{
"NDC": [
{
"NDCCode": "14539-673-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (14539-673-06) ",
"NDC11Code": "14539-0673-06",
"ProductNDC": "14539-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.",
"Description": "Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide."
},
{
"NDCCode": "14539-703-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (14539-703-06) ",
"NDC11Code": "14539-0703-06",
"ProductNDC": "14539-703",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-08-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240816",
"SamplePackage": "N"
},
{
"NDCCode": "14539-704-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (14539-704-06) ",
"NDC11Code": "14539-0704-06",
"ProductNDC": "14539-704",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "375",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-08-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240816",
"SamplePackage": "N"
},
{
"NDCCode": "14539-673-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (14539-673-01) ",
"NDC11Code": "14539-0673-01",
"ProductNDC": "14539-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.",
"Description": "Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide."
},
{
"NDCCode": "14539-673-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (14539-673-05) ",
"NDC11Code": "14539-0673-05",
"ProductNDC": "14539-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.",
"Description": "Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide."
},
{
"NDCCode": "23155-673-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (23155-673-06) ",
"NDC11Code": "23155-0673-06",
"ProductNDC": "23155-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-06-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N"
},
{
"NDCCode": "51079-673-06",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-673-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-673-01)",
"NDC11Code": "51079-0673-06",
"ProductNDC": "51079-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065195",
"LabelerName": "UDL Laboratories, Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-03-18"
},
{
"NDCCode": "65841-673-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (65841-673-06) ",
"NDC11Code": "65841-0673-06",
"ProductNDC": "65841-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077653",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080613",
"SamplePackage": "N"
},
{
"NDCCode": "68001-673-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (68001-673-06) ",
"NDC11Code": "68001-0673-06",
"ProductNDC": "68001-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abiraterone",
"NonProprietaryName": "Abiraterone Acetate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210686",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "ABIRATERONE ACETATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251016",
"SamplePackage": "N",
"IndicationAndUsage": "Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).",
"Description": "Abiraterone acetate, the active ingredient of abiraterone acetate tablets USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet USP contains 250 mg or 500 mg of abiraterone acetate. Abiraterone is designated chemically as 17-(Pyridin-3-yl)androsta-5,16-dien-3β-yl acetate and its structure is. Abiraterone acetate is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C 26H 33NO 2and it has a molecular weight of 391.55. Abiraterone acetate is a lipophilic compound with an octanol-water partition coefficient of 3.57 (Log P) and Freely soluble in methylene chloride, in tetrahydrofuran, and in toluene, soluble in methanol, in ethanol, in ethyl acetate, in isobutyl methyl ketone, in N,N-dimethyl formamide and in acetone, sparingly soluble in acetonitrile and in dimethyl sulfoxide, slightly soluble in hexane, very slightly soluble in 0.1N hydrochloride and practically insoluble in water. The pKa value of abiraterone Acetate is 3.06. Abiraterone acetate tablets USP are available in 500 mg film-coated tablets and 250 mg uncoated tablets with the following inactive ingredients: : 1 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The film-coating contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide., 2 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulphate."
},
{
"NDCCode": "68180-673-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (68180-673-06) ",
"NDC11Code": "68180-0673-06",
"ProductNDC": "68180-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208031",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230220",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, polyethylene glycol and titanium dioxide. Additionally, the 80 mg tablet contains iron oxide yellow and FD & C Blue No. 2 aluminum lake."
},
{
"NDCCode": "68428-673-06",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (68428-673-06) ",
"NDC11Code": "68428-0673-06",
"ProductNDC": "68428-673",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Theridion",
"NonProprietaryName": "Theridion Curassavicum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100922",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "THERIDION CURASSAVICUM",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100922",
"SamplePackage": "N"
},
{
"NDCCode": "71205-673-06",
"PackageDescription": "6 CAPSULE in 1 BOTTLE (71205-673-06) ",
"NDC11Code": "71205-0673-06",
"ProductNDC": "71205-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzonatate",
"NonProprietaryName": "Benzonatate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211518",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "BENZONATATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Tracheobronchial Stretch Receptor Activity [PE], Non-narcotic Antitussive [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220701",
"SamplePackage": "N",
"IndicationAndUsage": "Benzonatate capsules is indicated for the symptomatic relief of cough.",
"Description": "Benzonatate, a non-narcotic oral antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26-nonaoxaoctacosan-28-yl p-(butylamino) benzoate; with a molecular weight of 603.7. Each benzonatate capsule USP contains. Benzonatate, USP 200 mg. Benzonatate capsules USP also contain: bloom gelatin, glycerin, purified water, medium chain triglycerides, lecithin, isopropyl alcohol, nitrogen. 200 mg capsules also contain D&C Yellow No. 10. Each capsule also contains black iron oxide, propylene glycol, hypromellose as imprinting ink."
