{
"NDC": [
{
"NDCCode": "10144-342-16",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (10144-342-16) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-16",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181222",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "10144-342-04",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (10144-342-04) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-04",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "10144-342-12",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (10144-342-12) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-12",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "10144-342-32",
"PackageDescription": "8 BLISTER PACK in 1 CARTON (10144-342-32) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-32",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181222",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "10144-342-60",
"PackageDescription": "15 BLISTER PACK in 1 CARTON (10144-342-60) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-60",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181222",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "10144-342-92",
"PackageDescription": "23 BLISTER PACK in 1 CARTON (10144-342-92) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) ",
"NDC11Code": "10144-0342-92",
"ProductNDC": "10144-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inbrija",
"NonProprietaryName": "Levodopa",
"DosageFormName": "CAPSULE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209184",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181222",
"SamplePackage": "N",
"IndicationAndUsage": "INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.",
"Description": "INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state."
},
{
"NDCCode": "61703-342-22",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-342-22) / 16.7 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0342-22",
"ProductNDC": "61703-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076131",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040301",
"SamplePackage": "N",
"IndicationAndUsage": "Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, paclitaxel is indicated in combination with cisplatin. Paclitaxel is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptornegative tumors. (See CLINICAL STUDIES: Breast Carcinoma.). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel, in combination with cisplatin, is indicated for the first-line treatment of nonsmall cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel is indicated for the second-line treatment of AIDS-related Kaposi’s sarcoma.",
"Description": "Paclitaxel Injection, USP is a clear colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multiple-dose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, 527 mg of Polyoxyl 35 Castor Oil, NF, 49.7% (v/v) Dehydrated Alcohol, USP and 2 mg Citric Acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via an extraction process from Taxus X media ‘Hicksii’. The chemical name for paclitaxel is (2aR,4S,4aS,6R,9S,11S,12S,12aR,12bS)-1,2a,3,4,4a,6,9,10,11,12,12a,12b-Dodecahydro-4,6,9,11,12,-12b-hexahydroxy-4a,8,13,13-tetramethyl-7,11-methano-5H-cyclodeca [3,4] benz [1,2-b] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula. Paclitaxel is a white to off-white crystalline powder with the empirical formula C47H51NO14 and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216-217°C."
},
{
"NDCCode": "62756-342-16",
"PackageDescription": "5 kg in 1 DRUM (62756-342-16) ",
"NDC11Code": "62756-0342-16",
"ProductNDC": "62756-342",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Epinastine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SUN PHARMACEUTICAL INDUSTRIES, INC.",
"SubstanceName": "EPINASTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "kg/5kg",
"Status": "Unfinished",
"LastUpdate": "2026-02-13",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "28-AUG-15"
},
{
"NDCCode": "66689-342-16",
"PackageDescription": "1 BOTTLE in 1 CARTON (66689-342-16) / 473 mL in 1 BOTTLE",
"NDC11Code": "66689-0342-16",
"ProductNDC": "66689-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20210927",
"EndMarketingDate": "20250831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213951",
"LabelerName": "VistaPharm, LLC",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210927",
"EndMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "Acyclovir oral suspension, USP is indicated for the acute treatment of herpes zoster (shingles).",
"Description": "Acyclovir, USP is a synthetic nucleoside analogue active against herpes viruses. Acyclovir Oral Suspension, USP is a formulation for oral administration. Each teaspoonful (5 mL) of acyclovir oral suspension, USP contains 200 mg of acyclovir, USP and the inactive ingredients methylparaben 0.1% and propylparaben 0.02% (added as preservatives), carboxymethylcellulose sodium, flavor, glycerin, microcrystalline cellulose, purified water and sorbitol. Acyclovir, USP is a white to off white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225.20 The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir, USP are 2.52 and 9.35. The chemical name of acyclovir, USP is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
},
{
"NDCCode": "68047-342-16",
"PackageDescription": "473 mL in 1 BOTTLE (68047-342-16)",
"NDC11Code": "68047-0342-16",
"ProductNDC": "68047-342",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lohist Psb",
"NonProprietaryName": "Brompheniramine Maleate And Pseudoephedrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110106",
"EndMarketingDate": "20140228",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Larken Laboratories, Inc.",
"SubstanceName": "BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "4; 20",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2014-03-05"
},
{
"NDCCode": "74120-342-16",
"PackageDescription": "16 mL in 1 BOTTLE (74120-342-16) ",
"NDC11Code": "74120-0342-16",
"ProductNDC": "74120-342",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Smitty's Supply Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "80",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "82778-342-16",
"PackageDescription": "454 g in 1 JAR (82778-342-16) ",
"NDC11Code": "82778-0342-16",
"ProductNDC": "82778-342",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pinxav Daiper Rash",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20040330",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Emjay Laboratories Inc.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2024-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040330",
"SamplePackage": "N",
"IndicationAndUsage": "helps treat and prevent diaper rash. Protects chafed skin due to diaper rash and helps seal out wetness. dries the oozing and weeping of poison ivy, poison oak and poison sumac."
