{
"NDC": [
{
"NDCCode": "10135-146-14",
"PackageDescription": "15 g in 1 BOTTLE, PLASTIC (10135-146-14) ",
"NDC11Code": "10135-0146-14",
"ProductNDC": "10135-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Polystyrene Sulfonate",
"NonProprietaryName": "Sodium Polystyrene Sulfonate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL; RECTAL",
"StartMarketingDate": "20160301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204071",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "SODIUM POLYSTYRENE SULFONATE",
"StrengthNumber": "4.1",
"StrengthUnit": "meq/g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160301",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium polystyrene sulfonate for suspension is indicated for the treatment of hyperkalemia.",
"Description": "Sodium polystyrene sulfonate is a benzene, diethenyl- polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown finely ground, powdered form of sodium polystyrene sulfonate, a cation exchange resin prepared in the sodium phase with an in vitroexchange capacity of approximately 3.1 mEq ( in vivoapproximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema."
},
{
"NDCCode": "10135-146-17",
"PackageDescription": "454 g in 1 JAR (10135-146-17) ",
"NDC11Code": "10135-0146-17",
"ProductNDC": "10135-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Polystyrene Sulfonate",
"NonProprietaryName": "Sodium Polystyrene Sulfonate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL; RECTAL",
"StartMarketingDate": "20160301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204071",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "SODIUM POLYSTYRENE SULFONATE",
"StrengthNumber": "4.1",
"StrengthUnit": "meq/g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160301",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium polystyrene sulfonate for suspension is indicated for the treatment of hyperkalemia.",
"Description": "Sodium polystyrene sulfonate is a benzene, diethenyl- polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown finely ground, powdered form of sodium polystyrene sulfonate, a cation exchange resin prepared in the sodium phase with an in vitroexchange capacity of approximately 3.1 mEq ( in vivoapproximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema."
},
{
"NDCCode": "10135-821-14",
"PackageDescription": "14 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-821-14) ",
"NDC11Code": "10135-0821-14",
"ProductNDC": "10135-821",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desvenlafaxine",
"NonProprietaryName": "Desvenlafaxine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204805",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "DESVENLAFAXINE SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250701",
"SamplePackage": "N",
"IndicationAndUsage": "Desvenlafaxine extended-release tablets, is indicated for the treatment of adults with major depressive disorder (MDD) [ seeClinical Studies (14)].",
"Description": "Desvenlafaxine extended-release is an extended-release tablet for oral administration that contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the empirical formula of C 16H 25NO 2(free base) and C 16H 25NO 2C 4H 6O 4H 2O (succinate monohydrate). Desvenlafaxine succinate monohydrate has a molecular weight of 399.48. The structural formula is shown below. Desvenlafaxine succinate is a white to off-white powder that is soluble in water. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7.0) partition coefficient is 0.21. Desvenlafaxine extended-release is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 76 mg or 152 mg of desvenlafaxine succinate equivalent to 50 mg or 100 mg of desvenlafaxine, respectively. Inactive ingredients for the 50 mg tablet and 100 mg tablet consist of hypromellose, hydroxyethyl cellulose, ethyl cellulose, microcrystalline cellulose, magnesium stearate and film coatings, which consists of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and iron oxides."
},
{
"NDCCode": "10135-822-14",
"PackageDescription": "14 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-822-14) ",
"NDC11Code": "10135-0822-14",
"ProductNDC": "10135-822",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desvenlafaxine",
"NonProprietaryName": "Desvenlafaxine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204805",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "DESVENLAFAXINE SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250701",
"SamplePackage": "N",
"IndicationAndUsage": "Desvenlafaxine extended-release tablets, is indicated for the treatment of adults with major depressive disorder (MDD) [ seeClinical Studies (14)].",
"Description": "Desvenlafaxine extended-release is an extended-release tablet for oral administration that contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the empirical formula of C 16H 25NO 2(free base) and C 16H 25NO 2C 4H 6O 4H 2O (succinate monohydrate). Desvenlafaxine succinate monohydrate has a molecular weight of 399.48. The structural formula is shown below. Desvenlafaxine succinate is a white to off-white powder that is soluble in water. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7.0) partition coefficient is 0.21. Desvenlafaxine extended-release is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 76 mg or 152 mg of desvenlafaxine succinate equivalent to 50 mg or 100 mg of desvenlafaxine, respectively. Inactive ingredients for the 50 mg tablet and 100 mg tablet consist of hypromellose, hydroxyethyl cellulose, ethyl cellulose, microcrystalline cellulose, magnesium stearate and film coatings, which consists of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and iron oxides."
},
{
"NDCCode": "12539-146-02",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (12539-146-02) / 14.7868 mL in 1 BOTTLE, DROPPER (12539-146-01) ",
"NDC11Code": "12539-0146-02",
"ProductNDC": "12539-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nafasolina",
"NonProprietaryName": "Naphazoline Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "NASAL",
"StartMarketingDate": "20250320",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Doral Pharmamedics Inc DBA AG Marin Pharmaceuticals",
"SubstanceName": "NAPHAZOLINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/100mL",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250320",
"SamplePackage": "N",
"IndicationAndUsage": "Naphazoline hydrochloride 0.05% nasal drops are indicated for the temporary relief of nasal congestion due to the common cold, hay fever, or sinusitis. Temporarily relieves a stuffy nose. Helps clear nasal passages."
