{
"NDC": [
{
"NDCCode": "14335-180-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (14335-180-10) / 35 mL in 1 BOTTLE",
"NDC11Code": "14335-0180-10",
"ProductNDC": "14335-180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20231201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215738",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20231201",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole for oral suspension is indicated for the treatment of: 1. Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole for oral suspension was also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. 2. Cryptococcal meningitis. Before prescribing fluconazole for oral suspension for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole for oral suspension to amphotericin B in non-HIV infected patients have not been conducted. Prophylaxis: Fluconazole for oral suspension is also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as a powder for oral suspension. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with a molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white, crystalline powder which is slightly soluble in water and saline. Fluconazole for oral suspension USP contains 1400 mg of fluconazole and the following inactive ingredients: sodium benzoate, citric acid anhydrous, sodium citrate dihydrate, xanthan gum, titanium dioxide, colloidal silicon dioxide, and sucrose. After reconstitution with 24 mL of distilled water or Purified Water (USP), each mL of reconstituted suspension contains 40 mg of fluconazole."
},
{
"NDCCode": "14335-180-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (14335-180-01) / 35 mL in 1 BOTTLE",
"NDC11Code": "14335-0180-01",
"ProductNDC": "14335-180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"EndMarketingDate": "20250411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215738",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240101",
"EndMarketingDatePackage": "20250411",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole for oral suspension is indicated for the treatment of: 1. Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole for oral suspension was also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. 2. Cryptococcal meningitis. Before prescribing fluconazole for oral suspension for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole for oral suspension to amphotericin B in non-HIV infected patients have not been conducted. Prophylaxis: Fluconazole for oral suspension is also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as a powder for oral suspension. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with a molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white, crystalline powder which is slightly soluble in water and saline. Fluconazole for oral suspension USP contains 1400 mg of fluconazole and the following inactive ingredients: sodium benzoate, citric acid anhydrous, sodium citrate dihydrate, xanthan gum, titanium dioxide, colloidal silicon dioxide, and sucrose. After reconstitution with 24 mL of distilled water or Purified Water (USP), each mL of reconstituted suspension contains 40 mg of fluconazole."
},
{
"NDCCode": "14335-030-01",
"PackageDescription": "10 VIAL in 1 CARTON (14335-030-01) > 10 mL in 1 VIAL",
"NDC11Code": "14335-0030-01",
"ProductNDC": "14335-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ganciclovir",
"NonProprietaryName": "Ganciclovir Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENTRICULAR",
"StartMarketingDate": "20190211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204204",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "GANCICLOVIR SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],DNA Polymerase Inhibitors [MoA],Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190211",
"SamplePackage": "N",
"IndicationAndUsage": "Ganciclovir for Injection, USP is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for the: 1 treatment of CMV retinitis in immunocompromised adult patients, including patients with acquired immunodeficiency syndrome (AIDS). ( 1.1) , 2 prevention of CMV disease in adult transplant recipients at risk for CMV disease. ( 1.2) .",
"Description": "Ganciclovir for injection contains ganciclovir, in the form of the sodium salt for intravenous injection. Ganciclovir is a synthetic guanine derivative active against cytomegalovirus (CMV). Chemically, ganciclovir is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine and ganciclovir sodium is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine, monosodium salt. The chemical structures of ganciclovir sodium and ganciclovir are. Ganciclovir is a white to off-white crystalline powder. Ganciclovir is a polar hydrophilic compound with a solubility of 2.6 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.022. The pK as for ganciclovir are 2.2 and 9.4. Ganciclovir for injection (ganciclovir), formulated as monosodium salt, using sodium hydroxide as a salt forming agent, is a sterile white to off-white lyophilized powder. The lyophilized powder has an aqueous solubility of greater than 50 mg/mL at 25°C. At physiological pH, ganciclovir sodium exists as the un-ionized form with a solubility of approximately 6 mg/mL at 37°C. Each vial contains ganciclovir sodium equivalent to 500 mg ganciclovir. Inactive ingredients may include hydrochloric acid (QS) and sodium hydroxide (QS) added to adjust the pH. All doses in this package insert are specified in terms of ganciclovir."
