{
"NDC": [
{
"NDCCode": "14537-824-10",
"PackageDescription": "6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "14537-0824-10",
"ProductNDC": "14537-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-966-10",
"PackageDescription": "6 POUCH in 1 CASE (14537-966-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "14537-0966-10",
"ProductNDC": "14537-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "As",
"ProprietaryNameSuffix": "3",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .588; .276",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"Description": "Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container."
},
{
"NDCCode": "10135-824-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-10) ",
"NDC11Code": "10135-0824-10",
"ProductNDC": "10135-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "16571-824-10",
"PackageDescription": "1000 TABLET, CHEWABLE in 1 BOTTLE (16571-824-10) ",
"NDC11Code": "16571-0824-10",
"ProductNDC": "16571-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Meclizine Hcl",
"NonProprietaryName": "Meclizine Hydrochloride Chewable",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20220818",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M009.50",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2024-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220818",
"SamplePackage": "N",
"IndicationAndUsage": "prevents and treats nausea, vomiting or dizziness due to motion sickness."
},
{
"NDCCode": "42291-824-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (42291-824-10) ",
"NDC11Code": "42291-0824-10",
"ProductNDC": "42291-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207427",
"LabelerName": "AvKARE",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251103",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24."
},
{
"NDCCode": "43744-824-10",
"PackageDescription": "1 g in 1 DRUM (43744-824-10)",
"NDC11Code": "43744-0824-10",
"ProductNDC": "43744-824",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rifampin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20111010",
"EndMarketingDate": "20130630",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "RIFAMPIN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130630"
},
{
"NDCCode": "43744-824-15",
"PackageDescription": "10 g in 1 DRUM (43744-824-15)",
"NDC11Code": "43744-0824-15",
"ProductNDC": "43744-824",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rifampin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20111010",
"EndMarketingDate": "20130630",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "RIFAMPIN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130630"
},
{
"NDCCode": "50383-824-21",
"PackageDescription": "4 TRAY in 1 CASE (50383-824-21) > 10 CUP, UNIT-DOSE in 1 TRAY > 20 mL in 1 CUP, UNIT-DOSE (50383-824-20) ",
"NDC11Code": "50383-0824-21",
"ProductNDC": "50383-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19971229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074650",
"LabelerName": "Akorn Operating Company LLC",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "200; 40",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Sulfonamide Antimicrobial [EPC], Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20141224",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections: For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media: For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim oral suspension in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim oral suspension is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults: For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when a physician deems that sulfamethoxazole and trimethoprim oral suspension offer some advantage over the use of a single antimicrobial agent. Shigellosis: For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Jiroveci Pneumonia: For the treatment of documented Pneumocystis jiroveci pneumonia and for prophylaxis against Pneumocystis jiroveci pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis jiroveci pneumonia. Traveler’s Diarrhea In Adults: For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.",
"Description": "Sulfamethoxazole and trimethoprim oral suspension is a synthetic antibacterial combination product available for oral administration, with each teaspoonful (5 mL) containing 200 mg sulfamethoxazole and 40 mg trimethoprim. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and the following structural formula. Inactive ingredients: alcohol 0.26%, methylparaben 0.1% and sodium benzoate 0.1% (added as preservatives), carboxymethylcellulose sodium, citric acid (anhydrous), glycerin, microcrystalline cellulose, polysorbate 80, purified water, saccharin sodium, and sorbitol. The light purple, grape flavored suspension contains the following additional inactive ingredients: FD&C Red No. 40, FD&C Blue No. 1 and natural and artificial grape flavor. The pink, cherry flavored suspension contains the following additional inactive ingredients: FD&C Red No. 40, FD&C Yellow No. 6 and artificial cherry flavor."
