{
"NDC": [
{
"NDCCode": "17856-3566-1",
"PackageDescription": "2 mL in 1 CUP (17856-3566-1) ",
"NDC11Code": "17856-3566-01",
"ProductNDC": "17856-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20020430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075873",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240521",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "17856-3566-3",
"PackageDescription": "5 mL in 1 CUP (17856-3566-3) ",
"NDC11Code": "17856-3566-03",
"ProductNDC": "17856-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20020430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075873",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240521",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "17856-3566-5",
"PackageDescription": "48 SYRINGE in 1 BOX, UNIT-DOSE (17856-3566-5) / 5 mL in 1 SYRINGE",
"NDC11Code": "17856-3566-05",
"ProductNDC": "17856-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20020430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075873",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240521",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0002-3566-11",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-3566-11) / 2.4 mL in 1 SYRINGE (0002-3566-01) ",
"NDC11Code": "00002-3566-11",
"ProductNDC": "0002-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260120",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "4.17",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260120",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-3566-99",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-3566-99) / 2.4 mL in 1 SYRINGE",
"NDC11Code": "00002-3566-99",
"ProductNDC": "0002-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260120",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "4.17",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260301",
"SamplePackage": "Y",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0054-3566-99",
"PackageDescription": "118 mL in 1 BOTTLE, GLASS (0054-3566-99) ",
"NDC11Code": "00054-3566-99",
"ProductNDC": "0054-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20020430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075873",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020430",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with bitterness modifier, artificial cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol solution, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. Midazolam Open-ring Form. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "0378-3566-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0378-3566-01) ",
"NDC11Code": "00378-3566-01",
"ProductNDC": "0378-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"EndMarketingDate": "20190331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076584",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC],Diphosphonates [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20080804",
"EndMarketingDatePackage": "20190331",
"SamplePackage": "N"
},
{
"NDCCode": "0378-3566-93",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (0378-3566-93)",
"NDC11Code": "00378-3566-93",
"ProductNDC": "0378-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076584",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC],Diphosphonates [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "0480-3566-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0480-3566-01) ",
"NDC11Code": "00480-3566-01",
"ProductNDC": "0480-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20241217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202802",
"LabelerName": "Teva Pharmaceuticals, Inc.",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241217",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine dimesylate capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells contain gelatin and titanium dioxide. The 10 mg capsule shells also contain D&C Red #28, FD&C Blue #1, and FD&C Red #40. The 20 mg capsule shells also contain yellow iron oxide. The 30 mg capsule shells also contain D&C Red #28, FD&C Blue #1, FD&C Red #40 and yellow iron oxide. The 40 mg capsule shells also contain D&C Yellow #10, FD&C Green #3, and yellow iron oxide. The 50 mg capsule shells also contain FD&C Blue #1 and yellow iron oxide. The 60 mg capsule shells also contain D&C Yellow #10 and FD&C Green #3. The 70 mg capsule shells also contain FD&C Red #40 and yellow iron oxide. The capsules are printed with black ink which contains black iron oxide, potassium hydroxide, propylene glycol, and shellac."
