RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "11822-1090-8",
      "PackageDescription": "222 mL in 1 BOTTLE, PLASTIC (11822-1090-8)",
      "NDC11Code": "11822-1090-08",
      "ProductNDC": "11822-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Daylogic Fresh Pear Foaming",
      "NonProprietaryName": "Benzalkonium Chloride",
      "DosageFormName": "SOAP",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20170509",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part333E",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "BENZALKONIUM CHLORIDE",
      "StrengthNumber": "1.3",
      "StrengthUnit": "mg/mL",
      "Status": "Deprecated",
      "LastUpdate": "2024-01-02",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20231231",
      "IndicationAndUsage": "for hand washing to decrease bacteria on the skin."
    },
    {
      "NDCCode": "11822-1090-7",
      "PackageDescription": "222 mL in 1 BOTTLE, PLASTIC (11822-1090-7)",
      "NDC11Code": "11822-1090-07",
      "ProductNDC": "11822-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Daylogic Fresh Pear Foaming",
      "NonProprietaryName": "Benzalkonium Chloride",
      "DosageFormName": "SOAP",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20160807",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part333E",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "BENZALKONIUM CHLORIDE",
      "StrengthNumber": "1.3",
      "StrengthUnit": "mg/mL",
      "Status": "Deprecated",
      "LastUpdate": "2024-01-02",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20231231",
      "IndicationAndUsage": "for hand washing to decrease bacteria on the skin."
    },
    {
      "NDCCode": "0074-4456-04",
      "PackageDescription": "250 mL in 1 BOTTLE, PLASTIC (0074-4456-04) ",
      "NDC11Code": "00074-4456-04",
      "ProductNDC": "0074-4456",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ultane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "19950607",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA020478",
      "LabelerName": "AbbVie Inc.",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "19950607",
      "SamplePackage": "N",
      "IndicationAndUsage": "ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "0074-4456-51",
      "PackageDescription": "250 mL in 1 BOTTLE, PLASTIC (0074-4456-51) ",
      "NDC11Code": "00074-4456-51",
      "ProductNDC": "0074-4456",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ultane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "19950607",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA020478",
      "LabelerName": "AbbVie Inc.",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-25",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "19950607",
      "SamplePackage": "N",
      "IndicationAndUsage": "ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "0527-6123-74",
      "PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0527-6123-74)  / 250 mL in 1 BOTTLE, GLASS",
      "NDC11Code": "00527-6123-74",
      "ProductNDC": "0527-6123",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20230818",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA214382",
      "LabelerName": "Lannett Company, Inc.",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2023-09-22",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20230818",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "10019-651-64",
      "PackageDescription": "6 BOTTLE in 1 CARTON (10019-651-64)  / 250 mL in 1 BOTTLE",
      "NDC11Code": "10019-0651-64",
      "ProductNDC": "10019-651",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20020702",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA075895",
      "LabelerName": "Baxter Healthcare Company",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-02-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20020702",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "10019-653-64",
      "PackageDescription": "6 BOTTLE in 1 CARTON (10019-653-64)  / 250 mL in 1 BOTTLE",
      "NDC11Code": "10019-0653-64",
      "ProductNDC": "10019-653",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20020707",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA075895",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-02-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20020707",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "10019-655-06",
      "PackageDescription": "6 BOTTLE in 1 CARTON (10019-655-06)  / 250 mL in 1 BOTTLE",
      "NDC11Code": "10019-0655-06",
      "ProductNDC": "10019-655",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20020702",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA075895",
      "LabelerName": "Baxter Healthcare Company",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-02-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220726",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "10019-657-06",
      "PackageDescription": "6 BOTTLE in 1 CARTON (10019-657-06)  / 250 mL in 1 BOTTLE",
      "NDC11Code": "10019-0657-06",
      "ProductNDC": "10019-657",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20020707",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA075895",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-02-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220726",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "12164-005-25",
      "PackageDescription": "250 mL in 1 BOTTLE (12164-005-25) ",
      "NDC11Code": "12164-0005-25",
      "ProductNDC": "12164-005",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20071119",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078650",
      "LabelerName": "Halocarbon Life Sciences, LLC",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-12-23",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20071119",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g.Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1, 1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050 to 1090 ppm (male-female) and, at 3 hours, 350 to 490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "42677-308-01",
