{
"NDC": [
{
"NDCCode": "16110-587-80",
"PackageDescription": "1 BOTTLE in 1 CARTON (16110-587-80) / 1500 cm2 in 1 BOTTLE",
"NDC11Code": "16110-0587-80",
"ProductNDC": "16110-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "TAPE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180924",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016455",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/cm2",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses, particularly dry, scaling localized lesions.",
"Description": "Cordran Tape (Flurandrenolide Tape, USP) is a transparent, inconspicuous, plastic surgical tape. It contains Cordran (Flurandrenolide, USP), a potent corticosteroid for topical use. Flurandrenolide occurs as white to off-white, fluffy crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21 dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11ß, 16α)-; its empirical formula is C24H33FO6. The structural formula is as follows. Each square centimeter contains 4 mcg (0.00916 μmol) flurandrenolide uniformly distributed in the adhesive layer. The tape is made of a thin, matte-finish polyethylene film that is slightly elastic and highly flexible. The adhesive is a synthetic copolymer of acrylate ester and acrylic acid that is free from substances of plant origin. The pressure-sensitive adhesive surface is covered with a protective paper liner to permit handling and trimming before application."
},
{
"NDCCode": "16110-587-24",
"PackageDescription": "1 BOTTLE in 1 CARTON (16110-587-24) / 450 cm2 in 1 BOTTLE",
"NDC11Code": "16110-0587-24",
"ProductNDC": "16110-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "TAPE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180924",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016455",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/cm2",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses, particularly dry, scaling localized lesions.",
"Description": "Cordran Tape (Flurandrenolide Tape, USP) is a transparent, inconspicuous, plastic surgical tape. It contains Cordran (Flurandrenolide, USP), a potent corticosteroid for topical use. Flurandrenolide occurs as white to off-white, fluffy crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21 dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11ß, 16α)-; its empirical formula is C24H33FO6. The structural formula is as follows. Each square centimeter contains 4 mcg (0.00916 μmol) flurandrenolide uniformly distributed in the adhesive layer. The tape is made of a thin, matte-finish polyethylene film that is slightly elastic and highly flexible. The adhesive is a synthetic copolymer of acrylate ester and acrylic acid that is free from substances of plant origin. The pressure-sensitive adhesive surface is covered with a protective paper liner to permit handling and trimming before application."
},
{
"NDCCode": "71610-587-80",
"PackageDescription": "180 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-587-80) ",
"NDC11Code": "71610-0587-80",
"ProductNDC": "71610-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207427",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2022-02-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210728",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-release Tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-release Tablets USP are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin Hydrochloride (N,N-dimethylimidodicarbonimidic diamide Hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin Hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin Hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin Hydrochloride is 6.68. Metformin Hydrochloride Extended-release Tablets USP contain 500 mg or 750 mg of Metformin Hydrochloride USP as the active ingredient. Metformin Hydrochloride Extended-release Tablets USP 500 mg and 750 mg contain the inactive ingredients microcrystalline cellulose, hypromellose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets USP comprises a duel hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. The USP Dissolution Test is pending."
},
{
"NDCCode": "16110-526-30",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (16110-526-30) / 30 g in 1 BOTTLE, PUMP",
"NDC11Code": "16110-0526-30",
"ProductNDC": "16110-526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aczone",
"NonProprietaryName": "Dapsone",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA207154",
"LabelerName": "Almirall, LLC",
"SubstanceName": "DAPSONE",
"StrengthNumber": "75",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Sulfone [EPC], Sulfones [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water."
},
{
"NDCCode": "16110-526-60",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (16110-526-60) / 60 g in 1 BOTTLE, PUMP",
"NDC11Code": "16110-0526-60",
"ProductNDC": "16110-526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aczone",
"NonProprietaryName": "Dapsone",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA207154",
"LabelerName": "Almirall, LLC",
"SubstanceName": "DAPSONE",
"StrengthNumber": "75",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Sulfone [EPC], Sulfones [CS]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water."
},
{
"NDCCode": "16110-526-90",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (16110-526-90) / 90 g in 1 BOTTLE, PUMP",
"NDC11Code": "16110-0526-90",
"ProductNDC": "16110-526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aczone",
"NonProprietaryName": "Dapsone",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190910",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA207154",
"LabelerName": "Almirall, LLC",
"SubstanceName": "DAPSONE",
"StrengthNumber": "75",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Sulfone [EPC], Sulfones [CS]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190910",
"SamplePackage": "N",
"IndicationAndUsage": "ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water."