},
{
"NDCCode": "37662-3566-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-3566-1) ",
"NDC11Code": "37662-3566-01",
"ProductNDC": "37662-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aluminium Fluoratum",
"NonProprietaryName": "Aluminium Fluoratum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230710",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALUMINUM FLUORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230710",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3566-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-3566-2) ",
"NDC11Code": "37662-3566-02",
"ProductNDC": "37662-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aluminium Fluoratum",
"NonProprietaryName": "Aluminium Fluoratum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230710",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALUMINUM FLUORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230710",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3566-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-3566-3) ",
"NDC11Code": "37662-3566-03",
"ProductNDC": "37662-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aluminium Fluoratum",
"NonProprietaryName": "Aluminium Fluoratum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230710",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALUMINUM FLUORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230710",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3566-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-3566-4) ",
"NDC11Code": "37662-3566-04",
"ProductNDC": "37662-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aluminium Fluoratum",
"NonProprietaryName": "Aluminium Fluoratum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230710",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ALUMINUM FLUORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230710",
"SamplePackage": "N"
},
{
"NDCCode": "50090-3566-0",
"PackageDescription": "1 BOTTLE in 1 CARTON (50090-3566-0) > 5 mL in 1 BOTTLE",
"NDC11Code": "50090-3566-00",
"ProductNDC": "50090-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20151207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206306",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "1.11",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine hydrochloride ophthalmic solution USP, 0.1% is indicated for the treatment of the signs and symptoms of allergic conjunctivitis.",
"Description": "Olopatadine hydrochloride ophthalmic solution USP, 0.1% is a sterile ophthalmic solution containing olopatadine, a relatively selective H1 -receptor antagonist and inhibitor of histamine release from the mast cell for topical administration to the eyes. Olopatadine hydrochloride is a white, crystalline, water-soluble powder with a molecular weight of 373.88. The chemical structure is presented below. Chemical Name: 11-[(Z)-3-(Dimethylamino)propylidene]-6-11-dihydrodibenz[b,e] oxepin-2-acetic acid hydrochloride. Each mL of Olopatadine hydrochloride ophthalmic solution, USP contains:. Active: 1.11 mg olopatadine hydrochloride, USP equivalent to 1 mg olopatadine. Preservative: benzalkonium chloride 0.01%. Inactives: dibasic sodium phosphate; sodium chloride; hydrochloric acid/sodium hydroxide (adjust pH); and water for injection. It has a pH of approximately 7 and an osmolality of approximately 300 mOsm/kg."
},
{
"NDCCode": "54868-3566-0",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (54868-3566-0) > 1 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "54868-3566-00",
"ProductNDC": "54868-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20070110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074300",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).",
"Description": "Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative."
},
{
"NDCCode": "54868-3566-1",
"PackageDescription": "1 VIAL in 1 BOX (54868-3566-1) > 1 mL in 1 VIAL",
"NDC11Code": "54868-3566-01",
"ProductNDC": "54868-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20070110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074300",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).",
"Description": "Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative."
},
{
"NDCCode": "54868-3566-2",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (54868-3566-2) > 1 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "54868-3566-02",
"ProductNDC": "54868-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20070110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074300",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).",
"Description": "Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative."
},
{
"NDCCode": "55154-3566-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-3566-0) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-3566-00",
"ProductNDC": "55154-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077580",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080103",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol is indicated for use in the management of manifestations of psychotic disorders. Haloperidol is indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol is effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol is also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4'-fluorobutyrophenone. It has the following structural formula. Each haloperidol tablet, USP intended for oral administration contains haloperidol, USP 0.5 mg or 1 mg or 2 mg or 5 mg or 10 mg or 20 mg. In addition each 0.5 mg, 1 mg, 2 mg tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize) and each 5 mg, 10 mg, 20 mg tablet contains the following inactive ingredients: calcium stearate, dibasic calcium phosphate dihydrate, povidone (PVP K 30), sodium starch glycolate and starch. 1 mg: D&C Yellow #10 Aluminium Lake, FD&C Yellow #6 Aluminium Lake; 2 mg: D & C Red #27 Aluminum Lake; 5 mg: D & C Yellow #10 Aluminum Lake and FD & C Blue #1 Aluminum Lake; 10 mg: D & C Yellow #10 Aluminum Lake and FD & C Blue #1 Aluminum Lake; 20 mg: FD & C Yellow #6 Aluminum Lake and D & C Red #27 Aluminum Lake."
},
{
"NDCCode": "62670-3566-3",
"PackageDescription": "242 g in 1 BOTTLE, PUMP (62670-3566-3)",
"NDC11Code": "62670-3566-03",
"ProductNDC": "62670-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-bacterial Deep Cleansing Hand Soap",
"ProprietaryNameSuffix": "Cucumber Melon",
"NonProprietaryName": "Triclosan",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333",
"LabelerName": "Bath & Body Works, Inc.",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": "3",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2014-03-05"
},
{
"NDCCode": "63629-3566-1",
"PackageDescription": "1 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-3566-1) ",
"NDC11Code": "63629-3566-01",
"ProductNDC": "63629-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Toprol",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19920201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019962",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19920201",
"SamplePackage": "N"
},
{
"NDCCode": "68071-3566-1",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (68071-3566-1) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "68071-3566-01",
"ProductNDC": "68071-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076513",
"LabelerName": "NuCare Pharmceuticals,Inc.",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Active",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:.",
"Description": "Ofloxacin ophthalmic solution, USP 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use."