      "PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (42677-308-01)  / 250 mL in 1 BOTTLE, GLASS",
      "NDC11Code": "42677-0308-01",
      "ProductNDC": "42677-308",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20230818",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA214382",
      "LabelerName": "Shandong New Time Pharmaceutical Co., Ltd.",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20230818",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is：. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2absorbents (e.g., Baralyme ®and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2and Compound A production is illustrated in the following in vitro simulation where CO 2was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "43742-1090-1",
      "PackageDescription": "126 g in 1 TUBE (43742-1090-1) ",
      "NDC11Code": "43742-1090-01",
      "ProductNDC": "43742-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Trauma Relief",
      "NonProprietaryName": "Chamomilla, Echinacea (angustifolia), Hamamelis Virginiana, Hypericum Perforatum, Millefolium, Bryonia (alba), Calendula Officinalis, Arnica Montana, Bellis Perennis, Clematis Vitalba, Flos, Helianthemum Nummularium, Flos, Impatiens Glandulifera, Flos, Ornithogalum Umbellatum, Flos, Prunus Cerasifera, Flos, Symphytum Officinale, Rhus Tox, Hepar Sulphuris Calcareum, Carbo Vegetabilis",
      "DosageFormName": "GEL",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20171102",
      "EndMarketingDate": "20230828",
      "MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
      "LabelerName": "Deseret Biologicals, Inc.",
      "SubstanceName": "ACHILLEA MILLEFOLIUM; ACTIVATED CHARCOAL; ARNICA MONTANA; BELLIS PERENNIS; BRYONIA ALBA ROOT; CALCIUM SULFIDE; CALENDULA OFFICINALIS FLOWERING TOP; CLEMATIS VITALBA FLOWER; COMFREY ROOT; ECHINACEA ANGUSTIFOLIA; HAMAMELIS VIRGINIANA ROOT BARK/STEM BARK; HELIANTHEMUM NUMMULARIUM FLOWER; HYPERICUM PERFORATUM; IMPATIENS GLANDULIFERA FLOWER; MATRICARIA RECUTITA; ORNITHOGALUM UMBELLATUM FLOWERING TOP; PRUNUS CERASIFERA FLOWER; TOXICODENDRON PUBESCENS LEAF",
      "StrengthNumber": "3; 12; 4; 6; 4; 8; 4; 6; 6; 3; 3; 6; 3; 6; 3; 6; 6; 6",
      "StrengthUnit": "[hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g; [hp_X]/g",
      "Status": "Deprecated",
      "LastUpdate": "2023-08-28",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20171102",
      "EndMarketingDatePackage": "20230828",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "58181-5200-1",
      "PackageDescription": "1 BOTTLE, GLASS in 1 PACKAGE (58181-5200-1)  / 250 mL in 1 BOTTLE, GLASS",
      "NDC11Code": "58181-5200-01",
      "ProductNDC": "58181-5200",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20240221",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA214382",
      "LabelerName": "NextSource Pharma",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2026-01-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20240221",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2absorbents (e.g., Baralyme ®and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2absorbents (especially with potassium hydroxide containing absorbents e.g. Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2and Compound A production is illustrated in the following in vitrosimulation where CO 2was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min​. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "64942-1090-1",
      "PackageDescription": "74 g in 1 CONTAINER (64942-1090-1)",
      "NDC11Code": "64942-1090-01",
      "ProductNDC": "64942-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Dove Ultimate Sensitive Care Fragrance Free",
      "ProprietaryNameSuffix": "Antiperspirant And Deodorant",
      "NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
      "DosageFormName": "STICK",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20100101",
      "MarketingCategoryName": "OTC MONOGRAPH FINAL",
      "ApplicationNumber": "part350",
      "LabelerName": "Conopco Inc. d/b/a Unilever",
      "SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
      "StrengthNumber": "14.8",
      "StrengthUnit": "g/100g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20181231"
    },
    {
      "NDCCode": "64942-1090-2",
      "PackageDescription": "14 g in 1 CONTAINER (64942-1090-2)",
      "NDC11Code": "64942-1090-02",
      "ProductNDC": "64942-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Dove Ultimate Sensitive Care Fragrance Free",
      "ProprietaryNameSuffix": "Antiperspirant And Deodorant",
      "NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
      "DosageFormName": "STICK",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20100101",
      "MarketingCategoryName": "OTC MONOGRAPH FINAL",
      "ApplicationNumber": "part350",
      "LabelerName": "Conopco Inc. d/b/a Unilever",
      "SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
      "StrengthNumber": "14.8",
      "StrengthUnit": "g/100g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20181231"
    },
    {
      "NDCCode": "66794-012-10",
      "PackageDescription": "100 mL in 1 BOTTLE, GLASS (66794-012-10) ",
      "NDC11Code": "66794-0012-10",
      "ProductNDC": "66794-012",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sojourn",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20100413",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Piramal Critical Care Inc",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2025-07-11",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20100413",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sojourn ® (sevoflurane, USP) is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sojourn ® (sevoflurane, USP) should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane, USP should be used.",
