{
"NDC": [
{
"NDCCode": "10544-378-56",
"PackageDescription": "56 TABLET in 1 BOTTLE (10544-378-56)",
"NDC11Code": "10544-0378-56",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "62135-008-56",
"PackageDescription": "378 g in 1 CAN (62135-008-56) ",
"NDC11Code": "62135-0008-56",
"ProductNDC": "62135-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine For Oral Suspension",
"NonProprietaryName": "Cholestyramine For Oral Suspension",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "19960815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074561",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230103",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). †Other risk factors for coronary heart disease (CHD) include: age (males 45 years; females: 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C <35 mg/dL (<0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is 60 mg/dL (1.6 mmol/L). Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression 3 of coronary atherosclerosis. 2) Cholestyramine is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each 9 grams of Cholestyramine for Oral Suspension, USP powder contains 4 grams of cholestyramine resin. Each 5.7 grams of Cholestyramine for Oral Suspension, USP Light powder contains 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Cholestyramine for Oral Suspension, USP inactive ingredients: citric acid anhydrous, pectin, propylene glycol alginate, sorbitol, sucrose, mono ammonium glycyrrhizinate, fructose, xanthan gum, artificial strawberry flavor, and D&C red No. 30 aluminum lake. Cholestyramine for Oral Suspension, USP Light inactive ingredients: aspartame, citric acid anhydrous, colloidal silicon dioxide, fructose, mannitol, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, xanthan gum, artificial strawberry flavor, and D&C red No. 30 aluminum lake."
},
{
"NDCCode": "10544-374-56",
"PackageDescription": "56 TABLET in 1 BOTTLE (10544-374-56)",
"NDC11Code": "10544-0374-56",
"ProductNDC": "10544-374",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078273",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-381-56",
"PackageDescription": "56 TABLET in 1 BOTTLE (10544-381-56)",
"NDC11Code": "10544-0381-56",
"ProductNDC": "10544-381",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride",
"NonProprietaryName": "Oxycodone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077290",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-378-02",
"PackageDescription": "112 TABLET in 1 BOTTLE (10544-378-02)",
"NDC11Code": "10544-0378-02",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-378-08",
"PackageDescription": "168 TABLET in 1 BOTTLE (10544-378-08)",
"NDC11Code": "10544-0378-08",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-378-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (10544-378-28)",
"NDC11Code": "10544-0378-28",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-378-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10544-378-30)",
"NDC11Code": "10544-0378-30",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "10544-378-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (10544-378-60)",
"NDC11Code": "10544-0378-60",
"ProductNDC": "10544-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-01-23"
},
{
"NDCCode": "75321-1016-2",
"PackageDescription": "473.18 mL in 1 BOTTLE (75321-1016-2) ",
"NDC11Code": "75321-1016-02",
"ProductNDC": "75321-1016",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "SunBeam Laboratories LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "378.56",
"StrengthUnit": "mL/473.18mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "10544-296-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (10544-296-20)",
"NDC11Code": "10544-0296-20",
"ProductNDC": "10544-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062936",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-296-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (10544-296-28)",
"NDC11Code": "10544-0296-28",
"ProductNDC": "10544-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062936",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-296-40",
"PackageDescription": "40 TABLET in 1 BOTTLE (10544-296-40)",
"NDC11Code": "10544-0296-40",
"ProductNDC": "10544-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062936",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-297-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (10544-297-20)",
"NDC11Code": "10544-0297-20",
"ProductNDC": "10544-297",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062935",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-297-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (10544-297-28)",
"NDC11Code": "10544-0297-28",
"ProductNDC": "10544-297",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062935",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-297-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10544-297-30)",
"NDC11Code": "10544-0297-30",
"ProductNDC": "10544-297",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062935",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "10544-297-40",
"PackageDescription": "40 TABLET in 1 BOTTLE (10544-297-40)",
"NDC11Code": "10544-0297-40",
"ProductNDC": "10544-297",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062935",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF."