},
{
"NDCCode": "16590-146-14",
"PackageDescription": "14 TABLET in 1 BOTTLE (16590-146-14)",
"NDC11Code": "16590-0146-14",
"ProductNDC": "16590-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19810603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087128",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC],Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the prevention and treatment of nausea, vomiting, or dizziness associated with motion sickness.",
"Description": "Meclizine hydrochloride, an oral antiemetic, is a white, slightly yellowish, crystalline powder which has a slight odor and is tasteless. It has the following structural formula:. C25H27CIN22HCIH2O M.W. 481.89. The chemical name is 1-(p-chloro-alpha-phenylbenzyl)-4-(m-methyl-benzyl) - piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets are available in 12.5 mg, and *25 mg strengths for oral administration. *Contains FD&C Yellow #5 (see PRECAUTIONS). Each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, starch, and stearic acid. In addition, the 12.5 mg tablet contains FD&C Blue #1; and the 25 mg tablet contains D&C Yellow #10 and FD&C Yellow #5."
},
{
"NDCCode": "20276-146-14",
"PackageDescription": "414 mL in 1 BOTTLE, PLASTIC (20276-146-14) ",
"NDC11Code": "20276-0146-14",
"ProductNDC": "20276-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lucky",
"ProprietaryNameSuffix": "Antibacterial",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170301",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Delta Brands, Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20201104",
"SamplePackage": "N",
"IndicationAndUsage": "for hand washing to decrease bacteria on the skin."
},
{
"NDCCode": "24909-146-14",
"PackageDescription": "14 g in 1 JAR (24909-146-14) ",
"NDC11Code": "24909-0146-14",
"ProductNDC": "24909-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Terrasil Ipl Relief",
"NonProprietaryName": "Thuja Occidentalis",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140314",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Aidance Skincare & Topical Solutions, LLC",
"SubstanceName": "THUJA OCCIDENTALIS LEAFY TWIG",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/g",
"Status": "Deprecated",
"LastUpdate": "2024-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140314",
"SamplePackage": "N",
"IndicationAndUsage": "Relief from symptoms of itch, papules (bumps) and lesions often associated with Molluscum per diagnosis and care by physician."
},
{
"NDCCode": "24909-146-15",
"PackageDescription": "14 g in 1 TUBE (24909-146-15) ",
"NDC11Code": "24909-0146-15",
"ProductNDC": "24909-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Terrasil Ipl Relief",
"NonProprietaryName": "Thuja Occidentalis",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140314",
"EndMarketingDate": "20250315",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Aidance Skincare & Topical Solutions, LLC",
"SubstanceName": "THUJA OCCIDENTALIS LEAFY TWIG",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/g",
"Status": "Deprecated",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181229",
"EndMarketingDatePackage": "20250315",
"SamplePackage": "N",
"IndicationAndUsage": "Relief from symptoms of itch, papules (bumps) and lesions often associated with Molluscum per diagnosis and care by physician."
},
{
"NDCCode": "42708-146-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (42708-146-14) ",
"NDC11Code": "42708-0146-14",
"ProductNDC": "42708-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20040609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075593",
"LabelerName": "QPharma Inc",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210423",
"SamplePackage": "Y",
"Description": "Ciprofloxacin tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydratesalt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid.It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin film-coated tablets are available in 100 mg, 250 mg, 500 mg and 750 strengths. Each ciprofloxacin film-coated tablet contains 100 mg (equivalent to 116.4 mg ciprofloxacin hydrochloride monohydrate) or 250 mg (equivalent to 291 mg ciprofloxacin hydrochloride monohydrate) or 500 mg of ciprofloxacin (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate) or 750 mg of ciprofloxacin (equivalent to 873 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets are white. The inactive ingredients are colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "49348-146-46",
"PackageDescription": "14 PATCH in 1 CARTON (49348-146-46) > 24 h in 1 PATCH",
"NDC11Code": "49348-0146-46",
"ProductNDC": "49348-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine",
"ProprietaryNameSuffix": "Transdermal System Step 3",
"NonProprietaryName": "Nicotine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20151102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020076",
"LabelerName": "Strategic Sourcing Services LLC",
"SubstanceName": "NICOTINE",
"StrengthNumber": "7",
"StrengthUnit": "mg/24h",
"Status": "Deprecated",
"LastUpdate": "2021-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20151102",
"SamplePackage": "N"
},
{
"NDCCode": "53329-146-14",
"PackageDescription": "57 g in 1 TUBE (53329-146-14) ",
"NDC11Code": "53329-0146-14",
"ProductNDC": "53329-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medline",
"NonProprietaryName": "White Petrolatum",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230301",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Medline Industries, LP",
"SubstanceName": "WHITE PETROLATUM",
"StrengthNumber": "983",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230301",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N"
},
{
"NDCCode": "57896-146-14",
"PackageDescription": "144 PACKET in 1 CARTON (57896-146-14) / .9 g in 1 PACKET",
"NDC11Code": "57896-0146-14",
"ProductNDC": "57896-146",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hydrocortisone 1%",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Geri-Care Pharmaceuticals, Corp",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of itching associated with minor skin irritations and rashes. ● external feminine, genital and anal itching. Other uses of this product should be only under the advice and supervision of a doctor."