},
{
"NDCCode": "0990-4179-05",
"PackageDescription": "6 BAG in 1 CASE (0990-4179-05) / 1000 mL in 1 BAG",
"NDC11Code": "00990-4179-05",
"ProductNDC": "0990-4179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn-pf",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019492",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE",
"StrengthNumber": "760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 10% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.",
"Description": "Aminosyn®-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn-PF 10% is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulation is described below. The formulas for the individual amino acids present in Aminosyn-PF 10% are as follows:. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture."
},
{
"NDCCode": "23155-673-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (23155-673-01) ",
"NDC11Code": "23155-0673-01",
"ProductNDC": "23155-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-06-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N"
},
{
"NDCCode": "23155-673-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (23155-673-05) ",
"NDC11Code": "23155-0673-05",
"ProductNDC": "23155-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202845",
"LabelerName": "Heritage Pharmaceuticals Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-06-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190109",
"SamplePackage": "N"
},
{
"NDCCode": "25021-673-76",
"PackageDescription": "10 SYRINGE in 1 CARTON (25021-673-76) / 6 mL in 1 SYRINGE",
"NDC11Code": "25021-0673-76",
"ProductNDC": "25021-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glydo",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "JELLY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201094",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140915",
"SamplePackage": "N",
"IndicationAndUsage": "GLYDO (lidocaine HCl jelly) 2% is an amide local anesthetic indicated: : 1 for prevention and control of pain in procedures involving the male and female urethra , 2 for topical treatment of painful urethritis , 3 as an anesthetic lubricant for oral and nasal endotracheal intubation .",
"Description": "GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, the molecular weight is 270.8. The molecular formula is C14H23ClN2O, and has the following structural formula:. GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of GLYDO (lidocaine HCl jelly, USP) 2% 6 mL or 11 mL syringes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0."
},
{
"NDCCode": "25021-673-77",
"PackageDescription": "10 SYRINGE in 1 CARTON (25021-673-77) / 11 mL in 1 SYRINGE",
"NDC11Code": "25021-0673-77",
"ProductNDC": "25021-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glydo",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "JELLY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201094",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140915",
"SamplePackage": "N",
"IndicationAndUsage": "GLYDO (lidocaine HCl jelly) 2% is an amide local anesthetic indicated: : 1 for prevention and control of pain in procedures involving the male and female urethra , 2 for topical treatment of painful urethritis , 3 as an anesthetic lubricant for oral and nasal endotracheal intubation .",
"Description": "GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, the molecular weight is 270.8. The molecular formula is C14H23ClN2O, and has the following structural formula:. GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of GLYDO (lidocaine HCl jelly, USP) 2% 6 mL or 11 mL syringes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0."
},
{
"NDCCode": "42291-673-25",
"PackageDescription": "255 g in 1 BOTTLE (42291-673-25) ",
"NDC11Code": "42291-0673-25",
"ProductNDC": "42291-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polyethylene Glycol 3350",
"NonProprietaryName": "Polyethylene Glycol 3350",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20130705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076652",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20130705",
"SamplePackage": "N"
},
{
"NDCCode": "42291-673-57",
"PackageDescription": "527 g in 1 BOTTLE (42291-673-57) ",
"NDC11Code": "42291-0673-57",
"ProductNDC": "42291-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polyethylene Glycol 3350",
"NonProprietaryName": "Polyethylene Glycol 3350",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20130705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076652",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20130705",
"SamplePackage": "N"
},
{
"NDCCode": "43602-673-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43602-673-10) ",
"NDC11Code": "43602-0673-10",
"ProductNDC": "43602-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa And Levodopa",
"NonProprietaryName": "Carbidopa And Levodopa",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218939",
"LabelerName": "Ascent Pharmaceuticals, Inc.",
"SubstanceName": "CARBIDOPA; LEVODOPA",
"StrengthNumber": "25; 250",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250114",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.",
"Description": "Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43602-673-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43602-673-30) ",
"NDC11Code": "43602-0673-30",
"ProductNDC": "43602-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa And Levodopa",
"NonProprietaryName": "Carbidopa And Levodopa",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218939",
"LabelerName": "Ascent Pharmaceuticals, Inc.",
"SubstanceName": "CARBIDOPA; LEVODOPA",
