RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>17271-720-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-720-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0720-06</NDC11Code>
    <ProductNDC>17271-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-720-02</NDCCode>
    <PackageDescription>60 BAG in 1 CASE (17271-720-02)  / 50 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0720-02</NDC11Code>
    <ProductNDC>17271-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180731</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-720-03</NDCCode>
    <PackageDescription>50 BAG in 1 CASE (17271-720-03)  / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0720-03</NDC11Code>
    <ProductNDC>17271-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-720-05</NDCCode>
    <PackageDescription>30 BAG in 1 CASE (17271-720-05)  / 250 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0720-05</NDC11Code>
    <ProductNDC>17271-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-720-07</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (17271-720-07)  / 1000 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0720-07</NDC11Code>
    <ProductNDC>17271-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-700-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-700-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0700-06</NDC11Code>
    <ProductNDC>17271-700</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180723</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208122</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180723</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-701-06</NDCCode>
    <PackageDescription>500 mL in 1 BAG (17271-701-06) </PackageDescription>
    <NDC11Code>17271-0701-06</NDC11Code>
    <ProductNDC>17271-701</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170919</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-703-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-703-06)  &gt; 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0703-06</NDC11Code>
    <ProductNDC>17271-703</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>3% Sodium Chloride</ProprietaryName>
    <NonProprietaryName>3% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209476</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-02-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>3% Sodium Chloride Injection is indicated as a source of water and electrolytes.</IndicationAndUsage>
    <Description>3% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-710-06</NDCCode>
    <PackageDescription>20 BAG in 1 CARTON (17271-710-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0710-06</NDC11Code>
    <ProductNDC>17271-710</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactated Ringers</ProprietaryName>
    <NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190128</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209338</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
    <StrengthNumber>600; 310; 30; 20</StrengthNumber>
    <StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lactated Ringer's Injection is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
    <Description>Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-721-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-721-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0721-06</NDC11Code>
    <ProductNDC>17271-721</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200205</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209448</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-03-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
    <Description>10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-734-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-734-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0734-06</NDC11Code>
    <ProductNDC>17271-734</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211276</ApplicationNumber>
    <LabelerName>BECTON DICKINSON AND COMPANY</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>5; .45</StrengthNumber>
    <StrengthUnit>g/100mL; g/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose and 0.45% Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing 5 grams per 100 mL of Dextrose monohydrate and 0.45 grams per 100 mL of Sodium Chloride in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose and 0.45% Sodium Chloride Injection, USP contains dextrose, hydrous 5 g and sodium chloride 0.45 g in water for injection. Electrolytes per 1000 mL: sodium (Na+), 77 mEq; chloride (Cl-) 77 mEq. The osmolarity is 406 mOsmol/L (calc.), which is hypertonic. The caloric value is 170 kcal/L. The pH is 4.3 (3.5 to 6.5). 5% Dextrose and 0.45% Sodium Chloride Injection, USP contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose and 0.45% Sodium Chloride Injection, USP is a parenteral fluid, nutrient and electrolyte replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>17271-735-06</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (17271-735-06)  / 500 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0735-06</NDC11Code>
    <ProductNDC>17271-735</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose And Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211211</ApplicationNumber>
    <LabelerName>BECTON DICKINSON AND COMPANY</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>5; .9</StrengthNumber>
    <StrengthUnit>g/100mL; g/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose and sodium chloride are indicated for parenteral replenishment of fluid, minimal carbohydrate calories, and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>Dextrose and Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are large volume parenteral solutions containing 5 grams per 100 mL of Dextrose monohydrate and 0.9 grams per 100 mL of Sodium Chloride in water for injection intended for intravenous administration. Electrolytes per 1000 mL: sodium (Na+), 154 mEq; chloride (Cl-) 154 mEq. The osmolarity is 560 mOsmol/L (calc.), which is hypertonic. The caloric value is 170 kcal/L. The pH is 4.3 (3.5 to 6.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid, nutrient and electrolyte replenishers. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>51486-720-06</NDCCode>
    <PackageDescription>7051 L in 1 CYLINDER (51486-720-06) </PackageDescription>
    <NDC11Code>51486-0720-06</NDC11Code>
    <ProductNDC>51486-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxygen</ProprietaryName>
    <NonProprietaryName>Oxygen</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19900101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205865</ApplicationNumber>
    <LabelerName>ILMO Products Company</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>990</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19900101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>51887-720-06</NDCCode>
    <PackageDescription>248 L in 1 CYLINDER (51887-720-06) </PackageDescription>
    <NDC11Code>51887-0720-06</NDC11Code>