},
{
"NDCCode": "68151-3566-8",
"PackageDescription": "1 TABLET in 1 PACKAGE (68151-3566-8)",
"NDC11Code": "68151-3566-08",
"ProductNDC": "68151-3566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prandin",
"NonProprietaryName": "Repaglinide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20000103",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020741",
"LabelerName": "Carilion Materials Management",
"SubstanceName": "REPAGLINIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glinide [EPC],Potassium Channel Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "PRANDIN is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "PRANDIN® (repaglinide) is an oral blood glucose-lowering drug of the meglitinide class used in the management of type 2 diabetes mellitus (also known as non-insulin dependent diabetes mellitus or NIDDM). Repaglinide, S(+)2-ethoxy-4(2((3-methyl-1-(2-(1-piperidinyl) phenyl)-butyl) amino)-2-oxoethyl) benzoic acid, is chemically unrelated to the oral sulfonylurea insulin secretagogues. The structural formula is as shown below. Repaglinide is a white to off-white powder with molecular formula C27 H36 N2 O4 and a molecular weight of 452.6. PRANDIN tablets contain 0.5 mg, 1 mg, or 2 mg of repaglinide. In addition each tablet contains the following inactive ingredients: calcium hydrogen phosphate (anhydrous), microcrystalline cellulose, maize starch, polacrilin potassium, povidone, glycerol (85%), magnesium stearate, meglumine, and poloxamer. The 1 mg and 2 mg tablets contain iron oxides (yellow and red, respectively) as coloring agents."
},
{
"NDCCode": "70518-3566-0",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (70518-3566-0) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "70518-3566-00",
"ProductNDC": "70518-3566",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Claritin-d",
"ProprietaryNameSuffix": "12 Hour",
"NonProprietaryName": "Loratadine And Pseudoephedrine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20221031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019670",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LORATADINE; PSEUDOEPHEDRINE SULFATE",
"StrengthNumber": "5; 120",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221031",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: sneezingitchy, watery eyesrunny noseitching of the nose or throat. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "17856-0007-1",
"PackageDescription": "72 CUP in 1 BOX (17856-0007-1) > 10 mL in 1 CUP",
"NDC11Code": "17856-0007-01",
"ProductNDC": "17856-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfatrim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19830701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018615",
"LabelerName": "Atlantic Biologicals Corps",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "200; 40",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose."
},
{
"NDCCode": "17856-0007-2",
"PackageDescription": "20 mL in 1 CUP (17856-0007-2)",
"NDC11Code": "17856-0007-02",
"ProductNDC": "17856-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfatrim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19830701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018615",
"LabelerName": "Atlantic Biologicals Corps",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "200; 40",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose."
},
{
"NDCCode": "17856-0007-5",
"PackageDescription": "5 mL in 1 CUP (17856-0007-5)",
"NDC11Code": "17856-0007-05",
"ProductNDC": "17856-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfatrim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19830701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018615",
"LabelerName": "Atlantic Biologicals Corps",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "200; 40",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose."