},
{
"NDCCode": "58602-824-08",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (58602-824-08) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "58602-0824-08",
"ProductNDC": "58602-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206941",
"LabelerName": "Aurohealth LLC",
"SubstanceName": "GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "600; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170317",
"SamplePackage": "N"
},
{
"NDCCode": "58602-824-67",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (58602-824-67) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "58602-0824-67",
"ProductNDC": "58602-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206941",
"LabelerName": "Aurohealth LLC",
"SubstanceName": "GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "600; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170317",
"SamplePackage": "N"
},
{
"NDCCode": "60687-824-08",
"PackageDescription": "3 TRAY in 1 CASE (60687-824-08) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-824-48) / 10 mL in 1 CUP, UNIT-DOSE (60687-824-42) ",
"NDC11Code": "60687-0824-08",
"ProductNDC": "60687-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rufinamide",
"NonProprietaryName": "Rufinamide",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20260106",
"EndMarketingDate": "20270531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207363",
"LabelerName": "American Health Packaging",
"SubstanceName": "RUFINAMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260106",
"EndMarketingDatePackage": "20270531",
"SamplePackage": "N",
"IndicationAndUsage": "Rufinamide is indicated for adjunctive treatment of seizures associated with Lennox-Gastaut Syndrome in pediatric patients 1 year of age and older and in adults.",
"Description": "Rufinamide is a triazole derivative structurally unrelated to currently marketed antiepileptic drugs (AEDs). Rufinamide has the chemical name 1-[(2,6-difluorophenyl)methyl]-1 H-1,2,3-triazole-4 carboxamide. It has an empirical formula of C 10H 8F 2N 4O and a molecular weight of 238.20. The drug substance is a white crystalline powder. Rufinamide is practically insoluble in water, slightly soluble in tetrahydrofuran and in methanol, and very slightly soluble in ethanol and in acetonitrile. Rufinamide Oral Suspension is available for oral administration as a liquid containing rufinamide, USP at a concentration of 40 mg/mL. Inactive ingredients include: anhydrous citric acid, hydroxyethyl cellulose, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, poloxamer, potassium sorbate, propylene glycol, propylparaben, purified water, simethicone emulsion, sodium hydroxide, sorbitol solution and orange flavoring."
},
{
"NDCCode": "63187-824-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (63187-824-10) ",
"NDC11Code": "63187-0824-10",
"ProductNDC": "63187-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201278",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2022-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171201",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve oxycodone and acetaminophen tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride, USP………..……... 5 mg*(*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone). Acetaminophen, USP……………………..…. 325 mg. Oxycodone Hydrochloride, USP……………. 7.5 mg*(*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone). Acetaminophen, USP………………………. 325 mg. Oxycodone Hydrochloride, USP……………. 10 mg*(*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone). Acetaminophen, USP………………………. 325 mg. Inactive Ingredients. The tablets contain: pregelatinized corn starch, crospovidone, povidone, magnesium stearate, colloidal silicon dioxide and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxy-dihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. Oxycodone and Acetaminophen Tablets, USP, contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula."
},
{
"NDCCode": "63323-824-76",
"PackageDescription": "10 BAG in 1 CASE (63323-824-76) / 1000 mL in 1 BAG (63323-824-26) ",
"NDC11Code": "63323-0824-76",
"ProductNDC": "63323-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209448",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment."
},
{
"NDCCode": "65841-824-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (65841-824-10) ",
"NDC11Code": "65841-0824-10",
"ProductNDC": "65841-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyburide And Metformin Hydrochloride",
"NonProprietaryName": "Glyburide And Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206748",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "GLYBURIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1.25; 250",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160407",
"SamplePackage": "N",
"IndicationAndUsage": "Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin)."
},
{
"NDCCode": "65841-824-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65841-824-77) / 10 TABLET in 1 BLISTER PACK (65841-824-30) ",
"NDC11Code": "65841-0824-77",
"ProductNDC": "65841-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyburide And Metformin Hydrochloride",
"NonProprietaryName": "Glyburide And Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206748",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "GLYBURIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1.25; 250",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160407",
"SamplePackage": "N",
"IndicationAndUsage": "Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin)."
},
{
"NDCCode": "67457-824-99",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (67457-824-99) / 30 mL in 1 VIAL, SINGLE-DOSE (67457-824-15) ",
"NDC11Code": "67457-0824-99",
"ProductNDC": "67457-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181206",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209481",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181206",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2, 5, 24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l, 6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 256 mg, 769 mg, 1.28 g, 1.54 g, 1.79 g or 2.05 g of vancomycin hydrochloride, USP equivalent to 250 mg, 750 mg, 1.25 g, 1.5 g, 1.75 g or 2 g of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "68382-824-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68382-824-10) ",
"NDC11Code": "68382-0824-10",
"ProductNDC": "68382-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Carbonate",
"NonProprietaryName": "Sevelamer Carbonate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207759",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SEVELAMER CARBONATE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200917",
"SamplePackage": "N",
"IndicationAndUsage": "Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.",
"Description": "Sevelamer carbonate is a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate-binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N'-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are castor oil, colloidal silicon dioxide, crospovidone, dibutyl sebacate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, purified water and triacetin. The tablet is printed with black pharmaceutical ink which contains ferrosoferric oxide, propylene glycol and shellac."