},
{
"NDCCode": "14335-030-25",
"PackageDescription": "25 VIAL in 1 CARTON (14335-030-25) > 10 mL in 1 VIAL",
"NDC11Code": "14335-0030-25",
"ProductNDC": "14335-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ganciclovir",
"NonProprietaryName": "Ganciclovir Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENTRICULAR",
"StartMarketingDate": "20190211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204204",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "GANCICLOVIR SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],DNA Polymerase Inhibitors [MoA],Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190211",
"SamplePackage": "N",
"IndicationAndUsage": "Ganciclovir for Injection, USP is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for the: 1 treatment of CMV retinitis in immunocompromised adult patients, including patients with acquired immunodeficiency syndrome (AIDS). ( 1.1) , 2 prevention of CMV disease in adult transplant recipients at risk for CMV disease. ( 1.2) .",
"Description": "Ganciclovir for injection contains ganciclovir, in the form of the sodium salt for intravenous injection. Ganciclovir is a synthetic guanine derivative active against cytomegalovirus (CMV). Chemically, ganciclovir is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine and ganciclovir sodium is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine, monosodium salt. The chemical structures of ganciclovir sodium and ganciclovir are. Ganciclovir is a white to off-white crystalline powder. Ganciclovir is a polar hydrophilic compound with a solubility of 2.6 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.022. The pK as for ganciclovir are 2.2 and 9.4. Ganciclovir for injection (ganciclovir), formulated as monosodium salt, using sodium hydroxide as a salt forming agent, is a sterile white to off-white lyophilized powder. The lyophilized powder has an aqueous solubility of greater than 50 mg/mL at 25°C. At physiological pH, ganciclovir sodium exists as the un-ionized form with a solubility of approximately 6 mg/mL at 37°C. Each vial contains ganciclovir sodium equivalent to 500 mg ganciclovir. Inactive ingredients may include hydrochloric acid (QS) and sodium hydroxide (QS) added to adjust the pH. All doses in this package insert are specified in terms of ganciclovir."
},
{
"NDCCode": "14335-050-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (14335-050-10) > 5 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "14335-0050-10",
"ProductNDC": "14335-050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209781",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20181130",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam is indicated for adjunctive therapy, as an alternative when oral administration is temporarily not feasible, in the treatment of: 1 Partial onset seizures in patients 1 month of age and older with epilepsy ( 1.1) , 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy ( 1.2) , 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy ( 1.3) .",
"Description": "Levetiracetam injection is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-use 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [ see Dosage and Administration (2.6)]."
},
{
"NDCCode": "14335-060-01",
"PackageDescription": "10 VIAL in 1 CARTON (14335-060-01) > 5 mL in 1 VIAL",
"NDC11Code": "14335-0060-01",
"ProductNDC": "14335-060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Sodium",
"NonProprietaryName": "Esomeprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215732",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "ESOMEPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210131",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole sodium for injection is a proton pump inhibitor (PPI) indicated for the: 1 Short-term treatment of Gastroesophageal Reflux Disease (GERD) with erosive esophagitis (EE) in adults and pediatric patients 1 month to 17 years of age, as an alternative to oral therapy when oral esomeprazole is not possible or appropriate. (1.1), 2 Risk reduction of rebleeding of gastric or duodenal ulcers following therapeutic endoscopy for acute bleeding gastric or duodenal ulcers in adults. (1.2).",
"Description": "The active ingredient in esomeprazole sodium for injection is ( S)-5-methoxy-2[[(4-methoxy-3,5- dimethyl-2-pyridinyl)-methyl]sulfinyl]-1 H-benzimidazole sodium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. Its empirical formula is C 17H 18N 3O 3SNa with molecular weight of 367.4 g/mol (sodium salt) and 345.4 g/mol (parent compound). Esomeprazole sodium is very soluble in water and freely soluble in ethanol (95%). The structural formula is:. Esomeprazole sodium for injection is supplied as a sterile, lyophilized, white to off-white, porous cake or powder in a 5 mL single-dose vial, intended for intravenous administration after reconstitution with 0.9% Sodium Chloride Injection, USP; Lactated Ringer’s Injection, USP or 5% Dextrose Injection, USP. Esomeprazole sodium for injection contains 40 mg esomeprazole (equivalent to 42.5 mg esomeprazole sodium), edetate disodium 1.5 mg and sodium hydroxide q.s. for pH adjustment. The pH of reconstituted solution of esomeprazole sodium for injection depends on the reconstitution volume and is in the pH range of 9 to 11. The stability of esomeprazole sodium in aqueous solution is strongly pH dependent. The rate of degradation increases with decreasing pH."
