RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>10019-644-24</NDCCode>
    <PackageDescription>6 BOTTLE, GLASS in 1 CARTON (10019-644-24)  / 240 mL in 1 BOTTLE, GLASS (10019-644-60) </PackageDescription>
    <NDC11Code>10019-0644-24</NDC11Code>
    <ProductNDC>10019-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Suprane</ProprietaryName>
    <NonProprietaryName>Desflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19920918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020118</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>DESFLURANE</SubstanceName>
    <StrengthNumber>240</StrengthNumber>
    <StrengthUnit>mL/240mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .</IndicationAndUsage>
    <Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-644-34</NDCCode>
    <PackageDescription>6 BOTTLE in 1 CARTON (10019-644-34)  / 240 mL in 1 BOTTLE (10019-644-64) </PackageDescription>
    <NDC11Code>10019-0644-34</NDC11Code>
    <ProductNDC>10019-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Suprane</ProprietaryName>
    <NonProprietaryName>Desflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19920918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020118</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>DESFLURANE</SubstanceName>
    <StrengthNumber>240</StrengthNumber>
    <StrengthUnit>mL/240mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .</IndicationAndUsage>
    <Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
  </NDC>
  <NDC>
    <NDCCode>21130-644-62</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (21130-644-62)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>21130-0644-62</NDC11Code>
    <ProductNDC>21130-644</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Signature Care Allergy Relief D</ProprietaryName>
    <NonProprietaryName>Cetirizine Hydrochloride, Pseudoephedrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210719</ApplicationNumber>
    <LabelerName>Safeway</LabelerName>
    <SubstanceName>CETIRIZINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5; 120</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:. runny nose. sneezing. itchy, watery eyes. itching of the nose or throat. nasal congestion. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69842-644-62</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (69842-644-62)  / 1 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69842-0644-62</NDC11Code>
    <ProductNDC>69842-644</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Anti Diarrheal And Anti Gas</ProprietaryName>
    <NonProprietaryName>Loperamide Hydrochloride, Simethicone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190806</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209837</ApplicationNumber>
    <LabelerName>CVS Pharmacy</LabelerName>
    <SubstanceName>LOPERAMIDE HYDROCHLORIDE; DIMETHICONE</SubstanceName>
    <StrengthNumber>2; 125</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA], Skin Barrier Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190806</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves symptoms of diarrhea plus bloating, pressure and cramps, commonly referred to as gas.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>10019-008-24</NDCCode>
    <PackageDescription>24 POUCH in 1 BOX (10019-008-24)  / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
    <NDC11Code>10019-0008-24</NDC11Code>
    <ProductNDC>10019-008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Transderm Scop</ProprietaryName>
    <NonProprietaryName>Scopolamine</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20161201</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA017874</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>SCOPOLAMINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/3d</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250610</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
    <Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-553-02</NDCCode>
    <PackageDescription>24 POUCH in 1 BOX (10019-553-02)  &gt; 1 PATCH in 1 POUCH &gt; 3 d in 1 PATCH</PackageDescription>
    <NDC11Code>10019-0553-02</NDC11Code>
    <ProductNDC>10019-553</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Transderm Scop</ProprietaryName>
    <NonProprietaryName>Scopalamine</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20030101</StartMarketingDate>
    <EndMarketingDate>20190531</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA017874</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>SCOPOLAMINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/3d</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-06-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20030101</StartMarketingDatePackage>
    <EndMarketingDatePackage>20190531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>10019-553-04</NDCCode>
    <PackageDescription>24 POUCH in 1 BOX (10019-553-04)  / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
    <NDC11Code>10019-0553-04</NDC11Code>
    <ProductNDC>10019-553</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Transderm Scop</ProprietaryName>
