RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>13533-810-05</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-810-05)  / 5 mL in 1 VIAL (13533-810-06) </PackageDescription>
    <NDC11Code>13533-0810-05</NDC11Code>
    <ProductNDC>13533-810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Xembify</ProprietaryName>
    <NonProprietaryName>Immune Globulin Subcutaneous, Human-klhw</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190703</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125683</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190703</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.</IndicationAndUsage>
    <Description>XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow.  The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-810-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-810-10)  / 10 mL in 1 VIAL (13533-810-11) </PackageDescription>
    <NDC11Code>13533-0810-10</NDC11Code>
    <ProductNDC>13533-810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Xembify</ProprietaryName>
    <NonProprietaryName>Immune Globulin Subcutaneous, Human-klhw</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190703</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125683</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190703</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.</IndicationAndUsage>
    <Description>XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow.  The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-810-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-810-20)  / 20 mL in 1 VIAL (13533-810-21) </PackageDescription>
    <NDC11Code>13533-0810-20</NDC11Code>
    <ProductNDC>13533-810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Xembify</ProprietaryName>
    <NonProprietaryName>Immune Globulin Subcutaneous, Human-klhw</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190703</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125683</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190703</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.</IndicationAndUsage>
    <Description>XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow.  The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-810-50</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-810-50)  / 50 mL in 1 VIAL (13533-810-51) </PackageDescription>
    <NDC11Code>13533-0810-50</NDC11Code>
    <ProductNDC>13533-810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Xembify</ProprietaryName>
    <NonProprietaryName>Immune Globulin Subcutaneous, Human-klhw</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190703</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125683</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190703</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.</IndicationAndUsage>
    <Description>XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow.  The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-318-05</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-318-05)  / 5 mL in 1 VIAL (13533-318-50) </PackageDescription>
    <NDC11Code>13533-0318-05</NDC11Code>
    <ProductNDC>13533-318</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperrab</ProprietaryName>
    <NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19740612</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101144</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740612</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.</IndicationAndUsage>
    <Description>HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative.  HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-603-20</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (13533-603-20)  *  10 mL in 1 VIAL, GLASS (13533-605-21)  *  10 mL in 1 VIAL, GLASS (13533-000-05) </PackageDescription>
    <NDC11Code>13533-0603-20</NDC11Code>
    <ProductNDC>13533-603</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Thrombate Iii</ProprietaryName>
    <NonProprietaryName>Antithrombin Iii (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19911230</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103196</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19911230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>THROMBATE III is indicated in adult and pediatric patients with hereditary antithrombin deficiency for: 1 Treatment and prevention of thromboembolism, 2 Prevention of peri-operative and peri-partum thromboembolism.</IndicationAndUsage>
    <Description>THROMBATE III, antithrombin III (human), is a sterile, non-pyrogenic concentrate of human antithrombin (AT) in lyophilized powder form for reconstitution for intravenous injection. When reconstituted with Sterile Water for Injection, USP, THROMBATE III has a pH of 6.0 to 7.5 and contains 110 mEq/L to 210 mEq/L sodium, 110 mEq/L to 210 mEq/L chloride, 0.075 M to 0.125 M alanine, and not more than 0.1 unit of heparin per 1 unit of AT. THROMBATE III contains no preservative. THROMBATE III is prepared from pooled units of human plasma from normal donors. The capacity of the THROMBATE III manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model using a wide range of viruses with diverse physicochemical properties. There are two dedicated virus inactivation/removal steps included in the THROMBATE III manufacturing process: a heat treatment step at 60°C ± 0.5°C for not less than 10 hours for virus inactivation and a nanofiltration step for effective removal of viruses as small as 18 nm. The THROMBATE III manufacturing process was also investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. An individual production step in the THROMBATE III manufacturing process has been shown to decrease TSE infectivity of that experimental model agent. The TSE reduction step is the Effluent I to Effluent II + III fractionation step (6.0 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-636-05</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-636-05)  / 5 mL in 1 VIAL, GLASS (13533-636-50) </PackageDescription>