},
{
"NDCCode": "68382-824-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-824-77) / 10 TABLET, FILM COATED in 1 BLISTER PACK (68382-824-30) ",
"NDC11Code": "68382-0824-77",
"ProductNDC": "68382-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Carbonate",
"NonProprietaryName": "Sevelamer Carbonate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207759",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SEVELAMER CARBONATE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200917",
"SamplePackage": "N",
"IndicationAndUsage": "Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.",
"Description": "Sevelamer carbonate is a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate-binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N'-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are castor oil, colloidal silicon dioxide, crospovidone, dibutyl sebacate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, purified water and triacetin. The tablet is printed with black pharmaceutical ink which contains ferrosoferric oxide, propylene glycol and shellac."
},
{
"NDCCode": "71205-824-10",
"PackageDescription": "10 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-824-10) ",
"NDC11Code": "71205-0824-10",
"ProductNDC": "71205-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride Extended-release",
"NonProprietaryName": "Potassium Chloride Extended-release",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214452",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230807",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. 1. For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia. 2. For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium salts in patients receiving diuretics for uncomplicated essential hypertension is often unnecessary when such patients have a normal dietary pattern and when low doses of the diuretic are used. Serum potassium should be checked periodically, however, and if hypokalemia occurs, dietary supplementation with potassium-containing foods may be adequate to control milder cases. In more severe cases, and if dose adjustment of the diuretic is ineffective or unwarranted, supplementation with potassium salts may be indicated.",
"Description": "Potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride extended release tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride extended release tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride extended release tablets begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP Inactive Ingredients: croscarmellose sodium, ethyl cellulose, hydroxypropyl cellulose, microcrystalline cellulose and talc. FDA approved acceptance criteria for assay differs from USP test. FDA approved dissolution test specifications differs from USP test."
},
{
"NDCCode": "14537-091-40",
"PackageDescription": "40 BAG in 1 BOX (14537-091-40) / 100 mL in 1 BAG",
"NDC11Code": "14537-0091-40",
"ProductNDC": "14537-091",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"StartMarketingDate": "20200626",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-095-50",
"PackageDescription": "50 BAG in 1 BOX (14537-095-50) / 50 mL in 1 BAG",
"NDC11Code": "14537-0095-50",
"ProductNDC": "14537-095",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"StartMarketingDate": "20210326",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "meq/50mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-096-40",
"PackageDescription": "40 BAG in 1 BOX (14537-096-40) / 100 mL in 1 BAG",
"NDC11Code": "14537-0096-40",
"ProductNDC": "14537-096",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"StartMarketingDate": "20210326",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "meq/100mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-826-20",
"PackageDescription": "30 BAG in 1 CARTON (14537-826-20) / 200 mL in 1 BAG",
"NDC11Code": "14537-0826-20",
"ProductNDC": "14537-826",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-828-35",
"PackageDescription": "24 BAG in 1 CARTON (14537-828-35) / 350 mL in 1 BAG",
"NDC11Code": "14537-0828-35",
"ProductNDC": "14537-828",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-832-03",
"PackageDescription": "6 POUCH in 1 CASE (14537-832-03) / 6 BAG in 1 POUCH (14537-832-01) / 100 mL in 1 BAG (14537-832-00) ",
"NDC11Code": "14537-0832-03",
"ProductNDC": "14537-832",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE",
"StrengthNumber": "1.1; .59; .41; .28; .042; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-833-03",
"PackageDescription": "30 BAG in 1 CASE (14537-833-03) / 200 mL in 1 BAG (14537-833-00) ",
"NDC11Code": "14537-0833-03",
"ProductNDC": "14537-833",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE",
"StrengthNumber": "1.1; .59; .41; .28; .042; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-834-03",
"PackageDescription": "24 BAG in 1 CASE (14537-834-03) / 350 mL in 1 BAG (14537-834-00) ",
"NDC11Code": "14537-0834-03",
"ProductNDC": "14537-834",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "0338-0194-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0194-04) / 2000 mL in 1 BAG (0338-0194-01) ",
"NDC11Code": "00338-0194-04",
"ProductNDC": "0338-0194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0210-06",
"PackageDescription": "6 BAG in 1 CARTON (0338-0210-06) / 1000 mL in 1 BAG (0338-0210-01) ",
"NDC11Code": "00338-0210-06",
"ProductNDC": "0338-0210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0214-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0214-04) / 2000 mL in 1 BAG (0338-0214-01) ",
"NDC11Code": "00338-0214-04",
"ProductNDC": "0338-0214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>14537-824-10</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0824-10</NDC11Code>
<ProductNDC>14537-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-966-10</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (14537-966-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0966-10</NDC11Code>
