{
"NDC": [
{
"NDCCode": "11673-547-54",
"PackageDescription": "54 TABLET, CHEWABLE in 1 BOTTLE (11673-547-54) ",
"NDC11Code": "11673-0547-54",
"ProductNDC": "11673-547",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Target Berry Lime Hbg Chews",
"NonProprietaryName": "Calcium Carbonate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20240222",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "Target",
"SubstanceName": "DIMETHICONE; CALCIUM CARBONATE",
"StrengthNumber": "80; 750",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Skin Barrier Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240222",
"SamplePackage": "N",
"IndicationAndUsage": "Uses Relieves : 1 Heartburn, 2 Sour stomach, 3 Acid indigestion, 4 Upset stomach due to these symptoms, 5 Bloating, pressure or stuffed feeling commonly referred to as gas."
},
{
"NDCCode": "12634-547-54",
"PackageDescription": "14 CAPSULE in 1 BLISTER PACK (12634-547-54)",
"NDC11Code": "12634-0547-54",
"ProductNDC": "12634-547",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20031023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040525",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m 2, or ≥ 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder, which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP, an anorectic agent for oral administration, is available as an oral capsule containing 30 mg of phentermine hydrochloride (equivalent to 24 mg of phentermine base). Each phentermine hydrochloride capsule also contains the following inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FDA/E 172 Yellow Iron Oxide, gelatin, magnesium stearate, povidone, and titanium dioxide. The imprinting ink contains D&C Yellow #10 Lake, FD&C Blue #1, FD&C Blue #2, and FD&C Red #40."
},
{
"NDCCode": "11673-024-54",
"PackageDescription": "269.1 mL in 1 BOTTLE, PLASTIC (11673-024-54) ",
"NDC11Code": "11673-0024-54",
"ProductNDC": "11673-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up",
"ProprietaryNameSuffix": "Acne Wash",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131025",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "TARGET CORPORATION",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190924",
"SamplePackage": "N",
"IndicationAndUsage": "for the treatment of acne."
},
{
"NDCCode": "11673-052-54",
"PackageDescription": "54 TABLET, CHEWABLE in 1 BOTTLE (11673-052-54) ",
"NDC11Code": "11673-0052-54",
"ProductNDC": "11673-052",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Target Antacid - Anti-gas Relief Chews",
"NonProprietaryName": "Calcium Carbonate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "Target",
"SubstanceName": "DIMETHICONE; CALCIUM CARBONATE",
"StrengthNumber": "80; 750",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Skin Barrier Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Uses Relieves : 1 Heartburn, 2 Sour stomach, 3 Acid indigestion, 4 Upset stomach due to these symptoms, 5 Bloating, pressure or stuffd feeling commonly referred to as gas."
},
{
"NDCCode": "11673-426-54",
"PackageDescription": "1 POUCH in 1 CARTON (11673-426-54) / 1 APPLICATOR in 1 POUCH / 4.6 g in 1 APPLICATOR",
"NDC11Code": "11673-0426-54",
"ProductNDC": "11673-426",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up Tioconazole 1",
"NonProprietaryName": "Tioconazole",
"DosageFormName": "OINTMENT",
"RouteName": "VAGINAL",
"StartMarketingDate": "20090708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075915",
"LabelerName": "Target Corporation",
"SubstanceName": "TIOCONAZOLE",
"StrengthNumber": "6.5",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090708",
"SamplePackage": "N",
"IndicationAndUsage": "treats vaginal yeast infections."
},
{
"NDCCode": "0049-0013-83",
"PackageDescription": "10 VIAL in 1 CARTON (0049-0013-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0013-81) ",
"NDC11Code": "00049-0013-83",
"ProductNDC": "0049-0013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Unasyn",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19911122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050608",
"LabelerName": "Roerig",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19911122",
"SamplePackage": "N",
"IndicationAndUsage": "UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0049-0014-83",
"PackageDescription": "10 VIAL in 1 CARTON (0049-0014-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0014-81) ",
"NDC11Code": "00049-0014-83",
"ProductNDC": "0049-0014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Unasyn",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19911122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050608",
"LabelerName": "Roerig",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19911122",
"SamplePackage": "N",
"IndicationAndUsage": "UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0049-2040-10",
"PackageDescription": "30 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0049-2040-10) ",
"NDC11Code": "00049-2040-10",
"ProductNDC": "0049-2040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET, MULTILAYER, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210121",
"EndMarketingDate": "20250331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021269",
"LabelerName": "Roerig",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210121",
"EndMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA® XL is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH). CARDURA XL is not indicated for the treatment of hypertension.",
"Description": "CARDURA XL contains doxazosin which is a quinazoline compound with the chemical name 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA XL is an extended release tablet for oral use and is designed to deliver 4 or 8 mg of doxazosin as the free base. Each 4 and 8 mg tablet contains 5.1 and 10.2 mg doxazosin mesylate (includes a 5% overage) to ensure the labeled dose of 4 and 8 mg doxazosin as the free base (equivalent to 4.9 and 9.8 mg of doxazosin mesylate), is delivered. The inactive ingredients for CARDURA XL are: polyethylene oxide, sodium chloride, hypromellose, red ferric oxide, titanium dioxide, magnesium stearate, cellulose acetate, Macrogol®, pharmaceutical glaze, and black iron oxide."