    <NonProprietaryName>Scopolamine</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20161201</StartMarketingDate>
    <EndMarketingDate>20250228</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA017874</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>SCOPOLAMINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/3d</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20161201</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250228</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
    <Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌP transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-641-24</NDCCode>
    <PackageDescription>6 BOTTLE, GLASS in 1 CARTON (10019-641-24)  / 240 mL in 1 BOTTLE, GLASS (10019-641-60) </PackageDescription>
    <NDC11Code>10019-0641-24</NDC11Code>
    <ProductNDC>10019-641</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Suprane</ProprietaryName>
    <NonProprietaryName>Desflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19920918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020118</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>DESFLURANE</SubstanceName>
    <StrengthNumber>240</StrengthNumber>
    <StrengthUnit>mL/240mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation.</IndicationAndUsage>
    <Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-646-24</NDCCode>
    <PackageDescription>6 BOTTLE, GLASS in 1 CARTON (10019-646-24)  / 240 mL in 1 BOTTLE, GLASS (10019-646-60) </PackageDescription>
    <NDC11Code>10019-0646-24</NDC11Code>
    <ProductNDC>10019-646</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Suprane</ProprietaryName>
    <NonProprietaryName>Desflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19920918</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020118</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>DESFLURANE</SubstanceName>
    <StrengthNumber>240</StrengthNumber>
    <StrengthUnit>mL/240mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .</IndicationAndUsage>
    <Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-080-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (10019-080-01)  / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>10019-0080-01</NDC11Code>
    <ProductNDC>10019-080</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eribulin Mesylate</ProprietaryName>
    <NonProprietaryName>Eribulin Mesylate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217250</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>ERIBULIN MESYLATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eribulin Mesylate Injection is a microtubule inhibitor indicated for the treatment of patients with: 1 Metastatic breast cancer who have previously received at least two chemotherapeutic regimens for the treatment of metastatic disease. Prior therapy should have included an anthracycline and a taxane in either the adjuvant or metastatic setting. (1.1), 2 Unresectable or metastatic liposarcoma who have received a prior anthracycline-containing regimen. (1.2).</IndicationAndUsage>
    <Description>Eribulin Mesylate Injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9H,15H-furo[3,2-i]furo[2',3':5,6]pyrano[4,3-b][1,4]dioxacyclopentacosin-5(4H)-one, 2-[(2S)-3- amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2R,3R,3aS,7R,8aS,9S,10aR,11S,12R,13aR,13bS,15S,18S,21S,24S,26R,28R,29aS)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C40H59NO11CH4O3S. Eribulin mesylate has the following structural formula. Eribulin Mesylate Injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-651-64</NDCCode>
    <PackageDescription>6 BOTTLE in 1 CARTON (10019-651-64)  / 250 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>10019-0651-64</NDC11Code>
    <ProductNDC>10019-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sevoflurane</ProprietaryName>
    <NonProprietaryName>Sevoflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20020702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075895</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>SEVOFLURANE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mL/250mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
    <Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-653-64</NDCCode>
    <PackageDescription>6 BOTTLE in 1 CARTON (10019-653-64)  / 250 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>10019-0653-64</NDC11Code>
    <ProductNDC>10019-653</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sevoflurane</ProprietaryName>
    <NonProprietaryName>Sevoflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20020707</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075895</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>SEVOFLURANE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mL/250mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020707</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
    <Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (&gt; 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-655-06</NDCCode>
    <PackageDescription>6 BOTTLE in 1 CARTON (10019-655-06)  / 250 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>10019-0655-06</NDC11Code>
    <ProductNDC>10019-655</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sevoflurane</ProprietaryName>
