{
"NDC": [
{
"NDCCode": "14537-966-10",
"PackageDescription": "6 POUCH in 1 CASE (14537-966-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "14537-0966-10",
"ProductNDC": "14537-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "As",
"ProprietaryNameSuffix": "3",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .588; .276",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"Description": "Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container."
},
{
"NDCCode": "14537-824-10",
"PackageDescription": "6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "14537-0824-10",
"ProductNDC": "14537-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-966-20",
"PackageDescription": "30 BAG in 1 CASE (14537-966-20) / 200 mL in 1 BAG",
"NDC11Code": "14537-0966-20",
"ProductNDC": "14537-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "As",
"ProprietaryNameSuffix": "3",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .588; .276",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"Description": "Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container."
},
{
"NDCCode": "52584-966-04",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (52584-966-04) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "52584-0966-04",
"ProductNDC": "52584-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bacteriastatic Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018800",
"LabelerName": "General Injectables & Vaccines, Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "52584-966-12",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (52584-966-12) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "52584-0966-12",
"ProductNDC": "52584-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bacteriostatic Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100601",
"EndMarketingDate": "20240101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018800",
"LabelerName": "General Injectables & Vaccines, Inc.",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100601",
"EndMarketingDatePackage": "20240101",
"SamplePackage": "N"
},
{
"NDCCode": "54458-966-10",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (54458-966-10) ",
"NDC11Code": "54458-0966-10",
"ProductNDC": "54458-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "International Laboratories, LLC",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20090206",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)].",
"Description": "Glimepiride tablets USP, are an oral sulfonylurea that contains the active ingredient glimepiride USP. Chemically, glimepiride USP is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white to almost white powder, soluble in dimethyl formamide, sparingly soluble in methylene chloride, practically insoluble in water. The structural formula is. Glimepiride tablets meets USP drug release test 2. Glimepiride tablets USP, contain the active ingredient glimepiride USP and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake)."
},
{
"NDCCode": "54575-966-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-966-10)",
"NDC11Code": "54575-0966-10",
"ProductNDC": "54575-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Privet Pollen",
"NonProprietaryName": "Ligustrum Vulgare Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "LIGUSTRUM VULGARE POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "59651-966-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (59651-966-10) ",
"NDC11Code": "59651-0966-10",
"ProductNDC": "59651-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075211",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250911",
"SamplePackage": "N",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir tablets are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpes viruses. Acyclovir tablets are formulation for oral administration. Each 400 mg tablet contains 400 mg of acyclovir, USP and the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. Each 800 mg tablet contains 800 mg of acyclovir, USP and the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. Acyclovir, USP is a white to off-white, crystalline powder with a molecular formula C8H11N5O3 and a molecular weight of 225. Slightly soluble in water, soluble in diluted hydrochloric acid, insoluble in alcohol. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
},
{
"NDCCode": "59676-966-01",
"PackageDescription": "1 VIAL in 1 CARTON (59676-966-01) > 10 mL in 1 VIAL",
"NDC11Code": "59676-0966-01",
"ProductNDC": "59676-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride Liposome",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTION, SUSPENSION, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170626",
"EndMarketingDate": "20201031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050718",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [CS],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170626",
"EndMarketingDatePackage": "20200930",
"SamplePackage": "N"
},
{
"NDCCode": "60429-966-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE, PLASTIC (60429-966-10) ",
"NDC11Code": "60429-0966-10",
"ProductNDC": "60429-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19860513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070791",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180205",