"StrengthNumber": "25; 250",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250114",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.",
"Description": "Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "55700-673-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55700-673-30) ",
"NDC11Code": "55700-0673-30",
"ProductNDC": "55700-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078110",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180831",
"SamplePackage": "N"
},
{
"NDCCode": "61786-673-19",
"PackageDescription": "90 TABLET in 1 BOTTLE (61786-673-19)",
"NDC11Code": "61786-0673-19",
"ProductNDC": "61786-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076939",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-06-06",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "76125-672-50",
"PackageDescription": "1 KIT in 1 CARTON (76125-672-50) * 10 mL in 1 VIAL, GLASS (13533-000-05) * 10 mL in 1 VIAL, GLASS (76125-673-51) ",
"NDC11Code": "76125-0672-50",
"ProductNDC": "76125-672",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76125-674-10",
"PackageDescription": "1 KIT in 1 CARTON (76125-674-10) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-200-10) ",
"NDC11Code": "76125-0674-10",
"ProductNDC": "76125-674",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76125-675-12",
"PackageDescription": "1 KIT in 1 CARTON (76125-675-12) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (76297-002-12) ",
"NDC11Code": "76125-0675-12",
"ProductNDC": "76125-675",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76125-676-50",
"PackageDescription": "1 KIT in 1 CARTON (76125-676-50) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-000-05) ",
"NDC11Code": "76125-0676-50",
"ProductNDC": "76125-676",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76125-678-10",
"PackageDescription": "1 KIT in 1 CARTON (76125-678-10) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-200-10) ",
"NDC11Code": "76125-0678-10",
"ProductNDC": "76125-678",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76125-679-12",
"PackageDescription": "1 KIT in 1 CARTON (76125-679-12) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (76297-002-12) ",
"NDC11Code": "76125-0679-12",
"ProductNDC": "76125-679",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Koate",
"NonProprietaryName": "Antihemophilic Factor (human)",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101130",
"LabelerName": "KEDRION BIOPHARMA, INC.",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990520",
"SamplePackage": "N",
"IndicationAndUsage": "KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.",
"Description": "KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "76282-673-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (76282-673-01) ",
"NDC11Code": "76282-0673-01",
"ProductNDC": "76282-673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramipril",
"NonProprietaryName": "Ramipril",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077900",
"LabelerName": "Exelan Pharmaceuticals, Inc.",
"SubstanceName": "RAMIPRIL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200128",
"SamplePackage": "N",
"IndicationAndUsage": "Ramipril is an angiotensin converting enzyme (ACE) inhibitor indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. It may be used alone or in combination with thiazide diuretics (1.1). In patients 55 years or older at high risk of developing a major cardiovascular event, ramipril is indicated to reduce the risk of myocardial infarction, stroke, or death from cardiovascular causes (1.2). Ramipril is indicated in stable patients who have demonstrated clinical signs of congestive heart failure post-myocardial infarction (1.3).",
"Description": "Ramipril USP is a 2‑aza‑bicyclo [3.3.0]‑octane‑3‑carboxylic acid derivative. It is a white to almost white, crystalline powder freely soluble in methanol. Ramipril melts between 105°C to 112°C. The CAS Registry Number is 87333-19-5. Ramipril's chemical name is (2S,3aS,6aS)‑1-[(S)‑N‑[(S)‑1-Carboxy‑3‑phenylpropyl]alanyl]octahydrocyclopenta[b]pyrrole‑2‑carboxylic acid, 1‑ethyl ester. Ramipril Capsules USP are available for oral administration containing either 1.25 mg, 2.5 mg, 5 mg or 10 mg ramipril USP and the following inactive ingredient: pregelatinized starch. Each capsule shell contains black monogramming ink, gelatin and titanium dioxide. The black monogramming ink contains: black iron oxide, FD&C blue #2, FD&C red #40, FD&C yellow #6, propylene glycol and shellac glaze. The 1.25 mg capsule shell contains D&C yellow #10 and FD&C yellow #6. The 2.5 mg capsule shell contains FD&C yellow #6. The 5 mg capsule shell contains D&C red #28, FD&C blue #1 and FD&C yellow #6. The 10 mg capsule shell contains D&C red #28 and FD&C blue #1. The structural formula for ramipril is. Its molecular formula is C23H32N2O5, and its molecular weight is 416.51. Ramiprilat, the diacid metabolite of ramipril, is a non‑sulfhydryl ACE inhibitor. Ramipril is converted to ramiprilat by hepatic cleavage of the ester group."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>14539-673-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (14539-673-06) </PackageDescription>
<NDC11Code>14539-0673-06</NDC11Code>
<ProductNDC>14539-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.</IndicationAndUsage>
<Description>Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>14539-703-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (14539-703-06) </PackageDescription>
<NDC11Code>14539-0703-06</NDC11Code>
<ProductNDC>14539-703</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-08-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>14539-704-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (14539-704-06) </PackageDescription>
