{
"NDC": [
{
"NDCCode": "10544-909-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (10544-909-10)",
"NDC11Code": "10544-0909-10",
"ProductNDC": "10544-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"NonProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091211",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ATOVAQUONE; PROGUANIL HYDROCHLORIDE",
"StrengthNumber": "250; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Atovaquone and proguanil hydrochloride tablets is an antimalarial indicated for: : 1 prophylaxis of Plasmodium falciparum malaria, including in areas where chloroquine resistance has been reported ( 1.1) , 2 treatment of acute, uncomplicated P. falciparum malaria ( 1.2) .",
"Description": "Atovaquone and proguanil hydrochloride tablets (Adult Strength), for oral administration.are a fixed-dose combination of the antimalarial agents atovaquone USP and proguanil hydrochloride USP. The chemical name of atovaquone USP is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone USP is a yellow crystalline solid that is freely soluble in N-methyl-2-pyrrolidone and in tetrahydrofuran; soluble in chloroform; sparingly soluble in acetone and dimethyl sulfoxide; slightly soluble in octanol, ethyl acetate, polyethylene glycol 200; very slightly soluble in 0.1N sodium hydroxide; insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline powder slightly soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride. It has a molecular weight of 290.22 and the molecular formula C 11H 16ClN 5HCl. The compound has the following structural formula:. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone USP and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 400, polyethylene glycol 8000, povidone K30, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "10544-909-05",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (10544-909-05)",
"NDC11Code": "10544-0909-05",
"ProductNDC": "10544-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"NonProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091211",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ATOVAQUONE; PROGUANIL HYDROCHLORIDE",
"StrengthNumber": "250; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Atovaquone and proguanil hydrochloride tablets is an antimalarial indicated for: : 1 prophylaxis of Plasmodium falciparum malaria, including in areas where chloroquine resistance has been reported ( 1.1) , 2 treatment of acute, uncomplicated P. falciparum malaria ( 1.2) .",
"Description": "Atovaquone and proguanil hydrochloride tablets (Adult Strength), for oral administration.are a fixed-dose combination of the antimalarial agents atovaquone USP and proguanil hydrochloride USP. The chemical name of atovaquone USP is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone USP is a yellow crystalline solid that is freely soluble in N-methyl-2-pyrrolidone and in tetrahydrofuran; soluble in chloroform; sparingly soluble in acetone and dimethyl sulfoxide; slightly soluble in octanol, ethyl acetate, polyethylene glycol 200; very slightly soluble in 0.1N sodium hydroxide; insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline powder slightly soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride. It has a molecular weight of 290.22 and the molecular formula C 11H 16ClN 5HCl. The compound has the following structural formula:. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone USP and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 400, polyethylene glycol 8000, povidone K30, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "19515-909-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (19515-909-52) > .5 mL in 1 SYRINGE (19515-909-41) ",
"NDC11Code": "19515-0909-52",
"ProductNDC": "19515-909",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Flulaval Quadrivalent",
"ProprietaryNameSuffix": "2018/2019",
"NonProprietaryName": "Influenza Virus Vaccine",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20180629",
"EndMarketingDate": "20190630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125163",
"LabelerName": "ID Biomedical Corporation of Quebec",
"SubstanceName": "INFLUENZA A VIRUS A/SINGAPORE/GP1908/2015 IVR-180 (H1N1) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/SINGAPORE/INFIMH-16-0019/2016 IVR-186 (H3N2) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (UV, FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "15; 15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2019-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180629",
"EndMarketingDatePackage": "20190630",
"SamplePackage": "N"
},
{
"NDCCode": "23155-909-41",
"PackageDescription": "10 AMPULE in 1 CARTON (23155-909-41) / 10 mL in 1 AMPULE",
"NDC11Code": "23155-0909-41",
"ProductNDC": "23155-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202436",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241125",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic acid injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.",
"Description": "Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is. Empirical Formula: C8H15NO2 Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueoussolution for injection has a pH of 6.5 to 8.0."
},
{
"NDCCode": "31722-909-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (31722-909-10)",
"NDC11Code": "31722-0909-10",
"ProductNDC": "31722-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole",
"NonProprietaryName": "Pramipexole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203855",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2016-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150801",
"SamplePackage": "N",
"IndicationAndUsage": "PRAMIPEXOLE DIHYDROCHLORIDE tablets is a non-ergot dopamine agonist indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S2HClH2O, and its molecular weight is 302.27. The structural formula is:. Pramipexole dihydrochloride is a white to almost white crystalline powder. Melting occurs in the range of 296˚C to 301˚C, with decomposition. Pramipexole Dihydrochloride is freely soluble in water, soluble in methanol, sparingly soluble to slightly soluble in ethanol (96%) and practically insoluble in methylene chloride.Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride, USP. Inactive ingredients consist of mannitol, corn starch, colloidal silicon dioxide, povidone, and magnesium stearate."
},
{
"NDCCode": "51414-909-10",
"PackageDescription": "5.5 g in 1 PACKAGE (51414-909-10) ",
"NDC11Code": "51414-0909-10",
"ProductNDC": "51414-909",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pain Relieving Burn Gel",
"NonProprietaryName": "Burn Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part346",
"LabelerName": "Yuyao Jessie Commodity Co.,Ltd.",
"SubstanceName": "LIDOCAINE",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-02-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190104",
"SamplePackage": "N",
"IndicationAndUsage": "temporary relief from minor aches and pains of sore muscles &joints associated with arthritis ,backache,strains,sprains."
},
{
"NDCCode": "51414-909-14",
"PackageDescription": "10 g in 1 BOTTLE (51414-909-14) ",
"NDC11Code": "51414-0909-14",
"ProductNDC": "51414-909",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pain Relieving Burn Gel",
"NonProprietaryName": "Burn Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part346",
"LabelerName": "Yuyao Jessie Commodity Co.,Ltd.",
"SubstanceName": "LIDOCAINE",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-02-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190104",
"SamplePackage": "N",
"IndicationAndUsage": "temporary relief from minor aches and pains of sore muscles &joints associated with arthritis ,backache,strains,sprains."