"SamplePackage": "N",
"IndicationAndUsage": "Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.",
"Description": "Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b, e]oxepin-11 (6 H)ylidene- N, N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg, 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow No. 6 and the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green No. 3. The imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "14537-091-40",
"PackageDescription": "40 BAG in 1 BOX (14537-091-40) / 100 mL in 1 BAG",
"NDC11Code": "14537-0091-40",
"ProductNDC": "14537-091",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"StartMarketingDate": "20200626",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-095-50",
"PackageDescription": "50 BAG in 1 BOX (14537-095-50) / 50 mL in 1 BAG",
"NDC11Code": "14537-0095-50",
"ProductNDC": "14537-095",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"StartMarketingDate": "20210326",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "meq/50mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-096-40",
"PackageDescription": "40 BAG in 1 BOX (14537-096-40) / 100 mL in 1 BAG",
"NDC11Code": "14537-0096-40",
"ProductNDC": "14537-096",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"StartMarketingDate": "20210326",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Terumo BCT Ltd.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "meq/100mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "11-JAN-23"
},
{
"NDCCode": "14537-826-20",
"PackageDescription": "30 BAG in 1 CARTON (14537-826-20) / 200 mL in 1 BAG",
"NDC11Code": "14537-0826-20",
"ProductNDC": "14537-826",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-828-35",
"PackageDescription": "24 BAG in 1 CARTON (14537-828-35) / 350 mL in 1 BAG",
"NDC11Code": "14537-0828-35",
"ProductNDC": "14537-828",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-832-03",
"PackageDescription": "6 POUCH in 1 CASE (14537-832-03) / 6 BAG in 1 POUCH (14537-832-01) / 100 mL in 1 BAG (14537-832-00) ",
"NDC11Code": "14537-0832-03",
"ProductNDC": "14537-832",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE",
"StrengthNumber": "1.1; .59; .41; .28; .042; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-833-03",
"PackageDescription": "30 BAG in 1 CASE (14537-833-03) / 200 mL in 1 BAG (14537-833-00) ",
"NDC11Code": "14537-0833-03",
"ProductNDC": "14537-833",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE",
"StrengthNumber": "1.1; .59; .41; .28; .042; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14537-834-03",
"PackageDescription": "24 BAG in 1 CASE (14537-834-03) / 350 mL in 1 BAG (14537-834-00) ",
"NDC11Code": "14537-0834-03",
"ProductNDC": "14537-834",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "16590-966-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-30)",
"NDC11Code": "16590-0966-30",
"ProductNDC": "16590-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074862",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose."
},
{
"NDCCode": "16590-966-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-60)",
"NDC11Code": "16590-0966-60",
"ProductNDC": "16590-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074862",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose."
},
{
"NDCCode": "16590-966-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-90)",
"NDC11Code": "16590-0966-90",
"ProductNDC": "16590-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074862",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose."
},
{
"NDCCode": "21695-966-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-966-30)",
"NDC11Code": "21695-0966-30",
"ProductNDC": "21695-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090528",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Losartan Potassium and Hydrochlorothiazide Tablets are indicated for the treatment of hypertension. This fixed dose combination is not indicated for initial therapy of hypertension, except when the hypertension is severe enough that the value of achieving prompt blood pressure control exceeds the risk of initiating combination therapy in these patients (see CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, and DOSAGE AND ADMINISTRATION). Hypertensive Patients with Left Ventricular Hypertrophy. Losartan Potassium and Hydrochlorothiazide Tablets are indicated to reduce the risk of stroke in patients with hypertension and left ventricular hypertrophy, but there is evidence that this benefit does not apply to Black patients. (See PRECAUTIONS, Race, CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, Losartan Potassium, Reduction in the Risk of Stroke, Race, and DOSAGE AND ADMINISTRATION).",
"Description": "Losartan Potassium and Hydrochlorothiazide 50 mg/12.5 mg, Losartan Potassium and Hydrochlorothiazide 100 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide 100 mg/25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan Potassium and Hydrochlorothiazide Tablets, USP are available for oral administration in three tablet combinations of losartan and hydrochlorothiazide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg also contain D&C yellow No. 10 lake. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium."