<ProductNDC>14537-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>As</ProprietaryName>
<ProprietaryNameSuffix>3</ProprietaryNameSuffix>
<NonProprietaryName>Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .588; .276</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container.</Description>
</NDC>
<NDC>
<NDCCode>10135-824-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-10) </PackageDescription>
<NDC11Code>10135-0824-10</NDC11Code>
<ProductNDC>10135-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>16571-824-10</NDCCode>
<PackageDescription>1000 TABLET, CHEWABLE in 1 BOTTLE (16571-824-10) </PackageDescription>
<NDC11Code>16571-0824-10</NDC11Code>
<ProductNDC>16571-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hcl</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride Chewable</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220818</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M009.50</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>prevents and treats nausea, vomiting or dizziness due to motion sickness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42291-824-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (42291-824-10) </PackageDescription>
<NDC11Code>42291-0824-10</NDC11Code>
<ProductNDC>42291-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207427</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24.</Description>
</NDC>
<NDC>
<NDCCode>43744-824-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-824-10)</PackageDescription>
<NDC11Code>43744-0824-10</NDC11Code>
<ProductNDC>43744-824</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rifampin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20111010</StartMarketingDate>
<EndMarketingDate>20130630</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>RIFAMPIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130630</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-824-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-824-15)</PackageDescription>
<NDC11Code>43744-0824-15</NDC11Code>
<ProductNDC>43744-824</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rifampin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20111010</StartMarketingDate>
<EndMarketingDate>20130630</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>RIFAMPIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130630</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50383-824-21</NDCCode>
<PackageDescription>4 TRAY in 1 CASE (50383-824-21) > 10 CUP, UNIT-DOSE in 1 TRAY > 20 mL in 1 CUP, UNIT-DOSE (50383-824-20) </PackageDescription>
<NDC11Code>50383-0824-21</NDC11Code>
<ProductNDC>50383-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19971229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074650</ApplicationNumber>
<LabelerName>Akorn Operating Company LLC</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>200; 40</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Sulfonamide Antimicrobial [EPC], Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections: For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media: For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim oral suspension in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim oral suspension is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults: For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when a physician deems that sulfamethoxazole and trimethoprim oral suspension offer some advantage over the use of a single antimicrobial agent. Shigellosis: For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Jiroveci Pneumonia: For the treatment of documented Pneumocystis jiroveci pneumonia and for prophylaxis against Pneumocystis jiroveci pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis jiroveci pneumonia. Traveler’s Diarrhea In Adults: For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim oral suspension is a synthetic antibacterial combination product available for oral administration, with each teaspoonful (5 mL) containing 200 mg sulfamethoxazole and 40 mg trimethoprim. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and the following structural formula. Inactive ingredients: alcohol 0.26%, methylparaben 0.1% and sodium benzoate 0.1% (added as preservatives), carboxymethylcellulose sodium, citric acid (anhydrous), glycerin, microcrystalline cellulose, polysorbate 80, purified water, saccharin sodium, and sorbitol. The light purple, grape flavored suspension contains the following additional inactive ingredients: FD&C Red No. 40, FD&C Blue No. 1 and natural and artificial grape flavor. The pink, cherry flavored suspension contains the following additional inactive ingredients: FD&C Red No. 40, FD&C Yellow No. 6 and artificial cherry flavor.</Description>
</NDC>
<NDC>
<NDCCode>58602-824-08</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (58602-824-08) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>58602-0824-08</NDC11Code>
<ProductNDC>58602-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin And Dextromethorphan Hbr</ProprietaryName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206941</ApplicationNumber>
<LabelerName>Aurohealth LLC</LabelerName>
<SubstanceName>GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>600; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58602-824-67</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (58602-824-67) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>58602-0824-67</NDC11Code>
<ProductNDC>58602-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin And Dextromethorphan Hbr</ProprietaryName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206941</ApplicationNumber>
<LabelerName>Aurohealth LLC</LabelerName>
<SubstanceName>GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>600; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60687-824-08</NDCCode>
<PackageDescription>3 TRAY in 1 CASE (60687-824-08) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-824-48) / 10 mL in 1 CUP, UNIT-DOSE (60687-824-42) </PackageDescription>