},
{
"NDCCode": "0116-4005-16",
"PackageDescription": "473 mL in 1 BOTTLE (0116-4005-16) ",
"NDC11Code": "00116-4005-16",
"ProductNDC": "0116-4005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075911",
"LabelerName": "Xttrium Laboratories, Inc.",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220701",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose solution is a synthetic disaccharide in solution form for oral administration. Each 15 mL of lactulose contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water, D&C Yellow No. 10, and FD&C Yellow No. 6. The pH range is 2.5 to 6.5. Lactulose solution is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. C 12H 220 11. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-0577-16",
"PackageDescription": "473 mL in 1 BOTTLE (0121-0577-16) ",
"NDC11Code": "00121-0577-16",
"ProductNDC": "0121-0577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19660730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19660730",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-0873-06",
"PackageDescription": "6 CARTON in 1 CASE (0121-0873-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 15 mL in 1 CUP, UNIT-DOSE",
"NDC11Code": "00121-0873-06",
"ProductNDC": "0121-0873",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20191203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20191203",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-0873-16",
"PackageDescription": "473 mL in 1 BOTTLE (0121-0873-16) ",
"NDC11Code": "00121-0873-16",
"ProductNDC": "0121-0873",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20191203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191203",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-1154-06",
"PackageDescription": "6 CARTON in 1 CASE (0121-1154-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 30 mL in 1 CUP, UNIT-DOSE (0121-1154-30) ",
"NDC11Code": "00121-1154-06",
"ProductNDC": "0121-1154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19660730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "20",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-1746-06",
"PackageDescription": "6 CARTON in 1 CASE (0121-1746-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 30 mL in 1 CUP, UNIT-DOSE (0121-1746-30) ",
"NDC11Code": "00121-1746-06",
"ProductNDC": "0121-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20191203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "20",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191203",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0121-4577-06",
"PackageDescription": "6 CARTON in 1 CASE (0121-4577-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 15 mL in 1 CUP, UNIT-DOSE",
"NDC11Code": "00121-4577-06",
"ProductNDC": "0121-4577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19660730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074623",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "0264-9379-88",
"PackageDescription": "10 AMPULE in 1 CARTON (0264-9379-88) / 2 mL in 1 AMPULE",
"NDC11Code": "00264-9379-88",
"ProductNDC": "0264-9379",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride With Dextrose",
"NonProprietaryName": "Bupivacaine Hydrochloride With Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "SUBARACHNOID",
"StartMarketingDate": "20190402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209087",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190402",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride in Dextrose Injection, USP is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).",
"Description": "Bupivacaine Hydrochloride in Dextrose Injection, USP is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for Bupivacaine Hydrochloride in Dextrose Injection, USP is by subarachnoid injection. Bupivacaine Hydrochloride contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6- dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. Bupivacaine Hydrochloride in Dextrose Injection, USP is a clear and colorless sterile hyperbaric solution. Each mL of Bupivacaine Hydrochloride in Dextrose Injection, USP contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. Bupivacaine Hydrochloride in Dextrose Injection, USP pH is between 4.0 and 6.5. The specific gravity of Bupivacaine Hydrochloride in Dextrose Injection, USP is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. Bupivacaine Hydrochloride in Dextrose Injection, USP does not contain any preservatives."