<NDC11Code>14539-0704-06</NDC11Code>
<ProductNDC>14539-704</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>375</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-08-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>14539-673-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (14539-673-01) </PackageDescription>
<NDC11Code>14539-0673-01</NDC11Code>
<ProductNDC>14539-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.</IndicationAndUsage>
<Description>Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>14539-673-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (14539-673-05) </PackageDescription>
<NDC11Code>14539-0673-05</NDC11Code>
<ProductNDC>14539-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following: 1 Mild to moderate pain, 2 Osteoarthritis, 3 Rheumatoid arthritis.</IndicationAndUsage>
<Description>Diflunisal, USP is [1, 1'-Biphenyl]-3-carboxylic acid, 2', 4'-difluoro-4-hydroxy. Its structural formula is. Molecular Formula: C13H8F2O3. Molecular Weight: 250.20 g/mol. Diflunisal, USP is a stable, white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in water at neutral or acidic pH. Because it is an organic acid, it dissolves readily in dilute alkali to give a moderately stable solution at room temperature. It is soluble in most organic solvents including ethanol, methanol, and acetone. Each tablet, for oral administration, contains 500 mg diflunisal, USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Blue No. 2, hypromellose, microcrystalline cellulose, pregelatinized starch, propylene glycol, sodium stearyl fumarate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>23155-673-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (23155-673-06) </PackageDescription>
<NDC11Code>23155-0673-06</NDC11Code>
<ProductNDC>23155-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-673-06</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-673-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-673-01)</PackageDescription>
<NDC11Code>51079-0673-06</NDC11Code>
<ProductNDC>51079-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065195</ApplicationNumber>
<LabelerName>UDL Laboratories, Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-03-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>65841-673-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (65841-673-06) </PackageDescription>
<NDC11Code>65841-0673-06</NDC11Code>
<ProductNDC>65841-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077653</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-673-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (68001-673-06) </PackageDescription>
<NDC11Code>68001-0673-06</NDC11Code>
<ProductNDC>68001-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abiraterone</ProprietaryName>
<NonProprietaryName>Abiraterone Acetate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210686</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>ABIRATERONE ACETATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).</IndicationAndUsage>
<Description>Abiraterone acetate, the active ingredient of abiraterone acetate tablets USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet USP contains 250 mg or 500 mg of abiraterone acetate. Abiraterone is designated chemically as 17-(Pyridin-3-yl)androsta-5,16-dien-3β-yl acetate and its structure is. Abiraterone acetate is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C 26H 33NO 2and it has a molecular weight of 391.55. Abiraterone acetate is a lipophilic compound with an octanol-water partition coefficient of 3.57 (Log P) and Freely soluble in methylene chloride, in tetrahydrofuran, and in toluene, soluble in methanol, in ethanol, in ethyl acetate, in isobutyl methyl ketone, in N,N-dimethyl formamide and in acetone, sparingly soluble in acetonitrile and in dimethyl sulfoxide, slightly soluble in hexane, very slightly soluble in 0.1N hydrochloride and practically insoluble in water. The pKa value of abiraterone Acetate is 3.06. Abiraterone acetate tablets USP are available in 500 mg film-coated tablets and 250 mg uncoated tablets with the following inactive ingredients: : 1 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The film-coating contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide., 2 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulphate.</Description>
</NDC>
<NDC>
<NDCCode>68180-673-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68180-673-06) </PackageDescription>
<NDC11Code>68180-0673-06</NDC11Code>
<ProductNDC>68180-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208031</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, polyethylene glycol and titanium dioxide. Additionally, the 80 mg tablet contains iron oxide yellow and FD & C Blue No. 2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68428-673-06</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (68428-673-06) </PackageDescription>
<NDC11Code>68428-0673-06</NDC11Code>
<ProductNDC>68428-673</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Theridion</ProprietaryName>
<NonProprietaryName>Theridion Curassavicum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100922</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>THERIDION CURASSAVICUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71205-673-06</NDCCode>
<PackageDescription>6 CAPSULE in 1 BOTTLE (71205-673-06) </PackageDescription>
<NDC11Code>71205-0673-06</NDC11Code>
<ProductNDC>71205-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzonatate</ProprietaryName>
