{
"NDC": [
{
"NDCCode": "13668-636-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-636-33) ",
"NDC11Code": "13668-0636-33",
"ProductNDC": "13668-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "43744-636-33",
"PackageDescription": "75 g in 1 DRUM (43744-636-33)",
"NDC11Code": "43744-0636-33",
"ProductNDC": "43744-636",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "67877-636-33",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (67877-636-33) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "67877-0636-33",
"ProductNDC": "67877-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200521",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211891",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "TOLVAPTAN",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200521",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated for the treatment of clinically significant hypervolemic and euvolemic hyponatremia (serum sodium <125 mEq/L or less marked hyponatremia that is symptomatic and has resisted correction with fluid restriction), including patients with heart failure and Syndrome of Inappropriate Antidiuretic Hormone (SIADH). Limitations of Use. Patients requiring intervention to raise serum sodium urgently to prevent or to treat serious neurological symptoms should not be treated with tolvaptan tablets. It has not been established that raising serum sodium with tolvaptan tablets provides a symptomatic benefit to patients.",
"Description": "Tolvaptan tablets contains tolvaptan, a selective vasopressin V2-receptor antagonist in tablets for oral use available in 15 mg, 30 mg or 60 mg strengths. Tolvaptan is (±)-4'-[(7-chloro-2,3,4,5-tetrahydro-5-hydroxy-1H-1-benzazepin-1-yl) carbonyl]-o-tolu-m-toluidide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.94. The chemical structure is. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, maize starch, microcrystalline cellulose, and FD&C Blue No. 2 Aluminum Lake as colorant."
},
{
"NDCCode": "13668-636-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (13668-636-05) ",
"NDC11Code": "13668-0636-05",
"ProductNDC": "13668-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-636-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (13668-636-60) ",
"NDC11Code": "13668-0636-60",
"ProductNDC": "13668-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-636-74",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (13668-636-74) / 10 TABLET in 1 BLISTER PACK (13668-636-71) ",
"NDC11Code": "13668-0636-74",
"ProductNDC": "13668-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-280-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-280-33) ",
"NDC11Code": "13668-0280-33",
"ProductNDC": "13668-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone Hcl And Metformin Hcl",
"NonProprietaryName": "Pioglitazone Hcl And Metformin Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202001",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE",
"StrengthNumber": "500; 15",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA], Peroxisome Proliferator-activated Receptor gamma Agonists [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Pioglitazone and metformin hydrochloride tablets, are a combination of pioglitazone, a thiazolidinedione agonist of peroxisome proliferator receptor gamma, and metformin hydrochloride (HCl), a biguanide, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1)Limitations of Use:Not recommended for treatment of type 1 diabetes or diabetic ketoacidosis. (1).",
"Description": "Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone HCl and metformin HCl. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone HCl, USP is an odorless white crystalline powder that has a molecular formula of C 19H 20N 2O 3SHCl and a molecular weight of 392.90 daltons. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin HCl ( N,N-dimethylimidodicarbonimidic diamide HCl), USP is a white crystalline powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available as a tablet for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following excipients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "13668-281-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-281-33) ",
"NDC11Code": "13668-0281-33",
"ProductNDC": "13668-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone Hcl And Metformin Hcl",
"NonProprietaryName": "Pioglitazone Hcl And Metformin Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202001",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE",
"StrengthNumber": "850; 15",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA], Peroxisome Proliferator-activated Receptor gamma Agonists [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Pioglitazone and metformin hydrochloride tablets, are a combination of pioglitazone, a thiazolidinedione agonist of peroxisome proliferator receptor gamma, and metformin hydrochloride (HCl), a biguanide, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1)Limitations of Use:Not recommended for treatment of type 1 diabetes or diabetic ketoacidosis. (1).",
"Description": "Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone HCl and metformin HCl. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone HCl, USP is an odorless white crystalline powder that has a molecular formula of C 19H 20N 2O 3SHCl and a molecular weight of 392.90 daltons. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin HCl ( N,N-dimethylimidodicarbonimidic diamide HCl), USP is a white crystalline powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available as a tablet for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following excipients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "13668-634-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-634-33) ",
"NDC11Code": "13668-0634-33",
"ProductNDC": "13668-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-635-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-635-33) ",
"NDC11Code": "13668-0635-33",
"ProductNDC": "13668-635",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-746-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-746-33) ",
"NDC11Code": "13668-0746-33",
"ProductNDC": "13668-746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-747-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-747-33) ",
"NDC11Code": "13668-0747-33",
"ProductNDC": "13668-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "21695-636-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (21695-636-60)",
"NDC11Code": "21695-0636-60",
"ProductNDC": "21695-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin Slocaps",
"NonProprietaryName": "Nitroglycerin Sustained-release Capsules",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19820825",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "6.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Nitroglycerin Slocaps® (Nitroglycerin) are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. Each NITROGLYCERIN SLOCAP®, for oral administration, contains 2.5 mg, 6.5 mg, or 9 mg of nitroglycerin. Each capsule also contains the following inactive ingredients: gelatin, lactose, pharmaceutical glaze, corn starch, sucrose, talc and other ingredients. In addition, the 2.5 mg capsule contains FD&C Blue #1, FD&C Red #3 and D&C Yellow #10; the 6.5 mg capsule contains FD&C Blue #1, D&C Red #33, FD&C Yellow #6, and D&C Yellow #10; and the 9 mg capsule contains FD&C Green #3, FD&C Yellow #6, D&C Yellow #10 and titanium dioxide."