},
{
"NDCCode": "17856-0008-2",
"PackageDescription": "1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (17856-0008-2) ",
"NDC11Code": "17856-0008-02",
"ProductNDC": "17856-0008",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucinex",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120703",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021282",
"LabelerName": "ATLANTIC BIOLOGICAS CORP.",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240605",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "17856-0010-4",
"PackageDescription": "100 DOSE PACK in 1 CONTAINER (17856-0010-4) > 1 TABLET, COATED in 1 DOSE PACK",
"NDC11Code": "17856-0010-04",
"ProductNDC": "17856-0010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dialyvite",
"NonProprietaryName": "Ascorbic Acid, Thiamine, Riboflavin, Niacinamide, Pyridoxine, Folic Acid, Cobalamin, Biotin, Pantothenic Acid",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19880801",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Atlantic Biologicals Corps",
"SubstanceName": "ASCORBIC ACID; THIAMINE MONONITRATE; RIBOFLAVIN; NIACINAMIDE; PYRIDOXINE HYDROCHLORIDE; FOLIC ACID; COBALAMIN; BIOTIN; CALCIUM PANTOTHENATE",
"StrengthNumber": "100; 1.5; 1.7; 20; 10; 1; 6; 300; 10",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; ug/1; mg/1",
"Pharm_Classes": "Vitamin C [EPC],Ascorbic Acid [CS],Vitamin B6 Analog [EPC],Vitamin B 6 [Chemical/Ingredient],Analogs/Derivatives [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Dialyvite is a prescription folic acid supplement with additional nutrients indicated for use in improving the nutritional status of renal dialysis patients.",
"Description": "Dialyvite is a prescription folic acid supplement with additional nutrients for kidney dialysis patients. Dialyvite is a small, round, light pink, clear-coated tablet, with debossed \"H\" on one side. Each tablet contains. Folic Acid.....1 mg. Vitamin C (Ascorbic Acid).....100 mg. Thiamine (Thiamine Mononitrate).....1.5 mg. Riboflavin.....1.7 mg. Niacinamide.....20 mg. Vitamin B6 (Pyridoxine HCl).....10 mg. Vitamin B12 (Methylcobalamin).....6 mcg. Biotin.....300 mcg. Pantothenic Acid (Calcium Pantothenate).....10 mg. Inactive ingredients. Microcrystalline Cellulose, Croscarmellose Sodium, Mono- and Diglycerides, Starch, Hypromellose, Polyethylene Glycol, Calcium Stearate, Carmine (color)."
},
{
"NDCCode": "17856-0016-1",
"PackageDescription": "5 mL in 1 CUP, UNIT-DOSE (17856-0016-1) ",
"NDC11Code": "17856-0016-01",
"ProductNDC": "17856-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20180303",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "ATLANTIC BIOLOGICALS CORP",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "20",
"StrengthUnit": "mg/5mL",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "A. Sedative. B. Anticonvulsant- For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in either, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C12H12N2O3. Its molecular weight is 232.24. It has the following structural formula. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoon) contains 20 mg Phenobarbital and Alcohol 15%. The oral solution also contains FD&C Red #40, orange flavor, glycerin, sucrose, and water."
},
{
"NDCCode": "17856-0016-2",
"PackageDescription": "5 mL in 1 SYRINGE (17856-0016-2) ",
"NDC11Code": "17856-0016-02",
"ProductNDC": "17856-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20180303",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "ATLANTIC BIOLOGICALS CORP",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "20",
"StrengthUnit": "mg/5mL",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "A. Sedative. B. Anticonvulsant- For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in either, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C12H12N2O3. Its molecular weight is 232.24. It has the following structural formula. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoon) contains 20 mg Phenobarbital and Alcohol 15%. The oral solution also contains FD&C Red #40, orange flavor, glycerin, sucrose, and water."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>17856-3566-1</NDCCode>
<PackageDescription>2 mL in 1 CUP (17856-3566-1) </PackageDescription>
<NDC11Code>17856-3566-01</NDC11Code>
<ProductNDC>17856-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075873</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>17856-3566-3</NDCCode>
<PackageDescription>5 mL in 1 CUP (17856-3566-3) </PackageDescription>
<NDC11Code>17856-3566-03</NDC11Code>
<ProductNDC>17856-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075873</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>17856-3566-5</NDCCode>
<PackageDescription>48 SYRINGE in 1 BOX, UNIT-DOSE (17856-3566-5) / 5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>17856-3566-05</NDC11Code>