    <NDC11Code>13533-0636-05</NDC11Code>
    <ProductNDC>13533-636</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperhep B</ProprietaryName>
    <NonProprietaryName>Hepatitis B Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19961009</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101146</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Recommendations on post-exposure prophylaxis are based on available efficacy data and on the likelihood of future HBV exposure for the person requiring treatment. In all exposures, a regimen combining Hepatitis B Immune Globulin (Human) with hepatitis B vaccine will provide both short- and long-term protection, will be less costly than the two-dose Hepatitis B Immune Globulin (Human) treatment alone, and is the treatment of choice.(9). HyperHEP B is indicated for post-exposure prophylaxis in the following situations.</IndicationAndUsage>
    <Description>Hepatitis B Immune Globulin (Human) — HyperHEP B® is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human hepatitis B immune globulin for intramuscular administration. HyperHEP B contains no preservative. HyperHEP B is prepared from pools of human plasma collected from healthy donors by a combination of  cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion exchange chromatography, nanofiltration and low pH incubation. HyperHEP B consists of a 15% to 18% protein solution at a pH of 4.1 to 4.8 in 0.16 M to 0.26 M glycine. The product contains anti-HBs antibody equivalent to or exceeding the potency of anti-HBs in a U.S. reference hepatitis B immune globulin (Center for Biologics Evaluation and Research, FDA). The U.S. reference has been tested against the World Health Organization standard Hepatitis B Immune Globulin and found to be equal to 220 international units (IU) per mL. When medicinal biological products are administered, the risk of infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products  prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogen. In the manufacturing process of HyperHEP B, there are several steps with the capacity for viral inactivation or removal.(1) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-253-25</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-253-25)  *  5 mL in 1 VIAL, GLASS (76125-252-21)  *  5 mL in 1 VIAL, GLASS (13533-200-05) </PackageDescription>
    <NDC11Code>76125-0253-25</NDC11Code>
    <ProductNDC>76125-253</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-257-25</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-257-25)  *  5 mL in 1 VIAL, GLASS (13533-200-05)  *  5 mL in 1 VIAL, GLASS (76125-252-21) </PackageDescription>
    <NDC11Code>76125-0257-25</NDC11Code>
    <ProductNDC>76125-257</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-662-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-662-50)  *  5 mL in 1 VIAL, GLASS (76125-669-31)  *  5 mL in 1 VIAL, GLASS (13533-200-05) </PackageDescription>
    <NDC11Code>76125-0662-50</NDC11Code>
    <ProductNDC>76125-662</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-663-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-663-50)  *  5 mL in 1 VIAL, GLASS (76125-669-31)  *  5 mL in 1 VIAL, GLASS (13533-200-05) </PackageDescription>
    <NDC11Code>76125-0663-50</NDC11Code>
    <ProductNDC>76125-663</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-672-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-672-50)  *  10 mL in 1 VIAL, GLASS (13533-000-05)  *  10 mL in 1 VIAL, GLASS (76125-673-51) </PackageDescription>
    <NDC11Code>76125-0672-50</NDC11Code>
    <ProductNDC>76125-672</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-676-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-676-50)  *  10 mL in 1 VIAL, GLASS (76125-673-51)  *  10 mL in 1 VIAL, GLASS (13533-000-05) </PackageDescription>
    <NDC11Code>76125-0676-50</NDC11Code>
    <ProductNDC>76125-676</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>23155-810-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (23155-810-05) </PackageDescription>
    <NDC11Code>23155-0810-05</NDC11Code>
    <ProductNDC>23155-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220131</StartMarketingDate>
    <EndMarketingDate>20270831</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208165</ApplicationNumber>
    <LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220131</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270831</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride tablets are indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).</IndicationAndUsage>
    <Description>Each scored oxybutynin chloride tablet contains 5 mg of oxybutynin chloride. Chemically, oxybutynin chloride is 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3. HCl. The structural formula appears below. Oxybutynin chloride is a white crystalline solid with a molecular weight of 393.96. It is readily soluble in water and acids, but relatively insoluble in alkalis.</Description>
  </NDC>
  <NDC>
    <NDCCode>40032-810-05</NDCCode>
