{
"NDC": [
{
"NDCCode": "15631-0453-0",
"PackageDescription": "100 PELLET in 1 VIAL, SINGLE-DOSE (15631-0453-0) ",
"NDC11Code": "15631-0453-00",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "54868-0453-0",
"PackageDescription": "25 TABLET, FILM COATED in 1 BOTTLE (54868-0453-0)",
"NDC11Code": "54868-0453-00",
"ProductNDC": "54868-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Premarin",
"NonProprietaryName": "Conjugated Estrogens",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA004782",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTROGENS, CONJUGATED",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen [EPC],Estrogen Receptor Agonists [MoA],Estrogens, Conjugated (USP) [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-05-14"
},
{
"NDCCode": "55545-0453-0",
"PackageDescription": "25 kg in 1 DRUM (55545-0453-0)",
"NDC11Code": "55545-0453-00",
"ProductNDC": "55545-0453",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Flurbiprofen Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "19870101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "FDC Limited",
"SubstanceName": "FLURBIPROFEN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "70518-0453-0",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-0) ",
"NDC11Code": "70518-0453-00",
"ProductNDC": "70518-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076710",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170421",
"SamplePackage": "N",
"Description": "Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients:. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. , 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide."
},
{
"NDCCode": "71335-0453-0",
"PackageDescription": "16 CAPSULE in 1 BOTTLE (71335-0453-0) ",
"NDC11Code": "71335-0453-00",
"ProductNDC": "71335-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065243",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211227",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin HCl and other antibacterial drugs, clindamycin HCl capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: 75 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Yellow No. 10, FD&C Green No. 3, and gelatin; 150 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Yellow No. 10, FD&C Green No. 3, D&C Red No. 33, FD&C Blue No. 1, titanium dioxide, and gelatin; 300 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Red No. 33, FD&C Blue No. 1, FD&C Green No. 3, titanium dioxide, and gelatin. The capsule imprinting ink contains: shellac glaze in ethanol, titanium dioxide, isopropyl alcohol, ammonium hydroxide, n-butyl alcohol, propylene glycol, and simethicone. The structural formula is represented below. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "15631-0453-1",
"PackageDescription": "200 PELLET in 1 PACKAGE (15631-0453-1) ",
"NDC11Code": "15631-0453-01",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "15631-0453-2",
"PackageDescription": "400 PELLET in 1 PACKAGE (15631-0453-2) ",
"NDC11Code": "15631-0453-02",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "15631-0453-3",
"PackageDescription": "750 PELLET in 1 PACKAGE (15631-0453-3) ",
"NDC11Code": "15631-0453-03",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "15631-0453-4",
"PackageDescription": "2500 PELLET in 1 PACKAGE (15631-0453-4) ",
"NDC11Code": "15631-0453-04",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "15631-0453-5",
"PackageDescription": "12500 PELLET in 1 PACKAGE (15631-0453-5) ",
"NDC11Code": "15631-0453-05",
"ProductNDC": "15631-0453",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Valeriana Officinalis",
"NonProprietaryName": "Valeriana Officinalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "VALERIAN",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "13668-453-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (13668-453-01) ",
"NDC11Code": "13668-0453-01",
"ProductNDC": "13668-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Anagrelide",
"NonProprietaryName": "Anagrelide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209151",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "ANAGRELIDE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Production [PE], Phosphodiesterase 3 Inhibitors [MoA], Platelet-reducing Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170630",
"SamplePackage": "N",
"IndicationAndUsage": "Anagrelide is a platelet reducing agent indicated for the treatment of thrombocythemia, secondary to myeloproliferative neoplasms, to reduce the elevated platelet count and the risk of thrombosis and to ameliorate associated symptoms including thrombo-hemorrhagic events. (1).",
"Description": "Anagrelide hydrochloride, USP is a platelet-reducing agent. Its chemical name is 6,7-dichloro-1,5 dihydroimidazo[2,1-b] quinazolin-2(3H)-one monohydrochloride monohydrate and it has the following structural formula. C 10H 7Cl 2N 3O·HCl·H 2O M.W. 310.56. Anagrelide hydrochloride, USP is a white to off white powder that is practically insoluble in water and slightly soluble in dimethyl sulfoxide and very slightly soluble in dimethylformamide. Each Anagrelide Capsule USP, for oral administration, contains either 0.5 mg or 1 mg of anagrelide as anagrelide hydrochloride, USP and has the following inactive ingredients: black iron oxide, gelatin, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, hydroxypropyl cellulose, propylene glycol, shellac and titanium dioxide, potassium hydroxide."
