RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>13533-690-27</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-690-27)  &gt; 500 mL in 1 VIAL (13533-690-28) </PackageDescription>
    <NDC11Code>13533-0690-27</NDC11Code>
    <ProductNDC>13533-690</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasbumin</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19940926</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19940926</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Plasbumin-5 is iso-oncotic with normal plasma and on intravenous infusion will expand the circulating blood volume by an amount approximately equal to the volume infused. In conditions associated mainly with a volume deficit, albumin is best administered as a 5% solution (Plasbumin-5); but where there is an oncotic deficit, Albumin (Human) 25%, USP (Plasbumin®-25) may be preferred. This is also an important consideration where the treatment of the shock state has been delayed. If Plasbumin-25 is used, appropriate additional crystalloid should be administered.(1). Crystalloid solutions in volumes several times greater than that of Plasbumin-5 may be effective in treating shock in younger individuals who have no preexisting illness at the time of the incident. Older patients, especially those with preexisting debilitating conditions, or those in whom the shock is caused by a medical disorder, or where the state of shock has existed for some time before active therapy could be instituted, may not tolerate hypoalbuminemia as well.(1). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of albumin infusion may be required to support the blood volume.(1). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours, albumin can be used to maintain plasma colloid osmotic pressure. Plasbumin-25 may be preferred for this purpose.(1). Cardiopulmonary Bypass(1). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure(1). In the uncommon situation of rapid loss of liver function, with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Sequestration of Protein Rich Fluids(2). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Situations in Which Albumin Administration is Not Warranted(1). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 5%, USP (Plasbumin®-5) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Plasbumin-5 is a 5% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.004 M sodium caprylate and 0.004 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Plasbumin-5 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Plasbumin-5 must be administered intravenously. Each vial of Plasbumin-5 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(8-11) The production steps from Pooled Plasma to Effluent IV-1 in the Plasbumin-5 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-613-27</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-613-27)  &gt; 500 mL in 1 VIAL (13533-613-28) </PackageDescription>
    <NDC11Code>13533-0613-27</NDC11Code>
    <ProductNDC>13533-613</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasmanate</ProprietaryName>
    <NonProprietaryName>Plasma Protein Fraction (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19581002</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101140</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19581002</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Treatment of Shock — Plasmanate is indicated in the treatment of shock due to burns, crushing injuries, abdominal emergencies, and any other cause where there is a predominant loss of plasma fluids and not red blood cells. It is also effective in the emergency treatment of shock due to hemorrhage.(3,4) Following the emergency phase of therapy, blood transfusions may be indicated depending on the severity of the blood loss. In infants and small children, Plasmanate has been found to be very useful in the initial therapy of shock due to dehydration and infection.</IndicationAndUsage>
    <Description>This product has been prepared from large pools of human plasma. Each 100 mL of Plasma Protein Fraction (Human) 5%, USP—Plasmanate® contains 5 g selected plasma proteins buffered with sodium carbonate and stabilized with 0.004 M sodium caprylate and 0.004 M acetyltryptophan. The plasma proteins consist of approximately 88% normal human albumin, 12% alpha and beta globulins and not more than 1% gamma globulin as determined by electrophoresis.(1) The concentration of these proteins is such that this solution is iso-oncotic with normal human plasma and is isotonic. The approximate concentrations of the significant electrolytes in Plasmanate are: sodium 145 mEq/L, potassium 0.25 mEq/L, and chloride 100 mEq/L. Plasmanate is clear and amber colored. Plasmanate must be administered intravenously. This product is designed to bring to the medical profession a preparation derived from human blood and similar to human plasma. Each vial of Plasmanate is sterile and heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. The blood group agglutinins and agglutinogens A and B are at such a low level in Plasmanate solution that its use has no effect on routine blood typing procedures. No chemical or microscopic alterations of the urine have been observed with its use. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. (5-8) The production steps from Pooled Plasma to Effluent IV-1 in the Plasmanate manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-685-27</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-685-27)  &gt; 500 mL in 1 VIAL (13533-685-28) </PackageDescription>
    <NDC11Code>13533-0685-27</NDC11Code>
    <ProductNDC>13533-685</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasbumin</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19760826</StartMarketingDate>