    <PackageDescription>473 mL in 1 BOTTLE (40032-810-05) </PackageDescription>
    <NDC11Code>40032-0810-05</NDC11Code>
    <ProductNDC>40032-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Homatropine Methylbromide</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Homatropine Methylbromide</NonProprietaryName>
    <DosageFormName>SYRUP</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203535</ApplicationNumber>
    <LabelerName>Novel Laboratories, Inc.</LabelerName>
    <SubstanceName>HYDROCODONE BITARTRATE; HOMATROPINE METHYLBROMIDE</SubstanceName>
    <StrengthNumber>5; 1.5</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-12-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170213</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>Hydrocodone Bitartrate and Homatropine Methylbromide Oral Solution (Syrup) are indicated for the symptomatic relief of cough in adult patients 18 years of age and older. Limitations of Use: 1   Not indicated for pediatric patients under 18 years of age [see Use in Specific Populations (8.4) ]., 2   Contraindicated in pediatric patients less than 6 years of age [see Contraindications (4)]., 3   Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve Hydrocodone Bitartrate and Homatropine Methylbromide Oral Solution (Syrup) for use in adult patients for whom the benefits of cough suppression are expected to outweigh the risks, and in whom an adequate assessment of the etiology of the cough has been made.</IndicationAndUsage>
    <Description>Hydrocodone Bitartrate and Homatropine Methylbromide Oral Solution (Syrup), USP contains hydrocodone an opioid agonist; and Homatropine, a muscarinic antagonist. Each spoonful (5 mL) of Hydrocodone Bitartrate and Homatropine Methylbromide Oral Solution (Syrup) contains 5 mg hydrocodone bitartrate, USP and 1.5 mg of homatropine methylbromide, USP, for oral administration. Hydrocodone Bitartrate and Homatropine Methylbromide Oral Solution (Syrup) contains:  cherry flavor, citric acid, sodium citrate, FD&amp;C Red #40, methylparaben, propylene glycol, propylparaben, purified water, soribitol solution and sucrose. Hydrocodone Bitartrate. The chemical name for hydrocodone bitartrate is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one-tartrate (1:1) hydrate (2:5). It occurs as a fine white crystal or crystalline powder which is derived from the opium alkaloid, thebaine. It has a molecular weight of 494.50 and has the following chemical structure. C18H21NO3  C4H6O6  21/2H2O3. Homatropine Methylbromide. The chemical name for homatropine methylbromide is 8- Azoniabicyclo[3.2.1]octane, 3-[(hydroxyphenyl-acetyl)oxy]-8, 8-dimethyl-,bromide,endo. It occurs as a white crystal or fine white crystalline powder. It has a molecular weight of 370.29 and has the following chemical structure.     C17H24BrNO3.</Description>
  </NDC>
  <NDC>
    <NDCCode>46144-810-05</NDCCode>
    <PackageDescription>5 kg in 1 PACKAGE (46144-810-05)</PackageDescription>
    <NDC11Code>46144-0810-05</NDC11Code>
    <ProductNDC>46144-810</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Allantoin</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <StartMarketingDate>20150205</StartMarketingDate>
    <EndMarketingDate>20201231</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>API Solutions</LabelerName>
    <SubstanceName>ALLANTOIN</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>51316-810-05</NDCCode>
    <PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (51316-810-05)  / 40 CAPSULE in 1 BOTTLE, PLASTIC</PackageDescription>
    <NDC11Code>51316-0810-05</NDC11Code>
    <ProductNDC>51316-810</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Allergy Relief</ProprietaryName>
    <NonProprietaryName>Cetirizine Hcl</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213105</ApplicationNumber>
    <LabelerName>CVS PHARMACY, INC</LabelerName>
    <SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>57218-810-05</NDCCode>
    <PackageDescription>15 kg in 1 DRUM (57218-810-05) </PackageDescription>
    <NDC11Code>57218-0810-05</NDC11Code>
    <ProductNDC>57218-810</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20050101</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Malladi Drugs &amp; Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>01-JAN-05</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>65841-810-05</NDCCode>
    <PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (65841-810-05) </PackageDescription>
    <NDC11Code>65841-0810-05</NDC11Code>
    <ProductNDC>65841-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141209</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203686</ApplicationNumber>
    <LabelerName>Zydus Lifesciences Limited</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>850</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141209</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>68982-810-05</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-05)  &gt; 24 mL in 1 VIAL, GLASS (68982-810-85) </PackageDescription>
    <NDC11Code>68982-0810-05</NDC11Code>
    <ProductNDC>68982-810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Cutaquig</ProprietaryName>
    <NonProprietaryName>Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190503</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125668</ApplicationNumber>
    <LabelerName>Octapharma USA Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>165</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190503</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