},
{
"NDCCode": "13668-453-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (13668-453-30) ",
"NDC11Code": "13668-0453-30",
"ProductNDC": "13668-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Anagrelide",
"NonProprietaryName": "Anagrelide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209151",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "ANAGRELIDE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Production [PE], Phosphodiesterase 3 Inhibitors [MoA], Platelet-reducing Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170630",
"SamplePackage": "N",
"IndicationAndUsage": "Anagrelide is a platelet reducing agent indicated for the treatment of thrombocythemia, secondary to myeloproliferative neoplasms, to reduce the elevated platelet count and the risk of thrombosis and to ameliorate associated symptoms including thrombo-hemorrhagic events. (1).",
"Description": "Anagrelide hydrochloride, USP is a platelet-reducing agent. Its chemical name is 6,7-dichloro-1,5 dihydroimidazo[2,1-b] quinazolin-2(3H)-one monohydrochloride monohydrate and it has the following structural formula. C 10H 7Cl 2N 3O·HCl·H 2O M.W. 310.56. Anagrelide hydrochloride, USP is a white to off white powder that is practically insoluble in water and slightly soluble in dimethyl sulfoxide and very slightly soluble in dimethylformamide. Each Anagrelide Capsule USP, for oral administration, contains either 0.5 mg or 1 mg of anagrelide as anagrelide hydrochloride, USP and has the following inactive ingredients: black iron oxide, gelatin, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, hydroxypropyl cellulose, propylene glycol, shellac and titanium dioxide, potassium hydroxide."
},
{
"NDCCode": "42291-453-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (42291-453-60) ",
"NDC11Code": "42291-0453-60",
"ProductNDC": "42291-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cilostazol",
"NonProprietaryName": "Cilostazol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077030",
"LabelerName": "AvKARE",
"SubstanceName": "CILOSTAZOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220412",
"SamplePackage": "N",
"IndicationAndUsage": "Cilostazol tablets are indicated for the reduction of symptoms of intermittent claudication, as demonstrated by an increased walking distance.",
"Description": "Cilostazol is a quinolinone derivative that inhibits cellular phosphodiesterase (more specific for phosphodiesterase III). The empirical formula of cilostazol is C 20H 27N 5O 2, and its molecular weight is 369.47. Cilostazol is 6-[4-(1-cyclohexyl-1 H-tetrazol-5-yl) butoxy]-3,4-dihydro-2(1 H)-quinolinone, CAS-73963-72-1. The structural formula is. Cilostazol occurs as white to off-white crystals or as a crystalline powder that is slightly soluble in methanol and ethanol, and is practically insoluble in water, 0.1 N HCl, and 0.1 N NaOH. Cilostazol tablets, USP for oral administration are available in 50 mg and 100 mg round, white tablets. Each tablet, in addition to the active ingredient, contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, and silicon dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "45802-453-84",
"PackageDescription": "1 TUBE in 1 CARTON (45802-453-84) / 45 g in 1 TUBE",
"NDC11Code": "45802-0453-84",
"ProductNDC": "45802-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101026",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020748",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "ADAPALENE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101027",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene Cream, 0.1% is indicated for the topical treatment of acne vulgaris.",
"Description": "Adapalene Cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.53. Adapalene is represented by the following structural formula."
},
{
"NDCCode": "49288-0453-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0453-1)",
"NDC11Code": "49288-0453-01",
"ProductNDC": "49288-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Rye Grass",
"NonProprietaryName": "Cultivated Rye Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "SECALE CEREALE POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0453-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0453-2)",
"NDC11Code": "49288-0453-02",
"ProductNDC": "49288-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Rye Grass",
"NonProprietaryName": "Cultivated Rye Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "SECALE CEREALE POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0453-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0453-3)",
"NDC11Code": "49288-0453-03",
"ProductNDC": "49288-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Rye Grass",
"NonProprietaryName": "Cultivated Rye Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "SECALE CEREALE POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0453-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0453-4)",
"NDC11Code": "49288-0453-04",
"ProductNDC": "49288-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Rye Grass",
"NonProprietaryName": "Cultivated Rye Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "SECALE CEREALE POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0453-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0453-5)",
"NDC11Code": "49288-0453-05",
"ProductNDC": "49288-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Rye Grass",
"NonProprietaryName": "Cultivated Rye Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "SECALE CEREALE POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "50419-453-04",
"PackageDescription": "4 PATCH in 1 CARTON (50419-453-04) / 7 d in 1 PATCH (50419-453-01) ",
"NDC11Code": "50419-0453-04",
"ProductNDC": "50419-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Climara",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19980323",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020375",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980323",
"SamplePackage": "N",
"IndicationAndUsage": "Climara is indicated for.",
"Description": "Climara (estradiol transdermal system), is designed to release estradiol continuously upon application to intact skin. Six (6.5, 9.375, 12.5, 15, 18.75 and 25 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 6.5, 9.375, 12.5, 15, 18.75 or 25 cm2, and contains 2, 2.85, 3.8, 4.55, 5.7 or 7.6 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17β-diol. It has an empirical formula of C18 H24 O2 and molecular weight of 272.38. The structural formula is. The Climara transdermal system comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1 A translucent polyethylene film., 2 An acrylate adhesive matrix containing estradiol USP., 3 A protective liner of siliconized or fluoropolymer-coated polyester film is attached to the adhesive surface and must be removed before the system can be used."