    <EndMarketingDate>20181108</EndMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC],Increased Intravascular Volume [PE],Increased Oncotic Pressure [PE],Osmotic Activity [MoA],Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-11-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>19760826</StartMarketingDatePackage>
    <EndMarketingDatePackage>20181108</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>13533-690-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-690-20)  &gt; 50 mL in 1 VIAL (13533-690-21) </PackageDescription>
    <NDC11Code>13533-0690-20</NDC11Code>
    <ProductNDC>13533-690</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasbumin</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19940926</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19940926</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Plasbumin-5 is iso-oncotic with normal plasma and on intravenous infusion will expand the circulating blood volume by an amount approximately equal to the volume infused. In conditions associated mainly with a volume deficit, albumin is best administered as a 5% solution (Plasbumin-5); but where there is an oncotic deficit, Albumin (Human) 25%, USP (Plasbumin®-25) may be preferred. This is also an important consideration where the treatment of the shock state has been delayed. If Plasbumin-25 is used, appropriate additional crystalloid should be administered.(1). Crystalloid solutions in volumes several times greater than that of Plasbumin-5 may be effective in treating shock in younger individuals who have no preexisting illness at the time of the incident. Older patients, especially those with preexisting debilitating conditions, or those in whom the shock is caused by a medical disorder, or where the state of shock has existed for some time before active therapy could be instituted, may not tolerate hypoalbuminemia as well.(1). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of albumin infusion may be required to support the blood volume.(1). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours, albumin can be used to maintain plasma colloid osmotic pressure. Plasbumin-25 may be preferred for this purpose.(1). Cardiopulmonary Bypass(1). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure(1). In the uncommon situation of rapid loss of liver function, with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Sequestration of Protein Rich Fluids(2). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Situations in Which Albumin Administration is Not Warranted(1). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 5%, USP (Plasbumin®-5) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Plasbumin-5 is a 5% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.004 M sodium caprylate and 0.004 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Plasbumin-5 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Plasbumin-5 must be administered intravenously. Each vial of Plasbumin-5 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(8-11) The production steps from Pooled Plasma to Effluent IV-1 in the Plasbumin-5 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-690-25</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-690-25)  &gt; 250 mL in 1 VIAL (13533-690-26) </PackageDescription>
    <NDC11Code>13533-0690-25</NDC11Code>
    <ProductNDC>13533-690</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasbumin</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19940926</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19940926</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Plasbumin-5 is iso-oncotic with normal plasma and on intravenous infusion will expand the circulating blood volume by an amount approximately equal to the volume infused. In conditions associated mainly with a volume deficit, albumin is best administered as a 5% solution (Plasbumin-5); but where there is an oncotic deficit, Albumin (Human) 25%, USP (Plasbumin®-25) may be preferred. This is also an important consideration where the treatment of the shock state has been delayed. If Plasbumin-25 is used, appropriate additional crystalloid should be administered.(1). Crystalloid solutions in volumes several times greater than that of Plasbumin-5 may be effective in treating shock in younger individuals who have no preexisting illness at the time of the incident. Older patients, especially those with preexisting debilitating conditions, or those in whom the shock is caused by a medical disorder, or where the state of shock has existed for some time before active therapy could be instituted, may not tolerate hypoalbuminemia as well.(1). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of albumin infusion may be required to support the blood volume.(1). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours, albumin can be used to maintain plasma colloid osmotic pressure. Plasbumin-25 may be preferred for this purpose.(1). Cardiopulmonary Bypass(1). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure(1). In the uncommon situation of rapid loss of liver function, with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Sequestration of Protein Rich Fluids(2). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Situations in Which Albumin Administration is Not Warranted(1). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 5%, USP (Plasbumin®-5) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Plasbumin-5 is a 5% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.004 M sodium caprylate and 0.004 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Plasbumin-5 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Plasbumin-5 must be administered intravenously. Each vial of Plasbumin-5 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(8-11) The production steps from Pooled Plasma to Effluent IV-1 in the Plasbumin-5 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>42507-690-10</NDCCode>