},
{
"NDCCode": "61919-636-20",
"PackageDescription": "20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (61919-636-20)",
"NDC11Code": "61919-0636-20",
"ProductNDC": "61919-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090745",
"LabelerName": "DIRECT RX",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Duloxetine delayed-release capsules USP are indicated for the treatment of:. Major Depressive Disorder [see Clinical Studies (14.1)] Generalized Anxiety Disorder [see Clinical Studies (14.2)] Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)] Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is: [spl-duloxetine-structure]. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg, 33.7 mg, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20 mg, 30 mg, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, maize starch, hypromellose, mannitol, talc, sucrose, methacrylic acid co-polymer dispersion, triethyl citrate and sodium hydroxide. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide, FD & C Blue No. 2, and iron oxide yellow (20 mg and 60 mg). For 20 mg & 30 mg strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. For 60 mg strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, titanium dioxide, potassium hydroxide, and purified water."
},
{
"NDCCode": "61919-636-60",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (61919-636-60)",
"NDC11Code": "61919-0636-60",
"ProductNDC": "61919-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090745",
"LabelerName": "DIRECT RX",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Duloxetine delayed-release capsules USP are indicated for the treatment of:. Major Depressive Disorder [see Clinical Studies (14.1)] Generalized Anxiety Disorder [see Clinical Studies (14.2)] Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)] Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is: [spl-duloxetine-structure]. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg, 33.7 mg, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20 mg, 30 mg, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, maize starch, hypromellose, mannitol, talc, sucrose, methacrylic acid co-polymer dispersion, triethyl citrate and sodium hydroxide. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide, FD & C Blue No. 2, and iron oxide yellow (20 mg and 60 mg). For 20 mg & 30 mg strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. For 60 mg strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, titanium dioxide, potassium hydroxide, and purified water."
},
{
"NDCCode": "76420-636-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-01) ",
"NDC11Code": "76420-0636-01",
"ProductNDC": "76420-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190325",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231017",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "76420-636-20",
"PackageDescription": "20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-20) ",
"NDC11Code": "76420-0636-20",
"ProductNDC": "76420-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190325",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250403",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "76420-636-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-30) ",
"NDC11Code": "76420-0636-30",
"ProductNDC": "76420-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190325",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231017",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "76420-636-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-90) ",
"NDC11Code": "76420-0636-90",
"ProductNDC": "76420-636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190325",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231017",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "13668-109-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-01) ",
"NDC11Code": "13668-0109-01",
"ProductNDC": "13668-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-109-05",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-05) ",
"NDC11Code": "13668-0109-05",
"ProductNDC": "13668-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-109-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-30) ",
"NDC11Code": "13668-0109-30",
"ProductNDC": "13668-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-109-60",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-60) ",
"NDC11Code": "13668-0109-60",
"ProductNDC": "13668-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-110-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-01) ",
"NDC11Code": "13668-0110-01",
"ProductNDC": "13668-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-110-05",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-05) ",
"NDC11Code": "13668-0110-05",
"ProductNDC": "13668-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-110-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-30) ",
"NDC11Code": "13668-0110-30",
"ProductNDC": "13668-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-111-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-01) ",
"NDC11Code": "13668-0111-01",
"ProductNDC": "13668-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-111-05",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-05) ",
"NDC11Code": "13668-0111-05",
"ProductNDC": "13668-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-111-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-30) ",
"NDC11Code": "13668-0111-30",
"ProductNDC": "13668-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetin Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090774",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).",
"Description": "Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide)."