},
{
"NDCCode": "0185-0940-97",
"PackageDescription": "378 g in 1 CAN (0185-0940-97) ",
"NDC11Code": "00185-0940-97",
"ProductNDC": "0185-0940",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19960815",
"EndMarketingDate": "20250930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074557",
"LabelerName": "Eon Labs, Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19960815",
"EndMarketingDatePackage": "20250930",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for Oral Suspension, USP powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&C yellow No. 10 aluminum lake, FD&C yellow No. 6 aluminum lake."
},
{
"NDCCode": "0245-0536-37",
"PackageDescription": "378 g in 1 CAN (0245-0536-37) ",
"NDC11Code": "00245-0536-37",
"ProductNDC": "0245-0536",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19960815",
"EndMarketingDate": "20230930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074557",
"LabelerName": "Upsher-Smith Laboratories, Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120105",
"EndMarketingDatePackage": "20210930",
"SamplePackage": "N"
},
{
"NDCCode": "0378-4270-93",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-4270-93) ",
"NDC11Code": "00378-4270-93",
"ProductNDC": "0378-4270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208441",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190429",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. .",
"Description": "Ambrisentan tablets contain ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Ambrisentan is a white to off-white powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Each round, pink ambrisentan tablet contains 5 mg of ambrisentan. Each capsule shaped, pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored."
},
{
"NDCCode": "0378-4271-93",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-4271-93) ",
"NDC11Code": "00378-4271-93",
"ProductNDC": "0378-4271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208441",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190429",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. .",
"Description": "Ambrisentan tablets contain ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Ambrisentan is a white to off-white powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Each round, pink ambrisentan tablet contains 5 mg of ambrisentan. Each capsule shaped, pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored."
},
{
"NDCCode": "0409-1005-20",
"PackageDescription": "20 POUCH in 1 CASE (0409-1005-20) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0409-1005-01) ",
"NDC11Code": "00409-1005-20",
"ProductNDC": "0409-1005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018916",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230227",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0409-2222-12",
"PackageDescription": "12 POUCH in 1 CASE (0409-2222-12) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG (0409-2222-01) ",
"NDC11Code": "00409-2222-12",
"ProductNDC": "0409-2222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018916",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230227",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0409-7620-03",
"PackageDescription": "18 POUCH in 1 CASE (0409-7620-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0409-7620-13) ",
"NDC11Code": "00409-7620-03",
"ProductNDC": "0409-7620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018916",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050331",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0409-7620-59",
"PackageDescription": "12 POUCH in 1 CASE (0409-7620-59) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG (0409-7620-49) ",
"NDC11Code": "00409-7620-59",
"ProductNDC": "0409-7620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018916",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050331",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0591-2405-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0591-2405-30) ",
"NDC11Code": "00591-2405-30",
"ProductNDC": "0591-2405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208252",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190430",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)]. .",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1: Ambrisentan Structural Formula. Ambrisentan is a white to light yellow, crystalline powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 5 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Each 10 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Ambrisentan tablets are unscored."
},
{
"NDCCode": "0591-2406-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0591-2406-30) ",
"NDC11Code": "00591-2406-30",
"ProductNDC": "0591-2406",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208252",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190430",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)]. .",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1: Ambrisentan Structural Formula. Ambrisentan is a white to light yellow, crystalline powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 5 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Each 10 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Ambrisentan tablets are unscored."
},
{
"NDCCode": "0832-0536-60",
"PackageDescription": "60 CAN in 1 CARTON (0832-0536-60) / 378 g in 1 CAN (0832-0536-37) ",
"NDC11Code": "00832-0536-60",
"ProductNDC": "0832-0536",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20220121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214877",
"LabelerName": "Upsher-Smith Laboratories,LLC",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220121",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for oral suspension powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low-density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern.Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight.Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation:LDL-C = Total cholesterol - [(TG/5) + HDL-C] For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated.Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered.Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available, then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below.",
"Description": "Cholestyramine for oral suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Nine grams of cholestyramine for oral suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Cholestyramine for oral suspension, USP powder contains the following inactive ingredients: acacia, anhydrous citric acid, D&C Yellow No. 10 Aluminum Lake, orange flavor (containing; modified food starch [with added corn syrup], maltodextrin, citric acid, silicon dioxide and natural tocopherols), propylene glycol alginate and sucrose."