},
{
"NDCCode": "0404-9945-50",
"PackageDescription": "1 VIAL in 1 BAG (0404-9945-50) / 50 mL in 1 VIAL",
"NDC11Code": "00404-9945-50",
"ProductNDC": "0404-9945",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20220112",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220112",
"SamplePackage": "N",
"IndicationAndUsage": "SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].",
"Description": "SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPFin single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000(as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINEin multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000(as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5."
},
{
"NDCCode": "0409-1761-10",
"PackageDescription": "2 CELLO PACK in 1 CARTON (0409-1761-10) / 5 AMPULE in 1 CELLO PACK (0409-1761-05) / 2 mL in 1 AMPULE (0409-1761-18) ",
"NDC11Code": "00409-1761-10",
"ProductNDC": "0409-1761",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Marcaine Spinal",
"NonProprietaryName": "Bupivacaine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBARACHNOID",
"StartMarketingDate": "20050519",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018692",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220801",
"SamplePackage": "N",
"IndicationAndUsage": "MARCAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).",
"Description": "MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for MARCAINE SPINAL is by subarachnoid injection. MARCAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O∙HCl∙H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of MARCAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. MARCAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of MARCAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. MARCAINE SPINAL does not contain any preservatives."
},
{
"NDCCode": "0409-1761-62",
"PackageDescription": "800 AMPULE in 1 CASE (0409-1761-62) / 2 mL in 1 AMPULE (0409-1761-18) ",
"NDC11Code": "00409-1761-62",
"ProductNDC": "0409-1761",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Marcaine Spinal",
"NonProprietaryName": "Bupivacaine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBARACHNOID",
"StartMarketingDate": "20050519",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018692",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050519",
"SamplePackage": "N",
"IndicationAndUsage": "MARCAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).",
"Description": "MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for MARCAINE SPINAL is by subarachnoid injection. MARCAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O∙HCl∙H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of MARCAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. MARCAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of MARCAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. MARCAINE SPINAL does not contain any preservatives."
},
{
"NDCCode": "0409-3613-01",
"PackageDescription": "10 AMPULE in 1 CARTON (0409-3613-01) / 2 mL in 1 AMPULE (0409-3613-11) ",
"NDC11Code": "00409-3613-01",
"ProductNDC": "0409-3613",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine",
"ProprietaryNameSuffix": "Spinal",
"NonProprietaryName": "Bupivacaine Hydrochloride In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBARACHNOID",
"StartMarketingDate": "20050131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071810",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050131",
"SamplePackage": "N",
"IndicationAndUsage": "BUPIVACAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).",
"Description": "BUPIVACAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for BUPIVACAINE SPINAL is by subarachnoid injection. BUPIVACAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. BUPIVACAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of BUPIVACAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. BUPIVACAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of BUPIVACAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. BUPIVACAINE SPINAL does not contain any preservatives."
},
{
"NDCCode": "10702-342-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (10702-342-01) ",
"NDC11Code": "10702-0342-01",
"ProductNDC": "10702-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Apadaz",
"NonProprietaryName": "Benzhydrocodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190628",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208653",
"LabelerName": "KVK-Tech, Inc.",
"SubstanceName": "ACETAMINOPHEN; BENZHYDROCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 8.16",
"StrengthUnit": "mg/1; mg/1",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190628",
"SamplePackage": "N",
"IndicationAndUsage": "APADAZ is indicated for the short-term (no more than 14 days) management of acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [ see Warnings and Precautions (5.1)], reserve APADAZ for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "APADAZ (benzhydrocodone and acetaminophen) tablet is an immediate-release, fixed-dose combination of an opioid agonist and acetaminophen. APADAZ tablets are white to off-white, capsule shaped tablets that contain 4.08 mg, 6.12 mg, or 8.16 mg of benzhydrocodone (equivalent to 4.45 mg, 6.67 mg, 8.90 mg benzhydrocodone hydrochloride, respectively) and 325 mg of acetaminophen for oral administration. Benzhydrocodone hydrochloride is a prodrug of hydrocodone. It occurs as a fine white powder and is not affected by light. The chemical name is 6,7-didehydro-4,5α-epoxy-3-methoxy-17- methylmorphinan-6-yl benzoate hydrochloride. The molecular formula is C 25H 26ClNO 4, which corresponds to a molecular weight of 439.93 g/mol. It has the following chemical structure:. Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. The molecular formula for acetaminophen is C 8H 9NO 2, which corresponds to a molecular weight of 151.16 g/mol. It has the following structural formula:. APADAZ tablets contain 4.08 mg, 6.12 mg, or 8.16 mg of benzhydrocodone (equivalent to 4.45 mg, 6.67 mg, 8.90 mg benzhydrocodone hydrochloride, respectively) and 325 mg of acetaminophen and are white to off-white in color. In addition, each tablet contains the following inactive ingredients: crospovidone, microcrystalline cellulose, pregelatinized starch, Povidone K30, and stearic acid."