},
{
"NDCCode": "14335-070-01",
"PackageDescription": "10 mL in 1 VIAL (14335-070-01) ",
"NDC11Code": "14335-0070-01",
"ProductNDC": "14335-070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eptifibatide",
"NonProprietaryName": "Eptifibatide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209864",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "EPTIFIBATIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190722",
"SamplePackage": "N",
"IndicationAndUsage": "Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .",
"Description": "Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of eptifibatide injection and each 100-mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35."
},
{
"NDCCode": "14335-130-03",
"PackageDescription": "10 kg in 1 DRUM (14335-130-03) ",
"NDC11Code": "14335-0130-03",
"ProductNDC": "14335-130",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240531",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": "10",
"StrengthUnit": "kg/10kg",
"Status": "Unfinished",
"LastUpdate": "2024-11-21",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "31-MAY-24"
},
{
"NDCCode": "14335-270-01",
"PackageDescription": "10 kg in 1 DRUM (14335-270-01) ",
"NDC11Code": "14335-0270-01",
"ProductNDC": "14335-270",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "10-DEC-21"
},
{
"NDCCode": "14335-330-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (14335-330-10) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "14335-0330-10",
"ProductNDC": "14335-330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217311",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220331",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide Injection is indicated for: 1 Treatment of partial-onset seizures in patients 4 years of age and older ( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "14335-380-01",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (14335-380-01) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "14335-0380-01",
"ProductNDC": "14335-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oseltamivir Phosphate",
"NonProprietaryName": "Oseltamivir Phosphate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20231129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218009",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "OSELTAMIVIR PHOSPHATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20231129",
"SamplePackage": "N",
"IndicationAndUsage": "Oseltamivir phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. ( 1.1) , 2 Prophylaxis of influenza A and B in patients 1 year and older. ( 1.2) .",
"Description": "Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI), is available as: 1 Capsules containing 75 mg of oseltamivir for oral use, in the form of oseltamivir phosphate."
},
{
"NDCCode": "14335-420-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (14335-420-10) / 5 mL in 1 VIAL, GLASS (14335-420-01) ",
"NDC11Code": "14335-0420-10",
"ProductNDC": "14335-420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218249",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "50",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1 H-pyrrol-1-yl] butanamide. Its molecular formula is C 11H 20N 2O 2and its molecular weight is 212.29. The chemical structure is:. Brivaracetam is a white to off-white crystalline powder. It is very soluble in water, buffer (pH 1.2, 4.5, and 7.4), ethanol, methanol, and glacial acetic acid. It is freely soluble in acetonitrile and acetone and soluble in toluene. It is very slightly soluble in n-hexane."
},
{
"NDCCode": "14335-430-10",
"PackageDescription": "3 mL in 1 VIAL, GLASS (14335-430-10) ",
"NDC11Code": "14335-0430-10",
"ProductNDC": "14335-430",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218253",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] ."
},
{
"NDCCode": "14335-431-10",
"PackageDescription": "9 mL in 1 VIAL, GLASS (14335-431-10) ",
"NDC11Code": "14335-0431-10",
"ProductNDC": "14335-431",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218253",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] ."
},
{
"NDCCode": "14335-432-10",
"PackageDescription": "18 mL in 1 VIAL, GLASS (14335-432-10) ",
"NDC11Code": "14335-0432-10",
"ProductNDC": "14335-432",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218253",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] ."
},
{
"NDCCode": "14335-441-01",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (14335-441-01) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "14335-0441-01",
"ProductNDC": "14335-441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218412",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240319",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine hydrochloride injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9H 14ClNO 2with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5."
},
{
"NDCCode": "14335-442-01",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (14335-442-01) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "14335-0442-01",
"ProductNDC": "14335-442",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218412",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240319",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine hydrochloride injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9H 14ClNO 2with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5."