},
{
"NDCCode": "10812-378-01",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (10812-378-01) > 118 mL in 1 BOTTLE, PUMP",
"NDC11Code": "10812-0378-01",
"ProductNDC": "10812-378",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neutrogena Ultra Gentle Soothing",
"ProprietaryNameSuffix": "Spf15",
"NonProprietaryName": "Avobenzone, Octinoxate, And Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110501",
"EndMarketingDate": "20160921",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Neutrogena Corporation",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "30; 75; 20",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "11673-378-90",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (11673-378-90) ",
"NDC11Code": "11673-0378-90",
"ProductNDC": "11673-378",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210527",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Target Corporation",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210527",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: 1 headache, 2 muscle pain, 3 toothache, 4 menstrual pain, 5 colds, 6 minor pain of arthritis, 7 temporarily reduces fever."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>10544-378-56</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (10544-378-56)</PackageDescription>
<NDC11Code>10544-0378-56</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>62135-008-56</NDCCode>
<PackageDescription>378 g in 1 CAN (62135-008-56) </PackageDescription>
<NDC11Code>62135-0008-56</NDC11Code>
<ProductNDC>62135-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine For Oral Suspension</ProprietaryName>
<NonProprietaryName>Cholestyramine For Oral Suspension</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074561</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). †Other risk factors for coronary heart disease (CHD) include: age (males 45 years; females: 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C <35 mg/dL (<0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is 60 mg/dL (1.6 mmol/L). Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression 3 of coronary atherosclerosis. 2) Cholestyramine is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each 9 grams of Cholestyramine for Oral Suspension, USP powder contains 4 grams of cholestyramine resin. Each 5.7 grams of Cholestyramine for Oral Suspension, USP Light powder contains 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Cholestyramine for Oral Suspension, USP inactive ingredients: citric acid anhydrous, pectin, propylene glycol alginate, sorbitol, sucrose, mono ammonium glycyrrhizinate, fructose, xanthan gum, artificial strawberry flavor, and D&C red No. 30 aluminum lake. Cholestyramine for Oral Suspension, USP Light inactive ingredients: aspartame, citric acid anhydrous, colloidal silicon dioxide, fructose, mannitol, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, xanthan gum, artificial strawberry flavor, and D&C red No. 30 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>10544-374-56</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (10544-374-56)</PackageDescription>
<NDC11Code>10544-0374-56</NDC11Code>
<ProductNDC>10544-374</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078273</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-381-56</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (10544-381-56)</PackageDescription>
<NDC11Code>10544-0381-56</NDC11Code>
<ProductNDC>10544-381</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077290</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-378-02</NDCCode>
<PackageDescription>112 TABLET in 1 BOTTLE (10544-378-02)</PackageDescription>
<NDC11Code>10544-0378-02</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-378-08</NDCCode>
<PackageDescription>168 TABLET in 1 BOTTLE (10544-378-08)</PackageDescription>
<NDC11Code>10544-0378-08</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-378-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (10544-378-28)</PackageDescription>
<NDC11Code>10544-0378-28</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-378-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10544-378-30)</PackageDescription>
<NDC11Code>10544-0378-30</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-378-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (10544-378-60)</PackageDescription>
<NDC11Code>10544-0378-60</NDC11Code>
<ProductNDC>10544-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-01-23</LastUpdate>
</NDC>
<NDC>
<NDCCode>75321-1016-2</NDCCode>
<PackageDescription>473.18 mL in 1 BOTTLE (75321-1016-2) </PackageDescription>
<NDC11Code>75321-1016-02</NDC11Code>
<ProductNDC>75321-1016</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>SunBeam Laboratories LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>378.56</StrengthNumber>
<StrengthUnit>mL/473.18mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10544-296-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (10544-296-20)</PackageDescription>
<NDC11Code>10544-0296-20</NDC11Code>
<ProductNDC>10544-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062936</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-296-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (10544-296-28)</PackageDescription>
<NDC11Code>10544-0296-28</NDC11Code>