},
{
"NDCCode": "16729-189-16",
"PackageDescription": "500 TABLET, DELAYED RELEASE in 1 BOTTLE (16729-189-16) ",
"NDC11Code": "16729-0189-16",
"ProductNDC": "16729-189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolic Acid",
"NonProprietaryName": "Mycophenolic Acid",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202555",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "MYCOPHENOLATE SODIUM",
"StrengthNumber": "360",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260101",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolic acid is an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. ( 1.1) . Use in combination with cyclosporine and corticosteroids. ( 1.1) .",
"Description": "Mycophenolic acid delayed release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid delayed release is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5 -yl)-4- methylhex-4¬-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1 N hydrochloric acid. Mycophenolic acid delayed release tablets, USP are available for oral use as delayed release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include colloidal anhydrous silica, croscarmellose sodium, microcrystalline cellulose, magnesium stearate, povidone (K-30) and talc. The enteric coating of the tablet consists of colloidal anhydrous silica, FD&C Blue #2 aluminum lake (180 mg), iron oxide yellow, iron oxide red (360 mg), methacrylic acid copolymer type C, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide and triethyl citrate. The imprinting ink of the tablet consists of shellac, and iron oxide black."
},
{
"NDCCode": "16729-215-16",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (16729-215-16) ",
"NDC11Code": "16729-0215-16",
"ProductNDC": "16729-215",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202825",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180803",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide."
},
{
"NDCCode": "16729-216-16",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (16729-216-16) ",
"NDC11Code": "16729-0216-16",
"ProductNDC": "16729-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202825",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170213",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide."
},
{
"NDCCode": "16729-217-16",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (16729-217-16) ",
"NDC11Code": "16729-0217-16",
"ProductNDC": "16729-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202825",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170209",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide."
},
{
"NDCCode": "18124-002-16",
"PackageDescription": "473 mL in 1 BOTTLE (18124-002-16) ",
"NDC11Code": "18124-0002-16",
"ProductNDC": "18124-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL; RECTAL",
"StartMarketingDate": "20121210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090502",
"LabelerName": "Fresenius Kabi Austria GmbH",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2022-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121210",
"SamplePackage": "N",
"IndicationAndUsage": "For the prevention and treatment of portal-systemic encephalopathy, including the stages of hepatic pre-coma and coma. Controlled studies have shown that lactulose solution therapy reduces the blood ammonia levels by 25 to 50%; this is generally paralleled by an improvement in the patients' mental state and by an improvement in EEG patterns. The clinical response has been observed in about 75% of patients, which is at least as satisfactory as that resulting from neomycin therapy. An increase in patients' protein tolerance is also frequently observed with lactulose therapy. In the treatment of chronic portal-systemic encephalopathy, Lactulose has been given for over 2 years in controlled studies.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral or rectal administration. Each 15 mL of lactulose solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 0.1 g or less of fructose). Lactulose is a colonic acidifier for treatment and prevention of portal-systemic encephalopathy. The chemical name for lactulose is 4-O- β-D-galactopyranosyl-D-fructofuranose. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>10144-342-16</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (10144-342-16) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-16</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>10144-342-04</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (10144-342-04) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-04</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>10144-342-12</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (10144-342-12) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-12</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>10144-342-32</NDCCode>
<PackageDescription>8 BLISTER PACK in 1 CARTON (10144-342-32) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-32</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>10144-342-60</NDCCode>
<PackageDescription>15 BLISTER PACK in 1 CARTON (10144-342-60) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-60</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>10144-342-92</NDCCode>
<PackageDescription>23 BLISTER PACK in 1 CARTON (10144-342-92) / 4 CAPSULE in 1 BLISTER PACK (10144-342-01) </PackageDescription>
<NDC11Code>10144-0342-92</NDC11Code>
