{
"NDC": [
{
"NDCCode": "16729-726-03",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (16729-726-03) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "16729-0726-03",
"ProductNDC": "16729-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214306",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260804",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC’s BRIDION ®(sugammadex) injection. However, due to Merck Sharp & Dohme LLC’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6 A,6 B,6 C,6 D,6 E,6 F,6 G,6 H-Octakis-S-(2-carboxyethyl)-6 A,6 B,6 C,6 D,6 E,6 F,6 G,6 H-octathio- γ-cyclodextrin sodium salt(1:8) with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear, colorless to slightly yellow-brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.8 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)] . This derivative is chemically designated as 6 A,6 B,6 C,6 D,6 E,6 F,6 G-Heptakis-S-(2-carboxyethyl)-6 A,6 B,6 C,6 D,6 E,6 F,6 G-heptathio- γ-cyclodextrin sodiumsalt (1:7) with a molecular weight of 2067.90. The structural formula is:."
},
{
"NDCCode": "11673-726-03",
"PackageDescription": "200 TABLET, CHEWABLE in 1 BOTTLE (11673-726-03) ",
"NDC11Code": "11673-0726-03",
"ProductNDC": "11673-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antacid",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Calcium Carbonate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20140310",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "Target Corporation",
"SubstanceName": "CALCIUM CARBONATE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20140310",
"SamplePackage": "N",
"IndicationAndUsage": "relieves: 1 heartburn, 2 acid indigestion, 3 sour stomach, 4 upset stomach associated with these symptoms."
},
{
"NDCCode": "49967-726-03",
"PackageDescription": "1 g in 1 PACKET (49967-726-03) ",
"NDC11Code": "49967-0726-03",
"ProductNDC": "49967-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lancome Paris Renergie Lift Multiaction Ultra Lifting Firming Dark Spot Correcting Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Avobenzone, Octisalate And Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191028",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "L'Oreal USA Products Inc",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 50; 70",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191028",
"EndMarketingDatePackage": "20241210",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "50580-726-03",
"PackageDescription": "50 BLISTER PACK in 1 CARTON (50580-726-03) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "50580-0726-03",
"ProductNDC": "50580-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zyrtec Allergy",
"NonProprietaryName": "Cetirizine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019835",
"LabelerName": "Kenvue Brands LLC",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080101",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "51150-726-03",
"PackageDescription": "1 g in 1 PACKET (51150-726-03) ",
"NDC11Code": "51150-0726-03",
"ProductNDC": "51150-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lancome Paris Renergie Lift Multiaction Ultra Lifting Firming Dark Spot Correcting Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Avobenzone, Octisalate And Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191028",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SICOS ET CIE",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 50; 70",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191028",
"EndMarketingDatePackage": "20241210",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "58160-726-15",
"PackageDescription": "1 KIT in 1 CARTON (58160-726-15) * .5 mL in 1 VIAL (58160-816-03) * .85 mL in 1 SYRINGE (58160-817-02) ",
"NDC11Code": "58160-0726-15",
"ProductNDC": "58160-726",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Hiberix",
"NonProprietaryName": "Haemophilus B Conjugate Vaccine (tetanus Toxoid Conjugate)",
"DosageFormName": "KIT",
"StartMarketingDate": "20231220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125347",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Active",
"LastUpdate": "2026-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231220",
"SamplePackage": "N",
"IndicationAndUsage": "HIBERIX is indicated for active immunization for the prevention of invasive disease caused by Haemophilus influenzae (H. influenzae) type b. HIBERIX is approved for use in children aged 6 weeks through 4 years (prior to fifth birthday).",
"Description": "HIBERIX [Haemophilus b Conjugate Vaccine (Tetanus Toxoid Conjugate)] is a solution for intramuscular injection, supplied as a sterile, lyophilized powder which is reconstituted at the time of use with the accompanying saline diluent. HIBERIX contains Haemophilus b capsular polysaccharide (polyribosyl‑ribitol‑phosphate [PRP]), a high molecular weight polymer prepared from the H. influenzae type b strain 20,752 grown in a synthetic medium that undergoes heat inactivation and purification. The tetanus toxin, prepared from Clostridium tetani grown in a semi‑synthetic medium, is detoxified with formaldehyde and purified. The capsular polysaccharide is covalently bound to the tetanus toxoid. After purification, the conjugate is lyophilized in the presence of lactose as a stabilizer. The diluent for HIBERIX is a sterile saline solution (0.9% sodium chloride) supplied in prefilled syringes. After reconstitution, each approximately 0.5‑mL dose of HIBERIX contains 10 mcg of purified capsular polysaccharide conjugated to approximately 25 mcg of tetanus toxoid, 12.6 mg of lactose, and ≤0.5 mcg of residual formaldehyde. HIBERIX does not contain a preservative. The stopper of the vial containing Lyophilized Antigen Component and the tip cap and rubber plunger stopper of the prefilled syringe containing Sterile Saline Diluent are not made with natural rubber latex."
},
{
"NDCCode": "63545-726-03",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (63545-726-03) ",
"NDC11Code": "63545-0726-03",
"ProductNDC": "63545-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acidum Aceticum",
"NonProprietaryName": "Acidum Aceticum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191223",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ACETIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191223",
"SamplePackage": "N"
},
{
"NDCCode": "64679-726-01",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (64679-726-01) > 2 mL in 1 VIAL, SINGLE-DOSE (64679-726-03) ",
"NDC11Code": "64679-0726-01",
"ProductNDC": "64679-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20061227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077716",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20061227",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: : 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient in ondansetron injection, USP is ondansetron hydrochloride, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20-mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron injection is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "64980-726-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (64980-726-03) ",
"NDC11Code": "64980-0726-03",
"ProductNDC": "64980-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209044",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol."