},
{
"NDCCode": "0049-2080-10",
"PackageDescription": "30 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0049-2080-10) ",
"NDC11Code": "00049-2080-10",
"ProductNDC": "0049-2080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET, MULTILAYER, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220426",
"EndMarketingDate": "20250331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021269",
"LabelerName": "Roerig",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220426",
"EndMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA® XL is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH). CARDURA XL is not indicated for the treatment of hypertension.",
"Description": "CARDURA XL contains doxazosin which is a quinazoline compound with the chemical name 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA XL is an extended release tablet for oral use and is designed to deliver 4 or 8 mg of doxazosin as the free base. Each 4 and 8 mg tablet contains 5.1 and 10.2 mg doxazosin mesylate (includes a 5% overage) to ensure the labeled dose of 4 and 8 mg doxazosin as the free base (equivalent to 4.9 and 9.8 mg of doxazosin mesylate), is delivered. The inactive ingredients for CARDURA XL are: polyethylene oxide, sodium chloride, hypromellose, red ferric oxide, titanium dioxide, magnesium stearate, cellulose acetate, Macrogol®, pharmaceutical glaze, and black iron oxide."
},
{
"NDCCode": "0049-2410-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (0049-2410-10) ",
"NDC11Code": "00049-2410-10",
"ProductNDC": "0049-2410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211019",
"EndMarketingDate": "20260331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019668",
"LabelerName": "ROERIG",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211019",
"EndMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10."
},
{
"NDCCode": "0049-2512-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (0049-2512-10) ",
"NDC11Code": "00049-2512-10",
"ProductNDC": "0049-2512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019668",
"LabelerName": "ROERIG",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211019",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10."
},
{
"NDCCode": "0049-2614-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (0049-2614-10) ",
"NDC11Code": "00049-2614-10",
"ProductNDC": "0049-2614",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211019",
"EndMarketingDate": "20270131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019668",
"LabelerName": "ROERIG",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211019",
"EndMarketingDatePackage": "20270131",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10."
},
{
"NDCCode": "0049-2716-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (0049-2716-10) ",
"NDC11Code": "00049-2716-10",
"ProductNDC": "0049-2716",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230215",
"EndMarketingDate": "20270630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019668",
"LabelerName": "ROERIG",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230215",
"EndMarketingDatePackage": "20270630",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10."
},
{
"NDCCode": "0049-2780-66",
"PackageDescription": "100 TABLET in 1 BOTTLE (0049-2780-66) ",
"NDC11Code": "00049-2780-66",
"ProductNDC": "0049-2780",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardura",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19910101",
"EndMarketingDate": "20230930",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019668",
"LabelerName": "ROERIG",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19910101",
"EndMarketingDatePackage": "20230930",
"SamplePackage": "N",
"IndicationAndUsage": "CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10."