},
{
"NDCCode": "36800-587-40",
"PackageDescription": "355 mL in 1 BOTTLE (36800-587-40) ",
"NDC11Code": "36800-0587-40",
"ProductNDC": "36800-587",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Maximum Strength Antacid Cherry Liquid",
"NonProprietaryName": "Aluminum Hydroxide, Magnesium Hydroxide, Simethicone",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20201001",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "Topco Associates, LLC",
"SubstanceName": "ALUMINUM HYDROXIDE; MAGNESIUM HYDROXIDE; DIMETHICONE",
"StrengthNumber": "800; 800; 80",
"StrengthUnit": "mg/10mL; mg/10mL; mg/10mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Skin Barrier Activity [PE], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201001",
"SamplePackage": "N",
"IndicationAndUsage": "relieves."
},
{
"NDCCode": "47335-587-08",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (47335-587-08) ",
"NDC11Code": "47335-0587-08",
"ProductNDC": "47335-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091103",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140415",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg)."
},
{
"NDCCode": "47335-587-18",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (47335-587-18) ",
"NDC11Code": "47335-0587-18",
"ProductNDC": "47335-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091103",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140415",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg)."
},
{
"NDCCode": "47335-587-83",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (47335-587-83) ",
"NDC11Code": "47335-0587-83",
"ProductNDC": "47335-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091103",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140415",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg)."
},
{
"NDCCode": "47335-587-88",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (47335-587-88) ",
"NDC11Code": "47335-0587-88",
"ProductNDC": "47335-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091103",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140415",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg)."
},
{
"NDCCode": "60687-587-01",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-587-01) / 1 TABLET in 1 BLISTER PACK (60687-587-11) ",
"NDC11Code": "60687-0587-01",
"ProductNDC": "60687-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210621",
"EndMarketingDate": "20271031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070322",
"LabelerName": "American Health Packaging",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210621",
"EndMarketingDatePackage": "20271031",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets, USP are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets, USP are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride, USP is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its structural formula is. C 16H 21NO 2HCl M.W. 295.80. Propranolol hydrochloride, USP is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Propranolol hydrochloride tablets, USP are available as tablets for oral administration containing either 10 mg, 20 mg, 40 mg, 60 mg, or 80 mg of propranolol hydrochloride, USP. Propranolol hydrochloride tablets, USP also contain colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose. Color additives include FD&C Yellow no. 6 aluminum lake (10 mg and 80 mg), D&C Yellow no. 10 aluminum lake (40 mg and 80 mg), FD&C Blue no. 1 aluminum lake (20 mg and 40 mg) and FD&C Red no. 40 aluminum lake (60 mg)."
},
{
"NDCCode": "72189-587-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (72189-587-30) ",
"NDC11Code": "72189-0587-30",
"ProductNDC": "72189-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214344",
"LabelerName": "Direct_Rx",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241004",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. [atorvastatinfigure1.]. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending."
},
{
"NDCCode": "72189-587-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72189-587-90) ",
"NDC11Code": "72189-0587-90",
"ProductNDC": "72189-587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214344",
"LabelerName": "Direct_Rx",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241004",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. [atorvastatinfigure1.]. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending."
},
{
"NDCCode": "16110-026-60",
"PackageDescription": "1 TUBE in 1 CARTON (16110-026-60) > 60 g in 1 TUBE",
"NDC11Code": "16110-0026-60",
"ProductNDC": "16110-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "19651018",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA012806",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "19651018",
"SamplePackage": "N"
},
{
"NDCCode": "16110-034-12",
"PackageDescription": "1 TUBE in 1 CARTON (16110-034-12) > 120 g in 1 TUBE",
"NDC11Code": "16110-0034-12",
"ProductNDC": "16110-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181012",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA012806",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181012",
"SamplePackage": "N"
},
{
"NDCCode": "16110-035-12",
"PackageDescription": "1 TUBE in 1 CARTON (16110-035-12) / 120 g in 1 TUBE",
"NDC11Code": "16110-0035-12",
"ProductNDC": "16110-035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19651018",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA012806",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19651018",
"SamplePackage": "N",