},
{
"NDCCode": "13668-330-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (13668-330-01) ",
"NDC11Code": "13668-0330-01",
"ProductNDC": "13668-330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trazodone Hydrochloride",
"NonProprietaryName": "Trazodone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202180",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "TRAZODONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20131127",
"SamplePackage": "N",
"IndicationAndUsage": "Trazodone hydrochloride tablets are a selective serotonin reuptake inhibitor indicated for the treatment of major depressive disorder (MDD) (1).",
"Description": "Trazodone hydrochloride tablets for oral administration contain trazodone hydrochloride, a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]-1,2,4-triazolo[4,3-a]pyridin-3(2H)-one hydrochloride. It is a white odorless crystalline powder which is freely soluble in water. The structural formula is represented as follows. Molecular Formula: C19H22ClN5O · HCl. Molecular Weight: 408.33. Each tablet, for oral administration, contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, sodium lauryl sulfate, and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>13668-636-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-636-33) </PackageDescription>
<NDC11Code>13668-0636-33</NDC11Code>
<ProductNDC>13668-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>43744-636-33</NDCCode>
<PackageDescription>75 g in 1 DRUM (43744-636-33)</PackageDescription>
<NDC11Code>43744-0636-33</NDC11Code>
<ProductNDC>43744-636</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67877-636-33</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (67877-636-33) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67877-0636-33</NDC11Code>
<ProductNDC>67877-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200521</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211891</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>TOLVAPTAN</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated for the treatment of clinically significant hypervolemic and euvolemic hyponatremia (serum sodium <125 mEq/L or less marked hyponatremia that is symptomatic and has resisted correction with fluid restriction), including patients with heart failure and Syndrome of Inappropriate Antidiuretic Hormone (SIADH). Limitations of Use. Patients requiring intervention to raise serum sodium urgently to prevent or to treat serious neurological symptoms should not be treated with tolvaptan tablets. It has not been established that raising serum sodium with tolvaptan tablets provides a symptomatic benefit to patients.</IndicationAndUsage>
<Description>Tolvaptan tablets contains tolvaptan, a selective vasopressin V2-receptor antagonist in tablets for oral use available in 15 mg, 30 mg or 60 mg strengths. Tolvaptan is (±)-4'-[(7-chloro-2,3,4,5-tetrahydro-5-hydroxy-1H-1-benzazepin-1-yl) carbonyl]-o-tolu-m-toluidide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.94. The chemical structure is. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, maize starch, microcrystalline cellulose, and FD&C Blue No. 2 Aluminum Lake as colorant.</Description>
</NDC>
<NDC>
<NDCCode>13668-636-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (13668-636-05) </PackageDescription>
<NDC11Code>13668-0636-05</NDC11Code>
<ProductNDC>13668-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-636-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (13668-636-60) </PackageDescription>
<NDC11Code>13668-0636-60</NDC11Code>
<ProductNDC>13668-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-636-74</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (13668-636-74) / 10 TABLET in 1 BLISTER PACK (13668-636-71) </PackageDescription>
<NDC11Code>13668-0636-74</NDC11Code>
<ProductNDC>13668-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-280-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-280-33) </PackageDescription>
<NDC11Code>13668-0280-33</NDC11Code>
<ProductNDC>13668-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone Hcl And Metformin Hcl</ProprietaryName>
<NonProprietaryName>Pioglitazone Hcl And Metformin Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202001</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA], Peroxisome Proliferator-activated Receptor gamma Agonists [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pioglitazone and metformin hydrochloride tablets, are a combination of pioglitazone, a thiazolidinedione agonist of peroxisome proliferator receptor gamma, and metformin hydrochloride (HCl), a biguanide, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1)Limitations of Use:Not recommended for treatment of type 1 diabetes or diabetic ketoacidosis. (1).</IndicationAndUsage>
<Description>Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone HCl and metformin HCl. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone HCl, USP is an odorless white crystalline powder that has a molecular formula of C 19H 20N 2O 3SHCl and a molecular weight of 392.90 daltons. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin HCl ( N,N-dimethylimidodicarbonimidic diamide HCl), USP is a white crystalline powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available as a tablet for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following excipients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>13668-281-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-281-33) </PackageDescription>
<NDC11Code>13668-0281-33</NDC11Code>
<ProductNDC>13668-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone Hcl And Metformin Hcl</ProprietaryName>