    <Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
  </NDC>
  <NDC>
    <NDCCode>69263-810-01</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (69263-810-01)  *  2 mL in 1 AMPULE (0409-4282-01)  *  1 mL in 1 VIAL, SINGLE-DOSE (0003-0293-05)  *  1 mL in 1 PACKET (67618-153-01)  *  10 mL in 1 VIAL, SINGLE-DOSE (0409-1560-10)</PackageDescription>
    <NDC11Code>69263-0810-01</NDC11Code>
    <ProductNDC>69263-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pro-c-dure 1 Kit</ProprietaryName>
    <NonProprietaryName>Marcaine, Lidocaine, Kenalog, Povidone Iodine</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20150528</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA016964</ApplicationNumber>
    <LabelerName>Oaklock, LLC</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2015-11-18</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>70512-810-05</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 BOX (70512-810-05)  / 150 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>70512-0810-05</NDC11Code>
    <ProductNDC>70512-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diclofenac Sodium</ProprietaryName>
    <NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206116</ApplicationNumber>
    <LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DICLOFENAC SODIUM</SubstanceName>
    <StrengthNumber>16.05</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diclofenac sodium topical solution is indicated for the treatment of signs and symptoms of osteoarthritis of the knee(s).</IndicationAndUsage>
    <Description>Diclofenac sodium topical solution, USP 1.5% is a nonsteroidal anti-inflammatory drug, available as a clear, colorless to faintly pink-orange solution for topical application. Diclofenac sodium topical solution, USP contains 1.5% w/w diclofenac sodium, USP, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug (NSAID), designated chemically as 2-[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. It is a white to off-white crystalline powder, hygroscopic, and odorless that is freely soluble in methanol, soluble in alcohol, and sparingly soluble in water. The molecular weight is 318.13. Its molecular formula is C 14H 10Cl 2NNaO 2and it has the following structural formula:. Each 1 mL of solution contains 16.05 mg of diclofenac sodium, USP. The inactive ingredients in diclofenac sodium topical solution, USP include: alcohol, dimethyl sulfoxide USP (DMSO, 45.5% w/w), glycerin, propylene glycol, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>73770-810-05</NDCCode>
    <PackageDescription>150 mL in 1 BOTTLE, SPRAY (73770-810-05) </PackageDescription>
    <NDC11Code>73770-0810-05</NDC11Code>
    <ProductNDC>73770-810</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
    <DosageFormName>SPRAY</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200401</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Mi Amore Skincare, LLC</LabelerName>
    <SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
    <StrengthNumber>41.3</StrengthNumber>
    <StrengthUnit>mL/59mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>to decrease bacteria on the skin. recommended for repeated use.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>75839-810-05</NDCCode>
    <PackageDescription>500 g in 1 BOTTLE (75839-810-05)</PackageDescription>
    <NDC11Code>75839-0810-05</NDC11Code>
    <ProductNDC>75839-810</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Cisapride Monohydrate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20130411</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
    <LabelerName>Attix Pharmaceuticals Inc</LabelerName>
    <SubstanceName>CISAPRIDE MONOHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>g/500g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>78536-003-05</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (78536-003-05)  &gt; 150 NOT APPLICABLE in 1 BAG &gt; 810 mL in 1 NOT APPLICABLE</PackageDescription>
    <NDC11Code>78536-0003-05</NDC11Code>
    <ProductNDC>78536-003</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Alcohol Wipes</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>CLOTH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200707</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Zhejiang Yiwu Mingou Biotechnology Co., Ltd.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200707</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Use: Health care personnel hand rub to help reduce bacteria that potentially can cause disease.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84522-810-05</NDCCode>
    <PackageDescription>100 g in 1 BOX (84522-810-05) </PackageDescription>
    <NDC11Code>84522-0810-05</NDC11Code>
    <ProductNDC>84522-810</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Turmeric Vitamin C Cream</ProprietaryName>
    <NonProprietaryName>Turmeric Vitamin C Cream</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250108</StartMarketingDate>
    <EndMarketingDate>20310108</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M016</ApplicationNumber>
    <LabelerName>Yiwu Xinqian E Commerce Co Ltd</LabelerName>
    <SubstanceName>NIACINAMIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250108</StartMarketingDatePackage>
    <EndMarketingDatePackage>20310108</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84756-810-05</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (84756-810-05) </PackageDescription>
    <NDC11Code>84756-0810-05</NDC11Code>