"IndicationAndUsage": "Cordran® (flurandrenolide, USP) is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram of flurandrenolide dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each gram of Cordran® Cream (flurandrenolide Cream, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in an emulsified base composed of cetyl alcohol, citric acid, mineral oil, polyoxyl 40 stearate, propylene glycol, sodium citrate, stearic acid, and purified water. Each gram of Cordran® Ointment (flurandrenolide Ointment, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in a base composed of white wax, cetyl alcohol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "16110-035-60",
"PackageDescription": "1 TUBE in 1 CARTON (16110-035-60) / 60 g in 1 TUBE",
"NDC11Code": "16110-0035-60",
"ProductNDC": "16110-035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19651018",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA012806",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19651018",
"SamplePackage": "N",
"IndicationAndUsage": "Cordran® (flurandrenolide, USP) is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram of flurandrenolide dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each gram of Cordran® Cream (flurandrenolide Cream, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in an emulsified base composed of cetyl alcohol, citric acid, mineral oil, polyoxyl 40 stearate, propylene glycol, sodium citrate, stearic acid, and purified water. Each gram of Cordran® Ointment (flurandrenolide Ointment, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in a base composed of white wax, cetyl alcohol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "16110-042-10",
"PackageDescription": "1 TUBE in 1 CARTON (16110-042-10) / 100 g in 1 TUBE",
"NDC11Code": "16110-0042-10",
"ProductNDC": "16110-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tazorac",
"NonProprietaryName": "Tazarotene",
"DosageFormName": "GEL",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20200221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020600",
"LabelerName": "Almirall, LLC",
"SubstanceName": "TAZAROTENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200221",
"SamplePackage": "N",
"IndicationAndUsage": "TAZORAC® Gel, 0.05% and 0.1% is a retinoid indicated for the topical treatment of plaque psoriasis of up to 20% body surface area involvement. (1.1). TAZORAC Gel, 0.1% is indicated for the topical treatment of mild to moderate facial acne vulgaris. (1.2).",
"Description": "TAZORAC (tazarotene) Gel, 0.05% and 0.1% is for topical use and contains the active ingredient, tazarotene. Each gram of TAZORAC Gel, 0.05% and 0.1% contains 0.5 and 1 mg of tazarotene, respectively in a translucent, aqueous gel. Tazarotene is a member of the acetylenic class of retinoids. Chemically, tazarotene is ethyl 6-[(4,4-dimethylthiochroman-6-yl)ethynyl]nicotinate. The compound has an empirical formula of C21H21NO2S and molecular weight of 351.46. The structural formula is shown below. TAZORAC Gel contains the following inactive ingredients. benzyl alcohol 1%;ascorbic acid; butylated hydroxyanisole; butylated hydroxytoluene; carbomer homopolymer type B; edetate disodium; hexylene glycol; poloxamer 407; polyethylene glycol 400; polysorbate 40; purified water; and tromethamine."
},
{
"NDCCode": "16110-042-30",
"PackageDescription": "1 TUBE in 1 CARTON (16110-042-30) / 30 g in 1 TUBE",
"NDC11Code": "16110-0042-30",
"ProductNDC": "16110-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tazorac",
"NonProprietaryName": "Tazarotene",
"DosageFormName": "GEL",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20200221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020600",
"LabelerName": "Almirall, LLC",
"SubstanceName": "TAZAROTENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200221",
"SamplePackage": "N",
"IndicationAndUsage": "TAZORAC® Gel, 0.05% and 0.1% is a retinoid indicated for the topical treatment of plaque psoriasis of up to 20% body surface area involvement. (1.1). TAZORAC Gel, 0.1% is indicated for the topical treatment of mild to moderate facial acne vulgaris. (1.2).",
"Description": "TAZORAC (tazarotene) Gel, 0.05% and 0.1% is for topical use and contains the active ingredient, tazarotene. Each gram of TAZORAC Gel, 0.05% and 0.1% contains 0.5 and 1 mg of tazarotene, respectively in a translucent, aqueous gel. Tazarotene is a member of the acetylenic class of retinoids. Chemically, tazarotene is ethyl 6-[(4,4-dimethylthiochroman-6-yl)ethynyl]nicotinate. The compound has an empirical formula of C21H21NO2S and molecular weight of 351.46. The structural formula is shown below. TAZORAC Gel contains the following inactive ingredients. benzyl alcohol 1%;ascorbic acid; butylated hydroxyanisole; butylated hydroxytoluene; carbomer homopolymer type B; edetate disodium; hexylene glycol; poloxamer 407; polyethylene glycol 400; polysorbate 40; purified water; and tromethamine."
},
{
"NDCCode": "16110-052-12",
"PackageDescription": "120 mL in 1 BOTTLE, PLASTIC (16110-052-12) ",
"NDC11Code": "16110-0052-12",
"ProductNDC": "16110-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19630319",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013790",
"LabelerName": "Almirall, LLC",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19630319",
"SamplePackage": "N",
"IndicationAndUsage": "Cordran Lotion is indicated for the relief of the inflammatory and pruritic manifestations of cortico-steroid-responsive dermatoses.",
"Description": "Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One g dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16, 17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each mL of Cordran Lotion contains 0.5 mg (1.145 µmol) (0.05%) flurandrenolide in an oil-in-water emulsion base composed of glycerin, cetyl alcohol, stearic acid, glyceryl monostearate, mineral oil, polyoxyl 40 stearate, menthol, benzyl alcohol, and purified water."