    <PackageDescription>4 BOTTLE in 1 CARTON (42507-690-10)  / 27 LOZENGE in 1 BOTTLE (42507-690-09) </PackageDescription>
    <NDC11Code>42507-0690-10</NDC11Code>
    <ProductNDC>42507-690</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nicotine</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
    <DosageFormName>LOZENGE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260318</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077007</ApplicationNumber>
    <LabelerName>HyVee Inc</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260318</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>72288-690-21</NDCCode>
    <PackageDescription>8 CONTAINER in 1 CONTAINER (72288-690-21)  / 27 LOZENGE in 1 CONTAINER</PackageDescription>
    <NDC11Code>72288-0690-21</NDC11Code>
    <ProductNDC>72288-690</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Amazon Basic Care Nicotine Polacrilex</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex Mini</NonProprietaryName>
    <DosageFormName>LOZENGE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215357</ApplicationNumber>
    <LabelerName>Amazon.com Services LLC</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>72288-690-83</NDCCode>
    <PackageDescription>1 CONTAINER in 1 CARTON (72288-690-83)  / 27 LOZENGE in 1 CONTAINER</PackageDescription>
    <NDC11Code>72288-0690-83</NDC11Code>
    <ProductNDC>72288-690</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Amazon Basic Care Nicotine Polacrilex</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex Mini</NonProprietaryName>
    <DosageFormName>LOZENGE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215357</ApplicationNumber>
    <LabelerName>Amazon.com Services LLC</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>72288-690-85</NDCCode>
    <PackageDescription>5 CONTAINER in 1 CARTON (72288-690-85)  / 27 LOZENGE in 1 CONTAINER</PackageDescription>
    <NDC11Code>72288-0690-85</NDC11Code>
    <ProductNDC>72288-690</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Amazon Basic Care Nicotine Polacrilex</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex Mini</NonProprietaryName>
    <DosageFormName>LOZENGE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215357</ApplicationNumber>
    <LabelerName>Amazon.com Services LLC</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>13533-502-01</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (13533-502-01)  *  50 mL in 1 VIAL, GLASS (13533-503-02)  *  50 mL in 1 VIAL, GLASS (13533-200-50) </PackageDescription>
    <NDC11Code>13533-0502-01</NDC11Code>
    <ProductNDC>13533-502</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Fesilty</ProprietaryName>
    <NonProprietaryName>Fibrinogen, Human-chmt</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20251216</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125833</ApplicationNumber>
    <LabelerName>Grifols USA LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FESILTY is indicated for the treatment of acute bleeding episodes in pediatric and adult patients with congenital fibrinogen deficiency, including hypo- or afibrinogenemia.Limitations of Use: FESILTY is not indicated for dysfibrinogenemia.</IndicationAndUsage>
    <Description>FESILTY (fibrinogen, human – chmt), is a purified, sterile, non-pyrogenic, lyophilized powder of human fibrinogen for reconstitution for intravenous administration. Human fibrinogen is purified from Source Plasma from the cryoprecipitate fraction and processed using a combination of aluminum hydroxide purification, solvent/detergent (S/D) treatment, anion and cation exchange chromatography, glycine precipitation, and Ultraviolet (UV)-C irradiation. FESILTY is supplied in a single-dose vial containing nominally 1 gram of fibrinogen. The actual amount of fibrinogen is printed on the vial label and carton in milligrams fibrinogen per vial. When reconstituted with 50 mL sterile water for injection, FESILTY contains approximately 20 mg/mL protein, of which not less than 80% is fibrinogen monomer. Each vial of FESILTY also contains 421.3 mg arginine hydrochloride, 292.2 mg sodium chloride, 73.5 mg sodium citrate dihydrate, 25.5 mg polysorbate 80, and 567.5 mg trehalose dihydrate. FESILTY has a pH of 6.5 to 7.5 and an osmolality of ≥ 240 mOsmol/kg. FESILTY does not contain preservatives and is not made with natural rubber latex.FESILTY is prepared from pooled Source Plasma obtained from healthy volunteer donors. Each plasma donation used for the manufacture of FESILTY is collected from FDA-licensed facilities. Plasma donations must test negative for hepatitis B virus (HBV) surface antigen (HBsAg), antibodies to human immunodeficiency virus (HIV) strains 1 and 2 (anti-HIV-1/2), and antibodies to the hepatitis C virus (anti-HCV) as determined by enzyme immunoassay (EIA). In addition, samples from manufacturing pools must test non-reactive for HIV RNA, HCV RNA, HBV DNA, and Hepatitis A Virus (HAV) RNA, by Nucleic Acid Amplification Testing (NAT). Parvovirus B19 (B19V) DNA is also tested by NAT and must not exceed 104 IU/mL in the manufacturing pool.The manufacturing process for FESILTY employs several steps to remove/inactivate adventitious viruses to further increase the margins of safety. These steps include S/D treatment, UV-C irradiation, and heat treatment of lyophilized fibrinogen. Virus clearance studies with a scaled-down process have been performed for these steps to determine their capacity to inactivate or remove both enveloped and non-enveloped viruses. The results are shown in Table 3. The manufacturing process was also investigated for its capacity to reduce the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for CJD and its variant, vCJD. One chromatographic purification step has been shown to reduce TSE infectivity of an experimental model agent. These studies provide reasonable assurance that low levels (at least 3.27 log10) of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-618-02</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-618-02)  &gt; 2 mL in 1 VIAL, GLASS (13533-618-20) </PackageDescription>