},
{
"NDCCode": "30142-966-47",
"PackageDescription": "150 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (30142-966-47) ",
"NDC11Code": "30142-0966-47",
"ProductNDC": "30142-966",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arthritis Pain Relief",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075077",
"LabelerName": "Kroger Company",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "650",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20080311",
"SamplePackage": "N"
},
{
"NDCCode": "41163-966-48",
"PackageDescription": "258 g in 1 CAN (41163-966-48) ",
"NDC11Code": "41163-0966-48",
"ProductNDC": "41163-966",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equaline Sport Continuous Sunscreen Spf 50",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201014",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "United Natural Foods, Inc. dba UNFI",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 100; 50; 40",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201014",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "41163-966-63",
"PackageDescription": "2 CAN in 1 PACKAGE (41163-966-63) / 156 g in 1 CAN (41163-966-37) ",
"NDC11Code": "41163-0966-63",
"ProductNDC": "41163-966",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equaline Sport Continuous Sunscreen Spf 50",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201014",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "United Natural Foods, Inc. dba UNFI",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 100; 50; 40",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201014",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "41250-966-47",
"PackageDescription": "150 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (41250-966-47) ",
"NDC11Code": "41250-0966-47",
"ProductNDC": "41250-966",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arthritis Pain Relief",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075077",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "650",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2022-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070905",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:. minor pain of arthritis. muscular aches. backache. premenstrual and menstrual cramps. the common cold. headache. toothache. temporarily reduces fever."
},
{
"NDCCode": "43353-966-45",
"PackageDescription": "45 TABLET in 1 BOTTLE (43353-966-45) ",
"NDC11Code": "43353-0966-45",
"ProductNDC": "43353-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077793",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140930",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.",
"Description": "Pravastatin sodium, USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium, USP is designated chemically as 1-naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α (βS*,δS*),2α,6α,8β(R*),8aα]]-. It has the following structural formula. C23H35NaO7 M.W. 446.52. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets USP are available for oral administration as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: calcium phosphate dibasic anhydrous, croscarmellose sodium, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and sodium stearyl fumarate. Additionally, the 10 mg tablet contains ferric oxide red; the 20 mg tablet contains ferric oxide yellow; and the 40 mg tablet contains FD&C Blue No. 1 Aluminum Lake and Yellow D&C No. 10; Also available for oral administration as 80 mg tablets. Inactive ingredients include: calcium phosphate dibasic, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and the 80 mg tablet contains magnesium stearate."
},
{
"NDCCode": "43353-966-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-966-60) ",
"NDC11Code": "43353-0966-60",
"ProductNDC": "43353-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077793",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.",
"Description": "Pravastatin sodium, USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium, USP is designated chemically as 1-naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α (βS*,δS*),2α,6α,8β(R*),8aα]]-. It has the following structural formula. C23H35NaO7 M.W. 446.52. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets USP are available for oral administration as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: calcium phosphate dibasic anhydrous, croscarmellose sodium, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and sodium stearyl fumarate. Additionally, the 10 mg tablet contains ferric oxide red; the 20 mg tablet contains ferric oxide yellow; and the 40 mg tablet contains FD&C Blue No. 1 Aluminum Lake and Yellow D&C No. 10; Also available for oral administration as 80 mg tablets. Inactive ingredients include: calcium phosphate dibasic, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and the 80 mg tablet contains magnesium stearate."
},
{
"NDCCode": "43598-966-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-966-05) ",
"NDC11Code": "43598-0966-05",
"ProductNDC": "43598-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206383",
"LabelerName": "Dr.Reddy�s Laboratories Inc",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200316",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Irritability Associated with Autistic Disorder, 3 Treatment of Tourette’s Disorder.",
"Description": "Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C 23H 27Cl 2N 3O 2and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43598-966-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-966-30) ",
"NDC11Code": "43598-0966-30",
"ProductNDC": "43598-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206383",
"LabelerName": "Dr.Reddy�s Laboratories Inc",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200316",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Irritability Associated with Autistic Disorder, 3 Treatment of Tourette’s Disorder.",
"Description": "Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C 23H 27Cl 2N 3O 2and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>14537-966-10</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (14537-966-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0966-10</NDC11Code>