},
{
"NDCCode": "16110-052-15",
"PackageDescription": "15 mL in 1 BOTTLE, PLASTIC (16110-052-15)",
"NDC11Code": "16110-0052-15",
"ProductNDC": "16110-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19630319",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013790",
"LabelerName": "Aqua Pharmaceuticals",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-11",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "16110-052-60",
"PackageDescription": "60 mL in 1 BOTTLE, PLASTIC (16110-052-60)",
"NDC11Code": "16110-0052-60",
"ProductNDC": "16110-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cordran",
"NonProprietaryName": "Flurandrenolide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19630319",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013790",
"LabelerName": "Aqua Pharmaceuticals",
"SubstanceName": "FLURANDRENOLIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-11",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "16110-071-30",
"PackageDescription": "1 TUBE in 1 CARTON (16110-071-30) > 30 g in 1 TUBE",
"NDC11Code": "16110-0071-30",
"ProductNDC": "16110-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Veltin",
"NonProprietaryName": "Clindamycin Phosphate And Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100729",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050803",
"LabelerName": "Almirall, LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; TRETINOIN",
"StrengthNumber": "10; .25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100729",
"SamplePackage": "N",
"IndicationAndUsage": "VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.",
"Description": "VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. VELTIN Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine."
},
{
"NDCCode": "16110-071-60",
"PackageDescription": "1 TUBE in 1 CARTON (16110-071-60) > 60 g in 1 TUBE",
"NDC11Code": "16110-0071-60",
"ProductNDC": "16110-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Veltin",
"NonProprietaryName": "Clindamycin Phosphate And Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100729",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050803",
"LabelerName": "Almirall, LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; TRETINOIN",
"StrengthNumber": "10; .25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100729",
"SamplePackage": "N",
"IndicationAndUsage": "VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.",
"Description": "VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. VELTIN Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine."
},
{
"NDCCode": "16110-075-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (16110-075-01)",
"NDC11Code": "16110-0075-01",
"ProductNDC": "16110-075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monodox",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20070131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050641",
"LabelerName": "Aqua Pharmaceuticals, LLC",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "INDICATIONS AND USAGE. To reduce the development of drug-resistant bacteria and maintain effectiveness of MONODOX and other antibacterial drugs, MONODOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. MONODOX 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, red iron oxide, and yellow iron oxide for the 50 mg and 100 mg strengths and black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10 for the 75 mg strength."
},
{
"NDCCode": "16110-080-02",
"PackageDescription": "2 g in 1 TUBE (16110-080-02)",
"NDC11Code": "16110-0080-02",
"ProductNDC": "16110-080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xolegel",
"NonProprietaryName": "Ketoconazole",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060728",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021946",
"LabelerName": "Aqua Pharmaceuticals, LLC.",
"SubstanceName": "KETOCONAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Azole Antifungal [EPC],Azoles [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A5 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2015-03-27"
},
{
"NDCCode": "16110-080-45",
"PackageDescription": "1 TUBE in 1 CARTON (16110-080-45) > 45 g in 1 TUBE",
"NDC11Code": "16110-0080-45",
"ProductNDC": "16110-080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xolegel",
"NonProprietaryName": "Ketoconazole",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060728",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021946",
"LabelerName": "Almirall, LLC",
"SubstanceName": "KETOCONAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20060728",
"SamplePackage": "N"
},
{
"NDCCode": "16110-111-00",
"PackageDescription": "1 CAN in 1 CARTON (16110-111-00) > 100 g in 1 CAN",
"NDC11Code": "16110-0111-00",
"ProductNDC": "16110-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verdeso",
"NonProprietaryName": "Desonide",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20061006",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021978",
"LabelerName": "Almirall, LLC",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20161001",
"SamplePackage": "N",
"IndicationAndUsage": "VERDESO® (desonide) Foam, 0.05% is indicated for the treatment of mild to moderate atopic dermatitis in patients 3 months of age and older. Patients should be instructed to use VERDESO Foam for the minimum amount of time necessary to achieve the desired results because of the potential for VERDESO Foam to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Treatment should not exceed 4 consecutive weeks.",
"Description": "VERDESO Foam is a white to off-white petrolatum-based emulsion aerosol foam containing the active ingredient desonide, a low-potency topical corticosteroid. Chemically, desonide is (11,16)-11,21-dihydroxy-16,17-[(1-methylethylidene)-bis(oxy)]-pregna-1,4-diene-3,20-dione. The structural formula of desonide is represented below. Desonide has a molecular formula of C24H32O6 and a molecular weight of 416.51. Desonide is a white powder or crystal that is practically insoluble in water, sparingly soluble in ethanol and in acetone, and soluble in chloroform. Each gram of VERDESO Foam contains 0.5 mg desonide. The foam also contains anhydrous citric acid, cetyl alcohol, cyclomethicone, isopropyl myristate, light mineral oil, white petrolatum, polyoxyl 20 cetostearyl ether, potassium citrate (monohydrate), propylene glycol, purified water, sorbitan monolaurate, and phenoxyethanol as a preservative. VERDESO Foam is dispensed from an aluminum can pressurized with a hydrocarbon (propane/butane) propellant."