},
{
"NDCCode": "0078-1420-15",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0078-1420-15) ",
"NDC11Code": "00078-1420-15",
"ProductNDC": "0078-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vanrafia",
"NonProprietaryName": "Atrasentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250402",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219208",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ATRASENTAN HYDROCHLORIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250402",
"SamplePackage": "N",
"IndicationAndUsage": "VANRAFIA is indicated to reduce proteinuria in adults with primary immunoglobulin A nephropathy (IgAN) at risk of rapid disease progression, generally a urine protein-to-creatinine ratio (UPCR) ≥ 1.5 g/g. This indication is approved under accelerated approval based on a reduction of proteinuria [see Clinical Studies (14.1)]. It has not been established whether VANRAFIA slows kidney function decline in patients with IgAN. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory clinical trial.",
"Description": "VANRAFIA contains atrasentan, an endothelin type A (ETA) receptor antagonist. The chemical name of atrasentan hydrochloride is (2R, 3R, 4S)-4-(1,3-benzodioxol-5-yl)-1-[2-(dibutylamino)-2-oxoethyl]-2-(4-methoxyphenyl)-3-pyrrolidinecarboxylic acid hydrochloride. Atrasentan hydrochloride has a molecular weight of 547.09 g/mol, a molecular formula of C29H38N2O6HCl and the following structural formula. Atrasentan is a slightly hygroscopic white to off-white powder that is slightly soluble in water. VANRAFIA is available as a film-coated tablet for oral administration. Each VANRAFIA tablet contains 0.75 mg atrasentan (equivalent to 0.803 mg of atrasentan hydrochloride) and contains the following excipients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, L-cysteine hydrochloride monohydrate, polyethylene glycol, and silicon dioxide."
},
{
"NDCCode": "0093-2067-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0093-2067-01) ",
"NDC11Code": "00093-2067-01",
"ProductNDC": "0093-2067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075536",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141206",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate."
},
{
"NDCCode": "0093-2068-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0093-2068-01) ",
"NDC11Code": "00093-2068-01",
"ProductNDC": "0093-2068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075536",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140912",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate."
},
{
"NDCCode": "0093-2069-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0093-2069-01) ",
"NDC11Code": "00093-2069-01",
"ProductNDC": "0093-2069",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075536",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140812",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate."
},
{
"NDCCode": "0093-2070-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0093-2070-01) ",
"NDC11Code": "00093-2070-01",
"ProductNDC": "0093-2070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075536",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140812",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate."
},
{
"NDCCode": "0378-7055-35",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0378-7055-35) / 5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00378-7055-35",
"ProductNDC": "0378-7055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bepotastine Besilate",
"NonProprietaryName": "Bepotastine Besilate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206220",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BEPOTASTINE BESILATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210528",
"SamplePackage": "N",
"IndicationAndUsage": "Bepotastine besilate ophthalmic solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.",
"Description": "Bepotastine besilate ophthalmic solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of bepotastine besilate ophthalmic solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as 4-[(S)-(4-Chlorophenyl)-2-pyridinylmethoxy]-1-piperidinebutanoic acid, benzenesulfonate salt. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white or creamish white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine besilate ophthalmic solution is supplied as a sterile, aqueous 1.5% solution, with a pH of 6.8. The osmolality of bepotastine besilate ophthalmic solution, 1.5% is approximately 290 mOsm/kg. Each mL of bepotastine besilate ophthalmic solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Preservative: benzalkonium chloride 0.005%, 3 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection."
},
{
"NDCCode": "0378-7055-67",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0378-7055-67) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00378-7055-67",
"ProductNDC": "0378-7055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bepotastine Besilate",
"NonProprietaryName": "Bepotastine Besilate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206220",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BEPOTASTINE BESILATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210528",
"SamplePackage": "N",
"IndicationAndUsage": "Bepotastine besilate ophthalmic solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.",
"Description": "Bepotastine besilate ophthalmic solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of bepotastine besilate ophthalmic solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as 4-[(S)-(4-Chlorophenyl)-2-pyridinylmethoxy]-1-piperidinebutanoic acid, benzenesulfonate salt. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white or creamish white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine besilate ophthalmic solution is supplied as a sterile, aqueous 1.5% solution, with a pH of 6.8. The osmolality of bepotastine besilate ophthalmic solution, 1.5% is approximately 290 mOsm/kg. Each mL of bepotastine besilate ophthalmic solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Preservative: benzalkonium chloride 0.005%, 3 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection."
},
{
"NDCCode": "0641-6116-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6116-10) / 1.5 g in 1 VIAL (0641-6116-01) ",
"NDC11Code": "00641-6116-10",
"ProductNDC": "0641-6116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20091222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1.5g; g/1.5g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091222",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0641-6117-10",
"PackageDescription": "10 VIAL in 1 CARTON (0641-6117-10) / 3 g in 1 VIAL (0641-6117-01) ",
"NDC11Code": "00641-6117-10",
"ProductNDC": "0641-6117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20091222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/3g; g/3g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091222",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "0832-0356-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (0832-0356-11) ",
"NDC11Code": "00832-0356-11",
"ProductNDC": "0832-0356",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209013",
"LabelerName": "Upsher-Smith laboratories, LLC",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180417",
"EndMarketingDatePackage": "20270131",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate."