<ProductNDC>14537-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>As</ProprietaryName>
<ProprietaryNameSuffix>3</ProprietaryNameSuffix>
<NonProprietaryName>Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .588; .276</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container.</Description>
</NDC>
<NDC>
<NDCCode>14537-824-10</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0824-10</NDC11Code>
<ProductNDC>14537-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-966-20</NDCCode>
<PackageDescription>30 BAG in 1 CASE (14537-966-20) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0966-20</NDC11Code>
<ProductNDC>14537-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>As</ProprietaryName>
<ProprietaryNameSuffix>3</ProprietaryNameSuffix>
<NonProprietaryName>Dextrose Monohydrate, Sodium Citrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate And Adenine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM CITRATE, UNSPECIFIED FORM; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .588; .276</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Intended for use only with Trima and Trima Accel automated red blood cell apheresis devices and Atreus Whole Blood Processing System. See Operator's Manuals for additional information and complete usage instructions. Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx only. Single use container.</Description>
</NDC>
<NDC>
<NDCCode>52584-966-04</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (52584-966-04) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>52584-0966-04</NDC11Code>
<ProductNDC>52584-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bacteriastatic Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018800</ApplicationNumber>
<LabelerName>General Injectables & Vaccines, Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>52584-966-12</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (52584-966-12) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>52584-0966-12</NDC11Code>
<ProductNDC>52584-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bacteriostatic Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100601</StartMarketingDate>
<EndMarketingDate>20240101</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018800</ApplicationNumber>
<LabelerName>General Injectables & Vaccines, Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100601</StartMarketingDatePackage>
<EndMarketingDatePackage>20240101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54458-966-10</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (54458-966-10) </PackageDescription>
<NDC11Code>54458-0966-10</NDC11Code>
<ProductNDC>54458-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>International Laboratories, LLC</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)].</IndicationAndUsage>
<Description>Glimepiride tablets USP, are an oral sulfonylurea that contains the active ingredient glimepiride USP. Chemically, glimepiride USP is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white to almost white powder, soluble in dimethyl formamide, sparingly soluble in methylene chloride, practically insoluble in water. The structural formula is. Glimepiride tablets meets USP drug release test 2. Glimepiride tablets USP, contain the active ingredient glimepiride USP and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake).</Description>
</NDC>
<NDC>
<NDCCode>54575-966-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-966-10)</PackageDescription>
<NDC11Code>54575-0966-10</NDC11Code>
<ProductNDC>54575-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Privet Pollen</ProprietaryName>
<NonProprietaryName>Ligustrum Vulgare Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>LIGUSTRUM VULGARE POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>59651-966-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (59651-966-10) </PackageDescription>
<NDC11Code>59651-0966-10</NDC11Code>
<ProductNDC>59651-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075211</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpes viruses. Acyclovir tablets are formulation for oral administration. Each 400 mg tablet contains 400 mg of acyclovir, USP and the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. Each 800 mg tablet contains 800 mg of acyclovir, USP and the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. Acyclovir, USP is a white to off-white, crystalline powder with a molecular formula C8H11N5O3 and a molecular weight of 225. Slightly soluble in water, soluble in diluted hydrochloric acid, insoluble in alcohol. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>59676-966-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (59676-966-01) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>59676-0966-01</NDC11Code>
<ProductNDC>59676-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride Liposome</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170626</StartMarketingDate>
<EndMarketingDate>20201031</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050718</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [CS],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170626</StartMarketingDatePackage>
<EndMarketingDatePackage>20200930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60429-966-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE, PLASTIC (60429-966-10) </PackageDescription>
<NDC11Code>60429-0966-10</NDC11Code>
<ProductNDC>60429-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19860513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070791</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
<Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b, e]oxepin-11 (6 H)ylidene- N, N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg, 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow No. 6 and the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green No. 3. The imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>14537-091-40</NDCCode>
<PackageDescription>40 BAG in 1 BOX (14537-091-40) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0091-40</NDC11Code>