},
{
"NDCCode": "54575-909-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-909-10)",
"NDC11Code": "54575-0909-10",
"ProductNDC": "54575-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bayberry Pollen",
"NonProprietaryName": "Morella Cerifera Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "MORELLA CERIFERA POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55289-909-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-909-10)",
"NDC11Code": "55289-0909-10",
"ProductNDC": "55289-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20060531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065266",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-08-06",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "58160-909-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-909-52) / .5 mL in 1 SYRINGE (58160-909-41) ",
"NDC11Code": "58160-0909-52",
"ProductNDC": "58160-909",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Fluarix Quadrivalent",
"ProprietaryNameSuffix": "2023/2024",
"NonProprietaryName": "Influenza Virus Vaccine",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20230630",
"EndMarketingDate": "20240630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125127",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "INFLUENZA A VIRUS A/DARWIN/6/2021 IVR-227 (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "15; 15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230630",
"EndMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "FLUARIX QUADRIVALENT is indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B viruses contained in the vaccine [see Description (11)]. FLUARIX QUADRIVALENT is approved for use in persons aged 6 months and older.",
"Description": "FLUARIX QUADRIVALENT, Influenza Vaccine, for intramuscular injection, is a sterile, colorless, and slightly opalescent suspension. FLUARIX QUADRIVALENT is prepared from influenza viruses propagated in embryonated chicken eggs. Each of the influenza viruses is produced and purified separately. After harvesting the virus-containing fluids, each influenza virus is concentrated and purified by zonal centrifugation using a linear sucrose density gradient solution containing detergent to disrupt the viruses. Following dilution, the vaccine is further purified by diafiltration. Each influenza virus solution is inactivated by the consecutive effects of sodium deoxycholate and formaldehyde leading to the production of a “split virus.” Each split inactivated virus is then suspended in sodium phosphate-buffered isotonic sodium chloride solution. Each vaccine is formulated from the split inactivated virus solutions. FLUARIX QUADRIVALENT has been standardized according to U.S. Public Health Service (USPHS) requirements for the 2023-2024 influenza season and is formulated to contain 60 micrograms (mcg) hemagglutinin (HA) per 0.5‑mL dose, in the recommended ratio of 15 mcg HA of each of the following 4 influenza virus strains (2 A strains and 2 B strains): A/Victoria/4897/2022 (H1N1) IVR-238, A/Darwin/6/2021 (H3N2) IVR-227 (an A/Darwin/9/2021 (H3N2)-like virus), B/Austria/1359417/2021 BVR-26 (B-Victoria lineage), and B/Phuket/3073/2013 (B-Yamagata lineage). FLUARIX QUADRIVALENT is formulated without preservatives. FLUARIX QUADRIVALENT does not contain thimerosal. Each 0.5‑mL dose also contains octoxynol-10 (TRITON X-100) ≤0.115 mg, α-tocopheryl hydrogen succinate ≤0.135 mg, and polysorbate 80 (Tween 80) ≤0.550 mg. Each dose may also contain residual amounts of hydrocortisone ≤0.0015 mcg, gentamicin sulfate ≤0.15 mcg, ovalbumin ≤0.050 mcg, formaldehyde ≤5 mcg, and sodium deoxycholate ≤65 mcg from the manufacturing process. The tip caps and plungers of the prefilled syringes of FLUARIX QUADRIVALENT are not made with natural rubber latex."
},
{
"NDCCode": "60592-909-10",
"PackageDescription": "1000 g in 1 BOTTLE (60592-909-10)",
"NDC11Code": "60592-0909-10",
"ProductNDC": "60592-909",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Phenylbutazone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190821",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Kalchem International Inc.",
"SubstanceName": "PHENYLBUTAZONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "66651-909-14",
"PackageDescription": "10 kg in 1 DRUM (66651-909-14) ",
"NDC11Code": "66651-0909-14",
"ProductNDC": "66651-909",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150123",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "HIKAL LIMITED",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-02-23",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "23-JAN-15"
},
{
"NDCCode": "70954-909-10",
"PackageDescription": "36 TABLET in 1 BOTTLE (70954-909-10) ",
"NDC11Code": "70954-0909-10",
"ProductNDC": "70954-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lofexidine",
"NonProprietaryName": "Lofexidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219917",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "LOFEXIDINE HYDROCHLORIDE",
"StrengthNumber": ".18",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251022",
"SamplePackage": "N",
"IndicationAndUsage": "Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.",
"Description": "Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, convex-shaped, peach colored, film-coated tablets, debossed with “909” on one side and “N” on other side, free from physical defects for oral administration. Each tablet contains 0.18 mg lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: lactose, citric acid, povidone, microcrystalline cellulose, calcium stearate, sodium lauryl sulphate, hydroxypropyl cellulose, titanium dioxide, propylene glycol, FD&C yellow No. 6 and FD&C blue No. 2."