    <NonProprietaryName>Sevoflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20020702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075895</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>SEVOFLURANE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mL/250mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220726</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
    <Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-657-06</NDCCode>
    <PackageDescription>6 BOTTLE in 1 CARTON (10019-657-06)  / 250 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>10019-0657-06</NDC11Code>
    <ProductNDC>10019-657</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sevoflurane</ProprietaryName>
    <NonProprietaryName>Sevoflurane</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20020707</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075895</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>SEVOFLURANE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mL/250mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220726</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
    <Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (&gt; 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
  </NDC>
  <NDC>
    <NDCCode>10019-991-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (10019-991-01)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>10019-0991-01</NDC11Code>
    <ProductNDC>10019-991</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bortezomib</ProprietaryName>
    <NonProprietaryName>Bortezomib</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20220502</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213823</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>BORTEZOMIB</SubstanceName>
    <StrengthNumber>3.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proteasome Inhibitor [EPC], Proteasome Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220502</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bortezomib for Injection is a proteasome inhibitor indicated for: 1 treatment of adult patients with multiple myeloma (1.1), 2 treatment of adult patients with mantle cell lymphoma (1.2).</IndicationAndUsage>
    <Description>Bortezomib for Injection, a proteasome inhibitor, contains bortezomib which is an antineoplastic agent. Bortezomib is a modified dipeptidyl boronic acid. The chemical name for bortezomib, the monomeric boronic acid, is [(1R)-3-methyl-1-[[(2S)-1-oxo-3-phenyl-2-[(pyrazinylcarbonyl) amino]propyl]amino]butyl] boronic acid. Bortezomib has the following chemical structure. The molecular weight is 384.24. The molecular formula is C19H25BN4O4. The solubility of bortezomib, as the monomeric boronic acid, in water is 3.3 to 3.8 mg/mL in a pH range of 2 to 6.5. Bortezomib for Injection is available for intravenous injection or subcutaneous use. Each single-dose vial contains 3.5 mg of bortezomib as a sterile lyophilized powder. It also contains the inactive ingredient: 35 mg mannitol, USP. The product is provided as a mannitol boronic ester which, in reconstituted form, consists of the mannitol ester in equilibrium with its hydrolysis product, the monomeric boronic acid. The drug substance exists in its cyclic anhydride form as a trimeric boroxine.</Description>
  </NDC>
  <NDC>
    <NDCCode>0409-2300-24</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (0409-2300-24)  / 1 BAG in 1 POUCH (0409-2300-01)  / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>00409-2300-24</NDC11Code>
    <ProductNDC>0409-2300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin In Dextrose</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Hospira, Inc.</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>0409-3300-24</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (0409-3300-24)  / 1 BAG in 1 POUCH (0409-3300-01)  / 200 mL in 1 BAG</PackageDescription>
    <NDC11Code>00409-3300-24</NDC11Code>
    <ProductNDC>0409-3300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin In Dextrose</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Hospira, Inc.</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/200mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-644-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (10135-644-01) </PackageDescription>
    <NDC11Code>10135-0644-01</NDC11Code>
    <ProductNDC>10135-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204989</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&amp;C Red 40, D&amp;C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&amp;C Yellow 10, and FD&amp;C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-644-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE, PLASTIC (10135-644-05) </PackageDescription>
    <NDC11Code>10135-0644-05</NDC11Code>
    <ProductNDC>10135-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204989</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&amp;C Red 40, D&amp;C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&amp;C Yellow 10, and FD&amp;C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-114-82</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (25021-114-82)  / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>25021-0114-82</NDC11Code>
