{
"NDC": [
{
"NDCCode": "10135-823-33",
"PackageDescription": "360 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-33) ",
"NDC11Code": "10135-0823-33",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "51991-823-33",
"PackageDescription": "30 TABLET in 1 BOTTLE (51991-823-33) ",
"NDC11Code": "51991-0823-33",
"ProductNDC": "51991-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Everolimus",
"NonProprietaryName": "Everolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205426",
"LabelerName": "Breckenridge Pharmaceutical, Inc.",
"SubstanceName": "EVEROLIMUS",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230605",
"SamplePackage": "N",
"IndicationAndUsage": "Everolimus tablets are a kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with progressive neuroendocrine tumors of pancreatic origin (PNET) and adults with progressive, well-differentiated, non-functional neuroendocrine tumors (NET) of gastrointestinal (GI) or lung origin that are unresectable, locally advanced or metastatic.",
"Description": "Everolimus Tablets and Everolimus Tablets for Oral Suspension are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18-dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contain 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, and magnesium stearate. Everolimus tablets for oral suspension for oral administration contains 2 mg, 3 mg, or 5 mg of everolimus and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, crospovidone, hypromellose, anhydrous lactose, magnesium stearate, mannitol, and microcrystalline cellulose."
},
{
"NDCCode": "10135-823-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-05) ",
"NDC11Code": "10135-0823-05",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-10) ",
"NDC11Code": "10135-0823-10",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-30",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-30) ",
"NDC11Code": "10135-0823-30",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-32",
"PackageDescription": "180 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-32) ",
"NDC11Code": "10135-0823-32",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-60",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-60) ",
"NDC11Code": "10135-0823-60",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-62",
"PackageDescription": "120 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-62) ",
"NDC11Code": "10135-0823-62",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-823-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-90) ",
"NDC11Code": "10135-0823-90",
"ProductNDC": "10135-823",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "0088-2500-33",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (0088-2500-33) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "00088-2500-33",
"ProductNDC": "0088-2500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Apidra",
"NonProprietaryName": "Insulin Glulisine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20090224",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021629",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "INSULIN GLULISINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090224",
"SamplePackage": "N",
"IndicationAndUsage": "APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide."
},
{
"NDCCode": "10135-585-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-585-01)",
"NDC11Code": "10135-0585-01",
"ProductNDC": "10135-585",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-585-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-585-10)",
"NDC11Code": "10135-0585-10",
"ProductNDC": "10135-585",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-586-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-586-01)",
"NDC11Code": "10135-0586-01",
"ProductNDC": "10135-586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-586-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-586-10)",
"NDC11Code": "10135-0586-10",
"ProductNDC": "10135-586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-587-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-587-01)",
"NDC11Code": "10135-0587-01",
"ProductNDC": "10135-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-587-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-587-10)",
"NDC11Code": "10135-0587-10",
"ProductNDC": "10135-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-588-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-588-01)",
"NDC11Code": "10135-0588-01",
"ProductNDC": "10135-588",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-588-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-588-10)",
"NDC11Code": "10135-0588-10",
"ProductNDC": "10135-588",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine Succinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "10135-603-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10135-603-01)",
"NDC11Code": "10135-0603-01",
"ProductNDC": "10135-603",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extended Phenytoin Sodium",
"NonProprietaryName": "Phenytoin Sodium",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040765",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "PHENYTOIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Extended phenytoin sodium capsules, USP are indicated for the control of generalized tonic-clonic (grand mal) and complex partial (psychomotor, temporal lobe) seizures and prevention and treatment of seizures occurring during or following neurosurgery. Phenytoin serum level determinations may be necessary for optimal dosage adjustments (see DOSAGE AND ADMINISTRATION and CLINICAL PHARMACOLOGY sections).",
"Description": "Phenytoin sodium, USP is an antiepileptic drug. Phenytoin sodium, USP is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione, having the following structural formula. Each extended phenytoin sodium capsule, USP contains 100 mg phenytoin sodium, USP. Each capsule also contains the following inactive ingredients: D&C Red #28, D&C Red #33, FD&C Blue #1, gelatin, hydroxypropyl cellulose, mannitol, magnesium stearate, talc and titanium dioxide. Product in vivo performance is characterized by a slow and extended rate of absorption with peak blood concentrations expected in 4 to 12 hours as contrasted to Prompt Phenytoin Sodium Capsules, USP with a rapid rate of absorption with peak blood concentration expected in 1½ to 3 hours."