      "Description": "Sojourn ® (sevoflurane, USP), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2- bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "66794-012-25",
      "PackageDescription": "250 mL in 1 BOTTLE, GLASS (66794-012-25) ",
      "NDC11Code": "66794-0012-25",
      "ProductNDC": "66794-012",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sojourn",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20100413",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Piramal Critical Care Inc",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-12-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20100413",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sojourn ® (sevoflurane, USP) is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sojourn ® (sevoflurane, USP) should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane, USP should be used.",
      "Description": "Sojourn ® (sevoflurane, USP), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2- bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "66794-015-10",
      "PackageDescription": "100 mL in 1 BOTTLE (66794-015-10) ",
      "NDC11Code": "66794-0015-10",
      "ProductNDC": "66794-015",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20110715",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Piramal Critical Care Inc",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2025-08-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20110715",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane, USP is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane, USP should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane, USP should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2- bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50 reported at 1 hour is 1050 - 1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "66794-015-25",
      "PackageDescription": "250 mL in 1 BOTTLE (66794-015-25) ",
      "NDC11Code": "66794-0015-25",
      "ProductNDC": "66794-015",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20110715",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Piramal Critical Care Inc",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-10-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20110715",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane, USP is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane, USP should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane, USP should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2- bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50 reported at 1 hour is 1050 - 1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "66794-022-25",
      "PackageDescription": "250 mL in 1 BOTTLE (66794-022-25) ",
      "NDC11Code": "66794-0022-25",
      "ProductNDC": "66794-022",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20201001",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Piramal Critical Care Inc",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-12-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20201001",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane, USP is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane, USP should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g. Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1- difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "68599-1090-3",
      "PackageDescription": "300 LOZENGE in 1 BOX (68599-1090-3) ",
      "NDC11Code": "68599-1090-03",
      "ProductNDC": "68599-1090",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Mckesson Sugar Free Cough Suppressant Oral Anesthetic",
      "NonProprietaryName": "Menthol Lozenge",
      "DosageFormName": "LOZENGE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220901",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M012",
      "LabelerName": "McKesson Medical-Surgical",
      "SubstanceName": "MENTHOL, UNSPECIFIED FORM",
      "StrengthNumber": "5.8",
      "StrengthUnit": "mg/1",
      "Status": "Active",
      "LastUpdate": "2025-09-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20220901",
      "SamplePackage": "N",
      "IndicationAndUsage": "Uses. Temporarily relieves: 1 cough as may occur with a cold or inhaled irritants, 2 occasional minor irritation and sore throat."
    },
    {
      "NDCCode": "72162-2245-2",
      "PackageDescription": "250 mL in 1 BOTTLE (72162-2245-2) ",
      "NDC11Code": "72162-2245-02",
      "ProductNDC": "72162-2245",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20110715",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA077867",
      "LabelerName": "Bryant Ranch Prepack",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "1",
      "StrengthUnit": "mL/mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-11-08",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20240129",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane, USP is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane, USP should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane, USP should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2 absorbents (e.g., Baralyme ® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2- bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2 and Compound A production is illustrated in the following in vitro simulation where CO 2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO 2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50 reported at 1 hour is 1050 - 1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "83301-0070-1",
      "PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (83301-0070-1)  / 250 mL in 1 BOTTLE, GLASS",
      "NDC11Code": "83301-0070-01",
      "ProductNDC": "83301-0070",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sevoflurane, (volatile For Inhalation)",
      "NonProprietaryName": "Sevoflurane",
      "DosageFormName": "LIQUID",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260216",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA214382",
      "LabelerName": "Mullan Pharmaceutical Inc.",
      "SubstanceName": "SEVOFLURANE",