<ProductNDC>10144-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inbrija</ProprietaryName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209184</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INBRIJA is indicated for the intermittent treatment of OFF episodes in patients with Parkinson's disease treated with carbidopa/levodopa.</IndicationAndUsage>
<Description>INBRIJA consists of a dry powder formulation of levodopa for oral inhalation with the INBRIJA inhaler. The inhalation powder is packaged in white hypromellose capsules. Each capsule contains a spray-dried powder of 42 mg levodopa active ingredient with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and sodium chloride. The active component of INBRIJA is levodopa, an aromatic amino acid. Its chemical name is (2S)-2-amino-3-(3,4-dihydroxyphenyl) propanoic acid and its structural formula is. Levodopa has a molecular weight of 197.19 g/mol and molecular formula C 9H 11NO 4. Levodopa is a white to slightly off-white powder and is readily soluble in formic acid, slightly soluble in water, and practically insoluble in ethanol and diethyl ether; it dissolves in dilute hydrochloric acid. The INBRIJA inhaler is a plastic device with a blue body, blue cap, and white mouthpiece used for inhaling INBRIJA powder. The INBRIJA inhaler is breath-actuated by the patient. Under standardized in vitro testing conditions, the INBRIJA inhaler delivered 36.1 mg of levodopa (emitted dose) for the 42 mg capsule from the mouthpiece. No significant difference in emitted dose was observed when varying the flow rate and volume from 20 liters per minute/1L up to 90 liters per minute/2L. Peak inspiratory flow rates (PIFR) achievable through the INBRIJA inhaler were evaluated in 24 adult patients with mild to moderate Parkinson's disease. The mean PIFR was 64 L/min (range 39–98 L/min) for patients in the ON state and 57 L/min (range 29–98 L/min) in the OFF state.</Description>
</NDC>
<NDC>
<NDCCode>61703-342-22</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-342-22) / 16.7 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0342-22</NDC11Code>
<ProductNDC>61703-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076131</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, paclitaxel is indicated in combination with cisplatin. Paclitaxel is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptornegative tumors. (See CLINICAL STUDIES: Breast Carcinoma.). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel, in combination with cisplatin, is indicated for the first-line treatment of nonsmall cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel is indicated for the second-line treatment of AIDS-related Kaposi’s sarcoma.</IndicationAndUsage>
<Description>Paclitaxel Injection, USP is a clear colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multiple-dose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, 527 mg of Polyoxyl 35 Castor Oil, NF, 49.7% (v/v) Dehydrated Alcohol, USP and 2 mg Citric Acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via an extraction process from Taxus X media ‘Hicksii’. The chemical name for paclitaxel is (2aR,4S,4aS,6R,9S,11S,12S,12aR,12bS)-1,2a,3,4,4a,6,9,10,11,12,12a,12b-Dodecahydro-4,6,9,11,12,-12b-hexahydroxy-4a,8,13,13-tetramethyl-7,11-methano-5H-cyclodeca [3,4] benz [1,2-b] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula. Paclitaxel is a white to off-white crystalline powder with the empirical formula C47H51NO14 and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216-217°C.</Description>
</NDC>
<NDC>
<NDCCode>62756-342-16</NDCCode>
<PackageDescription>5 kg in 1 DRUM (62756-342-16) </PackageDescription>
<NDC11Code>62756-0342-16</NDC11Code>
<ProductNDC>62756-342</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Epinastine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SUN PHARMACEUTICAL INDUSTRIES, INC.</LabelerName>
<SubstanceName>EPINASTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>kg/5kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-02-13</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-AUG-15</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>66689-342-16</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (66689-342-16) / 473 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>66689-0342-16</NDC11Code>
<ProductNDC>66689-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210927</StartMarketingDate>
<EndMarketingDate>20250831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213951</ApplicationNumber>
<LabelerName>VistaPharm, LLC</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210927</StartMarketingDatePackage>
<EndMarketingDatePackage>20250831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acyclovir oral suspension, USP is indicated for the acute treatment of herpes zoster (shingles).</IndicationAndUsage>
<Description>Acyclovir, USP is a synthetic nucleoside analogue active against herpes viruses. Acyclovir Oral Suspension, USP is a formulation for oral administration. Each teaspoonful (5 mL) of acyclovir oral suspension, USP contains 200 mg of acyclovir, USP and the inactive ingredients methylparaben 0.1% and propylparaben 0.02% (added as preservatives), carboxymethylcellulose sodium, flavor, glycerin, microcrystalline cellulose, purified water and sorbitol. Acyclovir, USP is a white to off white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225.20 The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir, USP are 2.52 and 9.35. The chemical name of acyclovir, USP is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>68047-342-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (68047-342-16)</PackageDescription>