},
{
"NDCCode": "14335-470-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (14335-470-10) / 25 mL in 1 VIAL, SINGLE-DOSE (14335-470-01) ",
"NDC11Code": "14335-0470-10",
"ProductNDC": "14335-470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218632",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250103",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "14335-471-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (14335-471-10) / 50 mL in 1 VIAL, SINGLE-DOSE (14335-471-01) ",
"NDC11Code": "14335-0471-10",
"ProductNDC": "14335-471",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218632",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250103",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "14335-472-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (14335-472-10) / 100 mL in 1 VIAL, SINGLE-DOSE (14335-472-01) ",
"NDC11Code": "14335-0472-10",
"ProductNDC": "14335-472",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218632",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250103",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "14335-730-10",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (14335-730-10) / 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "14335-0730-10",
"ProductNDC": "14335-730",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220043",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251120",
"SamplePackage": "N",
"IndicationAndUsage": "Voriconazole injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis ( 1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candidainfections ( 1.2) , 3 Esophageal candidiasis ( 1.3) , 4 Serious fungal infections caused by Scedosporium apiospermumand Fusariumspecies including Fusarium solani, in patients intolerant of, or refractory to, other therapy ( 1.4) .",
"Description": "Voriconazole, an azole antifungal agent is available as a sterile, clear, colorless solution for intravenous infusion. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C 16H 14F 3N 5O and a molecular weight of 349.3. Voriconazole drug substance is a white to light-colored powder. Voriconazole injection is a solution containing nominally 200 mg/20 mL (10 mg/mL) of voriconazole and 3,200 mg/20 mL (160 mg/mL) of sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. The solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)] ."
},
{
"NDCCode": "14335-071-01",
"PackageDescription": "100 mL in 1 VIAL (14335-071-01) ",
"NDC11Code": "14335-0071-01",
"ProductNDC": "14335-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eptifibatide",
"NonProprietaryName": "Eptifibatide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209864",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "EPTIFIBATIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190722",
"SamplePackage": "N",
"IndicationAndUsage": "Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .",
"Description": "Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of eptifibatide injection and each 100-mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35."
},
{
"NDCCode": "14335-080-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (14335-080-01) > 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "14335-0080-01",
"ProductNDC": "14335-080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211661",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 2C9 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190128",
"SamplePackage": "N"
},
{
"NDCCode": "14335-130-01",
"PackageDescription": "1.5 kg in 1 BOX (14335-130-01) ",
"NDC11Code": "14335-0130-01",
"ProductNDC": "14335-130",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-12-07",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "10-DEC-21"
},
{
"NDCCode": "14335-130-02",
"PackageDescription": "2 kg in 1 BOX (14335-130-02) ",
"NDC11Code": "14335-0130-02",
"ProductNDC": "14335-130",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-12-07",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "10-DEC-21"
},
{
"NDCCode": "14335-132-01",
"PackageDescription": "1 VIAL in 1 CARTON (14335-132-01) > 50 mL in 1 VIAL",
"NDC11Code": "14335-0132-01",
"ProductNDC": "14335-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Nitroprusside",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215846",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Vasodilation [PE], Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221231",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).",
"Description": "Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP."
},
{
"NDCCode": "14335-133-01",
"PackageDescription": "1 VIAL in 1 CARTON (14335-133-01) > 100 mL in 1 VIAL",
"NDC11Code": "14335-0133-01",
"ProductNDC": "14335-133",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Nitroprusside",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215846",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Vasodilation [PE], Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221231",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).",
"Description": "Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP."
},
{
"NDCCode": "14335-134-01",
"PackageDescription": "1 VIAL in 1 CARTON (14335-134-01) > 100 mL in 1 VIAL",
"NDC11Code": "14335-0134-01",
"ProductNDC": "14335-134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Nitroprusside",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215846",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Vasodilation [PE], Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221231",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).",
"Description": "Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP."