},
{
"NDCCode": "10135-603-10",
"PackageDescription": "1000 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10135-603-10)",
"NDC11Code": "10135-0603-10",
"ProductNDC": "10135-603",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extended Phenytoin Sodium",
"NonProprietaryName": "Phenytoin Sodium",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040765",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "PHENYTOIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Extended phenytoin sodium capsules, USP are indicated for the control of generalized tonic-clonic (grand mal) and complex partial (psychomotor, temporal lobe) seizures and prevention and treatment of seizures occurring during or following neurosurgery. Phenytoin serum level determinations may be necessary for optimal dosage adjustments (see DOSAGE AND ADMINISTRATION and CLINICAL PHARMACOLOGY sections).",
"Description": "Phenytoin sodium, USP is an antiepileptic drug. Phenytoin sodium, USP is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione, having the following structural formula. Each extended phenytoin sodium capsule, USP contains 100 mg phenytoin sodium, USP. Each capsule also contains the following inactive ingredients: D&C Red #28, D&C Red #33, FD&C Blue #1, gelatin, hydroxypropyl cellulose, mannitol, magnesium stearate, talc and titanium dioxide. Product in vivo performance is characterized by a slow and extended rate of absorption with peak blood concentrations expected in 4 to 12 hours as contrasted to Prompt Phenytoin Sodium Capsules, USP with a rapid rate of absorption with peak blood concentration expected in 1½ to 3 hours."
},
{
"NDCCode": "0088-2500-34",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (0088-2500-34) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "00088-2500-34",
"ProductNDC": "0088-2500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Apidra",
"NonProprietaryName": "Insulin Glulisine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20090224",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021629",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "INSULIN GLULISINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090224",
"SamplePackage": "N",
"IndicationAndUsage": "APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide."
},
{
"NDCCode": "0088-2502-01",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0088-2502-01) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00088-2502-01",
"ProductNDC": "0088-2502",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Apidra Solostar",
"NonProprietaryName": "Insulin Glulisine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20090224",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021629",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "INSULIN GLULISINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090224",
"SamplePackage": "N",
"IndicationAndUsage": "APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide."
},
{
"NDCCode": "0088-2502-05",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0088-2502-05) / 3 mL in 1 SYRINGE, PLASTIC (0088-2502-00) ",
"NDC11Code": "00088-2502-05",
"ProductNDC": "0088-2502",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Apidra Solostar",
"NonProprietaryName": "Insulin Glulisine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20090224",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021629",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "INSULIN GLULISINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090224",
"SamplePackage": "N",
"IndicationAndUsage": "APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide."
},
{
"NDCCode": "10356-823-25",
"PackageDescription": "4.8 g in 1 TUBE (10356-823-25) ",
"NDC11Code": "10356-0823-25",
"ProductNDC": "10356-823",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nivea Recovery Medicated Lip Care",
"NonProprietaryName": "Dimethicone, Avobenzone, Octinoxate, Octocrylene",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151101",
"EndMarketingDate": "20221231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Beiersdorf Inc",
"SubstanceName": "AVOBENZONE; DIMETHICONE; OCTINOXATE; OCTOCRYLENE",
"StrengthNumber": "2.5; 1.2; 6; 1.8",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g",
"Pharm_Classes": "Skin Barrier Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151101",
"EndMarketingDatePackage": "20221231",
"SamplePackage": "N"
},
{
"NDCCode": "10695-114-19",
"PackageDescription": "13.823 kg in 1 DRUM (10695-114-19) ",
"NDC11Code": "10695-0114-19",
"ProductNDC": "10695-114",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Naltrexone Hcl",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250128",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Willow Birch Pharma Inc.",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-01-29",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "28-JAN-25"
},
{
"NDCCode": "11673-823-02",
"PackageDescription": "1 KIT in 1 BOTTLE (11673-823-02) * 354 mL in 1 BOTTLE, PLASTIC * 354 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "11673-0823-02",
"ProductNDC": "11673-823",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime And Nighttime Cherry",
"ProprietaryNameSuffix": "Cold And Flu",
"NonProprietaryName": "Daytime - Acetaminophen, Dextromethrophan Hbr, Phenylephrine Hcl Nighttime - Acetaminophen, Dextromethrophan Hbr, Doxylamine Succinate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "TARGET CORPORATION",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N"
},
{
"NDCCode": "11712-823-01",
"PackageDescription": "15 kg in 1 DRUM (11712-823-01) ",
"NDC11Code": "11712-0823-01",