},
{
"NDCCode": "51079-453-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-453-20) / 1 TABLET in 1 BLISTER PACK (51079-453-01) ",
"NDC11Code": "51079-0453-20",
"ProductNDC": "51079-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midodrine Hydrochloride",
"NonProprietaryName": "Midodrine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076577",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "MIDODRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060911",
"SamplePackage": "N",
"IndicationAndUsage": "Midodrine hydrochloride tablets are indicated for the treatment of symptomatic orthostatic hypotension (OH). Because midodrine hydrochloride tablets can cause marked elevation of supine blood pressure (BP > 200 mmHg systolic), it should be used in patients whose lives are considerably impaired despite standard clinical care, including non-pharmacologic treatment (such as support stockings), fluid expansion, and lifestyle alterations. The indication is based on midodrine hydrochloride tablets' effect on increases in 1-minute standing systolic blood pressure, a surrogate marker considered likely to correspond to a clinical benefit. At present, however, clinical benefits of midodrine hydrochloride tablets, principally improved ability to perform life activities, have not been established. Further clinical trials are underway to verify and describe the clinical benefits of midodrine hydrochloride tablets. After initiation of treatment, midodrine hydrochloride tablets should be continued only for patients who report significant symptomatic improvement.",
"Description": "Midodrine hydrochloride is a vasopressor/antihypotensive. The chemical name for midodrine hydrochloride is Acetamide, 2-amino- N-[2-(2,5-dimethoxyphenyl)-2-hydroxyethyl]-, monohydrochloride, (±)-. The molecular weight of midodrine hydrochloride is 290.7. Its structural formula and molecular formula are:. Midodrine hydrochloride, USP is an odorless, white, crystalline powder. It is soluble in water and sparingly soluble in methanol and has a pKa of 7.8 (0.3% aqueous solution) and a pH of 3.5 to 5.5 (5% aqueous solution). It has a melting range of 200° to 203°C. Each midodrine hydrochloride tablet, USP for oral administration contains 2.5 mg, 5 mg or 10 mg of midodrine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate."
},
{
"NDCCode": "51407-453-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (51407-453-90) ",
"NDC11Code": "51407-0453-90",
"ProductNDC": "51407-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine",
"NonProprietaryName": "Venlafaxine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078627",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210402",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine tablets, USP is indicated for the treatment of major depressive disorder. The efficacy of venlafaxine tablets, USP in the treatment of major depressive disorder was established in 6 week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III or DSM-III-R category of major depression and in a 4 week controlled trial of inpatients meeting diagnostic criteria for major depression with melancholia (see CLINICAL TRIALS). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The efficacy of venlafaxine hydrochloride extended-release capsules in maintaining an antidepressant response for up to 26 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial. The efficacy of venlafaxine tablets, USP in maintaining an antidepressant response in patients with recurrent depression who had responded and continued to be improved during an initial 26 weeks of treatment and were then followed for a period of up to 52 weeks was demonstrated in a second placebo-controlled trial (see CLINICAL TRIALS). Nevertheless, the physician who elects to use venlafaxine tablets, USP/venlafaxine hydrochloride extended-release capsules for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Venlafaxine tablets, USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17H 27NO 2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride, USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg of venlafaxine base and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, sodium starch glycolate, iron oxide red, iron oxide yellow, colloidal silicon dioxide, and magnesium stearate."
},
{
"NDCCode": "58151-453-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (58151-453-01) ",
"NDC11Code": "58151-0453-01",
"ProductNDC": "58151-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xanax",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250710",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018276",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250710",
"SamplePackage": "N",
"IndicationAndUsage": "XANAX is indicated for the: 1 acute treatment of generalized anxiety disorder (GAD) in adults. , 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "XANAX contains alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each XANAX tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam. Inactive ingredients: cellulose, corn starch, docusate sodium, lactose, magnesium stearate, silicon dioxide and sodium benzoate. In addition, the 0.5 mg tablet contains FD&C Yellow No. 6 and the 1 mg tablet contains FD&C Blue No. 2."