    <ProductNDC>84756-810</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Beard Oil</ProprietaryName>
    <NonProprietaryName>Beard Oil</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20241209</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M032</ApplicationNumber>
    <LabelerName>Yiwu Luoxin E Commerce Co Ltd</LabelerName>
    <SubstanceName>MINOXIDIL</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241209</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>13533-335-04</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-335-04)  / 2 mL in 1 VIAL (13533-335-40) </PackageDescription>
    <NDC11Code>13533-0335-04</NDC11Code>
    <ProductNDC>13533-335</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gamastan</ProprietaryName>
    <NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180205</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101134</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>.165</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMASTAN is a human immune globulin indicated for:.</IndicationAndUsage>
    <Description>GAMASTAN is a clear or slightly opalescent, and colorless or pale yellow sterile solution of polyvalent human immune globulin for intramuscular administration. GAMASTAN contains no preservative. GAMASTAN is prepared from pools of human plasma collected from healthy donors by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. GAMASTAN consists of 15% to18% protein at pH of 4.1 to 4.8 in 0.16 to 0.26 M glycine. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of GAMASTAN, there are several steps with the capacity for viral inactivation or removal. The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-335-12</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-335-12)  / 10 mL in 1 VIAL (13533-335-13) </PackageDescription>
    <NDC11Code>13533-0335-12</NDC11Code>
    <ProductNDC>13533-335</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gamastan</ProprietaryName>
    <NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180205</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101134</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>.165</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMASTAN is a human immune globulin indicated for:.</IndicationAndUsage>
    <Description>GAMASTAN is a clear or slightly opalescent, and colorless or pale yellow sterile solution of polyvalent human immune globulin for intramuscular administration. GAMASTAN contains no preservative. GAMASTAN is prepared from pools of human plasma collected from healthy donors by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. GAMASTAN consists of 15% to18% protein at pH of 4.1 to 4.8 in 0.16 to 0.26 M glycine. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of GAMASTAN, there are several steps with the capacity for viral inactivation or removal. The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-613-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-613-20)  &gt; 50 mL in 1 VIAL (13533-613-21) </PackageDescription>
    <NDC11Code>13533-0613-20</NDC11Code>
    <ProductNDC>13533-613</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Plasmanate</ProprietaryName>
    <NonProprietaryName>Plasma Protein Fraction (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19581002</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101140</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19581002</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Treatment of Shock — Plasmanate is indicated in the treatment of shock due to burns, crushing injuries, abdominal emergencies, and any other cause where there is a predominant loss of plasma fluids and not red blood cells. It is also effective in the emergency treatment of shock due to hemorrhage.(3,4) Following the emergency phase of therapy, blood transfusions may be indicated depending on the severity of the blood loss. In infants and small children, Plasmanate has been found to be very useful in the initial therapy of shock due to dehydration and infection.</IndicationAndUsage>
    <Description>This product has been prepared from large pools of human plasma. Each 100 mL of Plasma Protein Fraction (Human) 5%, USP—Plasmanate® contains 5 g selected plasma proteins buffered with sodium carbonate and stabilized with 0.004 M sodium caprylate and 0.004 M acetyltryptophan. The plasma proteins consist of approximately 88% normal human albumin, 12% alpha and beta globulins and not more than 1% gamma globulin as determined by electrophoresis.(1) The concentration of these proteins is such that this solution is iso-oncotic with normal human plasma and is isotonic. The approximate concentrations of the significant electrolytes in Plasmanate are: sodium 145 mEq/L, potassium 0.25 mEq/L, and chloride 100 mEq/L. Plasmanate is clear and amber colored. Plasmanate must be administered intravenously. This product is designed to bring to the medical profession a preparation derived from human blood and similar to human plasma. Each vial of Plasmanate is sterile and heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. The blood group agglutinins and agglutinogens A and B are at such a low level in Plasmanate solution that its use has no effect on routine blood typing procedures. No chemical or microscopic alterations of the urine have been observed with its use. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. (5-8) The production steps from Pooled Plasma to Effluent IV-1 in the Plasmanate manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
</NDCList>