    <NDC11Code>13533-0618-02</NDC11Code>
    <ProductNDC>13533-618</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperrab</ProprietaryName>
    <ProprietaryNameSuffix>S/d</ProprietaryNameSuffix>
    <NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19960814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101144</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2022-11-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19960814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rabies vaccine and HyperRAB S/D should be given to all persons suspected of exposure to rabies with one exception: persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine. HyperRAB S/D should be administered as promptly as possible after exposure, but can be administered up to the eighth day after the first dose of vaccine is given. Recommendations for use of passive and active immunization after exposure to an animal suspected of having rabies have been detailed by the U.S. Public Health Service Advisory Committee on Immunization Practices (ACIP). [19]. Every exposure to possible rabies infection must be individually evaluated. The following factors should be considered before specific antirabies treatment is initiated.</IndicationAndUsage>
    <Description>Rabies Immune Globulin (Human) — HyperRAB® S/D treated with solvent/detergent is a colorless to pale yellow or pink sterile solution of antirabies immune globulin for intramuscular administration; it is preservative-free and latex-free. HyperRAB S/D is prepared by cold ethanol fractionation from the plasma of donors hyperimmunized with rabies vaccine. The immune globulin is isolated from solubilized Cohn Fraction II. The Fraction II solution is adjusted to a final concentration of 0.3% tri-n-butyl phosphate (TNBP) and 0.2% sodium cholate. After the addition of solvent (TNBP) and detergent (sodium cholate), the solution is heated to 30°C and maintained at that temperature for not less than 6 hours. After the viral inactivation step, the reactants are removed by precipitation, filtration and finally ultrafiltration and diafiltration. HyperRAB S/D is formulated as a 15–18% protein solution at a pH of 6.4–7.2 in 0.21–0.32 M glycine. HyperRAB S/D is then incubated in the final container for 21–28 days at 20–27°C. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain an average potency value of 150 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. The removal and inactivation of spiked model enveloped and non-enveloped viruses during the manufacturing process for HyperRAB S/D has been validated in laboratory studies. Human Immunodeficiency Virus, Type 1 (HIV-1), was chosen as the relevant virus for blood products; Bovine Viral Diarrhea Virus (BVDV) was chosen to model Hepatitis C virus; Pseudorabies virus (PRV) was chosen to model Human Herpes viruses and other large enveloped DNA viruses; and Reo virus type 3 (Reo) was chosen to model non-enveloped viruses and for its resistance to physical and chemical inactivation. Significant removal of model enveloped and non-enveloped viruses is achieved at two steps in the Cohn fractionation process leading to the collection of Cohn Fraction II: the precipitation and removal of Fraction III in the processing of Fraction II + IIIW suspension to Effluent III and the filtration step in the processing of Effluent III to Filtrate III. Significant inactivation of enveloped viruses is achieved at the time of treatment of solubilized Cohn Fraction II with TNBP/sodium cholate. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [27-30]. Studies of the HyperRAB S/D manufacturing process demonstrate that TSE clearance is achieved during the Pooled Plasma to Effluent III Fractionation Process (6.7 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-618-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-618-10)  &gt; 10 mL in 1 VIAL (13533-618-11) </PackageDescription>
    <NDC11Code>13533-0618-10</NDC11Code>
    <ProductNDC>13533-618</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperrab</ProprietaryName>
    <ProprietaryNameSuffix>S/d</ProprietaryNameSuffix>
    <NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19960814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101144</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2022-11-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19960814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rabies vaccine and HyperRAB S/D should be given to all persons suspected of exposure to rabies with one exception: persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine. HyperRAB S/D should be administered as promptly as possible after exposure, but can be administered up to the eighth day after the first dose of vaccine is given. Recommendations for use of passive and active immunization after exposure to an animal suspected of having rabies have been detailed by the U.S. Public Health Service Advisory Committee on Immunization Practices (ACIP). [19]. Every exposure to possible rabies infection must be individually evaluated. The following factors should be considered before specific antirabies treatment is initiated.</IndicationAndUsage>