"ProductNDC": "11712-823",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rilpivirine Free Base",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250204",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Delmar Chemicals Inc.",
"SubstanceName": "RILPIVIRINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-02-06",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-FEB-25"
},
{
"NDCCode": "13537-823-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-823-02) > 4 g in 1 TUBE (13537-823-01)",
"NDC11Code": "13537-0823-02",
"ProductNDC": "13537-823",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Hydracolor 2 In 1 Highly Moisturizing And Coloring Spf 25",
"ProprietaryNameSuffix": "(fucsia Amatista) - Pink",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161109",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".0664; .0151",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "14593-823-01",
"PackageDescription": "15000 g in 1 DRUM (14593-823-01) ",
"NDC11Code": "14593-0823-01",
"ProductNDC": "14593-823",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Carmustine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130404",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Emcure Pharmaceuticals Limited",
"SubstanceName": "CARMUSTINE",
"StrengthNumber": "130",
"StrengthUnit": "g/130g",
"Status": "Unfinished",
"LastUpdate": "2025-11-27",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-APR-13"
},
{
"NDCCode": "14593-823-02",
"PackageDescription": "50000 g in 1 DRUM (14593-823-02) ",
"NDC11Code": "14593-0823-02",
"ProductNDC": "14593-823",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Carmustine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130404",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Emcure Pharmaceuticals Limited",
"SubstanceName": "CARMUSTINE",
"StrengthNumber": "130",
"StrengthUnit": "g/130g",
"Status": "Unfinished",
"LastUpdate": "2025-11-27",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-APR-13"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>10135-823-33</NDCCode>
<PackageDescription>360 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-33) </PackageDescription>
<NDC11Code>10135-0823-33</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>51991-823-33</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (51991-823-33) </PackageDescription>
<NDC11Code>51991-0823-33</NDC11Code>
<ProductNDC>51991-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Everolimus</ProprietaryName>
<NonProprietaryName>Everolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205426</ApplicationNumber>
<LabelerName>Breckenridge Pharmaceutical, Inc.</LabelerName>
<SubstanceName>EVEROLIMUS</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Everolimus tablets are a kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with progressive neuroendocrine tumors of pancreatic origin (PNET) and adults with progressive, well-differentiated, non-functional neuroendocrine tumors (NET) of gastrointestinal (GI) or lung origin that are unresectable, locally advanced or metastatic.</IndicationAndUsage>
<Description>Everolimus Tablets and Everolimus Tablets for Oral Suspension are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18-dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contain 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, and magnesium stearate. Everolimus tablets for oral suspension for oral administration contains 2 mg, 3 mg, or 5 mg of everolimus and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, crospovidone, hypromellose, anhydrous lactose, magnesium stearate, mannitol, and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-05) </PackageDescription>
<NDC11Code>10135-0823-05</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-10) </PackageDescription>
<NDC11Code>10135-0823-10</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-30</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-30) </PackageDescription>
<NDC11Code>10135-0823-30</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-32</NDCCode>
<PackageDescription>180 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-32) </PackageDescription>
<NDC11Code>10135-0823-32</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-60</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-60) </PackageDescription>
<NDC11Code>10135-0823-60</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-62</NDCCode>
<PackageDescription>120 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-62) </PackageDescription>
<NDC11Code>10135-0823-62</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-823-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-823-90) </PackageDescription>
<NDC11Code>10135-0823-90</NDC11Code>
<ProductNDC>10135-823</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>0088-2500-33</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (0088-2500-33) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00088-2500-33</NDC11Code>
<ProductNDC>0088-2500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Apidra</ProprietaryName>
<NonProprietaryName>Insulin Glulisine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20090224</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021629</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLULISINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>10135-585-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-585-01)</PackageDescription>
<NDC11Code>10135-0585-01</NDC11Code>
<ProductNDC>10135-585</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-585-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-585-10)</PackageDescription>
<NDC11Code>10135-0585-10</NDC11Code>
<ProductNDC>10135-585</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-586-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-586-01)</PackageDescription>