},
{
"NDCCode": "63354-932-14",
"PackageDescription": "146 g in 1 BOTTLE, PLASTIC (63354-932-14) ",
"NDC11Code": "63354-0932-14",
"ProductNDC": "63354-932",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Banana Boat",
"NonProprietaryName": "Avobenzone, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20111229",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Edgewell Personal Care Brands LLC",
"SubstanceName": "AVOBENZONE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "1; 7.7; 3",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20111229",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "66259-903-14",
"PackageDescription": "1 KIT in 1 KIT (66259-903-14) * 10 mL in 1 VIAL, PLASTIC * 1 VIAL in 1 VIAL (66259-146-02) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (66259-146-01) ",
"NDC11Code": "66259-0903-14",
"ProductNDC": "66259-903",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spy-phi Kit",
"NonProprietaryName": "Indocyanine Green",
"DosageFormName": "KIT",
"RouteName": "INTRADERMAL; INTRAVASCULAR; INTRAVENOUS",
"StartMarketingDate": "20190910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211580",
"LabelerName": "Novadaq Technologies Inc",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "SPY AGENT GREEN is an optical imaging agent indicated for use with a fluorescence imaging device for: : 1 Visualization of vessels (micro and macro vasculature), blood flow and tissue perfusion before, during, and after vascular, gastrointestinal, organ transplant, plastic, micro- and reconstructive surgeries including general minimally invasive surgical procedures in adults and pediatric patients one month of age and older. (1.1) , 2 Visualization of extrahepatic biliary ducts in adults and pediatric patients aged 12 years and older. (1.2) , 3 Visualization of lymph nodes and lymphatic vessels during lymphatic mapping in adults with cervical and uterine cancer. (1.3) , 4 Visualization of lymph nodes and lymphatic vessels during lymphatic mapping in adults with breast cancer. (1.4).",
"Description": "SPY AGENT GREEN (indocyanine green for injection, USP) is a water soluble, optical imaging agent which is reconstituted with Sterile Water for Injection, USP, for intravenous, interstitial or intradermal use. Each vial contains a sterile, lyophilized, green powder containing 25 mg of indocyanine green with not more than 5% sodium iodide. Hydrochloric acid or sodium hydroxide may be used to adjust the pH prior to lyophilization. The chemical name for Indocyanine Green is 1 HBenz[e]indolium, 2-[7-[1,3-dihydro-1,1-dimethyl-3-(4-sulfobutyl)-2H-benz[e] indol-2-ylidene]-1,3,5-heptatrienyl]-1,1-dimethyl-3-(4-sulfobutyl)-, hydroxide, inner salt, sodium salt. Molecular Formula: C 43H 47N 2NaO 6S 2; Molecular Mass: 774.96 g/mol, with the following structural formula:. Indocyanine green has a peak spectral absorption at 805 nm. SPY AGENT GREEN has a pH of 5.5 to 7.5 when reconstituted with Sterile Water for Injection, USP."
},
{
"NDCCode": "67046-146-14",
"PackageDescription": "14 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (67046-146-14)",
"NDC11Code": "67046-0146-14",
"ProductNDC": "67046-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090070",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"Description": "Divalproex sodium USP is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship and formed during the partial neutralization of valproic acid with 0.5 equivalent of sodium hydroxide. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium USP has the following structure:. Divalproex sodium USP occurs as a white to off white powder with a characteristic odor, very soluble in chloroform, freely soluble in methanol and ethyl ether, soluble in acetone, practically insoluble in acetonitrile. Divalproex sodium extended-release tablets USP, 500 mg are for oral administration. Divalproex sodium extended-release tablets USP, contain divalproex sodium USP in a once-a-day extended-release formulation equivalent to 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium extended-release tablets USP, 500 mg: Hydroxy ethyl cellulose, hydroxy propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, lactose monohydrate, microcrystalline cellulose, silicon dioxide, and titanium dioxide. Divalproex sodium extended-release tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "10135-584-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (10135-584-01)",
"NDC11Code": "10135-0584-01",
"ProductNDC": "10135-584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089776",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.",
"Description": "Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light."
},
{
"NDCCode": "10135-584-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-584-10)",
"NDC11Code": "10135-0584-10",
"ProductNDC": "10135-584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089776",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.",
"Description": "Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light."
},
{
"NDCCode": "10135-584-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10135-584-30)",
"NDC11Code": "10135-0584-30",
"ProductNDC": "10135-584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089776",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.",
"Description": "Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light."
},
{
"NDCCode": "10135-615-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10135-615-30)",
"NDC11Code": "10135-0615-30",
"ProductNDC": "10135-615",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206652",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease. The following points should be considered when initiating therapy with Entecavir tablets: 1 In adult patients, this indication is based on clinical trial data in nucleoside-inhibitor-treatment-naïve and lamivudine-resistant subjects with HBeAg-positive and HBeAg-negative HBV infection and compensated liver disease and a more limited number of subjects with decompensated liver disease [see Clinical Studies (14.1)].",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C H N O H O. which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25° C ± 0.5° C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of Entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: Crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone. The tablet coating contains hypromellose, iron oxide red (in 1 mg tablet only), polyethylene glycol 8000 and titanium dioxide."
},
{
"NDCCode": "10135-616-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10135-616-30)",
"NDC11Code": "10135-0616-30",
"ProductNDC": "10135-616",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206652",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease. The following points should be considered when initiating therapy with Entecavir tablets: 1 In adult patients, this indication is based on clinical trial data in nucleoside-inhibitor-treatment-naïve and lamivudine-resistant subjects with HBeAg-positive and HBeAg-negative HBV infection and compensated liver disease and a more limited number of subjects with decompensated liver disease [see Clinical Studies (14.1)].",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C H N O H O. which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25° C ± 0.5° C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of Entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: Crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone. The tablet coating contains hypromellose, iron oxide red (in 1 mg tablet only), polyethylene glycol 8000 and titanium dioxide."
},
{
"NDCCode": "10135-632-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (10135-632-05)",
"NDC11Code": "10135-0632-05",
"ProductNDC": "10135-632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzonatate",
"NonProprietaryName": "Benzonatate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040682",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "BENZONATATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Tracheobronchial Stretch Receptor Activity [PE],Non-narcotic Antitussive [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Benzonatate is indicated for the symptomatic relief of cough.",
"Description": "Benzonatate, a non-narcotic antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26- nonaoxaoctacosan-28-yl p-(butylamino) benzoate; with a molecular weight of 603.7. Benzonatate Capsules, USP contain 100 mg or 200 mg of benzonatate, USP. Benzonatate Capsules also contain: D&C Yellow No. 10, gelatin, glycerin, methylparaben sodium and propylparaben sodium."