},
{
"NDCCode": "58151-453-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (58151-453-05) ",
"NDC11Code": "58151-0453-05",
"ProductNDC": "58151-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xanax",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250710",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018276",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251002",
"SamplePackage": "N",
"IndicationAndUsage": "XANAX is indicated for the: 1 acute treatment of generalized anxiety disorder (GAD) in adults. , 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "XANAX contains alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each XANAX tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam. Inactive ingredients: cellulose, corn starch, docusate sodium, lactose, magnesium stearate, silicon dioxide and sodium benzoate. In addition, the 0.5 mg tablet contains FD&C Yellow No. 6 and the 1 mg tablet contains FD&C Blue No. 2."
},
{
"NDCCode": "64980-453-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (64980-453-03) ",
"NDC11Code": "64980-0453-03",
"ProductNDC": "64980-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alosetron Hydrochloride",
"NonProprietaryName": "Alosetron Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209180",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "ALOSETRON HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190114",
"SamplePackage": "N",
"IndicationAndUsage": "Alosetron hydrochloride tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer),, 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and, 3 not responded adequately to conventional therapy.",
"Description": "The active ingredient in alosetron hydrochloride tablets, USP is alosetron hydrochloride (HCl), USP a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer, and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron hydrochloride tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron HCl, USP equivalent to 0.5 mg alosetron, and the 1 mg tablet contains 1.124 mg alosetron HCl, USP equivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose (anhydrous), magnesium stearate, microcrystalline cellulose, and pregelatinized starch. The white film coat for the 0.5 mg tablet contains hypromellose, titanium dioxide, and triacetin. The blue film coat for the 1 mg tablet contains hypromellose, titanium dioxide, triacetin, and indigo carmine."
},
{
"NDCCode": "64980-453-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (64980-453-50) ",
"NDC11Code": "64980-0453-50",
"ProductNDC": "64980-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alosetron Hydrochloride",
"NonProprietaryName": "Alosetron Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209180",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "ALOSETRON HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190114",
"SamplePackage": "N",
"IndicationAndUsage": "Alosetron hydrochloride tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer),, 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and, 3 not responded adequately to conventional therapy.",
"Description": "The active ingredient in alosetron hydrochloride tablets, USP is alosetron hydrochloride (HCl), USP a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer, and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron hydrochloride tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron HCl, USP equivalent to 0.5 mg alosetron, and the 1 mg tablet contains 1.124 mg alosetron HCl, USP equivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose (anhydrous), magnesium stearate, microcrystalline cellulose, and pregelatinized starch. The white film coat for the 0.5 mg tablet contains hypromellose, titanium dioxide, and triacetin. The blue film coat for the 1 mg tablet contains hypromellose, titanium dioxide, triacetin, and indigo carmine."
},
{
"NDCCode": "70518-0453-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-1) ",
"NDC11Code": "70518-0453-01",
"ProductNDC": "70518-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076710",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180413",
"SamplePackage": "N",
"Description": "Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble tofreely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide."
},
{
"NDCCode": "70518-0453-2",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70518-0453-2) ",
"NDC11Code": "70518-0453-02",
"ProductNDC": "70518-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076710",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20191219",
"SamplePackage": "N",
"Description": "Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients:. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. , 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide."
},
{
"NDCCode": "70518-0453-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-3) ",
"NDC11Code": "70518-0453-03",
"ProductNDC": "70518-0453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076710",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"Description": "Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble tofreely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide."