},
{
"NDCCode": "16110-245-00",
"PackageDescription": "48000 TABLET, COATED in 1 BAG (16110-245-00) ",
"NDC11Code": "16110-0245-00",
"ProductNDC": "16110-245",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Sarecycline Hydrochloride",
"DosageFormName": "TABLET, COATED",
"StartMarketingDate": "20190104",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Almirall, LLC",
"SubstanceName": "SARECYCLINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2026-05-19",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "04-JAN-19"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>16110-587-80</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (16110-587-80) / 1500 cm2 in 1 BOTTLE</PackageDescription>
<NDC11Code>16110-0587-80</NDC11Code>
<ProductNDC>16110-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>TAPE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180924</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016455</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/cm2</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses, particularly dry, scaling localized lesions.</IndicationAndUsage>
<Description>Cordran Tape (Flurandrenolide Tape, USP) is a transparent, inconspicuous, plastic surgical tape. It contains Cordran (Flurandrenolide, USP), a potent corticosteroid for topical use. Flurandrenolide occurs as white to off-white, fluffy crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21 dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11ß, 16α)-; its empirical formula is C24H33FO6. The structural formula is as follows. Each square centimeter contains 4 mcg (0.00916 μmol) flurandrenolide uniformly distributed in the adhesive layer. The tape is made of a thin, matte-finish polyethylene film that is slightly elastic and highly flexible. The adhesive is a synthetic copolymer of acrylate ester and acrylic acid that is free from substances of plant origin. The pressure-sensitive adhesive surface is covered with a protective paper liner to permit handling and trimming before application.</Description>
</NDC>
<NDC>
<NDCCode>16110-587-24</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (16110-587-24) / 450 cm2 in 1 BOTTLE</PackageDescription>
<NDC11Code>16110-0587-24</NDC11Code>
<ProductNDC>16110-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>TAPE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180924</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016455</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/cm2</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses, particularly dry, scaling localized lesions.</IndicationAndUsage>
<Description>Cordran Tape (Flurandrenolide Tape, USP) is a transparent, inconspicuous, plastic surgical tape. It contains Cordran (Flurandrenolide, USP), a potent corticosteroid for topical use. Flurandrenolide occurs as white to off-white, fluffy crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21 dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11ß, 16α)-; its empirical formula is C24H33FO6. The structural formula is as follows. Each square centimeter contains 4 mcg (0.00916 μmol) flurandrenolide uniformly distributed in the adhesive layer. The tape is made of a thin, matte-finish polyethylene film that is slightly elastic and highly flexible. The adhesive is a synthetic copolymer of acrylate ester and acrylic acid that is free from substances of plant origin. The pressure-sensitive adhesive surface is covered with a protective paper liner to permit handling and trimming before application.</Description>
</NDC>
<NDC>
<NDCCode>71610-587-80</NDCCode>
<PackageDescription>180 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-587-80) </PackageDescription>
<NDC11Code>71610-0587-80</NDC11Code>
<ProductNDC>71610-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207427</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-release Tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-release Tablets USP are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin Hydrochloride (N,N-dimethylimidodicarbonimidic diamide Hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin Hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin Hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin Hydrochloride is 6.68. Metformin Hydrochloride Extended-release Tablets USP contain 500 mg or 750 mg of Metformin Hydrochloride USP as the active ingredient. Metformin Hydrochloride Extended-release Tablets USP 500 mg and 750 mg contain the inactive ingredients microcrystalline cellulose, hypromellose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets USP comprises a duel hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. The USP Dissolution Test is pending.</Description>
</NDC>
<NDC>
<NDCCode>16110-526-30</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (16110-526-30) / 30 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>16110-0526-30</NDC11Code>
<ProductNDC>16110-526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aczone</ProprietaryName>
<NonProprietaryName>Dapsone</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA207154</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>DAPSONE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Sulfone [EPC], Sulfones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>16110-526-60</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (16110-526-60) / 60 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>16110-0526-60</NDC11Code>
<ProductNDC>16110-526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aczone</ProprietaryName>
<NonProprietaryName>Dapsone</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA207154</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>DAPSONE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Sulfone [EPC], Sulfones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>16110-526-90</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (16110-526-90) / 90 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>16110-0526-90</NDC11Code>
<ProductNDC>16110-526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aczone</ProprietaryName>