    <ProductNDC>25021-114</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20080324</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The plastic container is not made with natural rubber latex and is fabricated from a specially formulated polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, for example, Cyclohexanone and Chlorobenzene, up to 115 and 0.09 parts per million, respectively. The suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-114-87</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (25021-114-87)  / 1 BAG in 1 POUCH / 200 mL in 1 BAG</PackageDescription>
    <NDC11Code>25021-0114-87</NDC11Code>
    <ProductNDC>25021-114</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20080324</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The plastic container is not made with natural rubber latex and is fabricated from a specially formulated polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, for example, Cyclohexanone and Chlorobenzene, up to 115 and 0.09 parts per million, respectively. The suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-192-82</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (25021-192-82)  / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>25021-0192-82</NDC11Code>
    <ProductNDC>25021-192</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-192-87</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (25021-192-87)  / 1 BAG in 1 POUCH / 200 mL in 1 BAG</PackageDescription>
    <NDC11Code>25021-0192-87</NDC11Code>
    <ProductNDC>25021-192</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1) , 2 Bone and Joint Infections (1.2) , 3 Complicated Intra-Abdominal Infections (1.3) , 4 Nosocomial Pneumonia (1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients (1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients (1.6) , 7 Plague in Adult and Pediatric Patients (1.7) , 8 Chronic Bacterial Prostatitis (1.8) , 9 Lower Respiratory Tract Infections (1.9)Acute Exacerbation of Chronic Bronchitis , 10 Urinary Tract Infections (1.10)Urinary Tract Infections (UTI) Complicated UTI and Pyelonephritis in Pediatric Patients , 11 Acute Sinusitis (1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% ready-for-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-644-18</NDCCode>
    <PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (43598-644-18) </PackageDescription>
    <NDC11Code>43598-0644-18</NDC11Code>
    <ProductNDC>43598-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213627</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>49; 51</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4­oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-644-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (43598-644-60) </PackageDescription>
    <NDC11Code>43598-0644-60</NDC11Code>
    <ProductNDC>43598-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213627</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>49; 51</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4­oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>46672-644-04</NDCCode>
    <PackageDescription>118 mL in 1 BOTTLE, PLASTIC (46672-644-04) </PackageDescription>
    <NDC11Code>46672-0644-04</NDC11Code>
    <ProductNDC>46672-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carbinoxamine Maleate</ProprietaryName>
    <NonProprietaryName>Carbinoxamine Maleate</NonProprietaryName>
    <DosageFormName>SYRUP</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030425</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040458</ApplicationNumber>
    <LabelerName>Mikart, LLC</LabelerName>
    <SubstanceName>CARBINOXAMINE MALEATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Histamine-1 Receptor Antagonist [EPC],Histamine H1 Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030425</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>46672-644-16</NDCCode>
    <PackageDescription>473 mL in 1 BOTTLE, PLASTIC (46672-644-16) </PackageDescription>
    <NDC11Code>46672-0644-16</NDC11Code>
    <ProductNDC>46672-644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carbinoxamine Maleate</ProprietaryName>
    <NonProprietaryName>Carbinoxamine Maleate</NonProprietaryName>
    <DosageFormName>SYRUP</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030425</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040458</ApplicationNumber>
    <LabelerName>Mikart, LLC</LabelerName>
    <SubstanceName>CARBINOXAMINE MALEATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Histamine-1 Receptor Antagonist [EPC],Histamine H1 Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030425</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>64538-644-00</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, GLASS (64538-644-00) </PackageDescription>
    <NDC11Code>64538-0644-00</NDC11Code>
    <ProductNDC>64538-644</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Lanadelumab-flyo</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <StartMarketingDate>20180824</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Rentschler Biopharma SE</LabelerName>