},
{
"NDCCode": "14335-140-01",
"PackageDescription": "2.5 kg in 1 BOTTLE (14335-140-01) ",
"NDC11Code": "14335-0140-01",
"ProductNDC": "14335-140",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Esomeprazole Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "ESOMEPRAZOLE SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "10-DEC-21"
},
{
"NDCCode": "14335-150-01",
"PackageDescription": "8 kg in 1 DRUM (14335-150-01) ",
"NDC11Code": "14335-0150-01",
"ProductNDC": "14335-150",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Acyclovir Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hainan Poly Pharm. Co., Ltd.",
"SubstanceName": "ACYCLOVIR SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "10-DEC-21"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>14335-180-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (14335-180-10) / 35 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>14335-0180-10</NDC11Code>
<ProductNDC>14335-180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215738</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole for oral suspension is indicated for the treatment of: 1. Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole for oral suspension was also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. 2. Cryptococcal meningitis. Before prescribing fluconazole for oral suspension for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole for oral suspension to amphotericin B in non-HIV infected patients have not been conducted. Prophylaxis: Fluconazole for oral suspension is also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as a powder for oral suspension. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with a molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white, crystalline powder which is slightly soluble in water and saline. Fluconazole for oral suspension USP contains 1400 mg of fluconazole and the following inactive ingredients: sodium benzoate, citric acid anhydrous, sodium citrate dihydrate, xanthan gum, titanium dioxide, colloidal silicon dioxide, and sucrose. After reconstitution with 24 mL of distilled water or Purified Water (USP), each mL of reconstituted suspension contains 40 mg of fluconazole.</Description>
</NDC>
<NDC>
<NDCCode>14335-180-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (14335-180-01) / 35 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>14335-0180-01</NDC11Code>
<ProductNDC>14335-180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<EndMarketingDate>20250411</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215738</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<EndMarketingDatePackage>20250411</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole for oral suspension is indicated for the treatment of: 1. Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole for oral suspension was also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. 2. Cryptococcal meningitis. Before prescribing fluconazole for oral suspension for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole for oral suspension to amphotericin B in non-HIV infected patients have not been conducted. Prophylaxis: Fluconazole for oral suspension is also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as a powder for oral suspension. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with a molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white, crystalline powder which is slightly soluble in water and saline. Fluconazole for oral suspension USP contains 1400 mg of fluconazole and the following inactive ingredients: sodium benzoate, citric acid anhydrous, sodium citrate dihydrate, xanthan gum, titanium dioxide, colloidal silicon dioxide, and sucrose. After reconstitution with 24 mL of distilled water or Purified Water (USP), each mL of reconstituted suspension contains 40 mg of fluconazole.</Description>
</NDC>
<NDC>
<NDCCode>14335-030-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (14335-030-01) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0030-01</NDC11Code>
<ProductNDC>14335-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ganciclovir</ProprietaryName>
<NonProprietaryName>Ganciclovir Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENTRICULAR</RouteName>
<StartMarketingDate>20190211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204204</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>GANCICLOVIR SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],DNA Polymerase Inhibitors [MoA],Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ganciclovir for Injection, USP is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for the: 1 treatment of CMV retinitis in immunocompromised adult patients, including patients with acquired immunodeficiency syndrome (AIDS). ( 1.1) , 2 prevention of CMV disease in adult transplant recipients at risk for CMV disease. ( 1.2) .</IndicationAndUsage>
<Description>Ganciclovir for injection contains ganciclovir, in the form of the sodium salt for intravenous injection. Ganciclovir is a synthetic guanine derivative active against cytomegalovirus (CMV). Chemically, ganciclovir is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine and ganciclovir sodium is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine, monosodium salt. The chemical structures of ganciclovir sodium and ganciclovir are. Ganciclovir is a white to off-white crystalline powder. Ganciclovir is a polar hydrophilic compound with a solubility of 2.6 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.022. The pK as for ganciclovir are 2.2 and 9.4. Ganciclovir for injection (ganciclovir), formulated as monosodium salt, using sodium hydroxide as a salt forming agent, is a sterile white to off-white lyophilized powder. The lyophilized powder has an aqueous solubility of greater than 50 mg/mL at 25°C. At physiological pH, ganciclovir sodium exists as the un-ionized form with a solubility of approximately 6 mg/mL at 37°C. Each vial contains ganciclovir sodium equivalent to 500 mg ganciclovir. Inactive ingredients may include hydrochloric acid (QS) and sodium hydroxide (QS) added to adjust the pH. All doses in this package insert are specified in terms of ganciclovir.</Description>