<NonProprietaryName>Dapsone</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190910</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA207154</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>DAPSONE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Sulfone [EPC], Sulfones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ACZONE® (dapsone) Gel, 7.5%, is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>ACZONE (dapsone) Gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. ACZONE Gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C12H12N2O2S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone’s chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is. Each gram of ACZONE Gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>36800-587-40</NDCCode>
<PackageDescription>355 mL in 1 BOTTLE (36800-587-40) </PackageDescription>
<NDC11Code>36800-0587-40</NDC11Code>
<ProductNDC>36800-587</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Maximum Strength Antacid Cherry Liquid</ProprietaryName>
<NonProprietaryName>Aluminum Hydroxide, Magnesium Hydroxide, Simethicone</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>Topco Associates, LLC</LabelerName>
<SubstanceName>ALUMINUM HYDROXIDE; MAGNESIUM HYDROXIDE; DIMETHICONE</SubstanceName>
<StrengthNumber>800; 800; 80</StrengthNumber>
<StrengthUnit>mg/10mL; mg/10mL; mg/10mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Skin Barrier Activity [PE], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>47335-587-08</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (47335-587-08) </PackageDescription>
<NDC11Code>47335-0587-08</NDC11Code>
<ProductNDC>47335-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091103</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg).</Description>
</NDC>
<NDC>
<NDCCode>47335-587-18</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (47335-587-18) </PackageDescription>
<NDC11Code>47335-0587-18</NDC11Code>
<ProductNDC>47335-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091103</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg).</Description>
</NDC>
<NDC>
<NDCCode>47335-587-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (47335-587-83) </PackageDescription>
<NDC11Code>47335-0587-83</NDC11Code>
<ProductNDC>47335-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091103</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg).</Description>
</NDC>
<NDC>
<NDCCode>47335-587-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (47335-587-88) </PackageDescription>
<NDC11Code>47335-0587-88</NDC11Code>
<ProductNDC>47335-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091103</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance.The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C17H17ClN6O3. Eszopiclone has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2).Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg).</Description>
</NDC>
<NDC>
<NDCCode>60687-587-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-587-01) / 1 TABLET in 1 BLISTER PACK (60687-587-11) </PackageDescription>
<NDC11Code>60687-0587-01</NDC11Code>
<ProductNDC>60687-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210621</StartMarketingDate>
<EndMarketingDate>20271031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070322</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210621</StartMarketingDatePackage>
<EndMarketingDatePackage>20271031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets, USP are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets, USP are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride, USP is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its structural formula is. C 16H 21NO 2HCl M.W. 295.80. Propranolol hydrochloride, USP is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Propranolol hydrochloride tablets, USP are available as tablets for oral administration containing either 10 mg, 20 mg, 40 mg, 60 mg, or 80 mg of propranolol hydrochloride, USP. Propranolol hydrochloride tablets, USP also contain colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose. Color additives include FD&C Yellow no. 6 aluminum lake (10 mg and 80 mg), D&C Yellow no. 10 aluminum lake (40 mg and 80 mg), FD&C Blue no. 1 aluminum lake (20 mg and 40 mg) and FD&C Red no. 40 aluminum lake (60 mg).</Description>
</NDC>
<NDC>
<NDCCode>72189-587-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (72189-587-30) </PackageDescription>
<NDC11Code>72189-0587-30</NDC11Code>
<ProductNDC>72189-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214344</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. [atorvastatinfigure1.]. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>72189-587-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72189-587-90) </PackageDescription>
<NDC11Code>72189-0587-90</NDC11Code>
<ProductNDC>72189-587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214344</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. [atorvastatinfigure1.]. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>16110-026-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-026-60) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0026-60</NDC11Code>
<ProductNDC>16110-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19651018</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA012806</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19651018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16110-034-12</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-034-12) > 120 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0034-12</NDC11Code>
<ProductNDC>16110-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181012</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA012806</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16110-035-12</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-035-12) / 120 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0035-12</NDC11Code>
<ProductNDC>16110-035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19651018</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA012806</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19651018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cordran® (flurandrenolide, USP) is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram of flurandrenolide dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each gram of Cordran® Cream (flurandrenolide Cream, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in an emulsified base composed of cetyl alcohol, citric acid, mineral oil, polyoxyl 40 stearate, propylene glycol, sodium citrate, stearic acid, and purified water. Each gram of Cordran® Ointment (flurandrenolide Ointment, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in a base composed of white wax, cetyl alcohol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>16110-035-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-035-60) / 60 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0035-60</NDC11Code>