<NDC11Code>68047-0342-16</NDC11Code>
<ProductNDC>68047-342</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lohist Psb</ProprietaryName>
<NonProprietaryName>Brompheniramine Maleate And Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110106</StartMarketingDate>
<EndMarketingDate>20140228</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Larken Laboratories, Inc.</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4; 20</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-03-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>74120-342-16</NDCCode>
<PackageDescription>16 mL in 1 BOTTLE (74120-342-16) </PackageDescription>
<NDC11Code>74120-0342-16</NDC11Code>
<ProductNDC>74120-342</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Smitty's Supply Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>82778-342-16</NDCCode>
<PackageDescription>454 g in 1 JAR (82778-342-16) </PackageDescription>
<NDC11Code>82778-0342-16</NDC11Code>
<ProductNDC>82778-342</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pinxav Daiper Rash</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20040330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Emjay Laboratories Inc.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps treat and prevent diaper rash. Protects chafed skin due to diaper rash and helps seal out wetness. dries the oozing and weeping of poison ivy, poison oak and poison sumac.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0116-4005-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (0116-4005-16) </PackageDescription>
<NDC11Code>00116-4005-16</NDC11Code>
<ProductNDC>0116-4005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075911</ApplicationNumber>
<LabelerName>Xttrium Laboratories, Inc.</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose solution is a synthetic disaccharide in solution form for oral administration. Each 15 mL of lactulose contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water, D&C Yellow No. 10, and FD&C Yellow No. 6. The pH range is 2.5 to 6.5. Lactulose solution is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. C 12H 220 11. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-0577-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (0121-0577-16) </PackageDescription>
<NDC11Code>00121-0577-16</NDC11Code>
<ProductNDC>0121-0577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19660730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19660730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-0873-06</NDCCode>
<PackageDescription>6 CARTON in 1 CASE (0121-0873-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 15 mL in 1 CUP, UNIT-DOSE</PackageDescription>
<NDC11Code>00121-0873-06</NDC11Code>
<ProductNDC>0121-0873</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-0873-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (0121-0873-16) </PackageDescription>
<NDC11Code>00121-0873-16</NDC11Code>
<ProductNDC>0121-0873</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-1154-06</NDCCode>
<PackageDescription>6 CARTON in 1 CASE (0121-1154-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 30 mL in 1 CUP, UNIT-DOSE (0121-1154-30) </PackageDescription>
<NDC11Code>00121-1154-06</NDC11Code>
<ProductNDC>0121-1154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19660730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-1746-06</NDCCode>
<PackageDescription>6 CARTON in 1 CASE (0121-1746-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 30 mL in 1 CUP, UNIT-DOSE (0121-1746-30) </PackageDescription>
<NDC11Code>00121-1746-06</NDC11Code>
<ProductNDC>0121-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0121-4577-06</NDCCode>
<PackageDescription>6 CARTON in 1 CASE (0121-4577-06) / 16 CUP, UNIT-DOSE in 1 CARTON / 15 mL in 1 CUP, UNIT-DOSE</PackageDescription>
<NDC11Code>00121-4577-06</NDC11Code>
<ProductNDC>0121-4577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19660730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074623</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains FD&C Yellow No. 6, purified water, and flavoring. Sodium hydroxide used to adjust pH. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-0-ß-D-galactopyranosyl-D-fructofuranose. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0264-9379-88</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0264-9379-88) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00264-9379-88</NDC11Code>
<ProductNDC>0264-9379</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride With Dextrose</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride With Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBARACHNOID</RouteName>