<ProductNDC>10544-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062936</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-296-40</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE (10544-296-40)</PackageDescription>
<NDC11Code>10544-0296-40</NDC11Code>
<ProductNDC>10544-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062936</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-297-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (10544-297-20)</PackageDescription>
<NDC11Code>10544-0297-20</NDC11Code>
<ProductNDC>10544-297</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062935</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-297-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (10544-297-28)</PackageDescription>
<NDC11Code>10544-0297-28</NDC11Code>
<ProductNDC>10544-297</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062935</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-297-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10544-297-30)</PackageDescription>
<NDC11Code>10544-0297-30</NDC11Code>
<ProductNDC>10544-297</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062935</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>10544-297-40</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE (10544-297-40)</PackageDescription>
<NDC11Code>10544-0297-40</NDC11Code>
<ProductNDC>10544-297</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062935</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
</NDC>
<NDC>
<NDCCode>0185-0940-97</NDCCode>
<PackageDescription>378 g in 1 CAN (0185-0940-97) </PackageDescription>
<NDC11Code>00185-0940-97</NDC11Code>
<ProductNDC>0185-0940</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960815</StartMarketingDate>
<EndMarketingDate>20250930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074557</ApplicationNumber>
<LabelerName>Eon Labs, Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19960815</StartMarketingDatePackage>
<EndMarketingDatePackage>20250930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for Oral Suspension, USP powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&C yellow No. 10 aluminum lake, FD&C yellow No. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>0245-0536-37</NDCCode>
<PackageDescription>378 g in 1 CAN (0245-0536-37) </PackageDescription>
<NDC11Code>00245-0536-37</NDC11Code>
<ProductNDC>0245-0536</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960815</StartMarketingDate>
<EndMarketingDate>20230930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074557</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120105</StartMarketingDatePackage>
<EndMarketingDatePackage>20210930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-4270-93</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-4270-93) </PackageDescription>
<NDC11Code>00378-4270-93</NDC11Code>
<ProductNDC>0378-4270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208441</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. .</IndicationAndUsage>
<Description>Ambrisentan tablets contain ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Ambrisentan is a white to off-white powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Each round, pink ambrisentan tablet contains 5 mg of ambrisentan. Each capsule shaped, pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>0378-4271-93</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-4271-93) </PackageDescription>
<NDC11Code>00378-4271-93</NDC11Code>
<ProductNDC>0378-4271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208441</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. .</IndicationAndUsage>
<Description>Ambrisentan tablets contain ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Ambrisentan is a white to off-white powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Each round, pink ambrisentan tablet contains 5 mg of ambrisentan. Each capsule shaped, pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>0409-1005-20</NDCCode>
<PackageDescription>20 POUCH in 1 CASE (0409-1005-20) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0409-1005-01) </PackageDescription>
<NDC11Code>00409-1005-20</NDC11Code>
<ProductNDC>0409-1005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018916</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-2222-12</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-2222-12) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG (0409-2222-01) </PackageDescription>
<NDC11Code>00409-2222-12</NDC11Code>
<ProductNDC>0409-2222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018916</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-7620-03</NDCCode>
<PackageDescription>18 POUCH in 1 CASE (0409-7620-03) / 1 BAG in 1 POUCH / 500 mL in 1 BAG (0409-7620-13) </PackageDescription>
<NDC11Code>00409-7620-03</NDC11Code>
<ProductNDC>0409-7620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050331</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018916</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-7620-59</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-7620-59) / 1 BAG in 1 POUCH / 1000 mL in 1 BAG (0409-7620-49) </PackageDescription>
<NDC11Code>00409-7620-59</NDC11Code>