<ProductNDC>17856-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075873</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl Syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use (see ). WARNINGSMIDAZOLAM HCL SYRUP MUST BE USED AS SPECIFIED IN THE LABEL. Midazolam is associated with a high incidence of partial or complete impairment of recall for the next several hours (see ). CLINICAL PHARMACOLOGY.</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. in situH. Midazolam hydrochloride has the molecular formula C H ClFN·HCl, a calculated molecular weight of 362.25 and the following structural formula: 1813. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0002-3566-11</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-3566-11) / 2.4 mL in 1 SYRINGE (0002-3566-01) </PackageDescription>
<NDC11Code>00002-3566-11</NDC11Code>
<ProductNDC>0002-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260120</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>4.17</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-3566-99</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-3566-99) / 2.4 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-3566-99</NDC11Code>
<ProductNDC>0002-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260120</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>4.17</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260301</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0054-3566-99</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE, GLASS (0054-3566-99) </PackageDescription>
<NDC11Code>00054-3566-99</NDC11Code>
<ProductNDC>0054-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075873</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with bitterness modifier, artificial cherry-brandy flavor, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, sodium benzoate, sodium citrate, sodium saccharin, sorbitol solution, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. Midazolam Open-ring Form. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>0378-3566-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0378-3566-01) </PackageDescription>
<NDC11Code>00378-3566-01</NDC11Code>
<ProductNDC>0378-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<EndMarketingDate>20190331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076584</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC],Diphosphonates [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<EndMarketingDatePackage>20190331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-3566-93</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (0378-3566-93)</PackageDescription>
<NDC11Code>00378-3566-93</NDC11Code>
<ProductNDC>0378-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076584</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC],Diphosphonates [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>0480-3566-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0480-3566-01) </PackageDescription>
<NDC11Code>00480-3566-01</NDC11Code>
<ProductNDC>0480-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202802</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells contain gelatin and titanium dioxide. The 10 mg capsule shells also contain D&C Red #28, FD&C Blue #1, and FD&C Red #40. The 20 mg capsule shells also contain yellow iron oxide. The 30 mg capsule shells also contain D&C Red #28, FD&C Blue #1, FD&C Red #40 and yellow iron oxide. The 40 mg capsule shells also contain D&C Yellow #10, FD&C Green #3, and yellow iron oxide. The 50 mg capsule shells also contain FD&C Blue #1 and yellow iron oxide. The 60 mg capsule shells also contain D&C Yellow #10 and FD&C Green #3. The 70 mg capsule shells also contain FD&C Red #40 and yellow iron oxide. The capsules are printed with black ink which contains black iron oxide, potassium hydroxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>37662-3566-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-3566-1) </PackageDescription>
<NDC11Code>37662-3566-01</NDC11Code>
<ProductNDC>37662-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aluminium Fluoratum</ProprietaryName>
<NonProprietaryName>Aluminium Fluoratum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230710</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALUMINUM FLUORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3566-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-3566-2) </PackageDescription>
<NDC11Code>37662-3566-02</NDC11Code>
<ProductNDC>37662-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aluminium Fluoratum</ProprietaryName>
<NonProprietaryName>Aluminium Fluoratum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230710</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALUMINUM FLUORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3566-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-3566-3) </PackageDescription>
<NDC11Code>37662-3566-03</NDC11Code>
<ProductNDC>37662-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aluminium Fluoratum</ProprietaryName>
<NonProprietaryName>Aluminium Fluoratum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230710</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALUMINUM FLUORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3566-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-3566-4) </PackageDescription>
<NDC11Code>37662-3566-04</NDC11Code>