},
{
"NDCCode": "10135-724-99",
"PackageDescription": "1 TUBE in 1 CARTON (10135-724-99) / 28.35 g in 1 TUBE",
"NDC11Code": "10135-0724-99",
"ProductNDC": "10135-724",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroquinone",
"NonProprietaryName": "Hydroquinone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "HYDROQUINONE",
"StrengthNumber": "40",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Depigmenting Activity [PE], Melanin Synthesis Inhibitor [EPC], Melanin Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210301",
"SamplePackage": "N",
"IndicationAndUsage": "HYDROQUINONE USP, 4% SKIN BLEACHING CREAMis indicated for the gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.",
"Description": "Each gram of HYDROQUINONE USP, 4% SKIN BLEACHING CREAM contains 40 mg hydroquinone, in a cream base of Glyceryl Monostearate, Mineral Oil, PEG-25 Propylene Glycol Stearate, Polyoxl-40 Stearate, Propylene Glycol, Propylparaben, Purified water, sodium metabisulfite, Squalane and Stearic Acid. Chemically, hydroquinone is C 6H 6O 2and has a molecular weight of 110.11. The chemical name is 1,4 dihydroxybenzene, and the structural formula of hydroquinone is:."
},
{
"NDCCode": "10135-725-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-725-01) ",
"NDC11Code": "10135-0725-01",
"ProductNDC": "10135-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214674",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium."
},
{
"NDCCode": "10135-726-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-726-01) ",
"NDC11Code": "10135-0726-01",
"ProductNDC": "10135-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214674",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium."
},
{
"NDCCode": "10135-727-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-727-01) ",
"NDC11Code": "10135-0727-01",
"ProductNDC": "10135-727",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214674",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium."
},
{
"NDCCode": "10135-728-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-728-01) ",
"NDC11Code": "10135-0728-01",
"ProductNDC": "10135-728",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214674",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium."
},
{
"NDCCode": "10135-738-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (10135-738-01) ",
"NDC11Code": "10135-0738-01",
"ProductNDC": "10135-738",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rifabutin",
"NonProprietaryName": "Rifabutin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215041",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "RIFABUTIN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Rifamycin Antimycobacterial [EPC], Rifamycins [CS]",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220501",
"SamplePackage": "N",
"IndicationAndUsage": "Rifabutin Capsules are indicated for the prevention of disseminated Mycobacterium aviumcomplex (MAC) disease in patients with advanced HIV infection.",
"Description": "Rifabutin Capsules for oral administration contain 150 mg of the rifamycin antimycobacterial agent rifabutin, USP, per capsule along with the inactive ingredients, microcrystalline cellulose, sodium lauryl sulfate, colloidal silicon dioxide, magnesium stearate. The hard gelatin capsule contains titanium dioxide, red iron oxide, gelatin, sodium lauryl sulfate and purified water. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. The chemical name for rifabutin is 1',4-didehydro-1-deoxy-1,4-dihydro-5'-(2- methylpropyl)-1-oxorifamycin XIV (Chemical Abstracts Service, 9th Collective Index) or (9 S,12 E,14 S,15 R, 16 S,17 R,18 R,19 R,20 S,21 S,22 E, 24 Z)-6,16,18,20-tetrahydroxy-1'-. isobutyl-14-methoxy- 7,9,15,17,19,21,25-heptamethyl-spiro [9,4- (epoxypentadeca[1,11,13]trienimino)-2 H- furo[2',3':7,8]naphth[1,2-d] imidazole-2,4'- piperidine]-5,10,26-(3 H,9 H)-trione-16-acetate. Rifabutin has a molecular formula of C 46H 62N 4O 11, a molecular weight of 847.02 and the following structure:. Rifabutin is a red-violet powder soluble in methanol, slightly soluble in ethanol, and slightly soluble in water (0.21 mg/mL). Its log P value (the base 10 logarithm of the partition coefficient between n-octanol and water) is 3.2 (n-octanol/water). FDA approved dissolution method differs from the current USP monograph dissolution method."
},
{
"NDCCode": "10135-747-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-747-01) ",
"NDC11Code": "10135-0747-01",
"ProductNDC": "10135-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215307",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N",
"IndicationAndUsage": "Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O- 2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14- dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is:. Digoxin exists as white or almost white powder or colorless crystals. The drug is practically insoluble in water; soluble in mixture of methanol & methylene chloride and slightly soluble in ethyl alcohol. Digoxin is supplied as, 125 mcg (scored), and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, lactose anhydrous, magnesium stearate. The 125 mcg tablets additionally contain yellow iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "10135-747-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-747-10) ",
"NDC11Code": "10135-0747-10",
"ProductNDC": "10135-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215307",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N",
"IndicationAndUsage": "Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O- 2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14- dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is:. Digoxin exists as white or almost white powder or colorless crystals. The drug is practically insoluble in water; soluble in mixture of methanol & methylene chloride and slightly soluble in ethyl alcohol. Digoxin is supplied as, 125 mcg (scored), and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, lactose anhydrous, magnesium stearate. The 125 mcg tablets additionally contain yellow iron oxide. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>10135-146-14</NDCCode>
<PackageDescription>15 g in 1 BOTTLE, PLASTIC (10135-146-14) </PackageDescription>
<NDC11Code>10135-0146-14</NDC11Code>
<ProductNDC>10135-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Polystyrene Sulfonate</ProprietaryName>
<NonProprietaryName>Sodium Polystyrene Sulfonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL; RECTAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204071</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>SODIUM POLYSTYRENE SULFONATE</SubstanceName>
<StrengthNumber>4.1</StrengthNumber>
<StrengthUnit>meq/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium polystyrene sulfonate for suspension is indicated for the treatment of hyperkalemia.</IndicationAndUsage>
<Description>Sodium polystyrene sulfonate is a benzene, diethenyl- polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown finely ground, powdered form of sodium polystyrene sulfonate, a cation exchange resin prepared in the sodium phase with an in vitroexchange capacity of approximately 3.1 mEq ( in vivoapproximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema.</Description>
</NDC>
<NDC>
<NDCCode>10135-146-17</NDCCode>
<PackageDescription>454 g in 1 JAR (10135-146-17) </PackageDescription>