},
{
"NDCCode": "71288-909-10",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (71288-909-10) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "71288-0909-10",
"ProductNDC": "71288-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Diluting Medium For Garzulys",
"NonProprietaryName": "Water Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20260724",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761497",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260724",
"SamplePackage": "N",
"IndicationAndUsage": "Garzulys is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart-fsan is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Escherichia coli. Insulin aspart-fsan has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. Figure 1. Structural formula of insulin aspart-fsan. Garzulys (insulin aspart-fsan) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart-fsan and the inactive ingredients: dibasic sodium phosphate (0.997 mg), glycerin (16 mg), metacresol (1.72 mg), phenol (1.5 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. Garzulys has a pH of 7.2-7.6. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "75945-909-10",
"PackageDescription": "10 kg in 1 DRUM (75945-909-10) ",
"NDC11Code": "75945-0909-10",
"ProductNDC": "75945-909",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260801",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Lee Pharma Ltd.",
"SubstanceName": "DIFLUORO ATORVASTATIN CALCIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-08-17",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-AUG-26"
},
{
"NDCCode": "10544-008-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-008-10)",
"NDC11Code": "10544-0008-10",
"ProductNDC": "10544-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090118",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2014-11-21"
},
{
"NDCCode": "10544-020-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (10544-020-10)",
"NDC11Code": "10544-0020-10",
"ProductNDC": "10544-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062702",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note—Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules, cephalexin for oral suspension, cephalexin tablets, and other antibacterial drugs, cephalexin capsules, cephalexin for oral suspension, and cephalexin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin has the following structural formula. C16H17N3O4SH2O M.W. 365.41. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "10544-025-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (10544-025-10)",
"NDC11Code": "10544-0025-10",
"ProductNDC": "10544-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20101105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065152",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin Capsule, USP is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms:. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes. (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli. Proteus mirabilis, and Klebsiella pneumoniae. Note — Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cephalexin Capsules, USP and other antibacterial drugs, Cephalexin Capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin Capsule, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each 250-mg capsule contains cephalexin monohydrate equivalent to 250 mg of cephalexin and each 500-mg capsule contains cephalexin monohydrate equivalent to 500 mg of cephalexin. The inactive ingredients: magnesium stearate, sodium starch glycolate, lactose monohydrate, talc, colloidal silicone dioxide. The capsule shells contain gelatin, titanium dioxide, FD&C Blue No. 1, FD&C Yellow No. 5. The imprinting ink components on 250 mg and 500 mg capsules: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide."
},
{
"NDCCode": "10544-051-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-051-10)",
"NDC11Code": "10544-0051-10",
"ProductNDC": "10544-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040712",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Promethazine hydrochloride tablets, USP are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of. anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Each 12.5 mg promethazine hydrochloride tablet for oral administration contains 12.5 mg promethazine hydrochloride. Each 25 mg promethazine hydrochloride tablet for oral administration contains 25 mg promethazine hydrochloride. Each 50 mg promethazine hydrochloride tablet for oral administration contains 50 mg promethazine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, and methylcellulose. In addition, 50 mg tablet contains FD&C Red #40 and 12.5 mg tablet contains FD&C Yellow #6. Promethazine hydrochloride is a racemic compound; the empirical formula is. C 17H 20N 2SHCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as. 10 H-Phenothiazine-10-ethanamine, N,N,_-trimethyl-, monohydrochloride, (±)- with the following structural formula:. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol."
},
{
"NDCCode": "10544-055-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-055-10)",
"NDC11Code": "10544-0055-10",
"ProductNDC": "10544-055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hcl",
"NonProprietaryName": "Phenazopyridine Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110914",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: Corn Starch, Croscarmellose Sodium, Hypromellose, Light Mineral Oil, Magnesium Stearate, Microcrystalline Cellulose, Povidone, Pregelatinized Starch, and Silicon Dioxide."
},
{
"NDCCode": "10544-062-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-062-10)",
"NDC11Code": "10544-0062-10",
"ProductNDC": "10544-062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Medroxyprogesterone Acetate",
"NonProprietaryName": "Medroxyprogesterone Acetate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040159",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "MEDROXYPROGESTERONE ACETATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Progesterone Congeners [CS],Progestin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Medroxyprogesterone Acetate Tablets USP are a progestin indicated for the treatment of secondary amenorrhea and abnormal uterine bleeding due to hormonal imbalance in the absence of organic pathology, such as fibroids or uterine cancer. Medroxyprogesterone Acetate Tablets USP are also indicated to reduce the incidence of endometrial hyperplasia in nonhysterectomized postmenopausal women receiving daily oral conjugated estrogens 0.625 mg tablets.",
"Description": "Medroxyprogesterone Acetate Tablets USP contain medroxyprogesterone acetate, USP which is a derivative of progesterone. It is a white to off-white, odorless crystalline powder, stable in air, melting between 200 and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. The structural formula is. Each tablet, for oral administration, contains 2.5 mg, 5 mg or 10 mg of medroxyprogesterone acetate, USP. In addition, each tablet contains the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, methylcellulose, pregelatinized starch, and sodium lauryl sulfate."
},
{
"NDCCode": "10544-072-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (10544-072-10)",
"NDC11Code": "10544-0072-10",
"ProductNDC": "10544-072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "10544-079-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-079-10)",
"NDC11Code": "10544-0079-10",
"ProductNDC": "10544-079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076639",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ciprofloxacin Tablets USP, 250 mg, 500 mg and 750 mg is indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATION for specific recommendations.",
"Description": "Ciprofloxacin Hydrochloride Tablets USP, 250 mg, 500 mg and 750 mg are synthetic broad spectrum antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3HClH2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin Tablets USP are film-coated tablets and are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin Tablets are white to slightly yellowish. The inactive ingredients are pregelatinized starch, microcrystalline cellulose, colloidal silicon dioxide, crospovidone, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and purified water."
},
{
"NDCCode": "10544-082-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (10544-082-10)",
"NDC11Code": "10544-0082-10",
"ProductNDC": "10544-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062713",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin capsules are indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, cephalexin capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain anhydrous lactose, gelatin, magnesium stearate, talc and titanium dioxide. The capsules are imprinted with edible ink containing black iron oxide."
},
{
"NDCCode": "10544-091-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (10544-091-10)",
"NDC11Code": "10544-0091-10",
"ProductNDC": "10544-091",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040804",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "HydrOXYzine hydrochloride has the chemical name of 2-[2-[4- (p-Chloro-α-phenylbenzyl)-1-piperazinyl] ethoxy] ethanol dihydrochloride. HydrOXYzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine HCl. Inactive ingredients include: lactose monohydrate, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, stearic acid, polyethylene glycol, polysorbate 80, and titanium dioxide."
