-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7941-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7941-03",
"ProductNDC": "0990-7941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017585",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "5; .9",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191201",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.",
"Description": "Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7953-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7953-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7953-03",
"ProductNDC": "0990-7953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, And Calcium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017641",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE",
"StrengthNumber": "20; 30; 600; 310",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories, as required by the clinical condition of the patient.",
"Description": "These products are sterile, nonpyrogenic solutions each containing isotonic concentrations of electrolytes (with or without dextrose) in water for injection. The solutions containing dextrose and electrolytes are hypertonic; those containing only electrolytes are isotonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories. Each 100 mL of Lactated Ringer's Injection, USP contains sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. A liter provides 9 calories (from lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq. The electrolyte content is isotonic (273 mOsmol/liter, calc.) in relation to the extracellular fluid (approx. 280 mOsmol/liter). The pH of the solution is 6.6 (6.0 − 7.5). Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g plus the same ingredients and mEq values as Lactated Ringer's Injection, USP (contains only hydrochloric acid for pH adjustment). A liter provides 179 calories (from dextrose and lactate) and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 60% aqueous solution miscible in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0990-7983-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7983-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7983-03",
"ProductNDC": "0990-7983",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016366",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "900",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191231",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0990-7985-03",
"PackageDescription": "24 POUCH in 1 CASE (0990-7985-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG",
"NDC11Code": "00990-7985-03",
"ProductNDC": "0990-7985",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018090",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "450",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191231",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "37000-990-03",
"PackageDescription": "3 CARTON in 1 CELLO PACK (37000-990-03) / 1 TUBE in 1 CARTON / 147 g in 1 TUBE",
"NDC11Code": "37000-0990-03",
"ProductNDC": "37000-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Crest Premium Plus",
"ProprietaryNameSuffix": "Scope Dual Blast Active Foam",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "PASTE, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2023-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N"
},
{
"NDCCode": "37662-0990-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-0990-3) ",
"NDC11Code": "37662-0990-03",
"ProductNDC": "37662-0990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dimethylum Flavus",
"NonProprietaryName": "Dimethylum Flavus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220719",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "P-DIMETHYLAMINOAZOBENZENE",
"StrengthNumber": "12",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220719",
"SamplePackage": "N"
},
{
"NDCCode": "59779-990-03",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (59779-990-03) > 25 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "59779-0990-03",
"ProductNDC": "59779-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bisacody",
"ProprietaryNameSuffix": "Enteric Coated",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "BISACODYL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-05-14"
},
{
"NDCCode": "63545-990-03",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (63545-990-03) ",
"NDC11Code": "63545-0990-03",
"ProductNDC": "63545-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ancylostoma Caninum",
"NonProprietaryName": "Ancylostoma Caninum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201214",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ANCYLOSTOMA CANINUM",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201214",
"SamplePackage": "N"
},
{
"NDCCode": "65162-990-03",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (65162-990-03) ",
"NDC11Code": "65162-0990-03",
"ProductNDC": "65162-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207497",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181130",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures (PGTC) and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug (AED). (1.2) .",
"Description": "Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "66890-990-03",
"PackageDescription": "248 L in 1 CYLINDER (66890-990-03) ",
"NDC11Code": "66890-0990-03",
"ProductNDC": "66890-990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20020115",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Stillwater Medical Authority DBA Cimarron Medical Services",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020115",
"SamplePackage": "N"
},
{
"NDCCode": "67296-0990-3",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (67296-0990-3) ",
"NDC11Code": "67296-0990-03",
"ProductNDC": "67296-0990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077863",
"LabelerName": "RedPharm Drug",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080819",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac sodium delayed-release tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS: Gastrointestinal Bleeding, Ulceration and Perforation). Diclofenac sodium delayed-release tablets are indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.",
"Description": "Diclofenac sodium is a benzeneacetic acid derivative, designated chemically as 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The structural formula is. C 14H 10Cl 2NNaO 2 M.W. 318.14. Diclofenac sodium is a white to off-white, hygroscopic crystalline powder. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in water and practically insoluble in chloroform and in dilute acid. The n-octanol/water partition coefficient is 13.4 at pH 7.4 and 1545 at pH 5.2. Diclofenac sodium has a dissociation constant (pKa) of 4.0 ± 0.2 at 25°C in water. Each enteric-coated tablet for oral administration contains 25 mg, 50 mg, or 75 mg of diclofenac sodium. In addition, each tablet contains the following inactive ingredients. Inactive ingredients: lactose (monohydrate), microcrystalline cellulose, croscarmellose sodium, povidone, talc, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, opadry brown (Titanium dioxide, hypromellose, polyethylene glycol, iron oxide red, iron oxide yellow)."