<NonProprietaryName>Pioglitazone Hcl And Metformin Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202001</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA], Peroxisome Proliferator-activated Receptor gamma Agonists [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pioglitazone and metformin hydrochloride tablets, are a combination of pioglitazone, a thiazolidinedione agonist of peroxisome proliferator receptor gamma, and metformin hydrochloride (HCl), a biguanide, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1)Limitations of Use:Not recommended for treatment of type 1 diabetes or diabetic ketoacidosis. (1).</IndicationAndUsage>
<Description>Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone HCl and metformin HCl. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone HCl, USP is an odorless white crystalline powder that has a molecular formula of C 19H 20N 2O 3SHCl and a molecular weight of 392.90 daltons. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin HCl ( N,N-dimethylimidodicarbonimidic diamide HCl), USP is a white crystalline powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available as a tablet for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following excipients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>13668-634-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-634-33) </PackageDescription>
<NDC11Code>13668-0634-33</NDC11Code>
<ProductNDC>13668-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-635-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-635-33) </PackageDescription>
<NDC11Code>13668-0635-33</NDC11Code>
<ProductNDC>13668-635</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-746-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-746-33) </PackageDescription>
<NDC11Code>13668-0746-33</NDC11Code>
<ProductNDC>13668-746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-747-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-747-33) </PackageDescription>
<NDC11Code>13668-0747-33</NDC11Code>
<ProductNDC>13668-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>21695-636-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (21695-636-60)</PackageDescription>
<NDC11Code>21695-0636-60</NDC11Code>
<ProductNDC>21695-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin Slocaps</ProprietaryName>
<NonProprietaryName>Nitroglycerin Sustained-release Capsules</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19820825</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>6.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Nitroglycerin Slocaps® (Nitroglycerin) are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. Each NITROGLYCERIN SLOCAP®, for oral administration, contains 2.5 mg, 6.5 mg, or 9 mg of nitroglycerin. Each capsule also contains the following inactive ingredients: gelatin, lactose, pharmaceutical glaze, corn starch, sucrose, talc and other ingredients. In addition, the 2.5 mg capsule contains FD&C Blue #1, FD&C Red #3 and D&C Yellow #10; the 6.5 mg capsule contains FD&C Blue #1, D&C Red #33, FD&C Yellow #6, and D&C Yellow #10; and the 9 mg capsule contains FD&C Green #3, FD&C Yellow #6, D&C Yellow #10 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>61919-636-20</NDCCode>
<PackageDescription>20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (61919-636-20)</PackageDescription>
<NDC11Code>61919-0636-20</NDC11Code>
<ProductNDC>61919-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090745</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Duloxetine delayed-release capsules USP are indicated for the treatment of:. Major Depressive Disorder [see Clinical Studies (14.1)] Generalized Anxiety Disorder [see Clinical Studies (14.2)] Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)] Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is: [spl-duloxetine-structure]. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg, 33.7 mg, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20 mg, 30 mg, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, maize starch, hypromellose, mannitol, talc, sucrose, methacrylic acid co-polymer dispersion, triethyl citrate and sodium hydroxide. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide, FD & C Blue No. 2, and iron oxide yellow (20 mg and 60 mg). For 20 mg & 30 mg strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. For 60 mg strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, titanium dioxide, potassium hydroxide, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>61919-636-60</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (61919-636-60)</PackageDescription>
<NDC11Code>61919-0636-60</NDC11Code>
<ProductNDC>61919-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090745</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Duloxetine delayed-release capsules USP are indicated for the treatment of:. Major Depressive Disorder [see Clinical Studies (14.1)] Generalized Anxiety Disorder [see Clinical Studies (14.2)] Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)] Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is: [spl-duloxetine-structure]. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg, 33.7 mg, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20 mg, 30 mg, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, maize starch, hypromellose, mannitol, talc, sucrose, methacrylic acid co-polymer dispersion, triethyl citrate and sodium hydroxide. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide, FD & C Blue No. 2, and iron oxide yellow (20 mg and 60 mg). For 20 mg & 30 mg strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. For 60 mg strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, titanium dioxide, potassium hydroxide, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>76420-636-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-01) </PackageDescription>