<NonProprietaryName>Benzonatate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211518</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>BENZONATATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Tracheobronchial Stretch Receptor Activity [PE], Non-narcotic Antitussive [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Benzonatate capsules is indicated for the symptomatic relief of cough.</IndicationAndUsage>
<Description>Benzonatate, a non-narcotic oral antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26-nonaoxaoctacosan-28-yl p-(butylamino) benzoate; with a molecular weight of 603.7. Each benzonatate capsule USP contains. Benzonatate, USP 200 mg. Benzonatate capsules USP also contain: bloom gelatin, glycerin, purified water, medium chain triglycerides, lecithin, isopropyl alcohol, nitrogen. 200 mg capsules also contain D&C Yellow No. 10. Each capsule also contains black iron oxide, propylene glycol, hypromellose as imprinting ink.</Description>
</NDC>
<NDC>
<NDCCode>0990-4179-05</NDCCode>
<PackageDescription>6 BAG in 1 CASE (0990-4179-05) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-4179-05</NDC11Code>
<ProductNDC>0990-4179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn-pf</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019492</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE</SubstanceName>
<StrengthNumber>760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 10% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.</IndicationAndUsage>
<Description>Aminosyn®-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn-PF 10% is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulation is described below. The formulas for the individual amino acids present in Aminosyn-PF 10% are as follows:. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture.</Description>
</NDC>
<NDC>
<NDCCode>23155-673-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (23155-673-01) </PackageDescription>
<NDC11Code>23155-0673-01</NDC11Code>
<ProductNDC>23155-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>23155-673-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (23155-673-05) </PackageDescription>
<NDC11Code>23155-0673-05</NDC11Code>
<ProductNDC>23155-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202845</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>25021-673-76</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (25021-673-76) / 6 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>25021-0673-76</NDC11Code>
<ProductNDC>25021-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glydo</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>JELLY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201094</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLYDO (lidocaine HCl jelly) 2% is an amide local anesthetic indicated: : 1 for prevention and control of pain in procedures involving the male and female urethra , 2 for topical treatment of painful urethritis , 3 as an anesthetic lubricant for oral and nasal endotracheal intubation .</IndicationAndUsage>
<Description>GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, the molecular weight is 270.8. The molecular formula is C14H23ClN2O, and has the following structural formula:. GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of GLYDO (lidocaine HCl jelly, USP) 2% 6 mL or 11 mL syringes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>25021-673-77</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (25021-673-77) / 11 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>25021-0673-77</NDC11Code>
<ProductNDC>25021-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glydo</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>JELLY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201094</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLYDO (lidocaine HCl jelly) 2% is an amide local anesthetic indicated: : 1 for prevention and control of pain in procedures involving the male and female urethra , 2 for topical treatment of painful urethritis , 3 as an anesthetic lubricant for oral and nasal endotracheal intubation .</IndicationAndUsage>
<Description>GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, the molecular weight is 270.8. The molecular formula is C14H23ClN2O, and has the following structural formula:. GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of GLYDO (lidocaine HCl jelly, USP) 2% 6 mL or 11 mL syringes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>42291-673-25</NDCCode>
<PackageDescription>255 g in 1 BOTTLE (42291-673-25) </PackageDescription>
<NDC11Code>42291-0673-25</NDC11Code>
<ProductNDC>42291-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polyethylene Glycol 3350</ProprietaryName>
<NonProprietaryName>Polyethylene Glycol 3350</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076652</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42291-673-57</NDCCode>
<PackageDescription>527 g in 1 BOTTLE (42291-673-57) </PackageDescription>
<NDC11Code>42291-0673-57</NDC11Code>
<ProductNDC>42291-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polyethylene Glycol 3350</ProprietaryName>
<NonProprietaryName>Polyethylene Glycol 3350</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076652</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43602-673-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43602-673-10) </PackageDescription>
<NDC11Code>43602-0673-10</NDC11Code>
<ProductNDC>43602-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa And Levodopa</ProprietaryName>
<NonProprietaryName>Carbidopa And Levodopa</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218939</ApplicationNumber>
<LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA</SubstanceName>
<StrengthNumber>25; 250</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.</IndicationAndUsage>