},
{
"NDCCode": "68428-990-03",
"PackageDescription": "75 PELLET in 1 VIAL, GLASS (68428-990-03)",
"NDC11Code": "68428-0990-03",
"ProductNDC": "68428-990",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Morbillinum",
"NonProprietaryName": "Measles Virus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110615",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "MEASLES VIRUS",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Indications. MORBILLINUM Skin disorders."
},
{
"NDCCode": "71335-0990-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-0990-3) ",
"NDC11Code": "71335-0990-03",
"ProductNDC": "71335-0990",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"ProprietaryNameSuffix": "500 Mg",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202710",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20181106",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>0990-7902-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7902-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7902-03</NDC11Code>
<ProductNDC>0990-7902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018362</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 1.49; 4.5</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See Tables for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7902-09</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7902-09) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7902-09</NDC11Code>
<ProductNDC>0990-7902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018362</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 1.49; 4.5</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See Tables for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0409-7902-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0409-7902-03) > 1 BAG in 1 POUCH > 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-7902-03</NDC11Code>
<ProductNDC>0409-7902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050131</StartMarketingDate>
<EndMarketingDate>20210801</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018362</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; 1.49</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20050228</StartMarketingDatePackage>
<EndMarketingDatePackage>20210201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63629-7902-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (63629-7902-3) </PackageDescription>
<NDC11Code>63629-7902-03</NDC11Code>
<ProductNDC>63629-7902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204319</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>. Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 2 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2)Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2)Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 3 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 4 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2)Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated. .</IndicationAndUsage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 micromol), 5 mg (16 micromol), 7.5 mg (24 micromol), 10 mg (32 micromol), 15 mg (48 micromol), or 20 mg (64 micromol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry ® 03A18286 (Hypromellose, Titanium Dioxide and Sodium Lauryl Sulfate) for 2.5 mg, 5 mg, 7.5 mg and 10 mg tablets, Opadry ® 03A605003 (Hypromellose, Titanium Dioxide, FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake) for 15 mg tablets and Opadry ® 03A640001 (Hypromellose, Titanium Dioxide, Talc and Iron Oxide Red) for 20 mg tablets.</Description>
</NDC>
<NDC>
<NDCCode>0409-7902-09</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-7902-09) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-7902-09</NDC11Code>
<ProductNDC>0409-7902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050131</StartMarketingDate>
<EndMarketingDate>20210801</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018362</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; 1.49</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20050131</StartMarketingDatePackage>
<EndMarketingDatePackage>20210801</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0990-4178-03</NDCCode>
<PackageDescription>12 BAG in 1 CASE (0990-4178-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-4178-03</NDC11Code>
<ProductNDC>0990-4178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn-pf</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019398</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE</SubstanceName>
<StrengthNumber>490; 861; 370; 576; 270; 220; 534; 831; 475; 125; 300; 570; 347; 50; 360; 125; 44; 452</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 7% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes, (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.</IndicationAndUsage>
<Description>Aminosyn®-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn®-PF 7% is oxygen sensitive. The formulation is described below. * Amount cited is for lysine alone and does not include the acetate salt. a From lysine acetate. The formulas for the individual amino acids present in Aminosyn-PF 7% are as follows. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-6138-03</NDCCode>
<PackageDescription>24 BOTTLE, PLASTIC in 1 CASE (0990-6138-03) / 500 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00990-6138-03</NDC11Code>
<ProductNDC>0990-6138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20190801</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017514</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>900</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Each of these solutions is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
<Description>These products are sterile, nonpyrogenic solutions of electrolytes in water for injection intended only for sterile irrigation, washing, rinsing and dilution purposes. Each 100 mL of 0.9% Sodium Chloride Irrigation, USP contains: Sodium chloride 900 mg; pH 5.6 (4.5 to 7.0). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The solution is isotonic (308 mOsmol/liter, CALC.) and has the following electrolyte content (mEq/liter): Na+ 154; Cl− 154. These irrigations contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Each of these irrigations may be classified as a sterile irrigant, wash, rinse, diluent and pharmaceutical vehicle. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The container requires no vapor barrier to maintain the proper drug concentration. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-6139-03</NDCCode>