    <ProductNDC>51887-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxygen</ProprietaryName>
    <NonProprietaryName>Oxygen</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19890101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205767</ApplicationNumber>
    <LabelerName>Maine Oxy-Acetylene Supply Company</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>990</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19890101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>55289-720-06</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE, PLASTIC (55289-720-06) </PackageDescription>
    <NDC11Code>55289-0720-06</NDC11Code>
    <ProductNDC>55289-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acetazolamide</ProprietaryName>
    <NonProprietaryName>Acetazolamide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19970528</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040195</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>ACETAZOLAMIDE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure. Acetazolamide Tablets are also indicated for the prevention or amelioration of symptoms associated with acute mountain sickness in climbers attempting rapid ascent and in those who are very susceptible to acute mountain sickness despite gradual ascent.</IndicationAndUsage>
    <Description>Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1,3,4-thiadiazol-2-yl)-acetamide and has the following chemical structure:. Molecular Weight: 222.25. Molecular Formula: C 4H 6N 4O 3S 2. Acetazolamide is available as oral tablets containing 125 mg and 250 mg of acetazolamide, respectively, and the following inactive ingredients: corn starch, gelatin, glycerin, lactose monohydrate, magnesium stearate, purified water, sodium starch glycolate and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>64380-720-06</NDCCode>
    <PackageDescription>100 CAPSULE in 1 CONTAINER (64380-720-06) </PackageDescription>
    <NDC11Code>64380-0720-06</NDC11Code>
    <ProductNDC>64380-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201005</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090687</ApplicationNumber>
    <LabelerName>Strides Pharma Science Limited</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201005</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus capsule is a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, heart transplants, and pediatric patients receiving allogeneic liver transplants, in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
    <Description>Tacrolimus, previously known as FK506, is the active ingredient in Tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R* [E(1S*,3S*,4S*)], 4S*,5R*,8S*, 9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]5,6,8,11,12,13,14,15,16, 17,18, 19,24, 25,26, 26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has an empirical formula of C44H69NO12●H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform. Tacrolimus is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include croscarmellose sodium NF, hypromellose USP, lactose monohydrate NF, and magnesium stearate NF. The 0.5 mg capsule shell contains, FD &amp; C Blue 1, FD &amp; C Red 40, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains FD &amp; C Blue 1, gelatin NF, iron oxide yellow and titanium dioxide USP, and the 5 mg capsule shell contains D &amp; C Red 28, D &amp; C Yellow 10, FD &amp; C Blue 1, gelatin NF, and titanium dioxide USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-720-06</NDCCode>
    <PackageDescription>30 CAPSULE, COATED PELLETS in 1 BOTTLE (68382-720-06) </PackageDescription>
    <NDC11Code>68382-0720-06</NDC11Code>
    <ProductNDC>68382-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED PELLETS</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170608</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206134</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170608</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Budesonide delayed-release capsules are corticosteroid indicated for: 1 Treatment of mild to moderate active Crohn's disease involving the ileum and/or the ascending colon, in patients 8 years and older. (1.1), 2 Maintenance of clinical remission of mild to moderate Crohn's disease involving the ileum and/or the ascending colon for up to 3 months in adults. (1.2).</IndicationAndUsage>
    <Description>Budesonide USP, the active ingredient of budesonide delayed-release capsules, is a synthetic corticosteroid. Budesonide is designated chemically as (RS)-11β, 16α, 17, 21- tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5.  Its structural formula is:. Budesonide, USP is a white to off-white, odorless, crystalline powder that is practically insoluble in water and heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 5 is 1.6 x 103ionic strength 0.01. Each capsule for oral administration contains 3 mg of micronized budesonide with the following inactive ingredients: acetyltributyl citrate, ethylcellulose aqueous dispersion, gelatin, iron oxide red, iron oxide yellow, methacrylic acid copolymer dispersion, polysorbate 80, simethicone emulsion, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. The capsule shell is printed with black pharmaceutical ink which contains following ingredients: iron oxide black, potassium hydroxide, propylene glycol and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>69933-720-06</NDCCode>
    <PackageDescription>1 BAG in 1 POUCH (69933-720-06)  / 2 PACKAGE in 1 BAG / 12 PATCH in 1 PACKAGE / 40.301 mg in 1 PATCH</PackageDescription>
    <NDC11Code>69933-0720-06</NDC11Code>
    <ProductNDC>69933-720</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Amberglow Blemish Patches</ProprietaryName>
    <NonProprietaryName>Salicylic Acid</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20260727</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Pearl World Inc.</LabelerName>
    <SubstanceName>SALICYLIC ACID</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/100mg</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260727</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FOR THE TREATMENT OF ACNE.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>74833-720-06</NDCCode>
    <PackageDescription>950 mL in 1 BOTTLE, PUMP (74833-720-06) </PackageDescription>
    <NDC11Code>74833-0720-06</NDC11Code>
    <ProductNDC>74833-720</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer 70% Gel Solution</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200612</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>U.S. Oil Chem, LLC</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>2649</StrengthNumber>
    <StrengthUnit>mL/3783mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200612</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>17271-245-03</NDCCode>
    <PackageDescription>10 CARTON in 1 BOX (17271-245-03)  &gt; 30 PACKAGE in 1 CARTON &gt; 11 mL in 1 PACKAGE</PackageDescription>
    <NDC11Code>17271-0245-03</NDC11Code>
    <ProductNDC>17271-245</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Bd E-z Scrub</ProprietaryName>