<ProductNDC>0409-7620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050331</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018916</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in Sodium Chloride Injection at a concentration of 2 units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Intravenous solutions with heparin sodium (derived from porcine intestinal mucosa) are sterile, nonpyrogenic fluids for intravenous administration. Each 100 mL contains heparin sodium 200 USP Units; sodium chloride, 0.9 g; citric acid, monohydrate, 40 mg and dibasic sodium phosphate, heptahydrate, 434 mg added as buffers. Each liter contains the following electrolytes: Sodium 186.4 mEq; phosphate (as HPO4=) 32.4 mEq, citrate 5.7 mEq and chloride 154 mEq. Osmolar concentration, 378 mOsmol/liter (calc.); pH 7.0 (5.0 – 7.5). Heparin Sodium, USP is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose-6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. Dibasic Sodium Phosphate, USP (heptahydrate), is chemically designated (Na2HPO4 ∙ 7H2O), colorless or white granular salt freely soluble in water. Citric Acid, USP, hydrous (monohydrate) is chemically designated C6H8O7 ∙ H2O, colorless, translucent crystals or white crystalline powder very soluble in water. It has the following structural formula. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from either polyvinylchloride or polyolefin plastic. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0591-2405-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0591-2405-30) </PackageDescription>
<NDC11Code>00591-2405-30</NDC11Code>
<ProductNDC>0591-2405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208252</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)]. .</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1: Ambrisentan Structural Formula. Ambrisentan is a white to light yellow, crystalline powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 5 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Each 10 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>0591-2406-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0591-2406-30) </PackageDescription>
<NDC11Code>00591-2406-30</NDC11Code>
<ProductNDC>0591-2406</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208252</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)]. .</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1: Ambrisentan Structural Formula. Ambrisentan is a white to light yellow, crystalline powder. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 5 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Each 10 mg ambrisentan film-coated tablet is white to off-white and capsule shaped. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>0832-0536-60</NDCCode>
<PackageDescription>60 CAN in 1 CARTON (0832-0536-60) / 378 g in 1 CAN (0832-0536-37) </PackageDescription>
<NDC11Code>00832-0536-60</NDC11Code>
<ProductNDC>0832-0536</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214877</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories,LLC</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for oral suspension powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low-density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern.Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight.Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation:LDL-C = Total cholesterol - [(TG/5) + HDL-C] For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated.Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered.Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available, then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below.</IndicationAndUsage>
<Description>Cholestyramine for oral suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Nine grams of cholestyramine for oral suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Cholestyramine for oral suspension, USP powder contains the following inactive ingredients: acacia, anhydrous citric acid, D&C Yellow No. 10 Aluminum Lake, orange flavor (containing; modified food starch [with added corn syrup], maltodextrin, citric acid, silicon dioxide and natural tocopherols), propylene glycol alginate and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>10812-378-01</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (10812-378-01) > 118 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>10812-0378-01</NDC11Code>
<ProductNDC>10812-378</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neutrogena Ultra Gentle Soothing</ProprietaryName>
<ProprietaryNameSuffix>Spf15</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Octinoxate, And Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110501</StartMarketingDate>
<EndMarketingDate>20160921</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Neutrogena Corporation</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>30; 75; 20</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>11673-378-90</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (11673-378-90) </PackageDescription>
<NDC11Code>11673-0378-90</NDC11Code>
<ProductNDC>11673-378</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210527</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210527</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: 1 headache, 2 muscle pain, 3 toothache, 4 menstrual pain, 5 colds, 6 minor pain of arthritis, 7 temporarily reduces fever.</IndicationAndUsage>
</NDC>
</NDCList>