<PackageDescription>24 BOTTLE, PLASTIC in 1 CASE (0990-6139-03) / 500 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00990-6139-03</NDC11Code>
<ProductNDC>0990-6139</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20190801</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017513</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190901</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sterile Water for Irrigation, USP is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of sterile, nonpyrogenic, solute-free water.</IndicationAndUsage>
<Description>Sterile Water for Irrigation, USP is a sterile, distilled, nonpyrogenic water for injection intended only for sterile irrigation, washing, rinsing and dilution purposes. pH 5.5 (5.0 to 7.0). Sterile Water for Irrigation, USP contains no bacteriostat, antimicrobial agent or added buffer and is intended for use only as a single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Sterile Water for Irrigation, USP may be classified as a sterile irrigant, wash, rinse, diluent and pharmaceutical vehicle. Water for Irrigation, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The container requires no vapor barrier to maintain the proper drug concentration. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7372-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7372-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7372-03</NDC11Code>
<ProductNDC>0990-7372</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ionosol Mb And Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019513</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM LACTATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; MONOBASIC POTASSIUM PHOSPHATE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>5; 30; 15; 141; 260; 25</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. In adults, Ionosol MB and 5% Dextrose Injection is indicated postoperatively for intravenous fluid and electrolyte maintenance therapy, with a small amount of carbohydrate calories for reducing catabolism of endogenous protein reserves.</IndicationAndUsage>
<Description>Ionosol MB and 5% Dextrose Injection (Multiple Electrolytes and 5% Dextrose Injection Type 1, USP) is a sterile, nonpyrogenic solution designed for intravenous administration. The solution is formulated to provide fluid and electrolytes for treatment of dehydration and acidosis. Each 100 mL contains dextrose, hydrous 5 g; sodium lactate, anhydrous 260 mg; potassium chloride 141 mg; magnesium chloride, hexahydrate 30 mg; monobasic potassium phosphate, anhydrous 15 mg; and monobasic sodium phosphate, monohydrate 25 mg. Each liter contains 25 mEq sodium (Na+); 20 mEq potassium (K+); 3 mEq magnesium (Mg++); 22 mEq chloride (Cl¯); 3 mM of phosphate (PO4≡); and 23 mEq lactate (CH3CH(OH)COO¯). The electrolyte content is hypotonic (100 mOsmol/L) in relation to the extracellular fluid (1pprox.. 280 mOsmol/L). The osmolarity for the total solution is 352 mOsmol/L (calc.). May contain hydrochloric acid for pH adjustment. pH is 5.0 (4.0 to 6.5). Dextrose, USP, hydrous is chemically designated C6H12O6 H2O (D-glucose, monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula:. Magnesium Chloride, USP, hexahydrate is chemically designated MgCl2 6H2O, colorless flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Monobasic Potassium Phosphate, NF, anhydrous is chemically designated KH2PO4, colorless crystals or white granular powder freely soluble in water. Sodium Lactate, USP is chemically designated CH3CH(OH)COONa, a 60% aqueous solution miscible in water. Monobasic Sodium Phosphate, USP, monohydrate is chemically designated NaH2PO4 H2O, white crystals or granules freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0990-7670-03</NDCCode>
<PackageDescription>24 BAG in 1 CASE (0990-7670-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7670-03</NDC11Code>
<ProductNDC>0990-7670</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Normosol-r</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Acetate Anhydrous, Sodium Gluconate, Potassium Chloride, And Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017586</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM ACETATE ANHYDROUS; SODIUM GLUCONATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>30; 37; 222; 526; 502</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Normosol-R pH 7.4 is indicated for replacement of acute extracellular fluid volume losses in surgery, trauma, burns or shock. Normosol-R pH 7.4 also can be used as an adjunct to restore a decrease in circulatory volume in patients with moderate blood loss. Normosol-R pH 7.4 is not intended to supplant transfusion of whole blood or packed red cells in the presence of uncontrolled hemorrhage or severe reductions of red cell volume. Normosol-R pH 7.4 is particularly valuable as a solution for use in starting blood, i.e., as a priming solution for the infusion set. No hemolysis of blood is seen at the interface or with mixed solution and blood. It may also be used as a diluent to aid in the transfusion of packed red blood cells (PRBC). Normosol-R pH 7.4 and physiologic saline solution (0.9% Sodium Chloride Injection, USP) are compatible with both young and old PRBC.</IndicationAndUsage>
<Description>Normosol®-R pH 7.4 is a sterile, nonpyrogenic, isotonic solution of balanced electrolytes in water for injection. The solution is administered by intravenous infusion for parenteral replacement of acute losses of extracellular fluid. Each 100 mL of Normosol-R pH 7.4 contains sodium chloride, 526 mg; sodium acetate, 222 mg; sodium gluconate, 502 mg; potassium chloride, 37 mg; magnesium chloride, hexahydrate 30 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH range 6.5 to 7.6; 295 mOsmol/liter (calc.). Electrolytes per 1000 mL (not including pH adjustment): Sodium 140 mEq; potassium 5 mEq; magnesium 3 mEq; chloride 98 mEq; acetate 27 mEq; gluconate 23 mEq. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-R pH 7.4 is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride, hexahydrate (MgCl2 6H2O) deliquescent crystals very soluble in water. Sodium Acetate, USP is chemically designated sodium acetate, anhydrous (C2H3NaO2), a hygroscopic powder soluble in water. It has the following structural formula. Sodium gluconate is chemically designated C6H11NaO7, the normal sodium salt of gluconic acid soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7715-03</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0990-7715-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0990-7715-13) </PackageDescription>