},
{
"NDCCode": "0832-0357-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (0832-0357-11) ",
"NDC11Code": "00832-0357-11",
"ProductNDC": "0832-0357",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209013",
"LabelerName": "Upsher-Smith laboratories, LLC",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180417",
"EndMarketingDatePackage": "20270831",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate."
},
{
"NDCCode": "0832-1358-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (0832-1358-11) ",
"NDC11Code": "00832-1358-11",
"ProductNDC": "0832-1358",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209013",
"LabelerName": "Upsher-Smith laboratories, LLC",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180417",
"EndMarketingDatePackage": "20270831",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate."
},
{
"NDCCode": "0832-1359-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (0832-1359-11) ",
"NDC11Code": "00832-1359-11",
"ProductNDC": "0832-1359",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209013",
"LabelerName": "Upsher-Smith laboratories, LLC",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180417",
"EndMarketingDatePackage": "20270131",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.",
"Description": "Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate."
},
{
"NDCCode": "0904-5522-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-5522-61) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00904-5522-61",
"ProductNDC": "0904-5522",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075580",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110714",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.",
"Description": "Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "0904-5523-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-5523-61) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00904-5523-61",
"ProductNDC": "0904-5523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075580",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110714",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.",
"Description": "Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "0904-5524-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-5524-61) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00904-5524-61",
"ProductNDC": "0904-5524",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxazosin",
"NonProprietaryName": "Doxazosin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075580",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "DOXAZOSIN MESYLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110714",
"SamplePackage": "N",
"IndicationAndUsage": "Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.",
"Description": "Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>11673-547-54</NDCCode>
<PackageDescription>54 TABLET, CHEWABLE in 1 BOTTLE (11673-547-54) </PackageDescription>
<NDC11Code>11673-0547-54</NDC11Code>
<ProductNDC>11673-547</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Target Berry Lime Hbg Chews</ProprietaryName>
<NonProprietaryName>Calcium Carbonate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240222</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>Target</LabelerName>
<SubstanceName>DIMETHICONE; CALCIUM CARBONATE</SubstanceName>
<StrengthNumber>80; 750</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses Relieves : 1 Heartburn, 2 Sour stomach, 3 Acid indigestion, 4 Upset stomach due to these symptoms, 5 Bloating, pressure or stuffed feeling commonly referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>12634-547-54</NDCCode>
<PackageDescription>14 CAPSULE in 1 BLISTER PACK (12634-547-54)</PackageDescription>
<NDC11Code>12634-0547-54</NDC11Code>
<ProductNDC>12634-547</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20031023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040525</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m 2, or ≥ 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder, which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP, an anorectic agent for oral administration, is available as an oral capsule containing 30 mg of phentermine hydrochloride (equivalent to 24 mg of phentermine base). Each phentermine hydrochloride capsule also contains the following inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FDA/E 172 Yellow Iron Oxide, gelatin, magnesium stearate, povidone, and titanium dioxide. The imprinting ink contains D&C Yellow #10 Lake, FD&C Blue #1, FD&C Blue #2, and FD&C Red #40.</Description>
</NDC>
<NDC>
<NDCCode>11673-024-54</NDCCode>
<PackageDescription>269.1 mL in 1 BOTTLE, PLASTIC (11673-024-54) </PackageDescription>
<NDC11Code>11673-0024-54</NDC11Code>
<ProductNDC>11673-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up</ProprietaryName>
<ProprietaryNameSuffix>Acne Wash</ProprietaryNameSuffix>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131025</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>TARGET CORPORATION</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-052-54</NDCCode>
<PackageDescription>54 TABLET, CHEWABLE in 1 BOTTLE (11673-052-54) </PackageDescription>
<NDC11Code>11673-0052-54</NDC11Code>
<ProductNDC>11673-052</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Target Antacid - Anti-gas Relief Chews</ProprietaryName>
<NonProprietaryName>Calcium Carbonate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>Target</LabelerName>
<SubstanceName>DIMETHICONE; CALCIUM CARBONATE</SubstanceName>
<StrengthNumber>80; 750</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses Relieves : 1 Heartburn, 2 Sour stomach, 3 Acid indigestion, 4 Upset stomach due to these symptoms, 5 Bloating, pressure or stuffd feeling commonly referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-426-54</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (11673-426-54) / 1 APPLICATOR in 1 POUCH / 4.6 g in 1 APPLICATOR</PackageDescription>
<NDC11Code>11673-0426-54</NDC11Code>
<ProductNDC>11673-426</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up Tioconazole 1</ProprietaryName>