},
{
"NDCCode": "10544-100-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-100-10)",
"NDC11Code": "10544-0100-10",
"ProductNDC": "10544-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089805",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the relief of mild to moderately severe pain.",
"Description": "Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each 300 mg/30 mg Acetaminophen and Codeine Phosphate Tablet contains: Acetaminophen ......................................................................................................300 mg Codeine Phosphate ..................................................................................................30 mg. In addition each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, pregelatinized corn starch, sodium metabisulfite, sodium starch glycolate and stearic acid."
},
{
"NDCCode": "10544-115-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (10544-115-10)",
"NDC11Code": "10544-0115-10",
"ProductNDC": "10544-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100520",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).",
"Description": "Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch."
},
{
"NDCCode": "10544-125-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (10544-125-10)",
"NDC11Code": "10544-0125-10",
"ProductNDC": "10544-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087342",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisone tablets and solutions are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone.............................................................1 mg, 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. Each 5 mL of oral solution for oral administration contains. Prednisone............................................................................................................................... 5 mg. Alcohol.................................................................................................................................... 5%. Each mL of Intensol for oral administration contains:. Prednisone............................................................................................................................... 5 mg. Alcohol.................................................................................................................................... 30%."
},
{
"NDCCode": "10544-143-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (10544-143-10)",
"NDC11Code": "10544-0143-10",
"ProductNDC": "10544-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets, USP and other antibacterial drugs, levofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets, USP are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible isolates of the designated microorganisms in the conditions listed in this section. Culture and susceptibility testingAppropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin tablets, USP [see Microbiology(12.4)] . Therapy with levofloxacin tablets, USP may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin tablets, USP. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.",
"Description": ". Levofloxacin USP is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin USP. The empirical formula is C 18H 20FN 3O 4½ H 2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Excipients and Description of Dosage FormsLevofloxacin Tablets, USP. Levofloxacin Tablets, USP are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide., 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides., 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "10544-147-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10544-147-10)",
"NDC11Code": "10544-0147-10",
"ProductNDC": "10544-147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076794",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ciprofloxacin tablets, USP are indicated for the treatment of infections caused by susceptible isolates of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATIONfor specific recommendations. Adult Patients. Urinary Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Serratia marcescens, Proteus mirabilis, Providencia rettgeri, Morganella morganii, Citrobacter koseri (diversus), Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus epidermidis, Staphylococcus saprophyticus, or vancomycin-susceptible Enterococcus faecalis. Acute Uncomplicated Cystitis in Females caused by Escherichia coli or Staphylococcus saprophyticus. Chronic Bacterial Prostatitis caused by Escherichia coli or Proteus mirabilis. Lower Respiratory Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Pseudomonas aeruginosa, Haemophilus influenzae, Haemophilus parainfluenzae, or penicillin-susceptible Streptococcus pneumoniae.* Also, Moraxella catarrhalis for the treatment of acute exacerbations of chronic bronchitis. *Ciprofloxacin is not a drug of first choice in the treatment of presumed or confirmed pneumonia secondary to Streptococcus pneumoniae. Acute Sinusitis caused by Haemophilus influenzae, penicillin-susceptible Streptococcus pneumoniae, or Moraxella catarrhalis. Skin and Skin Structure Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Proteus vulgaris, Providencia stuartii, Morganella morganii, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus aureus, methicillin-susceptible Staphylococcus epidermidis, or Streptococcus pyogenes. Bone and Joint Infections caused by Enterobacter cloacae, Serratia marcescens, or Pseudomonas aeruginosa. Complicated Intra-Abdominal Infections (used in combination with metronidazole) caused by Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis, Klebsiella pneumoniae, or Bacteroides fragilis. Infectious Diarrhea caused by Escherichia coli (enterotoxigenic isolates), Campylobacter jejuni, Shigella boydii†, Shigella dysenteriae, Shigella flexneri or Shigella sonnei†when antibacterial therapy is indicated. †Although treatment of infections due to this organism in this organ system demonstrated a clinically significant outcome, efficacy was studied in fewer than 10 patients. Typhoid Fever (Enteric Fever) caused by Salmonella typhi. NOTE: The efficacy of ciprofloxacin in the eradication of the chronic typhoid carrier state has not been demonstrated. Uncomplicated Cervical and Urethral Gonorrhea due to Neisseria gonorrhoeae. Pediatric Patients (1 to 17 years of age). Complicated Urinary Tract Infections and Pyelonephritis due to Escherichia coli. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the pediatric population due to an increased incidence of adverse events compared to controls, including events related to joints and/or surrounding tissues. (See WARNINGS, PRECAUTIONS, Pediatric Use, ADVERSE REACTIONSandCLINICAL STUDIES.) Ciprofloxacin, like other fluoroquinolones, is associated with arthropathy and histopathological changes in weight-bearing joints of juvenile animals. (See ANIMAL PHARMACOLOGY.). Adult and Pediatric Patients. Inhalational Anthrax (post-exposure): To reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. Ciprofloxacin serum concentrations achieved in humans served as a surrogate endpoint reasonably likely to predict clinical benefit and provided the initial basis for approval of this indication.5 Supportive clinical information for ciprofloxacin for anthrax post-exposure prophylaxis was obtained during the anthrax bioterror attacks of October 2001. (See also, INHALATIONAL ANTHRAX - ADDITIONAL INFORMATION). If anaerobic organisms are suspected of contributing to the infection, appropriate therapy should be administered. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to ciprofloxacin. Therapy with ciprofloxacin tablets, USP may be initiated before results of these tests are known; once results become available appropriate therapy should be continued. As with other drugs, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with ciprofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information not only on the therapeutic effect of the antimicrobial agent but also on the possible emergence of bacterial resistance. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ciprofloxacin tablets, USP and other antibacterial drugs, ciprofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ciprofloxacin tablets, USP is a synthetic broad spectrum antimicrobial agent for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C17H18FN3O3●ŸŸHClŸ●H2O and its chemical structure is as follows. Ciprofloxacin, USP is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are cornstarch, microcrystalline cellulose, silicon dioxide, crospovidone, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol and purified water."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>10544-909-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (10544-909-10)</PackageDescription>