<NDC11Code>76420-0636-01</NDC11Code>
<ProductNDC>76420-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190325</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>76420-636-20</NDCCode>
<PackageDescription>20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-20) </PackageDescription>
<NDC11Code>76420-0636-20</NDC11Code>
<ProductNDC>76420-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190325</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>76420-636-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-30) </PackageDescription>
<NDC11Code>76420-0636-30</NDC11Code>
<ProductNDC>76420-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190325</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>76420-636-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-636-90) </PackageDescription>
<NDC11Code>76420-0636-90</NDC11Code>
<ProductNDC>76420-636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190325</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine hydrochloride USP (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>13668-109-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-01) </PackageDescription>
<NDC11Code>13668-0109-01</NDC11Code>
<ProductNDC>13668-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-109-05</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-05) </PackageDescription>
<NDC11Code>13668-0109-05</NDC11Code>
<ProductNDC>13668-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-109-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-30) </PackageDescription>
<NDC11Code>13668-0109-30</NDC11Code>
<ProductNDC>13668-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-109-60</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-109-60) </PackageDescription>
<NDC11Code>13668-0109-60</NDC11Code>
<ProductNDC>13668-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-110-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-01) </PackageDescription>
<NDC11Code>13668-0110-01</NDC11Code>
<ProductNDC>13668-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-110-05</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-05) </PackageDescription>
<NDC11Code>13668-0110-05</NDC11Code>
<ProductNDC>13668-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-110-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-110-30) </PackageDescription>
<NDC11Code>13668-0110-30</NDC11Code>
<ProductNDC>13668-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-111-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-01) </PackageDescription>
<NDC11Code>13668-0111-01</NDC11Code>
<ProductNDC>13668-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-111-05</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-05) </PackageDescription>
<NDC11Code>13668-0111-05</NDC11Code>
<ProductNDC>13668-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-111-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-111-30) </PackageDescription>
<NDC11Code>13668-0111-30</NDC11Code>
<ProductNDC>13668-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090774</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of the following conditions: 1 Major depressive disorder (MDD) in adults (1), 2 Generalized anxiety disorder (GAD) in adults and pediatric patients 7 years of age and older (1), 3 Diabetic peripheral neuropathic pain (DPNP) in adults (1), 4 Fibromyalgia (FM) in adults and pediatric patients 13 years of age older (1), 5 Chronic musculoskeletal pain in adults (1).</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.45, 33.68, or 67.36 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include. 20 mg: FD&C Blue No. 2, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac). 30 mg: FD&C Blue No. 1, FD&C Red No. 40, gelatin, hypromellose, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, black imprinting ink (It contains black iron oxide, potassium hydroxide, propylene glycol, and shellac), white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide). 60 mg: FD&C Blue No. 2, gelatin, hypromellose, iron oxide yellow, methacrylic acid copolymer dispersion, polyethylene glycol 400, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide, triethyl citrate, white imprinting ink (It contains povidone, shellac, sodium hydroxide, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>13668-330-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (13668-330-01) </PackageDescription>
<NDC11Code>13668-0330-01</NDC11Code>
<ProductNDC>13668-330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trazodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Trazodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202180</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>TRAZODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trazodone hydrochloride tablets are a selective serotonin reuptake inhibitor indicated for the treatment of major depressive disorder (MDD) (1).</IndicationAndUsage>
<Description>Trazodone hydrochloride tablets for oral administration contain trazodone hydrochloride, a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]-1,2,4-triazolo[4,3-a]pyridin-3(2H)-one hydrochloride. It is a white odorless crystalline powder which is freely soluble in water. The structural formula is represented as follows. Molecular Formula: C19H22ClN5O · HCl. Molecular Weight: 408.33. Each tablet, for oral administration, contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
</NDCList>