},
{
"NDCCode": "70847-726-03",
"PackageDescription": "1 BAG in 1 CAN (70847-726-03) > 10 kg in 1 BAG",
"NDC11Code": "70847-0726-03",
"ProductNDC": "70847-726",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Benzylpenicillin Procaine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20160801",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "ADL Biopharma SL.",
"SubstanceName": "PENICILLIN G PROCAINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "01-AUG-16"
},
{
"NDCCode": "72450-726-03",
"PackageDescription": "1125 kg in 1 CONTAINER (72450-726-03) ",
"NDC11Code": "72450-0726-03",
"ProductNDC": "72450-726",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".34",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-10-12",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "84756-726-03",
"PackageDescription": "30 mL in 1 BOTTLE (84756-726-03) ",
"NDC11Code": "84756-0726-03",
"ProductNDC": "84756-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitamin C Super Serum Facial Serum",
"NonProprietaryName": "Vitamin C Super Serum Facial Serum",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241212",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241212",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "16729-092-03",
"PackageDescription": "1 VIAL in 1 CARTON (16729-092-03) > 5 mL in 1 VIAL",
"NDC11Code": "16729-0092-03",
"ProductNDC": "16729-092",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine Hydrochloride",
"NonProprietaryName": "Gemcitabine Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091594",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20110728",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine for Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. ( 1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. ( 1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. ( 1.3) , 4 as a single agent for the treatment of pancreatic cancer. ( 1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. Gemcitabine hydrochloride is 2´-deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer) with the following structural formula. The empirical formula for gemcitabine hydrochloride is C 9H 11F 2N 3O 4 HCl. It has a molecular weight of 299.66 g/mol. Gemcitabine hydrochloride is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine for Injection is a sterile white to off-white lyophilized powder and available as 200 mg, 1 g and 2 g single-dose vials for intravenous use only. Each 200 mg vial contains 200 mg gemcitabine (equivalent to 227.7 mg gemcitabine hydrochloride), 200 mg mannitol and 12.5 mg sodium acetate. Each 1 g vial contains 1 g gemcitabine (equivalent to 1.139 g gemcitabine hydrochloride), 1 g mannitol and 62.5 mg sodium acetate. Each 2 g vial contains 2 g gemcitabine (equivalent to 2.277 g gemcitabine hydrochloride), 2 g mannitol and 125 mg sodium acetate. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "16729-229-03",
"PackageDescription": "1 VIAL in 1 CARTON (16729-229-03) / 4 mL in 1 VIAL",
"NDC11Code": "16729-0229-03",
"ProductNDC": "16729-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pemetrexed",
"NonProprietaryName": "Pemetrexed",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203485",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "PEMETREXED DISODIUM HEMIPENTAHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220525",
"SamplePackage": "N",
"IndicationAndUsage": "Pemetrexed for injection is a folate analog metabolic inhibitor indicated: 1 in combination with pembrolizumab and platinum chemotherapy, for the initial treatment of patients with metastatic non-small cell lung cancer (NSCLC), with no EGFR or ALK genomic tumor aberrations. ( 1.1) , 2 in combination with cisplatin for the initial treatment of patients with locally advanced or metastatic, non-squamous NSCLC. ( 1.1) , 3 as a single agent for the maintenance treatment of patients with locally advanced or metastatic, non-squamous NSCLC whose disease has not progressed after four cycles of platinum-based first-line chemotherapy. ( 1.1) , 4 as a single agent for the treatment of patients with recurrent, metastatic non-squamous, NSCLC after prior chemotherapy. ( 1.1) Limitations of Use:Pemetrexed for injection is not indicated for the treatment of patients with squamous cell, non-small cell lung cancer. ( 1.1) , 5 initial treatment, in combination with cisplatin, of patients with malignant pleural mesothelioma whose disease is unresectable or who are otherwise not candidates for curative surgery. ( 1.2) .",
"Description": "Pemetrexed for injection, USP is a folate analog metabolic inhibitor. The drug substance, pemetrexed disodium hemipentahydrate, has the chemical name N-{4-[2-(2-amino-4-oxo-4,7-dihydro-1 H-pyrrolo[2,3- d]pyrimidin-5-yl)ethyl]phenyl] carbonyl}-L-glutamic acid disodium, hemipentahydrate with a molecular formula of C 20H 19N 5Na 2O 62.5H 2O and a molecular weight of 516.41. The structural formula is as follows:. Pemetrexed for injection, USP is a sterile white to either light yellow or greenish yellow lyophilized powder in single-dose vials to be reconstituted for intravenous infusion. Each 100-mg vial of pemetrexed for injection, USP contains 100 mg pemetrexed (equivalent to 120.8 mg pemetrexed disodium hemipentahydrate) and 106 mg mannitol. Each 500-mg vial of pemetrexed for injection, USP contains 500 mg pemetrexed (equivalent to 604 mg pemetrexed disodium hemipentahydrate) and 500 mg mannitol. Each 1-gram vial of pemetrexed for injection, USP contains 1 gram pemetrexed (equivalent to 1.208 gram pemetrexed disodium hemipentahydrate) and 1 gram mannitol. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH."
},
{
"NDCCode": "16729-240-03",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (16729-240-03) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "16729-0240-03",
"ProductNDC": "16729-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosaprepitant",
"NonProprietaryName": "Fosaprepitant",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204025",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "FOSAPREPITANT DIMEGLUMINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20201022",
"SamplePackage": "N",
"IndicationAndUsage": "Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin., 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC).",
"Description": "Fosaprepitant for injection is a sterile, white to off white lyophilized cake or powder formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1 H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its molecular formula is C 23H 22F 7N 4O 6P 2(C 7H 17NO 5) and its structural formula is:. Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of Fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment)."