<NDC11Code>10544-0909-10</NDC11Code>
<ProductNDC>10544-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atovaquone And Proguanil Hydrochloride</ProprietaryName>
<NonProprietaryName>Atovaquone And Proguanil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091211</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ATOVAQUONE; PROGUANIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atovaquone and proguanil hydrochloride tablets is an antimalarial indicated for: : 1 prophylaxis of Plasmodium falciparum malaria, including in areas where chloroquine resistance has been reported ( 1.1) , 2 treatment of acute, uncomplicated P. falciparum malaria ( 1.2) .</IndicationAndUsage>
<Description>Atovaquone and proguanil hydrochloride tablets (Adult Strength), for oral administration.are a fixed-dose combination of the antimalarial agents atovaquone USP and proguanil hydrochloride USP. The chemical name of atovaquone USP is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone USP is a yellow crystalline solid that is freely soluble in N-methyl-2-pyrrolidone and in tetrahydrofuran; soluble in chloroform; sparingly soluble in acetone and dimethyl sulfoxide; slightly soluble in octanol, ethyl acetate, polyethylene glycol 200; very slightly soluble in 0.1N sodium hydroxide; insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline powder slightly soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride. It has a molecular weight of 290.22 and the molecular formula C 11H 16ClN 5HCl. The compound has the following structural formula:. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone USP and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 400, polyethylene glycol 8000, povidone K30, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-909-05</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (10544-909-05)</PackageDescription>
<NDC11Code>10544-0909-05</NDC11Code>
<ProductNDC>10544-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atovaquone And Proguanil Hydrochloride</ProprietaryName>
<NonProprietaryName>Atovaquone And Proguanil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091211</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ATOVAQUONE; PROGUANIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atovaquone and proguanil hydrochloride tablets is an antimalarial indicated for: : 1 prophylaxis of Plasmodium falciparum malaria, including in areas where chloroquine resistance has been reported ( 1.1) , 2 treatment of acute, uncomplicated P. falciparum malaria ( 1.2) .</IndicationAndUsage>
<Description>Atovaquone and proguanil hydrochloride tablets (Adult Strength), for oral administration.are a fixed-dose combination of the antimalarial agents atovaquone USP and proguanil hydrochloride USP. The chemical name of atovaquone USP is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone USP is a yellow crystalline solid that is freely soluble in N-methyl-2-pyrrolidone and in tetrahydrofuran; soluble in chloroform; sparingly soluble in acetone and dimethyl sulfoxide; slightly soluble in octanol, ethyl acetate, polyethylene glycol 200; very slightly soluble in 0.1N sodium hydroxide; insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline powder slightly soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride. It has a molecular weight of 290.22 and the molecular formula C 11H 16ClN 5HCl. The compound has the following structural formula:. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone USP and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 400, polyethylene glycol 8000, povidone K30, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>19515-909-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (19515-909-52) > .5 mL in 1 SYRINGE (19515-909-41) </PackageDescription>
<NDC11Code>19515-0909-52</NDC11Code>
<ProductNDC>19515-909</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Flulaval Quadrivalent</ProprietaryName>
<ProprietaryNameSuffix>2018/2019</ProprietaryNameSuffix>
<NonProprietaryName>Influenza Virus Vaccine</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20180629</StartMarketingDate>
<EndMarketingDate>20190630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125163</ApplicationNumber>
<LabelerName>ID Biomedical Corporation of Quebec</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/SINGAPORE/GP1908/2015 IVR-180 (H1N1) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/SINGAPORE/INFIMH-16-0019/2016 IVR-186 (H3N2) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (UV, FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180629</StartMarketingDatePackage>
<EndMarketingDatePackage>20190630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>23155-909-41</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (23155-909-41) / 10 mL in 1 AMPULE</PackageDescription>
<NDC11Code>23155-0909-41</NDC11Code>
<ProductNDC>23155-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202436</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic acid injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is. Empirical Formula: C8H15NO2 Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueoussolution for injection has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>31722-909-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (31722-909-10)</PackageDescription>
<NDC11Code>31722-0909-10</NDC11Code>
<ProductNDC>31722-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole</ProprietaryName>
<NonProprietaryName>Pramipexole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203855</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2016-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRAMIPEXOLE DIHYDROCHLORIDE tablets is a non-ergot dopamine agonist indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S2HClH2O, and its molecular weight is 302.27. The structural formula is:. Pramipexole dihydrochloride is a white to almost white crystalline powder. Melting occurs in the range of 296˚C to 301˚C, with decomposition. Pramipexole Dihydrochloride is freely soluble in water, soluble in methanol, sparingly soluble to slightly soluble in ethanol (96%) and practically insoluble in methylene chloride.Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride, USP. Inactive ingredients consist of mannitol, corn starch, colloidal silicon dioxide, povidone, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>51414-909-10</NDCCode>
<PackageDescription>5.5 g in 1 PACKAGE (51414-909-10) </PackageDescription>
<NDC11Code>51414-0909-10</NDC11Code>
<ProductNDC>51414-909</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pain Relieving Burn Gel</ProprietaryName>
<NonProprietaryName>Burn Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part346</ApplicationNumber>
<LabelerName>Yuyao Jessie Commodity Co.,Ltd.</LabelerName>
<SubstanceName>LIDOCAINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporary relief from minor aches and pains of sore muscles &joints associated with arthritis ,backache,strains,sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51414-909-14</NDCCode>
<PackageDescription>10 g in 1 BOTTLE (51414-909-14) </PackageDescription>
<NDC11Code>51414-0909-14</NDC11Code>
<ProductNDC>51414-909</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pain Relieving Burn Gel</ProprietaryName>
<NonProprietaryName>Burn Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part346</ApplicationNumber>