<NDC11Code>00990-7715-03</NDC11Code>
<ProductNDC>0990-7715</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mannitol</ProprietaryName>
<NonProprietaryName>Mannitol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190531</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019603</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>MANNITOL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Osmotic Activity [MoA], Osmotic Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mannitol Injection is indicated for the reduction of: 1 intracranial pressure and treatment of cerebral edema;, 2 elevated intraocular pressure.</IndicationAndUsage>
<Description>Mannitol Injection, USP is a sterile, nonpyrogenic solution of mannitol in water for injection available in a concentration of 20% in flexible plastic containers. The content and characteristics of the available concentration is as follows. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Mannitol Injection, USP is an osmotic diuretic for intravenous administration. Mannitol, USP is chemically designated D-mannitol (C6H14O6), a white crystalline powder or free-flowing granules freely soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap, but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7922-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7922-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7922-03</NDC11Code>
<ProductNDC>0990-7922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016367</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7924-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7924-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7924-03</NDC11Code>
<ProductNDC>0990-7924</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017606</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .225</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7925-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7925-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7925-03</NDC11Code>
<ProductNDC>0990-7925</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017799</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .3</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7926-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7926-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7926-03</NDC11Code>
<ProductNDC>0990-7926</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017607</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .45</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7929-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7929-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7929-03</NDC11Code>
<ProductNDC>0990-7929</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers And Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017608</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>20; 5; 30; 600; 310</StrengthNumber>
<StrengthUnit>mg/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories, as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>These products are sterile, nonpyrogenic solutions each containing isotonic concentrations of electrolytes (with or without dextrose) in water for injection. The solutions containing dextrose and electrolytes are hypertonic; those containing only electrolytes are isotonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories. Each 100 mL of Lactated Ringer's Injection, USP contains sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. A liter provides 9 calories (from lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq. The electrolyte content is isotonic (273 mOsmol/liter, calc.) in relation to the extracellular fluid (approx. 280 mOsmol/liter). The pH of the solution is 6.6 (6.0 − 7.5). Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g plus the same ingredients and mEq values as Lactated Ringer's Injection, USP (contains only hydrochloric acid for pH adjustment). A liter provides 179 calories (from dextrose and lactate) and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 60% aqueous solution miscible in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0990-7930-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7930-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7930-03</NDC11Code>
<ProductNDC>0990-7930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018080</ApplicationNumber>
<LabelerName>ICU Medical, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5% and 10%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 ∙ H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose Injection, USP (5% and 10%) solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose, hydrous 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. Each 100 mL of 10% Dextrose Injection, USP, contains dextrose, hydrous 10 g in water for injection. The caloric value is 340 kcal/L. The osmolarity is 505 mOsmol/L (calc.), which is hypertonic. The pH for both concentrations is 4.3 (range is 3.2 to 6.5). The solutions contain no bacteriostatic, antimicrobial agent or added buffer and each is supplied as single-dose containers. Dextrose is derived from corn. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7941-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7941-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7941-03</NDC11Code>
<ProductNDC>0990-7941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017585</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .9</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing various concentrations and combinations of these drugs in water for injection intended for intravenous administration. See Table for summary of content and characteristics of these solutions. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7953-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7953-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7953-03</NDC11Code>