<NDC11Code>10135-0586-01</NDC11Code>
<ProductNDC>10135-586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-586-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-586-10)</PackageDescription>
<NDC11Code>10135-0586-10</NDC11Code>
<ProductNDC>10135-586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-587-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-587-01)</PackageDescription>
<NDC11Code>10135-0587-01</NDC11Code>
<ProductNDC>10135-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-587-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-587-10)</PackageDescription>
<NDC11Code>10135-0587-10</NDC11Code>
<ProductNDC>10135-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-588-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-588-01)</PackageDescription>
<NDC11Code>10135-0588-01</NDC11Code>
<ProductNDC>10135-588</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-588-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-588-10)</PackageDescription>
<NDC11Code>10135-0588-10</NDC11Code>
<ProductNDC>10135-588</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine Succinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue#1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>10135-603-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10135-603-01)</PackageDescription>
<NDC11Code>10135-0603-01</NDC11Code>
<ProductNDC>10135-603</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extended Phenytoin Sodium</ProprietaryName>
<NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040765</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>PHENYTOIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Extended phenytoin sodium capsules, USP are indicated for the control of generalized tonic-clonic (grand mal) and complex partial (psychomotor, temporal lobe) seizures and prevention and treatment of seizures occurring during or following neurosurgery. Phenytoin serum level determinations may be necessary for optimal dosage adjustments (see DOSAGE AND ADMINISTRATION and CLINICAL PHARMACOLOGY sections).</IndicationAndUsage>
<Description>Phenytoin sodium, USP is an antiepileptic drug. Phenytoin sodium, USP is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione, having the following structural formula. Each extended phenytoin sodium capsule, USP contains 100 mg phenytoin sodium, USP. Each capsule also contains the following inactive ingredients: D&C Red #28, D&C Red #33, FD&C Blue #1, gelatin, hydroxypropyl cellulose, mannitol, magnesium stearate, talc and titanium dioxide. Product in vivo performance is characterized by a slow and extended rate of absorption with peak blood concentrations expected in 4 to 12 hours as contrasted to Prompt Phenytoin Sodium Capsules, USP with a rapid rate of absorption with peak blood concentration expected in 1½ to 3 hours.</Description>
</NDC>
<NDC>
<NDCCode>10135-603-10</NDCCode>
<PackageDescription>1000 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10135-603-10)</PackageDescription>
<NDC11Code>10135-0603-10</NDC11Code>
<ProductNDC>10135-603</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extended Phenytoin Sodium</ProprietaryName>
<NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040765</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>PHENYTOIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Extended phenytoin sodium capsules, USP are indicated for the control of generalized tonic-clonic (grand mal) and complex partial (psychomotor, temporal lobe) seizures and prevention and treatment of seizures occurring during or following neurosurgery. Phenytoin serum level determinations may be necessary for optimal dosage adjustments (see DOSAGE AND ADMINISTRATION and CLINICAL PHARMACOLOGY sections).</IndicationAndUsage>
<Description>Phenytoin sodium, USP is an antiepileptic drug. Phenytoin sodium, USP is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione, having the following structural formula. Each extended phenytoin sodium capsule, USP contains 100 mg phenytoin sodium, USP. Each capsule also contains the following inactive ingredients: D&C Red #28, D&C Red #33, FD&C Blue #1, gelatin, hydroxypropyl cellulose, mannitol, magnesium stearate, talc and titanium dioxide. Product in vivo performance is characterized by a slow and extended rate of absorption with peak blood concentrations expected in 4 to 12 hours as contrasted to Prompt Phenytoin Sodium Capsules, USP with a rapid rate of absorption with peak blood concentration expected in 1½ to 3 hours.</Description>
</NDC>
<NDC>
<NDCCode>0088-2500-34</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (0088-2500-34) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00088-2500-34</NDC11Code>
<ProductNDC>0088-2500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Apidra</ProprietaryName>
<NonProprietaryName>Insulin Glulisine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20090224</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021629</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLULISINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0088-2502-01</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0088-2502-01) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00088-2502-01</NDC11Code>
<ProductNDC>0088-2502</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Apidra Solostar</ProprietaryName>
<NonProprietaryName>Insulin Glulisine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20090224</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021629</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLULISINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0088-2502-05</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0088-2502-05) / 3 mL in 1 SYRINGE, PLASTIC (0088-2502-00) </PackageDescription>