    <Description>Rabies Immune Globulin (Human) — HyperRAB® S/D treated with solvent/detergent is a colorless to pale yellow or pink sterile solution of antirabies immune globulin for intramuscular administration; it is preservative-free and latex-free. HyperRAB S/D is prepared by cold ethanol fractionation from the plasma of donors hyperimmunized with rabies vaccine. The immune globulin is isolated from solubilized Cohn Fraction II. The Fraction II solution is adjusted to a final concentration of 0.3% tri-n-butyl phosphate (TNBP) and 0.2% sodium cholate. After the addition of solvent (TNBP) and detergent (sodium cholate), the solution is heated to 30°C and maintained at that temperature for not less than 6 hours. After the viral inactivation step, the reactants are removed by precipitation, filtration and finally ultrafiltration and diafiltration. HyperRAB S/D is formulated as a 15–18% protein solution at a pH of 6.4–7.2 in 0.21–0.32 M glycine. HyperRAB S/D is then incubated in the final container for 21–28 days at 20–27°C. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain an average potency value of 150 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. The removal and inactivation of spiked model enveloped and non-enveloped viruses during the manufacturing process for HyperRAB S/D has been validated in laboratory studies. Human Immunodeficiency Virus, Type 1 (HIV-1), was chosen as the relevant virus for blood products; Bovine Viral Diarrhea Virus (BVDV) was chosen to model Hepatitis C virus; Pseudorabies virus (PRV) was chosen to model Human Herpes viruses and other large enveloped DNA viruses; and Reo virus type 3 (Reo) was chosen to model non-enveloped viruses and for its resistance to physical and chemical inactivation. Significant removal of model enveloped and non-enveloped viruses is achieved at two steps in the Cohn fractionation process leading to the collection of Cohn Fraction II: the precipitation and removal of Fraction III in the processing of Fraction II + IIIW suspension to Effluent III and the filtration step in the processing of Effluent III to Filtrate III. Significant inactivation of enveloped viruses is achieved at the time of treatment of solubilized Cohn Fraction II with TNBP/sodium cholate. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [27-30]. Studies of the HyperRAB S/D manufacturing process demonstrate that TSE clearance is achieved during the Pooled Plasma to Effluent III Fractionation Process (6.7 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>11928-003-06</NDCCode>
    <PackageDescription>690 mL in 1 CANISTER (11928-003-06)</PackageDescription>
    <NDC11Code>11928-0003-06</NDC11Code>
    <ProductNDC>11928-003</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mada Hand Sanitizing Wipes</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20100405</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333</ApplicationNumber>
    <LabelerName>Mada Medical Products, Inc.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>65</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2015-11-27</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>16714-690-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (16714-690-10)  / 100 mL in 1 VIAL (16714-690-01) </PackageDescription>
    <NDC11Code>16714-0690-10</NDC11Code>
    <ProductNDC>16714-690</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propofol</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206408</ApplicationNumber>
    <LabelerName>NorthStar Rx LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white  homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion, USP contains 10 mg of propofol USP, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion, USP is isotonic and has a pH of 6.0 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>49644-001-01</NDCCode>
    <PackageDescription>690 L in 1 CYLINDER (49644-001-01) </PackageDescription>
    <NDC11Code>49644-0001-01</NDC11Code>
    <ProductNDC>49644-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxygen</ProprietaryName>
    <NonProprietaryName>Oxygen</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19700101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA206023</ApplicationNumber>
    <LabelerName>Terry Supply Company Inc</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>997</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-10-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19700101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>50090-7769-0</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (50090-7769-0)  / 1 mL in 1 TRAY</PackageDescription>
    <NDC11Code>50090-7769-00</NDC11Code>
    <ProductNDC>50090-7769</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Selarsdi</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>USTEKINUMAB</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SELARSDI is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis, who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. SELARSDI (ustekinumab-aekn) injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. SELARSDI for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). SELARSDI for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51407-929-11</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (51407-929-11)  / 1 SYRINGE in 1 BLISTER PACK / .5 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>51407-0929-11</NDC11Code>
    <ProductNDC>51407-929</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Imuldosa</ProprietaryName>