},
{
"NDCCode": "72603-453-01",
"PackageDescription": "1 VIAL in 1 BOX (72603-453-01) / 8 mL in 1 VIAL",
"NDC11Code": "72603-0453-01",
"ProductNDC": "72603-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090002",
"LabelerName": "NorthStar Rx, LLC",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/8mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2024-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods).Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to a methicillin-resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is a semisynthetic antibiotic penicillin derived from the penicillin nucleus 6-aminopenicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 6-[[(2- ethoxy-1-naphthalenyl)carbonyl]amino]-3,3-dimethyl-7-oxo- monosodium salt, monohydrate [2S (2α,5α,6β)]. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows:C21H21N2NaO5S·H2O M.W. 454.47. Nafcillin for Injection, USP, for intramuscular or the intravenous route of administration, containing nafcillin sodium as a white crystalline powder for reconstitution. It is soluble in water. The pH of the aqueous solution is 6.0 to 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial. The sodium content is 65.8 mg [2.9 mEq] per gram of nafcillin. The product is buffered with 40 mg sodium citrate per gram."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>15631-0453-0</NDCCode>
<PackageDescription>100 PELLET in 1 VIAL, SINGLE-DOSE (15631-0453-0) </PackageDescription>
<NDC11Code>15631-0453-00</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54868-0453-0</NDCCode>
<PackageDescription>25 TABLET, FILM COATED in 1 BOTTLE (54868-0453-0)</PackageDescription>
<NDC11Code>54868-0453-00</NDC11Code>
<ProductNDC>54868-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Premarin</ProprietaryName>
<NonProprietaryName>Conjugated Estrogens</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA004782</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTROGENS, CONJUGATED</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen [EPC],Estrogen Receptor Agonists [MoA],Estrogens, Conjugated (USP) [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-05-14</LastUpdate>
</NDC>
<NDC>
<NDCCode>55545-0453-0</NDCCode>
<PackageDescription>25 kg in 1 DRUM (55545-0453-0)</PackageDescription>
<NDC11Code>55545-0453-00</NDC11Code>
<ProductNDC>55545-0453</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Flurbiprofen Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19870101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>FDC Limited</LabelerName>
<SubstanceName>FLURBIPROFEN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70518-0453-0</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-0) </PackageDescription>
<NDC11Code>70518-0453-00</NDC11Code>
<ProductNDC>70518-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076710</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients:. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. , 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-0453-0</NDCCode>
<PackageDescription>16 CAPSULE in 1 BOTTLE (71335-0453-0) </PackageDescription>
<NDC11Code>71335-0453-00</NDC11Code>
<ProductNDC>71335-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065243</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin HCl and other antibacterial drugs, clindamycin HCl capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: 75 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Yellow No. 10, FD&C Green No. 3, and gelatin; 150 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Yellow No. 10, FD&C Green No. 3, D&C Red No. 33, FD&C Blue No. 1, titanium dioxide, and gelatin; 300 mg - lactose monohydrate, corn starch, magnesium stearate, talc, D&C Red No. 33, FD&C Blue No. 1, FD&C Green No. 3, titanium dioxide, and gelatin. The capsule imprinting ink contains: shellac glaze in ethanol, titanium dioxide, isopropyl alcohol, ammonium hydroxide, n-butyl alcohol, propylene glycol, and simethicone. The structural formula is represented below. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>15631-0453-1</NDCCode>
<PackageDescription>200 PELLET in 1 PACKAGE (15631-0453-1) </PackageDescription>
<NDC11Code>15631-0453-01</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0453-2</NDCCode>
<PackageDescription>400 PELLET in 1 PACKAGE (15631-0453-2) </PackageDescription>
<NDC11Code>15631-0453-02</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0453-3</NDCCode>
<PackageDescription>750 PELLET in 1 PACKAGE (15631-0453-3) </PackageDescription>
<NDC11Code>15631-0453-03</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0453-4</NDCCode>
<PackageDescription>2500 PELLET in 1 PACKAGE (15631-0453-4) </PackageDescription>
<NDC11Code>15631-0453-04</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0453-5</NDCCode>
<PackageDescription>12500 PELLET in 1 PACKAGE (15631-0453-5) </PackageDescription>
<NDC11Code>15631-0453-05</NDC11Code>
<ProductNDC>15631-0453</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Valeriana Officinalis</ProprietaryName>
<NonProprietaryName>Valeriana Officinalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>VALERIAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13668-453-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (13668-453-01) </PackageDescription>
<NDC11Code>13668-0453-01</NDC11Code>
<ProductNDC>13668-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Anagrelide</ProprietaryName>
<NonProprietaryName>Anagrelide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209151</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>ANAGRELIDE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Production [PE], Phosphodiesterase 3 Inhibitors [MoA], Platelet-reducing Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Anagrelide is a platelet reducing agent indicated for the treatment of thrombocythemia, secondary to myeloproliferative neoplasms, to reduce the elevated platelet count and the risk of thrombosis and to ameliorate associated symptoms including thrombo-hemorrhagic events. (1).</IndicationAndUsage>