<ProductNDC>16110-035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19651018</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA012806</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19651018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cordran® (flurandrenolide, USP) is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One gram of flurandrenolide dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each gram of Cordran® Cream (flurandrenolide Cream, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in an emulsified base composed of cetyl alcohol, citric acid, mineral oil, polyoxyl 40 stearate, propylene glycol, sodium citrate, stearic acid, and purified water. Each gram of Cordran® Ointment (flurandrenolide Ointment, USP) contains 0.5 mg (1.145 µmol; 0.05%) or 0.25 mg (0.57 µmol; 0.025%) flurandrenolide in a base composed of white wax, cetyl alcohol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>16110-042-10</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-042-10) / 100 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0042-10</NDC11Code>
<ProductNDC>16110-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tazorac</ProprietaryName>
<NonProprietaryName>Tazarotene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20200221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020600</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>TAZAROTENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TAZORAC® Gel, 0.05% and 0.1% is a retinoid indicated for the topical treatment of plaque psoriasis of up to 20% body surface area involvement. (1.1). TAZORAC Gel, 0.1% is indicated for the topical treatment of mild to moderate facial acne vulgaris. (1.2).</IndicationAndUsage>
<Description>TAZORAC (tazarotene) Gel, 0.05% and 0.1% is for topical use and contains the active ingredient, tazarotene. Each gram of TAZORAC Gel, 0.05% and 0.1% contains 0.5 and 1 mg of tazarotene, respectively in a translucent, aqueous gel. Tazarotene is a member of the acetylenic class of retinoids. Chemically, tazarotene is ethyl 6-[(4,4-dimethylthiochroman-6-yl)ethynyl]nicotinate. The compound has an empirical formula of C21H21NO2S and molecular weight of 351.46. The structural formula is shown below. TAZORAC Gel contains the following inactive ingredients. benzyl alcohol 1%;ascorbic acid; butylated hydroxyanisole; butylated hydroxytoluene; carbomer homopolymer type B; edetate disodium; hexylene glycol; poloxamer 407; polyethylene glycol 400; polysorbate 40; purified water; and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>16110-042-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-042-30) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0042-30</NDC11Code>
<ProductNDC>16110-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tazorac</ProprietaryName>
<NonProprietaryName>Tazarotene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20200221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020600</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>TAZAROTENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TAZORAC® Gel, 0.05% and 0.1% is a retinoid indicated for the topical treatment of plaque psoriasis of up to 20% body surface area involvement. (1.1). TAZORAC Gel, 0.1% is indicated for the topical treatment of mild to moderate facial acne vulgaris. (1.2).</IndicationAndUsage>
<Description>TAZORAC (tazarotene) Gel, 0.05% and 0.1% is for topical use and contains the active ingredient, tazarotene. Each gram of TAZORAC Gel, 0.05% and 0.1% contains 0.5 and 1 mg of tazarotene, respectively in a translucent, aqueous gel. Tazarotene is a member of the acetylenic class of retinoids. Chemically, tazarotene is ethyl 6-[(4,4-dimethylthiochroman-6-yl)ethynyl]nicotinate. The compound has an empirical formula of C21H21NO2S and molecular weight of 351.46. The structural formula is shown below. TAZORAC Gel contains the following inactive ingredients. benzyl alcohol 1%;ascorbic acid; butylated hydroxyanisole; butylated hydroxytoluene; carbomer homopolymer type B; edetate disodium; hexylene glycol; poloxamer 407; polyethylene glycol 400; polysorbate 40; purified water; and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>16110-052-12</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE, PLASTIC (16110-052-12) </PackageDescription>
<NDC11Code>16110-0052-12</NDC11Code>
<ProductNDC>16110-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19630319</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013790</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19630319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cordran Lotion is indicated for the relief of the inflammatory and pruritic manifestations of cortico-steroid-responsive dermatoses.</IndicationAndUsage>
<Description>Cordran® (flurandrenolide, USP) is a potent corticosteroid intended for topical use. Flurandrenolide occurs as white to off-white, fluffy, crystalline powder and is odorless. Flurandrenolide is practically insoluble in water and in ether. One g dissolves in 72 mL of alcohol and in 10 mL of chloroform. The molecular weight of flurandrenolide is 436.52. The chemical name of flurandrenolide is Pregn-4-ene-3,20-dione, 6-fluoro-11,21-dihydroxy-16, 17-[(1-methylethylidene)bis (oxy)]-, (6α, 11β, 16α)-; its empirical formula is C24H33FO6. The structure is as follows. Each mL of Cordran Lotion contains 0.5 mg (1.145 µmol) (0.05%) flurandrenolide in an oil-in-water emulsion base composed of glycerin, cetyl alcohol, stearic acid, glyceryl monostearate, mineral oil, polyoxyl 40 stearate, menthol, benzyl alcohol, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>16110-052-15</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE, PLASTIC (16110-052-15)</PackageDescription>
<NDC11Code>16110-0052-15</NDC11Code>
<ProductNDC>16110-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19630319</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013790</ApplicationNumber>
<LabelerName>Aqua Pharmaceuticals</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-11</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>16110-052-60</NDCCode>
<PackageDescription>60 mL in 1 BOTTLE, PLASTIC (16110-052-60)</PackageDescription>