<NDC11Code>10135-0146-17</NDC11Code>
<ProductNDC>10135-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Polystyrene Sulfonate</ProprietaryName>
<NonProprietaryName>Sodium Polystyrene Sulfonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL; RECTAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204071</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>SODIUM POLYSTYRENE SULFONATE</SubstanceName>
<StrengthNumber>4.1</StrengthNumber>
<StrengthUnit>meq/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium polystyrene sulfonate for suspension is indicated for the treatment of hyperkalemia.</IndicationAndUsage>
<Description>Sodium polystyrene sulfonate is a benzene, diethenyl- polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown finely ground, powdered form of sodium polystyrene sulfonate, a cation exchange resin prepared in the sodium phase with an in vitroexchange capacity of approximately 3.1 mEq ( in vivoapproximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema.</Description>
</NDC>
<NDC>
<NDCCode>10135-821-14</NDCCode>
<PackageDescription>14 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-821-14) </PackageDescription>
<NDC11Code>10135-0821-14</NDC11Code>
<ProductNDC>10135-821</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desvenlafaxine</ProprietaryName>
<NonProprietaryName>Desvenlafaxine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204805</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DESVENLAFAXINE SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desvenlafaxine extended-release tablets, is indicated for the treatment of adults with major depressive disorder (MDD) [ seeClinical Studies (14)].</IndicationAndUsage>
<Description>Desvenlafaxine extended-release is an extended-release tablet for oral administration that contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the empirical formula of C 16H 25NO 2(free base) and C 16H 25NO 2C 4H 6O 4H 2O (succinate monohydrate). Desvenlafaxine succinate monohydrate has a molecular weight of 399.48. The structural formula is shown below. Desvenlafaxine succinate is a white to off-white powder that is soluble in water. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7.0) partition coefficient is 0.21. Desvenlafaxine extended-release is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 76 mg or 152 mg of desvenlafaxine succinate equivalent to 50 mg or 100 mg of desvenlafaxine, respectively. Inactive ingredients for the 50 mg tablet and 100 mg tablet consist of hypromellose, hydroxyethyl cellulose, ethyl cellulose, microcrystalline cellulose, magnesium stearate and film coatings, which consists of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>10135-822-14</NDCCode>
<PackageDescription>14 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-822-14) </PackageDescription>
<NDC11Code>10135-0822-14</NDC11Code>
<ProductNDC>10135-822</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desvenlafaxine</ProprietaryName>
<NonProprietaryName>Desvenlafaxine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204805</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DESVENLAFAXINE SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desvenlafaxine extended-release tablets, is indicated for the treatment of adults with major depressive disorder (MDD) [ seeClinical Studies (14)].</IndicationAndUsage>
<Description>Desvenlafaxine extended-release is an extended-release tablet for oral administration that contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the empirical formula of C 16H 25NO 2(free base) and C 16H 25NO 2C 4H 6O 4H 2O (succinate monohydrate). Desvenlafaxine succinate monohydrate has a molecular weight of 399.48. The structural formula is shown below. Desvenlafaxine succinate is a white to off-white powder that is soluble in water. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7.0) partition coefficient is 0.21. Desvenlafaxine extended-release is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 76 mg or 152 mg of desvenlafaxine succinate equivalent to 50 mg or 100 mg of desvenlafaxine, respectively. Inactive ingredients for the 50 mg tablet and 100 mg tablet consist of hypromellose, hydroxyethyl cellulose, ethyl cellulose, microcrystalline cellulose, magnesium stearate and film coatings, which consists of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>12539-146-02</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (12539-146-02) / 14.7868 mL in 1 BOTTLE, DROPPER (12539-146-01) </PackageDescription>
<NDC11Code>12539-0146-02</NDC11Code>
<ProductNDC>12539-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nafasolina</ProprietaryName>
<NonProprietaryName>Naphazoline Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20250320</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Doral Pharmamedics Inc DBA AG Marin Pharmaceuticals</LabelerName>
<SubstanceName>NAPHAZOLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naphazoline hydrochloride 0.05% nasal drops are indicated for the temporary relief of nasal congestion due to the common cold, hay fever, or sinusitis. Temporarily relieves a stuffy nose. Helps clear nasal passages.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16590-146-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (16590-146-14)</PackageDescription>
<NDC11Code>16590-0146-14</NDC11Code>
<ProductNDC>16590-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19810603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087128</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC],Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the prevention and treatment of nausea, vomiting, or dizziness associated with motion sickness.</IndicationAndUsage>
<Description>Meclizine hydrochloride, an oral antiemetic, is a white, slightly yellowish, crystalline powder which has a slight odor and is tasteless. It has the following structural formula:. C25H27CIN22HCIH2O M.W. 481.89. The chemical name is 1-(p-chloro-alpha-phenylbenzyl)-4-(m-methyl-benzyl) - piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets are available in 12.5 mg, and *25 mg strengths for oral administration. *Contains FD&C Yellow #5 (see PRECAUTIONS). Each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, starch, and stearic acid. In addition, the 12.5 mg tablet contains FD&C Blue #1; and the 25 mg tablet contains D&C Yellow #10 and FD&C Yellow #5.</Description>
</NDC>
<NDC>
<NDCCode>20276-146-14</NDCCode>
<PackageDescription>414 mL in 1 BOTTLE, PLASTIC (20276-146-14) </PackageDescription>
<NDC11Code>20276-0146-14</NDC11Code>
<ProductNDC>20276-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lucky</ProprietaryName>
<ProprietaryNameSuffix>Antibacterial</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Delta Brands, Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for hand washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24909-146-14</NDCCode>
<PackageDescription>14 g in 1 JAR (24909-146-14) </PackageDescription>
<NDC11Code>24909-0146-14</NDC11Code>
<ProductNDC>24909-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Terrasil Ipl Relief</ProprietaryName>
<NonProprietaryName>Thuja Occidentalis</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140314</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Aidance Skincare & Topical Solutions, LLC</LabelerName>