<Description>Anagrelide hydrochloride, USP is a platelet-reducing agent. Its chemical name is 6,7-dichloro-1,5 dihydroimidazo[2,1-b] quinazolin-2(3H)-one monohydrochloride monohydrate and it has the following structural formula. C 10H 7Cl 2N 3O·HCl·H 2O M.W. 310.56. Anagrelide hydrochloride, USP is a white to off white powder that is practically insoluble in water and slightly soluble in dimethyl sulfoxide and very slightly soluble in dimethylformamide. Each Anagrelide Capsule USP, for oral administration, contains either 0.5 mg or 1 mg of anagrelide as anagrelide hydrochloride, USP and has the following inactive ingredients: black iron oxide, gelatin, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, hydroxypropyl cellulose, propylene glycol, shellac and titanium dioxide, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>13668-453-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (13668-453-30) </PackageDescription>
<NDC11Code>13668-0453-30</NDC11Code>
<ProductNDC>13668-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Anagrelide</ProprietaryName>
<NonProprietaryName>Anagrelide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209151</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>ANAGRELIDE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Production [PE], Phosphodiesterase 3 Inhibitors [MoA], Platelet-reducing Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Anagrelide is a platelet reducing agent indicated for the treatment of thrombocythemia, secondary to myeloproliferative neoplasms, to reduce the elevated platelet count and the risk of thrombosis and to ameliorate associated symptoms including thrombo-hemorrhagic events. (1).</IndicationAndUsage>
<Description>Anagrelide hydrochloride, USP is a platelet-reducing agent. Its chemical name is 6,7-dichloro-1,5 dihydroimidazo[2,1-b] quinazolin-2(3H)-one monohydrochloride monohydrate and it has the following structural formula. C 10H 7Cl 2N 3O·HCl·H 2O M.W. 310.56. Anagrelide hydrochloride, USP is a white to off white powder that is practically insoluble in water and slightly soluble in dimethyl sulfoxide and very slightly soluble in dimethylformamide. Each Anagrelide Capsule USP, for oral administration, contains either 0.5 mg or 1 mg of anagrelide as anagrelide hydrochloride, USP and has the following inactive ingredients: black iron oxide, gelatin, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, hydroxypropyl cellulose, propylene glycol, shellac and titanium dioxide, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42291-453-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (42291-453-60) </PackageDescription>
<NDC11Code>42291-0453-60</NDC11Code>
<ProductNDC>42291-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cilostazol</ProprietaryName>
<NonProprietaryName>Cilostazol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077030</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>CILOSTAZOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cilostazol tablets are indicated for the reduction of symptoms of intermittent claudication, as demonstrated by an increased walking distance.</IndicationAndUsage>
<Description>Cilostazol is a quinolinone derivative that inhibits cellular phosphodiesterase (more specific for phosphodiesterase III). The empirical formula of cilostazol is C 20H 27N 5O 2, and its molecular weight is 369.47. Cilostazol is 6-[4-(1-cyclohexyl-1 H-tetrazol-5-yl) butoxy]-3,4-dihydro-2(1 H)-quinolinone, CAS-73963-72-1. The structural formula is. Cilostazol occurs as white to off-white crystals or as a crystalline powder that is slightly soluble in methanol and ethanol, and is practically insoluble in water, 0.1 N HCl, and 0.1 N NaOH. Cilostazol tablets, USP for oral administration are available in 50 mg and 100 mg round, white tablets. Each tablet, in addition to the active ingredient, contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, and silicon dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>45802-453-84</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-453-84) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0453-84</NDC11Code>
<ProductNDC>45802-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101026</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020748</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene Cream, 0.1% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Adapalene Cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.53. Adapalene is represented by the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>49288-0453-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0453-1)</PackageDescription>
<NDC11Code>49288-0453-01</NDC11Code>
<ProductNDC>49288-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Rye Grass</ProprietaryName>
<NonProprietaryName>Cultivated Rye Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>SECALE CEREALE POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0453-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0453-2)</PackageDescription>
<NDC11Code>49288-0453-02</NDC11Code>
<ProductNDC>49288-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Rye Grass</ProprietaryName>
<NonProprietaryName>Cultivated Rye Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>SECALE CEREALE POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0453-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0453-3)</PackageDescription>
<NDC11Code>49288-0453-03</NDC11Code>
<ProductNDC>49288-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Rye Grass</ProprietaryName>
<NonProprietaryName>Cultivated Rye Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>SECALE CEREALE POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0453-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0453-4)</PackageDescription>
<NDC11Code>49288-0453-04</NDC11Code>
<ProductNDC>49288-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Rye Grass</ProprietaryName>
<NonProprietaryName>Cultivated Rye Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>SECALE CEREALE POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0453-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0453-5)</PackageDescription>
<NDC11Code>49288-0453-05</NDC11Code>
<ProductNDC>49288-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Rye Grass</ProprietaryName>
<NonProprietaryName>Cultivated Rye Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>SECALE CEREALE POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>50419-453-04</NDCCode>
<PackageDescription>4 PATCH in 1 CARTON (50419-453-04) / 7 d in 1 PATCH (50419-453-01) </PackageDescription>
<NDC11Code>50419-0453-04</NDC11Code>