<LabelerName>Yuyao Jessie Commodity Co.,Ltd.</LabelerName>
<SubstanceName>LIDOCAINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporary relief from minor aches and pains of sore muscles &joints associated with arthritis ,backache,strains,sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54575-909-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-909-10)</PackageDescription>
<NDC11Code>54575-0909-10</NDC11Code>
<ProductNDC>54575-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bayberry Pollen</ProprietaryName>
<NonProprietaryName>Morella Cerifera Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>MORELLA CERIFERA POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55289-909-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-909-10)</PackageDescription>
<NDC11Code>55289-0909-10</NDC11Code>
<ProductNDC>55289-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065266</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-08-06</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>58160-909-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-909-52) / .5 mL in 1 SYRINGE (58160-909-41) </PackageDescription>
<NDC11Code>58160-0909-52</NDC11Code>
<ProductNDC>58160-909</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Fluarix Quadrivalent</ProprietaryName>
<ProprietaryNameSuffix>2023/2024</ProprietaryNameSuffix>
<NonProprietaryName>Influenza Virus Vaccine</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<EndMarketingDate>20240630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125127</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/DARWIN/6/2021 IVR-227 (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<EndMarketingDatePackage>20240630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FLUARIX QUADRIVALENT is indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B viruses contained in the vaccine [see Description (11)]. FLUARIX QUADRIVALENT is approved for use in persons aged 6 months and older.</IndicationAndUsage>
<Description>FLUARIX QUADRIVALENT, Influenza Vaccine, for intramuscular injection, is a sterile, colorless, and slightly opalescent suspension. FLUARIX QUADRIVALENT is prepared from influenza viruses propagated in embryonated chicken eggs. Each of the influenza viruses is produced and purified separately. After harvesting the virus-containing fluids, each influenza virus is concentrated and purified by zonal centrifugation using a linear sucrose density gradient solution containing detergent to disrupt the viruses. Following dilution, the vaccine is further purified by diafiltration. Each influenza virus solution is inactivated by the consecutive effects of sodium deoxycholate and formaldehyde leading to the production of a “split virus.” Each split inactivated virus is then suspended in sodium phosphate-buffered isotonic sodium chloride solution. Each vaccine is formulated from the split inactivated virus solutions. FLUARIX QUADRIVALENT has been standardized according to U.S. Public Health Service (USPHS) requirements for the 2023-2024 influenza season and is formulated to contain 60 micrograms (mcg) hemagglutinin (HA) per 0.5‑mL dose, in the recommended ratio of 15 mcg HA of each of the following 4 influenza virus strains (2 A strains and 2 B strains): A/Victoria/4897/2022 (H1N1) IVR-238, A/Darwin/6/2021 (H3N2) IVR-227 (an A/Darwin/9/2021 (H3N2)-like virus), B/Austria/1359417/2021 BVR-26 (B-Victoria lineage), and B/Phuket/3073/2013 (B-Yamagata lineage). FLUARIX QUADRIVALENT is formulated without preservatives. FLUARIX QUADRIVALENT does not contain thimerosal. Each 0.5‑mL dose also contains octoxynol-10 (TRITON X-100) ≤0.115 mg, α-tocopheryl hydrogen succinate ≤0.135 mg, and polysorbate 80 (Tween 80) ≤0.550 mg. Each dose may also contain residual amounts of hydrocortisone ≤0.0015 mcg, gentamicin sulfate ≤0.15 mcg, ovalbumin ≤0.050 mcg, formaldehyde ≤5 mcg, and sodium deoxycholate ≤65 mcg from the manufacturing process. The tip caps and plungers of the prefilled syringes of FLUARIX QUADRIVALENT are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>60592-909-10</NDCCode>
<PackageDescription>1000 g in 1 BOTTLE (60592-909-10)</PackageDescription>
<NDC11Code>60592-0909-10</NDC11Code>
<ProductNDC>60592-909</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Phenylbutazone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190821</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Kalchem International Inc.</LabelerName>
<SubstanceName>PHENYLBUTAZONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66651-909-14</NDCCode>
<PackageDescription>10 kg in 1 DRUM (66651-909-14) </PackageDescription>
<NDC11Code>66651-0909-14</NDC11Code>
<ProductNDC>66651-909</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150123</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>HIKAL LIMITED</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-02-23</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>23-JAN-15</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70954-909-10</NDCCode>
<PackageDescription>36 TABLET in 1 BOTTLE (70954-909-10) </PackageDescription>
<NDC11Code>70954-0909-10</NDC11Code>
<ProductNDC>70954-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lofexidine</ProprietaryName>
<NonProprietaryName>Lofexidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219917</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LOFEXIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.18</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.</IndicationAndUsage>
<Description>Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, convex-shaped, peach colored, film-coated tablets, debossed with “909” on one side and “N” on other side, free from physical defects for oral administration. Each tablet contains 0.18 mg lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: lactose, citric acid, povidone, microcrystalline cellulose, calcium stearate, sodium lauryl sulphate, hydroxypropyl cellulose, titanium dioxide, propylene glycol, FD&C yellow No. 6 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>71288-909-10</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (71288-909-10) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>71288-0909-10</NDC11Code>
<ProductNDC>71288-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Diluting Medium For Garzulys</ProprietaryName>
<NonProprietaryName>Water Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260724</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761497</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Garzulys is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart-fsan is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Escherichia coli. Insulin aspart-fsan has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. Figure 1. Structural formula of insulin aspart-fsan. Garzulys (insulin aspart-fsan) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart-fsan and the inactive ingredients: dibasic sodium phosphate (0.997 mg), glycerin (16 mg), metacresol (1.72 mg), phenol (1.5 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. Garzulys has a pH of 7.2-7.6. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>75945-909-10</NDCCode>
<PackageDescription>10 kg in 1 DRUM (75945-909-10) </PackageDescription>
<NDC11Code>75945-0909-10</NDC11Code>
<ProductNDC>75945-909</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260801</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Lee Pharma Ltd.</LabelerName>
<SubstanceName>DIFLUORO ATORVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-17</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-AUG-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10544-008-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-008-10)</PackageDescription>
<NDC11Code>10544-0008-10</NDC11Code>
<ProductNDC>10544-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090118</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-11-21</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-020-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (10544-020-10)</PackageDescription>
<NDC11Code>10544-0020-10</NDC11Code>