<StartMarketingDate>20190402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209087</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride in Dextrose Injection, USP is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride in Dextrose Injection, USP is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for Bupivacaine Hydrochloride in Dextrose Injection, USP is by subarachnoid injection. Bupivacaine Hydrochloride contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6- dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. Bupivacaine Hydrochloride in Dextrose Injection, USP is a clear and colorless sterile hyperbaric solution. Each mL of Bupivacaine Hydrochloride in Dextrose Injection, USP contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. Bupivacaine Hydrochloride in Dextrose Injection, USP pH is between 4.0 and 6.5. The specific gravity of Bupivacaine Hydrochloride in Dextrose Injection, USP is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. Bupivacaine Hydrochloride in Dextrose Injection, USP does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0404-9945-50</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9945-50) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9945-50</NDC11Code>
<ProductNDC>0404-9945</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20220112</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPFin single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000(as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINEin multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000(as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>0409-1761-10</NDCCode>
<PackageDescription>2 CELLO PACK in 1 CARTON (0409-1761-10) / 5 AMPULE in 1 CELLO PACK (0409-1761-05) / 2 mL in 1 AMPULE (0409-1761-18) </PackageDescription>
<NDC11Code>00409-1761-10</NDC11Code>
<ProductNDC>0409-1761</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Marcaine Spinal</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBARACHNOID</RouteName>
<StartMarketingDate>20050519</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018692</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MARCAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).</IndicationAndUsage>
<Description>MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for MARCAINE SPINAL is by subarachnoid injection. MARCAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O∙HCl∙H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of MARCAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. MARCAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of MARCAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. MARCAINE SPINAL does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0409-1761-62</NDCCode>
<PackageDescription>800 AMPULE in 1 CASE (0409-1761-62) / 2 mL in 1 AMPULE (0409-1761-18) </PackageDescription>
<NDC11Code>00409-1761-62</NDC11Code>
<ProductNDC>0409-1761</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Marcaine Spinal</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBARACHNOID</RouteName>
<StartMarketingDate>20050519</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018692</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MARCAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).</IndicationAndUsage>
<Description>MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for MARCAINE SPINAL is by subarachnoid injection. MARCAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O∙HCl∙H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. MARCAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of MARCAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. MARCAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of MARCAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. MARCAINE SPINAL does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>0409-3613-01</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0409-3613-01) / 2 mL in 1 AMPULE (0409-3613-11) </PackageDescription>
<NDC11Code>00409-3613-01</NDC11Code>
<ProductNDC>0409-3613</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine</ProprietaryName>
<ProprietaryNameSuffix>Spinal</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBARACHNOID</RouteName>
<StartMarketingDate>20050131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071810</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BUPIVACAINE SPINAL is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).</IndicationAndUsage>
<Description>BUPIVACAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for BUPIVACAINE SPINAL is by subarachnoid injection. BUPIVACAINE SPINAL contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. BUPIVACAINE SPINAL (bupivacaine hydrochloride in dextrose injection) is a clear and colorless sterile hyperbaric solution. Each mL of BUPIVACAINE SPINAL contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. BUPIVACAINE SPINAL pH is between 4.0 and 6.5. The specific gravity of BUPIVACAINE SPINAL is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. BUPIVACAINE SPINAL does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>10702-342-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (10702-342-01) </PackageDescription>
<NDC11Code>10702-0342-01</NDC11Code>
<ProductNDC>10702-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Apadaz</ProprietaryName>
<NonProprietaryName>Benzhydrocodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190628</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208653</ApplicationNumber>