      "StrengthNumber": "250",
      "StrengthUnit": "mL/250mL",
      "Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-04-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260216",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
      "Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2absorbents (e.g., Baralyme ®and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2and Compound A production is illustrated in the following in vitrosimulation where CO 2was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm∙hr versus MAC∙hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (>2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
    },
    {
      "NDCCode": "11822-0012-8",
      "PackageDescription": "4 BLISTER PACK in 1 CARTON (11822-0012-8)  > 6 TABLET, CHEWABLE in 1 BLISTER PACK",
      "NDC11Code": "11822-0012-08",
      "ProductNDC": "11822-0012",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Junior Pain Relief",
      "NonProprietaryName": "Acetaminophen",
      "DosageFormName": "TABLET, CHEWABLE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20050225",
      "EndMarketingDate": "20200606",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part343",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "ACETAMINOPHEN",
      "StrengthNumber": "160",
      "StrengthUnit": "mg/1",
      "Status": "Deprecated",
      "LastUpdate": "2020-06-09",
      "ProductNdcExcludeFlag": "N"
    },
    {
      "NDCCode": "11822-0017-8",
      "PackageDescription": "100 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC (11822-0017-8) ",
      "NDC11Code": "11822-0017-08",
      "ProductNDC": "11822-0017",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Stool Softener Laxative",
      "NonProprietaryName": "Docusate Sodium",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20201231",
      "EndMarketingDate": "20260228",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M007",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "DOCUSATE SODIUM",
      "StrengthNumber": "100",
      "StrengthUnit": "mg/1",
      "Status": "Deprecated",
      "LastUpdate": "2026-03-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20201231",
      "EndMarketingDatePackage": "20260228",
      "SamplePackage": "N",
      "IndicationAndUsage": "relieves occasional constipation (irregularity) . generally produces bowel movement in 12 to 72 hours."
    },
    {
      "NDCCode": "11822-0110-8",
      "PackageDescription": "237 mL in 1 BOTTLE, PLASTIC (11822-0110-8) ",
      "NDC11Code": "11822-0110-08",
      "ProductNDC": "11822-0110",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Peptic Relief",
      "NonProprietaryName": "Bismuth Subsalicylate",
      "DosageFormName": "SUSPENSION",
      "RouteName": "ORAL",
      "StartMarketingDate": "20090603",
      "EndMarketingDate": "20191230",
      "MarketingCategoryName": "OTC MONOGRAPH FINAL",
      "ApplicationNumber": "part335",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "BISMUTH SUBSALICYLATE",
      "StrengthNumber": "262",
      "StrengthUnit": "mg/15mL",
      "Status": "Deprecated",
      "LastUpdate": "2019-12-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20090603",
      "EndMarketingDatePackage": "20191230",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "11822-0112-8",
      "PackageDescription": "1 BLISTER PACK in 1 CARTON (11822-0112-8)  / 24 TABLET, FILM COATED in 1 BLISTER PACK",
      "NDC11Code": "11822-0112-08",
      "ProductNDC": "11822-0112",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sinus Pressure And Congestion Relief",
      "ProprietaryNameSuffix": "Maximum Strength",
      "NonProprietaryName": "Pseudoephedrine Hcl",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "19810825",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M012",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
      "StrengthNumber": "30",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-03-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "19810825",
      "SamplePackage": "N",
      "IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure."
    },
    {
      "NDCCode": "11822-0120-9",
      "PackageDescription": "9.8 mL in 1 BOTTLE, WITH APPLICATOR (11822-0120-9) ",
      "NDC11Code": "11822-0120-09",
      "ProductNDC": "11822-0120",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Salicylic Acid",
      "NonProprietaryName": "Corn And Callus Remover Liquid",
      "DosageFormName": "LIQUID",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20171222",
      "EndMarketingDate": "20260630",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M030",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "SALICYLIC ACID",
      "StrengthNumber": ".17",
      "StrengthUnit": "mg/9.8mL",
      "Status": "Deprecated",
      "LastUpdate": "2026-07-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20171222",
      "EndMarketingDatePackage": "20260630",
      "SamplePackage": "N",
      "IndicationAndUsage": "for the removal of corns and calluses. relieves pain by removing corns and calluses."
    },
    {
      "NDCCode": "11822-0123-8",
      "PackageDescription": "18 PATCH in 1 PACKAGE (11822-0123-8) ",
      "NDC11Code": "11822-0123-08",
      "ProductNDC": "11822-0123",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Salicylic Acid",
      "NonProprietaryName": "Ultra Thin Corn Removers",
      "DosageFormName": "PATCH",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20171222",
      "EndMarketingDate": "20260920",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M030",
      "LabelerName": "Rite Aid Corporation",
      "SubstanceName": "SALICYLIC ACID",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/181",
      "Status": "Active",
      "LastUpdate": "2025-06-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20171222",
      "EndMarketingDatePackage": "20260920",
      "SamplePackage": "N",
      "IndicationAndUsage": "for the removal of corns. relieves pain by removing corns."