},
{
"NDCCode": "16729-250-03",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (16729-250-03) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "16729-0250-03",
"ProductNDC": "16729-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bendamustine Hydrochloride",
"NonProprietaryName": "Bendamustine Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205574",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "BENDAMUSTINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221207",
"SamplePackage": "N",
"IndicationAndUsage": "Bendamustine hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. ( 1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. ( 1.2) .",
"Description": "Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride, USP is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1- methyl-, monohydrochloride. Its empirical molecular formula is C 16H 21Cl 2N 3O 2 ∙ HCl, and the molecular weight is 394.7. Bendamustine hydrochloride contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula:. Bendamustine hydrochloride for Injection, USP (25 mg/vial or 100 mg/vial lyophilized powder). Bendamustine hydrochloride for Injection, USP for intravenous use is supplied as a sterile non-pyrogenic white to off-white lyophilized powder in a single-dose vial. Each 25-mg vial contains 25 mg of bendamustine hydrochloride, USP and 42.5 mg of mannitol, USP. Each 100-mg vial contains 100 mg of bendamustine hydrochloride, USP and 170 mg of mannitol, USP. The pH of the reconstituted solution is 2.5 to 3.5."
},
{
"NDCCode": "16729-260-03",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (16729-260-03) > 10 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "16729-0260-03",
"ProductNDC": "16729-260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eptifibatide",
"NonProprietaryName": "Eptifibatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205557",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "EPTIFIBATIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180409",
"SamplePackage": "N",
"IndicationAndUsage": "Eptifibatide Injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .",
"Description": "Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of Eptifibatide and each 100-mL vial contains either 0.75 mg/mL of Eptifibatide or 2 mg/mL of Eptifibatide. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35."
},
{
"NDCCode": "16729-275-67",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (16729-275-67) / 5 mL in 1 VIAL, SINGLE-USE (16729-275-03) ",
"NDC11Code": "16729-0275-67",
"ProductNDC": "16729-275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bivalirudin",
"NonProprietaryName": "Bivalirudin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206551",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "BIVALIRUDIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181107",
"SamplePackage": "N",
"IndicationAndUsage": "Bivalirudin for injection is indicated for use as an anticoagulant for use in patients undergoing percutaneous coronary intervention (PCI) including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.",
"Description": "Bivalirudin for injection contains bivalirudin which is a specific and reversible direct thrombin inhibitor. Bivalirudin is a synthetic, 20 amino acid peptide, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine. The active pharmaceutical ingredient is in the form of bivalirudin trifluoroacetate as a white powder. The chemical name for bivalirudin trifluoroacetate is D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine trifluoroacetate (Figure 1). The molecular weight of bivalirudin is 2180 daltons (anhydrous free base peptide). Figure 1: Structure formula for bivalirudin trifluoroacetate. Bivalirudin for injection is supplied as a sterile white lyophilized cake, in single-dose vials. Each vial contains 250 mg bivalirudin, equivalent to an average of 275 mg of bivalirudin trifluoroacetate*, 125 mg mannitol, and sodium hydroxide to adjust the pH to 5 to 6 (equivalent of approximately 12.5 mg sodium). When reconstituted with Sterile Water for Injection, the product yields a clear, colorless to slightly yellow solution, pH 5 to 6. *The range of bivalirudin trifluoroacetate is 270 mg to 280 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents."
},
{
"NDCCode": "16729-276-68",
"PackageDescription": "10 VIAL in 1 CARTON (16729-276-68) / 10 mL in 1 VIAL (16729-276-03) ",
"NDC11Code": "16729-0276-68",
"ProductNDC": "16729-276",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040743",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140325",
"SamplePackage": "N",
"IndicationAndUsage": "Fluorouracil is indicated for the treatment of patients with.",
"Description": "Fluorouracil injection, USP a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C 4H 3FN 2O 2 Molecular weight: 130.08 g/mole."
},
{
"NDCCode": "16729-277-03",
"PackageDescription": "1 VIAL in 1 CARTON (16729-277-03) / 10 mL in 1 VIAL",
"NDC11Code": "16729-0277-03",
"ProductNDC": "16729-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "20140307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040716",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "METHOTREXATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140307",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the: Treatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen ( 1.1) Prophylaxis and treatment of adult and pediatric patients with meningeal leukemia ( 1.2) Treatment of adult and pediatric patients with non-Hodgkin lymphoma ( 1.3) Treatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen ( 1.4) Treatment of adults with breast cancer as part of a combination chemotherapy regimen ( 1.5) Treatment of adults with squamous cell carcinoma of the head and neck as single-agent ( 1.6) Treatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen ( 1.7) , 2 Treatment of adults with rheumatoid arthritis (RA). ( 1.8) , 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). ( 1.9) , 4 Treatment of adults with severe psoriasis. ( 1.10) .",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C 20H 22N 8O 5, and the structural formula is shown below:. Preservative-free Methotrexate Injection, USP is supplied in sterile single-dose vials for intravenous, intramuscular, subcutaneous, or intrathecal use. : 1 Each 25 mg/mL, 2 mL, 10 mL and 40 mL vial contains methotrexate sodium equivalent to 50 mg, 250 mg and 1000 mg methotrexate , and the following inactive ingredients: Sodium chloride 0.490 %w/v. May contain sodium hydroxide and/or hydrochloric acid to adjust pH to 8.5."
},
{
"NDCCode": "16729-332-03",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (16729-332-03) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "16729-0332-03",
"ProductNDC": "16729-332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxaliplatin",
"NonProprietaryName": "Oxaliplatin",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207474",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "OXALIPLATIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Active",
"LastUpdate": "2024-01-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180517",
"SamplePackage": "N",
"IndicationAndUsage": "Oxaliplatin injection, in combination with infusional fluorouracil and leucovorin, is indicated for: 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor., 2 treatment of advanced colorectal cancer.",
"Description": "Oxaliplatin is a platinum-based drug with the molecular formula C 8H 14N 2O 4Pt and the chemical name of cis-[(1 R,2 R)-1,2-cyclohexanediamine- N, N'] [oxalato(2-)- O, O'] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin injection, USP for intravenous use is supplied in vials containing 50 mg, 100 mg or 200 mg of oxaliplatin as a sterile, preservative-free, aqueous solution at a concentration of 5 mg/mL. Water for Injection, USP is present as an inactive ingredient."