<NDC11Code>60687-0824-08</NDC11Code>
<ProductNDC>60687-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rufinamide</ProprietaryName>
<NonProprietaryName>Rufinamide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260106</StartMarketingDate>
<EndMarketingDate>20270531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207363</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>RUFINAMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260106</StartMarketingDatePackage>
<EndMarketingDatePackage>20270531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rufinamide is indicated for adjunctive treatment of seizures associated with Lennox-Gastaut Syndrome in pediatric patients 1 year of age and older and in adults.</IndicationAndUsage>
<Description>Rufinamide is a triazole derivative structurally unrelated to currently marketed antiepileptic drugs (AEDs). Rufinamide has the chemical name 1-[(2,6-difluorophenyl)methyl]-1 H-1,2,3-triazole-4 carboxamide. It has an empirical formula of C 10H 8F 2N 4O and a molecular weight of 238.20. The drug substance is a white crystalline powder. Rufinamide is practically insoluble in water, slightly soluble in tetrahydrofuran and in methanol, and very slightly soluble in ethanol and in acetonitrile. Rufinamide Oral Suspension is available for oral administration as a liquid containing rufinamide, USP at a concentration of 40 mg/mL. Inactive ingredients include: anhydrous citric acid, hydroxyethyl cellulose, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, poloxamer, potassium sorbate, propylene glycol, propylparaben, purified water, simethicone emulsion, sodium hydroxide, sorbitol solution and orange flavoring.</Description>
</NDC>
<NDC>
<NDCCode>63187-824-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (63187-824-10) </PackageDescription>
<NDC11Code>63187-0824-10</NDC11Code>
<ProductNDC>63187-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201278</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2022-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve oxycodone and acetaminophen tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride, USP………..……... 5 mg*(*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone). Acetaminophen, USP……………………..…. 325 mg. Oxycodone Hydrochloride, USP……………. 7.5 mg*(*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone). Acetaminophen, USP………………………. 325 mg. Oxycodone Hydrochloride, USP……………. 10 mg*(*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone). Acetaminophen, USP………………………. 325 mg. Inactive Ingredients. The tablets contain: pregelatinized corn starch, crospovidone, povidone, magnesium stearate, colloidal silicon dioxide and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxy-dihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. Oxycodone and Acetaminophen Tablets, USP, contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>63323-824-76</NDCCode>
<PackageDescription>10 BAG in 1 CASE (63323-824-76) / 1000 mL in 1 BAG (63323-824-26) </PackageDescription>
<NDC11Code>63323-0824-76</NDC11Code>
<ProductNDC>63323-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209448</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.</Description>
</NDC>
<NDC>
<NDCCode>65841-824-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (65841-824-10) </PackageDescription>
<NDC11Code>65841-0824-10</NDC11Code>
<ProductNDC>65841-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyburide And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Glyburide And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206748</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>GLYBURIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25; 250</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin).</Description>
</NDC>
<NDC>
<NDCCode>65841-824-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65841-824-77) / 10 TABLET in 1 BLISTER PACK (65841-824-30) </PackageDescription>
<NDC11Code>65841-0824-77</NDC11Code>
<ProductNDC>65841-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyburide And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Glyburide And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206748</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>GLYBURIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25; 250</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin).</Description>
</NDC>
<NDC>
<NDCCode>67457-824-99</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (67457-824-99) / 30 mL in 1 VIAL, SINGLE-DOSE (67457-824-15) </PackageDescription>
<NDC11Code>67457-0824-99</NDC11Code>
<ProductNDC>67457-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181206</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209481</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2, 5, 24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l, 6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 256 mg, 769 mg, 1.28 g, 1.54 g, 1.79 g or 2.05 g of vancomycin hydrochloride, USP equivalent to 250 mg, 750 mg, 1.25 g, 1.5 g, 1.75 g or 2 g of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>68382-824-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68382-824-10) </PackageDescription>
<NDC11Code>68382-0824-10</NDC11Code>
<ProductNDC>68382-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Carbonate</ProprietaryName>
<NonProprietaryName>Sevelamer Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207759</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SEVELAMER CARBONATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.</IndicationAndUsage>
<Description>Sevelamer carbonate is a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate-binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N'-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are castor oil, colloidal silicon dioxide, crospovidone, dibutyl sebacate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, purified water and triacetin. The tablet is printed with black pharmaceutical ink which contains ferrosoferric oxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68382-824-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-824-77) / 10 TABLET, FILM COATED in 1 BLISTER PACK (68382-824-30) </PackageDescription>