<ProductNDC>37662-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aluminium Fluoratum</ProprietaryName>
<NonProprietaryName>Aluminium Fluoratum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230710</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ALUMINUM FLUORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-3566-0</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (50090-3566-0) > 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>50090-3566-00</NDC11Code>
<ProductNDC>50090-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20151207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206306</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.11</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine hydrochloride ophthalmic solution USP, 0.1% is indicated for the treatment of the signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
<Description>Olopatadine hydrochloride ophthalmic solution USP, 0.1% is a sterile ophthalmic solution containing olopatadine, a relatively selective H1 -receptor antagonist and inhibitor of histamine release from the mast cell for topical administration to the eyes. Olopatadine hydrochloride is a white, crystalline, water-soluble powder with a molecular weight of 373.88. The chemical structure is presented below. Chemical Name: 11-[(Z)-3-(Dimethylamino)propylidene]-6-11-dihydrodibenz[b,e] oxepin-2-acetic acid hydrochloride. Each mL of Olopatadine hydrochloride ophthalmic solution, USP contains:. Active: 1.11 mg olopatadine hydrochloride, USP equivalent to 1 mg olopatadine. Preservative: benzalkonium chloride 0.01%. Inactives: dibasic sodium phosphate; sodium chloride; hydrochloric acid/sodium hydroxide (adjust pH); and water for injection. It has a pH of approximately 7 and an osmolality of approximately 300 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>54868-3566-0</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (54868-3566-0) > 1 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>54868-3566-00</NDC11Code>
<ProductNDC>54868-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20070110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074300</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>54868-3566-1</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (54868-3566-1) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>54868-3566-01</NDC11Code>
<ProductNDC>54868-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20070110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074300</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>54868-3566-2</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (54868-3566-2) > 1 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>54868-3566-02</NDC11Code>
<ProductNDC>54868-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20070110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074300</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Status Epilepticus. Lorazepam Injection is indicated for the treatment of status epilepticus. Preanesthetic. Lorazepam Injection is indicated in adult patients for preanesthetic medication, producing sedation (sleepiness or drowsiness), relief of anxiety, and a decreased ability to recall events related to the day of surgery. It is most useful in those patients who are anxious about their surgical procedure and who would prefer to have diminished recall of the events of the day of surgery (see “PRECAUTIONS”- Information for Patients).</IndicationAndUsage>
<Description>Lorazepam, a benzodiazepine with antianxiety and sedative and anticonvulsant effects, is intended for intramuscular or intravenous route of administration. It has the chemical formula 7-Chloro-5-(2-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The molecular formula is C15H10Cl2N202. The structural formula is. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains either 2 or 4 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>55154-3566-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-3566-0) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-3566-00</NDC11Code>
<ProductNDC>55154-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077580</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol is indicated for use in the management of manifestations of psychotic disorders. Haloperidol is indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol is effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol is also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4'-fluorobutyrophenone. It has the following structural formula. Each haloperidol tablet, USP intended for oral administration contains haloperidol, USP 0.5 mg or 1 mg or 2 mg or 5 mg or 10 mg or 20 mg. In addition each 0.5 mg, 1 mg, 2 mg tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize) and each 5 mg, 10 mg, 20 mg tablet contains the following inactive ingredients: calcium stearate, dibasic calcium phosphate dihydrate, povidone (PVP K 30), sodium starch glycolate and starch. 1 mg: D&C Yellow #10 Aluminium Lake, FD&C Yellow #6 Aluminium Lake; 2 mg: D & C Red #27 Aluminum Lake; 5 mg: D & C Yellow #10 Aluminum Lake and FD & C Blue #1 Aluminum Lake; 10 mg: D & C Yellow #10 Aluminum Lake and FD & C Blue #1 Aluminum Lake; 20 mg: FD & C Yellow #6 Aluminum Lake and D & C Red #27 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>62670-3566-3</NDCCode>