<ProductNDC>10544-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062702</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note—Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules, cephalexin for oral suspension, cephalexin tablets, and other antibacterial drugs, cephalexin capsules, cephalexin for oral suspension, and cephalexin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin has the following structural formula. C16H17N3O4SH2O M.W. 365.41. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-025-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (10544-025-10)</PackageDescription>
<NDC11Code>10544-0025-10</NDC11Code>
<ProductNDC>10544-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065152</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin Capsule, USP is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms:. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes. (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli. Proteus mirabilis, and Klebsiella pneumoniae. Note — Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cephalexin Capsules, USP and other antibacterial drugs, Cephalexin Capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin Capsule, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each 250-mg capsule contains cephalexin monohydrate equivalent to 250 mg of cephalexin and each 500-mg capsule contains cephalexin monohydrate equivalent to 500 mg of cephalexin. The inactive ingredients: magnesium stearate, sodium starch glycolate, lactose monohydrate, talc, colloidal silicone dioxide. The capsule shells contain gelatin, titanium dioxide, FD&C Blue No. 1, FD&C Yellow No. 5. The imprinting ink components on 250 mg and 500 mg capsules: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-051-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-051-10)</PackageDescription>
<NDC11Code>10544-0051-10</NDC11Code>
<ProductNDC>10544-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040712</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Promethazine hydrochloride tablets, USP are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of. anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Each 12.5 mg promethazine hydrochloride tablet for oral administration contains 12.5 mg promethazine hydrochloride. Each 25 mg promethazine hydrochloride tablet for oral administration contains 25 mg promethazine hydrochloride. Each 50 mg promethazine hydrochloride tablet for oral administration contains 50 mg promethazine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, and methylcellulose. In addition, 50 mg tablet contains FD&C Red #40 and 12.5 mg tablet contains FD&C Yellow #6. Promethazine hydrochloride is a racemic compound; the empirical formula is. C 17H 20N 2SHCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as. 10 H-Phenothiazine-10-ethanamine, N,N,_-trimethyl-, monohydrochloride, (±)- with the following structural formula:. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>10544-055-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-055-10)</PackageDescription>
<NDC11Code>10544-0055-10</NDC11Code>
<ProductNDC>10544-055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hcl</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110914</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: Corn Starch, Croscarmellose Sodium, Hypromellose, Light Mineral Oil, Magnesium Stearate, Microcrystalline Cellulose, Povidone, Pregelatinized Starch, and Silicon Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-062-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-062-10)</PackageDescription>
<NDC11Code>10544-0062-10</NDC11Code>
<ProductNDC>10544-062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
<NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040159</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Progesterone Congeners [CS],Progestin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Medroxyprogesterone Acetate Tablets USP are a progestin indicated for the treatment of secondary amenorrhea and abnormal uterine bleeding due to hormonal imbalance in the absence of organic pathology, such as fibroids or uterine cancer. Medroxyprogesterone Acetate Tablets USP are also indicated to reduce the incidence of endometrial hyperplasia in nonhysterectomized postmenopausal women receiving daily oral conjugated estrogens 0.625 mg tablets.</IndicationAndUsage>
<Description>Medroxyprogesterone Acetate Tablets USP contain medroxyprogesterone acetate, USP which is a derivative of progesterone. It is a white to off-white, odorless crystalline powder, stable in air, melting between 200 and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. The structural formula is. Each tablet, for oral administration, contains 2.5 mg, 5 mg or 10 mg of medroxyprogesterone acetate, USP. In addition, each tablet contains the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, methylcellulose, pregelatinized starch, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>10544-072-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (10544-072-10)</PackageDescription>
<NDC11Code>10544-0072-10</NDC11Code>
<ProductNDC>10544-072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-079-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-079-10)</PackageDescription>
<NDC11Code>10544-0079-10</NDC11Code>
<ProductNDC>10544-079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076639</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ciprofloxacin Tablets USP, 250 mg, 500 mg and 750 mg is indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATION for specific recommendations.</IndicationAndUsage>
<Description>Ciprofloxacin Hydrochloride Tablets USP, 250 mg, 500 mg and 750 mg are synthetic broad spectrum antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3HClH2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin Tablets USP are film-coated tablets and are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin Tablets are white to slightly yellowish. The inactive ingredients are pregelatinized starch, microcrystalline cellulose, colloidal silicon dioxide, crospovidone, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>10544-082-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (10544-082-10)</PackageDescription>
<NDC11Code>10544-0082-10</NDC11Code>
<ProductNDC>10544-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062713</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin capsules are indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, cephalexin capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain anhydrous lactose, gelatin, magnesium stearate, talc and titanium dioxide. The capsules are imprinted with edible ink containing black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-091-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (10544-091-10)</PackageDescription>
<NDC11Code>10544-0091-10</NDC11Code>
<ProductNDC>10544-091</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040804</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>HydrOXYzine hydrochloride has the chemical name of 2-[2-[4- (p-Chloro-α-phenylbenzyl)-1-piperazinyl] ethoxy] ethanol dihydrochloride. HydrOXYzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine HCl. Inactive ingredients include: lactose monohydrate, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, stearic acid, polyethylene glycol, polysorbate 80, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-100-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-100-10)</PackageDescription>
<NDC11Code>10544-0100-10</NDC11Code>
<ProductNDC>10544-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089805</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the relief of mild to moderately severe pain.</IndicationAndUsage>