},
{
"NDCCode": "16729-351-92",
"PackageDescription": "8 VIAL, SINGLE-DOSE in 1 CARTON (16729-351-92) / 10 mL in 1 VIAL, SINGLE-DOSE (16729-351-03) ",
"NDC11Code": "16729-0351-92",
"ProductNDC": "16729-351",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Busulfan",
"NonProprietaryName": "Busulfan",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210148",
"LabelerName": "Accord Healthcare, Inc",
"SubstanceName": "BUSULFAN",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190722",
"SamplePackage": "N",
"IndicationAndUsage": "Busulfan Injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia.",
"Description": "Busulfan is a bifunctional alkylating agent known chemically as 1,4-butanediol, dimethanesulfonate. The molecular formula of busulfan is CH 3SO 2O(CH 2) 4OSO 2CH 3with a molecular weight of 246 g/mole. Busulfan has the following chemical structure:. Busulfan Injection is supplied as a clear, colorless, sterile, solution in 10 mL single-dose vials for intravenous administration upon dilution. Each vial contains 60 mg of busulfan in N,N-dimethylacetamide (DMA), 3.3 mL and Polyethylene Glycol 400, NF 6.7 mL. The solubility of busulfan in water is 0.1 g per L and the pH of Busulfan Injection diluted to approximately 0.5 mg per mL busulfan in 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP as recommended for infusion reflects the pH of the diluent used and ranges from 3.5 to 5.5."
},
{
"NDCCode": "16729-364-68",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (16729-364-68) > 10 mL in 1 VIAL, SINGLE-DOSE (16729-364-03) ",
"NDC11Code": "16729-0364-68",
"ProductNDC": "16729-364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tigecycline",
"NonProprietaryName": "Tigecycline",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208744",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "TIGECYCLINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Tetracycline-class Antibacterial [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190328",
"SamplePackage": "N",
"IndicationAndUsage": "Tigecycline for injection is a tetracycline-class antibacterial indicated in patients 18 years of age and older for: : 1 Complicated skin and skin structure infections ( 1.1) , 2 Complicated intra-abdominal infections ( 1.2) , 3 Community-acquired bacterial pneumonia ( 1.3) .",
"Description": "Tigecycline for injection USP is a tetracycline class antibacterial for intravenous infusion. The chemical name of tigecycline USP is (4 S,4a S,5a R,12a S)-9-[2-( tert-butylamino)acetamido]-4,7-bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide. The empirical formula is C 29H 39N 5O 8 and the molecular weight is 585.65. The following represents the chemical structure of tigecycline. Figure 1: Structure of Tigecycline. Tigecycline for injection USP is an orange lyophilized powder or cake. Each Tigecycline for injection USP single-dose 10 mL vial contains 50 mg tigecycline lyophilized powder for reconstitution for intravenous infusion and 100 mg of maltose monohydrate. The pH is adjusted with hydrochloric acid, and if necessary sodium hydroxide. The product does not contain preservatives."
},
{
"NDCCode": "16729-419-03",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (16729-419-03) ",
"NDC11Code": "16729-0419-03",
"ProductNDC": "16729-419",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180125",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209604",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180125",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. ( 1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. ( 1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. ( 1.3) , 4 as a single agent for the treatment of pancreatic cancer. ( 1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. Gemcitabine hydrochloride is 2’-deoxy-2’,2’-difluorocytidine monohydrochloride (β-isomer) with the following molecular structure:. Gemcitabine hydrochloride is a white to off white crystalline powder. The empirical formula for gemcitabine hydrochloride is C 9H 11F 2N 3O 4 HCl and the molecular weight is 299.66. Gemcitabine hydrochloride is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile, clear colorless to pale yellow solution that is provided in 100 mg/mL multiple-dose vials for intravenous use only. Gemcitabine Injection is available in four presentations: 200 mg/2 mL, 1 g/10 mL, 1.5 g/15 mL or 2 g/20 mL. Each mL contains 100 mg of gemcitabine free base (equivalent to 113.85 mg of gemcitabine hydrochloride), 250 mg PEG-300, 150 mg propylene glycol, and 16 mg sodium hydroxide in dehydrated alcohol. Sodium hydroxide and/or hydrochloric acid may have been added for pH adjustment."
},
{
"NDCCode": "16729-465-03",
"PackageDescription": "10 CARTON in 1 CARTON (16729-465-03) / 1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (16729-465-31) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "16729-0465-03",
"ProductNDC": "16729-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213237",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-05-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220311",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine hydrochloride injection, 10 mg/mL, is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride, and is chemically designated as C 9H 13NO 2. HCl with a molecular weight of 203.67 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride USP is a white or practically white, odorless powder. It is freely soluble in water and in alcohol. Phenylephrine hydrochloride injection USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride USP 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5."
},
{
"NDCCode": "16729-466-03",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (16729-466-03) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "16729-0466-03",
"ProductNDC": "16729-466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213237",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-05-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220311",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine hydrochloride injection, 10 mg/mL, is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride, and is chemically designated as C 9H 13NO 2. HCl with a molecular weight of 203.67 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride USP is a white or practically white, odorless powder. It is freely soluble in water and in alcohol. Phenylephrine hydrochloride injection USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride USP 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5."
},
{
"NDCCode": "16729-473-03",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (16729-473-03) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "16729-0473-03",
"ProductNDC": "16729-473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20201210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213238",
"LabelerName": "Accord Healthcare, Inc.,",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201217",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3and the molecular weight is 398.33. Its structural formula is as follows. C 19H 28BrNO 3MW 398.33 Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "16729-474-03",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (16729-474-03) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "16729-0474-03",
"ProductNDC": "16729-474",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20201210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213238",
"LabelerName": "Accord Healthcare, Inc.,",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201210",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3and the molecular weight is 398.33. Its structural formula is as follows. C 19H 28BrNO 3MW 398.33 Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "16729-483-03",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (16729-483-03) / 5 mL in 1 SYRINGE, GLASS",
"NDC11Code": "16729-0483-03",
"ProductNDC": "16729-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212868",
"LabelerName": "Accord Healthcare, Inc.,",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210819",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH 3.0 to 4.0. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2H 2SO 4H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water."