<PackageDescription>242 g in 1 BOTTLE, PUMP (62670-3566-3)</PackageDescription>
<NDC11Code>62670-3566-03</NDC11Code>
<ProductNDC>62670-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-bacterial Deep Cleansing Hand Soap</ProprietaryName>
<ProprietaryNameSuffix>Cucumber Melon</ProprietaryNameSuffix>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333</ApplicationNumber>
<LabelerName>Bath & Body Works, Inc.</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-03-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>63629-3566-1</NDCCode>
<PackageDescription>1 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-3566-1) </PackageDescription>
<NDC11Code>63629-3566-01</NDC11Code>
<ProductNDC>63629-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Toprol</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019962</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68071-3566-1</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (68071-3566-1) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>68071-3566-01</NDC11Code>
<ProductNDC>68071-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076513</ApplicationNumber>
<LabelerName>NuCare Pharmceuticals,Inc.</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:.</IndicationAndUsage>
<Description>Ofloxacin ophthalmic solution, USP 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use.</Description>
</NDC>
<NDC>
<NDCCode>68151-3566-8</NDCCode>
<PackageDescription>1 TABLET in 1 PACKAGE (68151-3566-8)</PackageDescription>
<NDC11Code>68151-3566-08</NDC11Code>
<ProductNDC>68151-3566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prandin</ProprietaryName>
<NonProprietaryName>Repaglinide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000103</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020741</ApplicationNumber>
<LabelerName>Carilion Materials Management</LabelerName>
<SubstanceName>REPAGLINIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glinide [EPC],Potassium Channel Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>PRANDIN is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>PRANDIN® (repaglinide) is an oral blood glucose-lowering drug of the meglitinide class used in the management of type 2 diabetes mellitus (also known as non-insulin dependent diabetes mellitus or NIDDM). Repaglinide, S(+)2-ethoxy-4(2((3-methyl-1-(2-(1-piperidinyl) phenyl)-butyl) amino)-2-oxoethyl) benzoic acid, is chemically unrelated to the oral sulfonylurea insulin secretagogues. The structural formula is as shown below. Repaglinide is a white to off-white powder with molecular formula C27 H36 N2 O4 and a molecular weight of 452.6. PRANDIN tablets contain 0.5 mg, 1 mg, or 2 mg of repaglinide. In addition each tablet contains the following inactive ingredients: calcium hydrogen phosphate (anhydrous), microcrystalline cellulose, maize starch, polacrilin potassium, povidone, glycerol (85%), magnesium stearate, meglumine, and poloxamer. The 1 mg and 2 mg tablets contain iron oxides (yellow and red, respectively) as coloring agents.</Description>
</NDC>
<NDC>
<NDCCode>70518-3566-0</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (70518-3566-0) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70518-3566-00</NDC11Code>
<ProductNDC>70518-3566</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Claritin-d</ProprietaryName>
<ProprietaryNameSuffix>12 Hour</ProprietaryNameSuffix>
<NonProprietaryName>Loratadine And Pseudoephedrine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221031</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019670</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LORATADINE; PSEUDOEPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>5; 120</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: sneezingitchy, watery eyesrunny noseitching of the nose or throat. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>17856-0007-1</NDCCode>
<PackageDescription>72 CUP in 1 BOX (17856-0007-1) > 10 mL in 1 CUP</PackageDescription>
<NDC11Code>17856-0007-01</NDC11Code>
<ProductNDC>17856-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfatrim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018615</ApplicationNumber>
<LabelerName>Atlantic Biologicals Corps</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>200; 40</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose.</Description>
</NDC>
<NDC>
<NDCCode>17856-0007-2</NDCCode>
<PackageDescription>20 mL in 1 CUP (17856-0007-2)</PackageDescription>
<NDC11Code>17856-0007-02</NDC11Code>
<ProductNDC>17856-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfatrim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018615</ApplicationNumber>
<LabelerName>Atlantic Biologicals Corps</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>200; 40</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose.</Description>
</NDC>
<NDC>
<NDCCode>17856-0007-5</NDCCode>