    },
    {
      "NDCCode": "11822-0150-1",
      "PackageDescription": "1 KIT in 1 CARTON (11822-0150-1)  *  8 BLISTER PACK in 1 KIT > 2 CAPSULE, LIQUID FILLED in 1 BLISTER PACK *  16 BLISTER PACK in 1 KIT > 2 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
      "NDC11Code": "11822-0150-01",
      "ProductNDC": "11822-0150",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Cold And Flu Relief",
      "ProprietaryNameSuffix": "Daytime Nighttime",
      "NonProprietaryName": "Acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20121013",
      "MarketingCategoryName": "OTC MONOGRAPH FINAL",
      "ApplicationNumber": "part341",
      "LabelerName": "Rite Aid Corporation",
      "Status": "Deprecated",
      "LastUpdate": "2017-11-22"
    }
  ]
}
                    

{"NDC":[{"NDCCode":"11822-1090-8","ProprietaryName":"Daylogic Fresh Pear Foaming","NonProprietaryName":"Benzalkonium Chloride"},{"NDCCode":"11822-1090-7","ProprietaryName":"Daylogic Fresh Pear Foaming","NonProprietaryName":"Benzalkonium Chloride"},{"NDCCode":"0074-4456-04","ProprietaryName":"Ultane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"0074-4456-51","ProprietaryName":"Ultane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"0527-6123-74","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"10019-651-64","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"10019-653-64","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"10019-655-06","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"10019-657-06","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"12164-005-25","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"42677-308-01","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"43742-1090-1","ProprietaryName":"Trauma Relief","NonProprietaryName":"Chamomilla, Echinacea (angustifolia), Hamamelis Virginiana, Hypericum Perforatum, Millefolium, Bryonia (alba), Calendula Officinalis, Arnica Montana, Bellis Perennis, Clematis Vitalba, Flos, Helianthemum Nummularium, Flos, Impatiens Glandulifera, Flos, Ornithogalum Umbellatum, Flos, Prunus Cerasifera, Flos, Symphytum Officinale, Rhus Tox, Hepar Sulphuris Calcareum, Carbo Vegetabilis"},{"NDCCode":"58181-5200-1","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"64942-1090-1","ProprietaryName":"Dove Ultimate Sensitive Care Fragrance Free","NonProprietaryName":"Aluminum Zirconium Tetrachlorohydrex Gly"},{"NDCCode":"64942-1090-2","ProprietaryName":"Dove Ultimate Sensitive Care Fragrance Free","NonProprietaryName":"Aluminum Zirconium Tetrachlorohydrex Gly"},{"NDCCode":"66794-012-10","ProprietaryName":"Sojourn","NonProprietaryName":"Sevoflurane"},{"NDCCode":"66794-012-25","ProprietaryName":"Sojourn","NonProprietaryName":"Sevoflurane"},{"NDCCode":"66794-015-10","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"66794-015-25","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"66794-022-25","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"68599-1090-3","ProprietaryName":"Mckesson Sugar Free Cough Suppressant Oral Anesthetic","NonProprietaryName":"Menthol Lozenge"},{"NDCCode":"72162-2245-2","ProprietaryName":"Sevoflurane","NonProprietaryName":"Sevoflurane"},{"NDCCode":"83301-0070-1","ProprietaryName":"Sevoflurane, (volatile For Inhalation)","NonProprietaryName":"Sevoflurane"},{"NDCCode":"11822-0012-8","ProprietaryName":"Junior Pain Relief","NonProprietaryName":"Acetaminophen"},{"NDCCode":"11822-0017-8","ProprietaryName":"Stool Softener Laxative","NonProprietaryName":"Docusate Sodium"},{"NDCCode":"11822-0110-8","ProprietaryName":"Peptic Relief","NonProprietaryName":"Bismuth Subsalicylate"},{"NDCCode":"11822-0112-8","ProprietaryName":"Sinus Pressure And Congestion Relief","NonProprietaryName":"Pseudoephedrine Hcl"},{"NDCCode":"11822-0120-9","ProprietaryName":"Salicylic Acid","NonProprietaryName":"Corn And Callus Remover Liquid"},{"NDCCode":"11822-0123-8","ProprietaryName":"Salicylic Acid","NonProprietaryName":"Ultra Thin Corn Removers"},{"NDCCode":"11822-0150-1","ProprietaryName":"Cold And Flu Relief","NonProprietaryName":"Acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl"}]}
                    