    <NonProprietaryName>Ustekinumab-srlf</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241010</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761364</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-SRLF</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IMULDOSA is a human interleukin-12 and -23 antagonist indicated for the treatment of: Adult patients with:  moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2)  moderately to severely active Crohn’s disease (CD). ( 1.3)  moderately to severely active ulcerative colitis. ( 1.4) Pediatric patients 6 years and older with:  moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2).</IndicationAndUsage>
    <Description>Ustekinumab-srlf, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-srlf is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-srlf is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. IMULDOSA (ustekinumab-srlf) injection is a sterile, preservative-free, clear to slightly opalescent and colorless to slightly yellow solution with pH of 5.7- 6.3. IMULDOSA for Subcutaneous Use Available as 45 mg of ustekinumab-srlf in 0.5 mL and 90 mg of ustekinumab-srlf in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed ½ inch needle. The syringe is fitted with a passive needle guard and a needle cover that does not contains latex. Each 0.5 mL prefilled syringe delivers 45 mg ustekinumab-srlf, histidine (2.23 mg) and L-histidine hydrochloride monohydrate (4.14 mg), polysorbate 80 (0.02 mg), and sucrose (25.9 mg). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-srlf, histidine (4.46 mg) and L-histidine hydrochloride monohydrate (8.28 mg), polysorbate 80 (0.04 mg), and sucrose (51.8 mg). IMULDOSA for Intravenous Infusion Available as 130 mg of ustekinumab-srlf in 26 mL, supplied as a single-dose 30 mL Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-srlf, edetate disodium (0.52 mg), histidine (20 mg), L-histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), Polysorbate 80 (10.4 mg) and sucrose (2,210 mg).</Description>
  </NDC>
  <NDC>
    <NDCCode>51407-930-11</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (51407-930-11)  / 1 SYRINGE in 1 BLISTER PACK / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>51407-0930-11</NDC11Code>
    <ProductNDC>51407-930</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Imuldosa</ProprietaryName>
    <NonProprietaryName>Ustekinumab-srlf</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241010</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761364</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-SRLF</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IMULDOSA is a human interleukin-12 and -23 antagonist indicated for the treatment of: Adult patients with:  moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2)  moderately to severely active Crohn’s disease (CD). ( 1.3)  moderately to severely active ulcerative colitis. ( 1.4) Pediatric patients 6 years and older with:  moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2).</IndicationAndUsage>
    <Description>Ustekinumab-srlf, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-srlf is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-srlf is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. IMULDOSA (ustekinumab-srlf) injection is a sterile, preservative-free, clear to slightly opalescent and colorless to slightly yellow solution with pH of 5.7- 6.3. IMULDOSA for Subcutaneous Use Available as 45 mg of ustekinumab-srlf in 0.5 mL and 90 mg of ustekinumab-srlf in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed ½ inch needle. The syringe is fitted with a passive needle guard and a needle cover that does not contains latex. Each 0.5 mL prefilled syringe delivers 45 mg ustekinumab-srlf, histidine (2.23 mg) and L-histidine hydrochloride monohydrate (4.14 mg), polysorbate 80 (0.02 mg), and sucrose (25.9 mg). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-srlf, histidine (4.46 mg) and L-histidine hydrochloride monohydrate (8.28 mg), polysorbate 80 (0.04 mg), and sucrose (51.8 mg). IMULDOSA for Intravenous Infusion Available as 130 mg of ustekinumab-srlf in 26 mL, supplied as a single-dose 30 mL Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-srlf, edetate disodium (0.52 mg), histidine (20 mg), L-histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), Polysorbate 80 (10.4 mg) and sucrose (2,210 mg).</Description>
  </NDC>
  <NDC>
    <NDCCode>51407-931-11</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (51407-931-11)  / 26 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>51407-0931-11</NDC11Code>
    <ProductNDC>51407-931</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Imuldosa</ProprietaryName>
    <NonProprietaryName>Ustekinumab-srlf</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241010</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761364</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-SRLF</SubstanceName>
    <StrengthNumber>130</StrengthNumber>
    <StrengthUnit>mg/26mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IMULDOSA is a human interleukin-12 and -23 antagonist indicated for the treatment of: Adult patients with:  moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2)  moderately to severely active Crohn’s disease (CD). ( 1.3)  moderately to severely active ulcerative colitis. ( 1.4) Pediatric patients 6 years and older with:  moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. ( 1.1)  active psoriatic arthritis (PsA). ( 1.2).</IndicationAndUsage>