<Description>Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43602-673-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43602-673-30) </PackageDescription>
<NDC11Code>43602-0673-30</NDC11Code>
<ProductNDC>43602-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa And Levodopa</ProprietaryName>
<NonProprietaryName>Carbidopa And Levodopa</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218939</ApplicationNumber>
<LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA</SubstanceName>
<StrengthNumber>25; 250</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.</IndicationAndUsage>
<Description>Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>55700-673-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55700-673-30) </PackageDescription>
<NDC11Code>55700-0673-30</NDC11Code>
<ProductNDC>55700-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078110</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61786-673-19</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (61786-673-19)</PackageDescription>
<NDC11Code>61786-0673-19</NDC11Code>
<ProductNDC>61786-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076939</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-06-06</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>76125-672-50</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-672-50) * 10 mL in 1 VIAL, GLASS (13533-000-05) * 10 mL in 1 VIAL, GLASS (76125-673-51) </PackageDescription>
<NDC11Code>76125-0672-50</NDC11Code>
<ProductNDC>76125-672</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76125-674-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-674-10) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-200-10) </PackageDescription>
<NDC11Code>76125-0674-10</NDC11Code>
<ProductNDC>76125-674</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76125-675-12</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-675-12) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (76297-002-12) </PackageDescription>
<NDC11Code>76125-0675-12</NDC11Code>
<ProductNDC>76125-675</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76125-676-50</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-676-50) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-000-05) </PackageDescription>
<NDC11Code>76125-0676-50</NDC11Code>
<ProductNDC>76125-676</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76125-678-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-678-10) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (13533-200-10) </PackageDescription>
<NDC11Code>76125-0678-10</NDC11Code>
<ProductNDC>76125-678</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76125-679-12</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76125-679-12) * 10 mL in 1 VIAL, GLASS (76125-673-51) * 10 mL in 1 VIAL, GLASS (76297-002-12) </PackageDescription>
<NDC11Code>76125-0679-12</NDC11Code>
<ProductNDC>76125-679</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Koate</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101130</ApplicationNumber>
<LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
<Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor in lyophilized powder form for reconstitution for intravenous injection. The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>76282-673-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (76282-673-01) </PackageDescription>
<NDC11Code>76282-0673-01</NDC11Code>
<ProductNDC>76282-673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramipril</ProprietaryName>
<NonProprietaryName>Ramipril</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077900</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RAMIPRIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ramipril is an angiotensin converting enzyme (ACE) inhibitor indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. It may be used alone or in combination with thiazide diuretics (1.1). In patients 55 years or older at high risk of developing a major cardiovascular event, ramipril is indicated to reduce the risk of myocardial infarction, stroke, or death from cardiovascular causes (1.2). Ramipril is indicated in stable patients who have demonstrated clinical signs of congestive heart failure post-myocardial infarction (1.3).</IndicationAndUsage>
<Description>Ramipril USP is a 2‑aza‑bicyclo [3.3.0]‑octane‑3‑carboxylic acid derivative. It is a white to almost white, crystalline powder freely soluble in methanol. Ramipril melts between 105°C to 112°C. The CAS Registry Number is 87333-19-5. Ramipril's chemical name is (2S,3aS,6aS)‑1-[(S)‑N‑[(S)‑1-Carboxy‑3‑phenylpropyl]alanyl]octahydrocyclopenta[b]pyrrole‑2‑carboxylic acid, 1‑ethyl ester. Ramipril Capsules USP are available for oral administration containing either 1.25 mg, 2.5 mg, 5 mg or 10 mg ramipril USP and the following inactive ingredient: pregelatinized starch. Each capsule shell contains black monogramming ink, gelatin and titanium dioxide. The black monogramming ink contains: black iron oxide, FD&C blue #2, FD&C red #40, FD&C yellow #6, propylene glycol and shellac glaze. The 1.25 mg capsule shell contains D&C yellow #10 and FD&C yellow #6. The 2.5 mg capsule shell contains FD&C yellow #6. The 5 mg capsule shell contains D&C red #28, FD&C blue #1 and FD&C yellow #6. The 10 mg capsule shell contains D&C red #28 and FD&C blue #1. The structural formula for ramipril is. Its molecular formula is C23H32N2O5, and its molecular weight is 416.51. Ramiprilat, the diacid metabolite of ramipril, is a non‑sulfhydryl ACE inhibitor. Ramipril is converted to ramiprilat by hepatic cleavage of the ester group.</Description>
</NDC>
</NDCList>