<NDC11Code>68382-0824-77</NDC11Code>
<ProductNDC>68382-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Carbonate</ProprietaryName>
<NonProprietaryName>Sevelamer Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207759</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SEVELAMER CARBONATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.</IndicationAndUsage>
<Description>Sevelamer carbonate is a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate-binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N'-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are castor oil, colloidal silicon dioxide, crospovidone, dibutyl sebacate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, purified water and triacetin. The tablet is printed with black pharmaceutical ink which contains ferrosoferric oxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>71205-824-10</NDCCode>
<PackageDescription>10 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-824-10) </PackageDescription>
<NDC11Code>71205-0824-10</NDC11Code>
<ProductNDC>71205-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride Extended-release</ProprietaryName>
<NonProprietaryName>Potassium Chloride Extended-release</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214452</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. 1. For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia. 2. For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium salts in patients receiving diuretics for uncomplicated essential hypertension is often unnecessary when such patients have a normal dietary pattern and when low doses of the diuretic are used. Serum potassium should be checked periodically, however, and if hypokalemia occurs, dietary supplementation with potassium-containing foods may be adequate to control milder cases. In more severe cases, and if dose adjustment of the diuretic is ineffective or unwarranted, supplementation with potassium salts may be indicated.</IndicationAndUsage>
<Description>Potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride extended release tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride extended release tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride extended release tablets begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP Inactive Ingredients: croscarmellose sodium, ethyl cellulose, hydroxypropyl cellulose, microcrystalline cellulose and talc. FDA approved acceptance criteria for assay differs from USP test. FDA approved dissolution test specifications differs from USP test.</Description>
</NDC>
<NDC>
<NDCCode>14537-091-40</NDCCode>
<PackageDescription>40 BAG in 1 BOX (14537-091-40) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0091-40</NDC11Code>
<ProductNDC>14537-091</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<StartMarketingDate>20200626</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-095-50</NDCCode>
<PackageDescription>50 BAG in 1 BOX (14537-095-50) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0095-50</NDC11Code>
<ProductNDC>14537-095</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<StartMarketingDate>20210326</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>meq/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-096-40</NDCCode>
<PackageDescription>40 BAG in 1 BOX (14537-096-40) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0096-40</NDC11Code>
<ProductNDC>14537-096</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<StartMarketingDate>20210326</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>meq/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-826-20</NDCCode>
<PackageDescription>30 BAG in 1 CARTON (14537-826-20) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0826-20</NDC11Code>
<ProductNDC>14537-826</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-828-35</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (14537-828-35) / 350 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0828-35</NDC11Code>
<ProductNDC>14537-828</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-832-03</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (14537-832-03) / 6 BAG in 1 POUCH (14537-832-01) / 100 mL in 1 BAG (14537-832-00) </PackageDescription>
<NDC11Code>14537-0832-03</NDC11Code>
<ProductNDC>14537-832</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>1.1; .59; .41; .28; .042; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-833-03</NDCCode>
<PackageDescription>30 BAG in 1 CASE (14537-833-03) / 200 mL in 1 BAG (14537-833-00) </PackageDescription>
<NDC11Code>14537-0833-03</NDC11Code>
<ProductNDC>14537-833</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>1.1; .59; .41; .28; .042; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-834-03</NDCCode>
<PackageDescription>24 BAG in 1 CASE (14537-834-03) / 350 mL in 1 BAG (14537-834-00) </PackageDescription>
<NDC11Code>14537-0834-03</NDC11Code>
<ProductNDC>14537-834</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>0338-0194-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0194-04) / 2000 mL in 1 BAG (0338-0194-01) </PackageDescription>
<NDC11Code>00338-0194-04</NDC11Code>
<ProductNDC>0338-0194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0210-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0338-0210-06) / 1000 mL in 1 BAG (0338-0210-01) </PackageDescription>
<NDC11Code>00338-0210-06</NDC11Code>
<ProductNDC>0338-0210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0214-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0214-04) / 2000 mL in 1 BAG (0338-0214-01) </PackageDescription>
<NDC11Code>00338-0214-04</NDC11Code>
<ProductNDC>0338-0214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
</NDCList>