<NDC11Code>00088-2502-05</NDC11Code>
<ProductNDC>0088-2502</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Apidra Solostar</ProprietaryName>
<NonProprietaryName>Insulin Glulisine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20090224</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021629</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLULISINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APIDRA is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glulisine is a rapid-acting human insulin analog used to lower blood glucose. Insulin glulisine is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli (K12). Insulin glulisine differs from human insulin in that the amino acid asparagine at position B3 is replaced by lysine and the lysine in position B29 is replaced by glutamic acid. Insulin glulisine has a molecular weight of 5.823 kDa. APIDRA (insulin glulisine) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each milliliter of APIDRA contains 100 units insulin glulisine, metacresol (3.15 mg), polysorbate 20 (0.01 mg), sodium chloride (5 mg), tromethamine (6 mg), and water for injection. APIDRA has a pH of approximately 7.3. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>10356-823-25</NDCCode>
<PackageDescription>4.8 g in 1 TUBE (10356-823-25) </PackageDescription>
<NDC11Code>10356-0823-25</NDC11Code>
<ProductNDC>10356-823</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nivea Recovery Medicated Lip Care</ProprietaryName>
<NonProprietaryName>Dimethicone, Avobenzone, Octinoxate, Octocrylene</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151101</StartMarketingDate>
<EndMarketingDate>20221231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Beiersdorf Inc</LabelerName>
<SubstanceName>AVOBENZONE; DIMETHICONE; OCTINOXATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>2.5; 1.2; 6; 1.8</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151101</StartMarketingDatePackage>
<EndMarketingDatePackage>20221231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>10695-114-19</NDCCode>
<PackageDescription>13.823 kg in 1 DRUM (10695-114-19) </PackageDescription>
<NDC11Code>10695-0114-19</NDC11Code>
<ProductNDC>10695-114</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Naltrexone Hcl</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250128</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Willow Birch Pharma Inc.</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-01-29</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-JAN-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>11673-823-02</NDCCode>
<PackageDescription>1 KIT in 1 BOTTLE (11673-823-02) * 354 mL in 1 BOTTLE, PLASTIC * 354 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>11673-0823-02</NDC11Code>
<ProductNDC>11673-823</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime And Nighttime Cherry</ProprietaryName>
<ProprietaryNameSuffix>Cold And Flu</ProprietaryNameSuffix>
<NonProprietaryName>Daytime - Acetaminophen, Dextromethrophan Hbr, Phenylephrine Hcl Nighttime - Acetaminophen, Dextromethrophan Hbr, Doxylamine Succinate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>TARGET CORPORATION</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11712-823-01</NDCCode>
<PackageDescription>15 kg in 1 DRUM (11712-823-01) </PackageDescription>
<NDC11Code>11712-0823-01</NDC11Code>
<ProductNDC>11712-823</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rilpivirine Free Base</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250204</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Delmar Chemicals Inc.</LabelerName>
<SubstanceName>RILPIVIRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-02-06</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-FEB-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>13537-823-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-823-02) > 4 g in 1 TUBE (13537-823-01)</PackageDescription>
<NDC11Code>13537-0823-02</NDC11Code>
<ProductNDC>13537-823</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Hydracolor 2 In 1 Highly Moisturizing And Coloring Spf 25</ProprietaryName>
<ProprietaryNameSuffix>(fucsia Amatista) - Pink</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161109</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.0664; .0151</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14593-823-01</NDCCode>
<PackageDescription>15000 g in 1 DRUM (14593-823-01) </PackageDescription>
<NDC11Code>14593-0823-01</NDC11Code>
<ProductNDC>14593-823</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Carmustine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130404</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Emcure Pharmaceuticals Limited</LabelerName>
<SubstanceName>CARMUSTINE</SubstanceName>
<StrengthNumber>130</StrengthNumber>
<StrengthUnit>g/130g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-27</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-APR-13</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14593-823-02</NDCCode>
<PackageDescription>50000 g in 1 DRUM (14593-823-02) </PackageDescription>
<NDC11Code>14593-0823-02</NDC11Code>
<ProductNDC>14593-823</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Carmustine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130404</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Emcure Pharmaceuticals Limited</LabelerName>
<SubstanceName>CARMUSTINE</SubstanceName>
<StrengthNumber>130</StrengthNumber>
<StrengthUnit>g/130g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-27</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-APR-13</StartMarketingDatePackage>
</NDC>
</NDCList>