<SubstanceName>THUJA OCCIDENTALIS LEAFY TWIG</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Relief from symptoms of itch, papules (bumps) and lesions often associated with Molluscum per diagnosis and care by physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24909-146-15</NDCCode>
<PackageDescription>14 g in 1 TUBE (24909-146-15) </PackageDescription>
<NDC11Code>24909-0146-15</NDC11Code>
<ProductNDC>24909-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Terrasil Ipl Relief</ProprietaryName>
<NonProprietaryName>Thuja Occidentalis</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140314</StartMarketingDate>
<EndMarketingDate>20250315</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Aidance Skincare & Topical Solutions, LLC</LabelerName>
<SubstanceName>THUJA OCCIDENTALIS LEAFY TWIG</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181229</StartMarketingDatePackage>
<EndMarketingDatePackage>20250315</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Relief from symptoms of itch, papules (bumps) and lesions often associated with Molluscum per diagnosis and care by physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42708-146-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (42708-146-14) </PackageDescription>
<NDC11Code>42708-0146-14</NDC11Code>
<ProductNDC>42708-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075593</ApplicationNumber>
<LabelerName>QPharma Inc</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210423</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<Description>Ciprofloxacin tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydratesalt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid.It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin film-coated tablets are available in 100 mg, 250 mg, 500 mg and 750 strengths. Each ciprofloxacin film-coated tablet contains 100 mg (equivalent to 116.4 mg ciprofloxacin hydrochloride monohydrate) or 250 mg (equivalent to 291 mg ciprofloxacin hydrochloride monohydrate) or 500 mg of ciprofloxacin (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate) or 750 mg of ciprofloxacin (equivalent to 873 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets are white. The inactive ingredients are colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>49348-146-46</NDCCode>
<PackageDescription>14 PATCH in 1 CARTON (49348-146-46) > 24 h in 1 PATCH</PackageDescription>
<NDC11Code>49348-0146-46</NDC11Code>
<ProductNDC>49348-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine</ProprietaryName>
<ProprietaryNameSuffix>Transdermal System Step 3</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20151102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020076</ApplicationNumber>
<LabelerName>Strategic Sourcing Services LLC</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53329-146-14</NDCCode>
<PackageDescription>57 g in 1 TUBE (53329-146-14) </PackageDescription>
<NDC11Code>53329-0146-14</NDC11Code>
<ProductNDC>53329-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medline</ProprietaryName>
<NonProprietaryName>White Petrolatum</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230301</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Medline Industries, LP</LabelerName>
<SubstanceName>WHITE PETROLATUM</SubstanceName>
<StrengthNumber>983</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230301</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>57896-146-14</NDCCode>
<PackageDescription>144 PACKET in 1 CARTON (57896-146-14) / .9 g in 1 PACKET</PackageDescription>
<NDC11Code>57896-0146-14</NDC11Code>
<ProductNDC>57896-146</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone 1%</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Geri-Care Pharmaceuticals, Corp</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of itching associated with minor skin irritations and rashes. ● external feminine, genital and anal itching. Other uses of this product should be only under the advice and supervision of a doctor.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63354-932-14</NDCCode>
<PackageDescription>146 g in 1 BOTTLE, PLASTIC (63354-932-14) </PackageDescription>
<NDC11Code>63354-0932-14</NDC11Code>
<ProductNDC>63354-932</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Banana Boat</ProprietaryName>
<NonProprietaryName>Avobenzone, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20111229</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Edgewell Personal Care Brands LLC</LabelerName>
<SubstanceName>AVOBENZONE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>1; 7.7; 3</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>66259-903-14</NDCCode>
<PackageDescription>1 KIT in 1 KIT (66259-903-14) * 10 mL in 1 VIAL, PLASTIC * 1 VIAL in 1 VIAL (66259-146-02) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (66259-146-01) </PackageDescription>
<NDC11Code>66259-0903-14</NDC11Code>
<ProductNDC>66259-903</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spy-phi Kit</ProprietaryName>
<NonProprietaryName>Indocyanine Green</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRADERMAL; INTRAVASCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211580</ApplicationNumber>
<LabelerName>Novadaq Technologies Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SPY AGENT GREEN is an optical imaging agent indicated for use with a fluorescence imaging device for: : 1 Visualization of vessels (micro and macro vasculature), blood flow and tissue perfusion before, during, and after vascular, gastrointestinal, organ transplant, plastic, micro- and reconstructive surgeries including general minimally invasive surgical procedures in adults and pediatric patients one month of age and older. (1.1) , 2 Visualization of extrahepatic biliary ducts in adults and pediatric patients aged 12 years and older. (1.2) , 3 Visualization of lymph nodes and lymphatic vessels during lymphatic mapping in adults with cervical and uterine cancer. (1.3) , 4 Visualization of lymph nodes and lymphatic vessels during lymphatic mapping in adults with breast cancer. (1.4).</IndicationAndUsage>
<Description>SPY AGENT GREEN (indocyanine green for injection, USP) is a water soluble, optical imaging agent which is reconstituted with Sterile Water for Injection, USP, for intravenous, interstitial or intradermal use. Each vial contains a sterile, lyophilized, green powder containing 25 mg of indocyanine green with not more than 5% sodium iodide. Hydrochloric acid or sodium hydroxide may be used to adjust the pH prior to lyophilization. The chemical name for Indocyanine Green is 1 HBenz[e]indolium, 2-[7-[1,3-dihydro-1,1-dimethyl-3-(4-sulfobutyl)-2H-benz[e] indol-2-ylidene]-1,3,5-heptatrienyl]-1,1-dimethyl-3-(4-sulfobutyl)-, hydroxide, inner salt, sodium salt. Molecular Formula: C 43H 47N 2NaO 6S 2; Molecular Mass: 774.96 g/mol, with the following structural formula:. Indocyanine green has a peak spectral absorption at 805 nm. SPY AGENT GREEN has a pH of 5.5 to 7.5 when reconstituted with Sterile Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>67046-146-14</NDCCode>
<PackageDescription>14 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (67046-146-14)</PackageDescription>
<NDC11Code>67046-0146-14</NDC11Code>