    <Description>Ustekinumab-srlf, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-srlf is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-srlf is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. IMULDOSA (ustekinumab-srlf) injection is a sterile, preservative-free, clear to slightly opalescent and colorless to slightly yellow solution with pH of 5.7- 6.3. IMULDOSA for Subcutaneous Use Available as 45 mg of ustekinumab-srlf in 0.5 mL and 90 mg of ustekinumab-srlf in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed ½ inch needle. The syringe is fitted with a passive needle guard and a needle cover that does not contains latex. Each 0.5 mL prefilled syringe delivers 45 mg ustekinumab-srlf, histidine (2.23 mg) and L-histidine hydrochloride monohydrate (4.14 mg), polysorbate 80 (0.02 mg), and sucrose (25.9 mg). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-srlf, histidine (4.46 mg) and L-histidine hydrochloride monohydrate (8.28 mg), polysorbate 80 (0.04 mg), and sucrose (51.8 mg). IMULDOSA for Intravenous Infusion Available as 130 mg of ustekinumab-srlf in 26 mL, supplied as a single-dose 30 mL Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-srlf, edetate disodium (0.52 mg), histidine (20 mg), L-histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), Polysorbate 80 (10.4 mg) and sucrose (2,210 mg).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-413-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-413-32)  / 1 SYRINGE, GLASS in 1 TRAY / .5 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0413-32</NDC11Code>
    <ProductNDC>51759-413</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ustekinumab-aekn</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20251223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ustekinumab-aekn is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. Ustekinumab-aekn injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. Ustekinumab-aekn for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). Ustekinumab-aekn for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-414-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-414-32)  / 1 SYRINGE, GLASS in 1 TRAY / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0414-32</NDC11Code>
    <ProductNDC>51759-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ustekinumab-aekn</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20251223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ustekinumab-aekn is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. Ustekinumab-aekn injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. Ustekinumab-aekn for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). Ustekinumab-aekn for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-505-13</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (51759-505-13)  / .5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>51759-0505-13</NDC11Code>
    <ProductNDC>51759-505</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Selarsdi</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251016</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SELARSDI is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. SELARSDI (ustekinumab-aekn) injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. SELARSDI for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). SELARSDI for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-505-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-505-32)  / 1 SYRINGE, GLASS in 1 TRAY / .5 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0505-32</NDC11Code>
    <ProductNDC>51759-505</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Selarsdi</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SELARSDI is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. SELARSDI (ustekinumab-aekn) injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. SELARSDI for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). SELARSDI for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-607-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-607-32)  / 1 SYRINGE, GLASS in 1 TRAY / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0607-32</NDC11Code>
    <ProductNDC>51759-607</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Selarsdi</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SELARSDI is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. SELARSDI (ustekinumab-aekn) injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. SELARSDI for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). SELARSDI for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-708-13</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (51759-708-13)  / 26 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>51759-0708-13</NDC11Code>
    <ProductNDC>51759-708</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Selarsdi</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>130</StrengthNumber>
    <StrengthUnit>mg/26mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SELARSDI is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. SELARSDI (ustekinumab-aekn) injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. SELARSDI for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). SELARSDI for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-709-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-709-32)  / 1 SYRINGE, GLASS in 1 TRAY / .5 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0709-32</NDC11Code>
    <ProductNDC>51759-709</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ustekinumab-aekn</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250602</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ustekinumab-aekn is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. Ustekinumab-aekn injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. Ustekinumab-aekn for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). Ustekinumab-aekn for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-710-32</NDCCode>