<NDCList><NDC><NDCCode>11822-1090-8</NDCCode><ProprietaryName>Daylogic Fresh Pear Foaming</ProprietaryName><NonProprietaryName>Benzalkonium Chloride</NonProprietaryName></NDC><NDC><NDCCode>11822-1090-7</NDCCode><ProprietaryName>Daylogic Fresh Pear Foaming</ProprietaryName><NonProprietaryName>Benzalkonium Chloride</NonProprietaryName></NDC><NDC><NDCCode>0074-4456-04</NDCCode><ProprietaryName>Ultane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>0074-4456-51</NDCCode><ProprietaryName>Ultane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>0527-6123-74</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>10019-651-64</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>10019-653-64</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>10019-655-06</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>10019-657-06</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>12164-005-25</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>42677-308-01</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>43742-1090-1</NDCCode><ProprietaryName>Trauma Relief</ProprietaryName><NonProprietaryName>Chamomilla, Echinacea (angustifolia), Hamamelis Virginiana, Hypericum Perforatum, Millefolium, Bryonia (alba), Calendula Officinalis, Arnica Montana, Bellis Perennis, Clematis Vitalba, Flos, Helianthemum Nummularium, Flos, Impatiens Glandulifera, Flos, Ornithogalum Umbellatum, Flos, Prunus Cerasifera, Flos, Symphytum Officinale, Rhus Tox, Hepar Sulphuris Calcareum, Carbo Vegetabilis</NonProprietaryName></NDC><NDC><NDCCode>58181-5200-1</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>64942-1090-1</NDCCode><ProprietaryName>Dove Ultimate Sensitive Care Fragrance Free</ProprietaryName><NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName></NDC><NDC><NDCCode>64942-1090-2</NDCCode><ProprietaryName>Dove Ultimate Sensitive Care Fragrance Free</ProprietaryName><NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName></NDC><NDC><NDCCode>66794-012-10</NDCCode><ProprietaryName>Sojourn</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>66794-012-25</NDCCode><ProprietaryName>Sojourn</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>66794-015-10</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>66794-015-25</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>66794-022-25</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>68599-1090-3</NDCCode><ProprietaryName>Mckesson Sugar Free Cough Suppressant Oral Anesthetic</ProprietaryName><NonProprietaryName>Menthol Lozenge</NonProprietaryName></NDC><NDC><NDCCode>72162-2245-2</NDCCode><ProprietaryName>Sevoflurane</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>83301-0070-1</NDCCode><ProprietaryName>Sevoflurane, (volatile For Inhalation)</ProprietaryName><NonProprietaryName>Sevoflurane</NonProprietaryName></NDC><NDC><NDCCode>11822-0012-8</NDCCode><ProprietaryName>Junior Pain Relief</ProprietaryName><NonProprietaryName>Acetaminophen</NonProprietaryName></NDC><NDC><NDCCode>11822-0017-8</NDCCode><ProprietaryName>Stool Softener Laxative</ProprietaryName><NonProprietaryName>Docusate Sodium</NonProprietaryName></NDC><NDC><NDCCode>11822-0110-8</NDCCode><ProprietaryName>Peptic Relief</ProprietaryName><NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName></NDC><NDC><NDCCode>11822-0112-8</NDCCode><ProprietaryName>Sinus Pressure And Congestion Relief</ProprietaryName><NonProprietaryName>Pseudoephedrine Hcl</NonProprietaryName></NDC><NDC><NDCCode>11822-0120-9</NDCCode><ProprietaryName>Salicylic Acid</ProprietaryName><NonProprietaryName>Corn And Callus Remover Liquid</NonProprietaryName></NDC><NDC><NDCCode>11822-0123-8</NDCCode><ProprietaryName>Salicylic Acid</ProprietaryName><NonProprietaryName>Ultra Thin Corn Removers</NonProprietaryName></NDC><NDC><NDCCode>11822-0150-1</NDCCode><ProprietaryName>Cold And Flu Relief</ProprietaryName><NonProprietaryName>Acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl</NonProprietaryName></NDC></NDCList>