</NDC>
<NDC>
<NDCCode>14335-030-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (14335-030-25) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0030-25</NDC11Code>
<ProductNDC>14335-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ganciclovir</ProprietaryName>
<NonProprietaryName>Ganciclovir Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENTRICULAR</RouteName>
<StartMarketingDate>20190211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204204</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>GANCICLOVIR SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],DNA Polymerase Inhibitors [MoA],Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ganciclovir for Injection, USP is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for the: 1 treatment of CMV retinitis in immunocompromised adult patients, including patients with acquired immunodeficiency syndrome (AIDS). ( 1.1) , 2 prevention of CMV disease in adult transplant recipients at risk for CMV disease. ( 1.2) .</IndicationAndUsage>
<Description>Ganciclovir for injection contains ganciclovir, in the form of the sodium salt for intravenous injection. Ganciclovir is a synthetic guanine derivative active against cytomegalovirus (CMV). Chemically, ganciclovir is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine and ganciclovir sodium is 9-[[2-hydroxy-1-(hydroxymethyl)-ethoxy]methyl]guanine, monosodium salt. The chemical structures of ganciclovir sodium and ganciclovir are. Ganciclovir is a white to off-white crystalline powder. Ganciclovir is a polar hydrophilic compound with a solubility of 2.6 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.022. The pK as for ganciclovir are 2.2 and 9.4. Ganciclovir for injection (ganciclovir), formulated as monosodium salt, using sodium hydroxide as a salt forming agent, is a sterile white to off-white lyophilized powder. The lyophilized powder has an aqueous solubility of greater than 50 mg/mL at 25°C. At physiological pH, ganciclovir sodium exists as the un-ionized form with a solubility of approximately 6 mg/mL at 37°C. Each vial contains ganciclovir sodium equivalent to 500 mg ganciclovir. Inactive ingredients may include hydrochloric acid (QS) and sodium hydroxide (QS) added to adjust the pH. All doses in this package insert are specified in terms of ganciclovir.</Description>
</NDC>
<NDC>
<NDCCode>14335-050-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (14335-050-10) > 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>14335-0050-10</NDC11Code>
<ProductNDC>14335-050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209781</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam is indicated for adjunctive therapy, as an alternative when oral administration is temporarily not feasible, in the treatment of: 1 Partial onset seizures in patients 1 month of age and older with epilepsy ( 1.1) , 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy ( 1.2) , 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy ( 1.3) .</IndicationAndUsage>
<Description>Levetiracetam injection is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-use 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [ see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>14335-060-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (14335-060-01) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0060-01</NDC11Code>
<ProductNDC>14335-060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Sodium</ProprietaryName>
<NonProprietaryName>Esomeprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215732</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>ESOMEPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole sodium for injection is a proton pump inhibitor (PPI) indicated for the: 1 Short-term treatment of Gastroesophageal Reflux Disease (GERD) with erosive esophagitis (EE) in adults and pediatric patients 1 month to 17 years of age, as an alternative to oral therapy when oral esomeprazole is not possible or appropriate. (1.1), 2 Risk reduction of rebleeding of gastric or duodenal ulcers following therapeutic endoscopy for acute bleeding gastric or duodenal ulcers in adults. (1.2).</IndicationAndUsage>
<Description>The active ingredient in esomeprazole sodium for injection is ( S)-5-methoxy-2[[(4-methoxy-3,5- dimethyl-2-pyridinyl)-methyl]sulfinyl]-1 H-benzimidazole sodium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. Its empirical formula is C 17H 18N 3O 3SNa with molecular weight of 367.4 g/mol (sodium salt) and 345.4 g/mol (parent compound). Esomeprazole sodium is very soluble in water and freely soluble in ethanol (95%). The structural formula is:. Esomeprazole sodium for injection is supplied as a sterile, lyophilized, white to off-white, porous cake or powder in a 5 mL single-dose vial, intended for intravenous administration after reconstitution with 0.9% Sodium Chloride Injection, USP; Lactated Ringer’s Injection, USP or 5% Dextrose Injection, USP. Esomeprazole sodium for injection contains 40 mg esomeprazole (equivalent to 42.5 mg esomeprazole sodium), edetate disodium 1.5 mg and sodium hydroxide q.s. for pH adjustment. The pH of reconstituted solution of esomeprazole sodium for injection depends on the reconstitution volume and is in the pH range of 9 to 11. The stability of esomeprazole sodium in aqueous solution is strongly pH dependent. The rate of degradation increases with decreasing pH.</Description>
</NDC>
<NDC>
<NDCCode>14335-070-01</NDCCode>
<PackageDescription>10 mL in 1 VIAL (14335-070-01) </PackageDescription>