    <PackageDescription>1 TRAY in 1 CARTON (51759-710-32)  / 1 SYRINGE, GLASS in 1 TRAY / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0710-32</NDC11Code>
    <ProductNDC>51759-710</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ustekinumab-aekn</ProprietaryName>
    <NonProprietaryName>Ustekinumab-aekn</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250602</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761343</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>USTEKINUMAB-AEKN</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ustekinumab-aekn is a human interleukin-12 and -23 antagonist indicated for the treatment of. Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn’s disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4) Pediatric patients 6 years and older with:, 5 moderate to severe plaque psoriasis (PsO), who are candidates for phototherapy or systemic therapy. (1.1), 6 active psoriatic arthritis (PsA). (1.2).</IndicationAndUsage>
    <Description>Ustekinumab-aekn, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aekn is produced in a murine cell line (Sp2/0). The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aekn is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. Ustekinumab-aekn injection is a sterile, preservative-free, clear and colorless to slightly yellow solution free of visible particles with pH of 5.7 to 6.3. Ustekinumab-aekn for Subcutaneous Use. Available as 45 mg of ustekinumab-aekn in 0.5 mL and 90 mg of ustekinumab-aekn in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29-gauge fixed 1/2 inch needle and as 45 mg of ustekinumab-aekn in 0.5 mL in a single-dose borosilicate Type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aekn, histidine (0.122 mg), L-histidine monohydrochloride monohydrate (0.507 mg), polysorbate 80 (0.02 mg), sucrose (38 mg) and water for injection (q.s). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aekn, histidine (0.243 mg), L-histidine monohydrochloride monohydrate (1.013 mg), polysorbate 80 (0.04 mg), sucrose (76 mg) and water for injection (q.s). Ustekinumab-aekn for Intravenous Infusion.  Available as 130 mg of ustekinumab-aekn in 26 mL, supplied as a single-dose borosilicate type I glass vial with a rubber stopper. Not made with natural rubber latex. Each 26 mL vial delivers 130 mg ustekinumab-aekn, edetate disodium (0.47 mg), histidine (20.02 mg), L- histidine monohydrochloride monohydrate (27.04 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg), sucrose (2,210 mg), and water for injection (q.s).</Description>
  </NDC>
  <NDC>
    <NDCCode>53452-001-02</NDCCode>
    <PackageDescription>690 L in 1 CYLINDER (53452-001-02) </PackageDescription>
    <NDC11Code>53452-0001-02</NDC11Code>
    <ProductNDC>53452-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxygen</ProprietaryName>
    <NonProprietaryName>Oxygen</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19630101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205767</ApplicationNumber>
    <LabelerName>Dale Oxygen And Acetylene Service, Inc</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>990</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19630101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>55315-690-01</NDCCode>
    <PackageDescription>1 BOTTLE in 1 BOX (55315-690-01)  &gt; 100 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>55315-0690-01</NDC11Code>
    <ProductNDC>55315-690</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Allergy Relief</ProprietaryName>
    <ProprietaryNameSuffix>Antihistamine</ProprietaryNameSuffix>
    <NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100722</StartMarketingDate>
    <EndMarketingDate>20240126</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part336</ApplicationNumber>
    <LabelerName>Freds Inc</LabelerName>
    <SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20100722</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240126</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose , 2 sneezing , 3 itchy, watery eyes, 4 itching nose or throat .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>57664-690-88</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (57664-690-88) </PackageDescription>
    <NDC11Code>57664-0690-88</NDC11Code>
    <ProductNDC>57664-690</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19870714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089399</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19870714</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
    <Description>Amitriptyline HCl is 3-(10,11-dihydro-5 H-dibenzo [ a,d] cycloheptene-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride. Its molecular formula is C 20H 23N ∙ HCl and its structural formula is:. Amitriptyline HCl, a dibenzocycloheptadiene derivative, has a molecular weight of 313.87. It is a white, odorless, crystalline compound which is freely soluble in water. Each tablet, for oral administration, contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg or 150 mg of amitriptyline hydrochloride. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc, polyethylene glycol, and titanium dioxide; 10 mg contains D&amp;C Red No. 27 Aluminum Lake, FD&amp;C Yellow No. 6 Aluminum Lake, and FD&amp;C Blue No. 1 Aluminum Lake; 25 mg contains D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1 Aluminum Lake, and FD&amp;C Red No. 40 Aluminum Lake; 50 mg contains FD&amp;C Yellow No. 5 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake, and FD&amp;C Red No. 40 Aluminum Lake; 75 mg contains D&amp;C Red No. 7 Lake, and FD&amp;C Blue No. 1 Aluminum Lake; 100 mg and 150 mg contain D&amp;C Red No. 30 Lake, and D&amp;C Yellow No. 10 Aluminum Lake.</Description>
  </NDC>
</NDCList>