<ProductNDC>14537-091</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<StartMarketingDate>20200626</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-095-50</NDCCode>
<PackageDescription>50 BAG in 1 BOX (14537-095-50) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0095-50</NDC11Code>
<ProductNDC>14537-095</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<StartMarketingDate>20210326</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>meq/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-096-40</NDCCode>
<PackageDescription>40 BAG in 1 BOX (14537-096-40) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0096-40</NDC11Code>
<ProductNDC>14537-096</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<StartMarketingDate>20210326</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Terumo BCT Ltd.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>meq/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>11-JAN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14537-826-20</NDCCode>
<PackageDescription>30 BAG in 1 CARTON (14537-826-20) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0826-20</NDC11Code>
<ProductNDC>14537-826</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-828-35</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (14537-828-35) / 350 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0828-35</NDC11Code>
<ProductNDC>14537-828</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-832-03</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (14537-832-03) / 6 BAG in 1 POUCH (14537-832-01) / 100 mL in 1 BAG (14537-832-00) </PackageDescription>
<NDC11Code>14537-0832-03</NDC11Code>
<ProductNDC>14537-832</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>1.1; .59; .41; .28; .042; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-833-03</NDCCode>
<PackageDescription>30 BAG in 1 CASE (14537-833-03) / 200 mL in 1 BAG (14537-833-00) </PackageDescription>
<NDC11Code>14537-0833-03</NDC11Code>
<ProductNDC>14537-833</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; CITRIC ACID MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>1.1; .59; .41; .28; .042; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14537-834-03</NDCCode>
<PackageDescription>24 BAG in 1 CASE (14537-834-03) / 350 mL in 1 BAG (14537-834-00) </PackageDescription>
<NDC11Code>14537-0834-03</NDC11Code>
<ProductNDC>14537-834</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>16590-966-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-30)</PackageDescription>
<NDC11Code>16590-0966-30</NDC11Code>
<ProductNDC>16590-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074862</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose.</Description>
</NDC>
<NDC>
<NDCCode>16590-966-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-60)</PackageDescription>
<NDC11Code>16590-0966-60</NDC11Code>
<ProductNDC>16590-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074862</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose.</Description>
</NDC>
<NDC>
<NDCCode>16590-966-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-966-90)</PackageDescription>
<NDC11Code>16590-0966-90</NDC11Code>
<ProductNDC>16590-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074862</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine Sulfate Extended-Release Tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine Sulfate Extended-Release Tablets are NOT intended for use as a prn analgesic. The Morphine Sulfate Extended-Release Tablets 100 and 200 mg tablet strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the immediate postoperative period (the first 12-24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine Sulfate Extended-Release Tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine Sulfate Extended-Release Tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (see American Pain Society guidelines.).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine Sulfate Extended-Release Tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine Sulfate Extended-Release Tablets 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg contain the following inactive ingredients: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. Morphine Sulfate Extended-Release Tablets 15 mg also contains FD&C Blue No. 2, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 30 mg also contains D&C Red No. 7, FD&C Blue No. 1, lactose and polysorbate 80. Morphine Sulfate Extended-Release Tablets 60 mg also contains D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, and lactose. Morphine Sulfate Extended-Release Tablets 100 mg also contains black iron oxide. Morphine Sulfate Extended-Release Tablets 200 mg also contains D&C Yellow No. 10, FD&C Blue No. 1, and hydroxypropyl cellulose.</Description>
</NDC>
<NDC>
<NDCCode>21695-966-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-966-30)</PackageDescription>
<NDC11Code>21695-0966-30</NDC11Code>
<ProductNDC>21695-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090528</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Losartan Potassium and Hydrochlorothiazide Tablets are indicated for the treatment of hypertension. This fixed dose combination is not indicated for initial therapy of hypertension, except when the hypertension is severe enough that the value of achieving prompt blood pressure control exceeds the risk of initiating combination therapy in these patients (see CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, and DOSAGE AND ADMINISTRATION). Hypertensive Patients with Left Ventricular Hypertrophy. Losartan Potassium and Hydrochlorothiazide Tablets are indicated to reduce the risk of stroke in patients with hypertension and left ventricular hypertrophy, but there is evidence that this benefit does not apply to Black patients. (See PRECAUTIONS, Race, CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, Losartan Potassium, Reduction in the Risk of Stroke, Race, and DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Losartan Potassium and Hydrochlorothiazide 50 mg/12.5 mg, Losartan Potassium and Hydrochlorothiazide 100 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide 100 mg/25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan Potassium and Hydrochlorothiazide Tablets, USP are available for oral administration in three tablet combinations of losartan and hydrochlorothiazide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg also contain D&C yellow No. 10 lake. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium.</Description>