<ProductNDC>50419-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Climara</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19980323</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020375</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Climara is indicated for.</IndicationAndUsage>
<Description>Climara (estradiol transdermal system), is designed to release estradiol continuously upon application to intact skin. Six (6.5, 9.375, 12.5, 15, 18.75 and 25 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 6.5, 9.375, 12.5, 15, 18.75 or 25 cm2, and contains 2, 2.85, 3.8, 4.55, 5.7 or 7.6 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17β-diol. It has an empirical formula of C18 H24 O2 and molecular weight of 272.38. The structural formula is. The Climara transdermal system comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1 A translucent polyethylene film., 2 An acrylate adhesive matrix containing estradiol USP., 3 A protective liner of siliconized or fluoropolymer-coated polyester film is attached to the adhesive surface and must be removed before the system can be used.</Description>
</NDC>
<NDC>
<NDCCode>51079-453-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-453-20) / 1 TABLET in 1 BLISTER PACK (51079-453-01) </PackageDescription>
<NDC11Code>51079-0453-20</NDC11Code>
<ProductNDC>51079-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midodrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Midodrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076577</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>MIDODRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midodrine hydrochloride tablets are indicated for the treatment of symptomatic orthostatic hypotension (OH). Because midodrine hydrochloride tablets can cause marked elevation of supine blood pressure (BP > 200 mmHg systolic), it should be used in patients whose lives are considerably impaired despite standard clinical care, including non-pharmacologic treatment (such as support stockings), fluid expansion, and lifestyle alterations. The indication is based on midodrine hydrochloride tablets' effect on increases in 1-minute standing systolic blood pressure, a surrogate marker considered likely to correspond to a clinical benefit. At present, however, clinical benefits of midodrine hydrochloride tablets, principally improved ability to perform life activities, have not been established. Further clinical trials are underway to verify and describe the clinical benefits of midodrine hydrochloride tablets. After initiation of treatment, midodrine hydrochloride tablets should be continued only for patients who report significant symptomatic improvement.</IndicationAndUsage>
<Description>Midodrine hydrochloride is a vasopressor/antihypotensive. The chemical name for midodrine hydrochloride is Acetamide, 2-amino- N-[2-(2,5-dimethoxyphenyl)-2-hydroxyethyl]-, monohydrochloride, (±)-. The molecular weight of midodrine hydrochloride is 290.7. Its structural formula and molecular formula are:. Midodrine hydrochloride, USP is an odorless, white, crystalline powder. It is soluble in water and sparingly soluble in methanol and has a pKa of 7.8 (0.3% aqueous solution) and a pH of 3.5 to 5.5 (5% aqueous solution). It has a melting range of 200° to 203°C. Each midodrine hydrochloride tablet, USP for oral administration contains 2.5 mg, 5 mg or 10 mg of midodrine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>51407-453-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (51407-453-90) </PackageDescription>
<NDC11Code>51407-0453-90</NDC11Code>
<ProductNDC>51407-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine</ProprietaryName>
<NonProprietaryName>Venlafaxine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078627</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine tablets, USP is indicated for the treatment of major depressive disorder. The efficacy of venlafaxine tablets, USP in the treatment of major depressive disorder was established in 6 week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III or DSM-III-R category of major depression and in a 4 week controlled trial of inpatients meeting diagnostic criteria for major depression with melancholia (see CLINICAL TRIALS). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The efficacy of venlafaxine hydrochloride extended-release capsules in maintaining an antidepressant response for up to 26 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial. The efficacy of venlafaxine tablets, USP in maintaining an antidepressant response in patients with recurrent depression who had responded and continued to be improved during an initial 26 weeks of treatment and were then followed for a period of up to 52 weeks was demonstrated in a second placebo-controlled trial (see CLINICAL TRIALS). Nevertheless, the physician who elects to use venlafaxine tablets, USP/venlafaxine hydrochloride extended-release capsules for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Venlafaxine tablets, USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17H 27NO 2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride, USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg of venlafaxine base and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, sodium starch glycolate, iron oxide red, iron oxide yellow, colloidal silicon dioxide, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>58151-453-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (58151-453-01) </PackageDescription>
<NDC11Code>58151-0453-01</NDC11Code>
<ProductNDC>58151-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xanax</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250710</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018276</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XANAX is indicated for the: 1 acute treatment of generalized anxiety disorder (GAD) in adults. , 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>XANAX contains alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each XANAX tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam. Inactive ingredients: cellulose, corn starch, docusate sodium, lactose, magnesium stearate, silicon dioxide and sodium benzoate. In addition, the 0.5 mg tablet contains FD&C Yellow No. 6 and the 1 mg tablet contains FD&C Blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>58151-453-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (58151-453-05) </PackageDescription>