<NonProprietaryName>Tioconazole</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>VAGINAL</RouteName>
<StartMarketingDate>20090708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075915</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>TIOCONAZOLE</SubstanceName>
<StrengthNumber>6.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats vaginal yeast infections.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0049-0013-83</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0049-0013-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0013-81) </PackageDescription>
<NDC11Code>00049-0013-83</NDC11Code>
<ProductNDC>0049-0013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Unasyn</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19911122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050608</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19911122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0049-0014-83</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0049-0014-83) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0049-0014-81) </PackageDescription>
<NDC11Code>00049-0014-83</NDC11Code>
<ProductNDC>0049-0014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Unasyn</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19911122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050608</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19911122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp. (including K. pneumoniae), Proteus mirabilis, Bacteroides fragilis, Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae), Bacteroides spp. (including B. fragilis), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp. (including B. fragilis). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0049-2040-10</NDCCode>
<PackageDescription>30 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0049-2040-10) </PackageDescription>
<NDC11Code>00049-2040-10</NDC11Code>
<ProductNDC>0049-2040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210121</StartMarketingDate>
<EndMarketingDate>20250331</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021269</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210121</StartMarketingDatePackage>
<EndMarketingDatePackage>20250331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA® XL is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH). CARDURA XL is not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>CARDURA XL contains doxazosin which is a quinazoline compound with the chemical name 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA XL is an extended release tablet for oral use and is designed to deliver 4 or 8 mg of doxazosin as the free base. Each 4 and 8 mg tablet contains 5.1 and 10.2 mg doxazosin mesylate (includes a 5% overage) to ensure the labeled dose of 4 and 8 mg doxazosin as the free base (equivalent to 4.9 and 9.8 mg of doxazosin mesylate), is delivered. The inactive ingredients for CARDURA XL are: polyethylene oxide, sodium chloride, hypromellose, red ferric oxide, titanium dioxide, magnesium stearate, cellulose acetate, Macrogol®, pharmaceutical glaze, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0049-2080-10</NDCCode>
<PackageDescription>30 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0049-2080-10) </PackageDescription>
<NDC11Code>00049-2080-10</NDC11Code>
<ProductNDC>0049-2080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220426</StartMarketingDate>
<EndMarketingDate>20250331</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021269</ApplicationNumber>
<LabelerName>Roerig</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220426</StartMarketingDatePackage>
<EndMarketingDatePackage>20250331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA® XL is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH). CARDURA XL is not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>CARDURA XL contains doxazosin which is a quinazoline compound with the chemical name 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA XL is an extended release tablet for oral use and is designed to deliver 4 or 8 mg of doxazosin as the free base. Each 4 and 8 mg tablet contains 5.1 and 10.2 mg doxazosin mesylate (includes a 5% overage) to ensure the labeled dose of 4 and 8 mg doxazosin as the free base (equivalent to 4.9 and 9.8 mg of doxazosin mesylate), is delivered. The inactive ingredients for CARDURA XL are: polyethylene oxide, sodium chloride, hypromellose, red ferric oxide, titanium dioxide, magnesium stearate, cellulose acetate, Macrogol®, pharmaceutical glaze, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0049-2410-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0049-2410-10) </PackageDescription>
<NDC11Code>00049-2410-10</NDC11Code>
<ProductNDC>0049-2410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211019</StartMarketingDate>
<EndMarketingDate>20260331</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019668</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211019</StartMarketingDatePackage>
<EndMarketingDatePackage>20260331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10.</Description>
</NDC>
<NDC>
<NDCCode>0049-2512-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0049-2512-10) </PackageDescription>
<NDC11Code>00049-2512-10</NDC11Code>
<ProductNDC>0049-2512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019668</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10.</Description>
</NDC>
<NDC>
<NDCCode>0049-2614-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0049-2614-10) </PackageDescription>
<NDC11Code>00049-2614-10</NDC11Code>
<ProductNDC>0049-2614</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211019</StartMarketingDate>
<EndMarketingDate>20270131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019668</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211019</StartMarketingDatePackage>
<EndMarketingDatePackage>20270131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10.</Description>
</NDC>
<NDC>