<ProductNDC>0990-7953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, And Calcium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017641</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>20; 30; 600; 310</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories, as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>These products are sterile, nonpyrogenic solutions each containing isotonic concentrations of electrolytes (with or without dextrose) in water for injection. The solutions containing dextrose and electrolytes are hypertonic; those containing only electrolytes are isotonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with or without minimal carbohydrate calories. Each 100 mL of Lactated Ringer's Injection, USP contains sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. A liter provides 9 calories (from lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq. The electrolyte content is isotonic (273 mOsmol/liter, calc.) in relation to the extracellular fluid (approx. 280 mOsmol/liter). The pH of the solution is 6.6 (6.0 − 7.5). Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g plus the same ingredients and mEq values as Lactated Ringer's Injection, USP (contains only hydrochloric acid for pH adjustment). A liter provides 179 calories (from dextrose and lactate) and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 60% aqueous solution miscible in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0990-7983-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7983-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7983-03</NDC11Code>
<ProductNDC>0990-7983</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016366</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>900</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0990-7985-03</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0990-7985-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-7985-03</NDC11Code>
<ProductNDC>0990-7985</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018090</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>37000-990-03</NDCCode>
<PackageDescription>3 CARTON in 1 CELLO PACK (37000-990-03) / 1 TUBE in 1 CARTON / 147 g in 1 TUBE</PackageDescription>
<NDC11Code>37000-0990-03</NDC11Code>
<ProductNDC>37000-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Crest Premium Plus</ProprietaryName>
<ProprietaryNameSuffix>Scope Dual Blast Active Foam</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>PASTE, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-0990-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-0990-3) </PackageDescription>
<NDC11Code>37662-0990-03</NDC11Code>
<ProductNDC>37662-0990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dimethylum Flavus</ProprietaryName>
<NonProprietaryName>Dimethylum Flavus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220719</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>P-DIMETHYLAMINOAZOBENZENE</SubstanceName>
<StrengthNumber>12</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59779-990-03</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (59779-990-03) > 25 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59779-0990-03</NDC11Code>
<ProductNDC>59779-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bisacody</ProprietaryName>
<ProprietaryNameSuffix>Enteric Coated</ProprietaryNameSuffix>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-05-14</LastUpdate>
</NDC>
<NDC>
<NDCCode>63545-990-03</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (63545-990-03) </PackageDescription>
<NDC11Code>63545-0990-03</NDC11Code>
<ProductNDC>63545-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ancylostoma Caninum</ProprietaryName>
<NonProprietaryName>Ancylostoma Caninum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201214</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ANCYLOSTOMA CANINUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-990-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (65162-990-03) </PackageDescription>
<NDC11Code>65162-0990-03</NDC11Code>
<ProductNDC>65162-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207497</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures (PGTC) and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug (AED). (1.2) .</IndicationAndUsage>
<Description>Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>66890-990-03</NDCCode>
<PackageDescription>248 L in 1 CYLINDER (66890-990-03) </PackageDescription>
<NDC11Code>66890-0990-03</NDC11Code>
<ProductNDC>66890-990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20020115</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Stillwater Medical Authority DBA Cimarron Medical Services</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-0990-3</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (67296-0990-3) </PackageDescription>
<NDC11Code>67296-0990-03</NDC11Code>
<ProductNDC>67296-0990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077863</ApplicationNumber>
<LabelerName>RedPharm Drug</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac sodium delayed-release tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS: Gastrointestinal Bleeding, Ulceration and Perforation). Diclofenac sodium delayed-release tablets are indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.</IndicationAndUsage>
<Description>Diclofenac sodium is a benzeneacetic acid derivative, designated chemically as 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The structural formula is. C 14H 10Cl 2NNaO 2 M.W. 318.14. Diclofenac sodium is a white to off-white, hygroscopic crystalline powder. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in water and practically insoluble in chloroform and in dilute acid. The n-octanol/water partition coefficient is 13.4 at pH 7.4 and 1545 at pH 5.2. Diclofenac sodium has a dissociation constant (pKa) of 4.0 ± 0.2 at 25°C in water. Each enteric-coated tablet for oral administration contains 25 mg, 50 mg, or 75 mg of diclofenac sodium. In addition, each tablet contains the following inactive ingredients. Inactive ingredients: lactose (monohydrate), microcrystalline cellulose, croscarmellose sodium, povidone, talc, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, opadry brown (Titanium dioxide, hypromellose, polyethylene glycol, iron oxide red, iron oxide yellow).</Description>
</NDC>
<NDC>
<NDCCode>68428-990-03</NDCCode>
<PackageDescription>75 PELLET in 1 VIAL, GLASS (68428-990-03)</PackageDescription>
<NDC11Code>68428-0990-03</NDC11Code>
<ProductNDC>68428-990</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Morbillinum</ProprietaryName>
<NonProprietaryName>Measles Virus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110615</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>MEASLES VIRUS</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Indications. MORBILLINUM Skin disorders.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0990-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-0990-3) </PackageDescription>
<NDC11Code>71335-0990-03</NDC11Code>
<ProductNDC>71335-0990</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<ProprietaryNameSuffix>500 Mg</ProprietaryNameSuffix>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202710</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>