},
{
"NDCCode": "16729-484-03",
"PackageDescription": "10 mL in 1 SYRINGE, GLASS (16729-484-03) ",
"NDC11Code": "16729-0484-03",
"ProductNDC": "16729-484",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212868",
"LabelerName": "Accord Healthcare, Inc.,",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210730",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH 3.0 to 4.0. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2H 2SO 4H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>16729-726-03</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (16729-726-03) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>16729-0726-03</NDC11Code>
<ProductNDC>16729-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214306</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC’s BRIDION ®(sugammadex) injection. However, due to Merck Sharp & Dohme LLC’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6 A,6 B,6 C,6 D,6 E,6 F,6 G,6 H-Octakis-S-(2-carboxyethyl)-6 A,6 B,6 C,6 D,6 E,6 F,6 G,6 H-octathio- γ-cyclodextrin sodium salt(1:8) with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear, colorless to slightly yellow-brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.8 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)] . This derivative is chemically designated as 6 A,6 B,6 C,6 D,6 E,6 F,6 G-Heptakis-S-(2-carboxyethyl)-6 A,6 B,6 C,6 D,6 E,6 F,6 G-heptathio- γ-cyclodextrin sodiumsalt (1:7) with a molecular weight of 2067.90. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>11673-726-03</NDCCode>
<PackageDescription>200 TABLET, CHEWABLE in 1 BOTTLE (11673-726-03) </PackageDescription>
<NDC11Code>11673-0726-03</NDC11Code>
<ProductNDC>11673-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antacid</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Calcium Carbonate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140310</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>CALCIUM CARBONATE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves: 1 heartburn, 2 acid indigestion, 3 sour stomach, 4 upset stomach associated with these symptoms.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49967-726-03</NDCCode>
<PackageDescription>1 g in 1 PACKET (49967-726-03) </PackageDescription>
<NDC11Code>49967-0726-03</NDC11Code>
<ProductNDC>49967-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lancome Paris Renergie Lift Multiaction Ultra Lifting Firming Dark Spot Correcting Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate And Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191028</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>L'Oreal USA Products Inc</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 50; 70</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191028</StartMarketingDatePackage>
<EndMarketingDatePackage>20241210</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50580-726-03</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 CARTON (50580-726-03) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50580-0726-03</NDC11Code>
<ProductNDC>50580-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zyrtec Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019835</ApplicationNumber>
<LabelerName>Kenvue Brands LLC</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51150-726-03</NDCCode>
<PackageDescription>1 g in 1 PACKET (51150-726-03) </PackageDescription>
<NDC11Code>51150-0726-03</NDC11Code>
<ProductNDC>51150-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lancome Paris Renergie Lift Multiaction Ultra Lifting Firming Dark Spot Correcting Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate And Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191028</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SICOS ET CIE</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 50; 70</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191028</StartMarketingDatePackage>
<EndMarketingDatePackage>20241210</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58160-726-15</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-726-15) * .5 mL in 1 VIAL (58160-816-03) * .85 mL in 1 SYRINGE (58160-817-02) </PackageDescription>
<NDC11Code>58160-0726-15</NDC11Code>
<ProductNDC>58160-726</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Hiberix</ProprietaryName>
<NonProprietaryName>Haemophilus B Conjugate Vaccine (tetanus Toxoid Conjugate)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125347</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HIBERIX is indicated for active immunization for the prevention of invasive disease caused by Haemophilus influenzae (H. influenzae) type b. HIBERIX is approved for use in children aged 6 weeks through 4 years (prior to fifth birthday).</IndicationAndUsage>
<Description>HIBERIX [Haemophilus b Conjugate Vaccine (Tetanus Toxoid Conjugate)] is a solution for intramuscular injection, supplied as a sterile, lyophilized powder which is reconstituted at the time of use with the accompanying saline diluent. HIBERIX contains Haemophilus b capsular polysaccharide (polyribosyl‑ribitol‑phosphate [PRP]), a high molecular weight polymer prepared from the H. influenzae type b strain 20,752 grown in a synthetic medium that undergoes heat inactivation and purification. The tetanus toxin, prepared from Clostridium tetani grown in a semi‑synthetic medium, is detoxified with formaldehyde and purified. The capsular polysaccharide is covalently bound to the tetanus toxoid. After purification, the conjugate is lyophilized in the presence of lactose as a stabilizer. The diluent for HIBERIX is a sterile saline solution (0.9% sodium chloride) supplied in prefilled syringes. After reconstitution, each approximately 0.5‑mL dose of HIBERIX contains 10 mcg of purified capsular polysaccharide conjugated to approximately 25 mcg of tetanus toxoid, 12.6 mg of lactose, and ≤0.5 mcg of residual formaldehyde. HIBERIX does not contain a preservative. The stopper of the vial containing Lyophilized Antigen Component and the tip cap and rubber plunger stopper of the prefilled syringe containing Sterile Saline Diluent are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>63545-726-03</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (63545-726-03) </PackageDescription>
<NDC11Code>63545-0726-03</NDC11Code>
<ProductNDC>63545-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acidum Aceticum</ProprietaryName>
<NonProprietaryName>Acidum Aceticum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191223</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ACETIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64679-726-01</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (64679-726-01) > 2 mL in 1 VIAL, SINGLE-DOSE (64679-726-03) </PackageDescription>
<NDC11Code>64679-0726-01</NDC11Code>
<ProductNDC>64679-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20061227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077716</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: : 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient in ondansetron injection, USP is ondansetron hydrochloride, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20-mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron injection is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>64980-726-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (64980-726-03) </PackageDescription>
<NDC11Code>64980-0726-03</NDC11Code>
<ProductNDC>64980-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209044</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>70847-726-03</NDCCode>
<PackageDescription>1 BAG in 1 CAN (70847-726-03) > 10 kg in 1 BAG</PackageDescription>