<NDCCode>0049-2716-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0049-2716-10) </PackageDescription>
<NDC11Code>00049-2716-10</NDC11Code>
<ProductNDC>0049-2716</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230215</StartMarketingDate>
<EndMarketingDate>20270630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019668</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230215</StartMarketingDatePackage>
<EndMarketingDatePackage>20270630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10.</Description>
</NDC>
<NDC>
<NDCCode>0049-2780-66</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0049-2780-66) </PackageDescription>
<NDC11Code>00049-2780-66</NDC11Code>
<ProductNDC>0049-2780</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardura</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19910101</StartMarketingDate>
<EndMarketingDate>20230930</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019668</ApplicationNumber>
<LabelerName>ROERIG</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19910101</StartMarketingDatePackage>
<EndMarketingDatePackage>20230930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDURA is an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>CARDURA® (doxazosin) is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. CARDURA (doxazosin) is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. CARDURA is available as colored tablets for oral use and contains doxazosin mesylate equivalent to 1 mg (white), 2 mg (yellow or white), 4 mg (orange or white) and 8 mg (green or white) of doxazosin as the free base. The inactive ingredients for all tablets are microcrystalline cellulose, lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate. The 2 mg yellow tablet contains D & C yellow 10 and FD & C yellow 6; the 4 mg orange tablet contains FD & C yellow 6; the 8 mg green tablet contains FD & C blue 2 and D & C yellow 10.</Description>
</NDC>
<NDC>
<NDCCode>0078-1420-15</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0078-1420-15) </PackageDescription>
<NDC11Code>00078-1420-15</NDC11Code>
<ProductNDC>0078-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vanrafia</ProprietaryName>
<NonProprietaryName>Atrasentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250402</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219208</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ATRASENTAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VANRAFIA is indicated to reduce proteinuria in adults with primary immunoglobulin A nephropathy (IgAN) at risk of rapid disease progression, generally a urine protein-to-creatinine ratio (UPCR) ≥ 1.5 g/g. This indication is approved under accelerated approval based on a reduction of proteinuria [see Clinical Studies (14.1)]. It has not been established whether VANRAFIA slows kidney function decline in patients with IgAN. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory clinical trial.</IndicationAndUsage>
<Description>VANRAFIA contains atrasentan, an endothelin type A (ETA) receptor antagonist. The chemical name of atrasentan hydrochloride is (2R, 3R, 4S)-4-(1,3-benzodioxol-5-yl)-1-[2-(dibutylamino)-2-oxoethyl]-2-(4-methoxyphenyl)-3-pyrrolidinecarboxylic acid hydrochloride. Atrasentan hydrochloride has a molecular weight of 547.09 g/mol, a molecular formula of C29H38N2O6HCl and the following structural formula. Atrasentan is a slightly hygroscopic white to off-white powder that is slightly soluble in water. VANRAFIA is available as a film-coated tablet for oral administration. Each VANRAFIA tablet contains 0.75 mg atrasentan (equivalent to 0.803 mg of atrasentan hydrochloride) and contains the following excipients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, L-cysteine hydrochloride monohydrate, polyethylene glycol, and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-2067-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0093-2067-01) </PackageDescription>
<NDC11Code>00093-2067-01</NDC11Code>
<ProductNDC>0093-2067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075536</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0093-2068-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0093-2068-01) </PackageDescription>
<NDC11Code>00093-2068-01</NDC11Code>
<ProductNDC>0093-2068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075536</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0093-2069-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0093-2069-01) </PackageDescription>
<NDC11Code>00093-2069-01</NDC11Code>
<ProductNDC>0093-2069</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075536</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0093-2070-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0093-2070-01) </PackageDescription>
<NDC11Code>00093-2070-01</NDC11Code>
<ProductNDC>0093-2070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075536</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. It has the following structure. C23H25N5O5CH4O3S M.W. 547.58. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each Doxazosin Tablet USP, for oral administration, contains doxazosin mesylate equivalent to 1 mg, 2 mg, 4 mg, or 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0378-7055-35</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0378-7055-35) / 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00378-7055-35</NDC11Code>
<ProductNDC>0378-7055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bepotastine Besilate</ProprietaryName>
<NonProprietaryName>Bepotastine Besilate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206220</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BEPOTASTINE BESILATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bepotastine besilate ophthalmic solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