<Description>Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each 300 mg/30 mg Acetaminophen and Codeine Phosphate Tablet contains: Acetaminophen ......................................................................................................300 mg Codeine Phosphate ..................................................................................................30 mg. In addition each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, pregelatinized corn starch, sodium metabisulfite, sodium starch glycolate and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>10544-115-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (10544-115-10)</PackageDescription>
<NDC11Code>10544-0115-10</NDC11Code>
<ProductNDC>10544-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100520</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>10544-125-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (10544-125-10)</PackageDescription>
<NDC11Code>10544-0125-10</NDC11Code>
<ProductNDC>10544-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087342</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisone tablets and solutions are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone.............................................................1 mg, 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. Each 5 mL of oral solution for oral administration contains. Prednisone............................................................................................................................... 5 mg. Alcohol.................................................................................................................................... 5%. Each mL of Intensol for oral administration contains:. Prednisone............................................................................................................................... 5 mg. Alcohol.................................................................................................................................... 30%.</Description>
</NDC>
<NDC>
<NDCCode>10544-143-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (10544-143-10)</PackageDescription>
<NDC11Code>10544-0143-10</NDC11Code>
<ProductNDC>10544-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets, USP and other antibacterial drugs, levofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets, USP are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible isolates of the designated microorganisms in the conditions listed in this section. Culture and susceptibility testingAppropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin tablets, USP [see Microbiology(12.4)] . Therapy with levofloxacin tablets, USP may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin tablets, USP. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.</IndicationAndUsage>
<Description>. Levofloxacin USP is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin USP. The empirical formula is C 18H 20FN 3O 4½ H 2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Excipients and Description of Dosage FormsLevofloxacin Tablets, USP. Levofloxacin Tablets, USP are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide., 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides., 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>10544-147-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10544-147-10)</PackageDescription>
<NDC11Code>10544-0147-10</NDC11Code>
<ProductNDC>10544-147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076794</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ciprofloxacin tablets, USP are indicated for the treatment of infections caused by susceptible isolates of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATIONfor specific recommendations. Adult Patients. Urinary Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Serratia marcescens, Proteus mirabilis, Providencia rettgeri, Morganella morganii, Citrobacter koseri (diversus), Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus epidermidis, Staphylococcus saprophyticus, or vancomycin-susceptible Enterococcus faecalis. Acute Uncomplicated Cystitis in Females caused by Escherichia coli or Staphylococcus saprophyticus. Chronic Bacterial Prostatitis caused by Escherichia coli or Proteus mirabilis. Lower Respiratory Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Pseudomonas aeruginosa, Haemophilus influenzae, Haemophilus parainfluenzae, or penicillin-susceptible Streptococcus pneumoniae.* Also, Moraxella catarrhalis for the treatment of acute exacerbations of chronic bronchitis. *Ciprofloxacin is not a drug of first choice in the treatment of presumed or confirmed pneumonia secondary to Streptococcus pneumoniae. Acute Sinusitis caused by Haemophilus influenzae, penicillin-susceptible Streptococcus pneumoniae, or Moraxella catarrhalis. Skin and Skin Structure Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Proteus vulgaris, Providencia stuartii, Morganella morganii, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus aureus, methicillin-susceptible Staphylococcus epidermidis, or Streptococcus pyogenes. Bone and Joint Infections caused by Enterobacter cloacae, Serratia marcescens, or Pseudomonas aeruginosa. Complicated Intra-Abdominal Infections (used in combination with metronidazole) caused by Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis, Klebsiella pneumoniae, or Bacteroides fragilis. Infectious Diarrhea caused by Escherichia coli (enterotoxigenic isolates), Campylobacter jejuni, Shigella boydii†, Shigella dysenteriae, Shigella flexneri or Shigella sonnei†when antibacterial therapy is indicated. †Although treatment of infections due to this organism in this organ system demonstrated a clinically significant outcome, efficacy was studied in fewer than 10 patients. Typhoid Fever (Enteric Fever) caused by Salmonella typhi. NOTE: The efficacy of ciprofloxacin in the eradication of the chronic typhoid carrier state has not been demonstrated. Uncomplicated Cervical and Urethral Gonorrhea due to Neisseria gonorrhoeae. Pediatric Patients (1 to 17 years of age). Complicated Urinary Tract Infections and Pyelonephritis due to Escherichia coli. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the pediatric population due to an increased incidence of adverse events compared to controls, including events related to joints and/or surrounding tissues. (See WARNINGS, PRECAUTIONS, Pediatric Use, ADVERSE REACTIONSandCLINICAL STUDIES.) Ciprofloxacin, like other fluoroquinolones, is associated with arthropathy and histopathological changes in weight-bearing joints of juvenile animals. (See ANIMAL PHARMACOLOGY.). Adult and Pediatric Patients. Inhalational Anthrax (post-exposure): To reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. Ciprofloxacin serum concentrations achieved in humans served as a surrogate endpoint reasonably likely to predict clinical benefit and provided the initial basis for approval of this indication.5 Supportive clinical information for ciprofloxacin for anthrax post-exposure prophylaxis was obtained during the anthrax bioterror attacks of October 2001. (See also, INHALATIONAL ANTHRAX - ADDITIONAL INFORMATION). If anaerobic organisms are suspected of contributing to the infection, appropriate therapy should be administered. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to ciprofloxacin. Therapy with ciprofloxacin tablets, USP may be initiated before results of these tests are known; once results become available appropriate therapy should be continued. As with other drugs, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with ciprofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information not only on the therapeutic effect of the antimicrobial agent but also on the possible emergence of bacterial resistance. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ciprofloxacin tablets, USP and other antibacterial drugs, ciprofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ciprofloxacin tablets, USP is a synthetic broad spectrum antimicrobial agent for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C17H18FN3O3●ŸŸHClŸ●H2O and its chemical structure is as follows. Ciprofloxacin, USP is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are cornstarch, microcrystalline cellulose, silicon dioxide, crospovidone, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol and purified water.</Description>
</NDC>
</NDCList>