<LabelerName>KVK-Tech, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; BENZHYDROCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 8.16</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APADAZ is indicated for the short-term (no more than 14 days) management of acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [ see Warnings and Precautions (5.1)], reserve APADAZ for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>APADAZ (benzhydrocodone and acetaminophen) tablet is an immediate-release, fixed-dose combination of an opioid agonist and acetaminophen. APADAZ tablets are white to off-white, capsule shaped tablets that contain 4.08 mg, 6.12 mg, or 8.16 mg of benzhydrocodone (equivalent to 4.45 mg, 6.67 mg, 8.90 mg benzhydrocodone hydrochloride, respectively) and 325 mg of acetaminophen for oral administration. Benzhydrocodone hydrochloride is a prodrug of hydrocodone. It occurs as a fine white powder and is not affected by light. The chemical name is 6,7-didehydro-4,5α-epoxy-3-methoxy-17- methylmorphinan-6-yl benzoate hydrochloride. The molecular formula is C 25H 26ClNO 4, which corresponds to a molecular weight of 439.93 g/mol. It has the following chemical structure:. Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. The molecular formula for acetaminophen is C 8H 9NO 2, which corresponds to a molecular weight of 151.16 g/mol. It has the following structural formula:. APADAZ tablets contain 4.08 mg, 6.12 mg, or 8.16 mg of benzhydrocodone (equivalent to 4.45 mg, 6.67 mg, 8.90 mg benzhydrocodone hydrochloride, respectively) and 325 mg of acetaminophen and are white to off-white in color. In addition, each tablet contains the following inactive ingredients: crospovidone, microcrystalline cellulose, pregelatinized starch, Povidone K30, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>16729-189-16</NDCCode>
<PackageDescription>500 TABLET, DELAYED RELEASE in 1 BOTTLE (16729-189-16) </PackageDescription>
<NDC11Code>16729-0189-16</NDC11Code>
<ProductNDC>16729-189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolic Acid</ProprietaryName>
<NonProprietaryName>Mycophenolic Acid</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202555</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE SODIUM</SubstanceName>
<StrengthNumber>360</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolic acid is an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. ( 1.1) . Use in combination with cyclosporine and corticosteroids. ( 1.1) .</IndicationAndUsage>
<Description>Mycophenolic acid delayed release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid delayed release is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5 -yl)-4- methylhex-4¬-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1 N hydrochloric acid. Mycophenolic acid delayed release tablets, USP are available for oral use as delayed release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include colloidal anhydrous silica, croscarmellose sodium, microcrystalline cellulose, magnesium stearate, povidone (K-30) and talc. The enteric coating of the tablet consists of colloidal anhydrous silica, FD&C Blue #2 aluminum lake (180 mg), iron oxide yellow, iron oxide red (360 mg), methacrylic acid copolymer type C, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide and triethyl citrate. The imprinting ink of the tablet consists of shellac, and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>16729-215-16</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (16729-215-16) </PackageDescription>
<NDC11Code>16729-0215-16</NDC11Code>
<ProductNDC>16729-215</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202825</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16729-216-16</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (16729-216-16) </PackageDescription>
<NDC11Code>16729-0216-16</NDC11Code>
<ProductNDC>16729-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202825</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16729-217-16</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (16729-217-16) </PackageDescription>
<NDC11Code>16729-0217-16</NDC11Code>
<ProductNDC>16729-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202825</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>18124-002-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (18124-002-16) </PackageDescription>
<NDC11Code>18124-0002-16</NDC11Code>
<ProductNDC>18124-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL; RECTAL</RouteName>
<StartMarketingDate>20121210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090502</ApplicationNumber>
<LabelerName>Fresenius Kabi Austria GmbH</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the prevention and treatment of portal-systemic encephalopathy, including the stages of hepatic pre-coma and coma. Controlled studies have shown that lactulose solution therapy reduces the blood ammonia levels by 25 to 50%; this is generally paralleled by an improvement in the patients' mental state and by an improvement in EEG patterns. The clinical response has been observed in about 75% of patients, which is at least as satisfactory as that resulting from neomycin therapy. An increase in patients' protein tolerance is also frequently observed with lactulose therapy. In the treatment of chronic portal-systemic encephalopathy, Lactulose has been given for over 2 years in controlled studies.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral or rectal administration. Each 15 mL of lactulose solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 0.1 g or less of fructose). Lactulose is a colonic acidifier for treatment and prevention of portal-systemic encephalopathy. The chemical name for lactulose is 4-O- β-D-galactopyranosyl-D-fructofuranose. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
</NDCList>