<ProductNDC>67046-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090070</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<Description>Divalproex sodium USP is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship and formed during the partial neutralization of valproic acid with 0.5 equivalent of sodium hydroxide. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium USP has the following structure:. Divalproex sodium USP occurs as a white to off white powder with a characteristic odor, very soluble in chloroform, freely soluble in methanol and ethyl ether, soluble in acetone, practically insoluble in acetonitrile. Divalproex sodium extended-release tablets USP, 500 mg are for oral administration. Divalproex sodium extended-release tablets USP, contain divalproex sodium USP in a once-a-day extended-release formulation equivalent to 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium extended-release tablets USP, 500 mg: Hydroxy ethyl cellulose, hydroxy propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, lactose monohydrate, microcrystalline cellulose, silicon dioxide, and titanium dioxide. Divalproex sodium extended-release tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>10135-584-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (10135-584-01)</PackageDescription>
<NDC11Code>10135-0584-01</NDC11Code>
<ProductNDC>10135-584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089776</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.</IndicationAndUsage>
<Description>Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>10135-584-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-584-10)</PackageDescription>
<NDC11Code>10135-0584-10</NDC11Code>
<ProductNDC>10135-584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089776</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.</IndicationAndUsage>
<Description>Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>10135-584-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10135-584-30)</PackageDescription>
<NDC11Code>10135-0584-30</NDC11Code>
<ProductNDC>10135-584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089776</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Isoniazid is recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid, or any other medication, is inadequate therapy. Isoniazid is recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis). 1. Persons with human immunodeficiency virus (HIV) infection ( ≥ 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculinnegative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy. 2. Close contacts of persons with newly diagnosed infectious tuberculosis (≥ 5 mm). In addition, tuberculin-negative (<5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (> 5mm), therapy should be continued. 3. Recent converters, as indicated by a tuberculin skin test (≥10 mm increase within a 2-year period for those <35 years old; ≥15 mm increase for those ≥ 35 years of age). All infants and children younger than 4 years of age with a > 10 mm skin test are included in this category. 4. Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (≥5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. 5. Intravenous drug users known to be HIV-seronegative (>10 mm). 6. Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (≥10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state (with or without weight loss), chronic peptic ulcer disease, chronic malabsorption syndromes, and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly. Additionally, in the absence of any of the above risk factors, persons under the age of 35 with a tuberculin skin test reaction of 10 mm or more are also appropriate candidates for preventive therapy if they are a member of any of the following high-incidence groups. 1. Foreign-born persons from high-prevalence countries who never received BCG vaccine. 2. Medically underserved low-income populations, including high-risk racial or ethnic minority populations, especially blacks, Hispanics, and Native Americans. 3. Residents of facilities for long-term care (e.g., correctional institutions, nursing homes, and mental institutions). Children who are less than 4 years old are candidates for isoniazid preventive therapy if they have > 10 mm induration from a PPD Mantoux tuberculin skin test. Finally, persons under the age of 35 who a) have none of the above risk factors (1-6); b) belong to none of the high-incidence groups; and c) have a tuberculin skin test reaction of 15 mm or more, are appropriate candidates for preventive therapy. The risk of hepatitis must be weighed against the risk of tuberculosis in positive tuberculin reactors over the age of 35. However, the use of isoniazid is recommended for those with the additional risk factors listed above (1-6) and on an individual basis in situations where there is likelihood of serious consequences to contacts who may become infected.</IndicationAndUsage>
<Description>Isoniazid is an antibacterial available as 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: calcium sulfate, pregelatinized starch, croscarmellose sodium, povidone, and calcium stearate. Isoniazid is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has an empirical formula of C6H7N3O and a molecular weight of 137.14. It has the following structure:. Isoniazid is odorless and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>10135-615-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10135-615-30)</PackageDescription>
<NDC11Code>10135-0615-30</NDC11Code>
<ProductNDC>10135-615</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206652</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease. The following points should be considered when initiating therapy with Entecavir tablets: 1 In adult patients, this indication is based on clinical trial data in nucleoside-inhibitor-treatment-naïve and lamivudine-resistant subjects with HBeAg-positive and HBeAg-negative HBV infection and compensated liver disease and a more limited number of subjects with decompensated liver disease [see Clinical Studies (14.1)].</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C H N O H O. which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25° C ± 0.5° C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of Entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: Crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone. The tablet coating contains hypromellose, iron oxide red (in 1 mg tablet only), polyethylene glycol 8000 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10135-616-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10135-616-30)</PackageDescription>
<NDC11Code>10135-0616-30</NDC11Code>
<ProductNDC>10135-616</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206652</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease. The following points should be considered when initiating therapy with Entecavir tablets: 1 In adult patients, this indication is based on clinical trial data in nucleoside-inhibitor-treatment-naïve and lamivudine-resistant subjects with HBeAg-positive and HBeAg-negative HBV infection and compensated liver disease and a more limited number of subjects with decompensated liver disease [see Clinical Studies (14.1)].</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C H N O H O. which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25° C ± 0.5° C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of Entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: Crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone. The tablet coating contains hypromellose, iron oxide red (in 1 mg tablet only), polyethylene glycol 8000 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10135-632-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (10135-632-05)</PackageDescription>