<NDC11Code>70847-0726-03</NDC11Code>
<ProductNDC>70847-726</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Benzylpenicillin Procaine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20160801</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>ADL Biopharma SL.</LabelerName>
<SubstanceName>PENICILLIN G PROCAINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-AUG-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72450-726-03</NDCCode>
<PackageDescription>1125 kg in 1 CONTAINER (72450-726-03) </PackageDescription>
<NDC11Code>72450-0726-03</NDC11Code>
<ProductNDC>72450-726</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.34</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-10-12</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>84756-726-03</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE (84756-726-03) </PackageDescription>
<NDC11Code>84756-0726-03</NDC11Code>
<ProductNDC>84756-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitamin C Super Serum Facial Serum</ProprietaryName>
<NonProprietaryName>Vitamin C Super Serum Facial Serum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241212</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16729-092-03</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (16729-092-03) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>16729-0092-03</NDC11Code>
<ProductNDC>16729-092</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine Hydrochloride</ProprietaryName>
<NonProprietaryName>Gemcitabine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091594</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine for Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. ( 1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. ( 1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. ( 1.3) , 4 as a single agent for the treatment of pancreatic cancer. ( 1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. Gemcitabine hydrochloride is 2´-deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer) with the following structural formula. The empirical formula for gemcitabine hydrochloride is C 9H 11F 2N 3O 4 HCl. It has a molecular weight of 299.66 g/mol. Gemcitabine hydrochloride is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine for Injection is a sterile white to off-white lyophilized powder and available as 200 mg, 1 g and 2 g single-dose vials for intravenous use only. Each 200 mg vial contains 200 mg gemcitabine (equivalent to 227.7 mg gemcitabine hydrochloride), 200 mg mannitol and 12.5 mg sodium acetate. Each 1 g vial contains 1 g gemcitabine (equivalent to 1.139 g gemcitabine hydrochloride), 1 g mannitol and 62.5 mg sodium acetate. Each 2 g vial contains 2 g gemcitabine (equivalent to 2.277 g gemcitabine hydrochloride), 2 g mannitol and 125 mg sodium acetate. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>16729-229-03</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (16729-229-03) / 4 mL in 1 VIAL</PackageDescription>
<NDC11Code>16729-0229-03</NDC11Code>
<ProductNDC>16729-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pemetrexed</ProprietaryName>
<NonProprietaryName>Pemetrexed</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203485</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>PEMETREXED DISODIUM HEMIPENTAHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220525</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pemetrexed for injection is a folate analog metabolic inhibitor indicated: 1 in combination with pembrolizumab and platinum chemotherapy, for the initial treatment of patients with metastatic non-small cell lung cancer (NSCLC), with no EGFR or ALK genomic tumor aberrations. ( 1.1) , 2 in combination with cisplatin for the initial treatment of patients with locally advanced or metastatic, non-squamous NSCLC. ( 1.1) , 3 as a single agent for the maintenance treatment of patients with locally advanced or metastatic, non-squamous NSCLC whose disease has not progressed after four cycles of platinum-based first-line chemotherapy. ( 1.1) , 4 as a single agent for the treatment of patients with recurrent, metastatic non-squamous, NSCLC after prior chemotherapy. ( 1.1) Limitations of Use:Pemetrexed for injection is not indicated for the treatment of patients with squamous cell, non-small cell lung cancer. ( 1.1) , 5 initial treatment, in combination with cisplatin, of patients with malignant pleural mesothelioma whose disease is unresectable or who are otherwise not candidates for curative surgery. ( 1.2) .</IndicationAndUsage>
<Description>Pemetrexed for injection, USP is a folate analog metabolic inhibitor. The drug substance, pemetrexed disodium hemipentahydrate, has the chemical name N-{4-[2-(2-amino-4-oxo-4,7-dihydro-1 H-pyrrolo[2,3- d]pyrimidin-5-yl)ethyl]phenyl] carbonyl}-L-glutamic acid disodium, hemipentahydrate with a molecular formula of C 20H 19N 5Na 2O 62.5H 2O and a molecular weight of 516.41. The structural formula is as follows:. Pemetrexed for injection, USP is a sterile white to either light yellow or greenish yellow lyophilized powder in single-dose vials to be reconstituted for intravenous infusion. Each 100-mg vial of pemetrexed for injection, USP contains 100 mg pemetrexed (equivalent to 120.8 mg pemetrexed disodium hemipentahydrate) and 106 mg mannitol. Each 500-mg vial of pemetrexed for injection, USP contains 500 mg pemetrexed (equivalent to 604 mg pemetrexed disodium hemipentahydrate) and 500 mg mannitol. Each 1-gram vial of pemetrexed for injection, USP contains 1 gram pemetrexed (equivalent to 1.208 gram pemetrexed disodium hemipentahydrate) and 1 gram mannitol. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>16729-240-03</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (16729-240-03) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>16729-0240-03</NDC11Code>
<ProductNDC>16729-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosaprepitant</ProprietaryName>
<NonProprietaryName>Fosaprepitant</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204025</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>FOSAPREPITANT DIMEGLUMINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin., 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC).</IndicationAndUsage>
<Description>Fosaprepitant for injection is a sterile, white to off white lyophilized cake or powder formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1 H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its molecular formula is C 23H 22F 7N 4O 6P 2(C 7H 17NO 5) and its structural formula is:. Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of Fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).</Description>
</NDC>
<NDC>
<NDCCode>16729-250-03</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (16729-250-03) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>16729-0250-03</NDC11Code>
<ProductNDC>16729-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bendamustine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bendamustine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205574</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>BENDAMUSTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bendamustine hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. ( 1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. ( 1.2) .</IndicationAndUsage>