<NDC11Code>58151-0453-05</NDC11Code>
<ProductNDC>58151-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xanax</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250710</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018276</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XANAX is indicated for the: 1 acute treatment of generalized anxiety disorder (GAD) in adults. , 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>XANAX contains alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each XANAX tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam. Inactive ingredients: cellulose, corn starch, docusate sodium, lactose, magnesium stearate, silicon dioxide and sodium benzoate. In addition, the 0.5 mg tablet contains FD&C Yellow No. 6 and the 1 mg tablet contains FD&C Blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>64980-453-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (64980-453-03) </PackageDescription>
<NDC11Code>64980-0453-03</NDC11Code>
<ProductNDC>64980-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Alosetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209180</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ALOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alosetron hydrochloride tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer),, 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and, 3 not responded adequately to conventional therapy.</IndicationAndUsage>
<Description>The active ingredient in alosetron hydrochloride tablets, USP is alosetron hydrochloride (HCl), USP a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer, and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron hydrochloride tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron HCl, USP equivalent to 0.5 mg alosetron, and the 1 mg tablet contains 1.124 mg alosetron HCl, USP equivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose (anhydrous), magnesium stearate, microcrystalline cellulose, and pregelatinized starch. The white film coat for the 0.5 mg tablet contains hypromellose, titanium dioxide, and triacetin. The blue film coat for the 1 mg tablet contains hypromellose, titanium dioxide, triacetin, and indigo carmine.</Description>
</NDC>
<NDC>
<NDCCode>64980-453-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (64980-453-50) </PackageDescription>
<NDC11Code>64980-0453-50</NDC11Code>
<ProductNDC>64980-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Alosetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209180</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ALOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alosetron hydrochloride tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer),, 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and, 3 not responded adequately to conventional therapy.</IndicationAndUsage>
<Description>The active ingredient in alosetron hydrochloride tablets, USP is alosetron hydrochloride (HCl), USP a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer, and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron hydrochloride tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron HCl, USP equivalent to 0.5 mg alosetron, and the 1 mg tablet contains 1.124 mg alosetron HCl, USP equivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose (anhydrous), magnesium stearate, microcrystalline cellulose, and pregelatinized starch. The white film coat for the 0.5 mg tablet contains hypromellose, titanium dioxide, and triacetin. The blue film coat for the 1 mg tablet contains hypromellose, titanium dioxide, triacetin, and indigo carmine.</Description>
</NDC>
<NDC>
<NDCCode>70518-0453-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-1) </PackageDescription>
<NDC11Code>70518-0453-01</NDC11Code>
<ProductNDC>70518-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076710</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble tofreely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70518-0453-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-0453-2) </PackageDescription>
<NDC11Code>70518-0453-02</NDC11Code>
<ProductNDC>70518-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076710</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients:. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. , 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70518-0453-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0453-3) </PackageDescription>
<NDC11Code>70518-0453-03</NDC11Code>
<ProductNDC>70518-0453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076710</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levofloxacin tablets are synthetic antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble tofreely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin tablets USP are available as film-coated tablets and contain the following inactive ingredients. : 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, FD&C yellow no. 5 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, synthetic yellow iron oxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>72603-453-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (72603-453-01) / 8 mL in 1 VIAL</PackageDescription>
<NDC11Code>72603-0453-01</NDC11Code>
<ProductNDC>72603-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090002</ApplicationNumber>
<LabelerName>NorthStar Rx, LLC</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/8mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods).Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to a methicillin-resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is a semisynthetic antibiotic penicillin derived from the penicillin nucleus 6-aminopenicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 6-[[(2- ethoxy-1-naphthalenyl)carbonyl]amino]-3,3-dimethyl-7-oxo- monosodium salt, monohydrate [2S (2α,5α,6β)]. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows:C21H21N2NaO5S·H2O M.W. 454.47. Nafcillin for Injection, USP, for intramuscular or the intravenous route of administration, containing nafcillin sodium as a white crystalline powder for reconstitution. It is soluble in water. The pH of the aqueous solution is 6.0 to 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial. The sodium content is 65.8 mg [2.9 mEq] per gram of nafcillin. The product is buffered with 40 mg sodium citrate per gram.</Description>
</NDC>
</NDCList>