    <SubstanceName>LANADELUMAB</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-01-23</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>24-AUG-18</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>73499-001-01</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (73499-001-01)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>73499-0001-01</NDC11Code>
    <ProductNDC>73499-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Wynzora</ProprietaryName>
    <NonProprietaryName>Calcipotriene And Betamethasone Dipropionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20210630</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213422</ApplicationNumber>
    <LabelerName>MC2 Therapeutics Ltd</LabelerName>
    <SubstanceName>CALCIPOTRIENE; BETAMETHASONE DIPROPIONATE</SubstanceName>
    <StrengthNumber>50; 64</StrengthNumber>
    <StrengthUnit>ug/g; mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Vitamin D Analog [EPC], Vitamin D [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>WYNZORA Cream is indicated for the topical treatment of plaque psoriasis in patients 18 years of age and older.</IndicationAndUsage>
    <Description>WYNZORA (calcipotriene and betamethasone dipropionate) Cream contains anhydrous calcipotriene and betamethasone dipropionate intended for topical use. Calcipotriene is a synthetic vitamin D3 analog. Chemically, calcipotriene is (5Z,7E,22E,24S)-24-Cyclopropyl-9,10-secochola-5,7,10(19),22 tetraene-1α,3β,24-triol, with the empirical formula C27H40O3, a molecular weight of 412.6, and the following structural formula. Calcipotriene is a white or almost white powder. It is insoluble in water, freely soluble in ethanol and slightly soluble in methylene chloride. Betamethasone dipropionate is a synthetic corticosteroid. Betamethasone dipropionate has the chemical name Pregna-1,4-diene-3,20-dione,9-fluoro-11-hydroxy-16-methyl-17,21-bis(1-oxypropoxy)-,(11β,16β), with the empirical formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to almost white crystalline powder. It is practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of WYNZORA Cream contains 50 mcg of calcipotriene and 0.644 mg of betamethasone dipropionate (equivalent to 0.5 mg of betamethasone). WYNZORA Cream also contains the following inactive ingredients: isopropyl myristate, mineral oil, medium-chain triglycerides, isopropyl alcohol, polyoxyl lauryl ether, poloxamer (407), polyoxyl 40 hydrogenated castor oil, carbomer interpolymer (type A), butylated hydroxyanisole, trolamine, dibasic sodium phosphate, heptahydrate, monobasic sodium phosphate, monohydrate, alpha-tocopherol and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>73499-001-03</NDCCode>
    <PackageDescription>10 TUBE in 1 CARTON (73499-001-03)  / 5 g in 1 TUBE</PackageDescription>
    <NDC11Code>73499-0001-03</NDC11Code>
    <ProductNDC>73499-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Wynzora</ProprietaryName>
    <NonProprietaryName>Calcipotriene And Betamethasone Dipropionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20210630</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213422</ApplicationNumber>
    <LabelerName>MC2 Therapeutics Ltd</LabelerName>
    <SubstanceName>CALCIPOTRIENE; BETAMETHASONE DIPROPIONATE</SubstanceName>
    <StrengthNumber>50; 64</StrengthNumber>
    <StrengthUnit>ug/g; mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Vitamin D Analog [EPC], Vitamin D [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210630</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>WYNZORA Cream is indicated for the topical treatment of plaque psoriasis in patients 18 years of age and older.</IndicationAndUsage>
    <Description>WYNZORA (calcipotriene and betamethasone dipropionate) Cream contains anhydrous calcipotriene and betamethasone dipropionate intended for topical use. Calcipotriene is a synthetic vitamin D3 analog. Chemically, calcipotriene is (5Z,7E,22E,24S)-24-Cyclopropyl-9,10-secochola-5,7,10(19),22 tetraene-1α,3β,24-triol, with the empirical formula C27H40O3, a molecular weight of 412.6, and the following structural formula. Calcipotriene is a white or almost white powder. It is insoluble in water, freely soluble in ethanol and slightly soluble in methylene chloride. Betamethasone dipropionate is a synthetic corticosteroid. Betamethasone dipropionate has the chemical name Pregna-1,4-diene-3,20-dione,9-fluoro-11-hydroxy-16-methyl-17,21-bis(1-oxypropoxy)-,(11β,16β), with the empirical formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to almost white crystalline powder. It is practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of WYNZORA Cream contains 50 mcg of calcipotriene and 0.644 mg of betamethasone dipropionate (equivalent to 0.5 mg of betamethasone). WYNZORA Cream also contains the following inactive ingredients: isopropyl myristate, mineral oil, medium-chain triglycerides, isopropyl alcohol, polyoxyl lauryl ether, poloxamer (407), polyoxyl 40 hydrogenated castor oil, carbomer interpolymer (type A), butylated hydroxyanisole, trolamine, dibasic sodium phosphate, heptahydrate, monobasic sodium phosphate, monohydrate, alpha-tocopherol and purified water.</Description>
  </NDC>
</NDCList>