</NDC>
<NDC>
<NDCCode>30142-966-47</NDCCode>
<PackageDescription>150 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (30142-966-47) </PackageDescription>
<NDC11Code>30142-0966-47</NDC11Code>
<ProductNDC>30142-966</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arthritis Pain Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075077</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>650</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>41163-966-48</NDCCode>
<PackageDescription>258 g in 1 CAN (41163-966-48) </PackageDescription>
<NDC11Code>41163-0966-48</NDC11Code>
<ProductNDC>41163-966</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equaline Sport Continuous Sunscreen Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201014</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>United Natural Foods, Inc. dba UNFI</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 100; 50; 40</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41163-966-63</NDCCode>
<PackageDescription>2 CAN in 1 PACKAGE (41163-966-63) / 156 g in 1 CAN (41163-966-37) </PackageDescription>
<NDC11Code>41163-0966-63</NDC11Code>
<ProductNDC>41163-966</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equaline Sport Continuous Sunscreen Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201014</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>United Natural Foods, Inc. dba UNFI</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 100; 50; 40</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-966-47</NDCCode>
<PackageDescription>150 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (41250-966-47) </PackageDescription>
<NDC11Code>41250-0966-47</NDC11Code>
<ProductNDC>41250-966</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arthritis Pain Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075077</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>650</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:. minor pain of arthritis. muscular aches. backache. premenstrual and menstrual cramps. the common cold. headache. toothache. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43353-966-45</NDCCode>
<PackageDescription>45 TABLET in 1 BOTTLE (43353-966-45) </PackageDescription>
<NDC11Code>43353-0966-45</NDC11Code>
<ProductNDC>43353-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077793</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.</IndicationAndUsage>
<Description>Pravastatin sodium, USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium, USP is designated chemically as 1-naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α (βS*,δS*),2α,6α,8β(R*),8aα]]-. It has the following structural formula. C23H35NaO7 M.W. 446.52. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets USP are available for oral administration as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: calcium phosphate dibasic anhydrous, croscarmellose sodium, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and sodium stearyl fumarate. Additionally, the 10 mg tablet contains ferric oxide red; the 20 mg tablet contains ferric oxide yellow; and the 40 mg tablet contains FD&C Blue No. 1 Aluminum Lake and Yellow D&C No. 10; Also available for oral administration as 80 mg tablets. Inactive ingredients include: calcium phosphate dibasic, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and the 80 mg tablet contains magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43353-966-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-966-60) </PackageDescription>
<NDC11Code>43353-0966-60</NDC11Code>
<ProductNDC>43353-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077793</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.</IndicationAndUsage>
<Description>Pravastatin sodium, USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium, USP is designated chemically as 1-naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α (βS*,δS*),2α,6α,8β(R*),8aα]]-. It has the following structural formula. C23H35NaO7 M.W. 446.52. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets USP are available for oral administration as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: calcium phosphate dibasic anhydrous, croscarmellose sodium, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and sodium stearyl fumarate. Additionally, the 10 mg tablet contains ferric oxide red; the 20 mg tablet contains ferric oxide yellow; and the 40 mg tablet contains FD&C Blue No. 1 Aluminum Lake and Yellow D&C No. 10; Also available for oral administration as 80 mg tablets. Inactive ingredients include: calcium phosphate dibasic, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone and the 80 mg tablet contains magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43598-966-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-966-05) </PackageDescription>
<NDC11Code>43598-0966-05</NDC11Code>
<ProductNDC>43598-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206383</ApplicationNumber>
<LabelerName>Dr.Reddy�s Laboratories Inc</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Irritability Associated with Autistic Disorder, 3 Treatment of Tourette’s Disorder.</IndicationAndUsage>
<Description>Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C 23H 27Cl 2N 3O 2and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-966-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-966-30) </PackageDescription>
<NDC11Code>43598-0966-30</NDC11Code>
<ProductNDC>43598-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206383</ApplicationNumber>
<LabelerName>Dr.Reddy�s Laboratories Inc</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Irritability Associated with Autistic Disorder, 3 Treatment of Tourette’s Disorder.</IndicationAndUsage>
<Description>Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C 23H 27Cl 2N 3O 2and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>