<PackageDescription>5 mL in 1 CUP (17856-0007-5)</PackageDescription>
<NDC11Code>17856-0007-05</NDC11Code>
<ProductNDC>17856-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfatrim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018615</ApplicationNumber>
<LabelerName>Atlantic Biologicals Corps</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>200; 40</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim oral suspension and other antibacterial drugs, sulfamethoxazole and trimethoprim oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim per 5 mL for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C10H11N3O3S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula is. Trimethoprim is 2,4-diamino-5-(3,4,5- trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and. It has the following structural formula is. INACTIVE INGREDIENTS: alcohol (less than 0.5%), carboxymethylcellulose sodium, citric acid, FD&C Red #40, FD&C Yellow #6, cherry flavor, methylparaben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, propylene glycol, propylparaben, purified water, saccharin sodium, simethicone emulsion, sucrose.</Description>
</NDC>
<NDC>
<NDCCode>17856-0008-2</NDCCode>
<PackageDescription>1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (17856-0008-2) </PackageDescription>
<NDC11Code>17856-0008-02</NDC11Code>
<ProductNDC>17856-0008</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucinex</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120703</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021282</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICAS CORP.</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>17856-0010-4</NDCCode>
<PackageDescription>100 DOSE PACK in 1 CONTAINER (17856-0010-4) > 1 TABLET, COATED in 1 DOSE PACK</PackageDescription>
<NDC11Code>17856-0010-04</NDC11Code>
<ProductNDC>17856-0010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dialyvite</ProprietaryName>
<NonProprietaryName>Ascorbic Acid, Thiamine, Riboflavin, Niacinamide, Pyridoxine, Folic Acid, Cobalamin, Biotin, Pantothenic Acid</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880801</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Atlantic Biologicals Corps</LabelerName>
<SubstanceName>ASCORBIC ACID; THIAMINE MONONITRATE; RIBOFLAVIN; NIACINAMIDE; PYRIDOXINE HYDROCHLORIDE; FOLIC ACID; COBALAMIN; BIOTIN; CALCIUM PANTOTHENATE</SubstanceName>
<StrengthNumber>100; 1.5; 1.7; 20; 10; 1; 6; 300; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; ug/1; mg/1</StrengthUnit>
<Pharm_Classes>Vitamin C [EPC],Ascorbic Acid [CS],Vitamin B6 Analog [EPC],Vitamin B 6 [Chemical/Ingredient],Analogs/Derivatives [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dialyvite is a prescription folic acid supplement with additional nutrients indicated for use in improving the nutritional status of renal dialysis patients.</IndicationAndUsage>
<Description>Dialyvite is a prescription folic acid supplement with additional nutrients for kidney dialysis patients. Dialyvite is a small, round, light pink, clear-coated tablet, with debossed "H" on one side. Each tablet contains. Folic Acid.....1 mg. Vitamin C (Ascorbic Acid).....100 mg. Thiamine (Thiamine Mononitrate).....1.5 mg. Riboflavin.....1.7 mg. Niacinamide.....20 mg. Vitamin B6 (Pyridoxine HCl).....10 mg. Vitamin B12 (Methylcobalamin).....6 mcg. Biotin.....300 mcg. Pantothenic Acid (Calcium Pantothenate).....10 mg. Inactive ingredients. Microcrystalline Cellulose, Croscarmellose Sodium, Mono- and Diglycerides, Starch, Hypromellose, Polyethylene Glycol, Calcium Stearate, Carmine (color).</Description>
</NDC>
<NDC>
<NDCCode>17856-0016-1</NDCCode>
<PackageDescription>5 mL in 1 CUP, UNIT-DOSE (17856-0016-1) </PackageDescription>
<NDC11Code>17856-0016-01</NDC11Code>
<ProductNDC>17856-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>ATLANTIC BIOLOGICALS CORP</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>A. Sedative. B. Anticonvulsant- For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in either, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C12H12N2O3. Its molecular weight is 232.24. It has the following structural formula. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoon) contains 20 mg Phenobarbital and Alcohol 15%. The oral solution also contains FD&C Red #40, orange flavor, glycerin, sucrose, and water.</Description>
</NDC>
<NDC>
<NDCCode>17856-0016-2</NDCCode>
<PackageDescription>5 mL in 1 SYRINGE (17856-0016-2) </PackageDescription>
<NDC11Code>17856-0016-02</NDC11Code>
<ProductNDC>17856-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>ATLANTIC BIOLOGICALS CORP</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>A. Sedative. B. Anticonvulsant- For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in either, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C12H12N2O3. Its molecular weight is 232.24. It has the following structural formula. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoon) contains 20 mg Phenobarbital and Alcohol 15%. The oral solution also contains FD&C Red #40, orange flavor, glycerin, sucrose, and water.</Description>
</NDC>
</NDCList>