    <NonProprietaryName>Povidone-iodine</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>19950601</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333E</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>POVIDONE-IODINE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19950601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>17271-750-07</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (17271-750-07)  / 1000 mL in 1 BAG</PackageDescription>
    <NDC11Code>17271-0750-07</NDC11Code>
    <ProductNDC>17271-750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Water</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209689</ApplicationNumber>
    <LabelerName>Becton Dickinson and Company</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mL/1000mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-06-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sterile Water for Injection is indicated for use only as a solvent or diluent vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced. For intravenous administration, an osmolar concentration not less than two-fifths (0.4) of the normal osmolarity of the extracellular fluid (280 mOsmol/liter) is essential to avoid intravascular hemolysis.</IndicationAndUsage>
    <Description>Sterile Water for Injection, USP is a sterile, nonpyrogenic, solute-free preparation of distilled water for injection. It is for use only as a sterile solvent or diluent vehicle for drugs or solutions suitable for parenteral administration. The pH is 5.5 (5.0 to 7.0). Sterile Water for Injection contains no bacteriostat, antimicrobial agent or added. buffer and is intended only for single dose injection after admixture with an appropriate solute or solution. When smaller amounts are required, the unused portion should be discarded. Sterile Water for Injection is a pharmaceutic aid (vehicle) and parenteral fluid replenisher after addition of an appropriate solute. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film. containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>12546-110-04</NDCCode>
    <PackageDescription>720 LOZENGE in 1 CONTAINER, FLEXIBLE INTERMEDIATE BULK (12546-110-04) </PackageDescription>
    <NDC11Code>12546-0110-04</NDC11Code>
    <ProductNDC>12546-110</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Halls</ProprietaryName>
    <ProprietaryNameSuffix>Honey Lemon</ProprietaryNameSuffix>
    <NonProprietaryName>Menthol</NonProprietaryName>
    <DosageFormName>LOZENGE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190324</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Mondelez Global LLC</LabelerName>
    <SubstanceName>MENTHOL</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-10-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>24208-720-02</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (24208-720-02)  &gt; 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>24208-0720-02</NDC11Code>
    <ProductNDC>24208-720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
    <NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19960726</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040069</ApplicationNumber>
    <LabelerName>Bausch &amp; Lomb Incorporated</LabelerName>
    <SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19960726</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of the following conditions. Ophthalmic: Steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe, such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitis when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation; corneal injury from chemical or thermal burns, or penetration of foreign bodies. Otic: Steroid responsive inflammatory conditions of the external auditory meatus, such as allergic otitis externa, selected purulent and nonpurulent infective otitis externa when the hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation.</IndicationAndUsage>
    <Description>Dexamethasone sodium phosphate ophthalmic solution is a clear, colorless to pale yellow topical steroid solution for ophthalmic or otic administration. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic. Dexamethasone is a synthetic analog of naturally occurring glucocorticoids (hydrocortisone and cortisone). Dexamethasone sodium phosphate is a water soluble, inorganic ester of dexamethasone. It is approximately three thousand times more soluble in water at 25°C than hydrocortisone. Chemical Name: 9-fluoro-11β, 17-dihydroxy-16α-methyl-21-[phosphonooxy]pregna-1,4-diene-3, 20-dione disodium salt. Each mL contains: Active: dexamethasone sodium phosphate [equivalent to 1 mg (0.1%) dexamethasone phosphate]. Inactives: sodium citrate, sodium borate, creatinine, polysorbate 80, edetate disodium dihydrate, purified water. Hydrochloric acid may be added to adjust pH (6.6-7.8).Preservatives: sodium bisulfite 0.1%, phenylethyl alcohol 0.25%, benzalkonium chloride 0.02%.</Description>
  </NDC>
  <NDC>
    <NDCCode>30142-720-23</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (30142-720-23)  / 72 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>30142-0720-23</NDC11Code>
    <ProductNDC>30142-720</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acetaminophen And Ibuprofen</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230516</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214836</ApplicationNumber>
    <LabelerName>Kroger Company</LabelerName>
    <SubstanceName>ACETAMINOPHEN; IBUPROFEN</SubstanceName>
    <StrengthNumber>250; 125</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230516</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves minor aches and pains due to:. headache . toothache. backache . menstrual cramps. muscular aches . minor pain of arthritis.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>31722-556-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (31722-556-12) </PackageDescription>
    <NDC11Code>31722-0556-12</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-31</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (31722-556-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0556-31</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-32</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (31722-556-32)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0556-32</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (31722-556-60) </PackageDescription>
    <NDC11Code>31722-0556-60</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-603-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (31722-603-12) </PackageDescription>
    <NDC11Code>31722-0603-12</NDC11Code>
    <ProductNDC>31722-603</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>100; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-603-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (31722-603-60) </PackageDescription>
    <NDC11Code>31722-0603-60</NDC11Code>
    <ProductNDC>31722-603</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>100; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
</NDCList>