<NDC11Code>16110-0052-60</NDC11Code>
<ProductNDC>16110-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cordran</ProprietaryName>
<NonProprietaryName>Flurandrenolide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19630319</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013790</ApplicationNumber>
<LabelerName>Aqua Pharmaceuticals</LabelerName>
<SubstanceName>FLURANDRENOLIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-11</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>16110-071-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-071-30) > 30 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0071-30</NDC11Code>
<ProductNDC>16110-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Veltin</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100729</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050803</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; TRETINOIN</SubstanceName>
<StrengthNumber>10; .25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.</IndicationAndUsage>
<Description>VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. VELTIN Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>16110-071-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-071-60) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0071-60</NDC11Code>
<ProductNDC>16110-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Veltin</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100729</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050803</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; TRETINOIN</SubstanceName>
<StrengthNumber>10; .25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.</IndicationAndUsage>
<Description>VELTIN (clindamycin phosphate and tretinoin) Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. VELTIN Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>16110-075-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (16110-075-01)</PackageDescription>
<NDC11Code>16110-0075-01</NDC11Code>
<ProductNDC>16110-075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monodox</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070131</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>Aqua Pharmaceuticals, LLC</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE. To reduce the development of drug-resistant bacteria and maintain effectiveness of MONODOX and other antibacterial drugs, MONODOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. MONODOX 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, red iron oxide, and yellow iron oxide for the 50 mg and 100 mg strengths and black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10 for the 75 mg strength.</Description>
</NDC>
<NDC>
<NDCCode>16110-080-02</NDCCode>
<PackageDescription>2 g in 1 TUBE (16110-080-02)</PackageDescription>
<NDC11Code>16110-0080-02</NDC11Code>
<ProductNDC>16110-080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xolegel</ProprietaryName>
<NonProprietaryName>Ketoconazole</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060728</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021946</ApplicationNumber>
<LabelerName>Aqua Pharmaceuticals, LLC.</LabelerName>
<SubstanceName>KETOCONAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC],Azoles [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A5 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-03-27</LastUpdate>
</NDC>
<NDC>
<NDCCode>16110-080-45</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16110-080-45) > 45 g in 1 TUBE</PackageDescription>
<NDC11Code>16110-0080-45</NDC11Code>
<ProductNDC>16110-080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xolegel</ProprietaryName>
<NonProprietaryName>Ketoconazole</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060728</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021946</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>KETOCONAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16110-111-00</NDCCode>
<PackageDescription>1 CAN in 1 CARTON (16110-111-00) > 100 g in 1 CAN</PackageDescription>
<NDC11Code>16110-0111-00</NDC11Code>
<ProductNDC>16110-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verdeso</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20061006</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021978</ApplicationNumber>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VERDESO® (desonide) Foam, 0.05% is indicated for the treatment of mild to moderate atopic dermatitis in patients 3 months of age and older. Patients should be instructed to use VERDESO Foam for the minimum amount of time necessary to achieve the desired results because of the potential for VERDESO Foam to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Treatment should not exceed 4 consecutive weeks.</IndicationAndUsage>
<Description>VERDESO Foam is a white to off-white petrolatum-based emulsion aerosol foam containing the active ingredient desonide, a low-potency topical corticosteroid. Chemically, desonide is (11,16)-11,21-dihydroxy-16,17-[(1-methylethylidene)-bis(oxy)]-pregna-1,4-diene-3,20-dione. The structural formula of desonide is represented below. Desonide has a molecular formula of C24H32O6 and a molecular weight of 416.51. Desonide is a white powder or crystal that is practically insoluble in water, sparingly soluble in ethanol and in acetone, and soluble in chloroform. Each gram of VERDESO Foam contains 0.5 mg desonide. The foam also contains anhydrous citric acid, cetyl alcohol, cyclomethicone, isopropyl myristate, light mineral oil, white petrolatum, polyoxyl 20 cetostearyl ether, potassium citrate (monohydrate), propylene glycol, purified water, sorbitan monolaurate, and phenoxyethanol as a preservative. VERDESO Foam is dispensed from an aluminum can pressurized with a hydrocarbon (propane/butane) propellant.</Description>
</NDC>
<NDC>
<NDCCode>16110-245-00</NDCCode>
<PackageDescription>48000 TABLET, COATED in 1 BAG (16110-245-00) </PackageDescription>
<NDC11Code>16110-0245-00</NDC11Code>
<ProductNDC>16110-245</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Sarecycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<StartMarketingDate>20190104</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Almirall, LLC</LabelerName>
<SubstanceName>SARECYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-05-19</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-JAN-19</StartMarketingDatePackage>
</NDC>
</NDCList>