<NDC11Code>14335-0070-01</NDC11Code>
<ProductNDC>14335-070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eptifibatide</ProprietaryName>
<NonProprietaryName>Eptifibatide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209864</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>EPTIFIBATIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
<Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of eptifibatide injection and each 100-mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
</NDC>
<NDC>
<NDCCode>14335-130-03</NDCCode>
<PackageDescription>10 kg in 1 DRUM (14335-130-03) </PackageDescription>
<NDC11Code>14335-0130-03</NDC11Code>
<ProductNDC>14335-130</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240531</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>kg/10kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-11-21</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>31-MAY-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14335-270-01</NDCCode>
<PackageDescription>10 kg in 1 DRUM (14335-270-01) </PackageDescription>
<NDC11Code>14335-0270-01</NDC11Code>
<ProductNDC>14335-270</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14335-330-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (14335-330-10) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>14335-0330-10</NDC11Code>
<ProductNDC>14335-330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217311</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide Injection is indicated for: 1 Treatment of partial-onset seizures in patients 4 years of age and older ( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>14335-380-01</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (14335-380-01) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>14335-0380-01</NDC11Code>
<ProductNDC>14335-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oseltamivir Phosphate</ProprietaryName>
<NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218009</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oseltamivir phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. ( 1.1) , 2 Prophylaxis of influenza A and B in patients 1 year and older. ( 1.2) .</IndicationAndUsage>
<Description>Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI), is available as: 1 Capsules containing 75 mg of oseltamivir for oral use, in the form of oseltamivir phosphate.</Description>
</NDC>
<NDC>
<NDCCode>14335-420-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (14335-420-10) / 5 mL in 1 VIAL, GLASS (14335-420-01) </PackageDescription>
<NDC11Code>14335-0420-10</NDC11Code>
<ProductNDC>14335-420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218249</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1 H-pyrrol-1-yl] butanamide. Its molecular formula is C 11H 20N 2O 2and its molecular weight is 212.29. The chemical structure is:. Brivaracetam is a white to off-white crystalline powder. It is very soluble in water, buffer (pH 1.2, 4.5, and 7.4), ethanol, methanol, and glacial acetic acid. It is freely soluble in acetonitrile and acetone and soluble in toluene. It is very slightly soluble in n-hexane.</Description>
</NDC>
<NDC>
<NDCCode>14335-430-10</NDCCode>
<PackageDescription>3 mL in 1 VIAL, GLASS (14335-430-10) </PackageDescription>
<NDC11Code>14335-0430-10</NDC11Code>
<ProductNDC>14335-430</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218253</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] .</Description>
</NDC>
<NDC>
<NDCCode>14335-431-10</NDCCode>
<PackageDescription>9 mL in 1 VIAL, GLASS (14335-431-10) </PackageDescription>
<NDC11Code>14335-0431-10</NDC11Code>
<ProductNDC>14335-431</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218253</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] .</Description>
</NDC>
<NDC>
<NDCCode>14335-432-10</NDCCode>
<PackageDescription>18 mL in 1 VIAL, GLASS (14335-432-10) </PackageDescription>
<NDC11Code>14335-0432-10</NDC11Code>
<ProductNDC>14335-432</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218253</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)] . Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection, USP contains amiodarone hydrochloride, USP (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the Amiodarone Hydrochloride Injection, USP formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP is injection administration. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)] .</Description>
</NDC>
<NDC>
<NDCCode>14335-441-01</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (14335-441-01) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>14335-0441-01</NDC11Code>
<ProductNDC>14335-441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218412</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine hydrochloride injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9H 14ClNO 2with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>14335-442-01</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (14335-442-01) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>14335-0442-01</NDC11Code>
<ProductNDC>14335-442</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218412</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine hydrochloride injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9H 14ClNO 2with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride injection, USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>14335-470-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (14335-470-10) / 25 mL in 1 VIAL, SINGLE-DOSE (14335-470-01) </PackageDescription>
<NDC11Code>14335-0470-10</NDC11Code>
<ProductNDC>14335-470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218632</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>14335-471-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (14335-471-10) / 50 mL in 1 VIAL, SINGLE-DOSE (14335-471-01) </PackageDescription>