<Description>Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride, USP is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1- methyl-, monohydrochloride. Its empirical molecular formula is C 16H 21Cl 2N 3O 2 ∙ HCl, and the molecular weight is 394.7. Bendamustine hydrochloride contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula:. Bendamustine hydrochloride for Injection, USP (25 mg/vial or 100 mg/vial lyophilized powder). Bendamustine hydrochloride for Injection, USP for intravenous use is supplied as a sterile non-pyrogenic white to off-white lyophilized powder in a single-dose vial. Each 25-mg vial contains 25 mg of bendamustine hydrochloride, USP and 42.5 mg of mannitol, USP. Each 100-mg vial contains 100 mg of bendamustine hydrochloride, USP and 170 mg of mannitol, USP. The pH of the reconstituted solution is 2.5 to 3.5.</Description>
</NDC>
<NDC>
<NDCCode>16729-260-03</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (16729-260-03) > 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>16729-0260-03</NDC11Code>
<ProductNDC>16729-260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eptifibatide</ProprietaryName>
<NonProprietaryName>Eptifibatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205557</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>EPTIFIBATIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eptifibatide Injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
<Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2 and a molecular weight of 831.96. Each 10-mL vial contains 2 mg/mL of Eptifibatide and each 100-mL vial contains either 0.75 mg/mL of Eptifibatide or 2 mg/mL of Eptifibatide. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
</NDC>
<NDC>
<NDCCode>16729-275-67</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (16729-275-67) / 5 mL in 1 VIAL, SINGLE-USE (16729-275-03) </PackageDescription>
<NDC11Code>16729-0275-67</NDC11Code>
<ProductNDC>16729-275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bivalirudin</ProprietaryName>
<NonProprietaryName>Bivalirudin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206551</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>BIVALIRUDIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bivalirudin for injection is indicated for use as an anticoagulant for use in patients undergoing percutaneous coronary intervention (PCI) including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
<Description>Bivalirudin for injection contains bivalirudin which is a specific and reversible direct thrombin inhibitor. Bivalirudin is a synthetic, 20 amino acid peptide, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine. The active pharmaceutical ingredient is in the form of bivalirudin trifluoroacetate as a white powder. The chemical name for bivalirudin trifluoroacetate is D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine trifluoroacetate (Figure 1). The molecular weight of bivalirudin is 2180 daltons (anhydrous free base peptide). Figure 1: Structure formula for bivalirudin trifluoroacetate. Bivalirudin for injection is supplied as a sterile white lyophilized cake, in single-dose vials. Each vial contains 250 mg bivalirudin, equivalent to an average of 275 mg of bivalirudin trifluoroacetate*, 125 mg mannitol, and sodium hydroxide to adjust the pH to 5 to 6 (equivalent of approximately 12.5 mg sodium). When reconstituted with Sterile Water for Injection, the product yields a clear, colorless to slightly yellow solution, pH 5 to 6. *The range of bivalirudin trifluoroacetate is 270 mg to 280 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
</NDC>
<NDC>
<NDCCode>16729-276-68</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (16729-276-68) / 10 mL in 1 VIAL (16729-276-03) </PackageDescription>
<NDC11Code>16729-0276-68</NDC11Code>
<ProductNDC>16729-276</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040743</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.</IndicationAndUsage>
<Description>Fluorouracil injection, USP a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C 4H 3FN 2O 2 Molecular weight: 130.08 g/mole.</Description>
</NDC>
<NDC>
<NDCCode>16729-277-03</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (16729-277-03) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>16729-0277-03</NDC11Code>
<ProductNDC>16729-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20140307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040716</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>METHOTREXATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the: Treatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen ( 1.1) Prophylaxis and treatment of adult and pediatric patients with meningeal leukemia ( 1.2) Treatment of adult and pediatric patients with non-Hodgkin lymphoma ( 1.3) Treatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen ( 1.4) Treatment of adults with breast cancer as part of a combination chemotherapy regimen ( 1.5) Treatment of adults with squamous cell carcinoma of the head and neck as single-agent ( 1.6) Treatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen ( 1.7) , 2 Treatment of adults with rheumatoid arthritis (RA). ( 1.8) , 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). ( 1.9) , 4 Treatment of adults with severe psoriasis. ( 1.10) .</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C 20H 22N 8O 5, and the structural formula is shown below:. Preservative-free Methotrexate Injection, USP is supplied in sterile single-dose vials for intravenous, intramuscular, subcutaneous, or intrathecal use. : 1 Each 25 mg/mL, 2 mL, 10 mL and 40 mL vial contains methotrexate sodium equivalent to 50 mg, 250 mg and 1000 mg methotrexate , and the following inactive ingredients: Sodium chloride 0.490 %w/v. May contain sodium hydroxide and/or hydrochloric acid to adjust pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>16729-332-03</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (16729-332-03) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>16729-0332-03</NDC11Code>
<ProductNDC>16729-332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxaliplatin</ProprietaryName>
<NonProprietaryName>Oxaliplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207474</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>OXALIPLATIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxaliplatin injection, in combination with infusional fluorouracil and leucovorin, is indicated for: 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor., 2 treatment of advanced colorectal cancer.</IndicationAndUsage>
<Description>Oxaliplatin is a platinum-based drug with the molecular formula C 8H 14N 2O 4Pt and the chemical name of cis-[(1 R,2 R)-1,2-cyclohexanediamine- N, N'] [oxalato(2-)- O, O'] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin injection, USP for intravenous use is supplied in vials containing 50 mg, 100 mg or 200 mg of oxaliplatin as a sterile, preservative-free, aqueous solution at a concentration of 5 mg/mL. Water for Injection, USP is present as an inactive ingredient.</Description>
</NDC>
<NDC>
<NDCCode>16729-351-92</NDCCode>
<PackageDescription>8 VIAL, SINGLE-DOSE in 1 CARTON (16729-351-92) / 10 mL in 1 VIAL, SINGLE-DOSE (16729-351-03) </PackageDescription>
<NDC11Code>16729-0351-92</NDC11Code>
<ProductNDC>16729-351</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Busulfan</ProprietaryName>
<NonProprietaryName>Busulfan</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210148</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc</LabelerName>
<SubstanceName>BUSULFAN</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Busulfan Injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia.</IndicationAndUsage>