<NDC11Code>10135-0632-05</NDC11Code>
<ProductNDC>10135-632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzonatate</ProprietaryName>
<NonProprietaryName>Benzonatate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040682</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>BENZONATATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Tracheobronchial Stretch Receptor Activity [PE],Non-narcotic Antitussive [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Benzonatate is indicated for the symptomatic relief of cough.</IndicationAndUsage>
<Description>Benzonatate, a non-narcotic antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26- nonaoxaoctacosan-28-yl p-(butylamino) benzoate; with a molecular weight of 603.7. Benzonatate Capsules, USP contain 100 mg or 200 mg of benzonatate, USP. Benzonatate Capsules also contain: D&C Yellow No. 10, gelatin, glycerin, methylparaben sodium and propylparaben sodium.</Description>
</NDC>
<NDC>
<NDCCode>10135-724-99</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10135-724-99) / 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>10135-0724-99</NDC11Code>
<ProductNDC>10135-724</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroquinone</ProprietaryName>
<NonProprietaryName>Hydroquinone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>HYDROQUINONE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Depigmenting Activity [PE], Melanin Synthesis Inhibitor [EPC], Melanin Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HYDROQUINONE USP, 4% SKIN BLEACHING CREAMis indicated for the gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.</IndicationAndUsage>
<Description>Each gram of HYDROQUINONE USP, 4% SKIN BLEACHING CREAM contains 40 mg hydroquinone, in a cream base of Glyceryl Monostearate, Mineral Oil, PEG-25 Propylene Glycol Stearate, Polyoxl-40 Stearate, Propylene Glycol, Propylparaben, Purified water, sodium metabisulfite, Squalane and Stearic Acid. Chemically, hydroquinone is C 6H 6O 2and has a molecular weight of 110.11. The chemical name is 1,4 dihydroxybenzene, and the structural formula of hydroquinone is:.</Description>
</NDC>
<NDC>
<NDCCode>10135-725-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-725-01) </PackageDescription>
<NDC11Code>10135-0725-01</NDC11Code>
<ProductNDC>10135-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214674</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium.</Description>
</NDC>
<NDC>
<NDCCode>10135-726-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-726-01) </PackageDescription>
<NDC11Code>10135-0726-01</NDC11Code>
<ProductNDC>10135-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214674</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium.</Description>
</NDC>
<NDC>
<NDCCode>10135-727-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-727-01) </PackageDescription>
<NDC11Code>10135-0727-01</NDC11Code>
<ProductNDC>10135-727</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214674</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium.</Description>
</NDC>
<NDC>
<NDCCode>10135-728-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-728-01) </PackageDescription>
<NDC11Code>10135-0728-01</NDC11Code>
<ProductNDC>10135-728</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214674</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium.</Description>
</NDC>
<NDC>
<NDCCode>10135-738-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (10135-738-01) </PackageDescription>
<NDC11Code>10135-0738-01</NDC11Code>
<ProductNDC>10135-738</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rifabutin</ProprietaryName>
<NonProprietaryName>Rifabutin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215041</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIFABUTIN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Rifamycin Antimycobacterial [EPC], Rifamycins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rifabutin Capsules are indicated for the prevention of disseminated Mycobacterium aviumcomplex (MAC) disease in patients with advanced HIV infection.</IndicationAndUsage>
<Description>Rifabutin Capsules for oral administration contain 150 mg of the rifamycin antimycobacterial agent rifabutin, USP, per capsule along with the inactive ingredients, microcrystalline cellulose, sodium lauryl sulfate, colloidal silicon dioxide, magnesium stearate. The hard gelatin capsule contains titanium dioxide, red iron oxide, gelatin, sodium lauryl sulfate and purified water. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. The chemical name for rifabutin is 1',4-didehydro-1-deoxy-1,4-dihydro-5'-(2- methylpropyl)-1-oxorifamycin XIV (Chemical Abstracts Service, 9th Collective Index) or (9 S,12 E,14 S,15 R, 16 S,17 R,18 R,19 R,20 S,21 S,22 E, 24 Z)-6,16,18,20-tetrahydroxy-1'-. isobutyl-14-methoxy- 7,9,15,17,19,21,25-heptamethyl-spiro [9,4- (epoxypentadeca[1,11,13]trienimino)-2 H- furo[2',3':7,8]naphth[1,2-d] imidazole-2,4'- piperidine]-5,10,26-(3 H,9 H)-trione-16-acetate. Rifabutin has a molecular formula of C 46H 62N 4O 11, a molecular weight of 847.02 and the following structure:. Rifabutin is a red-violet powder soluble in methanol, slightly soluble in ethanol, and slightly soluble in water (0.21 mg/mL). Its log P value (the base 10 logarithm of the partition coefficient between n-octanol and water) is 3.2 (n-octanol/water). FDA approved dissolution method differs from the current USP monograph dissolution method.</Description>
</NDC>
<NDC>
<NDCCode>10135-747-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-747-01) </PackageDescription>
<NDC11Code>10135-0747-01</NDC11Code>
<ProductNDC>10135-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215307</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O- 2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14- dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is:. Digoxin exists as white or almost white powder or colorless crystals. The drug is practically insoluble in water; soluble in mixture of methanol & methylene chloride and slightly soluble in ethyl alcohol. Digoxin is supplied as, 125 mcg (scored), and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, lactose anhydrous, magnesium stearate. The 125 mcg tablets additionally contain yellow iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>10135-747-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-747-10) </PackageDescription>
<NDC11Code>10135-0747-10</NDC11Code>
<ProductNDC>10135-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215307</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O- 2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14- dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is:. Digoxin exists as white or almost white powder or colorless crystals. The drug is practically insoluble in water; soluble in mixture of methanol & methylene chloride and slightly soluble in ethyl alcohol. Digoxin is supplied as, 125 mcg (scored), and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, lactose anhydrous, magnesium stearate. The 125 mcg tablets additionally contain yellow iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>