<NDC11Code>14335-0471-10</NDC11Code>
<ProductNDC>14335-471</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218632</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>14335-472-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (14335-472-10) / 100 mL in 1 VIAL, SINGLE-DOSE (14335-472-01) </PackageDescription>
<NDC11Code>14335-0472-10</NDC11Code>
<ProductNDC>14335-472</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218632</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards.The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol. 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol. 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>14335-730-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (14335-730-10) / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>14335-0730-10</NDC11Code>
<ProductNDC>14335-730</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220043</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Voriconazole injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis ( 1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candidainfections ( 1.2) , 3 Esophageal candidiasis ( 1.3) , 4 Serious fungal infections caused by Scedosporium apiospermumand Fusariumspecies including Fusarium solani, in patients intolerant of, or refractory to, other therapy ( 1.4) .</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as a sterile, clear, colorless solution for intravenous infusion. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C 16H 14F 3N 5O and a molecular weight of 349.3. Voriconazole drug substance is a white to light-colored powder. Voriconazole injection is a solution containing nominally 200 mg/20 mL (10 mg/mL) of voriconazole and 3,200 mg/20 mL (160 mg/mL) of sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. The solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)] .</Description>
</NDC>
<NDC>
<NDCCode>14335-071-01</NDCCode>
<PackageDescription>100 mL in 1 VIAL (14335-071-01) </PackageDescription>
<NDC11Code>14335-0071-01</NDC11Code>
<ProductNDC>14335-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eptifibatide</ProprietaryName>
<NonProprietaryName>Eptifibatide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209864</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>EPTIFIBATIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
<Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of eptifibatide injection and each 100-mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
</NDC>
<NDC>
<NDCCode>14335-080-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (14335-080-01) > 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>14335-0080-01</NDC11Code>
<ProductNDC>14335-080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211661</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 2C9 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>14335-130-01</NDCCode>
<PackageDescription>1.5 kg in 1 BOX (14335-130-01) </PackageDescription>
<NDC11Code>14335-0130-01</NDC11Code>
<ProductNDC>14335-130</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-12-07</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14335-130-02</NDCCode>
<PackageDescription>2 kg in 1 BOX (14335-130-02) </PackageDescription>
<NDC11Code>14335-0130-02</NDC11Code>
<ProductNDC>14335-130</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-12-07</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14335-132-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (14335-132-01) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0132-01</NDC11Code>
<ProductNDC>14335-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Nitroprusside</ProprietaryName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215846</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).</IndicationAndUsage>
<Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>14335-133-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (14335-133-01) > 100 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0133-01</NDC11Code>
<ProductNDC>14335-133</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Nitroprusside</ProprietaryName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215846</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).</IndicationAndUsage>
<Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>14335-134-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (14335-134-01) > 100 mL in 1 VIAL</PackageDescription>
<NDC11Code>14335-0134-01</NDC11Code>
<ProductNDC>14335-134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Nitroprusside</ProprietaryName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215846</ApplicationNumber>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for. Immediate reduction of blood pressure ( 1.1). Producing controlled hypotension to reduce bleeding during surgery. ( 1.2). Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure. ( 1.3).</IndicationAndUsage>
<Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has molecular formula Na 2[Fe(CN) 5NO] 2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration ( 2.1)] . Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>14335-140-01</NDCCode>
<PackageDescription>2.5 kg in 1 BOTTLE (14335-140-01) </PackageDescription>
<NDC11Code>14335-0140-01</NDC11Code>
<ProductNDC>14335-140</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Esomeprazole Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>ESOMEPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14335-150-01</NDCCode>
<PackageDescription>8 kg in 1 DRUM (14335-150-01) </PackageDescription>
<NDC11Code>14335-0150-01</NDC11Code>
<ProductNDC>14335-150</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Acyclovir Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hainan Poly Pharm. Co., Ltd.</LabelerName>
<SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-21</StartMarketingDatePackage>
</NDC>
</NDCList>