<Description>Bepotastine besilate ophthalmic solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of bepotastine besilate ophthalmic solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as 4-[(S)-(4-Chlorophenyl)-2-pyridinylmethoxy]-1-piperidinebutanoic acid, benzenesulfonate salt. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white or creamish white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine besilate ophthalmic solution is supplied as a sterile, aqueous 1.5% solution, with a pH of 6.8. The osmolality of bepotastine besilate ophthalmic solution, 1.5% is approximately 290 mOsm/kg. Each mL of bepotastine besilate ophthalmic solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Preservative: benzalkonium chloride 0.005%, 3 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>0378-7055-67</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0378-7055-67) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00378-7055-67</NDC11Code>
<ProductNDC>0378-7055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bepotastine Besilate</ProprietaryName>
<NonProprietaryName>Bepotastine Besilate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206220</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BEPOTASTINE BESILATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bepotastine besilate ophthalmic solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
<Description>Bepotastine besilate ophthalmic solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of bepotastine besilate ophthalmic solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as 4-[(S)-(4-Chlorophenyl)-2-pyridinylmethoxy]-1-piperidinebutanoic acid, benzenesulfonate salt. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white or creamish white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine besilate ophthalmic solution is supplied as a sterile, aqueous 1.5% solution, with a pH of 6.8. The osmolality of bepotastine besilate ophthalmic solution, 1.5% is approximately 290 mOsm/kg. Each mL of bepotastine besilate ophthalmic solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Preservative: benzalkonium chloride 0.005%, 3 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>0641-6116-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6116-10) / 1.5 g in 1 VIAL (0641-6116-01) </PackageDescription>
<NDC11Code>00641-6116-10</NDC11Code>
<ProductNDC>0641-6116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20091222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1.5g; g/1.5g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0641-6117-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0641-6117-10) / 3 g in 1 VIAL (0641-6117-01) </PackageDescription>
<NDC11Code>00641-6117-10</NDC11Code>
<ProductNDC>0641-6117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20091222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/3g; g/3g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0832-0356-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0832-0356-11) </PackageDescription>
<NDC11Code>00832-0356-11</NDC11Code>
<ProductNDC>0832-0356</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209013</ApplicationNumber>
<LabelerName>Upsher-Smith laboratories, LLC</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0832-0357-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0832-0357-11) </PackageDescription>
<NDC11Code>00832-0357-11</NDC11Code>
<ProductNDC>0832-0357</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209013</ApplicationNumber>
<LabelerName>Upsher-Smith laboratories, LLC</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0832-1358-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0832-1358-11) </PackageDescription>
<NDC11Code>00832-1358-11</NDC11Code>
<ProductNDC>0832-1358</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209013</ApplicationNumber>
<LabelerName>Upsher-Smith laboratories, LLC</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0832-1359-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0832-1359-11) </PackageDescription>
<NDC11Code>00832-1359-11</NDC11Code>
<ProductNDC>0832-1359</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209013</ApplicationNumber>
<LabelerName>Upsher-Smith laboratories, LLC</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha 1adrenergic antagonist indicated for: ( 1) : 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin is a quinazoline compound that is a selective inhibitor of the alpha 1subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C 23H 25N 5O 5∙ CH 4O 3S and the molecular weight is 547.6. It has the following structure:. Doxazosin is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0904-5522-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-5522-61) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-5522-61</NDC11Code>
<ProductNDC>0904-5522</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075580</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>0904-5523-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-5523-61) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-5523-61</NDC11Code>
<ProductNDC>0904-5523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075580</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>0904-5524-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-5524-61) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-5524-61</NDC11Code>
<ProductNDC>0904-5524</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxazosin</ProprietaryName>
<NonProprietaryName>Doxazosin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075580</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of HypertensionTreatment of Hypertension.</IndicationAndUsage>
<Description>Doxazosin mesylate is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate is 1-(4-amino-6,7- dimethoxy-2-quinazolinyl)-4-(1,4-benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The empirical formula for doxazosin mesylate is C23H25N5O5 CH4O3S and the molecular weight is 547.6. It has the following structure:. Doxazosin mesylate is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Each doxazosin tablet, USP, for oral administration, contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. In addition, each doxazosin tablet, USP contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
</NDCList>