<Description>Busulfan is a bifunctional alkylating agent known chemically as 1,4-butanediol, dimethanesulfonate. The molecular formula of busulfan is CH 3SO 2O(CH 2) 4OSO 2CH 3with a molecular weight of 246 g/mole. Busulfan has the following chemical structure:. Busulfan Injection is supplied as a clear, colorless, sterile, solution in 10 mL single-dose vials for intravenous administration upon dilution. Each vial contains 60 mg of busulfan in N,N-dimethylacetamide (DMA), 3.3 mL and Polyethylene Glycol 400, NF 6.7 mL. The solubility of busulfan in water is 0.1 g per L and the pH of Busulfan Injection diluted to approximately 0.5 mg per mL busulfan in 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP as recommended for infusion reflects the pH of the diluent used and ranges from 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>16729-364-68</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (16729-364-68) > 10 mL in 1 VIAL, SINGLE-DOSE (16729-364-03) </PackageDescription>
<NDC11Code>16729-0364-68</NDC11Code>
<ProductNDC>16729-364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tigecycline</ProprietaryName>
<NonProprietaryName>Tigecycline</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208744</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>TIGECYCLINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antibacterial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tigecycline for injection is a tetracycline-class antibacterial indicated in patients 18 years of age and older for: : 1 Complicated skin and skin structure infections ( 1.1) , 2 Complicated intra-abdominal infections ( 1.2) , 3 Community-acquired bacterial pneumonia ( 1.3) .</IndicationAndUsage>
<Description>Tigecycline for injection USP is a tetracycline class antibacterial for intravenous infusion. The chemical name of tigecycline USP is (4 S,4a S,5a R,12a S)-9-[2-( tert-butylamino)acetamido]-4,7-bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide. The empirical formula is C 29H 39N 5O 8 and the molecular weight is 585.65. The following represents the chemical structure of tigecycline. Figure 1: Structure of Tigecycline. Tigecycline for injection USP is an orange lyophilized powder or cake. Each Tigecycline for injection USP single-dose 10 mL vial contains 50 mg tigecycline lyophilized powder for reconstitution for intravenous infusion and 100 mg of maltose monohydrate. The pH is adjusted with hydrochloric acid, and if necessary sodium hydroxide. The product does not contain preservatives.</Description>
</NDC>
<NDC>
<NDCCode>16729-419-03</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (16729-419-03) </PackageDescription>
<NDC11Code>16729-0419-03</NDC11Code>
<ProductNDC>16729-419</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180125</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209604</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. ( 1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. ( 1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. ( 1.3) , 4 as a single agent for the treatment of pancreatic cancer. ( 1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. Gemcitabine hydrochloride is 2’-deoxy-2’,2’-difluorocytidine monohydrochloride (β-isomer) with the following molecular structure:. Gemcitabine hydrochloride is a white to off white crystalline powder. The empirical formula for gemcitabine hydrochloride is C 9H 11F 2N 3O 4 HCl and the molecular weight is 299.66. Gemcitabine hydrochloride is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile, clear colorless to pale yellow solution that is provided in 100 mg/mL multiple-dose vials for intravenous use only. Gemcitabine Injection is available in four presentations: 200 mg/2 mL, 1 g/10 mL, 1.5 g/15 mL or 2 g/20 mL. Each mL contains 100 mg of gemcitabine free base (equivalent to 113.85 mg of gemcitabine hydrochloride), 250 mg PEG-300, 150 mg propylene glycol, and 16 mg sodium hydroxide in dehydrated alcohol. Sodium hydroxide and/or hydrochloric acid may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>16729-465-03</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (16729-465-03) / 1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (16729-465-31) / 5 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>16729-0465-03</NDC11Code>
<ProductNDC>16729-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213237</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine hydrochloride injection, 10 mg/mL, is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride, and is chemically designated as C 9H 13NO 2. HCl with a molecular weight of 203.67 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride USP is a white or practically white, odorless powder. It is freely soluble in water and in alcohol. Phenylephrine hydrochloride injection USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride USP 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5.</Description>
</NDC>
<NDC>
<NDCCode>16729-466-03</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (16729-466-03) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>16729-0466-03</NDC11Code>
<ProductNDC>16729-466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213237</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine hydrochloride injection, 10 mg/mL, is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine hydrochloride injection USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride, and is chemically designated as C 9H 13NO 2. HCl with a molecular weight of 203.67 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride USP is a white or practically white, odorless powder. It is freely soluble in water and in alcohol. Phenylephrine hydrochloride injection USP, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride USP 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5.</Description>
</NDC>
<NDC>
<NDCCode>16729-473-03</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (16729-473-03) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>16729-0473-03</NDC11Code>
<ProductNDC>16729-473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20201210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213238</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.,</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3and the molecular weight is 398.33. Its structural formula is as follows. C 19H 28BrNO 3MW 398.33 Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>16729-474-03</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (16729-474-03) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>16729-0474-03</NDC11Code>
<ProductNDC>16729-474</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20201210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213238</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.,</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3and the molecular weight is 398.33. Its structural formula is as follows. C 19H 28BrNO 3MW 398.33 Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>16729-483-03</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (16729-483-03) / 5 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>16729-0483-03</NDC11Code>
<ProductNDC>16729-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212868</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.,</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH 3.0 to 4.0. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2H 2SO 4H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>16729-484-03</NDCCode>
<PackageDescription>10 mL in 1 SYRINGE, GLASS (16729-484-03) </PackageDescription>
<NDC11Code>16729-0484-03</NDC11Code>
<ProductNDC>16729-484</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212868</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.,</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH 3.0 to 4.0. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2H 2SO 4H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
</NDC>
</NDCList>